Commit Graph

1348 Commits

Author SHA1 Message Date
Spencer Oliver 8d86633eb7 docs: update OpenOCD url's to openocd.org domain
Change-Id: I8b55c8d12773a1c36f2fd2afeecf20a74e890064
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/2698
Tested-by: jenkins
2015-04-16 20:28:21 +01:00
Paul Fertser 68921d2316 tcl/target/stm32f3: fix reset init for stlink
Use mmw to manipulate only selected bits of the word. msb and mwb verify the
memory location and may error on PLLRDY set as a result of PLLON written.

Change-Id: I9a4c1e58f002a1e5e99be1bd34aac27ba65d111d
Reported-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2702
Tested-by: jenkins
2015-04-16 20:26:36 +01:00
Felipe Balbi da7b65a93b board: ti_am43xx_evm: remove xds100v2 interface
GP and EPOS EVMs do not provide xds100v2 on board,
rather they have a pin header which can be used
to attach any debug pod the user might want.

Change-Id: I61678c50900fbe0fab500ea42f85ecde7a490ded
Reported-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2618
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-16 20:24:37 +01:00
Tomas Vanek f3b1405fdd AT91SAM4L: handle reset run/halt in SMAP
This is a remake of http://openocd.zylin.com/1966
originally written by Angus Gratton <gus@projectgus.com>

ATSAM4L has a "System Manager Access Port" (SMAP) that holds the CPU
in reset if TCK is low when srst (RESET_N) is deasserted.
Without this change any use of sysresetreq or srst locks the chip
in reset state until power is cycled.

A new function smap_reset_deassert is called as reset-deassert-post event handler.
It optionally prepares reset vector catch and SMAP reset is released then.

Change-Id: Iad736357b0f551725befa2b9e00f3bc54504f3d8
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/2604
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 15:47:43 +01:00
Uwe Bonnes 2175bb149a turtelizer2-revC: Tested with real hardware.
Also some hints around deprecated tcl/interface/turtelizer2.cfg added.

Change-Id: Ifa57b49febffaeddd5d8ff0a48833d3544927b10
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2584
Tested-by: jenkins
Reviewed-by: Harald Kipp
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 12:07:22 +01:00
Andreas Färber 39a7085d36 tcl/board: Add Infineon XMC 2Go config
Tested with "J-Link Lite-XMC4200 Rev.1 compiled Jan 10 2014 20:31:33".

Change-Id: Iefa9185372341d889db2b5f1f93bce126450b535
Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2564
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:53:20 +01:00
Andreas Färber e8aa3524d2 tcl/board: Add Infineon XMC1100 Boot Kit config
Tested with "J-Link Lite-XMC4200 Rev.1 compiled Jul 18 2014 17:28:26".

Change-Id: Icc03172cefe38f2217bf44a73f94f8a6fb93dfba
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2472
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:52:35 +01:00
Andreas Färber a5844ace23 tcl/target: Add Infineon XMC1000 family target config
Basic target config, verified against XMC1100 AA/AB, XMC1200 AA/AB,
XMC1300 AA/AB manuals.

The default adapter_khz was tested with the XMC1100 Boot Kit.

Change-Id: Iff6ed52d875ccb83c0d4ff0d555b90e0f28b860c
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2471
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:52:20 +01:00
Andreas Färber aee1b1d570 tcl/board: Add Spansion SK-FM4-176L-S6E2CC config
Works best after update to firmware v2.3.

Change-Id: Id2d3a0ae28bba014ee5338df9280fe39773c3398
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2570
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:51:32 +01:00
Andreas Färber fd23fb4c6e tcl/target: Add Spansion FM4 config
Assembled by trial-and-error for an S6E2CC.

Change-Id: I317c12d24c9075ce3de286455fa3ee45731c5c81
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2569
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:50:44 +01:00
Ed Beroset 7a7086e644 em357: Corrected EM357 support including errata details
Original submitted code had only been tested with em358, but testing with
actual em357 revealed errors that this patch corrects.

Change-Id: I70cf31210de8ed84e3755a56e76261ad200322bb
Signed-off-by: Ed Beroset <beroset@ieee.org>
Reviewed-on: http://openocd.zylin.com/2581
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:48:50 +01:00
Paul Fertser d06b09595b tcl/interface/parport: default to sane value on non-windows systems
When using ppdev driver 0 is the most appropriate default value as it
corresponds to /dev/parport0. Raw port address is suitable only for
direct access (I think that's parport-giveio on windows).

Reported by danitool on IRC.

Change-Id: I983c22251de6601b433ad31aaf660fb664cee7e9
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2572
Reviewed-by: Andreas Färber <afaerber@suse.de>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:42:32 +01:00
Jeff Ciesielski 7407046e3d tcl/board: Add Infineon XMC4500 Relax Kit config
Tested with "J-Link Lite-XMC4000 Rev.1 compiled Dec  7 2012 19:23:07"
on XMC4500 Relax Lite Kit V1.

Change-Id: Ib680a444fa4cadbf640afba15d607c0e6bd4ab2c
Signed-off-by: Jeff Ciesielski <jeffciesielski@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2567
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:38:19 +01:00
Jeff Ciesielski 58aee57883 tcl/board: Add Infineon XMC4200 Application Kit config
Change-Id: I3a946ba3745da651d470cd574222ba5c7147ac9d
Signed-off-by: Jeff Ciesielski <jeffciesielski@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2566
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:37:40 +01:00
Andreas Färber df22965783 tcl/board: Add Infineon XMC4500 Application Kit configs
Tested CPU_45A-V2 (General Purpose) with ARM-USB-TINY-H (via SWD) and
with "J-Link Lite-Cortex-M V8 compiled Jul 17 2014 11:40:12" firmware.

Tested CPU_45B-V1-006 (SDRAM) with ARM-USB-TINY-H (via SWD) and
with "J-Link Lite-XMC4200 Rev.1 compiled Jul 18 2014 17:28:26" firmware.

Change-Id: I3451117606551671ec77722f6adf7d7a6a4bd576
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2481
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:36:58 +01:00
Andreas Färber c048d1f7b1 tcl/target: Add Infineon XMC4000 family config
Base config, verified against XMC4500, XMC4400 and XMC4100/XMC4200 manuals.

Change-Id: I10907bdf307bc6d11dc5454bf5391758de49dc30
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2480
Tested-by: jenkins
Reviewed-by: Jeff Ciesielski <jeffciesielski@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14 11:36:04 +01:00
Felipe Balbi b1f3e89970 tcl: icepick: add icepick_d_set_coreid
this is just to avoid open coding that in
icepick_d_tapenable. Cleanup only, no functional
changes.

Change-Id: Iabd20291b7bdd95957afa1c74f52171789201227
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2624
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:23:56 +01:00
Felipe Balbi c32f81f718 target: icepick: call icepick_c_setup
it also works on icepick_d.

Change-Id: I50c0c81286aae673c94ea77e47454ff48eab1668
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2623
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:22:47 +01:00
Felipe Balbi b6cb48c212 target: icepick: switch over to icepick_c_router
Reusing what's already there to ease maintainability.

Change-Id: I2030581669c644e2d9d9f9968075ab6344445d04
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2622
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:22:07 +01:00
Felipe Balbi 1d8c36e16a tcl: target: am437x: pass coreid
This commit is only for the sake of completeness as
default coreid is zero. In any case, coreids 1-4 are
used for the different PRU cores inside the SoC.

Change-Id: I775f2f444b1a908ffaf7bdbc43bcc966f19668c4
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2621
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:21:05 +01:00
Felipe Balbi beb61c6999 target: am437x: use more descriptive names
Use more descriptive names for JRC and DAPs
so they more closely match documentation.

For example there's no Cortex A9 DAP, that's
the DebugSS DAP where Cortex A9 target sits. In
that same DAP we have have ETM, STM and both
dual-PRU subsystems.

Change-Id: I0e66ebb6299763f96606fae3e4c62e5785c804f2
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2620
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:19:56 +01:00
Felipe Balbi 0c20f1ff3f target: am437x: fix DebugSS DAP ID
Main DAP (where Cortex A9 sits) ID is actually
0x46b6902f. Fix it.

Change-Id: Ifa3335186bcf60d264d4ecea477bfe2f5ca10ead
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2619
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:18:48 +01:00
Felipe Balbi c8fe9f6b4c tcl: board: add AM437x IDK support
Add support for Texas Instruments AM437x
Industrial Development Kit support.

