Eddie Hung
721f6a14fb
read_aiger to accept empty string for clk_name, passable only if no latches
2019-02-25 15:34:02 -08:00
Eddie Hung
0ca3fd6a1c
abc9 not to clean after aigmap
2019-02-25 15:31:52 -08:00
Eddie Hung
51f28a6747
abc9 to call "clean" once at the end of all abc9_module() calls
2019-02-25 12:55:47 -08:00
Clifford Wolf
c258b99040
Minor changes ontop of 71bcc4c: Remove hierarchy warning that is redundant to -check
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-02-24 20:41:36 +01:00
Clifford Wolf
c118f9a377
Merge pull request #812 from ucb-bar/arrayhierarchyfixes
...
Define basic_cell_type() function and use it to derive the cell type …
2019-02-24 11:39:13 -08:00
Clifford Wolf
cd722f26a5
Cleanups in ARST handling in wreduce
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-02-24 20:34:23 +01:00
Clifford Wolf
da14bc8524
Merge pull request #824 from litghost/fix_reduce_on_ff
...
Fix WREDUCE on FF not fixing ARST_VALUE parameter.
2019-02-24 11:29:14 -08:00
Jim Lawson
71bcc4c644
Address requested changes - don't require non-$ name.
...
Suppress warning if name does begin with a `$`.
Fix hierachy tests so they have something to grep.
Announce hierarchy test types.
2019-02-22 16:06:10 -08:00
Keith Rothman
25680f6a07
Fix WREDUCE on FF not fixing ARST_VALUE parameter.
...
Adds test case that fails without code change.
Signed-off-by: Keith Rothman <537074+litghost@users.noreply.github.com>
2019-02-22 10:30:42 -08:00
Eddie Hung
d56f02d1fc
abc9 to use AIGER symbol table, as opposed to map file
2019-02-21 17:03:40 -08:00
Clifford Wolf
344afdcd5f
Merge pull request #740 from daveshah1/improve_dress
...
Improve ABC netname preservation
2019-02-22 01:16:34 +01:00
Eddie Hung
2811d66dea
Revert "abc9 to write_xaiger -symbols, not -map"
...
This reverts commit 04429f8152
.
2019-02-21 14:58:40 -08:00
Eddie Hung
7ad9628f07
Remove irrelevant citations
2019-02-21 14:41:11 -08:00
Eddie Hung
085ed9f487
Add attribution
2019-02-21 14:40:13 -08:00
Eddie Hung
875a02a6f2
abc9 to not select anything extra, and pop selection after final clean
2019-02-21 14:38:52 -08:00
Eddie Hung
04429f8152
abc9 to write_xaiger -symbols, not -map
2019-02-21 14:28:36 -08:00
Eddie Hung
3307295488
Merge branch 'read_aiger' into xaig
2019-02-21 14:27:32 -08:00
Eddie Hung
7f8f36273a
abc9 to use &mfs
2019-02-21 13:16:24 -08:00
Eddie Hung
a8803a1519
Merge remote-tracking branch 'origin/master' into xaig
2019-02-21 11:23:00 -08:00
Eddie Hung
6b96df41bc
abc9 to only disconnect output ports of AND and NOT gates
2019-02-21 11:15:47 -08:00
Clifford Wolf
d55790909c
Hotfix for 4c82ddf
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-02-21 19:27:23 +01:00
Keith Rothman
4c82ddf394
Add -params mode to force undef parameters in selected cells.
...
Signed-off-by: Keith Rothman <537074+litghost@users.noreply.github.com>
2019-02-21 10:16:38 -08:00
Clifford Wolf
0e371109b0
Merge pull request #818 from YosysHQ/clifford/dffsrfix
...
Fix opt_rmdff handling of $_DFFSR_???_ and $_DLATCHSR_???_, fixes #816
2019-02-21 18:58:44 +01:00
Clifford Wolf
893194689d
Fix typo in passes/pmgen/README.md
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-02-21 18:50:02 +01:00
Eddie Hung
be061810d7
Merge branch 'clifford/dffsrfix' of https://github.com/YosysHQ/yosys into xaig
2019-02-21 09:31:17 -08:00
Clifford Wolf
2da4c9c8f0
Fix opt_rmdff handling of $_DFFSR_???_ and $_DLATCHSR_???_, fixes #816
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-02-21 13:49:45 +01:00
Clifford Wolf
2fe1c830eb
Bugfix in ice40_dsp
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-02-21 13:28:46 +01:00
Eddie Hung
7f26043caf
ABC -> ABC9
2019-02-20 17:36:57 -08:00
Eddie Hung
e5b8bb9faa
abc9 to disconnect mapped_mods POs correctly, and do not count $_NOT_
2019-02-20 17:33:35 -08:00
Eddie Hung
32853b1f8d
lut/not/and suffix to be ${lut,not,and}
2019-02-20 16:30:30 -08:00
Eddie Hung
2ca83005fb
abc9 to cope with multiple modules
2019-02-20 12:56:15 -08:00
Eddie Hung
d6b317b349
abc9 to use & syntax for -fast, and name fixes
2019-02-20 12:40:17 -08:00
Clifford Wolf
218e9051bb
Add "synth_ice40 -dsp"
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-02-20 16:42:27 +01:00
Clifford Wolf
246391200e
Add FF support to wreduce
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-02-20 16:36:42 +01:00
Clifford Wolf
dca65d83a0
Detect and reject cases that do not map well to iCE40 DSPs (yet)
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-02-20 11:18:19 +01:00
Eddie Hung
62e5ff9ba8
abc9 to cope with indexed wires when creating $lut from $_NOT_
2019-02-19 16:06:03 -08:00
Jim Lawson
5c4a72c43e
Fix normal (non-array) hierarchy -auto-top.
...
Add simple test.
