Move `examine_attempted` flag to target struct to make it target specific.
`Info` messages for retry and `Error` messages for failure added.
Change-Id: Id2fbe7dc68d746c936c8412289d0d149fbd80d71
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
The secure microcontroller Infineon SLx2 uses a custom Cortex-M33.
The register CPUID reports value 0x490FDB00.
Reference link to the product:
Link: https://www.infineon.com/cms/en/about-infineon/press/market-news/2022/INFCSS202211-034.html
Change-Id: I8911712c55bd50e24ed53cf49958352f470027a5
Signed-off-by: Ahmed Boughanmi <boughanmi.external@infineon.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7879
Reviewed-by: Karl Palsson <karlp@tweak.au>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This patch adds error reporting when unknown image type is specified.
Previously, OpenOCD replied with an empty string.
Change-Id: I16220b1f5deb3b966a21731f0adf7911a78e8959
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7883
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Add a new riscv specific commands to disable triggers
Change-Id: Ic1842085aa66851c740e0abcbfbe0adbe930920e
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
If it fails, then pass that failure on. If it's simply not implemented,
then we can fall through and try target_get_gdb_reg_list_noread().
This difference matters when the target representing the current
hwthread is unavailable, but the target that is linked to the gdb
connection is available. In that case we want the operation to return an
error to gdb, instead of reading the register from the target that is
available.
Change-Id: I9c84ca556f818c5580e25ab349a34a226fcf0f43
Signed-off-by: Tim Newsome <tim@sifive.com>
When gdb requests to step an unavailable target, report success. When
the target becomes available, the step can complete.
Change-Id: I969ab56139f72a757552928d59edf6eabd598fa4
Signed-off-by: Tim Newsome <tim@sifive.com>
Extend riscv set_ebreak* commands.
Now it can be called without args to print current value.
riscv_ebreak* flags are moved to riscv_info struct.
Change-Id: Ib46e6b6dfc0117599c7f6715c7aaf113e63bd7dc
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Previously, the bcm2835_peri_base value would be printed as a decimal
value despite having a "0x" prefix, implying it should be a hex value.
BCM2835 GPIO: peripheral_base = 0x1056964608
Now, the value is correctly converted to hexidecimal.
BCM2835 GPIO: peripheral_base = 0x3F000000
Change-Id: Id59185423917e6350f99ef68320e2102a3192291
Fixes: b41b368255 ("jtag/drivers/bcm2835gpio: extend peripheral_base to off_t")
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7888
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
and DP_SELECT_DPBANK.
Use the defined symbols instead of magic numbers.
Change-Id: I19c86b183e57e42b96f76eed180c0492cd67bee1
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7539
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
DP_SELECT_APSEL and DP_SELECT_APBANK is no more used in ADIv6.
Change-Id: I4176574d46c6dc8eb3fe3aef6daab6e33492c050
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7538
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
add refresh command for lattice devices
rename gowin reprogram to refresh
rename virtex2 program to refresh
Change-Id: I9da83a614b96da3e947ac4608b0a291b1d126914
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7839
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Provide jtagspi with specific procedures to be able to
use jtagspi for programming spi-flash devices on cologne
chip gatemate devices.
Change-Id: Ifa1c4ca6e215d7f49bd21620898991af213812e9
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7838
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Provide jtagspi with information to use jtagspi for
programming spi-flash devices on intel devices using
a proxy bitstream.
Change-Id: Ib947b8c0dd61e2c6fa8beeb30074606131b1480f
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7837
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Provide jtagspi with information to use jtagspi for
programming spi-flash devices on xilinx devices
using a proxy bitstream.
Change-Id: I68000d71de25118ed8a8603e544cff1dc69bd9ba
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7836
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Provide jtagspi with information to use jtagspi for
programming spi-flash devices on efinix trion and
titanium devices using a proxy bitstream.
Change-Id: I4a851fcaafe832c35bd7b825d95a3d08e4d57a7b
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7826
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Provide jtagspi with specific procedures to be able to
use jtagspi for programming spi-flash devices on lattice
certus and certus po devices.
Change-Id: I6a8ec16be78f86073a4ef5302f6241185b08e1c6
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7825
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Provide jtagspi with specific procedures to be able to
use jtagspi for programming spi-flash devices on lattice
ecp5 devices.
Change-Id: I4a4a60f21d7e8685a5b8320b9c6ebdc2693bbd21
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7824
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Provide jtagspi with specific procedures to be able to
use jtagspi for programming spi-flash devices on lattice
ecp2 and ecp3 devices.
Change-Id: I39028aba47a74a0479be16d52d318f4bff7f2ed4
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7823
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Jtagspi is using a proxy bitstream to "connect" JTAG to the
SPI pins. This is not possible with all FPGA vendors/families.
In this cases a dedicated procedure is needed to establish such
a connection.
This patch adds a jtagspi-mode for these cases. It also adds the
needed interfaces to jtagspi and the pld-driver so the driver
can select the mode and provide the necessary procedures.
For the cases where a proxy bitstream is needed, the pld driver
will select the mode and provide instruction code needed in this
case.
Change-Id: I9563f26739589157b39a3664a73d91152cd13f77
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7822
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
struct flash_bank must be zeroed anyway, calloc() is always used.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I7ab3b9c66f99688c6095a0a547a05448c9e37d68
Reviewed-on: https://review.openocd.org/c/openocd/+/7885
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
at91sam7 flash driver allocates a flash bank based on detected flash
structure.
Use calloc() instead of malloc() - struct flash_bank has to be zeroed.
While on this:
Return error in case of struct flash_bank or driver_priv allocation fail.
Set default_padded_value and erased_value.
Use strdup() on bank->name, pointer is freed in flash_free_all_banks()
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Id890496bfbadb7970ef583256aa4f30a7bff832f
Reviewed-on: https://review.openocd.org/c/openocd/+/7884
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
`riscv_debug_reg_to_s()` can be used to decode register value. If the
pointer to buffer is `NULL` it does not print anything, just returns the
length of the string.
The format is:
`<register_value> { <field_name>=<field_value_name or field_value>, ..., }`
e.g:
`0x400382 { version=2, ... ndmresetpending=false, }`
`0x321009 { regno=0x1009, ... cmdtype=0, }`
Change-Id: I63733d8d36385d89ca15de1a43139134bc488c4f
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
STM32WBA5x have a single bank flash up to 1MB
Change-Id: I3d720e202f0fdd89ecd8aa7224653ca5a7ae187b
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@st.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7694
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Recent commit 62f76b2169 ("flash/nor: add support for Nuvoton
NPCX4/K3 series flash") introduces a memory leak for a missing
free() on early return for an error.
Add the free() on the return path on error.
Change-Id: Ica8568a986802e23df2ab7bed4e8cc4bbb6305a5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 62f76b2169 ("flash/nor: add support for Nuvoton NPCX4/K3 series flash")
Reviewed-on: https://review.openocd.org/c/openocd/+/7894
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
For ARMv8, add AArch64 mdd and mwd support. AArch32 not supported.
Change-Id: I25490471e16943e5a67d7649595d77643aa9a095
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7192
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
According to gdb documentation, `g` and `p` packets can report a
register being unavailable by a string of 'x' instead of register's
value.
Change-Id: I8ef279f1357c2e612f5d3290eb0022c1b47d9fa7
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7876
Reviewed-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Anatoly Parshintsev <kupokupokupopo@gmail.com>
Tested-by: jenkins
When the target isn't halted, simply return an error. This used to be
purely internal code so an assert was appropriate. Now after some
refactoring and with unavailable harts you could get here when the hart
is unavailable. In that case the right thing is simply to return an
error message.
Change-Id: I49d26a11fe7565c645fd2480e89a2c35ea9b1688
Signed-off-by: Tim Newsome <tim@sifive.com>
Previously, if a pin was configured as ADAPTER_GPIO_INIT_STATE_INPUT and
its drive value was ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL, initialize_gpio
would configure the pin as an output.
The set_gpio_value function is optimized to not set the direction for
pins configured as ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL as it only needs to
be set once. When initialize_gpio performs this setup, it checked only
that the drive value was ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL to set the
output direction but did not exclude input pins which have already had
their direction set.
Now, input pins are ignored when initialize_gpio checks for
ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL to set the mode to output.
Fixes: ace028262b ("drivers/am335xgpio: Migrate to adapter gpio commands")
Change-Id: I9ea502c400ea4ffae37080b9cee891ca9176a47d
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7877
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Steve Marple <stevemarple@googlemail.com>
Previously, if the image file was less than 9 bytes long,
it was assumed to be an error when it could be a binary
image file. This patch makes OpenOCD detect these cases
as binary files.
Change-Id: I5b4dad2b547786246887812ac75907378fe58671
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7880
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Added NPCX flash driver to support the Nuvoton NPCX4/K3 series
microcontrollers. Add config file for these series.
Change-Id: I0b6e128fa51146b561f422e23a98260594b1f138
Signed-off-by: Luca Hung <YCHUNG0@nuvoton.com>
Signed-off-by: Mulin CHao <mlchao@nuvoton.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7794
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch unifies the lines printed by the "bp" command
so that different types of breakpoints are printed in
the same format.
Change-Id: Ic1335eda1c58072a334aed9cf0011431c8ec86a4
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7861
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Now internal watch/breakpoint will not be removed in case
of error during removing triggers from hardware.
Also change signature of some functions (for deletion
bp/wp) to print message in case of some error.
Change-Id: I71cd1f556a33975005d0ee372fc384fddfddc3bf
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7738
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Previously, an unknown semihosting operation number
was logged as debug. This patch changes it and few
other places to be logged as error instead.
Change-Id: I83cae5ca1e3daed440f92b08bd372bfffbbad63c
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
This patch disables software breakpoints of size 2 for targets
which don't support compressed instructions.
Change-Id: I8200b22a51c97ba2aa89e6328beadde8dd35cdd5
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Previously, if a pin was configured as ADAPTER_GPIO_INIT_STATE_INPUT and
its drive value was ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL, initialize_gpio
would configure the pin as an output.
The set_gpio_value function is optimized to not set the direction for
pins configured as ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL as it only needs to
be set once. When initialize_gpio performs this setup, it checked only
that the drive value was ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL to set the
output direction but did not exclude input pins which have already had
their direction set.
Now, input pins are ignored when initialize_gpio checks for
ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL to set the mode to output.
Change-Id: I4fc7a8132a6b00c7f213ec9fd05c7bbb37ee5f20
Fixes: 0dd969d83b ("drivers/bcm2835gpio: Migrate to adapter gpio commands")
Signed-off-by: Brandon Pupp <bpupp@xes-inc.com>
[vfazio: update commit message]
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7862
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
add new i2c bit-banging feature, we can now connect in JTAG with the SoC
target and in i2c with the main board components at the same time.
Change-Id: I8e4516fe1ad5238e0373444f1c3c9bc0814d0f52
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7796
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
add a line that checks the returned value of set signals function
add two VIDs of other original boards (have onboard angie architecture)
so angie driver can connect to them and change their VID after
renumeration.
Change-Id: Ide4f1f6f38168a410191bf3ff75bcd59dcf7ef50
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7795
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Introduce the ability to detect CPUs based on CP0 PRId register and
apply cpu specific quirks, which alter the default ejtag behavior.
First of those is EJTAG_QUIRK_PAD_DRET, which makes sure extra NOPs are
placed after the DRET instruction on exit from debug mode. This fixes
resume behavior on Ingenic JZ4780 SoC.
The proper detection of some (currently unsupported) CPUs becomes quite
complicated, so please consult the following Linux kernel code when
adding new CPUs:
* arch/mips/include/asm/cpu.h
* arch/mips/kernel/cpu-probe.c
Change-Id: I0f413d5096cd43ef346b02cea85024985b7face6
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7859
Tested-by: jenkins
stlink v2 on Nucleo-64 board (e.g. NUCLEO-L476RG) has target SWO signal
connected to STM32F103CB'S PA10, which is UART1_RX. UART1 within this
MCU in theory can be configured to 4.5 Mbps baudrate, which means this
is the upper limit supported by HW. As a confirmation BMP (Black Magic
Probe) project also states in documentation that UART1 can be used with
up to 4.5 Mbps baudrate.
Tests have shown that configuring 4.5 Mbps baudrate on stlink v2
available on NUCLEO-L476RG board results in receiving corrupted data.
Using 2.25 Mbps however allows to successfully receive all data from
SWO. This makes sense in terms of STM32F103CB capabilities, since 2.25
Mbps is the next supported baudrate due to division by 2.
Increase supported stlink v2 SWO speed from 2 to 2.25 Mbps.
Tested with NUCLEO-L476RG:
$ stm32l4x.tpiu configure -protocol uart \
-traceclk 80000000 -pin-freq 2250000 \
-output /dev/stdout
$ stm32l4x.tpiu enable
2.25 Mbps speed confirmed with logic analyzer.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Change-Id: Icbec04585664aba8b217e8f9a75458e577f7617f
Reviewed-on: https://review.openocd.org/c/openocd/+/7848
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This emulation mode supports software translation of an AP request
into an address mapped transaction that does not rely on physical AP
hardware. This is necessary in some hardware such as K3 SoCs since the
hardware architecture anticipates a potential race condition between
AP doing direct memory access generating transactions back to system
bus and firewalls that data path out.
This emulation mode allows direct memory driver to emulate CoreSight
Access Port (AP) and reuse the SoC configuration meant for JTAG
debuggers.
Since the address ranges are flat in nature, the requisite memory base
and size will need to be provided a-priori to the driver for mapping.
The other design alternative would be to map requested memory map for
every register operation, but, that would defeat our intent of getting
max debug performance.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jason Peck <jpeck@ti.com>
Change-Id: I2d3c5f7833f1973e90b4f6b247827f62fc2905d0
Reviewed-on: https://review.openocd.org/c/openocd/+/7089
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Direct memory driver support for CoreSight Access Port(AP).
Even though we emulate SWD (serial wire debug), we aren't actually
using swd. Instead, we are using a direct memory access to get to the
register set. This is similar in approach to other fast access native
drivers such as am335xgpio drivers.
Example operation on Texas Instrument's AM62x K3 SoC:
+-----------+
| OpenOCD | SoC mem map
| on |--------------+
| Cortex-A53| |
+-----------+ |
|
+-----------+ +-----v-----+
|Cortex-M4F |<───────| |
+-----------+ | |
| DebugSS |
+-----------+ | |
|Cortex-M4F |<───────| |
+-----------+ +-----------+
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jason Peck <jpeck@ti.com>
Change-Id: I8470cb15348863dd844b2c0e3f63a9063cb032c6
Reviewed-on: https://review.openocd.org/c/openocd/+/7088
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Since zephyrproject-rtos/zephyr@c3eeae8,
Zephyr OS exposes offset of mode_exc_return in the arch struct for ARM.
Accounting for this allows for consistency and enables
logic with further offsets that may be added after this.
Signed-off-by: Bruno Mendes <bd_mendes@outlook.com>
Change-Id: Id53ebd80c5d98a7d94eb6b00ad638ce51e719822
Reviewed-on: https://review.openocd.org/c/openocd/+/7851
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
These cores are advertised as M23 and M33 compatible, but are identified
by the Realtek implementor id. These cores are found on the RTL872xD
family, at least.
Raw CPUIDs:
Real-M200 (KM0): 721cd200
Real-M300 (KM4): 721fd220
Change-Id: I4106ccb7e8c562f98072a71e9e818f57999d664e
Signed-off-by: Karl Palsson <karlp@tweak.au>
Reviewed-on: https://review.openocd.org/c/openocd/+/7846
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Presently, we only look at the Part Number field of the CPUID, and
completely ignore the Implmentor field, simply assuming it to be ARM.
Parts have since been found, with different implementors, that use
overlapping part numbers, causing detection to fail.
Expand the "part number" field to be a full implementor+part number,
excluding the revision/patch fields, to make checking more reliable.
Change-Id: Id81774f829104f57a0c105320d0d2e479fa01522
Signed-off-by: Karl Palsson <karlp@tweak.au>
Reviewed-on: https://review.openocd.org/c/openocd/+/7845
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
There's really no reason to try and add an extra layer of cpu
verification here.
Change-Id: If8c4aa03754607be6c089f514ae300b09b067ffa
Signed-off-by: Karl Palsson <karlp@tweak.au>
Reviewed-on: https://review.openocd.org/c/openocd/+/7844
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
During a previous patch, the ignoring of writes to register zero
was deleted. This patch restores it to the original.
Change-Id: Ieb028a5b2e3f691e4847713c7bc809e10726e18c
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
This also fixes a bug when, after `examine` completion, the target still
has `unknown` status. To reproduce this one spike, it is enough to do
the following:
---
// make sure spike harts are halted
openocd ... -c init -c 'echo "[targets]"'
---
this behavior is quite dangerous and leads to segfaults in some cases
Change-Id: I13915f7038ad6d0251d56d2d519fbad9a2f13c18
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
This patch improves the following issues:
1. Makes it compatible with targets with progbufsize == 1.
2. Although exceptions don’t update any registers, but do end execution
of the progbuf. This will make fence rw, rw impossible to execute.