Change-Id: I33ed71c7392c3805a86cf2c8adce83c0e8aa323d
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2617
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:17:16 +01:00
Felipe Balbi 5df0dfb7f4 tcl: am437x: add reset-init event handler
this event handler will configure and lock PLLs
and configure DDR so platform is placed in usable
state.

Change-Id: Idd02f4c9789181d69578f8606ac3576ea1dd8a0b
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2616
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:15:57 +01:00
Felipe Balbi d85a0a6a0c tcl: am437x: disable watchdog on reset-end
sometimes, watchdog might be left running and
it could expire in the middle of a debug session,
to prevent that, just make sure to disable watchdog
on reset-end if current state is 'halted'.

Change-Id: Ib4f2a2321cba17cd8c56ca3ae63114a563a6de90
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2615
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:11:52 +01:00
Felipe Balbi 92a01329c9 tcl: am437x: define registers to be used later
a later commit will implement a proper reset-init
handler to lock pll and configure ddr as we should.

Change-Id: I432cf28a5a944bfa83c20aed7298dbd29df30e38
Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2614
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:09:41 +01:00
Felipe Balbi f0d10751fa tcl: board: ti_am43xx_evm: follow xds100v2 requirements
xds100v2 asks us to call these three commands to
guarantee proper behavior, so do it.

Change-Id: Iecf9c148ce7c2082ef915b46eeb511ceea395cc3
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2613
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:07:21 +01:00
Felipe Balbi 03a661a52d tcl: board: ti_am437x_evm: select jtag transport
default already is jtag, but this silences a
warning during startup.

Change-Id: I94478327bbb259649500ef74a5b5c10d51e2a517
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2612
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 11:00:45 +01:00
Felipe Balbi 0baecf9943 tcl: target: am437x: use entire SRAM area
According to AM4379 TRM [1], table 2-1 L3 Memory Map,
we have a total of 256KiB and there's no reason not to
use it all.

[1] http://www.ti.com/lit/ug/spruhl7b/spruhl7b.pdf

Change-Id: I117f2afe721bc4e3f0df304d3542e1a91aa69d12
Signed-off-by: Felipe Balbi <balbi@ti.com>
Reviewed-on: http://openocd.zylin.com/2611
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14 10:59:47 +01:00
Felipe Balbi 589affe35b tcl: target: am437x.cfg: pass correct dbgbase
Since commit ec9ccaa288 (arm_adi_v5: make dap_lookup_cs_component()
traverse subtables and handle multicore) AM437x devices can't be used
with OpenOCD anymore. The reason is that dbgbase used to be set to zero
before that commit and that just happens to work with AM437x devices.

A more robust solution is to pass correct dbgbase when creating the
target, which this commit does.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Change-Id: Iaf2617804324de8094b25137943e08b84f14c75f
Reviewed-on: http://openocd.zylin.com/2602
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-04-14 10:59:08 +01:00
Uwe Bonnes 2af366259f Add configuration for EFM32 Gecko boards with Segger J-Link.
Tested with Tiny Gecko.

Change-Id: Iddb87170b6aaaf7f15d3c4517c8661dd6394be8f
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2585
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25 21:40:57 +00:00
Angus Gratton d90b86d8e3 transport: make 'transport select' auto-select the first available transport if not set
This should allow most of the existing configurations for older
versions to remain compatible without forcing the user to change his
or her config to explicitly select transport.

Also in some circumstances can remove the need to chain a "-c transport
select X" when building custom configs on the command line, which seems
like a common new user pitfall.

Change-Id: Ic87a38c0b9b88e88fb6d106385efce2f39381d3d
Suggested-by: Petteri Aimonen <jpa@git.mail.kapsi.fi>
Signed-off-by: Angus Gratton <gus@projectgus.com>
Reviewed-on: http://openocd.zylin.com/2551
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25 21:32:49 +00:00
Paul Fertser ef02b69b14 drivers/cmsis-dap: port to common SWD framework
Valgrind-tested.

Comparison of flashing performance on an FRDM-KL25Z board running mbed
CMSIS-DAP variant, 5MHz clock, old driver:

wrote 28096 bytes from file demo.elf in 26.833590s (1.023 KiB/s)
verified 27264 bytes in 1.754972s (15.171 KiB/s)

this implementation:

wrote 28096 bytes from file demo.elf in 3.691939s (7.432 KiB/s)
verified 27264 bytes in 0.598987s (44.450 KiB/s)

Also tested "Keil ULINK-ME CMSIS-DAP" with an STM32F100 target, 5MHz
clock, results reading from flash, old driver:

dumped 131072 bytes in 98.445305s (1.300 KiB/s)

this implementation:

dumped 131072 bytes in 8.242686s (15.529 KiB/s)

Change-Id: Ic64d3124b1d6cd9dd1016445bb627c71e189ae95
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2356
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25 21:31:09 +00:00
Paul Fertser 1bc6a81138 tcl/board/twr-k60f120m: remove useless flash bank 0 definition
Since the very first flash bank is already defined in target/kx.cfg,
there's no sense in repeating it.

Reported and tested by Richard Braun.

Change-Id: I417b7072b5e6675ddbf824446e7581b8b7da8f4b
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2595
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25 20:48:11 +00:00
Paul Fertser a09a75653d armv7m: add generic trace support (TPIU, ITM, etc.)
This provides support for various trace-related subsystems in a
generic and expandable way.

Change-Id: I3a27fa7b8cfb111753088bb8c3d760dd12d1395f
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2538
Tested-by: jenkins
2015-03-25 20:46:43 +00:00
Uwe Bonnes 3e1dfdcb85 stm32l1.cfg: Add missing dash to fix f7394049d3 commit.
Change-Id: Ifeb2d4fc2b43813edbc6fe2cf08bfd4c55cd1e86
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2590
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Stian Skjelstad <stian@nixia.no>
2015-03-10 07:35:37 +00:00
Andreas Fritiofson 8d80a25410 tcl: Add default hooks for STM32F3x
Keep clocks running in low power modes. Stop watchdogs from interfering
with the debug session. Set up PLL and increase clock at reset init.

Change-Id: I984d2018f7d47a1042f1e12894563154fa7b566c
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2196
Tested-by: jenkins
Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-03-09 09:20:09 +00:00
Matthijs van Duin dab4adb5ec tcl/interface/ftdi/xdsv2: fix and clarify EMU* signals
The signal names are changed for consistency with TI's docs and
sources.

Change-Id: Ic5c5314daa20f6f610be8a848399f951d47aa137
Signed-off-by: Matthijs van Duin <matthijs@rinnic-vaude.nl>
Reviewed-on: http://openocd.zylin.com/2231
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-03-09 06:27:45 +00:00
Uwe Bonnes f7394049d3 stm32l1.cfg: Add ID Code of Cat.2 devices.
Change-Id: I4eb5020858c1896e294d633213f3df3fa45b6250
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2517
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
2015-03-09 06:26:45 +00:00
Uwe Bonnes a20db2d205 stm32f3x.cfg: Remove duplicate item.
Change-Id: I812c36688add73fab2e74fc112c733c5d3c201a6
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2554
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-03-09 06:26:28 +00:00
Nemui Trinomius 199acf668e lpc2000: Add LPC407x/8x flash size auto detection
This patch adds auto flash size detection for LPC407x/8x series.

Tested on below listed chips.
LPC4088
LPC1788(regression test)

Change-Id: I82f62678a04eac9b84658bd6d1cfdf45be64c931
Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-on: http://openocd.zylin.com/2555
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Jens Bauer <jens@gpio.dk>
2015-03-09 06:26:06 +00:00
Arne Wichmann e3b43b77e9 target & board: AT91SAM7A2 and Olimex SAM7-LA2
Initial Support for AT91SAM7A2 on Olimex SAM7-LA2 board.
The board seems not to be able to reset into halted mode, as srst is
connected to NRESET of the cpu (configured srst_pulls_trst).
JTAG RCLK is connected to CLK.
Tested with interface/ftdi/olimex-arm-usb-ocd-h.cfg.