2019-02-19 14:35:15 -08:00
Eddie Hung
8158bc3f99
abc9 to replace $_NOT_ with $lut
2019-02-19 12:30:20 -08:00
Clifford Wolf
5a853ed46c
Add actual DSP inference to ice40_dsp pass
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-02-17 15:35:48 +01:00
Clifford Wolf
c06c062469
Merge branch 'master' of github.com:YosysHQ/yosys into pmgen
2019-02-17 12:10:19 +01:00
Eddie Hung
45d49d5d14
Get rid of debugging stuff in abc9
2019-02-16 22:25:22 -08:00
Eddie Hung
f853b2f3c1
abc9 to write_aiger with -O option, and ignore dummy outputs
2019-02-16 20:09:40 -08:00
Eddie Hung
d8c4d4e6c7
abc9 to handle comb loops, cope with constant outputs, disconnect using new wire
2019-02-16 13:47:38 -08:00
Eddie Hung
e7c7ab8fc0
expose command to not skip 'internal' wires beginning with '$'
2019-02-16 13:45:17 -08:00
Eddie Hung
d4545d415b
abc9 to cope with non-wideports, count cells properly
2019-02-16 08:53:06 -08:00
Eddie Hung
f8d0134598
Move lookup inside if
2019-02-15 15:23:26 -08:00
Eddie Hung
a786ac4d53
Refactor
2019-02-15 13:00:13 -08:00
Eddie Hung
914546efd9
Cope with width != 1 when re-mapping cells
2019-02-15 12:55:52 -08:00
Eddie Hung
956ee545c5
abc9 to stitch results with CI/CO properly
2019-02-15 11:52:34 -08:00
Jim Lawson
5c504c5ae6
Define basic_cell_type() function and use it to derive the cell type for array references (instead of duplicating the code).
2019-02-15 11:31:37 -08:00
Eddie Hung
206f11dca3
Fix stitching
2019-02-13 17:04:23 -08:00
Eddie Hung
f0f5d8a5cc
Merge remote-tracking branch 'origin/read_aiger' into xaig
2019-02-13 14:09:36 -08:00
Eddie Hung
06cf0555ee
Merge https://github.com/YosysHQ/yosys into xaig
2019-02-13 14:08:31 -08:00
Eddie Hung
87f059adf7
Rip out some more stuff
2019-02-13 10:44:52 -08:00
Eddie Hung
045f7763ae
Rip out unused functions in abc9
2019-02-12 16:25:22 -08:00
Eddie Hung
b3341b4abb
WIP for ABC with aiger
2019-02-12 09:31:22 -08:00
Eddie Hung
c23e3f0751
Missing headers for Xcode?
2019-02-12 09:24:13 -08:00
Eddie Hung
5a0a5aae4f
Compile abc9
2019-02-08 13:58:47 -08:00
Eddie Hung
e25a22015f
Copy abc.cc to abc9.cc
2019-02-08 13:23:54 -08:00
David Shah
a4515712cb
fsm_opt: Fix runtime error for FSMs without a reset state
...
Signed-off-by: David Shah <dave@ds0.me>
2019-02-07 10:35:36 +00:00
David Shah
58c22dae31
abc: Improved recovered netnames, also preserve src on nets with dress
...
Signed-off-by: David Shah <davey1576@gmail.com>
2019-02-06 22:23:13 +01:00
David Shah
8524a479b1
abc: Preserve naming through ABC using 'dress' command
...
Signed-off-by: David Shah <dave@ds0.me>
2019-02-06 22:23:13 +01:00
whitequark
58d059ccb7
proc_clean: fix critical typo.
2019-01-23 22:08:38 +00:00
whitequark
95b6c35882
proc_clean: fix fully def check to consider compare/signal length.
...
Fixes #790 .
2019-01-18 23:22:19 +00:00
Clifford Wolf
8ddec5d882
Progress in pmgen
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-01-15 11:23:25 +01:00
Clifford Wolf
5216735210
Progress in pmgen, add pmgen README
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-01-15 11:23:25 +01:00
Clifford Wolf
55ac030382
Fix pmgen "reject" statement
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-01-15 11:23:25 +01:00
Clifford Wolf
d45379936b
Progress in pmgen
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-01-15 11:23:25 +01:00
Clifford Wolf
1f8e76f993
Progress in pmgen
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-01-15 11:23:25 +01:00
Clifford Wolf
b9545aa0e1
Progress in pmgen
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-01-15 11:23:25 +01:00
Clifford Wolf
ad69c668ce
Add mockup .pmg (pattern matcher generator) file
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-01-15 11:23:25 +01:00
whitequark
e792bd56b7
flowmap: clean up terminology.
...
* "map": group gates into LUTs;
* "pack": replace gates with LUTs.
This is important because we have FlowMap and DF-Map, and currently
our messages are ambiguous.
Also clean up some other log messages while we're at it.
2019-01-08 02:05:06 +00:00
whitequark
211c26a4c9
flowmap: implement depth relaxation.
2019-01-08 01:13:05 +00:00
Clifford Wolf
8a63fc51d3
Bugfix in $memrd sharing
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-01-07 10:04:47 +01:00
Clifford Wolf
dbd51d7bda
Merge pull request #782 from whitequark/flowmap_dfs
...
flowmap: construct a max-volume max-flow min-cut, not just any one
2019-01-07 09:47:57 +01:00
Clifford Wolf
b5f6e786ea
Switch "bugpoint" from system() to run_command()
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-01-07 09:45:21 +01:00
whitequark
a342d6db49
bugpoint: new pass.
...
A typical use of `bugpoint` would involve a script with a pass under
test, e.g.:
flowmap -relax -optarea 100
and would be invoked as:
bugpoint -yosys ./yosys -script flowmap.ys -clean -cells
This replaces the current design with the minimal design that still
crashes the `flowmap.ys` script.
`bugpoint` can also be used to perform generic design minimization
using `select`, e.g. the following script:
select i:* %x t:$_MUX_ %i -assert-max 0
would remove all parts of the design except for an unbroken path from
an input to an output port that goes through exactly one $_MUX_ cell.
(The condition is inverted.)
2019-01-07 03:13:19 +00:00
whitequark
8b44198e23
flowmap: construct a max-volume max-flow min-cut, not just any one.
2019-01-06 19:51:37 +00:00
Scott Mansell
62c90c4e17
Rename cells based on the wires they drive.
2019-01-06 19:00:16 +13:00
whitequark
2fcc1ee72e
flowmap: add -minlut option, to allow postprocessing with opt_lut.