Change-Id: I2208fd31ec6a7dae6e61c5952f90901568caada6
Signed-off-by: Xiang W <wxjstz@126.com>
The motivation for this refactor is to fixup error handling for some
corner cases. These functions attempt to cache S0 register and only then
perform a bunch of extra checks to figure out if the requested register
is valid one in this context. The problem is that there are few corner
cases when _*progbuf functions could receive a GPR as an input. For
example, an abstract read could fail (for whatever reason) leading to
infinite recursion:
````
save S0 -> read S0 -> save S0 -> read S0 -> ...
```
The case described above could be fixed by adding extra sanitity checks,
however I decided to make these functions more modular since I find
self-contained functions easier to read.
Change-Id: I01f57bf474ca45ebb67a30cd4d8fdef21f307c7d
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
Use blocks (64 KiB) instead of sectors (4 KiB) when erasing the zd25Q16
SPI flash memory (thanks to Tomas Vanek!)
Change-Id: I969a69ad35f51b84eb3e11b93f0d79db3e98613a
Signed-off-by: Nikolay Dimitrov <nikolay.dimitrov@retrohub.org>
Reviewed-on: https://review.openocd.org/c/openocd/+/7850
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Add missing aarch64_poll() calls to ensure the event
TARGET_EVENT_HALTED is called when necessary.
This is needed with the poller update introduced in commit
95603fae18 ("openocd: revert workarounds for 'expr' syntax change")
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Change-Id: I6e91f1b6bc1f0d16e6f0eb76fc67d20111e3afd2
Reviewed-on: https://review.openocd.org/c/openocd/+/7737
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This is the driver code for NanoXplore's ANGIE USB-JTAG Adapter.
The driver is based on the openULINK project.
This driver communicate with ANGIE's firmware in order to establish
JTAG protocol to debug the target chip.
Since the ANGIE Adapter has a Spartan-6 FPGA in addition to the
FX2 microcontroller, the driver adds two functions, one to download
the firmware (embedded C) to the FX2, and the second to program
the FPGA with its bitstream.
Add ANGIE's configuration file to tcl/interface/
Add the device VID/PID to 60-openocd.rules file.
Add ANGIE to OpenOCD's documentation
Change-Id: Id17111c74073da01450d43d466e11b0cc086691f
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7702
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The USB control transfer can be executed without any data.
The libusb API libusb_control_transfer() can thus be called with
zero 'size', thus returning zero byte transferred when succeed.
The OpenOCD API jtag_libusb_control_transfer() returns zero either
in case of transfer error and in case of libusb_control_transfer()
returning zero, making impossible discriminating the two cases.
Extend jtag_libusb_control_transfer() with separate return value
for error code and explicit parameter's pointer for transferred
bytes.
Make the transferred pointer optional, as many callers do not
properly handle the returned value.
Use 'int' type pointer for transferred, instead of the 'uint16_t'
that would have matched the type of 'size'. This can simplify the
caller's code by using a single 'int transferred' variable shared
with other jtag_libusb_bulk_read|write, while keeping possible the
comparison int vs uint16_t without cast.
This change is inspired from commit d612baacaa
("jtag_libusb_bulk_read|write: return error code instead of size")
Change-Id: I14d9bff3e845675be03465c307a136e69eebc317
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7756
Tested-by: jenkins
Reviewed-by: ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
This patch changes data types of watchpoint value and mask to allow for
64-bit values match that some architectures (like RISCV) allow.
In addition this patch fixes the behavior of watchpoint command to
zero-out mask if only data value is provided.
Change-Id: I3c7ec1630f03ea9534ec34c0ebe99e08ea56e7f0
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7840
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Marek Vrbka <marek.vrbka@codasip.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
register_cache_invalidate() is written a way which uses
pointer arithmetic, which makes it harder to read. This patch
replaces it with more readable way to iterate over array of
structs.
Change-Id: Ia420f70a3bb6998c690c8c600c71301dca9f9dbf
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7735
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
OpenOCD fails in the presence of inactive/unresponsive cores
I faced with case when inactive core returns 0 while reading dtmcontrol.
This leads to failure on assert: "addrbits != 0" in "dbus_scan".
Also change "read_bits","poll_target" funcs to avoid a lot lines in logs
Change-Id: If852126755317789602b7372c5c5732183fff6c5
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Lot of messages was logged as LOG_WARNING, but the operation failed
immediately. Sometimes no error message was logged at all.
Add missing messages, change warnings to errors.
Sometimes ERROR_TARGET_INVALID was returned. Some command handlers
returned ERROR_OK! Always return ERROR_TARGET_NOT_HALTED.
While on it use LOG_TARGET_ERROR() whenever possible.
Prefix command_print() message with 'Error:' to get closer
to LOG_TARGET_ERROR() variant.
Error message was not added to get() and set() methods of
struct xxx_reg_type - the return value is properly checked and a message
is logged by the caller in case of ERROR_TARGET_NOT_HALTED.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I2fe4187c6025f0038956ab387edbf3f461c69398
Reviewed-on: https://review.openocd.org/c/openocd/+/7819
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Support assign DMI address of the debug module by pass
-dbgbase to the target create command
Change-Id: I774c3746567f6e6d77c43a62dea5e9e67bb25770
Signed-off-by: Mark Zhuang <mark.zhuang@spacemit.com>
Compiler would complain that `written` was used without being
initialized.
Simplify the code a little. The number of bytes written is already
checked in usb_write().
Signed-off-by: Tim Newsome <tim@sifive.com>
Change-Id: Ibada85dcccfca6f1269c584cdbc4f2e3b93bb8f3
Reviewed-on: https://review.openocd.org/c/openocd/+/7813
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
This patch adds target logging to logging instances where it makes sense.
This is especially useful when debugging multiple targets at once,
such as multicore systems.
Change-Id: Ia9861f3fa0e6e5908b683c2a8280659c3c264395
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
While not affecting the function's main purpose, an error has
crept into arc_save_context() that results in logging wrong register
values when the debug level is 3 or more. For instance, when debugging a
trivial program and halting at entry to main, the following values are
printed to the log:
Debug: 2915 2020 arc.c:894 arc_save_context(): Get core register regnum=0,
name=r0, value=0x0000000
...
Debug: 2947 2020 arc.c:894 arc_save_context(): Get core register regnum=60,
name=lp_count, value=0x900002d8
Debug: 2948 2020 arc.c:894 arc_save_context(): Get core register regnum=63,
name=pcl, value=0xffffffff
Debug: 2949 2020 arc.c:909 arc_save_context(): Get aux register regnum=64,
name=pc, value=0x900000b4
Debug: 2950 2020 arc.c:909 arc_save_context(): Get aux register regnum=65,
name=lp_start, value=0x900000bc
Debug: 2951 2020 arc.c:909 arc_save_context(): Get aux register regnum=66,
name=lp_end, value=0x00080801
Debug: 2952 2020 arc.c:909 arc_save_context(): Get aux register regnum=67,
name=status32, value=0xffffffff
After the change, the register contents make much more sense:
Debug: 2923 3934 arc.c:889 arc_save_context(): Get core register regnum=0,
name=r0, value=0x00000000
...
Debug: 2955 3934 arc.c:889 arc_save_context(): Get core register regnum=60,
name=lp_count, value=0x00000000
Debug: 2956 3934 arc.c:889 arc_save_context(): Get core register regnum=63,
name=pcl, value=0x900002d8
Debug: 2957 3934 arc.c:903 arc_save_context(): Get aux register regnum=64,
name=pc, value=0x900002da
Debug: 2958 3934 arc.c:903 arc_save_context(): Get aux register regnum=65,
name=lp_start, value=0x900000b4
Debug: 2959 3934 arc.c:903 arc_save_context(): Get aux register regnum=66,
name=lp_end, value=0x900000bc
Debug: 2960 3934 arc.c:903 arc_save_context(): Get aux register regnum=67,
name=status32, value=0x00080801
While at it, simplify a couple of expressions.
Change-Id: I8f2d79404707fbac4503af45b393ea73f91e6beb
Signed-off-by: Artemiy Volkov <artemiy@synopsys.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7765
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Besides checkpatch, now upstream codes are scanning with
Sparse semantic checker tool.
This commit addresses some Sparse and checkpatch warnings.
Change-Id: I0e3e9f15220d8829c5708897af27aa86a8f90c07
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Below warnings are fixed.
1- A function declaration without a prototype is deprecated in all
versions of C [-Werror,-Wstrict-prototypes]
2- error: variable set but not used [-Werror,-Wunused-but-set-variable]
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I1cf14b8e5e3e732ebc9cacc4b1cb9009276a8ea9
Reviewed-on: https://review.openocd.org/c/openocd/+/7569
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
* Add a warning when eq trigger is setup and it's behavior is different
from other triggers.
* Make eq trigger's behavior consistent with other triggers in case of
length == 1.
* Fix a bug in setting chained triggers (LT, GT case).
* Improve logging.
Change-Id: Id1ed0d11971b8ed875afbb979e6c8a8b51dd3818
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
There were a couple of problems with previous implementation:
* Misalligned read would return ERROR_OK and print all zeroes.
* CMDERR_BUSY for abstract access was improperly handled:
According to the spec, no assumptions can be made about DM_DATA*
contents in such a case, but these were considered valid values from
memory.
* A fallback to one element read was implemented when DMI_STATUS_BUSY
occurred during batch reads, even though this can be accounted for.
Change-Id: I09174c61c951b2bb97a529b7f0aa5afaa995179b
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Memory region addresses are not in use for now.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I9a2189e956ae59b56245ec914ab16719df857b2d
Reviewed-on: https://review.openocd.org/c/openocd/+/7762
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Right after target halt, some activities needs to be done
such as printing exception reason, disable wdts and reading
debug stubs information.
Missing activities will be submitted in the next patches.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I27aad5614d903f4bd7c8d6dba6bfb0bdb93ed8dc
Reviewed-on: https://review.openocd.org/c/openocd/+/7757
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
See section 57.6.1 in RM0432.
Change-Id: Ic4977aee74d1838f420c1d9ff19925d09f8f6e2b
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7763
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
1. update RISCV_MAX_HARTS to 2^20 according to SPEC
2. remove RISCV_MAX_REGISTERS, it's not used anywhere anymore
3. add parentheses
Change-Id: Iadf0fa1ba3bbe5b9420b8430883e140db87f4f9e
Signed-off-by: Mark Zhuang <mark.zhuang@spacemit.com>
If a target where a software breakpoint was set is not currently
available, but there are other targets in the same SMP group that are
available, then we can use those to remove the software breakpoint.
Change-Id: I9faa427c7b3aee31504e6e6599539e6f29b58d8f
Signed-off-by: Tim Newsome <tim@sifive.com>
STLINK-V3PWR is both a standalone debugger probe compatible with
STLINK-V3 and a source measurement unit (SMU).
Link: http://www.st.com/stlink-v3pwr
This code adds support for the debugger probe functionality.
Change-Id: Ib056e55722528f922c5574bb6fbf77e2f2b2b0c1
Signed-off-by: Laurent LEMELE <laurent.lemele@st.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7755
Tested-by: jenkins
To start a ipdbg server one needs to know the tap and the
instruction code to reach the IPDBG-Hub. This instruction is
vendor/family specific. Knowledge which can be provided by the
pld driver.
Change-Id: I13eeb9fee895d65cd48544da4704fcc9b528b869
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7369
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
According to section 5.6 in the RISC-V debug specification, the previous
way to set triggers was incorrect, as was discussed as part of
https://github.com/riscv/riscv-openocd/issues/870. This commit fixes the
sequence to be in line with the specification as well as adds some comments
to clarify for any future reader as to what is actually done.
Change-Id: Iffc5cc0f866a466a7aaa72a4c53ee95c9080ac9d
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
this functionality allows to query if a target belongs to some smp group
and to dynamically turn on/off smp-specific behavior
Change-Id: I469453d95e7c1640a91bc60d80c854404e508535
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
This patch fixes the handling of errno by setting the sys_errn
only if error has actually occurred during the semihosting call.
It also fixes few issues where error was not set in the first place.
Change-Id: I2fbe562f3ec5e6220b800de04cd33aa1f409c7a0
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7730
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
This patch introduces function semihosting_opcode_to_str() which
converts semihosting opcodes to strings. This function is then
used in debug messages to improve log analysis and troubleshooting.
Change-Id: Iffea49dae13d6a626ae0db40d379cba3c9ea5bd3
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7726
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
* rtos/FreeRTOS: solve some conflicting usage of thread id.
1.
There are some RISCV-specific usage of thread_id, which has conflict with upstream.
Some adaptions are made in this patch, to make sure OpenOCD is sending a clear thread list to gdb.
2.
Use freertos_read_struct_value for xSchedulerRunning.
Change-Id: I001a88a0c6d8eac98a389c0217b4897f28124840
Signed-off-by: Chao Du <duchao@eswincomputing.com>
* fix typo.
Change-Id: Id6546cc74de44bbee7e44b7cb29b769a2f35ec4a
* correct the data type.
Change-Id: I28c7e111e569d94ba5f6e1ae21745ddb34d4dd12
* changes as per the review comment.
Change-Id: Ica4c705a8f2657700dc27e24790287ca802480fd
* another macro replacement.
Change-Id: Ia9330fed32d917cf87804051ba1b8d6ac42cfb7b
---------
Signed-off-by: Chao Du <duchao@eswincomputing.com>
With this change, failures to resume a hart due to it not being halted
are more explicitly logged or reported as an error.
Change-Id: Ia55d8df85a908363d0f2140637ce1e47c1ab6251
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This involves halting the target, which might have unintended side
effects, but when the debugger is connected software breakpoints must
trap to the debugger. Anything else is a terrible user experience.
Change-Id: I1f7bb610eeeb054cc3042dc6bcfc16589ce12a31
Signed-off-by: Tim Newsome <tim@sifive.com>
Intended as a place where we can interact with the target without too
much concern about preserving state and doing exactly the right thing
while poll() is going on.
Change-Id: Ic9bd441caae85901a131fd45e742599803df89b5
Signed-off-by: Tim Newsome <tim@sifive.com>
Specifically, call into the RISC-V version when target becomes halted,
running, or unavailable.
I'll be using unavailable shortly.
Change-Id: I9ffffdccbf22e053fe6390d656b362bf9ab9559a
Signed-off-by: Tim Newsome <tim@sifive.com>
Will be used later when we want to do a quick halt/resume.
Change-Id: Ib80166234c4c277b7d9ce26b7566ac0f93017e64
Signed-off-by: Tim Newsome <tim@sifive.com>
* Only set ebreak bits that might be supported based on misa.
* Don't write dcsr if its value wouldn't change.
Change-Id: I7087af0b0df0fbdbf994373b5c887b9b389df872
Signed-off-by: Tim Newsome <tim@sifive.com>
Make it callable earlier, handle `supported` being NULL, and make enum
names more clear.
Change-Id: If4d286b54ccfc01eb5de5a57eb18f748c920e979
Signed-off-by: Tim Newsome <tim@sifive.com>
The riscv013_on_halt function was being called but its implementation was
empty, providing no additional functionality. Removed the function declaration,
calls to it, and its implementation since it is not required.
Change-Id: I425ea890deadeec945f0a47af247f3f99172e801
Signed-off-by: Tim Newsome <tim@sifive.com>
Otherwise I get a compiler warning, which fails the build.
Change-Id: Ib7d4ab85160b537d07c74f8651ac42906fd661ed
Signed-off-by: Tim Newsome <tim@sifive.com>
When halted we don't need to read all 3 instructions before deciding the
sequence doesn't match.
Change-Id: I9f8345960ce27e859265af901a368166a70b9fde
Signed-off-by: Tim Newsome <tim@sifive.com>
* rtos/FreeRTOS: pxCurrentTCB should be used for judgment.
The current TCB is stored in pxCurrentTCB, which is somehow RISC-V-specific, should not be overwritten from upstream (#816).
* fix the code style check.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Change-Id: I9ffa8947f0cb9e93c7d96866882a5a1e8e69afad
* revert some over-changes in last commit.
Change-Id: Ie88bd75b59190503db11ee4538281bd13b554e50
Signed-off-by: Chao Du <duchao@eswincomputing.com>
---------
Signed-off-by: Chao Du <duchao@eswincomputing.com>
The original document from Jedec does not report the entry for
"21 NXP (Philips)", replaced by "c". It's clearly a typo.
Keep the line from JEP106BF.01 for "NXP (Philips)".
Change-Id: I30215c4ff08d5f112305cde6ab7a3176cdcef948
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7727
Tested-by: jenkins
On Windows, isatty() can return any non-zero value if it's an interactive
device. Which diverges from the ARM semihosting specification. This patch
introduces a fix to make the SYS_ISTTY operation conform to spec.