Change-Id: I2bdd67e3683e45f1119c5850bad294aa107891d8
Signed-off-by: Arne Wichmann <arne.wichmann@gmail.com>
Reviewed-on: http://openocd.zylin.com/2318
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-03-09 06:25:03 +00:00
Paul Fertser 40d6e88268 cfg: add board and target configs for TI SimpleLink Wi-Fi CC3200 LaunchPad
Change-Id: I4396ee737c1dad380aa23894bbd1faf75f26d072
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2465
Tested-by: jenkins
2015-02-22 19:00:34 +00:00
Uwe Bonnes be97da76ab Provide genuine F3 nucleo config and source it for STM32F334 Discovery board.
The F334 disco board has a stlink V.2-1 as F3 nucleo boards. Normal F3 disco
boards use stlink v2 and can't ne used.

Change-Id: I77ebef93b184592f25ff18bb2da776d636f60ff0
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2434
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22 17:59:55 +00:00
Oleksij Rempel 2b0beed4b1 tcl/target|board: add configs for Alphascale asm9260t
This adds configs for Alphascale asm9260t ARM based SoC and
Evaluation Kit based on this chip.

Change-Id: Id8d3a1ef204e3ae84540c2693e3d62650ba82f73
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/2515
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22 17:57:02 +00:00
Andreas Fritiofson 10331d2007 cfg: Fix Kinetis kwikstik/kx config
The flash definition belongs in the target cfg. Add some working area
and suitable reset_config.

Make kx.cfg more similar to klx.cfg.

Disable rclk as it is dead slow and a fixed 1MHz clock seems to work.

Change-Id: I8328f179c3a33be64403da93616abb48651bdfe6
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2227
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22 16:23:48 +00:00
Anton Kuzmin abdd5680cd tcl/interface/ftdi: correct LED config for BusBlaster KT-Link
Configure the LED to be off by default, blink on activity.

Change-Id: I8515ee66c49bddf866268b85811be15c2dbc086c
Signed-off-by: Anton Kuzmin <anton.kuzmin@cs.fau.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2539
Tested-by: jenkins
2015-02-11 22:05:39 +00:00
Andreas Bomholtz bdbe78f131 sim3x: new flash driver for Silabs SiM3 microcontroller family
This is a new driver for Silicon Laboratories SiM3 microcontroller
family, based on the work of Ladislav Bábel. The driver will try to
detect the type of MCU from the device id register, and if this
fails it will use the flash size from the flash bank command.
Driver added to the documentation and to the README.
TCL script added.

Tests:
* Hardware: SiM3C166 (pre-production) and SiM3U167
* Binary: 4kb, 197kb, 256kb
* Flash protect not tested

Change-Id: I701e0cf505ca8ad99be7f83543fe5055b2f65dcc
Signed-off-by: Andreas Bomholtz <andreas@seluxit.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2078
Tested-by: jenkins
2015-02-11 22:05:22 +00:00
Angus Gratton 233f8859c0 nrf51 - Add async loader. Performance on nrf51822QAA/stlink-v2 from ~3.5KiB/s to ~19.5KiB/s.
Change-Id: Ib0bf41a0cec85f0bd5728551f8ad7f6255e4ea04
Signed-off-by: Angus Gratton <gus@projectgus.com>
[spamjunkeater@gmail.com: Cleanup buffer allocation, detect -1 for unknown pages]
Signed-off-by: Erdem U. Altunyurt <spamjunkeater@gmail.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2204
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-02-11 22:00:46 +00:00
Joerg Fischer fb9277191b J-Link serial number config option
Add serial option to jlink config commands, handy when there is more than one
adapter connected.

To select adapter 0123456 for OpenOCD, use

jlink serial 0123456

Change-Id: Ib29ce3f0c4975e1169211721a4531bf4db61f1ee
Signed-off-by: Joerg Fischer <turboj@gmx.de>
Reviewed-on: http://openocd.zylin.com/2521
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11 16:18:25 +00:00
Oleksij Rempel bcfb604618 tcl: add TP-LINK TL-MR3020 to the firmware recovery script
This adds the board to the list of supported devices for the easy
recovery procedure. Only ram_boot is supported for this target.

Change-Id: I144e1836f8b6257e96a42c98c2668da74ce243f6
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/2520
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
Reviewed-by: Andreas Färber <afaerber@suse.de>
2015-02-11 15:30:28 +00:00
Oleksij Rempel f59d2d9ecf tcl/target|board: add config Atheros ar9331
Add configs for Atheros ar9331 MIPS based WiSoC and
board based on this chip: TP-LINK TL-MR3020

Change-Id: I9e99719bce4bbb28311f6e9cddb32288db6e7b91
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/2519
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11 15:30:01 +00:00
Pawel Si b01952d78c mini51: support for Nuvoton NuMicro M051 series flash memory
adds flash support for Nuvoton M052, M054, M058, M0516 microcontrollers
into the mini51 driver, patch also adds support for programing LDROM,
flash data and flash config.

I've tested it on a M0516LBN microcontroller using an ST-LINK/V2:
1. removing security lock:
   openocd -f interface/stlink-v2.cfg  -f target/m051.cfg -c "init ; halt ; mini51 chip_erase; exit"
2. flashing:
   openocd -f interface/stlink-v2.cfg  -f target/m051.cfg -c "program file.hex"

Change-Id: I918bfbb42461279c216fb9c22272d77501a2f202
Signed-off-by: Pawel Si <stawel+openocd@gmail.com>
Reviewed-on: http://openocd.zylin.com/2426
Tested-by: jenkins
Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11 15:23:09 +00:00
Jacob Palsson 45a86f8e2a tcl/target: add CC2538 and CC26xx target files (with cJTAG procedure)
Added support for the Cortex-M3 based TI low power RF SoC CC2538 and
the CC26xx family.

These chips need a start sequence for switching from cJTAG to JTAG
before being used with OpenOCD, this is done in the tcl proc
ti_cjtag_to_4pin_jtag in the ti-cjtag.cfg config.

The configs for CC2538 and CC26xx run the start sequence on post-reset
event and set the ICEPick IDCODE in the data register for OpenOCD to
read, this is done so that every time OpenOCD resets the device, it
will enable JTAG.

Change-Id: I7db620211c0e7e03fad59d24fe31d23a9cdcfedc
Signed-off-by: Jacob Palsson <jaaacke@gmail.com>
Reviewed-on: http://openocd.zylin.com/2232
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-02-11 15:22:40 +00:00
Ed Beroset 18d6c0b02b em357: added target files for em357 and em358
This patch adds support for Silicon Labs (formerly Ember) EM357
and EM358 chips and derivatives.

Change-Id: Ie63aed95a2f4ef1a6b955e301a51b4de1b3a5462
Signed-off-by: Ed Beroset <beroset@ieee.org>
Reviewed-on: http://openocd.zylin.com/2470
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11 15:11:19 +00:00
Heinz Schweiger d7792a684e cfg: TI Tiva C dk-tm4c129x Evaluation Kits
New Texas Instruments Tiva C Series Boards
http://www.ti.com/tool/dk-tm4c129x

Change-Id: I44f96982e91786b977b3d29e0f4c7053d584a703
Signed-off-by: Heinz Schweiger <openocd@htl-steyr.ac.at>
Reviewed-on: http://openocd.zylin.com/1867
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11 15:09:49 +00:00
Tomas Vanek 1d7176f50b psoc4: support for Cypress PSoC 41xx/42xx family
New NOR flash driver was derived from stm32lx.
Procedure ocd_process_reset_inner is overriden in psoc4.cfg
to handle reset halt and system ROM peculiarities.

Change-Id: Ib835324412d106ad749e1351a8e18e6be34ca500
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/2282
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11 14:59:55 +00:00
Paul Fertser 873774992d flash/nor/stm32lx: use 0 base to autodetect second bank location
Change-Id: I3c296b3e276fcd4d92e4180fc0d2133eebfcc240
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2503
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-02-04 22:02:45 +00:00
Uwe Bonnes 5ffe5b9b2c Add more STM32F3 IDs in target/stm32f3.cfg.
Change-Id: I4c4462aa025639c4d20e6fa23c8845a69e60afc5
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2435
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-02-02 10:29:01 +00:00
Paul Fertser 5b6c29a457 tcl/target: add lpc8xx.cfg
This adds a trivial config for LPC8xx chips based on the already
existing infrastructure in lpc1xxx.cfg.

