Commit Graph

422 Commits

Author SHA1 Message Date
Tim Edwards cd68a2aeff Made several corrections to errors found in the netlists: (1)
Fixed rstb_h, which was being input to low-voltage blocks.  (2)
Fixed flash_csb_ieb_core and flash_clk_ieb_core, which were not
output from housekeeping as they should be;  the solution was
to tie the INP_DIS lines low at the pad by connecting them to
the TIE_LO_ESD line.  This should probably be addressed in
housekeeping but would change the current pinout.
2021-11-22 15:21:06 -05:00
Tim Edwards 1e14d3a4c5 Corrected the rstb_l signal in both caravan and caravel, and corrected
the clock_core signal in caravan.
2021-11-22 13:25:35 -05:00
Tim Edwards cfeb62dfb4 A number of changes to the caravan netlists, (1) to correct for
problems that had been fixed recently in caravel, and which cause
the caravan testbench to break, but which were not noticed;  (2)
corrected the count of gpio_control_block modules, which was one
off, with two of them overlapping (not sure how that even passes
simulation, but it did);  (3) fixed a power connection in the
caravel chip_io, which should have caused chip_io to fail LVS,
so apparently LVS was not run on chip_io. . .
2021-11-22 09:46:21 -05:00
Tim Edwards 6eb8bb54de Several more LVS corrections, including fixing a label in chip_io that
got removed from its net by a chang in the LEF view of an I/O pad, and
a lack of declaration of an array to attach to pwr_ctrl_out in the
verilog, which is valid verilog but netgen can't know the bus size
without the no-connect net being declared.  The remaining issue has to
do with separation of ground domains in the mgmt_protect block.
2021-11-21 22:58:39 -05:00
manarabdelaty 331fdee2bb [DATA] Update HK module (li1 routing: 249um) 2021-11-20 15:13:16 +02:00
manarabdelaty 5cd3843f00 [DATA] Update gpio_control_block (li1 used 2um) 2021-11-20 14:43:20 +02:00
manarabdelaty 37fb2d6766 [DATA] update caravel_clocking module (removed long li1 routes, in total it used 8um from li1) 2021-11-20 13:07:23 +02:00
manarabdelaty bf6ad67934 [DATA] Update gpio_control_block pin order to fix shorts at the top level 2021-11-19 13:13:24 +02:00
manarabdelaty 581a22de6a [DATA] Update mgmt_protect (removed all li1 routing ) 2021-11-19 13:11:18 +02:00
manarabdelaty 2574eada93 [DATA] Add initial caravel layout 2021-11-19 01:37:10 +02:00
manarabdelaty 61bf3c651e [DATA] Update mgmt_protect pin placement 2021-11-19 01:33:11 +02:00
manarabdelaty 53b3a9013e [DATA] Update HK pin placement 2021-11-19 01:30:14 +02:00
manarabdelaty 37a07e291b [DATA] Update digital_pll pin placement to have it align with the HK 2021-11-19 01:28:40 +02:00
manarabdelaty 64bdd6230d [DATA] Update caravel_clocking module floorplan 2021-11-19 01:26:29 +02:00
Tim Edwards 488d8fc5bb Fixed another missing line from the management protect block call
in caravel.v.
2021-11-18 08:25:13 -05:00
Tim Edwards 7b82c143b7 Fixed two signals on the mgmt_protect in caravel that got merged
and scrambled somehow.
2021-11-17 14:08:47 -05:00
Tim Edwards 96ef5c83fd Corrected the corner pad connections to vssd and vccd, which were
still pointing to vssd1/vccd1/vssd2/vccd2, variously in chip_io.v
and chip_io_alt.v
2021-11-17 11:44:32 -05:00
manarabdelaty 979d34b7a9 Merge branch 'main' of https://github.com/efabless/caravel_openframe into main 2021-11-17 16:43:59 +02:00
manarabdelaty 1f55f46596 [DATA] Add chip_io views with the fixed clamped3 pad 2021-11-17 16:42:36 +02:00
Tim Edwards 5f1a0029f5 Made the same corrections to caravan as were made to caravel
(clock -> clock_core in caravel_clocking, VPWR -> vccd_core and
VGND -> vssd_core in the instances of modules that were pulled from
the management SoC to the top level).