Change-Id: I9bc4f3cb82370812825d52419851910b3e3f35cc
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7725
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
The old implementation of gdb socket error handling
in the gdb_get_char_inner() differs between Windows and *nix
platforms. This patch simplifies it by using an existing
function log_socket_error() which handles most of the platform
specific things. It also provides better error messages.
Change-Id: Iec871c4965b116dc7cfb03c3565bab66c8b41958
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7724
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Added debug prints to show what is the target debug reason. Also added
debug print for Ctrl-C response. This is useful for troubleshooting and
log analysis.
Change-Id: I055936257d989efe7255656198a8d73a367fcd15
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7720
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
This patch adds support for the NXP QN908x family of Bluetooth
microcontrollers, such as the QN9080. This chip features a Cortex-M4F
with 512 KiB of flash on all the available versions, although the
documentation suggests that there might be 256 kB versions as well.
The initial support allows to read, erase and write the whole user flash
area. Three new sub-commands under the new "qn908x" command are added
in this patch as well: disable_wdog to disabled the watchdog,
mass_erase to perform a mass erase and allow_brick to allow programming
images that disable the SWD interface.
Disabling the watchdog is required after a "reset halt" in order to run
the CRC algorithm from RAM when verifying the chip. However, this is not
done automatically on probing or other initialization since disabling
the watchdog might interfere with debugging real applications.
The "mass_erase" command allows to erase the whole flash without
probing it, since in some scenarios the chip can be locked such that no
flash or ram can be accessed from the SWD interface, allowing only to
run a mass_erase to be able to flash the program.
The flashing process allows to compute a checksum, similar to the
lpc2000 driver "calc_checksum" but done over a different region of the
memory. This checksum is required to be present for the QN908x
bootloader ROM to boot, and otherwise is useless. As with the lpc2000
design, verification when using "calc_checksum" is expected to fail if
the checksum was not valid in the image being verified.
This was manually tested on a QN9080, including the scan-view,
AddressSanitizer/UBSan and test coverage configurations.
Change-Id: Ibd6d8f3608654294795085fcaaffb448b77cc58b
Co-developed-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Signed-off-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Signed-off-by: iosabi <iosabi@protonmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/5584
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
These functions used to exist but don't anymore. (Pointed out in #863)
Change-Id: Iac6b5edd320bdff7628a788861e332f956dcd93d
Signed-off-by: Tim Newsome <tim@sifive.com>
Previously, progbuf execution did not flush or invalidate the register cache which could lead to incorrect behavior. This patch fixes it as well as refactors few sore points in the code related to it.
Change-Id: I353b931ca70a1828d4a9cc512aead00441730875
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Otherwise we may end up modifying DCSR of a different hart than
intended.
Change-Id: I39bde21a1444623ed150f2b3d504b9318b9d6191
Signed-off-by: Tim Newsome <tim@sifive.com>
This change implements the predefined type tap_state instead of generic
uint8_t in the driver
Change-Id: I3478e8d7b40b961f3ba77711179016cdcc35cd32
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7722
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
This change fixes endianness support in the driver.
Change-Id: Ida360bb58e988cea0a66fdc79e1610b528846fc4
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7721
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Clang reports that 3rd function call argument is an uninitialized value
file esp32_apptrace.c line:1270
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I73e254d4eb0c6b3152229717d8827d334784ab92
Reviewed-on: https://review.openocd.org/c/openocd/+/7719
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Clang is unable to fully track the content of the array
write_buffer[] and incorrectly complains that it could contain
some uninitialized value.
To help clang to track the execution flow, rewrite the handling of
the buffer by using simpler indexing and by moving away cmd_byte
from the first buffer's element to the variable cmd_byte.
While there:
- fix the error codes returned while parsing the command line and
- use directly command_print_sameline() instead of passing through
intermediate buffers.
Change-Id: I1969e896887ea3a4abebee057cc04c03005fa57c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7718
Tested-by: jenkins
Clang 15.0.7 complains about snprintf output truncation due to
output between 13 and 22 bytes into a destination of size 20.
Increase the size of the buffer.
Change-Id: I0369255ca1bc02a0cf494f765e91a608c960a0d6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7717
Tested-by: jenkins
Value in the 'dscsr' variable is garbage until the DAP queue is run.
Postpone evaluation of the 'secure_state' variable. Reading the
core registers in between will execute the DAP queue.
Change-Id: I44959e882dbafb1b9779e813c3d13f3b3dbcd47f
Signed-off-by: Bohdan Tymkiv <bohdan200@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7693
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The registers pauth_dmask and pauth_cmask are not accessible in
AARCH32 mode. Tagging them as 'hidden' is not enough and triggers
error:
Failed to read pauth_dmask register
while halting the core.
Tag the pauth registers as not existing, unless required by user.
Note: for non existing registers there should be no need to
allocate their register cache. Let's keep this for a further
improvement.
Change-Id: Iaa0d006a3d8ee611ee93333ed49a8615a6c94276
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: d0436b0cda ("armv8: Add support of pointer authentication")
Reviewed-on: https://review.openocd.org/c/openocd/+/7712
Tested-by: jenkins
Reviewed-by: Koudai Iwahori <koudai@google.com>
Register access on running target should fail if mstatus needs to be
modified.
Change-Id: Iec8e8d514ef2f5ca42606a5534cce55aaaa99180
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
- Manual integration of File-IO support from xt0.2 release
- Verified with applications linked using gdbio LSP
- No new clang static analysis warnings
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: Iedc5f885b2548097ef4f11ae1a675b5944f5fdf0
Reviewed-on: https://review.openocd.org/c/openocd/+/7550
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Removed an unused include from src/jtag/adapter.c.
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Change-Id: Ia5ea0acdfa1c011d7c88decd0f63e8032aafd699
Reviewed-on: https://review.openocd.org/c/openocd/+/7687
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The function is used for commands:
- jtag tapisenabled
- jtag tapenable
- jtag tapdisable
While there, add the missing .help and .usage fields and fix the
incorrect check in jtag_tap_enable() and jtag_tap_disable().
Change-Id: I0e1c9f0b8d9fbad19d09610a97498bec8003c27e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7554
Tested-by: jenkins
While there:
- fix memory leak in case of error on values tap->chip,
tap->tapname, tap->expected_ids;
- check for out of memory error;
- fix minor coding style issue;
- add the missing .usage field;
- remove functions not in use anymore.
Change-Id: I1c8c3ffeb324e9eacb919c7e0d94fd72122c9a81
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7431
Tested-by: jenkins
Change the prototype of functions:
- target_run_algorithm()
- target_wait_algorithm()
- target_wait_state()
- struct target_type::run_algorithm()
- struct target_type::wait_algorithm()
to use unsigned int for timeout_ms instead of int.
Change accordingly the variables passed as parameter.
Change-Id: I0b8d6e691bb3c749eeb2911dc5a86c38cc0cb65d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7562
Tested-by: jenkins
While there, add the missing .usage field and remove the now
unused function jim_target_tap_disabled().
Change-Id: I79afcc5097643fc264354c6c3957786a55f40498
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7561
Tested-by: jenkins
The function esp32_cmd_apptrace_generic() is not used outside the
file.
Declare it as static.
Detected through 'sparse' tool.
Change-Id: I08c6b92fb01594320bc3ae6b16067ac4eb51ca12
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7676
Tested-by: jenkins
This reverts commit 047b1a8fc2.
Commit 047b1a8fc2 ("target/image: zero-initialize ELF segments
up to p_memsz") breaks the backward compatibility introducing some
problem:
- an empty bss segment with paddr in SRAM gets zero filled at load
but does not survive after a reset, causing verify to fail;
- an empty bss segment with paddr in FLASH causes excessive flash
usage, which can exceed flash size (causing error) and makes
flash aging faster.
Revert it while looking for a better implementation.
Change-Id: Iaaf926dafce46a220a5bbe20c8576eb449996d76
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7658
Reviewed-by: Bohdan Tymkiv <bohdan200@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-by: Peter Collingbourne <pcc@google.com>
Tested-by: jenkins
This way if you connect to a running target, before it's hit a breakpoint,
then when it does hit the breakpoint OpenOCD will catch it.
Change-Id: I6f1e5f169fa385f46759015786e664693c3872e4
Signed-off-by: Tim Newsome <tim@sifive.com>
Poll failure just means poll failed. It's safer to assume the target is
still running, because then if it is running and subsequently halts we can
relay this to gdb correctly. We can't do the other way around, because once
gdb thinks the target has halted, it can't deal with it spontaneously
running.
Change-Id: Idb56137f1d6baa9afc1b0e55e4a48f407b8ebe83
Signed-off-by: Tim Newsome <tim@sifive.com>
When a DM was powered down, we end up in examine() again, and clearly if
the DM was powered down we need to invalidate that cache.
Change-Id: I5eb6a289939f313e06c09cac22245db083026aa3
Signed-off-by: Tim Newsome <tim@sifive.com>
The error state is sticky, so this has to be done to recover.
Change-Id: I589f3cdab0f2351fd25f89951830cbc16c39bd93
Signed-off-by: Tim Newsome <tim@sifive.com>
Trying to disable OTP write protection by running e.g. `flash protect
1 0 1 off` would already be rejected with an error code, but that would
result in a generic "failed setting protection for blocks 0 to 1"
message. Now a more specific error message is also printed, telling the
user why it failed.
Change-Id: I6d4974eb0bcd23a0a6cf68ff955d9e59b8b1b06a
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Reviewed-on: https://review.openocd.org/c/openocd/+/7615
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
When a DMI operation does not succeed (either because of a timeout
or an error), the specification says that the error in the `op`
field is sticky and needs to cleared by writing `dmireset` in `dtmcs`.
This is already done for timeouts in increase_dmi_busy_delay
but not for errors.
Change-Id: I7c5f27a5cf145511a1a8b64a45a586521e1cbe41
Signed-off-by: Amaury Pouly <amaury.pouly@lowrisc.org>
Reviewed-on: https://review.openocd.org/c/openocd/+/7688
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
this new STM32 series family introduces 2 devices:
STM32C011xx (0x443) and STM32C031xx (0x453)
both devices have 32 Kbytes single flash bank.
Change-Id: I4e890789e44e3b174c0e9c0e1068383ecdbb865f
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6874
Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The bcm2835gpio driver preferred /dev/gpiomem for access to
memory mapped GPIO control and used /dev/mem as a fallback
only if it couldn't open /dev/gpiomem.
/dev/mem usually requires elevated rights or specific capabilities
of the opening process, so the fallback failed anyway.
Although /dev/gpiomem is the strongly preferred option with respect
to security, there could be also use cases which require /dev/mem
even if /dev/gpiomem is available (e.g. changing the GPIO pad
settings is necessary or testing/debugging OpenOCD).
It was difficult to handle such cases because they required
to block globally the system device /dev/gpiomem
(remove, rename or chmod).
Drop the fallback feature and select the memory device
by 'bcm2835gpio peripheral_mem_dev' configuration command.
Use /dev/gpiomem as a default.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I60e427bda795d7a13d55d61443590dd31d694832
Reviewed-on: https://review.openocd.org/c/openocd/+/7350
Tested-by: jenkins
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Raspberry Pi 4 with 64-bit kernel and arm_peri_high=1 config.txt
parameter needs peripheral_base 0x47e000000, uint32_t is not enough.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Icedd084e2916657fa4478d452a5eb1e84a45c281
Reviewed-on: https://review.openocd.org/c/openocd/+/7685
Tested-by: jenkins
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The pads were configured at a wrong memory address
if /dev/gpiomem was mapped.
The pad setting registers are not accessible in mapped /dev/gpiomem,
disable the pads setting if the driver doesn't open /dev/mem.
While on it, do not fail the driver initialization if pad mapping fails
- just emit a warning and work with unchanged pad setting.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I0bce76cade8f7efd75efd9087a7d9ba6511a6239
Reviewed-on: https://review.openocd.org/c/openocd/+/7684
Tested-by: jenkins
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit introduces a new function, which can be used to reduce number
of register accesses.
Change-Id: I125809726eb7797b11121175c3ad66bedb66dd0d
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Since writing a register can make some GPRs dirty (e.g. S0, S1), registers
should be flushed in reverse order, so GPRs are flushed last.
Change-Id: Ice352a4df4ae064619c0f9905db634a7b57e4711
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Commit dd9137dc0e ("pld/virtex2: add missing error checks") adds
checks on the return value of several functions, allowing also
virtex2_read_stat() to propagate such returned values.
This triggers an error with clang, as it is now able to identify a
possible execution path that makes uninitialized the variable
status.
Check for the returned value of virtex2_read_stat() before using
the variable status and propagate the returned value.
While there, drop a useless empty string.
Change-Id: I7a23d3f904d4e07cdb6f6dfdf1179889b6b8afb8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7657
Reviewed-by: Daniel Anselmi <danselmi@gmx.ch>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The static analyser 'sparse' complains about using sizeof() on a
struct that has variable size:
src/rtos/uCOS-III.c:267:32: warning: using sizeof on a flexible structure
src/rtos/uCOS-III.c:269:41: warning: using sizeof on a flexible structure
src/rtos/uCOS-III.c:275:66: warning: using sizeof on a flexible structure
The struct ucos_iii_params contains either constants values for
different target type and variable fields. The last field is an
variable size array, always allocated to UCOS_III_MAX_THREADS
items. It's not practical to fix this size because we would get
too huge initialization in data segment.
Split away from struct ucos_iii_params all the variable fields and
put them in struct ucos_iii_private. Add in the new struct a
pointer to the selected element of ucos_iii_params_list[] and fix
the size of array threads[] to its maximum value; this would be
allocated at run-time, avoiding impacts to data segment.
Change-Id: I569011a257783d35a8795adbda06e942b4157f2a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7678
Tested-by: jenkins
The function rtos_thread_packet() is used across rtos and declared
locally as extern.
Move the prototype of the function in common include rtos.h
Change-Id: I50d311b583148a2de628de0997ef1afc9103a70e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7677
Tested-by: jenkins
The struct containing SWD and JTAG operations are declared as
extern in the C file.
Mode them in include file arm_adi_v5.h to silent 'sparse' error
for global variable definition without declaration in an include
file.
Change-Id: I59088512c052d5a120c38404a882ed512a68ca02
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7675
Tested-by: jenkins
The pointer nand_devices is used in two file.
Move the extern prototype in code.h
Detected through 'sparse' tool.
Change-Id: I7237359fd1a008770a624725cd0b3d8632b4166e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7674
Tested-by: jenkins
The internal variable 'gdb_actual_connections' is used by log and
by semihosting to determine if there are active GDB connections.
Keep the variable local in server's code and only export its value
through a dedicated function.
This solves the issue detected by 'parse' of the variable defined
as global but not declared in any include file.
Change-Id: I6e14f4cb1097787404094636f8a2a291340222dd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7673
Tested-by: jenkins
The function jtag_debug_state_machine_() is only used by a static
inline function and declared inside it as private.
The static analyser 'sparse' complains that the function is
defined as global but not cross checked against a prototype in an
include file.
Move the declaration outside the inline function so it get visible
by interface.c, which already includes interface.h
While there, change the argument type from 'unsigned' to 'unsigned
int' to pass checkpatch check.
Change-Id: Ia5dfb92dc4bc6d52ead4f0cb8c68319c83ff85b0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7672
Tested-by: jenkins
Let source file to include its file .h to validate the exported
prototypes.
Detected through 'sparse' tool.
Change-Id: I6197f21c857833dafc3d6e3b750c764bf4610abd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7671
Tested-by: jenkins
The static analyser 'sparse' complains about values bigger that
255 that gets cast-ed and/or stored in an 8 bit variable.
Rework the functions:
- h_u32_to_le()
- h_u32_to_be()
- h_u24_to_le()
- h_u24_to_be()
- h_u16_to_le()
- h_u16_to_be()
to avoid all the related warnings, without adding any functional
change. Any modern compiler should not be impacted by this.
Change-Id: I0b84043600a41c72d0e4ddb3dd195d69e3b2896b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7670
Tested-by: jenkins
The new committed files add some warning from the static analyser
'sparse':
- Don't assign pointer to 0, use NULL.
- switch with no cases.
Fix them.
Change-Id: I2c02d629bd80b71c8e42553be5d9388bb9b6bcd0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7668
Tested-by: jenkins
The static analyser 'sparse' complains that the functions
clear_malloc() and fill_malloc() are defined global but not cross
checked against a prototype in an include file.
Rework replacements.h and replacements.c to let the former be
included by the latter.
Change-Id: I536393a9c3718dcd7e144cde8f02e169f64c88e0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7667
Tested-by: jenkins
Don't use 'extern' in a C file, but declare the exported function
in a H file.
This helps validating the function prototype across declaration
and use.
Detected through 'sparse' tool.
Change-Id: I2c22b084fb513f4b3b1b1db96dfbc8fa4bfe7238
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7666
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a jtag
driver, that the struct adapter_driver is declared in the file as
non static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of adapter_driver's declaration in interface.h
Drop the preprocessor #ifdef/#endif around the declaration, as it
has no effect when the declaration is not used and/or the symbol
does not exist.