Change-Id: I7384df1f3c2e3e8ab767319728db5c4f8149480f
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2464
Tested-by: jenkins
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
2015-01-30 09:40:55 +00:00
Paul Fertser 101124c69a tcl/board: frdm kinetis boards have SRST connected
Change-Id: I1a56b5e9d1ac6466bba11cc694ee3eaa2c9b504f
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2462
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26 20:58:06 +00:00
Paul Fertser 064dc5daac tcl/target/stellaris: Snowflake supports SYSRESETREQ too
Change-Id: If4bf472ab8867c54a976bdb5803f7e4f79f350a8
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2461
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Ed Beroset <beroset@ieee.org>
2015-01-26 20:57:56 +00:00
Paul Fertser 38107ff966 tcl/target: consolidate Kinetis configs
Change-Id: I75fe6b239ff435f700459e7d7040616503fa458e
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2460
Reviewed-by: Andreas Färber <afaerber@suse.de>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26 20:57:41 +00:00
Thomas Eichinger 0d9ecc42d1 tcl/board: Add ST NUCLEO L152RE configuration
Added support for the ST nucleo l152re board with a stm32l152ret6 MCU,
analog to st_nucleo_f* configurations.

Change-Id: Id2c61dc7a7cb2e1cc64442191b367bab4247bdeb
Signed-off-by: Thomas Eichinger <eicht@lepus.uberspace.de>
Reviewed-on: http://openocd.zylin.com/2489
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26 20:55:03 +00:00
Paul Fertser a1bbf4b75b cfg: add srst_nogate to the supported targets, remove from board configs
It depends on the particular target whether it can work with SRST
asserted or not, so this belongs to the target config rather than the
board config.

Also, this allows for simple

openocd -f myboard.cfg -c "reset_config connect_assert_srst"

command to be used whenever a user feels a need to connect to an
unresponsive target.

Change-Id: I3d8da9ae47088fc0c75a20bfdd20074be1014de0
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2459
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26 20:54:51 +00:00
Uwe Bonnes 7dd50909e3 stm32f4/nucleo: Use only one configuration for all stm32f4 nucleo boards.
Change-Id: Ic3d0b47b19dae9cb09c11d24f16fea85a1b90c0b
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2397
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26 20:54:30 +00:00
Uwe Bonnes ded2b293f4 stm32f0/nucleo: Use only one configuration for all stm32f0 nucleo boards.
Change-Id: Ib2ddcd7a92c0d7ad503ef8e953f2bc304241a9f0
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2396
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26 20:54:21 +00:00
Karl Palsson 1663a17d9d target/stm32xx: Endian is not configurable.
So remove it from all the configs, it's misleading, and leads to cargo
culting of config files.

Change-Id: I2b77e60d5e96f9759c7c9fc91b20e73be2e95d9a
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2446
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15 23:26:18 +00:00
Paul Fertser 97012f080c tcl/interface/ftdi: add config for the IoT-LAB adapter
This is an integrated adapter used on the IoT-LAB boards.

Schematics are available from
https://github.com/iot-lab/iot-lab/wiki/Docs/openm3-schematics.pdf

Change-Id: I1c80e72653c3f319bb04d01e3dfddb1c2447c398
Tested-by: Quentin Lampin <quentin.lampin@orange.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2415
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15 23:22:31 +00:00
Andreas Färber 7ca77b090b tcl/board: Add TI TMDX570LS20SUSB board config
It is derived from ti_tmdx570ls31usb.cfg, using a different TAP ID.

Change-Id: I2d911995c76ea4f75a780cc230d61f4959825809
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2440
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15 23:21:41 +00:00
Karl Palsson 0ea9a66239 cfg: stm32l1: Use specific chipname
This should have been corrected earlier with the split of l1/l0 code
apart.

Change-Id: I87b94a310ae7e76318554a9cd2705348a942d58b
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2447
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15 23:20:44 +00:00
Spencer Oliver d1a67c80e4 cfg: fix lpc17xx regression
commit b5a6ba46 broke the following board files, update to new cfg.

Change-Id: Ic3b776bd32eb72eae6ad1e130e329268ce9ba71a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/2384
Tested-by: jenkins
2015-01-09 08:47:20 +00:00
Karl Palsson c3ec1940b5 stm32l: split l0/l1 support no jtag, different HSI settings
L0 is cortex m0+, so different id codes, SWD only, different addresses
for the clock speedup.  It has no endian options, no boundary scan.

Removed all L0 specific portions from L1 files, and renamed files to clarify
their purpose.  The deprecated stm32lx_stlink.cfg is kept as is, as it is only
around for backwards compatibility with prior releases.

Tested on STM32L053 Discovery and STM32L151 Discovery.

Has _not_ been tested with jtag on L1.

Change-Id: I8eea890d2f92a302d9e9c8a8832d218ee1b6bcfc
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2405
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Juha Niskanen <juha.niskanen@haltian.com>
2014-12-03 09:10:21 +00:00
Juha Niskanen 12b41a3409 stm32: Fix L0/1xx CPUTAPID setting and add new L1xx BSTAPIDs
Fix script parse error, when using JTAG, introduced in
commit 0187ced9ed

Add several BS TAPIDs with comments about ST documentation.

Change-Id: I8d0370b244ccaf7ea0dbe1919bfad1915f7317d4
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
Reviewed-on: http://openocd.zylin.com/2376
Tested-by: jenkins
Reviewed-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-12-03 09:07:54 +00:00
Uwe Bonnes 9c4d294654 tcl/target/stm32f4: ramp up JTAG speed, HSI is 16MHz there
Since all F4 parts have an internal HSI providing 16MHz, it's safe to
use 2MHz JTAG frequency by default.

Change-Id: I2702d5a1d642d4acd4af2db54c028949132c6900
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2383
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24 22:28:10 +00:00
Uwe Bonnes 41a968ec05 tcl/target/stm32f4x: add F401 and F411 IDs
Change-Id: I12079586dafb8a7614bdf4cc0b13cd5030301742
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2379
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24 22:27:52 +00:00
Paul Fertser cbb797bdcc tcl/interface/ftdi/swd-resistor-hack: clarify and add schematic diagram
Change-Id: I8600ee983de85e4225430ae508a50cd938122d89
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2357
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-11-02 18:04:14 +00:00
Spencer Oliver 885f438814 cmsis-dap: add serial number support
Change-Id: I66926d1013e2b3a43ce0d18d3599771428706b6a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/2329
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-10-16 12:30:50 +00:00
Spencer Oliver 1ea25b85bb cfg: remove incorrect execute permissions
Change-Id: I0ba9dfdf876bc99df4e2d1f1f3bc0c9ccc6c98c2
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/2333
2014-10-06 18:56:14 +00:00
Rémi PRUD'HOMME b55ca1ad27 stm32: Add config file for a new board STM32L052 dsicovery
this board use STLink-V2-1, the STM32L1xx use the STLink-V2.

Change-Id: Ie58f45affcb1e9a6fed711b48c3c03b5035ab2b2
Signed-off-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com>
Reviewed-on: http://openocd.zylin.com/2317
Tested-by: jenkins
Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-10-06 18:41:24 +00:00
Rémi PRUD'HOMME 0187ced9ed stm32: add L0xx CPUTAPID
Add CPUTAPID for stm32 L0xx mcu devices. Using -expected-id to
add the new id with the id for L1xx devices. This for reduce the
duplicated code.

Change-Id: I48bd230884ecf38fa200c620b547bdf3b5f59132
Signed-off-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com>
Reviewed-on: http://openocd.zylin.com/2315
Tested-by: jenkins
Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-10-06 18:41:20 +00:00
Paul Fertser 44394c2a77 interface/ftdi/olimex-arm-usb-ocd-h: fix nTRST control definition
According to my inspection of an Olimex ARM-USB-OCD-H adapter ACBUS0
is connected directly to an SN74LVC2T45 buffer input B2, and the
corresponding output A2 is connected directly to the JTAG
connector. It seems the information in the Olimex flyer is incorrect
for the -H version and TRST can't be tri-stated, ACBUS2 is unused.

The older ARM-USB-OCD device has SN74AC244 for an output buffer and
ACBUS2 controls its !2OE, ACBUS0 connected to 2A1 (2Y1 is nTRST), in
accordance with the information flyer.