2021-11-17 09:06:42 -05:00
manarabdelaty b5fe87304a [RTL] Fix power connection to HK/digital_pll/caravel clocking, also fix resetb connection 2021-11-17 13:17:23 +02:00
manarabdelaty d7ae2e1ac1 [RTL] Move inverter from top level to HK
- fixed clock connection to the digital_pll and caravel_clocking
- renamed power pins of the HK/caravel_clocking to VPWR/VGND
2021-11-16 13:59:17 +02:00
Tim Edwards bb1c9fe528 Removed two references for single-macro verilog files that are no
longer in the PDK but have been folded into larger library files.
With the most recent push to open_pdks to fix an error in the I/O
verilog library, the verilog testbenches once again pass.
2021-11-15 17:53:48 -05:00
Tim Edwards 559675d392 Corrected chip_io and chip_io_alt layouts to restore the accidentally
deleted "resetb_core_h" port label.  Corrected the chip_io and chip_io_alt
verilog RTL files to replace the user area power supply clamp cells with
the new clamped3 cell from open_pdks.
2021-11-15 17:13:43 -05:00
manarabdelaty 46540437af [DATA] Add gds/lef/maglef/gl views for the user_id_programming block 2021-11-15 18:17:32 +02:00
manarabdelaty 6203460f57 [DATA] Add views for xres_buf 2021-11-15 18:07:02 +02:00
manarabdelaty 72b2c724c9 [DATA] Add views for caravel_clocking and updated digital_pll clock after constraining clock to 150 MHz 2021-11-15 15:50:43 +02:00
manarabdelaty 56f672bbd8 [DATA] Add HK views 2021-11-15 13:23:54 +02:00
manarabdelaty 85a1ffc5aa [DATA] Add views for the mgmt_protect 2021-11-15 13:21:52 +02:00
manarabdelaty 856539ca59 Update storage testbench to work with one 2K block 2021-11-12 17:14:21 +02:00
manarabdelaty 89bb33fbc0 Merge branch 'main' of https://github.com/efabless/caravel_openframe into main 2021-11-08 13:35:16 +02:00
manarabdelaty bee7b4ed78 Add initial config for the digital_pll 2021-11-08 13:34:59 +02:00
Tim Edwards f53590d4b5 Split the layout of the GPIO defaults block into three versions, for the
three parameterized values used in the RTL verilog.  Modified the
"user_defines.v" file to create verilog definitions that match the C-style
definitions from "defs.h", for convenience/simplicity.
2021-11-06 13:28:26 -04:00
manarabdelaty 59076d499a Update gpio_defaults_block to align the pins with the gpio_control_block 2021-11-05 23:27:32 +02:00
manarabdelaty 49c506f052 Update gpio_control_block after constrainting the clock period to be half the mgmt_core frequency 2021-11-05 18:36:43 +02:00
manarabdelaty e68664101c Update gpio_control_block 2021-11-05 16:54:55 +02:00
manarabdelaty 53b09f43d1 Add gpio_defaults_block views 2021-11-05 12:33:36 +02:00
manarabdelaty 78ce7265c1 Update gpio_control block 2021-11-04 17:58:58 +02:00
manarabdelaty cb9990f97e harden gpio_control_block 2021-11-04 16:19:12 +02:00
Tim Edwards b8dda9c3b1 (1) Corrected an error from a recent commit where the reset was
fixed by moving from after the managment protect to before it, but
an inversion of the signal was missed, leading to an incorrect
wb_rst_i passed to housekeeping.  (2) Revised the method to load
the serial GPIO data chain from a 2-pin, I2C-like method to a
more straightforward 3-pin method with separate reset, clock, and
load pins.  The load pin propagates through the chaing like the
other two.  Added a bit-bang signal for the load signal as well.
(3) Added an implied buffer after the data output of the GPIO
control block to ensure that the data arrives at the next control
block after the clock, to prevent hold violations.
2021-11-03 23:18:36 -04:00
Tim Edwards e09640425a Added the user-power-down version of hkspi (hkspi_power) to the list
of patterns to run in the Makefile for verilog dv, since that pattern
has been debugged and now runs correctly.