Change-Id: I5b8f5fe48a89ff0ffce38d547c551cd196379fbf
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7665
Tested-by: jenkins
Let source files to include its file .h to validate the exported
prototypes.
Detected through 'sparse' tool.
Change-Id: I217c2903fdb19e1a2cce39d2536a903c3d72f3f7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7664
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a pld
driver, that the struct pld_driver is declared in the file as
non static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of pld_driver's declaration in pld.h
Change-Id: I0f917aecc7534c1b51af0afa9b32ccfd33db3511
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7663
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a nor
driver, that the struct flash_driver is declared in the file as
non static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of flash_driver's declaration in driver.h
Fix some incorrect non-const declaration and remove redundant
forward declarations.
Change-Id: I5e41d094307aac4a57dfa9a70496ff3cf180bd92
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7662
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a nand
driver, that the struct nand_flash_controller is declared in the
file as non static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of nand_flash_controller's declaration in driver.h
While there, drop the unused/commented boundary scan controller.
Change-Id: I7dc32cef55be13ba537abe0f4c47b135d837126c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7661
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a rtos'
file, that the struct rtos_type is declared in the file as non
static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of rtos_type's declaration in rtos.h
Change-Id: Ia96dff077407a6653b11920519c1724e4c1167a3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7660
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a target's
file, that the struct target_type is declared in the file as non
static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of target_type's declaration in target_type.h
While there, fix a name clash in stm8.c
Change-Id: Ia9c681e0825cfd04d509616dbc04a0cf4944f379
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7659
Tested-by: jenkins
In case in the future I have the same idea of optimizing progbuf writes
again.
Change-Id: Ie383487691cceeff75e2c22f4c85fc1fe4873937
Signed-off-by: Tim Newsome <tim@sifive.com>
Small cleanup in target.c to get rid of few upstream differences:
- removed a pointless check for `reg->exists` - already checked
few lines above
- unify one log message with what's in upstream
Change-Id: I3fd761157382670611fa90de84e2dfc90192f473
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Non-functional change: unused function removed that does not exist
in the OpenOCD upstream, either.
Change-Id: Ibeab5b41a24183673cc02ca919b2f7285309e6f4
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
To perform any meaningful manipulations with DR the corresponding IR should
be set to a relevant instruction, not BYPASS, so warn the user accordingly.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Change-Id: I42580ecd75ae824a4145f6f17f0df9bcf825b50f
Reviewed-on: https://review.openocd.org/c/openocd/+/7654
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
It's customary to use [] brackets to mean the argument is optional, but
drscan requires at least one pair of "num_bits value" so change it to ().
In common regular expressions * means 0 or more, and + means 1 or more,
so change that too.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Change-Id: Ib15d833bda2aa398ad1345a042f97d91c98dbf66
Reviewed-on: https://review.openocd.org/c/openocd/+/7653
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
While there, add the missing .usage field and move in target.c the
enum nvp_assert.
Change-Id: Ia4f2f962887b5a35faeaa4eae128fa2865569b24
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7559
Tested-by: jenkins
Reorganize the code to parse the command line only once.
Add check for successful memory allocation.
Change-Id: Ibf6068e177c09e93150d11aecfcf079348c47c21
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7555
Tested-by: jenkins
For some trivial case only, replace calls to jim-nvp with calls
to the new OpenOCD nvp.
Change-Id: Ifd9aff32b67748af8ab808e6a6b6e64f5271b888
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7553
Tested-by: jenkins
New gcc does not understand that the variable 'restore_ms' is set
to 'true' only when the variable 'ms' is assigned in
static int xtensa_write_dirty_registers(...)
{
xtensa_reg_val_t ms;
bool restore_ms = false;
...
if (...) {
ms = regval;
restore_ms = true;
...
}
...
if (restore_ms) {
USE(ms);
}
...
}
and complains about possible use of uninitialized variable 'ms'.
Sadly initialize 'ms' to zero to hide this false positive.
Change-Id: I1fb3949070c8abbf4aa45a740f0ca2fdb753d4fa
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7681
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-by: Ian Thompson <ianst@cadence.com>
Tested-by: jenkins
Current code tests a function pointer against a numeric value that
is the same enum type as returned by the pointed function.
Clearly the author was willing to call the function and check its
returned value.
Fix the check by calling the function.
Detected through 'sparse' tool.
Change-Id: I27d18d26c2c797160a397daa32835c199014b70b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Checkpatch-ignore: GIT_COMMIT_ID
Fixes: 237e894805 ("reworked etm/etb into a generic etm part with trace capture")
Reviewed-on: https://review.openocd.org/c/openocd/+/7599
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Commit 07e1ebcc12 ("jtag: drivers: with pointers, use NULL
instead of 0") incorrectly inverts the check, making the driver's
pathmove operation not functional and triggering two clang errors.
Fix the check on malloc() returned pointer.
Change-Id: If1f220aca67452adbcd3a1c9cf691fc984b16b27
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 07e1ebcc12 ("jtag: drivers: with pointers, use NULL instead of 0")
Reviewed-on: https://review.openocd.org/c/openocd/+/7656
Tested-by: jenkins
When gatemate_set_instr() fails, the array pointed by
bit_file.raw_file.data is not freed.
Issue identified by OpenOCD Jenkins clang build.
Free the array while propagating the error.
Change-Id: I2f7fadee903f9c65cdc9ab9b52ccb5803b48a59d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 682f927f8e ("pld: add support for cologne chip gatemate fpgas")
Reviewed-on: https://review.openocd.org/c/openocd/+/7632
Tested-by: jenkins
Reviewed-by: Daniel Anselmi <danselmi@gmx.ch>
Let source file to include its file .h to validate the exported
prototypes.
Detected through 'sparse' tool.
Change-Id: I8ae2f8f1fdaea5683e157247463533b17237e464
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7602
Tested-by: jenkins
On 32 bit hosts, gcc should consider constants without suffix as
32 bits values.
Use the suffix 'ULL' to guarantee it is a 64 bit.
Detected through 'sparse' tool.
Change-Id: I205ca986968fef9a536f87492d1f6c80e41829f3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7601
Tested-by: jenkins
Don't compare pointers with 0, use NULL when needed.
Don't assign pointer to 0, use NULL.
Detected through 'sparse' tool.
Change-Id: Ifa81ba961c0d490cc74880b4a46b620e6358f779
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7598
Tested-by: jenkins
Don't compare pointers with 0, use NULL when needed.
Don't assign pointer to 0, use NULL.
Don't pass 0 ad pointer argument, pass NULL.
Detected through 'sparse' tool.
Change-Id: I3f867cb9c0903f6e396311e7b3970ee5fb3a4231
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7597
Tested-by: jenkins
Let source file to include its file .h to validate the exported
prototypes.
Detected through 'sparse' tool.
Change-Id: I5de107b4f8a468f0e37f06171f5f0c3c0546db1a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7596
Tested-by: jenkins
Add static type to symbols that are not used elsewhere.
Detected through 'sparse' tool.
Change-Id: I2bdac5d2b06a6dbed5c27bfdb1cf36eee90ad823
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7594
Tested-by: jenkins
On 32 bit hosts, gcc should consider constants without suffix as
32 bits values. Adding a cast to convert it to 64 bits should not
be enough.
Use the suffix 'ULL' to guarantee it is a 64 bit.
Detected through 'sparse' tool.
Change-Id: If6be35bd3cbbc7c3a83e0da1407e611f07ff6e06
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7593
Tested-by: jenkins
Don't compare pointers with 0, use NULL when needed.
Don't assign pointer to 0, use NULL.
Don't pass 0 ad pointer argument, pass NULL.
While there, check for return value from malloc(), replace an
assert() with a LOG_ERROR(), drop a useless cast.
Detected through 'sparse' tool.
Change-Id: Ia7cf52221b12198aba1a07ebdfaf57ce341d5699
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7592
Tested-by: jenkins
Add static type to symbols that are not used elsewhere.
Detected through 'sparse' tool.
Change-Id: I00e151d2466868a5dce028444d326defb80d4826
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7591
Tested-by: jenkins
It looks like a false positive.
Scan-build considers as possible to:
- have list_empty() return false;
- list_for_each_safe() to not execute any loop, thus not assigning
a non-NULL value to 'block';
- the NULL pointer 'block' is passed to list_del().
This is not possible because with list_empty(), the loop runs at
least once.
Rewrite the function to simplify the code and making it easier for
scan-build to check it.
This also drops an incorrect use of list_for_each_safe(), where
the 'safe' version was not required.
Change-Id: Ia8b1d221cf9df73db1196e3f51986023dcaf78eb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 8d1dcf293a ("target/espressif: add application tracing functionality over JTAG")
Reviewed-on: https://review.openocd.org/c/openocd/+/7608
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Tested-by: jenkins
When the function xtensa_queue_dbg_reg_read() returns error, the
array 'tmp' remains not initialized and scan-build complains while
computing buf_get_u32() that:
Result of operation is garbage or undefined
Check the returned value of xtensa_queue_dbg_reg_read() and
propagate it.
Change-Id: If0aaad068b97ef0a76560e262d16429afd469585
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 8d1dcf293a ("target/espressif: add application tracing functionality over JTAG")
Reviewed-on: https://review.openocd.org/c/openocd/+/7607
Tested-by: jenkins
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Below warnings are fixed.
1- A function declaration without a prototype is deprecated in all
versions of C [-Werror,-Wstrict-prototypes]
2- error: variable set but not used [-Werror,-Wunused-but-set-variable]
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I1cf14b8e5e3e732ebc9cacc4b1cb9009276a8ea9
Reviewed-on: https://review.openocd.org/c/openocd/+/7569
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
ARMv8-R platforms are similar to ARMv8-A regarding
JTAG and most cpu registers. ARMv8-R doesn't has MMU
but has MPU instead.
ARMv8-R platforms can be AArch32 only such as Cortex-R52,
or AArch64 capable like Cortex-R82.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Change-Id: Ib086f71685d1e3704b396d478ae9399dd8a391e1
Reviewed-on: https://review.openocd.org/c/openocd/+/6843
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Linux kernel and user space border is 0xc0000000 not 0xc000000
Signed-off-by: panciyan <panciyan@eswincomputing.com>
Change-Id: I6b487cce62ac31737deca97d5f5f7bbc081280f4
Reviewed-on: https://review.openocd.org/c/openocd/+/7570
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This feature allows to transfer arbitrary data between host and
ESP32 via JTAG.
The main use cases:
1- Collecting application specific data
2- Lightweight logging to the host
3- System behaviour analysis with SEGGER SystemView
4- Source code coverage
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I95dee00ac22891fa326915a3fcac3c088cbb2afc
Reviewed-on: https://review.openocd.org/c/openocd/+/7163
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
If hart can't change pc (e.g. it is running), resume command should
fail.
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: I14627366d574d806ea16262b7d305d8161f8bcc2
On MacOS libc includes files from MacOSX.sdk that define the macro
#define __nonnull
without arguments, causing compile error.
Extend the existing check for clang on MacOS and undefine the
macro for gcc too.
Change-Id: Ic99de78348c6aa86561212a3aded9342e5d32e02
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7571
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Tested-by: jenkins
Minor changes due to kernel switch to 100 char/line.
Added four new functions.
Silent checkpatch; we don't want to diverge from Linux reference
code.
Checkpatch-ignore: MACRO_ARG_REUSE, UNNECESSARY_PARENTHESES
Checkpatch-ignore: MACRO_ARG_PRECEDENCE
Change-Id: I1d2ff25bf3bab8cd0f5c9be55c7501795490ea75
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7568
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The file list.h is taken from Linux and includes two similar
implementation of double linked lists:
- with single linked list's head (hlist_*), and
- with double linked list's head (list_*).
While the former offers a minor memory footprint improvement,
keeping two implementations makes harder for newbie developers
to approach them.
So far only the latter implementation has been used and no new
patches in gerrit is going to change that.
Drop the support for lists with single linked head.
It can be easily taken back from git history, if needed.
Change-Id: I420e5de38ab755fdfbeb2115538c61818308ec2b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7567
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Add the fast read method to speed up flash verification
after programming. Works the same as fast write already
implemented.
Signed-off-by: François LEGAL <devel@thom.fr.eu.org>
Change-Id: I74611a3542a88212f0483ec8ee368aba3d1f03c7
Reviewed-on: https://review.openocd.org/c/openocd/+/7564
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The condition to check if the workspace area (used by actual MIPS code
executed on target) and data area (sandbox to put data to be read/written
to/from flash) is wrong, thus preventing the use of FAST_* commands to
program/verify FLASH.
Signed-off-by: François LEGAL <devel@thom.fr.eu.org>
Change-Id: Ic68424b7f42d44e550433a120093db5e7980fd56
Reviewed-on: https://review.openocd.org/c/openocd/+/7563
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
1.
update the rtos->thread_count in time, to make sure the allocated
thread_name_str and extra_info_str could be freed by
rtos_free_threadlist(). Otherwise the abnormal return may cause a
memory leak.
2.
remove a redundant assignment to threadid.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Change-Id: Ifabc59d501c925b3d6aec8b04b2856d2c31cc4e2
Reviewed-on: https://review.openocd.org/c/openocd/+/7549
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Since the deletion of `-rtos hwthread`, there is no need to treat harts
with `-rtos` specified differently on reset.
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: I88a9129936b5172bb7479dfa1255e29ff460c054
No other attempt is made at doing anything hypervisor-specific. Are
other things necessary?
Change-Id: Ib65f114888840cf0878f9bfe028c9a42b436aa3f
Signed-off-by: Tim Newsome <tim@sifive.com>
If the file read abnormally, need to close it which was opened before.
Signed-off-by: panciyan <panciyan@eswincomputing.com>
Change-Id: I6142f154741dcd38088b7add2793219ee4dd2ae9
Reviewed-on: https://review.openocd.org/c/openocd/+/7546
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This also fixes an incorrect return ERROR_xx from a jim command,
propagated from return value of rtos_smp_init().
Change-Id: Icf4893c00aabd8fadd60077c5e8a2e926f687518
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7511
Tested-by: jenkins
Print one entry per line.
While there add the mandatory 'usage' field.
Change-Id: Ia832684817f3bdbfa4cb943cd97e3f9fb2605902
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7510
Tested-by: jenkins
Print one entry per line.
While there add the mandatory 'usage' field.
Change-Id: I135556e12154e33fdbd0f71d89f6fe37c69813b7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7509
Tested-by: jenkins
While there add the mandatory 'usage' field.
Change-Id: I3e5b826ca58f7ade30a443ada0cb4a9cd9ea35c2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7508
Tested-by: jenkins
While there add the mandatory 'usage' field.
Change-Id: I5389881dac25877dc32930ec36ee546e48ecc14d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7507
Tested-by: jenkins
While there, fix typo on 'exceeds'.
In a following patch, the output could be formatted and split in N
values per line to make it easier to read by humans.
Change-Id: I295111a80934393011e46311f6cf6c13f2bdc0a3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7503
Tested-by: jenkins
While there, format in a human readable way the output list by
using one line per tpiu name.
Change-Id: I937c92b6c1e92509cf8aa96be1517a51bc363600
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7501
Tested-by: jenkins
While there, format in a human readable way the output list by
using one line per dap name.
Change-Id: I24a47350105b90db15808c61790f05d807120739
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7498
Tested-by: jenkins
While there:
- check the number of command parameters;
- add the mandatory 'usage' field.
Change-Id: I7cd16f049753caedf19f313f7dc84be98efdba42
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7497
Tested-by: jenkins
While there add the mandatory 'usage' field.
Change-Id: I316fb31e24e94985dcc724e428b0384be7ef5bdd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7496
Tested-by: jenkins
While there add the mandatory 'usage' field.
Change-Id: I3491ed79d11c5a3e81cc9afd2423da14b8df72ff
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7495
Tested-by: jenkins
While there:
- format in a human readable way the output list by using one line
per tap name;
- add the mandatory 'usage' field.
Change-Id: I295449220c78fac8973478b265413342ea832f61
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7494
Tested-by: jenkins
While there, format in a human readable way the output list by
using one line per cti name.
Change-Id: I6d4870ee512fe7e6935d73355c2377ad805ccc3b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7492
Tested-by: jenkins
While there, add a check for target halted and check the number of
parameters accordingly to the command name.
Change-Id: I9e8bb109c35039561997d14782fac682267aee65
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7491
Tested-by: jenkins
This also fixes an incorrect return ERROR_TARGET_NOT_HALTED from a
jim command.
Change-Id: I99a02a21bedb64e60944e295c7cf24356e07be60
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7490
Tested-by: jenkins
This also fixes a mistake of the jim command returning ERROR_xx
when function rtt_read_channel_info() returns error.
While there:
- format in a human readable way the output dictionary list, while
preserving the structure of its TCL data;
- add check for the number of parameters.