Change-Id: I22828b7b959b6f62c3f51367feb8fab9705641e5
Reported-by: Tim Sander <tim@krieglstein.org>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2286
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Tim Sander <tim@krieglstein.org>
2014-10-06 11:59:48 +00:00
Karl Palsson 54ff07808f tcl/board: add TI Tiva C ek-tm4c1294xl config
Change-Id: Iab070fe4c0f03ecc0db035b16dfb64105b0841be
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2063
Tested-by: jenkins
2014-09-29 20:04:30 +00:00
Andreas Fritiofson 1c021ed0af target: Remove "-variant" argument
Remove this underutilized feature. Despite the fact that a lot of configs
specifies a arbitrary "variant", only the xscale target actually defines
any.

In the case of xscale, the use of -variant is dubious since

1) it's used as a redundant irlen specifier,
2) it carries a comment that it doesn't really need it and
3) only two xscale configs even specify it.

If there's a future target that needs a variant set, a target specific
option could be added when needed.

Change-Id: I1ba25a946f0d80872cbd96ddcc48f92695c4ae20
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2283
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-09-22 19:39:24 +00:00
Austin Phillips 7568a91c8e Support hla_serial command for ST-LINK adapters.
The hla_serial command allows for a programming device serial number to be
specified in addition to USB VID/PID.  This allows for multiple ST-LINK/V2
programmers to be attached to a single machine and operated using openocd.

Change-Id: I350654bf676eb26ba3a90450acfa55d2a5d2d791
Signed-off-by: Austin Phillips <austin_phillips@hotmail.com>
Reviewed-on: http://openocd.zylin.com/2198
Tested-by: jenkins
Reviewed-by: Martin Glunz <mg@wunderkis.de>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-09-22 19:36:05 +00:00
Nemui Trinomius 910972fcec cfg: Added Nucleo-F411RE board config.
It supports STLink/V2-1 debug adapter.

Change-Id: Ifbc610cd68ec929608369e69d0b1395fe04956cd
Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-on: http://openocd.zylin.com/2259
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-09-15 08:21:05 +00:00
Paul Fertser 1f4b0190e8 tcl/board/sheevaplug: add adapter_khz setting
This combination is known to work properly with 2MHz JTAG clock.

Change-Id: Ie5ec3d3b415efbb13faee7d34e0c7f862b78350c
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2266
Tested-by: jenkins
2014-09-15 08:20:05 +00:00
Paul Fertser eab9af185e tcl/interface/ftdi/sheevaplug: fix device description
Without this SheevaPlug debugging interface can't be matched.

Change-Id: Ifca149130d03c1aa165ed1123e8540e49485f023
Reported-by: Andreas Schneider <schneider.andi@gmail.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2265
Tested-by: jenkins
2014-09-11 21:35:00 +00:00
Vanya Sergeev b5a6ba46aa cfg: refactor lpc1xxx targets onto one base config
Since now auto-detection for flash size works nicely, there's no
reason to keep numerous configs around.

Change-Id: If0cbc37985abf17ef7c1f7d0688e76500fac228f
Signed-off-by: Vanya Sergeev <vsergeev@gmail.com>
Reviewed-on: http://openocd.zylin.com/1960
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-09-08 23:05:08 +00:00
Бурага Александр 1e439e2a9a tcl/target: add config for К1879ХБ1Я, a hybrid ARM11/DSP SoC by RC Module
This adds config to allow JTAG debugging of an ARM core of a modern
hybrid SoC by Research Centre "Module"
(http://www.module.ru/en/company/). К1879ХБ1Я is targetted at set-top
boxes and other multimedia equipment, the official SDK is Linux-based.

Change-Id: Ib2ae5784d25699f952682e66b025a3f677a76d5d
Signed-off-by: Бурага Александр <dtp-avb@yandex.ru>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2272
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-09-08 22:26:35 +00:00
Paul Fertser 28b0019803 tcl/interface/ftdi: fix TRST for Olimex TINY adapters
According to the research by Eldar, TINY-H adapter has nTRST connected
to ACBUS0 directly via a 100 Ohms series resistor. I think it's safe
to assume the older TINY adapter does the same.

See high-res photos at [1].

This patch should fix issues with JTAG for the case when nTRST is
actually connected but is missing from the config.

[1] https://wikidevi.com/wiki/Olimex_ARM-USB-TINY-H

Change-Id: Iaaee7be30536ebb502802d38b82cd9573408f854
Reported-by: Хайруллин Эльдар <eldar.khayrullin@mail.ru>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2247
Tested-by: jenkins
Reviewed-by: demokmail <demokmail@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-09-08 21:15:33 +00:00
Paul Fertser 804aee7702 tcl/interface/ftdi: add kt-link config (with SWD) for DP BusBlaster
Change-Id: Icbeca8c0c3845c0b777fb2e4c81b17e7b7cc5ff8
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2269
Tested-by: jenkins
Reviewed-by: Ben Gamari <bgamari@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-09-08 20:27:16 +00:00
Paul Fertser b171c7ab16 tcl/target/imx6: add yet another SJC tapid
This is for mx6q TO1.1.

Change-Id: Id6af2ed232fc19be9bf49eb6d2df0004c6668698
Reported-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2253
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-09-08 20:21:37 +00:00
Paul Fertser 8390f71428 tcl/interface/ftdi: auto-select SWD from converters' configs
When you source a JTAG-SWD converter config, any other transport
doesn't make any sense, so just autoselect it right there.

Change-Id: I6c098740905a0d4007473fc19cc07e11cbcc9369
Suggested-by: Хайруллин Эльдар <eldar.khayrullin@mail.ru>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2248
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Eldar Khayrullin <eldar.khayrullin@mail.ru>
2014-08-19 20:19:40 +00:00
Eldar Khayrullin 877b8434cd tcl/board/stm32ldiscovery: fix breakage
Change-Id: I450ea82c27009be6bad6a7814969d81964ff44d8
Signed-off-by: Eldar Khayrullin <eldar.khayrullin@mail.ru>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2255
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-08-19 20:18:54 +00:00
Andrey Smirnov 5587013ad6 tcl/board: Add board configuration for nRF51822-mKIT
Add board configuration for Nordic's nRF51822-mKIT devkit, available
here:
http://mbed.org/platforms/Nordic-nRF51822/

Change-Id: Ib9329307147b1e7be061a5060b4eec8256fe2bd4
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[gus@projectgus.com: Minor tweaks, model number]
Signed-off-by: Angus Gratton <gus@projectgus.com>
Reviewed-on: http://openocd.zylin.com/2116
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-11 22:37:11 +00:00
Angus Gratton 6d26e3e768 nRF51822: Add workaround for PAN-16 where not all RAM blocks reliably enabled on reset
According to Nordic Semiconductor Product Anomaly Notice (document
NRF51822-PAN), item 16, some revisions of nRF51822 sometimes reset
without all RAM blocks enabled. This was noted on NRF51822-QFAA rev
CA/C0, only 8KiB of memory was accessible.

This patch turns on all RAM following a debugger induced reset
(matches specified behaviour.)

Change-Id: I4f8be4ec3d1271da7fe5bc9a084fdcb2968535bb
Signed-off-by: Angus Gratton <gus@projectgus.com>
Reviewed-on: http://openocd.zylin.com/2202
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-11 22:26:44 +00:00
Andrey Skvortsov 4949757473 tcl/target: added support for TI OMAP/AM 3505 and 3517
added TAPID for OMAP/AM 3505 and 3517. Tested on TAM3517 Twister board
with AM3517 SoC.

Change-Id: I78a3268a4adb18092c694a556538c99c9032f648
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Reviewed-on: http://openocd.zylin.com/2127
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-11 21:27:21 +00:00
Paul Fertser c7384117c6 Allow transports to override the selected target (hla configs unification)
This should allow to share common configs for both regular access and
high-level adapters.

Use the newly-added functionality in stlink and icdi drivers, amend
the configs accordingly.

Runtime-tested with a TI tm4c123g board.

Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
[gus@projectgus.com: context-specific deprecation warnings]
Signed-off-by: Angus Gratton <gus@projectgus.com>
[andrew.smirnov@gmail.com: additional nrf51.cfg mods]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1664
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-11 21:25:56 +00:00
Andreas Fritiofson e1bc7f4545 interface/ftdi: Mark flyswatter.cfg as tested
- Flyswatter + Proxmark3 (Atmel AT91SAM7S256) - works
- Flyswatter + Tiva Launchpad (EK-TM4C123GXL) - works

Change-Id: I615e0ff9262be6ae1064fb2de8e6e810775e7db4
Tested-by: Ondrej Mikle <ondrej.mikle@nic.cz>
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2237
Tested-by: jenkins
2014-08-04 11:09:48 +00:00
Paul Fertser e2b1f06f93 tcl/board: fix all the remaining boards that were sourcing ft2232 configs
This was reported in
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=751372 .

Change-Id: I258f3d40593ff2966ce3ca61c13a23699d1b162f
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2230
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-02 09:04:19 +00:00
Fredrik Hederstierna e03eb89cfb tcl/board: add STM32429I-EVAL and STM32439I-EVAL dev boards from ST.
Change-Id: I304b6e7bae832391f11d53003299d68e31b0e4ef
Signed-off-by: Fredrik Hederstierna <fredrik@hederstierna.com>
Reviewed-on: http://openocd.zylin.com/2171
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-07-10 21:19:35 +00:00
Paul Fertser 333df54fb7 tcl/target/stm32l: restore slow clock on reset
Change-Id: I63eafaa38b188fe50c13ab966be44a3eaa2006b0
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2188
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-07-10 21:18:45 +00:00
Thomas Schmid 48d2431968 Adding support for the Atmel SAMR21.
The Atmel SAMR21 is a Atmel SAMD21 with an Atmel RF233 in one package (two
dies). Tested with the SAMR21 Xplained Pro eval kit.

Change-Id: I1d79ea05834b925d7ec810527206fe86854e684b
Signed-off-by: Thomas Schmid <thomas@rfranging.com>
Reviewed-on: http://openocd.zylin.com/2194
Tested-by: jenkins
Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-07-10 21:18:30 +00:00
Andreas Fritiofson 518ce9e19e cfg: Rename leftover cortex_a8 -> cortex_a
Change-Id: Id11d89ae2fb78854da4284afb7f14d8a892a2e49
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2197
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-07-08 19:33:18 +00:00
Spencer Oliver eeff8eec6c cfg: add SWD configs for stellaris ftdi based adapters
Tested on hardware.

Change-Id: Ib0191e97988dc79e9a62da74bd7fe25f548ff5a2
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/2185
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
2014-06-28 09:37:14 +00:00
Paul Fertser e2a7990aac tcl/interface/ftdi: add SWD configs for kt-link, olimex, rowley and resistor hack
Resistor hack is runtime-tested, other configs are based on
schematics.

Change-Id: I8daffa0434cd41d142fbec7c230a302284f7aa31
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2184
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-06-28 09:37:05 +00:00
Paul Fertser bf96df255e jtag/drivers/ftdi: require defining SWD_EN signal for SWD mode
Use a special signal instead of a dedicated swd mask. Amend
jtag-lock-pick_tiny_2 config accordingly.

Change-Id: Ifb007a0b5434b590c52f936efd5f5458e913e2e4
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2183
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins
2014-06-28 09:36:53 +00:00
Paul Fertser 335bafbb25 Auto-select JTAG transport when appropriate
I looked through all the target configs after stripping comments and
such from them with sed to see what jtag-specific commands can appear
first, and it looks like all the meaningful combinations should be
covered.

Change-Id: I8d543407b7f4ac8aca7354ecd50e841c8a04d5f3
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2179
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-28 09:35:38 +00:00
Andreas Fritiofson baf998b9f8 cfg: Add SWD support to JTAG-lock-pick Tiny 2
Change-Id: I61eac507fa6861b7daf603ebca58e8bf3cc699c1
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2136
Tested-by: jenkins
Reviewed-by: Jens Bauer <jens@gpio.dk>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-28 09:34:39 +00:00
Andrey Smirnov ccf4d6d648 cortex_m: Do additional initialization during reset
SAM4L requires additional steps to be taken right after SYSRESETREQ is
issued in order to function robustly:

       - CMSIS-DAP DAP driver needs to explicitly check for sticky bit
         errors since it is possible for adapter to perform successful
         write opration, report no errors and then, under the hood, do
         some other things that will result in sticky bit being set.

       - Debugger needs to wait for security system to finish
         intialization and assert CDBGPWRUPACK before proceeding

This change is related to commit http://openocd.zylin.com/#/c/1995/

Change-Id: I741c95a809bfd60d930cec9482239e4796a62326
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-on: http://openocd.zylin.com/2088
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com>
2014-06-28 09:30:09 +00:00
Paul Fertser f8a6a07149 tcl: introduce using_(jtag|swd|hla) helpers and use them in reset handler
Barely tested with plain SWD transport.

Change-Id: I48b59136bf4294ffed737dba01f1b30ef83aa86b
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2003
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-28 09:28:12 +00:00
Paul Fertser 8878673aa9 tcl/target/fm3.cfg: use a CHIPNAME known by the flash driver
fm3 flash driver needs to know which chip variant is used.

This fixes "unknown fm3 variant: mb9bf500.cpu" error if the config is
used as is.

Change-Id: I500fcfb413f23ee246678cec5bd19d14139a28e2
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2160
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22 08:45:51 +00:00
Franck Jullien 712165f483 openrisc: add support for JTAG Serial Port
Change-Id: I623a8c74bcca2edb5f996b69c02d73a6f67b7d34
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/2162
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22 08:39:08 +00:00
Tom Rini f9e82f3ffb tcl/target/am335x.cfg: Drop gdb-attach stanza
This isn't needed nor a recommended practice now, was a simple
copy/paste from amdm37x.cfg anyhow.

Change-Id: I064226dc859d7563cfad945b577279fc37448645
Signed-off-by: Tom Rini <trini@ti.com>
Reviewed-on: http://openocd.zylin.com/2068
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-22 08:30:39 +00:00
Nemui Trinomius a0e37fe2c0 cfg: Added Nucleo-F334R8 board config.
It supports STLink/V2-1.

Change-Id: I0a8c01247a7a0165321818ca222479e3ae67ce5c
Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-on: http://openocd.zylin.com/2175
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-19 21:59:30 +00:00
Marco Cruz bbc2f13f33 tcl/board: add Atmel SAM4E-EK
Change-Id: I07d7e0528ed4e88b070ba4e7598a193ec8e9e37d
Signed-off-by: Marco Cruz <marco.caratuva@gmail.com>
Reviewed-on: http://openocd.zylin.com/2158
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-18 20:27:10 +00:00
Paul Fertser c8c10f77dc tcl/target/kl25.cfg: add maximum speed specification
Maximum frequency wasn't tested on hardware but the docs seem to be
quite explicit and do not mention any restrictions for that.

Change-Id: Idcf58df5358d06525e683f07c76eedad8f0b292d
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2120
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01 18:31:42 +00:00
Paul Fertser 76a765adbc tcl: add ASUS RT-N66U config
CFI flashing verified with real hardware. RAM configuration wasn't
attempted.

Change-Id: I9185ab71430d799793befef708a15f62edba1663
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2153
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01 18:27:09 +00:00
Yegor Yefremov 1a06fc6047 KS869x: add new target
This patch adds Micrel's KS869x target. The configuration was taken from
http://www.mmnt.net/db/0/0/www.micrel.com/ethernet/8695 - Micrel's
FTP server i.e. their OpenOCD 7.0 package.

The only change compared to the original file is the removal of
reset configuration, as it belongs to the board configuration.

Change-Id: Ic8509aa5fe5ce3166a3129e1c055280a3b2b9312
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-on: http://openocd.zylin.com/2125
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-16 07:10:04 +00:00
Andrey Smirnov 46101959a6 kinetis: Revise CPU un-securing code
Old version of the code had several problems, among them are:
 * Located in a generic ADI source file instead of some Kinetis
   specific location
 * Incorrect MCU detection code that would read generic ARM ID
   registers
 * Presence of SRST line was mandatory
 * There didn't seem to be any place where after SRST line assertion
   it would be de-asserted.
 * Reset was asserted after waiting for "Flash Controller Ready" bit
   to be set, which contradicts official programming guide AN4835
 * Mass erase algorithm implemented by that code was very strange:
   ** After mass erase was initiated instead of just polling for the
      state of "Mass Erase Acknowledged" bit the code would repeatedly
      initiate mass erase AND poll the state of the "Mass Erase
      Acknowledged"
   ** Instead of just polling for the state of "Flash Mass Erase in
      Progress"(bit 0 in Control register) to wait for the end of the
      mass erase operation the code would: write 0 to Control
      register, read out Status register ignoring the result and then
      read Control register again and see if it is zero.
 * dap_syssec_kinetis_mdmap assumed that previously selected(before
   it was called) AP was 0.