2019-01-04 21:18:03 +00:00
whitequark
9bc5cf0844
flowmap: cleanup for clarity. NFCI.
2019-01-04 13:04:20 +00:00
whitequark
fd21564deb
flowmap: improve debug graph output. NFC.
2019-01-04 03:30:04 +00:00
whitequark
7850a0c28a
flowmap: add link to longer version of paper. NFC.
2019-01-04 02:33:10 +00:00
Clifford Wolf
d98fe8ce1f
Merge pull request #775 from whitequark/opt_flowmap
...
flowmap: new techmap pass
2019-01-03 17:03:18 +01:00
whitequark
07af772a72
flowmap: new techmap pass.
2019-01-03 14:28:19 +00:00
Clifford Wolf
0fc6e2bfcf
Merge pull request #770 from whitequark/opt_expr_cmp
...
opt_expr: refactor and improve simplification of comparisons
2019-01-02 17:34:04 +01:00
whitequark
bf8db55ef3
opt_expr: improve simplification of comparisons with large constants.
...
The idea behind this simplification is that a N-bit signal X being
compared with an M-bit constant where M>N and the constant has Nth
or higher bit set, it either always succeeds or always fails.
However, the existing implementation only worked with one-hot signals
for some reason. It also printed incorrect messages.
This commit adjusts the simplification to have as much power as
possible, and fixes other bugs.
2019-01-02 15:45:28 +00:00
Clifford Wolf
979de95cf6
Merge pull request #750 from Icenowy/anlogic-ff-init
...
Initialization of Anlogic DFFs
2019-01-02 15:52:22 +01:00
Clifford Wolf
2e606b1802
Merge pull request #773 from whitequark/opt_lut_elim_fixes
...
opt_lut: elimination fixes
2019-01-02 15:45:29 +01:00
whitequark
efa278e232
Fix typographical and grammatical errors and inconsistencies.
...
The initial list of hits was generated with the codespell command
below, and each hit was evaluated and fixed manually while taking
context into consideration.
DIRS="kernel/ frontends/ backends/ passes/ techlibs/"
DIRS="${DIRS} libs/ezsat/ libs/subcircuit"
codespell $DIRS -S *.o -L upto,iff,thru,synopsys,uint
More hits were found by looking through comments and strings manually.
2019-01-02 13:12:17 +00:00
whitequark
c55dfb8369
opt_lut: reflect changes in sigmap.
...
Otherwise, some LUTs will be missed during elimination.
2019-01-02 10:21:58 +00:00
whitequark
06143ab33f
opt_lut: use a worklist, and revisit cells affected by elimination.
2019-01-02 09:36:32 +00:00
whitequark
f7363ac508
opt_lut: count eliminated cells, and set opt.did_something for them.
2019-01-02 09:14:43 +00:00
whitequark
4fd458290c
opt_expr: refactor simplification of unsigned X<onehot and X>=onehot. NFCI.
2019-01-02 05:11:29 +00:00
whitequark
9e9846a6ea
opt_expr: refactor simplification of signed X>=0 and X<0. NFCI.
2019-01-02 03:01:25 +00:00
whitequark
8e53d2e0bf
opt_expr: simplify any unsigned comparisons with all-0 and all-1.
...
Before this commit, only unsigned comparisons with all-0 would be
simplified. This commit also makes the code handling such comparisons
to be more rigorous and not abort on unexpected input.
2019-01-02 02:45:49 +00:00
whitequark
42c356c49c
opt_lut: eliminate LUTs evaluating to constants or inputs.
2018-12-31 23:55:40 +00:00
Clifford Wolf
0a840dd883
Fix handling of (* keep *) wires in wreduce
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-12-31 16:37:40 +01:00
whitequark
18291c20d2
proc_clean: remove any empty cases if all cases use all-def compare.
2018-12-23 09:04:30 +00:00
whitequark
b784440857
proc_clean: remove any empty cases at the end of the switch.
...
Previously, only completely empty switches were removed.
2018-12-22 09:04:46 +00:00
whitequark
0c318e7db5
memory_collect: do not truncate 'x from \INIT.
...
The semantics of an RTLIL constant that has less bits than its
declared bit width is zero padding. Therefore, if the output of
memory_collect will be used for simulation, truncating 'x from
the end of \INIT will produce incorrect simulation results.
2018-12-21 02:01:27 +00:00
David Shah
2b16d4ed3d
memory_dff: Fix typo when checking init value
...
Signed-off-by: David Shah <davey1576@gmail.com>
2018-12-18 17:40:01 +00:00
Icenowy Zheng
256fb8c95c
Add "dffinit -noreinit" parameter
...
Sometimes the FF cell might be initialized during the map process, e.g.
some FPGA platforms (Anlogic Eagle and Lattice ECP5 for example) has
only a "SR" pin for a FF for async reset, that resets the FF to the
initial value, which means the async reset value should be set as the
initial value. In this case the DFFINIT pass shouldn't reinitialize it
to a different value, which will lead to error.
Add a "-noreinit" parameter for the safeguard. If a FF is not
technically initialized before DFFINIT pass, the default value should be
set to x.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
2018-12-18 23:10:40 +08:00
Icenowy Zheng
fec8b3c81f
Add "dffinit -strinit high low"
...
On some platforms the string to initialize DFF might not be "high" and
"low", e.g. with Anlogic TD it's "SET" and "RESET".
Add a "-strinit" parameter for dffinit to allow specify the strings used
for high and low.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
2018-12-18 15:37:43 +08:00
Clifford Wolf
2641a3089b
Revert "Proof-of-concept: preserve naming through ABC using dress"
2018-12-16 21:27:31 +01:00
Clifford Wolf
ddff75b60a
Merge pull request #736 from whitequark/select_assert_list
...
select: print selection if a -assert-* flag causes an error
2018-12-16 16:45:49 +01:00
whitequark
f6412d7109
select: print selection if a -assert-* flag causes an error.