Change-Id: Ica2b623699d3a606d3992975c836dae96f74b26d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7489
Tested-by: jenkins
Use full 64 bits in output; no reason to truncate at 32 bits.
Change-Id: I433815a381e147731ff0da2c805170649a9bcf38
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7487
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
The mixed use of jim commands and OpenOCD commands is error prone
due to handling of errors through JIM_xx and ERROR_yy.
Rewrite the jim command 'flash list' as OpenOCD command.
While there:
- format in a human readable way the output dictionary list, while
preserving the structure of its TCL data;
- add the mandatory 'usage' field.
Change-Id: I1ee69870d3ab3c1cfc46cd2b8ec03de6b2300bd6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7486
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
The mixed use of jim commands and OpenOCD commands is error prone
due to handling of errors through JIM_xx and ERROR_yy.
Rewrite the jim command 'transport select' as OpenOCD command.
This fixes and incorrect check for the return value of function
transport_select(); it returns ERROR_yy but the check is on JIM_xx.
While there, fix the coding style.
Change-Id: I9f3e8394c1a0cc0312b414c58275e1220217bbed
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7485
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
The mixed use of jim commands and OpenOCD commands is error prone
due to handling of errors through JIM_xx and ERROR_yy.
Rewrite the jim command 'ocd_find' as OpenOCD command.
Change-Id: Id775bccc12840bcf95d8c19787beda5e7c3107fc
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7484
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
The command 'svf' is the only command in OpenOCD that accepts
options in both forms 'option' and '-option'.
Deprecate the option format without the leading '-'.
Update the documentation and fix the on-line help.
While there:
- switch to use the new nvp.h helper;
- return ERROR_COMMAND_ARGUMENT_INVALID on invalid command args;
- fix some minor coding style rule.
Change-Id: I5b944403d92a3fa1e12d5faafc1d2a139bc16a7d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7534
Tested-by: jenkins
If svf_set_padding() returns error, jump to free_all label to
prevent any memory leak.
Propagate the error reported by svf_set_padding() instead of
overwriting it.
Use command_print() instead of LOG_ERROR() for command output.
Change-Id: I61fd89cad10652f2f9ef1f9d48a040e35253c3d4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7533
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The file descriptor svf_fd is not closed on command error, thus
leaking memory.
Close svf_fd on errors.
While there, properly initialize svf_fd using NULL instead of 0.
Change-Id: I5efe9ce576a3a50588b30000222665e26161dfdc
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7532
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: <kai.schmitz@advantest.com>
The code for JTAG WAIT recovery did not handle DP_SELECT
endianness.
While on it, mark missing ADIv6 DP SELECT1 handling as TODO.
Change-Id: I44f3bc8fc9fd2483c0293b6d4f2c51a60ca01873
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7540
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The multidrop SWD is also supported.
Change-Id: I9fefc54fc9d40a75194285cd6e0f10c5c347d9b6
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7537
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The value returned by target_get_gdb_arch() is something specific for GDB.
There could be several variants of the same CPU.
If we start implementing all the variants, checking the string value,
could become incorrect.
It's better to check for xtensa->common_magic == XTENSA_COMMON_MAGIC
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I20f3fdced176c3b9ab00f889743161ecad7280f9
Reviewed-on: https://review.openocd.org/c/openocd/+/7536
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Almost written from the beginning in a modern OpenOCD way.
- Endiannes support
- Proper variable types
- Align with the other rtos implementations
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I0868a22da2ed2ab664c82b17c171dc59ede78d10
Reviewed-on: https://review.openocd.org/c/openocd/+/7444
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Icount triggers don't have a maskmax field at all. This is a cut and
paste error.
Change-Id: I001b3d41bf683599706dba713f7be475e8dd1668
Signed-off-by: Tim Newsome <tim@sifive.com>
When permission bits R, W, and X in PTE all three are zero,
the PTE is a pointter to the next level of the page table;
otherwise, it is a leaf PTE. Here PTE_W is missed.
Change-Id: I82a4cc4e64280f0fcad75b20e51b617520aff29b
Signed-off-by: panciyan <panciyan@eswincomputing.com>
-noreset: when using several SVF input files in a sequence it is not always
desireable to have a JTAG reset between the execution of the files.
The -noreset option skips this unwanted reset.
-addcycles <x>: some tests rely on a certain number of extra clock cycles
between the actual JTAG commands. The -addcycles option injects a number
x cycles after each SDR instruction.
Signed-off-by: Kai Schmitz <kai.schmitz@advantest.com>
Change-Id: I31932d6041dbc803be00016cd0a4f23fb2e7dbe1
Reviewed-on: https://review.openocd.org/c/openocd/+/7433
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The macro JIM_EMBEDDED was required to be defined before including
jim.h in applications that embed jimtcl.
This requirement has been dropped in 2010 by removing the file
dos/Embedder-HOWTO.txt from jimtcl in
https://github.com/msteveb/jimtcl/commit/2d8564100c86#diff-3e93fa55e666
Drop the macro definition and the comment that mandates it.
Change-Id: I36883f60f25bb25839e4ebf908159569659764dd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7518
Tested-by: jenkins
Not all compilers nor compiler versions supports the attributes
used in OpenOCD code.
Collect in a single file the workaround to handle them.
Change-Id: I92d871337281169134ce8e40b2064591518be71f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7519
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
- Manual integration of NX support from xt0.2 release
- No new clang static analysis warnings
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I95b51ccc83e56c0d4dbf09e01969ed6a4a93d497
Reviewed-on: https://review.openocd.org/c/openocd/+/7356
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
We were previously not zero-initializing ELF segments between p_filesz
and p_memsz (aka BSS). However, this may be necessary depending on the
user's application. Therefore, start doing so.
Change-Id: I5a743390069583aca7ee276f53afeccf2cac0855
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7513
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
All DIDs are taken from "SAM R34/R35 Errata Sheet" (DS80000834A).
Signed-off-by: Andrew Lalaev <andrey.lalaev@gmail.com>
Change-Id: Ie35f58e61bb02919c0676c91938c90192481d995
Reviewed-on: https://review.openocd.org/c/openocd/+/7521
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
According to the datasheets these MCUs have 40Kb RAM.
Signed-off-by: Andrew Lalaev <andrey.lalaev@gmail.com>
Change-Id: I52b8a0c86035bccd6f3c1a478bb2e558bca4ae86
Reviewed-on: https://review.openocd.org/c/openocd/+/7520
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The driver tries to open mpsse engine for each vid pid
pair in sequence. If more vid/pid pairs are configured and
the USB device does not correspond to the first pair,
the driver shows 'unable to open ftdi device ...' error.
Match vid pid with the whole list as used in jtag_libusb_open()
instead of multiple mpsse_open() in for loop over vid/pid pairs.
Change-Id: I8ef55205be221c727607fe25b81ae21de0d96f02
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7529
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Can be employed by a driver with custom libusb open.
Change-Id: I00c8a01df8780891a8b7c30e2e34ab191acdf9a8
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7528
Tested-by: jenkins
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Untested, because I don't have a target that implements this.
Change-Id: Iff82c124e7caf8e8960a9da62d8e727afb2c6b8a
Signed-off-by: Tim Newsome <tim@sifive.com>
It is possible for triggers of the same type to support different match
field values, so it is needed to try all the triggers, not just the
first one.
Fixes issue #788.
Signed-off-by: Evgeniy Naydanov evgeniy.naydanov@syntacore.com
Change-Id: I4c9fbc98bae7259377456d9ad8e770232724a592
We should avoid using x16~x31 register in program buffer because there
are no such general purpose registers in RVE(Embedded) extension.
For targets that support rvE, when the parameter increment=0
and count>1 of the read_memory_progbuf function, openocd will cause
an error due to the use of the s2 register.
For example:
{Command} {riscv repeat_read} count address [size=4]
Change-Id: I8b74dcc15cd00a400f2f1354c577a82132394435
Signed-off-by: Hang Xu <xuhang@eswincomputing.com>
* Calculate the FreeRTOS type sizes and offsets more adaptively.
The definition of TickType_t varies between different targets. And it is also related to configUSE_16_BIT_TICKS option.
Thus introduce a new command to make sure we are using a correct ticktype size.
Change-Id: I9e38b331a9f07b96eb9a2c259e32377fca0106ad
Signed-off-by: Chao Du <duchao@eswincomputing.com>
* redundant semicolon.
Change-Id: Ia21f0537e476099d8fe519ef78b3328d14123a38
* Update after review.
Change-Id: I1825185ec9b0557d7e01f34a8f366661b3734aa7
* update doc
Change-Id: I24b21c88b02ca3d76f1362f2545e86c068fc0ec6
---------
Signed-off-by: Chao Du <duchao@eswincomputing.com>
This probably crept in when merging in upstream in the past.
Change-Id: Iccce4515b6b5d4a90773f6d432754b065fb240bb
Signed-off-by: Tim Newsome <tim@sifive.com>
We currently fail the transfer when issuing more than 255 transactions
at once, e.g.
> read_memory 0x10000000 32 256
CMSIS-DAP transfer count mismatch: expected 257, got 1
This is because the protocol only supports 255 transactions per packet
(65535 for block transactions), and as a result we truncate the
transaction count when assembling the packet. Fix it by running the
queue when we hit the limit.
Change-Id: Ia9e01e3af5ad035f2cf2a32292c9d66e57eafae9
Signed-off-by: Peter Collingbourne <pcc@google.com>
Fixes: 40bac8e8c4 ("jtag/drivers/cmsis_dap: improve USB packets filling")
Reviewed-on: https://review.openocd.org/c/openocd/+/7483
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The OpenOCD commands produce their TCL text result through the
pair command_print() and command_print_sameline().
The latter is used to concatenate output in a single line.
At the end of a sequence of command_print(), the last LF is taken
as part of the command result, while it is not always needed, and
it is even annoying when the output of two commands needs to be
concatenate in a single line.
Using command_print_sameline() in place of the last call to
command_print() would solve the problem but it's quite expensive
in term of coding to fix all the existing commands.
Drop the last LF, if present.
Commands that would specifically need a LF as last char, can add
an extra LF at the end of the output.
Document this behavior in command.h.
Change-Id: I6757c20fbfce923dd393083146e8d5a1f3b790b4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7471
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The 'current thread' was not set when no FreeRTOS task created. Which could lead a wrongly invoking of freertos_get_thread_reg_list.
Change-Id: I0e0f8327080ef698d7ed4aae5ac2a630d532ddeb
Signed-off-by: Chao Du <duchao@eswincomputing.com>
* target/riscv: hide_csrs configuration option
This option allows users to mark certain CSRs as hidden so they could be
expluded from *reg* output and target.xml
Change-Id: Iddf8456cd3901f572f8590329ebba5229974d24a
* Update doc/openocd.texi
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
---------
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
* Add command "exec_progbuf"
Command "exec_progbuf" allows to execute a user-specified sequence
of instructions using the program buffer.
Change-Id: If3b9614129d0b6fcbc33fade29d3d60b35e52f98
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
* Updated the doc:
- Minor reword and reorder of the sentences.
- Added information about C-instructions in progbuf.
- Fixed a typo (per the review).
- Added examples.
Change-Id: I88c9a3ff3c6b60614be7eafd3a6f21be722a77b7
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
* Cosmetic changes
Change-Id: I7135c9f435f640e189c7d7922a2702814dfd595f
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
---------
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Co-authored-by: Jan Matyas <jan.matyas@codasip.com>
Also refactor shared code for clearing itrigger/etrigger/icount.
Change-Id: Iac2e756332c89d2ed43435391e3c097abc825255
Signed-off-by: Tim Newsome <tim@sifive.com>
A bunch of new SPI flash (Adesto, Cypress, XTX Tech, mainly octal)
IDs and SPI FRAM (Infineon) IDs added. Backward compatible change
of ID interpretation: The previously unused 4th byte now acts
as continuation code (0x7F) count for manufacturer id, cf.
JEDEC JEP106BC. Currently this affects only some recent octal flash
and FRAM devices, which are only supported by stmqspi and cmspi
flash drivers.
Change-Id: Ibdcac81a84c636dc68439add4461b959df429bca
Signed-off-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6929
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Because riscv_program_exec() tries to add an instruction every time
through.
This would cause an error accessing vector registers where VL > 14(?).
Change-Id: Ie676ca8c9be786b46aa2a4b4028ac8b27f7a4b40
Signed-off-by: Tim Newsome <tim@sifive.com>
This should make vector accesses work on 64-bit harts that implement
Zve32*. There doesn't appear to be any way to easily determine what vsew
values are allowed, so try and notice the failure.
Change-Id: Ide0722d0d67da402a4fbe88163830094e46beb84
Signed-off-by: Tim Newsome <tim@sifive.com>
While there, fix some coding style error and remove the now unused
function jim_arc_read_reg_name_field() and the macro
JIM_CHECK_RETVAL().
Change-Id: I140b4b929978b2936f2310e0b7d1735ba726c517
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7426
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
Use a COMMAND_HELPER() to avoid memory leaks when the helper
COMMAND_PARSE_NUMBER() returns due to an error.
While there:
- fix potential SIGSEGV due to dereference 'type' before checking
it's not NULL;
- fix an incorrect NUL byte termination while copying to
type->data_type.id and to bitfields[cur_field].name;
- fix some coding style error;
- remove the now unused function jim_arc_read_reg_type_field().
Change-Id: I7158fd93b5d4742f11654b8ae4a7abd409ad06e2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7425
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
Use a COMMAND_HELPER() to avoid memory leaks when the helper
COMMAND_PARSE_NUMBER() returns due to an error.
While there:
- fix potential SIGSEGV due to dereference 'type' before checking
it's not NULL;
- fix an incorrect NUL byte termination while copying to
type->data_type.id and to bitfields[cur_field].name;
- fix some coding style error.
Change-Id: Ide4cbc829871a6a523026ccc0d3100dadc2afd06
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7424
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
Long ago jim_nvp was part of jimtcl. When jimtcl dropped it,
OpenOCD kept copy of it in its code base. Current code of jim_nvp
is still related with jimtcl data types and functions.
With the target of better isolating OpenOCD code from jimtcl,
create a new file nvp.c that re-proposes only the core of the old
jim_nvp, dropping any link with jimtcl and removing the string
'jim' either from the filename and from the code.
Keep the same license from the old code, as the new files are
clearly derived from it.
Change-Id: I273448cf1f1484b10f6b6113ed7bb0fcf946482b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7423
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
The command is specified through COMMAND_HANDLER. It should not
return JIM_OK / JIM_ERR.
Change-Id: I56666414d49b0298ecc23ec7ef30c77e1e27afa8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7413
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
Also drop arc_cmd_jim_get_uint32() that is now unused.
Change-Id: Ic26c3f008376db3f01215bf736fca736dd1c1a4f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7412
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
This also fixes several incorrect return ERROR_xxx from a jim
command.
Change-Id: I34fe3552d3dc344eac67bf504c5d5709b707fdfd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7411
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
This also fixes an incorrect return ERROR_OK from a jim command.
Change-Id: I72a522645f62b99b313573c8bad6d4f674c5ae53
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7410
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
This also fixes an incorrect return ERROR_OK from a jim command.
Change-Id: I1f9cf5d1dfa38b8a06042b5f54209e6ee2fc4e0e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7409
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
This also fixes an incorrect return ERROR_OK from a jim command.
Change-Id: Iab9bc7c25181341a632f608a8ef2d8b0bea72520
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7408
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
This also fixes an incorrect return ERROR_OK from a jim command.
Change-Id: I3c51355e7e05965327ce819a3114e370f2de5249
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7407
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
OpenOCD currently uses improper "fence" instruction:
"FENCE" opcode with empty predecessor and successor sets.
Such instruction has no effect and is reserved for future use
as a HINT instruction (RISC-V Unprivileged ISA spec V20191213,
section 2.9).
This patch fixes it by using the proper "fence rw,rw"
instruction.
Change-Id: Ia2a66059009153efef27279410850ddfd73dae38
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
SW-DPv2 and SWJ-DPv2 devices do not reply to DP_TARGETSEL write cmd.
Ignore the received ACK after TARGETSEL write.
While on it, use swd_ack_to_error_code() for unified error code
translation of the received ACK value for all other commands.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: If978c88c8496e31581175385e59c32faebfd20aa
Reviewed-on: https://review.openocd.org/c/openocd/+/7383
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: zapb <dev@zapb.de>
And add its own header to the rtos_xxx_stackings.c
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I084130fde7ee8645129a7cf60bb7bf59448e2f39
Reviewed-on: https://review.openocd.org/c/openocd/+/7441
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
No functional change, the delay is unchanged.
Change-Id: I5b5e837d741ac01fc573657357c5fe61ad901319
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7262
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
After setting adapter speed to some values, the driver
shows the real speed little bit higher.
Although it does not impose a problem from technical point
of view because the difference is smaller than usual speed error,
it looks at least strange to the user. The documentation reads
that real frequency should be same or lower than requested.