2021-11-03 11:33:13 -04:00
Tim Edwards 3b89cf0efa Corrected the clock signal into the housekeeping module, which was
incorrectly assigned to the clock on the user side of the managment
protect block, causing it to be undefined when the user area power
supply is down.  The "hkspi_power" testbench which tests using the
housekeeping SPI while the user area power is grounded now works
correctly.
2021-11-03 11:30:39 -04:00
Tim Edwards fe1fcbc3a5 Modified the padframe definition to keep the vccd domain continuous
around the entire padframe.  The vccd1 and vccd2 domains are local
to their respective pads, and any bus routing must be done inside
the padframe.  This means that all pads operate on global vddio for
3.3V as before, but also global vccd for 1.8V.  The user 1.8V voltage
domain only goes as far as the input to the GPIO control block.
2021-11-03 10:53:09 -04:00
Tim Edwards 1d359690ac Added testbench for checking that the housekeeping SPI is accessible when
the user area is powered down.  Because this requires some changes to the
padframe definition, this testbench currently fails.
2021-11-02 21:58:47 -04:00
Tim Edwards dd66d1e5ca Renamed the poorly and awkwardly named "sky130_fd_sc_hvl__lsbufhv2lv_1_wrapped"
cell to the simpler (and easier to remember) "xres_buf".
2021-10-31 21:43:09 -04:00
Tim Edwards a2aacdb5d2 Removed some commented-out test code from sram_exec.c to make the
code clearer and less cluttered.
2021-10-31 17:06:05 -04:00
Tim Edwards a360b77618 Added a testbench that demonstrates copying a portion of a program in
flash into SRAM and executing it.
2021-10-31 16:58:44 -04:00
Tim Edwards 00e0a5f603 Corrected the two failing testbenches (which needed fixing because
the implementation of the housekeeping module changed the addresses
of the signals being exercised).
2021-10-28 22:20:46 -04:00
Tim Edwards 787f1c3dae Added back wishbone verification tests, specifically those related
to areas not part of the management SoC, including chip_io,
mgmt_protect, and mprj_ctrl and sysctrl_wb (which are now part of
housekeeping).  The two housekeeping tests fail and need to be
debugged.
2021-10-28 17:26:06 -04:00
Tim Edwards 11165bfe3d Added entries in defs.h for the new input enable lines from the
management SoC to the management protect block, and updated the
documentation to include the new wishbone interface for those
signals, and the additional signals on the management SoC pinout.
2021-10-28 10:13:14 -04:00
Tim Edwards 3a57940371 Revised the management protect block to include protections against
an unconnected wishbone bus (unconnected inputs).  Added the missing
signals for the user IRQ enables to management protect (which have
to come from the management SoC).
2021-10-27 19:36:43 -04:00
Tim Edwards 1e7400c0ac Removed unused definitions from user_defines.v, and added more
explanatory comments.
2021-10-25 16:36:18 -04:00
Tim Edwards 745eee1baa Created an "open frame" version of caravan (and revised the one for
caravel, since it had not been updated since a number of changes to
the caravel top level module).
2021-10-25 16:29:12 -04:00
Tim Edwards bc9944ce20 Updated the caravan netlist and implemented the caravan testbench. 2021-10-25 15:08:13 -04:00
Tim Edwards a7fec91c4c Update to the back-door wishbone access to housekeeping to better
implement the arbitration between SPI and back-door.  The back-door
access flags when it is going to do a read or write, and the SPI
can have an invalid read or fail a write if the SPI is too fast,
but the wishbone access should be valid.  As long as the SPI is
much slower than the core clock (say, 1MHz) then there should be no
contention, which means that contention can always be avoided simply
by slowing the SPI signaling down.
2021-10-24 16:58:47 -04:00
Tim Edwards e6a94449ce Modified the housekeeping SPI to generate a read strobe (or rather
status) so that between rdstb and wrstb, the SPI signals when it is
about to read or write a byte.  The back-door wishbone interface then
stalls the CPU during these periods.  That allows the CPU to continue
running while the SPI is being accessed without data collisions and
without having to stall for the entire time CSB is held low.