2018-12-16 15:44:29 +00:00
Clifford Wolf
0d9c850a07
Merge pull request #735 from daveshah1/trifixes
...
deminout fixes
2018-12-16 16:02:21 +01:00
Clifford Wolf
f53e19cc71
Fix equiv_opt indenting
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-12-16 15:57:28 +01:00
Clifford Wolf
2a681909df
Merge pull request #724 from whitequark/equiv_opt
...
equiv_opt: new command, for verifying optimization passes
2018-12-16 15:54:26 +01:00
Clifford Wolf
a2154c1be0
Merge pull request #734 from grahamedgecombe/fix-shuffled-bram-initdata
...
memory_bram: Fix initdata bit order after shuffling
2018-12-16 15:53:44 +01:00
Clifford Wolf
a1fb5b1e4b
Merge pull request #714 from daveshah1/abc_preserve_naming
...
Proof-of-concept: preserve naming through ABC using dress
2018-12-16 15:41:30 +01:00
Clifford Wolf
19ca4e2ac3
Merge pull request #722 from whitequark/rename_src
...
rename: add -src, for inferring names from source locations
2018-12-16 15:28:29 +01:00
Clifford Wolf
556341a77f
Merge pull request #720 from whitequark/master
...
lut2mux: handle 1-bit INIT constant in $lut cells
2018-12-16 15:27:23 +01:00
David Shah
4c59447168
deminout: Consider $tribuf cells
...
Signed-off-by: David Shah <dave@ds0.me>
2018-12-12 17:17:40 +00:00
David Shah
d3fe9465f3
deminout: Don't demote constant-driven inouts to inputs
...
Signed-off-by: David Shah <dave@ds0.me>
2018-12-12 16:50:46 +00:00
Graham Edgecombe
4fef9689ab
memory_bram: Fix initdata bit order after shuffling
...
In some cases the memory_bram pass shuffles the order of the bits in a
memory's RD_DATA port. Although the order of the bits in the WR_DATA and
WR_EN ports is changed to match the RD_DATA port, the order of the bits
in the initialization data is not.
This causes reads of initialized memories to return invalid data (until
the initialization data is overwritten).
This commit fixes the bug by shuffling the initdata bits in exactly the
same order as the RD_DATA/WR_DATA/WR_EN bits.
2018-12-11 21:02:49 +00:00
whitequark
7ff5a9db2d
equiv_opt: pass -D EQUIV when techmapping.
...
This allows avoiding techmap crashes e.g. because of large memories
in white-box cell models.
2018-12-07 17:20:34 +00:00
whitequark
c38ea9ae65
equiv_opt: new command, for verifying optimization passes.
2018-12-07 17:20:34 +00:00
whitequark
7ec740b7ad
opt_lut: leave intact LUTs with cascade feeding module outputs.
2018-12-07 17:13:52 +00:00
whitequark
9eb03d458d
opt_lut: show original truth table for both cells.
2018-12-07 17:04:41 +00:00
whitequark
a8ab722824
opt_lut: add -limit option, for debugging misoptimizations.
2018-12-07 16:36:26 +00:00
David Shah
1dfb2fecab
abc: Preserve naming through ABC using 'dress' command
...
Signed-off-by: David Shah <dave@ds0.me>
2018-12-06 15:05:07 +00:00
Clifford Wolf
643f858acf
Bugfix in opt_expr handling of a<0 and a>=0
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-12-06 07:29:21 +01:00
whitequark
a9baee4b24
rename: add -src, for inferring names from source locations.
2018-12-05 20:35:13 +00:00
whitequark
d1f2cb01dc
lut2mux: handle 1-bit INIT constant in $lut cells.
...
This pass already handles INIT constants shorter than 2^width, but
that was not done for the recursion base case.
2018-12-05 19:27:48 +00:00
whitequark
88217d0157
opt_lut: simplify type conversion. NFC.
2018-12-05 19:12:02 +00:00
Clifford Wolf
2d98db73e3
Rename opt_lut.cpp to opt_lut.cc
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-12-05 18:03:58 +01:00
whitequark
45cb6200af
opt_lut: add -dlogic, to avoid disturbing logic such as carry chains.
2018-12-05 16:30:37 +00:00
whitequark
e603484070
opt_lut: always prefer to eliminate 1-LUTs.
...
These are always either buffers or inverters, and keeping the larger
LUT preserves more source-level information about the design.
2018-12-05 16:30:37 +00:00
whitequark
59eea0183f
opt_lut: collect and display statistics.
2018-12-05 16:30:37 +00:00
whitequark
e54c7e951c
opt_lut: refactor to use a worker. NFC.
2018-12-05 16:30:37 +00:00
whitequark
9e072ec21f
opt_lut: new pass, to combine LUTs for tighter packing.
2018-12-05 16:30:37 +00:00
Clifford Wolf
c800e3bb16
Fix typo
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-12-04 23:30:23 +01:00
Clifford Wolf
70c417174d
Merge pull request #702 from smunaut/min_ce_use
...
Add option to only use DFFE is the resulting E signal would be use > N times
2018-12-04 14:29:21 -08:00
Clifford Wolf
47c89d600c
Merge pull request #676 from rafaeltp/master
...
Splits SigSpec into bits before calling check_signal_in_fanout (solves #675 )
2018-12-01 04:11:19 +01:00
Sylvain Munaut
8d3ab626ea
dff2dffe: Add option for unmap to only remove DFFE with low CE signal use
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2018-11-27 21:50:42 +01:00
Clifford Wolf
ab97eddee9
Add iteration limit to "opt_muxtree"
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-11-20 17:56:47 +01:00
Niels Moseley
cfc9b9147c
DFFLIBMAP: changed 'missing pin' error into a warning with additional reason/info.