Use proper rounding in speed -> delay and delay -> speed
conversions.
Change-Id: I1831112cc58681875548d2aeb688391fb79fa37f
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7261
Tested-by: jenkins
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
bitbang_swd_exchange(rnw=true,...) calls bitbang_interface->swd_write()
with swdio clamped to 0.
bitbang_swd_write_reg() reads 1 turnaround bit, 3 ack bits
and 1 turnaround by one call to bitbang_swd_exchange()
and then switches SWDIO to output.
AFAIK all bitbang interfaces switch SWDIO GPIO direction immediately
in bitbang_interface->swdio_drive().
The GPIO now drives SWDIO line to the value stored in the output register
which is always zero from previous bitbang_swd_exchange(rnw=true,...).
In case the following data bit (bit 0) is 1 we can observe a glitch
on SWDIO:
_____ out 1 ____
HiZ/pull-up ----\ /
\ /
\______ out 0 ______/
swdio_drive(true) swd_write(0,1)
The glitch fortunately takes place far enough from SWCLK rising edge
where SWDIO is sampled by the target, so I believe it is harmless
except some corner cases where the reflected wave is delayed on long
line.
Anyway keeping electrical signals glitch free is a good practice.
To keep performance penalty minimal, pre-write the first data
bit to SWDIO GPIO output buffer while clocking the turnaround bit.
Following swdio_drive(true) outputs the pre-written value
and the same value is rewritten by the next swd_write()
instead of glitching SWDIO.
Change-Id: I72ea9c0b2fae57e8ff5aa616859182c67abc924f
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7260
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The OpenJTAG driver logs "num_cycles > 16 on run test" warning
whenever the JTAG_RUNTEST operation cycle count is larger than 16.
Instead of logging the warning and only running the first 16 TCLK
cycles, remove the warning and queue up multiple operations of up
to 16 cycles each.
Signed-off-by: N S <nlshipp@yahoo.com>
Change-Id: Id405fa802ff1cf3db7a21e76bd6df0c2d3a0fe61
Reviewed-on: https://review.openocd.org/c/openocd/+/7420
Tested-by: jenkins
Reviewed-by: Jonathan McDowell <noodles-openocd@earth.li>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Works for the proprietary rt-kernel from rt-labs.
See: https://rt-labs.com/product/rt-kernel/
Change-Id: Id2c2e292c15fb17eab25e3d07db05014daa2a2b0
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6668
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This is optional field for the targets which has to implement
their custom stack read function.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Icbc9ed66a052fc2cc0ef67e3ec4d85ab0c2c1b94
Reviewed-on: https://review.openocd.org/c/openocd/+/7442
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Other OSes have separate files to keep stack register offsets.
Adding them for NuttX as well will provide a clearer way to expand.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I1428fefefa199a95431f2073c0279dd7028ad8da
Reviewed-on: https://review.openocd.org/c/openocd/+/7250
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This generalizes the little endian CRC32 function used in the OR1K
target and moves it to a common helper, so that other places do not need
to reinvent the wheel. It is directly used in the OR1K target.
Change-Id: I0e55340281a5bfd80669bb1994f3a96fecc1248a
Signed-off-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7415
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Polling the target makes no harm during PSoC 4 flash write in the current
OpenOCD code. Don't mask it.
Change-Id: I6625ded0162ee3a96b92188844d0d2d6c30101c2
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7162
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The commands 'jtag newtap' and 'swd newdap' have to work either on
HLA transport and on standard JTAG/SWD. Having a dedicated
implementation for HLA is a non-sense.
Reuse the generic code jim_jtag_newtap() and drop the files
hla_tcl.[ch] as they are now empty.
Change-Id: I9dabbdc2a6f338f23b2fd3ed1a4dc3da0200c080
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7428
Tested-by: jenkins
The same code is currently used for commands 'jtag newtap' and
'swd newdap' (plus dapdirect versions), but for SWD case the code
skips the parsing of the command line as not every flag is used.
This has the drawback that syntax errors get unchecked.
Move the check about the transport so the command line get always
parsed even when the corresponding flags are not useful.
Change-Id: I596c3beb04e9e8a9ebe6ee68a61395b679d43b3e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7427
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The line reset SWD sequence is used quite often in SWD multidrop mode.
Prevent the ugly connect/disconnect adapter firmware bug workaround
to be called before each line reset.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Id85bff075dba9077e4e501e2cdcfd64d5d9d0531
Reviewed-on: https://review.openocd.org/c/openocd/+/7381
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
DAP_TransferBlock command saves n - 3 bytes in comparison to DAP_Transfer,
where n is number of transfers.
Use DAP_TransferBlock optionaly to save some USB bandwidth.
The change increases the speed of the write transfer
from 40 KiB/s to 42 KiB/s @ USB FS, adapter speed 1000.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ifde0159cfd44481d2b81b90daa088e731c03e26d
Reviewed-on: https://review.openocd.org/c/openocd/+/7372
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
DAP write transaction occupies 5 bytes of a command packet.
DAP read transaction needs just one byte in a command packet
and expect 4 bytes in a response.
The fixed maximal number of transactions in a packet caused
packet filling less than optimal.
Compute both command and expected response sizes based on
read or write direction of each transaction.
Run the queue if one of sizes does not fit into a packet.
The change increases the speed of the mostly read transfer
from 36 KiB/s to almost 40 KiB/s @ USB FS, adapter speed 1000
due to reduction of adapter inserted RDBUFF reads.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ib70812600eaae0403b8ee8673b6f897348496569
Reviewed-on: https://review.openocd.org/c/openocd/+/7364
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
USB bulk backend needs to avoid zero sized USB packets
sent after each full sized packed for performance reasons.
HID backend uses fixed size HID reports so the full size
of the report can be utilized.
Introduce packet_usable_size to reflect it.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I34094c9edac5730624480711cbd6aa65883c47c7
Reviewed-on: https://review.openocd.org/c/openocd/+/7363
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Not all variables converted, JTAG part is left as is.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ie9cc890769a2f53cb3a07fd457030e1b98910d44
Reviewed-on: https://review.openocd.org/c/openocd/+/7362
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Replace the direct dereference of cmsis_dap_handle by dereference
of the dap function parameter wherever possible.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I32601dbe0270267642720a8524706aa76d187c3b
Reviewed-on: https://review.openocd.org/c/openocd/+/7361
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Move all pending request FIFO related variables to
the struct cmsis_dap
Pure refactoring, no functional changes.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I2cea9c1e265ac102ec0f314767b8b9afdcda9ee9
Reviewed-on: https://review.openocd.org/c/openocd/+/7360
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Simply move numicro M0 flash write assembly to contrib/loaders. Also,
modify corresponding Makefile and generated numicro_m0.inc.
To make the path more general, this patch rename the path
"contrib/loaders/flash/numicro_m4" to "contrib/loaders/flash/numicro" as
well.
Signed-off-by: Jian-Hong Pan <chienhung.pan@gmail.com>
Change-Id: I9adea24c2b3c97319a9b015cf50257f3d131dc26
Reviewed-on: https://review.openocd.org/c/openocd/+/7346
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch is picked from the flash part of OpenOCD-Nuvoton's commit
("flash: supported Nuvoton M4 series. jtag: Used HW reset instead of
auto reset. tcl: added a configuration file for Nuvoton M4 series.") [1]
to support flashing Nuvoton's Cortex-M4 chips: M541 & NUC442/472 series.
The code comes from the commit basically. Jian-Hong Pan tweaked for the
compatibility with current OpenOCD. So, leave the author as Zale Yu.
[1]: https://github.com/OpenNuvoton/OpenOCD-Nuvoton/commit/c2d5b8bfc705
Signed-off-by: Zale Yu <cyyu@nuvoton.com>
Signed-off-by: Jian-Hong Pan <chienhung.pan@gmail.com>
Change-Id: I9dc69eccb851df14c1b0ce2f619d7b3da0aa92aa
Reviewed-on: https://review.openocd.org/c/openocd/+/7329
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch is picked from the flash part of OpenOCD-Nuvoton's commit
("flash: supported Nuvoton M4 series. jtag: Used HW reset instead of
auto reset. tcl: added a configuration file for Nuvoton M4 series.") [1]
It reorders Nuvoton MCU part list and spreads out the way to define the
banks' base address & size of the parts.
The code comes from the commit basically. Jian-Hong Pan tweaked for the
compatibility with current OpenOCD. So, leave the author as Zale Yu.
[1]: https://github.com/OpenNuvoton/OpenOCD-Nuvoton/commit/c2d5b8bfc705
Signed-off-by: Zale Yu <cyyu@nuvoton.com>
Signed-off-by: Jian-Hong Pan <chienhung.pan@gmail.com>
Change-Id: I1f21f54dfdf53e5b8ea04d803347d1dbc8c321a0
Reviewed-on: https://review.openocd.org/c/openocd/+/7339
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The org.gnu.gdb.arm.m-system GDB feature defines the name in lowercase
letters.[1] Not adhering to the definition can cause issues with tools
interacting with the GDB which expect the correct casing.
[1]: https://sourceware.org/gdb/onlinedocs/gdb/ARM-Features.html
Change-Id: I0b6584a78f86b053947d79686baad5dac3ec4a00
Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7292
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
- Do not warn the user about adapter speed not being set
if the selected adapter does not support configurable speed.
This would be confusing to users.
- Minor reword in the "adapter speed is not selected" warning.
- Print the adapter name in the "adapter doesn't support
configurable speed" log entry
- Another minor reword: autoselect --> autoselecting
Signed-off-by: Jan Matyas <matyas@codasip.com>
Change-Id: I4c198b547544fd8199921f092153562c5f159134
Reviewed-on: https://review.openocd.org/c/openocd/+/7269
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Do not read ID from SPI flash and suppress autodetection
if non-zero flash bank size is configured.
Change-Id: Idcf9ee6ca17f9fa89964a60da7bf11e47b4af5e7
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7241
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Cortex-M support for SMP multicore targets.
This SMP implementation unlike older ones does not act
on the first halted target found. It polls targets
until a SMP group is finished and stores eventual
'halted' events instead of emitting them. As soon as polling
of a group is done, poll proceeds with SMP related tasks.
This approach improves detection of a reason why debug
stopped - a correct reason is detected for all targets,
not only for the first found.
Drawback: SMP target group should be defined in the same
order as the targets were defined.
Obsolete gdb 'J' packet/smp_gdb command core switching is not implemented,
use with rtos hwthread.
Only one core is resumed if debug_execution is requested.
Some ideas taken from Graham Sanderson's [4936]
and src/target/aarch64.c
Added error checking of armv7m_restore_context().
Change-Id: I60f5b79e74b624dc2b5835ff10e38ac2ccb23792
Link: [4936]: target/cortex_m: Add smp support for Cortex M | https://review.openocd.org/c/openocd/+/4936
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7239
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
When pointer authentication is enabled, some upper bits of the link
register (LR[63:VA_SIZE]) are used to store a signature. Therefore, GDB
need to remove the signature to get backtraces.
GDB has support of pointer authentication. When pointer authenticaion is
enabled, GDB requests 8-bytes mask to the target to remove the
signature. mask[63:VA_SIZE] should be all set and mask[VA_SIZE-1:0]
should be all cleared. GDB removes the signature by addr&~mask or
addr|mask.
I added a feature to provide the mask for pointer authentication.
Signed-off-by: Koudai Iwahori <koudai@google.com>
Change-Id: I56fbbf9cc23619b6536ecd326f350c8bf137f322
Reviewed-on: https://review.openocd.org/c/openocd/+/7248
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Extended feature. This is a large patch, but is self-contained to the
eCos support and does not affect any other openocd functionality. It
does NOT affect existing eCos RTOS plugin users where their
applications do not provide the extended symbolic helper
information. If the helper symbols are not available the rtos support
code will behave as before. This "dynamic" functionality is *required*
because eCos does NOT have a fixed/hardwired, known, layout for the
thread descriptor structure. The per-application build eCos
configuration can affect the shape of the thread descriptor structure
(field presence, and hence offsets of subsequent fields) such that
constant values cannot be used to consistently interpret all possible
eCos application configurations. For historical reasons, there is not
yet a consistent namespace for the helper symbols across eCos HALs
hence the support is currently limited to specific architectures
(Cortex-M and ARM/Cortex-A). No new Clang analyser warnings are raised
by this changeset.
Change-Id: Ib3a36877326eeb56595cbca55e21b9e59a59c98a
Signed-off-by: James G. Smith <jsmith@rallysmith.co.uk>
Reviewed-on: https://review.openocd.org/c/openocd/+/6275
Reviewed-by: Alex Schuilenburg <alex.schuilenburg@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The HiFive Inventor uses this flash chip, so adding it will allow for
openocd to be used to program it. These values were taken from the
chip's documentation.
Signed-off-by: Fawaz Tirmizi <fawaz@rivosinc.com>
Change-Id: I15c9d35f99d4500f73134cdc2d1b9ab6279b491c
Reviewed-on: https://review.openocd.org/c/openocd/+/7135
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
In any case flag will be set as examined.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I5177ee656f726a807269e2f4725223f50e49e855
Reviewed-on: https://review.openocd.org/c/openocd/+/7231
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
With OpenOCD v0.12.0 released, drop the workarounds for 'expr'
syntax change by reverting:
- commit 320043c054 ("openocd: fix for polling during "expr"
computation");
- commit c7eaaf6204 ("openocd: prepare for jimtcl 0.81 'expr'
syntax change").
Replace the call to target_call_timer_callbacks_now() with call
to target_call_timer_callbacks().
Change-Id: Iae5afc50e3f688e11176a52648efc9a6577a9a11
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7405
Tested-by: jenkins
The target nds32 and its companion adapter aice have not received
any real improvement since 2013.
It has been hard to keep them aligned during the evolution of
OpenOCD code, with no way for maintainers to really check if they
are still working.
No real documentation is present for them in OpenOCD.
The nds32 code triggers ~50 errors/warnings with scan-build.
The arch nds32 has been dropped from Linux kernel v5.18-rc1.
For all the reasons above, this code has been deprecated with
commit 2e5df83de7 ("nds32: deprecate it, together with aice
adapter driver") and tagged to be dropped before v0.13.0.
Let it r.i.p. in OpenOCD git history.
While there, drop from checkpatch list the camelcase symbols that
where only used in this code.
Change-Id: Ide52a217f2228e9da2f1cc5036c48f3536f26952
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7382
Tested-by: jenkins
In FreeBSB 13.0 the build fails due to redefined macro __packed.
src/jtag/drivers/esp_usb_jtag.c:19:9: error: '__packed' macro
redefined [-Werror,-Wmacro-redefined]
#define __packed __attribute__((packed))
^
/usr/include/sys/cdefs.h:223:9: note: previous definition is here
#define __packed __attribute__((__packed__))
^
1 error generated.
Drop the macro and align the code with the other files in OpenOCD
project, where the attribute is directly applied without using a
macro.
Change-Id: I89ae943e77036206d40d4d54172cd4a73e76e5c5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Wojciech Puchar <wojtek@puchar.net>
Reviewed-on: https://review.openocd.org/c/openocd/+/7435
Tested-by: jenkins
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
This patch fixes two corner-cases of finding RTT control block.
The first one is when there was a partial match (even single byte) at
the end of loaded buffer (uint8_t buf[1024]), but this was not part of
full match. In that case `cb_offset` was not updated correctly and the
returned `*address` was lower by the legth of the partial match. In case
of searched 'SEGGER RTT' (the default control block ID) string, it was
enough to match `buf[1023] == 'S'`, which is quite likely to happen, and
the `*address` was offset by 1 (e.g. it was 0x20000fff instead of
0x20010000).
Updating (or even maintaining) `cb_offset` is not needed, as start
address of control block can be calculated based on memory address that
was loaded into `uint8_t buf[1024]`, the offset within this buffer and
the length of expected string.
The second issue is when control block is prepended with a byte that
matches first ID character, e.g. there is `SEGGER RTT` control block ID
is prepended by another `S`, making memory contents be `SSEGGER RTT`. In
that case there was no match found.
Fix that issue by making sure that tested byte is always compared with
first byte of expected control block ID.
While at it, change names of local variables to better describe their
meaning.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Change-Id: I12aa6e202bf12bedcbb888ab595751a2a2518a24
Reviewed-on: https://review.openocd.org/c/openocd/+/7429
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This command is supposed to be a start at a compliance test for system
bus access. It doesn't pass against spike because it doesn't handle all
cases where the interface might be busy. It's not documented. As far as
I know nobody uses it.
So delete 400 lines of code instead of trying to fix it.
Change-Id: Ib94f2acb95a48f7c07d4f44206ff7373b03857f3
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
This lets the user set an itrigger trigger, which doesn't fit in the
normal breakpoint abstraction.
This implementation only allows control of a single itrigger. Hardware
could support more than one, and that may be useful to catch different
interrupts in different execution modes. But it would make the code/UI
more complex and it feels like an unlikely use case.