This commit moves all of the code to kinetis flash driver and
introduces three new commands:

o "kinetis mdm check_security" -- the intent of that function is to be used as
  'examine-end' hook for any Kinetis target that has that kind of
  JTAG/SWD security mechanism.

o "kinetis mdm mass_erase""  -- This function removes secure status from
  MCU be performing special version of flash mass erase.

o "kinetis mdm test_securing" -- Function that allows to test securing
  fucntionality. All it does is erase the page with flash security settings thus
  making MCU 'secured'.

New version of the code implements the algorithms specified in AN4835
"Production Flash Programming Best Practices for Kinetis K-
and L-series MCUs", specifically sections 4.1.1 and 4.2.1.
It also adds KL26 MCU to the list of devices for which this security
check is performed. Implementing that algorithm also allowed to simplify
mass command in kinetis driver, since we no longer need to write security
bytes. The result that the old version of mass erase code can now be
acheived using 'kinetis mdm mass_erase'

Tested on accidentally locked FRDM-KL26Z with KL26 Kinetis MCU.

Change-Id: Ic085195edfd963dda9d3d4d8acd1e40cc366b16b
Signed-off-by: Andrey Smrinov <andrew.smirnov@gmail.com>
Reviewed-on: http://openocd.zylin.com/2034
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-05-10 09:15:35 +00:00
Andrey Smirnov d92a2ac330 generalplus: Add configuration file for General Plus GP326XXXA series
Add configuration file for General Plus GP326XXXA series. Tested on
GP326833A on GPC-1737B board.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Change-Id: I1ad0e22598b01317bbc823870a7a262e9192c595
Reviewed-on: http://openocd.zylin.com/2058
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-05-05 20:23:45 +00:00
Ash Charles 66c6665288 Add support for Gumstix AeroCore device
The Gumstix AeroCore board [1] contains a STM32F427 microcontroller.
Schematics for this board will also be made available [2].
The JTAG interface for this chip can be accessed via a USB connection
provided by an FTDI chip (0403:6011).

[1] https://store.gumstix.com/index.php/products/585/
[2] https://pubs.gumstix.com/boards/AEROCORE

Change-Id: I0bf3bb525f51528bedd807b1f7210b09ef2e1015
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Reviewed-on: http://openocd.zylin.com/2117
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-05-05 20:14:30 +00:00
Seth LaForge 3427cf2b7e cortex_a: fix endiannes issues on TI TMS570
The TI TMS470 and TMS570 series of processors are BE-32 processors,
despite BE-32 not being supported by ARM in the Cortex-R4 core. TI
hacked in BE-32 support, which requires odd swizzling in OpenOCD to
make memory reads and writes function correctly. In particular,
without this change, OpenOCD word reads and writes had the bytes
reversed, and halfword and byte packed reads were reading garbage.
In my testing, this change fixes these problems.

Change-Id: I21dd30f4b9003f20fcc85f674ab833407bb61f74
Signed-off-by: Seth LaForge <sethml@google.com>
Reviewed-on: http://openocd.zylin.com/2064
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-04-14 18:20:36 +00:00
Lee Bowyer 47830f0ebf tcl: bcm6348 target config, BT HomeHub v1 board config
Also add the board to the firmware recovery script.

Change-Id: I4f9c895dae171df7249e3b1c0563b288518b9fe0
Signed-off-by: Lee Bowyer <lee@sodnpoo.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2097
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-04-14 18:15:24 +00:00
Paul Fertser de9ebc5ce6 tcl/target: make milandr configs swd-compatible
Change-Id: Ibb34f0d7829b205341bcce511ffc2624bdfe2c75
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1962
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29 08:07:16 +00:00
Andrey Smirnov ba66b4c594 nrf51: Add UICR writing support
SoftDevice stack ihex binary, provided by Nordic expects being able to
write data necessary for its correct operation at the adresses inside UICR.
This patch exposes UICR region of flash as a second bank on the MCU to
facilitate that.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Change-Id: Idbc140b8de027f60655f78043877b7c054eb06f9
Reviewed-on: http://openocd.zylin.com/2013
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29 07:25:21 +00:00
Franck Jullien 3c954fbd89 cfg: or1k_generic: allow TAP_TYPE override
This patch allows users to specify TAP_TYPE from
the command line when using or1k_generic.cfg.

Change-Id: I9f4b7d8e4867658fa34bb4e92fc3a5f25227df11
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/2056
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-29 07:19:09 +00:00
Tim Sander 91a36fcf0a tcl: add Zynq-7000 target and Zedboard board configs
Change-Id: Ia7f2a57d1b32dda9936ad87e22635f7749ff3ce1
Signed-off-by: Tim Sander <tim@krieglstein.org>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2061
Tested-by: jenkins
2014-03-29 07:16:00 +00:00
Felipe Balbi 058163e32e cfg: add TI am43xx devices
This adds support for the am43xx SoC and the AM437x GP EVM and AM438x
ePOS EVM.

Change-Id: I09cbb09072f38e0e08fdd520dedb6e67d45056be
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
Reviewed-on: http://openocd.zylin.com/2047
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29 07:00:22 +00:00
Jens Hoffmann 075c3f8fe2 cfg: Added st nucleo board configs.
This patch adds board configs for Nucleo FXXX boards.

Change-Id: I25bfd7d63f734bad710917efa67bc6096aa60ef8
Signed-off-by: Jens Hoffmann <jehoffma@gmail.com>
Reviewed-on: http://openocd.zylin.com/2022
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17 17:05:37 +00:00
Felipe Balbi 3201a104fe tcl: target: icepick: add icepick_d_tapenable procedure
instead of replicating icepick_d_tapenable in many of TI's newer
platforms, we can move to icepick.cfg and just call it from board TCL
configuration file.  This is similar to the C but has a few changes we
need to make.

Change-Id: I0ab48005ccd66cd5b67b919fb5e3b462288f211d
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
Reviewed-on: http://openocd.zylin.com/2030
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-17 12:53:02 +00:00
Paul Fertser 8d89373596 tcl/interface/ftdi: add Digilent JTAG-SMT2 config
Tested on ZedBoard by Tim Sander.

Change-Id: I4316d9b4d36f01bbe91a46c78ea8bca22efb1a5a
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2029
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17 12:51:19 +00:00
Spencer Oliver 0694bc652d cfg: change default SAM4L cortex_m reset_config
From testing this target does not seem to support using SYSRESETREQ, change
the default to the safe VECTRESET.

This target also has other reset issues (srst not working) that will be
addressed in another patch.

Change-Id: Icfc78347dc71aa3a062ddea63190a818d7fbc760
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1995
Tested-by: jenkins
Reviewed-by: Angus Gratton <gus@projectgus.com>
2014-03-17 12:50:17 +00:00
Jörg Wunsch 122ec5fbe2 Make the Atmel SAM3 family SWD-aware
Atmel's SAM3 and SAM4 processor families are very close to each other
in many respects.  However, so far, only the SAM4 target script
contained the magic to allow using SWD, while SAM3 was tied to JTAG
only.  This e.g. prevented the CMSIS-DAP driver from accessing SAM3
devices as it only uses SWD transport (by now).

The patch pulls all the things from the SAM4 target script that are
also applicable to SAM3 devices.  With the patch, an Atmel CMSIS-DAP
debugger (Atmel-ICE) was proven to be able to successfully attach to a
SAM3S-EK evaluation kit.  I also cross-checked that accessing through
a SAM-ICE (Segger J-Link) still works with the patch.

Change-Id: I20dafbff8e1e9f967da950e48a56205586eeef8d
Signed-off-by: Jörg Wunsch <openocd@uriah.heep.sax.de>
Reviewed-on: http://openocd.zylin.com/2046
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17 12:49:32 +00:00
Paul Fertser ae806d8f4e tcl/board: add config for DP Bus Blaster reconfiguration
Reported and tested by Gracana on IRC.