2018-11-06 12:11:52 +01:00
Clifford Wolf
719e29404a
Allow square brackets in liberty identifiers
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-11-05 12:33:33 +01:00
Niels Moseley
04cd179696
Liberty file newline handling is more relaxed. More descriptive error message
2018-11-03 18:38:49 +01:00
Niels Moseley
d1e8249f9a
Report an error when a liberty file contains pin references that reference non-existing pins
2018-11-03 18:07:51 +01:00
rafaeltp
f8b97e21f3
using [i] to access individual bits of SigSpec and merging bits into a tmp Sig before setting the port to new signal
2018-10-21 11:32:44 -07:00
rafaeltp
7b964bfb83
cleaning up for PR
2018-10-20 18:02:59 -07:00
rafaeltp
ce069830c5
fixing code style
2018-10-20 17:57:26 -07:00
rafaeltp
0ad4321781
solves #675
2018-10-20 17:50:21 -07:00
Ruben Undheim
436e3c0a7c
Refactor code to avoid code duplication + added comments
2018-10-20 16:06:48 +02:00
Ruben Undheim
397dfccb30
Support for SystemVerilog interfaces as a port in the top level module + test case
2018-10-20 11:58:25 +02:00
Clifford Wolf
6514443a5c
Merge pull request #672 from daveshah1/fix_bram
...
memory_bram: Reset make_outreg when growing read ports
2018-10-19 16:09:11 +02:00
David Shah
3420ae5ca5
memory_bram: Reset make_outreg when growing read ports
...
Signed-off-by: David Shah <dave@ds0.me>
2018-10-19 14:46:31 +01:00
Clifford Wolf
f24bc1ed0a
Merge pull request #659 from rubund/sv_interfaces
...
Support for SystemVerilog interfaces and modports
2018-10-18 10:58:47 +02:00
Ruben Undheim
c50afc4246
Documentation improvements etc.
...
- Mention new feature in the SystemVerilog section in the README file
- Commented changes much better
- Rename a few signals to make it clearer
- Prevent warning for unused signals in an easier way
- Add myself as copyright holder to 2 files
- Fix one potential memory leak (delete 'wire' if not in modport)
2018-10-13 20:34:44 +02:00
tklam
f4343b3dc7
stop check_signal_in_fanout from traversing FFs
2018-10-13 23:24:24 +08:00
tklam
302edf0429
stop check_signal_in_fanout from traversing FFs
2018-10-13 23:11:19 +08:00
Ruben Undheim
458a94059e
Support for 'modports' for System Verilog interfaces
2018-10-12 21:11:48 +02:00
Ruben Undheim
75009ada3c
Synthesis support for SystemVerilog interfaces
...
This time doing the changes mostly in AST before RTLIL generation
2018-10-12 21:11:36 +02:00
tklam
b86eb3deef
fix bug: pass by reference
2018-09-26 17:57:39 +08:00
TK Lam
2b89074240
Fix issue #639
2018-09-26 16:11:45 +08:00
Clifford Wolf
592a82c0ad
Merge pull request #625 from aman-goel/master
...
Minor revision to -expose in setundef pass
2018-09-14 12:36:13 +02:00
acw1251
5fe16c25b8
Fixed minor typo in "sim" help message
2018-09-12 18:34:27 -04:00
Aman Goel
75c1f8d241
Minor revision to -expose in setundef pass
...
Adds default value option as -undef when -expose used. Not having set the value mode set can cause the setundef pass to abort.
2018-09-10 21:44:36 -04:00
Benedikt Tutzer
95d65971f3
added some checks if python is enabled to make sure everything compiles if python is disabled in the makefile
2018-08-20 16:04:43 +02:00
Benedikt Tutzer
d87c7df27f
Two passes are not allowed to have the same filename
2018-08-20 15:28:09 +02:00
Benedikt Tutzer
6d18837d62
Python passes are now looked for in share/plugins and can be added by specifying a relative or absolute path
2018-08-20 15:11:06 +02:00
Clifford Wolf
05466790a6
Merge pull request #606 from cr1901/show-win
...
`show` pass `-format` and `-viewer` improvements on Windows
2018-08-19 15:25:46 +02:00
Aman Goel
83b41260f6
Revision to expose option in setundef pass
...
Corrects indentation
Simplifications and corrections
2018-08-18 09:08:07 +05:30
Aman Goel
61f002c908
Merge pull request #3 from YosysHQ/master
...
Updates from official repo
2018-08-18 08:18:40 +05:30
Benedikt Tutzer
d79a2808cf
Python Passes can now be added with the -m option or with the plugin command. There are still issues when run in shell mode, but they can be used just fine in a python script
2018-08-16 16:00:11 +02:00
William D. Jones
7ce7ea2eb4
Update show pass documentation with Windows caveats.
2018-08-15 17:18:19 -04:00
William D. Jones
9f91c62348
Fix run_command() when using -format and -viewer in show pass.
2018-08-15 17:18:19 -04:00
Clifford Wolf
67b1026297
Merge pull request #591 from hzeller/virtual-override
...
Consistent use of 'override' for virtual methods in derived classes.
2018-08-15 14:05:38 +02:00
Clifford Wolf
0eaab6cd1d
Add missing <deque> include (MSVC build fix)
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-07-22 15:21:59 +02:00
Henner Zeller
3aa4484a3c
Consistent use of 'override' for virtual methods in derived classes.
...
o Not all derived methods were marked 'override', but it is a great
feature of C++11 that we should make use of.
o While at it: touched header files got a -*- c++ -*- for emacs to
provide support for that language.
o use YS_OVERRIDE for all override keywords (though we should probably
use the plain keyword going forward now that C++11 is established)
2018-07-20 23:51:06 -07:00
Clifford Wolf
87aef8f0cc
Add async2sync pass
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-07-19 15:31:12 +02:00
Aman Goel
5dcb899e76
Merge pull request #2 from YosysHQ/master
...
Merging with official repo
2018-07-18 11:34:18 -04:00
David Shah
459d367913
ecp5: Adding synchronous set/reset support
...
Signed-off-by: David Shah <davey1576@gmail.com>
2018-07-14 16:18:01 +02:00
Aman Goel
4d343fc1cd
Merging with official repo
2018-07-04 15:14:28 -04:00
Clifford Wolf
5f2bc1ce76
Add automatic verific import in hierarchy command
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-06-20 23:45:01 +02:00
Clifford Wolf
675a44b41a
Be slightly less aggressive in "deminout" pass
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-06-19 14:29:38 +02:00
Edmond Cote
d89560a0ba
Include module name for area summary stats
...
The PR prints the name of the module when displaying the final area count.