Change-Id: I76c88636ee73d4bd298b2bd1435cb5d052e86c91
Signed-off-by: Tim Newsome <tim@sifive.com>
Cores armv8m, e.g. Cortex-M33, can be instantiated without the
optional Security Extension.
In this case, the secure registers are not present and when GDB
try accessing them it triggers a set of errors.
For armv8m cores without security extension, don't provide to GDB
the description of the secure registers.
Change-Id: I254478a4cf883e85b786df3f62c726b2f40d88d9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7402
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
With flag --enable-verbose, configure enables compiling some
conditional code that with new gcc triggers an error:
error: '%04x' directive output may be truncated writing
between 4 and 8 bytes into a region of size 5
[-Werror=format-truncation=]
Extend the buffer to contain the full 8 bytes of %04x on a 'int'
and change the limit in snprintf.
Skip the intermediate buffer 's[4]'.
Align the code to the coding style.
Change-Id: Ifc8a6e4686555578a7355a1f6049471fd5e31913
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Karl Hammar <karl@aspodata.se>
Reported-by: Tommy Murphy <tommy_murphy@hotmail.com>
Fixes: https://sourceforge.net/p/openocd/tickets/376/
Reviewed-on: https://review.openocd.org/c/openocd/+/7403
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Flashing a SAMD21J17D was failing during NVM erase. The samd21
datasheet specifies that one cause of error conditions is executing an
NVM command while the previous command is still running. The solution
is to wait for INTFLAG.READY after a command is issued.
SAMD21J17A was not exhibiting this problem. Perhaps the later silicon
revision has slower NVM erase times.
Signed-off-by: Dan Stahlke <dan@stahlke.org>
Change-Id: I19745dae4d3fc6e3a7611dcac628e067cb41e0f0
Reviewed-on: https://review.openocd.org/c/openocd/+/7391
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The command 'vdebug mem_path' is reported in the documentation as
'{Config Command}', but the code sets mode = COMMAND_ANY.
The code of the commands sets some value that is only used during
the init phase, so the documentation is correct.
Change mode of command 'vdebug mem_path' to COMMAND_CONFIG.
Change-Id: Icb940fe382cbc75015273b35dcc8a88fc2a7d0ac
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7395
Tested-by: jenkins
Reviewed-by: Jacek Wuwer <jacekmw8@gmail.com>
When target is stopped in WFI/WFE or is in an infinite loop, the
sampled PC will always return the same value.
Command 'profile' requires that distance between min and max PC
should be at least 2, which is not the case for constant PC, and
incorrectly enforces the check through as assert().
Move the code that reads the optional parameters 'start' and 'end'
and check the gap 'end - start' before running the profile.
For self-computed min and max, increase max (or decrease min) to
match the required constraint.
Drop the assert().
Change-Id: I2be8df8568ce8c889923888c492e4f7ce354b16b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: https://sourceforge.net/p/openocd/tickets/370/
Reviewed-on: https://review.openocd.org/c/openocd/+/7400
Tested-by: jenkins
The implementation of command 'monitor profile' has few
issues:
- the address_space is a signed int, so cannot wrap-around on
space over INT_MAX;
- max address is incremented without check for overflow;
- assert() used on errors instead of returning error codes;
- only handles 32 bits PC;
- output file created and left empty on error.
This patch fixes the first two issues, as a wider fix would be too
invasive and should be postponed in a following series.
Change-Id: Id8ead3f6db0fd5730682a0d1638f11836d06a632
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: https://sourceforge.net/p/openocd/tickets/370/
Reviewed-on: https://review.openocd.org/c/openocd/+/7394
Tested-by: jenkins
Clang complains about the variable 'orig_dfsr' that can be used
uninitialized both in cortex_a_read_cpu_memory() and in
cortex_a_write_cpu_memory().
The issue is caused by an incorrect error path that used to jump
through 'goto out'. The code after the label 'out' is specific to
handle the case of an error during memory R/W; it is incorrect to
jump there to handle an error during the initialization that
precedes the memory R/W.
Replace the 'goto out' with 'return retval'.
Remove the label 'out' that is now unused.
Change-Id: Ib4b140221d1c1b63419de109579bde8b63fc2e8c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7393
Tested-by: jenkins
Commit 35a503b08d ("arm_adi_v5: add ap refcount and add get/put
around ap use") modifies the examine functions of mem_ap, cortex_m,
cortex_a and aarch64 by calling dap_put_ap() and then looking again
for the mem-ap and calling dap_get_ap().
This causes an issue if the system is irresponsive and the examine
fails and left the AP pointer to NULL. If the system was already
examined the NULL pointer will cause a SIGSEGV.
Commit b6dad912b8 ("target/cortex_m: prevent segmentation fault
in cortex_m_poll()") proposes a fix for one specific case and only
on cortex_m.
Modify all the examine functions by skipping look-up for the AP if
it was already set in a previous examine; the target's AP is not
supposed to change during runtime.
Remove the partial fix for cortex_m as it is not needed anymore.
Change-Id: I806ec3b1b02fcc76e141c8dd3a65044febbf0a8c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 35a503b08d ("arm_adi_v5: add ap refcount and add get/put around ap use")
Reviewed-on: https://review.openocd.org/c/openocd/+/7392
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Without the fix, will see "Can not find free FP Comparator" error log
Change-Id: Id0d91cc02b7055e44d27507f9c05ccd48ff49838
Signed-off-by: Nima Palizban <n.palizban@gmail.com>
Fixes: fb43f1ff4e (target: Rework 'set' variable of break-/watchpoints)
Reviewed-on: https://review.openocd.org/c/openocd/+/7389
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
If multiple targets are specified as -rtos <rtos_type>, the
rtos_update_threads was called only if the last target was specified as
rtos, which is inconsistent with other checks of whether or not smp target
is an rtos one.
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: Ie52bc6b6c8f841d31b9590fcbc44e985d3cba0eb
Reviewed-on: https://review.openocd.org/c/openocd/+/7244
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
When OpenOCD receives a step-execution command from GDB and the target
is configured as rtos=hwthread, OpenOCD reconstructs the thread-info.
However, OpenOCD does not restore the thread id which is currently
selected by GDB. Due to this issue, OpenOCD sends the information of
wrong thread to GDB after the step execution.
This commit fixes the above issue by adding a code to save/restore the
thread id selected by GDB.
Signed-off-by: Koudai Iwahori <koudai@google.com>
Change-Id: I761a1141c04d48f1290e4f09baa7c7024f86f36a
Reviewed-on: https://review.openocd.org/c/openocd/+/7358
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
When OpenOCD receives 'g' packet (read general registers) from GDB and
target is configured as rtos=hwthread, hwthread_get_thread_reg_list is
called. However, it does not check if the register valid or not. Due to
this issue, OpenOCD returns invalid register values to GDB.
This commit adds a validity check to hwthread_get_thread_reg_list. If
the register is not valid, it tries to read the register from the
target.
Signed-off-by: Koudai Iwahori <koudai@google.com>
Change-Id: Iad6424b62124271ec411b1dfc044b57dfc460280
Reviewed-on: https://review.openocd.org/c/openocd/+/7357
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Clang ignores that xds110_swd_write_reg() is always called with
bit SWD_CMD_RNW in 'cmd' set to zero.
It then complains that the local variable 'value' gets passed by
address to xds110_swd_queue_cmd() and in case of 'read request'
such stack address get stored for later use:
src/jtag/drivers/xds110.c:1363:1: warning: Address of
stack memory associated with local variable 'value' is
still referred to by the global variable 'xds110' upon
returning to the caller. This will be a dangling
reference [core.StackAddressEscape]
To both xds110_swd_write_reg() and xds110_swd_read_reg(), add an
assert() to inform Clang about the state of bit SWD_CMD_RNW.
Change-Id: I7687c055ec71424b642e152f478723a930966e3a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7380
Tested-by: jenkins
The variable retval is assigned a value that is never used.
Scan-build reports:
Although the value stored to 'retval' is used in the
enclosing expression, the value is never actually read
from 'retval'.
Drop the dead assignment.
Change-Id: I11588dee748a55d52aa7f35bc1967b7df55af7fc
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7379
Tested-by: jenkins
Then also set it when we resume in examine(), which doesn't use the full
abstractions because not all required data structures are filled out
yet.
Hopefully fixes#749.
Change-Id: I0c6ab16da1f035ca2fbdb9f7be1462d44ddce3a0
Signed-off-by: Tim Newsome <tim@sifive.com>
The command should now send the full 5 byte command length, which
includes the command tag (0x19) and the 4-byte baudrate word, instead
of only the last 3 bytes of the baudrate.
Signed-off-by: Nick Kraus <nick@nckraus.com>
Change-Id: Idd6e084efd7492489aa900cdbf08f540944041cb
Reviewed-on: https://review.openocd.org/c/openocd/+/7370
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Exit the loop when no harts are running, instead of when at least one
hart has halted.
Change-Id: Ia69b626bf1fee4034bd5ccc800a651bfe0e53685
Signed-off-by: Tim Newsome <tim@sifive.com>
It used to set all states to halted, but that's not right for harts that
are now unavailable. (It might be possible to call poll() at the right
time instead of duplicating some of its code, but I didn't see an easy
way to do that. The real requirement is that target->state is set to
TARGET_UNAVAILABLE before TARGET_EVENT_HALTED is is sent in
halt_finish(), because that's what triggers hwthread_update_threads(),
which must know about unavailable harts so they can be hidden from gdb.
Change-Id: I0a0bbdd4ec9ff8c9898e04045b84e1d2512c9336
Signed-off-by: Tim Newsome <tim@sifive.com>
When SMP is enabled, gdb will always use the first target in the SMP
group. That doesn't work when that first target is unavailable, but
others in the SMP group are still available.
For cases where gdb expects an operation to affect the entire group (run
control, memory access), find the first available target in an SMP group
and use that.
Change-Id: I4bed600da3ac0fdfe4287d8fdd090a58452db501
Signed-off-by: Tim Newsome <tim@sifive.com>
There used to be entirely separate code paths depending on whether we're
in SMP mode or not. Now they're both the same.
Change-Id: I8f46295e4bc005f441af0c03d4f608c53b8a6586
Signed-off-by: Tim Newsome <tim@sifive.com>
This ensures that we populate the register cache and set target->state.
Some RISC-V changes had upset the balance.
Change-Id: I47fbf8ebd8fe39fa5b752212080f87e3b7e6e5e5
Signed-off-by: Tim Newsome <tim@sifive.com>
We don't correctly write it, so we shouldn't expect it to read back the
same value. Fixes hardware breakpoints on mcontrol triggers.
Change-Id: Ie5e445060ec9c8887af933fd8887e57308330f09
Indicate to the JTAG driver that it does not need
to read and return the DR register value after scanning the
JTAG chain.
riscv_batch_run(), calls jtag_add_dr_scan() to schedule a
DR scan operation. Eventually, this will result in the JTAG
driver performing a JTAG scan to write to or read from DR.
The decision on whether to write to and/or read from DR
register is determined by the second parameter to
jtag_add_dr_scan(), i.e. a "struct scan_field".
Of particular interest here is if
batch->fields[i]->in_value is not NULL, the JTAG developer
must return the DR value collected from the JTAG scan
operation.
When creating the DR scan operation instruction with
riscv_batch_add_dmi_write(), batch->fields[i]->in_value points
to a location in batch->data_in buffer,
meaning batch->field[i]->in_value is not NULL, and the JTAG
developer must therefore read and return the DR value collected.
The returning of the DR value is redundant in a write
operation.
This patch set batch->fields[i]->in_value to NULL to indicate
the DR value need not be returned. This allows the JTAG
developer to optimize away any code associated with returning
the DR value.
Normally, the extra work to return the DR value is negligible.
However, in one usecase it introduces significant delays
In this use case a JTAG driver forwards
all JTAG scan to a server on a network. If the server has to
return the DR value, it has to perform the JTAG scan before
replying to the JTAG driver, and only then the JTAG driver
can send the next JTAG scan operation. However, if there is
no need to return the DR value, the server can
acknowledge the JTAG operation request immediately,thus
signalling to the JTAG driver that it is free to send the next
JTAG scan operation. At the same time of receiving the second
JTAG operation the server will process the original JTAG scan.
This saves time and mitigates network delay. Also, not having
to include the DR value in resulting in smaller reply packet
from server to JTAG driver and save on network traffic.
This doubles download speeds to spike using remote bitbang.
Change-Id: Ibb37c3e32af0cc7006b22b8c4e1f31ed29c21d0f
Signed-off-by: Ooi, Cinly <cinly.ooi@intel.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Ooi, Cinly <cinly.ooi@intel.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Ooi, Cinly <cinly.ooi@intel.com>
It's only used to change what callback events are generated, and there
are none anyway. (That's probably a bug, but since 0.11 is so rare I'm
not going to worry about it.)
Fixes#757.
Change-Id: I5b5df3a9bec927fb0368304229533e2875a83f6b
Signed-off-by: Tim Newsome <tim@sifive.com>
breakpoint_add should use rtos only if request is done by gdb.
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: I779d1a905c6a3640869dca162e3cc001919e8f42
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Thread name loading was not correctly handled if a ThreadX task has a NULL
name.
Signed-off-by: Giulio Fieramosca <giulio@glgprograms.it>
Change-Id: I03071930182bc2585b61ce5d8c67491710883dd6
Reviewed-on: https://review.openocd.org/c/openocd/+/7328
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
target_run_flash_async_algorithm expects the source_buffer to have
at least 2 words reserved for read and write pointers in addition to the
FIFO buffer. If the size of the data to be flashed is <= 8 bytes then
the flash function will fail with "corrupted fifo read pointer" error.
Ensure the allocated buffer is big enough to hold both FIFO buffer and
read/write pointers.
Change-Id: I09c22eaac517b8cfea8e0b463f5deb6b98afd267
Signed-off-by: Simon Smiganovski <simon.smiganovski@fruitcore.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7342
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
armv7m_start_algorithm() saves register values to arch_info->context.
armv7m_wait_algorithm() restores register values from arch_info->context.
Exclude registers with flag exist = false from both loops.
While on it refactor the register restore: introduce 'struct reg' pointer
and dereference it instead of numerous accesses by a full path
from armv7m pointer.
Change-Id: I1600084db84809ee13bcf8e7828b79f8c9ff9077
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7276
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
On some boards there is a HW bug: if fp unit is disabled (fs in mstatus
set to 0), accessing any fp register results in a hang (any abstract
command timeouts, untill the board is rebooted).
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: I0c0d1033889f15dcc326c4078bf9cbb5a8558565
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Clang spots a potential NULL pointer dereferencing that is instead
an incorrect use of an array of pointers:
src/rtos/hwthread.c:254:32: warning: Dereference of null pointer
[core.NullDereference]
(*rtos_reg_list)[j].number = (*reg_list)[i].number;
^~~~~~~~~~~~~~~~~~~~~
The error has not been spotted before because:
- this function is not called for the first core of the SMP node,
- for the other cores on Cortex-A it still returns valid register
value for the first 12 ARM registers, then it diverges.
Also Valgrind does not spot any issue at runtime.
Address the array correctly.
While there, use DIV_ROUND_UP() macro for the computation.
Change-Id: Ib87e60e0edfd9671091f5dcfa9aedaf1aed800d1
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7337
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Commit 0cedf10f8f ("Remove duplicate of a counter in
hwthread_update_threads") introduced a code bug.
In the second foreach_smp_target() loop, variable "threads_found"
gets passed to routine hwthread_fill_thread(). By removing the
counting of threads_found from the second loop, the
incorrect thread counter value gets passed to hwthread_fill_thread().
Change-Id: Ie89e53ccd28bb72b6838ef2f12106a1fe8d00994
Suggested-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7307
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The autodetection of CMSIS-DAP v2 bulk interface is tricky
as not all adapters conform CMSIS-DAP specs.
If an interface has a string descriptor containing CMSIS-DAP,
then OpenOCD did not insisted on the correct interface class
LIBUSB_CLASS_VENDOR_SPEC.
However the relaxed test caused false autodetection of v2 bulk
interface on some CMSIS-DAP v1 adapters with an additional serial
interface with the string descriptor stupidly containing
CMSIS-DAP text.
Make the test less relaxed, refuse autodetection of the interfaces
with the class number of well known functions including CDC and MSC.
Link: https://sourceforge.net/p/openocd/tickets/368/
Change-Id: I917cb257eb42aab93560cc39c61ec35a60ce52e3
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7279
Tested-by: jenkins
Reviewed-by: SilverFox <yyjdelete@126.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The variable retval is assigned a value that is never used, as it
is reassigned few lines below.
Drop the dead assignment.