Because SCK is asynchronous to the clock, rare collisions are still
possible;  this is not expected to be an issue but might be worth
investigating.
2021-10-23 22:06:24 -04:00
Tim Edwards e5c90daddd Implemented a system for setting the GPIO power-on defaults through
via programming.  The values for each of the GPIOs at power-up are
defined in the "user_defines.v" file.  For the verilog, they are
applied as parameters.  For the layout, they will need to be
separately defined cells for each of the GPIOs, or at least for
each set of unique default values.
2021-10-23 17:18:30 -04:00
Tim Edwards 3ffe67e652 Changed the SRAM read-only port signal names to match the change
made to the management SoC wrapper definition---this is just
making the nomenclature better (no functional change).
2021-10-22 11:51:07 -04:00
Tim Edwards e474dbbc99 Corrected the last testbenches, added a new testbench for the spi_master
since the original one was folded into the sysctrl testbench, but that
testbench no longer uses the SPI master.  Moved the SPI master from being
an overlay of the housekeeping SPI to occupying GPIO pins 32 to 35.
Made GPIO 35 a bidirectional pin like 36 and 37 so that the output enable
from the SPI master can be used.
2021-10-21 19:48:24 -04:00
Tim Edwards 43ced83bd8 Correction to the mprj_bitbang testbench to run the test without running
into issues of contention between the SPI and wishbone interfaces.  The
testbench now passes, although the contention isn't handled particularly
well.
2021-10-21 10:57:20 -04:00
Tim Edwards 000a5266ef Corrected an error in the bitbang testbench (but it does not cause the
testbench to pass).
2021-10-19 23:10:51 -04:00
Tim Edwards 184f4a637c Added the rest of the testbenches: mprj_bitbang, perf, pll, qspi, and
storage.  Not all of these pass simulation checks.  Added back the
bit-bang control of the GPIO programming.  Added back the read-only
interface between the housekeeping module and the SRAM 2nd port.
Revised the memory map text document to reflect the addition of the
SRAM ports.  There is not yet a testbench for the SRAM read-only
interface.
2021-10-19 19:05:47 -04:00
Tim Edwards 767342e183 Added a completely revised sysctrl testbench based on accessing the
housekeeping SPI through the back-door wishbone interface.  Checks
most of the SPI registers (but could do more).
2021-10-19 17:32:20 -04:00
Tim Edwards e2f6a02688 Added and verified testbenches timer, timer2, uart, and user_pass_thru. 2021-10-18 21:53:09 -04:00
Tim Edwards 0fa2e3bb89 Added testbenches for irq, mem, mprj_ctrl, and pass_thru (note that "mem"
does not pass yet and still needs to be debugged).
2021-10-18 20:32:50 -04:00
Tim Edwards 2e57b5da08 Added and debugged two more testbenches, gpio_mgmt and hkspi. 2021-10-18 11:25:26 -04:00
Tim Edwards 33ca4e11ef Additional corrections, mostly to the housekeeping module. The
top-level simulation now passes the GPIO testbench.
2021-10-17 21:38:40 -04:00
Tim Edwards 1863a7c529 A number of small corrections. 2021-10-16 23:55:57 -04:00
Tim Edwards 842200b7ec Changed the memory map to move the 2e and 2f wishbone domains into
the 26 domain (now dedicated to the housekeeping module), with
2e0... now 261... and 2f0... now 262...  Although this is not
strictly backwards-compatible, the addresses in defs.h have been
modified so that C code remains valid with a recompile.
2021-10-16 17:58:36 -04:00
Tim Edwards 2f74fa83ee Reinstated the logic analyzer as a standard interface for the
management SoC.
2021-10-16 17:42:24 -04:00
Tim Edwards bdfa747145 First major update; current code passes syntax checks in iverilog
and simulates, but fails testbench (not surprising at this stage).
2021-10-15 21:49:49 -04:00
Tim Edwards 332f9ec2e7 Seeding with documentation of pinout and verilog RTL (mostly unchanged
from original except to remove blocks that are not supposed to be in
this repository like the processor core and the storage).
2021-10-12 16:31:42 -04:00