Pros:
- Easier for the user to `grep` for area information about a specific module
Cons:
- Arguably more verbose, less "pretty" than author desires
Verification:
~~~~
30c30
< Chip area for this module: 20616.349000
---
> Chip area for module '$paramod$d1738fc0bb353d517bc2caf8fef2abb20bced034\picorv32': 20616.349000
70c70
< Chip area for this module: 88.697700
---
> Chip area for module '\picorv32_axi_adapter': 88.697700
102c102
< Chip area for this module: 20705.046700
---
> Chip area for top module '\picorv32_axi': 20705.046700
~~~~
2018-06-18 17:29:01 -07:00
Clifford Wolf
f273291dfe
Add setundef -anyseq / -anyconst support to -undriven mode
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-06-01 11:57:28 +02:00
Clifford Wolf
4cd6d5556a
Add "setundef -anyconst"
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-06-01 11:49:58 +02:00
Clifford Wolf
3ab79a231b
Bugfix in handling of array instances with empty ports
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-05-31 18:09:31 +02:00
Clifford Wolf
cee4b1e6bc
Disable memory_dff for initialized FFs
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-05-28 17:16:15 +02:00
Clifford Wolf
74efafc1cf
Add some cleanup code to memory_nordff
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-05-28 16:42:06 +02:00
Robert Ou
9763e4d830
Fix infinite loop in abc command under emscripten
2018-05-18 22:42:39 -07:00
Robert Ou
bfce3a7479
Add an option to statically link abc into yosys
...
This is currently incomplete because the output filter no longer works.
2018-05-18 22:35:28 -07:00
Aman Goel
6e63df6dd0
Correction to -expose with setundef
2018-05-15 13:06:23 -04:00
Clifford Wolf
fe80b39f56
Fix iopadmap for loops between tristate IO buffers
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-05-15 14:02:27 +02:00
Clifford Wolf
edd297fb1c
Fix iopadmap for cases where IO pins already have buffers on them
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-05-15 13:13:43 +02:00
Aman Goel
8b9a8c7f91
Minor correction
...
Minor typo error correction in -expose with setundef
2018-05-14 18:58:49 -04:00
Aman Goel
b4a303a1b7
Corrections to option -expose in setundef pass
2018-05-13 20:13:54 -04:00
Aman Goel
9286acb687
Add option -expose to setundef pass
...
Option -expose converts undriven wires to inputs.
Example usage: setundef -undriven -expose [selection]
2018-05-13 16:53:35 -04:00
Clifford Wolf
0fad1570b5
Some cleanups in setundef.cc
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-05-13 16:36:12 +02:00
Christian Krämer
c1ecb1b2f1
Add "#ifdef __FreeBSD__"
...
(Re-commit e3575a8
with corrected author field)
2018-05-13 13:08:26 +02:00
Clifford Wolf
1167538d26
Revert "Add "#ifdef __FreeBSD__""
...
This reverts commit e3575a86c5
.
2018-05-13 13:06:36 +02:00
Clifford Wolf
587056447e
Add optimization of tristate buffer with constant control input
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-05-12 15:18:27 +02:00
Clifford Wolf
11406a8082
Add "hierarchy -simcheck"
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-05-12 13:59:13 +02:00
Johnny Sorocil
e3575a86c5
Add "#ifdef __FreeBSD__"
2018-05-05 13:02:44 +02:00
Clifford Wolf
145c685de0
Add ABC FAQ to "help abc"
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-05-04 21:59:31 +02:00
Clifford Wolf
a572b49538
Replace -ignore_redef with -[no]overwrite
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-05-03 15:25:59 +02:00
Clifford Wolf
705c366a91
Added missing dont_use handling for SR FFs to dfflibmap
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-04-05 11:01:45 +02:00
Clifford Wolf
665eec3d53
Removed $timescale from "sat" command VCD writer
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-03-29 12:38:41 +02:00
Clifford Wolf
ee3c12d6d9
Chenged "extensions_map" to "extensions_list" in hierarchy.cc
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-03-27 14:12:57 +02:00
Sergi Granell
f93f8aaa11
passes/hierarchy: Reduce code duplication in expand_module
...
This also makes it easier to add new file extensions support.
Signed-off-by: Sergi Granell <xerpi.g.12@gmail.com>
2018-03-27 09:35:20 +02:00
Clifford Wolf
491c352da7
Add .sv support to "hierarchy -libdir"
2018-03-26 21:19:00 +02:00
Clifford Wolf
08225f49a4
Add "expose -input"
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-03-12 13:52:52 +01:00
Clifford Wolf
83ffb23739
Add "setundef -undef"
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-03-12 13:52:35 +01:00
Clifford Wolf
a74f805ba0
Fix handling of src attributes in flatten
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-03-10 13:55:30 +01:00
Clifford Wolf
73c01dca65
Add "memory_nordff" pass
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-03-06 23:31:51 +01:00
Clifford Wolf
61a9e2eeb3
Fix connwrappers help message
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-03-04 22:54:34 +01:00
Clifford Wolf
d31584c649
Add $dlatchsr support to clk2fflogic
2018-02-26 12:20:28 +01:00
Clifford Wolf
fba499b866
Fix opt_rmdff handling of $dlatchsr
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-02-26 11:46:05 +01:00
Clifford Wolf
eb67a7532b
Add $allconst and $allseq cell types
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-02-23 13:14:47 +01:00
Clifford Wolf
717abc93a8
Recognize stand-alone obj pattern even when it contains a slash
2018-02-13 14:55:24 +01:00
Clifford Wolf
9337e4999d
Improve log messages in equiv_make
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-01-19 16:20:40 +01:00
Clifford Wolf
9ac560f5d3
Add "dffinit -highlow" and fix synth_intel
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-01-09 18:42:19 +01:00
Clifford Wolf
a96c775a73
Add support for "yosys -E"
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-01-07 16:36:13 +01:00
Clifford Wolf
446ccf1f05
Bugfix in hierarchy blackbox module port width handling
2018-01-07 16:35:22 +01:00
Clifford Wolf
c80315cea4
Bugfix in hierarchy handling of blackbox module ports
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-01-05 13:28:45 +01:00
Clifford Wolf
fefb652d56
Merge pull request #480 from Fatsie/liberty_value_expression
...
Value of properties can be expression.