Change-Id: Id4e9134408fab3e04936d36e95724bf8d3ab55aa
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7304
Tested-by: jenkins
Clang get confused by initializing the array uint16_t lock_word[],
casting it to (uint8_t *), then accessing the second element of
the uint8_t pointer.
src/target/dsp5680xx.c:2046:41: warning: The left operand of '<<'
is a garbage value [core.UndefinedBinaryOperatorResult]
uint16_t tmp = (buffer[0] | (buffer[1] << 8));
~~~~~~~~~ ^
Fix it by replacing the array with a single uint16_t.
The code is still depending on host endianness; no fix for this is
proposed.
Change-Id: I16dfd60cab117dd145aeecf10d9593574ff233a2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7302
Tested-by: jenkins
The function esirisc_jtag_recv() can be called with argument
num_in_fields = 0, for example as consequence of calling
esirisc_jtag_continue().
In this case, num_in_bytes is zero and the allocation of the
variable-length array 'r' requires size zero.
src/target/esirisc_jtag.c:133:2: warning: Declared variable-length
array (VLA) has zero size [core.VLASize]
uint8_t r[num_in_bytes * 2];
^~~~~~~~~ ~~~~~~~~~~~~~~~~
Fix it by forcing size one when num_in_bytes is zero.
Change-Id: Id764c7b5ec4f5b3c18c7da650bbff39fc98ed049
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7301
Tested-by: jenkins
Clang assumes that size could assume a value that is not 1 nor 2
nor 4. In such condition the buffer in t is allocated (size != 1)
and not initialized. This triggers an error:
src/target/openrisc/or1k_du_adv.c:655:14: warning: 2nd function
call argument is an uninitialized value [core.CallAndMessage]
crc_calc = adbg_compute_crc(crc_calc, data[i], 8);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add the default case to cover other values of size.
After this fix, clang still complains on the same line, this time
misunderstanding the limits of the loop and considering that
buf_bswap16() only swaps the first 16 bits, thus passing not
initialized value data[2] to adbg_compute_crc()
Replace malloc() with calloc() to silent it.
Change-Id: I358d7fb2ebefd69255670641bd435b770762a301
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7300
Tested-by: jenkins
All the converters functions:
h_u64_to_le()
h_u64_to_be()
h_u32_to_le()
h_u32_to_be()
h_u24_to_le()
h_u24_to_be()
h_u16_to_le()
h_u16_to_be()
have signed type in their prototype, while the function name and
all the current use cases pass an unsigned value.
Change the prototypes to use unsigned types.
Change-Id: I76dcfdd7912b81f60902184712b2907eae9843f7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7299
Tested-by: jenkins
* gdb_server: Improve info message.
Add target name and state to "Not running when halt was requested"
message.
Change-Id: Ic84e9a884b57caa270cfee0ca6fa6a0dd8e5d2bd
Signed-off-by: Tim Newsome <tim@sifive.com>
* rtos/hwthread: Nicer debug message in hwthread_update_threads()
Change-Id: Ia5931a772476a2ae186ed87cd70d7e4be2f196fb
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
E.g. the Zve* vector extensions have all the same registers as the full
V extension, but leaves misa.V clear.
Change-Id: Ib08c3612c52bb3a6b074d9431e3396c8f2f0ff27
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Prep work for handling unavailable harts.
Change-Id: I9c00ed4cdad8edeaa5a13fbec7f88f40d8af9028
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
* Use match field for trigger
The watchpoint cannot capture all data modifications only through the
trigger of ANY SIZE and EQUAL, and an error will occur. This patch
accommodates watchpoints by adding more types of matches
Change-Id: I5c3c908dbd49ca47755b06f5cdbe451be3a81c8b
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Change-Id: I3670347c4b00bf508373f7cc2f4950cbc09d6e2a
Signed-off-by: Xiang W <wxjstz@126.com>
* Add variable type trigger support
Change-Id: I60922c5f98574040b9a160e2aa0355871a581fe1
Signed-off-by: Xiang W <wxjstz@126.com>
* remove trailing whitespace
Change-Id: I168812e12b459ae3c4b3017c27a9b897e65d9f84
Signed-off-by: Xiang W <wxjstz@126.com>
* update triggers enumerate
Change-Id: I23a66afb0f772934b8911b522d0e4f116917519f
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
* target/riscv: Deal with DMI busy in sample_memory_bus_v1()
Change-Id: I810a4c4b7f02cb40ea99b7a500dce23c1bbd9231
Signed-off-by: Tim Newsome <tim@sifive.com>
* Comment code more clearly.
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
* Remove extra tab
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
If we just invented thread 1 to represent the current execution, we
need to make sure the RTOS object also claims it's the current thread
so that threadx_get_thread_reg_list() doesn't attempt to read a
thread control block at 0x00000001.
Signed-off-by: Ben McMorran <bemcmorr@microsoft.com>
Change-Id: I7f71e730d047858898297e4cb31db8e47e0c371c
Reviewed-on: https://review.openocd.org/c/openocd/+/7280
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* target/riscv Fix dm->current_hartid corruption on hartsellen discovery
Change-Id: Iec969df2675b608365eda2c3a83a4185752430f2
Signed-off-by: Charles Papon <charles.papon.90@gmail.com>
* target/riscv Ensure HART_INDEX_DIRTY does not have side effects
Change-Id: Ie89c94d97cd4f15c1be0327fddff75beea6ae027
Signed-off-by: Charles Papon <charles.papon.90@gmail.com>
Signed-off-by: Charles Papon <charles.papon.90@gmail.com>
This is added for future RISC-V changes. The RISC-V debug interface can
explicitly tell a debugger when a hart is unavailable. This is used for
instance when that hart is powered down (or yet to be powered up out of
reset).
Change-Id: I8a062d59eea1e5b3c788281a75159592db024683
Signed-off-by: Tim Newsome <tim@sifive.com>
`xtensa_do_step` is invoked from `xtensa_prepare_resume` to silently
step over BP/WP before resuming.
For example; in the case of WPs (DEBUGCAUSE_DB), in the current
implementation `xtensa_do_step` will generate one more
`TARGET_EVENT_HALTED` after the original one caused by WP itself.
This patch moves the halted event cb call after
the step is done successfully.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I9048e14fb316dc124847a42cfaefb1f76b5ce53e
Reviewed-on: https://review.openocd.org/c/openocd/+/7274
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
- Fix the declaration of riscv command 'set_mem_access'.
- Remove non existing riscv command 'set_scratch_ram'.
- Add riscv commands 'info', 'reset_delays'; copy the description
from the 'help' text.
- Don't add riscv commands 'set_prefer_sba' and 'test_sba_config_reg'
as they are marked as deprecated.
- Ensure that 'test_sba_config_reg' prints a deprecation warning
when used.
Change-Id: I39dc3aec4e7f13b69ac19685f1b593790acdde83
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7268
Reviewed-by: Tim Newsome <tim@sifive.com>
Tested-by: jenkins
This GPIO driver is common to SoCs that have in-order ARM cores
(BCM2835) as well as superscalar (BCM2836-7) and speculative
out-of-order cores (BCM2711).
For BCM2837 and BCM2711, the processor can dual-issue stores and
is free to merge writes to peripheral memory for pages mapped
MT_NORMAL_NC, which is the default provided by /dev/[gpio]mem.
This can cause glitches (or missing edges) on GPIO pins when
toggled with no delay, as pipelined writes to the same address
can get arbitrarily squelched.
To prevent this happening, make sure the preceding write ops are
flushed outside the shareable domain by using a memory barrier.
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
Change-Id: I8805cc0911667bcb9b7f4ca340d7f4f1cb25d096
Reviewed-on: https://review.openocd.org/c/openocd/+/7258
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* target/riscv: Correctly set target->state in deassert_reset
This bug didn't lead to problems, but it would with some upcoming
changes.
Change-Id: I552acbae9977150c4c9e573f8852033bc80fcebb
Signed-off-by: Tim Newsome <tim@sifive.com>
* Keep debug_reason in sync with state
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Currently 'number' field is zero in the register cache and
this causes an issue on `rtos get_thread_reg_list` calls.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Iaef11e01f55d012969bbc1933f82847d5e02fec5
Reviewed-on: https://review.openocd.org/c/openocd/+/7246
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* [riscv] step operation handler should respect handle_breakpoints parameter
When step operation is requested the OpenOCD frontend (like gdb server
or TCL server) has an option to control how existing breakpoints are
handled upon step.
Some OpenOCD frontends (like gdbserver) may choose to disable special
handling of existing breakpoints - thus handle_breakpoints is set to 0,
while others (like TCL server) expect target handler to temporary
disable the matching breakpoint to allow the step operation to complete
successfully.
In the current implementation handle_breakpoints parameter was ignored
by target-specific handler. Thus, the following sequence of commands:
```
halt
bp <current_pc> 4
step
```
Resulted in *step* operation to not change PC because of bp match.
This commit addresses this issue.
* Adjusted calls to logging facilities (addressed review comments)
Co-authored-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
Co-authored-by: Tim Newsome <tim@sifive.com>
* Properly track selecting multiple harts at once.
use_hasel is a bit of a hack.
Change-Id: Ia589ebc16bca32038d915df9988361b88e940917
Signed-off-by: Tim Newsome <tim@sifive.com>
* Clarifying comment.
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
* Rename set_hartsel to set_dmcontrol_hartsel
Change-Id: Iab28531281aa6fc604ec7d34974ed444ea9ea850
* Make set_dmcontrol_hartsel() more idiomatic.
Change-Id: I56a885043c515359e33b9c8a03aed637c81d1486
* Use constant for multiple harts instead of -1.
Change-Id: Iefeaf74202f2b4918d21f15f7ff7ca514175b8fb
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Also add an early exit for if any harts are unavailable.
Change-Id: I0875d4d213c9faf87b219d8d57e440881366c8f8
Signed-off-by: Tim Newsome <tim@sifive.com>
arp_waitstate will not work on not-examined state
Change-Id: I56c3e1c7e63af108e4ed1dbacebb567f9bf46264
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7230
Tested-by: jenkins
Reviewed-by: Erwan Gouriou
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
An application often idling in real sleep mode may make a Cortex-M target
hard to access as CPU clock are gated and debug requests are responded
by WAIT ack.
Try to examine the target under reset as the last resort.
Change-Id: I7c3de39fb1e6c23b76e2a0a85ab75f23aac94c4d
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7229
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
An application often idling in real sleep mode may make a Cortex-M target
hard to access as CPU clock are gated and debug requests are responded
by WAIT ack.
Try to examine the target under reset as the last resort.
Change-Id: Ife875a966a838c37dde987bc584ad0a1f4d020d6
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7228
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
After merging [1] 'reset halt' does not work on not responding Cortex-M.
Relax the examined tests and try to set vector catch VC_CORERESET
if debug_ap is available.
While on it add an info about examination state to debug logs.
Fixes: [1] commit 98d9f1168c ("target: reset target examined flag if target::examine() fails")
Change-Id: Ie2e018610026180af5997d70231061a275f05c76
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6745
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
For 64-bit TAR setup, if 'tar_valid == false' perform the upper 32-bit
write even if the cached copy matches the upper TAR value to be written.
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Change-Id: I320377dc90a9d1d7b64cbb281b2527e56c7621ee
Reviewed-on: https://review.openocd.org/c/openocd/+/7245
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Read values must be at albuff so that can be copied to buffer
on function exit.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I74a533e8f12f1002ca06a98a7c7cd928552b4cc5
Reviewed-on: https://review.openocd.org/c/openocd/+/7226
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Actually they are the base of epc and eps
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I4f43b9609a9929399fb5d3fa0203efc8a98e94c9
Reviewed-on: https://review.openocd.org/c/openocd/+/7227
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
ST-Link v2 dongles can be used with many cortex-m parts, but they have
one limitation -- they can only perform 8-bit and 32-bit writes to the
target. 16-bit writes are done using a pair of 8-bit writes. While not
usually an issue, in the case of the at91samd flash driver, the 16-bit
'command' register must have both halves written in the same
operation.
Fortunately, this register has two pad bytes above it in the address
space, making it safe to always access with 32-bit operations.
Change-Id: I44b0db9406982a8db5818c0533d3101618741db2
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7234
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
There is no need to count number of examined threads twice.
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: Id32ead853d1ddcd4e67062d6f795700feb20cb4b
Reviewed-on: https://review.openocd.org/c/openocd/+/7223
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The bitbang driver floods the log by many messages with very
little informational value.
Remove some LOG_DEBUGs, convert some others to LOG_DEBUG_IO.
Change-Id: I0c7539467b45543e12932c67dc71e86d58c8c6cd
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7220
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Tested-by: jenkins
Make write to DP_TARGETSEL is logged the similar way as other DP register
read/writes.
While on it fix checkpatch message
'Concatenated strings should use spaces between elements'
Change-Id: I98f724c984e8c4610cc461340f4c4a7cc9627ed9
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7219
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Tested-by: jenkins
armv7m_start_algorithm() stored all non-debug execution
registers from register cache without checking validity.
Check if the register cache is valid.
Try to read from CPU if not valid.
Issue a warning if register read fails.
Change-Id: I365f86d65243230cf521b13909575e5986a87a50
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7240
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
The num_reg_params parameter of target_run_algorithm() was not
updated when setting "sp" was introduced. Therefore "sp" as the last
register parameter was not passed to a target algo.
Introduce a new helper variable with correct count of register parameters
and use it everywhere needed.
Change-Id: I934a71380783d98917167f1569145808ef23540f
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7225
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
This was used to track which hart a given operation must apply to. But
we already have a target associated with each operation, and from there
we can find the desired hart id. dm013_info_t already tracks
current_hartid (meaning which hart ID is currently selected by the DM).
This makes the code simpler to understand. Also it turns out we don't
need to make sure the correct hart ID is currently selected because
there are only a few real entry points.
Change-Id: Ibe8d5e156523397f245edd6ec0a5df3239b717bf
Signed-off-by: Tim Newsome <tim@sifive.com>
Change-Id: Idf3bce842b4507c1f12692b5fbcd6730637de9db
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7216
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Tested-by: jenkins
Flash read_id/erase/write operation on running target failed
in target_run_algorithm() anyway. It generated lot of error messages.
Check the target state and bail out early if target is running.
Change-Id: I903f5f38c8e61016e5002b235e5f07803bd2ec4e
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7215
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
SPI flash erase often takes longer than the fixed timeout 3 seconds.
Introduce a configurable timeout_ms parameter to rp2040_call_rom_func().
Compute the erase timeout from the number of blocks to be erased.
While on it make the timeouts shorter for connect flash, flush cache and
enter/exit xip (1 second is enough).
Change-Id: I552bfa317ee17064de3a54ec2f0c63e84ba87222
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7214
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
The size of the flash write buffer should be rounded
down to the multiply of flash page size.
Using write chunks of unadjusted size results in write of chunks
unaligned to flash pages.
Change-Id: If7931362ee193dff4dc2df7ec78f13530658cf08
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7187
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
While on it restore memory-mapped mode also after flash erase
(originally was restored after flash write only).
Change-Id: I5e153b79ac27a8439f57239ce90ce8a79c0bb8a1
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7186
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Prepend stack_grab_and_prep() function name by rp2040_ prefix.
Introduce target helper variable in rp2040_stack_grab_and_prep()
and use it instead of dereferencing bank->target several times.
Move flash ID reading code to the new rp2040_spi_read_flash_id()
function.
Change-Id: I9d6e51e17e36e6230155a586065499f2f260089a
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7185
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
liangzhen
Parshintsev Anatoly
Tim Newsome
Kirill Radkin
Ahmed Boughanmi
Marek Vrbka
Vincent Fazio
Tomas Vanek
Daniel Anselmi
Evgeniy Naydanov
Tarek BOCHKATI
Fedi Bouzazi
Antonio Borneo
Daniel Goehring
Luca Hung
Brandon Pupp
Ahmed BOUDJELIDA
Artur Rojek
Marcin Niestroj
Jason Peck
Nishanth Menon
Bruno Mendes
Karl Palsson
Xiang W
Nikolay Dimitrov
Mark Zhuang
eolson
Artemiy Volkov
Erhan Kurubas
Marc Schink
Laurent LEMELE
Chao Du
iosabi
Jacek Wuwer
Bohdan Tymkiv
Ian Thompson
Jan Matyas
Matthijs Kooijman
Amaury Pouly
Tarek BOCHKATI
Paul Fertser
Julien Massot
panciyan
François LEGAL
Chao Du
Kai Schmitz
Peter Collingbourne
Andrew Lalaev
Hang Xu
Anatoly Parshintsev
Jan Matyas
Andreas Bolsch
Daniel Serpell
N S
Andreas Fritiofson
Marian Buschsieweke
Jian-Hong Pan
Zale Yu
Boris-Chengbiao Zhou
Jan Matyas
Koudai Iwahori
James G. Smith
Fawaz Tirmizi
Kyle Schwarz
Dan Stahlke
Nima Palizban
Dolu1990
Nick Kraus
Evgeniy Naydanov
Giulio Fieramosca
Simon Smiganovski
Ben McMorran
Jonathan Bell
Keith Packard
mrv96
Dmitry Ryzhov