This change set contains a number of bug fixes and improvements related to
scoping and resolution in generate and procedural blocks. While many of the
frontend changes are interdependent, it may be possible bring the techmap
changes in under a separate PR.
Declarations within unnamed generate blocks previously encountered issues
because the data declarations were left un-prefixed, breaking proper scoping.
The LRM outlines behavior for generating names for unnamed generate blocks. The
original goal was to add this implicit labelling, but doing so exposed a number
of issues downstream. Additional testing highlighted other closely related scope
resolution issues, which have been fixed. This change also adds support for
block item declarations within unnamed blocks in SystemVerilog mode.
1. Unlabled generate blocks are now implicitly named according to the LRM in
`label_genblks`, which is invoked at the beginning of module elaboration
2. The Verilog parser no longer wraps explicitly named generate blocks in a
synthetic unnamed generate block to avoid creating extra hierarchy levels
where they should not exist
3. The techmap phase now allows special control identifiers to be used outside
of the topmost scope, which is necessary because such wires and cells often
appear in unlabeled generate blocks, which now prefix the declarations within
4. Some techlibs required modifications because they relied on the previous
invalid scope resolution behavior
5. `expand_genblock` has been simplified, now only expanding the outermost
scope, completely deferring the inspection and elaboration of nested scopes;
names are now resolved by looking in the innermost scope and stepping outward
6. Loop variables now always become localparams during unrolling, allowing them
to be resolved and shadowed like any other identifier
7. Identifiers in synthetic function call scopes are now prefixed and resolved
in largely the same manner as other blocks
before: `$func$\func_01$tests/simple/scopes.blk.v:60$5$\blk\x`
after: `\func_01$func$tests/simple/scopes.v:60$5.blk.x`
8. Support identifiers referencing a local generate scope nested more
than 1 level deep, i.e. `B.C.x` while within generate scope `A`, or using a
prefix of a current or parent scope, i.e. `B.C.D.x` while in `A.B`, `A.B.C`,
or `A.B.C.D`
9. Variables can now be declared within unnamed blocks in SystemVerilog mode
Addresses the following issues: 656, 2423, 2493
- Signed cell outputs are sign extended when bound to larger wires
- Signed connections are sign extended when bound to larger cell inputs
- Sign extension is performed in hierarchy and flatten phases
- genrtlil indirects signed constants through signed wires
- Other phases producing RTLIL may need to be updated to preserve
signedness information
- Resolves#1418
- Resolves#2265
When the register being merged into the EN signal happens to be a $sdff,
the current code creates a new $mux for every bit, even if they happen
to be identical (as is usually the case), preventing proper grouping
further down the flow. Fix this by adding a simple cache.
Fixes#2409.
Previously, `$memwr` and `$meminit` cells were always preserved (along
with the memory itself). With this change, they are instead part of the
main cell mark-and-sweep pass: a memory (and its `$meminit` and `$memwr`
cells) is only preserved iff any associated `$memrd` cell needs to be
preserved.
When an adffe is being legalized, and is not natively supported,
prioritize unmapping to adff over converting to dffsre if dffsre is not
natively supported itself.
Fixes#2361.
The only difference between "RTLIL" and "ILANG" is that the latter is
the text representation of the former, as opposed to the in-memory
graph representation. This distinction serves no purpose but confuses
people: it is not obvious that the ILANG backend writes RTLIL graphs.
Passes `write_ilang` and `read_ilang` are provided as aliases to
`write_rtlil` and `read_rtlil` for compatibility.
For connection `assign a = b;`, `sigmap(a)` returns `b`. This is
exactly the opposite of the desired canonicalization for driven bits.
Consider the following code:
module foo(inout a, b);
assign a = b;
endmodule
module bar(output c);
foo f(c, 1'b0);
endmodule
Before this commit, the inout ports would be swapped after flattening
(and cause a crash while attempting to drive a constant value).
This issue was introduced in 9f772eb9.
Fixes#2183.
The main part is converting ice40_dsp to recognize the new FF types
created in opt_dff instead of trying to recognize the mux patterns on
its own.
The fsm call has been moved upwards because the passes cannot deal with
$dffe/$sdff*, and other optimizations don't help it much anyway.
The main part is converting xilinx_dsp to recognize the new FF types
created in opt_dff instead of trying to recognize the patterns on its
own.
The fsm call has been moved upwards because the passes cannot deal with
$dffe/$sdff*, and other optimizations don't help it much anyway.
Before this fix, equiv_induct only assumed that one of the following is
true:
- defined value of A is equal to defined value of B
- A is undefined
This lets through valuations where A is defined, B is undefined, and
the defined (meaningless) value of B happens to match the defined value
of A. Instead, tighten this up to OR of the following:
- defined value of A is equal to defined value of B, and B is not
undefined
- A is undefined
This parameter will resolve to the name of the cell being mapped. The
first user of this parameter will be synth_intel_alm's Quartus output,
which requires a unique (and preferably descriptive) name passed as
a cell parameter for the memory cells.
This fixes some dfflegalize equivalence checks, and breaks others — and
I strongly suspect the others are due to bad support for multiple
async inputs in `proc` (in particular, lack of proper support for
dlatchsr and sketchy circuits on dffsr control inputs).
Those can be created by `opt_dff` when optimizing `$adff` with const
clock, or with D == Q. Make dfflegalize do the opposite transform
when such dlatches would be otherwise unimplementable.
This ensures that, when both sync and async FFs are available and abc9
is involved, the sync FFs will be used, and will thus remain available
for sequential synthesis.
I think these were probably missed by accident. Spotted because GCC
spits out lots of messages like this:
passes/techmap/dfflegalize.cc:114:7: warning: zero-length gnu_printf format string [-Wformat-zero-length]
114 | log("");
| ^~
(because we tell GCC that the first argument to log() looks like a
printf control string in log.h, and a zero length such string triggers
a warning).
Look for unique connections in the containing module with the $anyconst port Y SigBit on the RHS and use those. If no such connection is found, fall back to using the name of the $anyconst port Y SigBit.
The new types include:
- FFs with async reset and enable (`$adffe`, `$_DFFE_[NP][NP][01][NP]_`)
- FFs with sync reset (`$sdff`, `$_SDFF_[NP][NP][01]_`)
- FFs with sync reset and enable, reset priority (`$sdffs`, `$_SDFFE_[NP][NP][01][NP]_`)
- FFs with sync reset and enable, enable priority (`$sdffce`, `$_SDFFCE_[NP][NP][01][NP]_`)
- FFs with async reset, set, and enable (`$dffsre`, `$_DFFSRE_[NP][NP][NP][NP]_`)
- latches with reset or set (`$adlatch`, `$_DLATCH_[NP][NP][01]_`)
The new FF types are not actually used anywhere yet (this is left
for future commits).
1. Infinite loop in the optimization procedure when the first solution found while maximizing is at zero.
2. A signed-ness issue when maximizing.
3. Erroneously entering bisection mode with no wire to optimize.
whitequark
Zachary Snow
Claire Xen
Dan Ravensloft
Miodrag Milanović
Peter Gadfort
Marcelina Kościelnicka
Tobias Faller
umarcor
Larry Doolittle
StefanBruens
Gabriel Somlo
Chris Dailey
Ethan Mahintorabi
N. Engelhardt
Peder Bergebakken Sundt
clairexen
Xiretza
Alberto Gonzalez
Eddie Hung
Rupert Swarbrick