2018-01-04 13:30:00 +01:00
Clifford Wolf
2d140a44eb
Temporarily derive blackbox modules in hierarchy to evaluate port widths
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-01-04 13:23:29 +01:00
Staf Verhaegen
92eb841f0a
Value of properties can be expression.
...
Example found in the 2007.03 Liberty Reference Manual that was also found
in the wild:
input_voltage(CMOS) {
vil : 0.3 * VDD ;
vih : 0.7 * VDD ;
vimin : -0.5 ;
vimax : VDD + 0.5 ;
}
Current implementation just parses the expression but no interpretation is done.
2018-01-03 21:37:17 +00:00
Clifford Wolf
6132e6e72a
Fix a bug in clk2fflogic memory handling
2017-12-14 03:05:55 +01:00
Clifford Wolf
590e6961cb
Add clk2fflogic memory support
2017-12-14 02:07:31 +01:00
Clifford Wolf
88182e46d7
Check for memories in clk2fflogic
2017-12-13 19:14:34 +01:00
Clifford Wolf
ca2adc30c9
Add warnings for driver-driver conflicts between FFs (and other cells) and constants
2017-12-12 17:13:27 +01:00
Clifford Wolf
9ae25039fb
Add support for editline as replacement for readline
2017-11-08 02:55:00 +01:00
Clifford Wolf
4f31cb6dad
Add "ltp" command
2017-10-31 12:40:25 +01:00
Clifford Wolf
c238f45ecf
Fix memory corruption bug in opt_rmdff
2017-10-26 18:02:15 +02:00
Clifford Wolf
1e502ef5a0
Fix typo in opt_clean log message
2017-10-26 18:01:48 +02:00
Clifford Wolf
716dbc9274
Revert 90be0d8
as it causes endless loops for some designs
2017-10-14 11:57:25 +02:00
Kaj Tuomi
90be0d800b
Fix input vector for reduce cells.
2017-10-12 13:05:10 +03:00
Clifford Wolf
7c57d8fbb4
Rewrite ABC output to include proper net names in timing report
2017-10-10 13:32:58 +02:00
Clifford Wolf
3f22f48eeb
Add blackbox command
2017-10-04 18:30:42 +02:00
Andrew Zonenberg
2b65b65d70
Added missing "break"
2017-09-15 17:54:52 -07:00
Andrew Zonenberg
7b3966714c
Implemented off-chain support for extract_reduce
2017-09-15 13:59:18 -07:00
Andrew Zonenberg
3404934c9c
extract_reduce now only removes the head of the chain, relying on "clean" to delete upstream cells. Added "-allow-off-chain" flag, but it's currently ignored.
2017-09-15 13:59:05 -07:00
Clifford Wolf
ce78717e36
Merge pull request #412 from azonenberg/reduce-fixes
...
extract_reduce: Fix segfault on "undriven" inputs
2017-09-14 22:36:25 +02:00
Robert Ou
ab1bf8d661
extract_reduce: Fix segfault on "undriven" inputs
...
This is easily triggered when un-techmapping if the technology-specific
cell library isn't loaded. Outputs of technology-specific cells will be
seen as inputs, and nets using those outputs will be seen as undriven.
Just ignore these cells because they can't be part of a reduce chain
anyways.
2017-09-14 12:54:44 -07:00
Clifford Wolf
498526cc0b
Merge pull request #411 from azonenberg/counter-extraction-fixes
...
Various improvements and bug fixes to extract_counter
2017-09-14 21:44:26 +02:00
Andrew Zonenberg
66e8986ae7
Minor changes to opt_demorgan requested during code review
2017-09-14 10:35:25 -07:00
Andrew Zonenberg
367d6b2194
Fixed bug where counter extraction on non-GreenPAK devices incorrectly handled parallel counter output
2017-09-14 10:27:10 -07:00
Andrew Zonenberg
c8f2f082c6
Added support for inferring counters with reset to full scale instead of zero
2017-09-14 10:26:43 -07:00
Andrew Zonenberg
122532b7e1
Added RESET_TO_MAX parameter to $__COUNT_ cell. Cannot yet be extracted.
2017-09-14 10:26:32 -07:00
Andrew Zonenberg
0484ad666d
Added support for inferring counters with active-low reset
2017-09-14 10:26:21 -07:00
Andrew Zonenberg
a84172b23b
Initial support for extraction of counters with clock enable
2017-09-14 10:26:10 -07:00
Andrew Zonenberg
c4a70a8cc3
Fixed typo in comment. Fixed bug where extract_counter would create up counters when it meant to create down counters.
2017-09-14 10:25:51 -07:00
Andrew Zonenberg
6da5d36968
Initial version of opt_demorgan is functioning for AND/OR gates. Not the prettiest results for bus inputs, but this can be improved
2017-09-12 18:47:46 -07:00
Clifford Wolf
f9d023c53f
Add src attribute to extra cells generated by proc_dlatch
2017-09-09 10:18:08 +02:00
Clifford Wolf
7d41c5e177
Further improve extract_fa (but still buggy)
2017-09-02 16:39:17 +02:00
Clifford Wolf
18609f3df8
Merge branch 'master' of github.com:cliffordwolf/yosys
2017-09-01 12:35:09 +02:00
Clifford Wolf
8a66bd30c6
Update more stuff to use get_src_attribute() and set_src_attribute()
2017-09-01 12:26:55 +02:00
Jason Lowdermilk
8dc6083de7
updated to use get_src_attribute() and set_src_attribute().
2017-08-31 14:51:56 -06:00
Andrew Zonenberg
ed1e3ed39b
extract_counter: Added optimizations to remove unused high-order bits
2017-08-30 18:15:12 -07:00
Andrew Zonenberg
634f18be96
extract_counter: Minor changes requested to comply with upstream policy, fixed a few typos
2017-08-30 16:28:25 -07:00
Jason Lowdermilk
32c0f1193e
Add support for source line tracking through synthesis phase
2017-08-29 14:46:35 -06:00
Andrew Zonenberg
3fc1b9f3fd
Finished refactoring counter extraction to be nice and generic. Implemented techmapping from $__COUNT_ to GP_COUNTx cells.
2017-08-28 22:18:57 -07:00
Andrew Zonenberg
46b01f05bb
Refactored extract_counter to be generic vs GreenPAK specific
2017-08-28 22:18:47 -07:00
Andrew Zonenberg
b5c15636c5
Refactoring: Renamed greenpak4_counters pass to extract_counter, moved it to techmap/ since it's going to become a generic pass
2017-08-28 22:18:34 -07:00
Clifford Wolf
908f34aafc
Rename recover_reduce to extract_reduce, fix args handling
2017-08-28 19:52:06 +02:00
Clifford Wolf
3aad3ed3da
Merge branch 'recover-reduce' of https://github.com/azonenberg/yosys into azonenberg-recover-reduce
2017-08-28 19:46:17 +02:00
Clifford Wolf
ebbb0e9479
Further improve extract_fa pass
2017-08-28 19:43:26 +02:00
Robert Ou
849b885775
recover_reduce: Update documentation
...
The documentation now describes the commands performed in the deleted
recover_reduce script.
2017-08-27 02:19:19 -07:00
Robert Ou
74d0f17fd4
recover_reduce: Reindent using tabs
2017-08-27 02:12:41 -07:00
Robert Ou
8a5887464c
recover_reduce: Rename recover_reduce_core to recover_reduce
...
Clifford has commented on PR #387 stating that he does not like the
driver script and would prefer to only have the core script with
appropriate notes in the documentation.
Also rename to .cc (rather than .cpp) for consistency.
2017-08-27 02:01:32 -07:00
Robert Ou
99dad40ed0
recover_reduce: Add driver script for the $reduce_* recover feature
...
Conflicts:
passes/techmap/Makefile.inc
2017-08-27 01:57:20 -07:00
Robert Ou
8b7dc792ee
recover_reduce_core: Finish implementing the core function
2017-08-27 01:56:49 -07:00
Robert Ou
fa310c98f8
recover_reduce_core: Initial commit
...
Conflicts:
passes/techmap/Makefile.inc
2017-08-27 01:56:49 -07:00
Clifford Wolf
68c42f3a19
Don't track , ... contradictions through x/z-bits
2017-08-25 16:18:17 +02:00
Clifford Wolf
db6d78a186
Add removing of redundant pairs of bits in ==, ===, !=, and !== to opt_expr
2017-08-25 16:02:15 +02:00
Clifford Wolf
382cc90c65
Further improve extract_fa (seems to be fully functional now)
2017-08-25 13:41:54 +02:00
Clifford Wolf
0bf612506c
Rename "adders" to "extract_fa"
2017-08-25 12:04:40 +02:00
Clifford Wolf
15cdda7c4b
Towards more generic "adder" function extractor
2017-08-23 14:20:10 +02:00
Clifford Wolf
51cbec7f75
Add experimental adders pass
2017-08-22 13:52:13 +02:00
Clifford Wolf
df3e6e1ec9
Remove some dead code from fsm_map
2017-08-21 15:02:16 +02:00
Clifford Wolf
ca53fba44a
Rename "singleton" pass to "uniquify"
2017-08-20 12:31:50 +02:00
Clifford Wolf
d38a64b1cf
More intuitive handling of "cd .." for singleton modules
2017-08-19 00:15:12 +02:00
Clifford Wolf
bbdf7d9c66
Add "sim -zinit -rstlen"
2017-08-18 12:54:17 +02:00
Clifford Wolf
d30cc60ba9
Add "sim" support for memories
2017-08-18 11:44:50 +02:00
Clifford Wolf
0be738eaac
Add support for assert/assume/cover to "sim" command
2017-08-18 10:24:14 +02:00
Clifford Wolf
92e4b5aa77
Add writeback mode to "sim" command
2017-08-17 15:54:51 +02:00
Clifford Wolf
7b4f3f86c3
Improve "sim" command
2017-08-17 12:27:08 +02:00
Clifford Wolf
75046aa531
Add "sim" command skeleton
2017-08-16 13:05:21 +02:00
Clifford Wolf
88983f5012
Mostly coding style related fixes in rmports pass
2017-08-15 11:32:35 +02:00
Clifford Wolf
9fe6bc48a9
Merge branch 'rmports' of https://github.com/azonenberg/yosys into azonenberg-rmports
2017-08-15 11:19:55 +02:00
Robert Ou
9a64ba3338
abc: Allow +/ filenames in the abc command
2017-08-14 12:11:11 -07:00
Andrew Zonenberg
15e41d6363
rmports: Now remove ports from cell instances if we optimized them out of that cell
2017-08-14 11:44:05 -07:00
Andrew Zonenberg
0ee27d0226
ProcessModule is no longer virtual (why was it in the first place?)
2017-08-14 11:18:09 -07:00
Andrew Zonenberg
bd2ac68769
rmports now works on all modules in the design, not just the top.
2017-08-14 11:16:44 -07:00
Andrew Zonenberg
d5e5bbad86
Updated Makefile to reflect opt_rmports being renamed to rmports
2017-08-14 11:04:56 -07:00
Andrew Zonenberg
1a6a23f91a
Renamed opt_rmports pass to rmports
2017-08-14 11:00:45 -07:00
Andrew Zonenberg
1bb150c231
Improved handling of constant connections in opt_rmports
2017-08-14 10:28:19 -07:00
Andrew Zonenberg
2877d5e504
Fixed handling of cell ports that aren't wires
2017-08-14 10:28:16 -07:00
Andrew Zonenberg
3dd7f42e2b
opt_rmports: Fixed incorrect handling of multi-bit nets
2017-08-14 10:28:11 -07:00
Andrew Zonenberg
66aac06eee
Removed commented out debug code
2017-08-14 10:28:04 -07:00
Andrew Zonenberg
cca3cb5fbb
Added opt_rmports pass (remove unconnected ports from top-level modules)
2017-08-14 10:27:59 -07:00
Clifford Wolf
007f29b9c2
Add support for set-reset cell variants to opt_rmdff
2017-08-09 13:29:52 +02:00
Clifford Wolf
c4a7958f70
Add handling of constant reset signals to opt_rmdff
2017-08-06 13:27:18 +02:00
Clifford Wolf
5c09f24e48
Fix typo in "abc" pass help message
2017-07-29 16:21:58 +02:00