Change-Id: If0524d2d627d566e8b5e1d00784dd7556f44b125
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2036
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-17 12:44:19 +00:00
Bartosz Bielawski 4c9d6038b2 stlink_usb.c: add support for STLink V2-1
The new version of STLink (V2-1) has a different USB endpoint layout.
As the PID of the device also changed it's possible to change EPs used
by OpenOCD in runtime. The patch adds three new fields to stlink_usb_handle_s
and assigns right EP numbers in stlink_usb_open().
Parts of the code inspired by and used with consent of Jens Hoffmann.

Change-Id: I93b69fb889f15317e9bf864905f435905db39745
Signed-off-by: Bartosz Bielawski <bartosz.bielawski@gmail.com>
Reviewed-on: http://openocd.zylin.com/2019
Tested-by: jenkins
Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17 12:41:57 +00:00
Tim Kryger f91390f538 bcm281xx: Add bcm281xx SoC and bcm28155_ap board
Add support for Broadcom's dual A9 mobile SoC and its reference board.

Change-Id: Ia145b120043bddc89c44726066023154ae390788
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-on: http://openocd.zylin.com/1926
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-09 22:33:32 +00:00
Tom Rini bbf26e886a interface/ftdi/xds100v2.cfg: Add another VID/PID, drop desc
The XDS100v2 is often embedded in a number of platforms using the
VID/PID of 0x0403/0x6010 and a generic FTDI device description.  Add
this VID/PID combination and remove the description line.

Change-Id: I370e6199ac24f802426e9541e19ee38f18f1209a
Signed-off-by: Tom Rini <trini@ti.com>
Reviewed-on: http://openocd.zylin.com/2016
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-09 19:44:39 +00:00
Tom Rini 36cbcb0cc9 cfg: Switch ti_beaglebone to new ftdi interface
Tested on Beagelbone White.

Change-Id: I544d7c1ba21a6bd594c0a1c4a9611639fa3c320d
Signed-off-by: Tom Rini <trini@ti.com>
Reviewed-on: http://openocd.zylin.com/2017
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-07 19:42:19 +00:00
Andrey Yurovsky 8e44a9663d Add support for the Atmel SAMG53
flash: at91sam4: add support for the SAMG53 family (this also covers the
SAMG51).  The SAMG5x parts have an EEFC (enhanced embedded flash controller)
which seems to be identical to the EFC that the sam4 driver supports.

Add a script for the Xplained Pro G53 board, this has the onboard CMSIS-DAP
debugger and a SAMG53N19.  Tested on this board and chip combination.

Change-Id: I12af50402cd2069b3c7380d92e6fe54816d6c045
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1974
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-04 20:18:37 +00:00
Andrey Smirnov 7e4fb97559 nrf51: Implement the support for Nordic's nRF51 devices
Add support for Nordic's nRF51 chip series. Tested with nRF51822.

Change-Id: Id70f6fd76888cc595a353aefb84d25c4cd325d7d
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1945
Tested-by: jenkins
Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-24 12:09:04 +00:00
Fatih Aşıcı 12b34414db cfg: Make stm32f4x usable with SWD transport
Change-Id: Ib8f3b414ec3c31cf8a112e75efe003e2237c59bb
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1951
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
2014-02-24 11:56:29 +00:00
Adrian Burns 1338cf60b9 quark_x10xx: add new target quark_x10xx
Intel Quark X10xx SoC debug support added
Lakemont version 1 (LMT1) is the x86 core in Quark X10xx SoC
Generic x86 32-bit code is in x86_32_common.c/h

Change-Id: If2bf77275cd0277a82558cd9895b4c66155cf368
Signed-off-by: adrian.burns@intel.com
Reviewed-on: http://openocd.zylin.com/1829
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-02-11 13:07:29 +00:00
Paul Fertser c83801d1fc interface/ftdi/xds100v2.cfg: default to reset state and ask user to release it later
This adapter is special and needs a reset sequence to be performed
before operation. Since there're no suitable hooks to do that, we have
no choice but to ask the user to manually add the necessary commands
to his or her config file.

Change-Id: I48fb4276e77529768266840221b68c3ae26801e1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1884
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-02-11 13:04:06 +00:00
Paul Fertser 698eaf9896 interface/ftdi: add TUMPA Lite config
TUMPA Lite is a cheap FT232H-based breakout board, without any
buffering. It also lacks series resistors so for some targets
(especially when not using ridiculously short wires) one needs to add
about 47 Ohms in series on every high-speed line.

The SRST line is connected directly to the FT232H too.

Real-life tested (including SRST and TRST).

Change-Id: I5ed4f88d8d20384e9c52efe2ff0c290e2650d43e
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1918
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-04 20:52:26 +00:00
Spencer Oliver ebb71eb291 cfg: LPC17xx default to using SYSRESETREQ to reset target
Originally the LPC17xx user guide (UM10360 Rev 2) stated that SYSRESETREQ
was not supported, so this was the default cortex_m reset mode.

Rev 3 of the same user guide states that it is now supported.
This has been verified on a LPC1768 mbed platform, previously I have not
tested this functionality.

Change-Id: I4858248903981a1c93ce75016e67c9e02702fcc5
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1892
Tested-by: jenkins
Reviewed-by: Jörg Fischer <turboj@gmx.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-01-29 13:20:02 +00:00
Franck Jullien 87e91f4db9 jtag/drivers: add USB-Blaster II
This patchs adds a new access driver for the existing
USB-Blaster interface driver.

This interface (as it is build-in on the sockit development
board) is composed of a Cypress EZ-USB plus a CPLD.

The Cypress chip as an embedded 8051 microcontroller.
When it's powered up, the firmware is downloaded to the
chip then the device is disconnected and reconnected with
the new firmware.

The USB-Blaster II protocol is almost identicial to
the old one. The only difference is that you need to
send a 0x5F before read TDO back. This command
seems to copy TDO buffer datas to the endpoint buffer.

Driver will be auto enabled if libusb-1.0 is detected.

Change-Id: I562a720a68cb4dcabeab791947d5d38776cb70fa
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/1791
Tested-by: jenkins
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-20 13:28:02 +00:00
Spencer Oliver e18c958e82 cfg: add Freescale FRDM-KL46Z Board
Change-Id: Ib585728f13a380eeeb2ada095f3e1a1c2aaf44cb
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1866
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-01-20 13:26:50 +00:00
Andrey Yurovsky 32eea3f68e Atmel samd: add support for SAMD21
Tested with SAMD21J18A on the SAMD21 Xplained Pro board.

Change-Id: Ice9ebcd229ed038b3193baf92d910f9256d7ce91
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1873
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-15 11:38:25 +00:00
Andrey Yurovsky 215c41c017 add support for Atmel SAMD NOR Flash
This adds a new NOR Flash driver, "at91samd", which supports the
built-in Flash on Atmel's D-series Cortex M MCUs, starting with the D20.
Parts and their geometry are detected automatically using the DSU and
lookup schemes described in the D20 document, 42129F–SAM–10/2013.
Future D-series variants and families should presumably use this
controller as well (possibly with minor changes and improvements).

Tested on the SAMD20 Xplained Pro board, for which we also add the
corresponding Flash configuration.

Change-Id: Id8d3dd601e9f53121682d1a1190d0be4ea3b83eb
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1684
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09 15:23:27 +00:00
Andrey Yurovsky 9cabe333e1 add support for Atmel SAM4L NOR Flash
This adds a new NOR Flash driver, "at91sam4l", which supports the
built-in Flash on Atmel's low-power SAM4L family of Cortex M4 MCUs.
Parts and their geometry are detected automatically using the Chip ID
and lookup schemes described in document 42023E–SAM–07/2013.

Tested on AT91SAM4LC4CA via the SAM4L XPlained Pro development kit.

Change-Id: If73499dee92cc8ce231845244ea25c6984f6cecd
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1639
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09 15:23:15 +00:00
Spencer Oliver 67f664a068 cfg: add initial Atmel xplained kit support
These kits feature a CMSIS-DAP compliant debugger and so have been added
as part of the pending support.

Currently the flash drivers for the L8 and D20 are wip.

One issue this implementation of CMSIS-DAP raised is that it supports
512byte HID reports, however using the current HIDAPI we have no cross platform
way of querying this info. Long term we plan to add this support to HIDAPI.

Change-Id: Ie8b7c871f58a099d963cd71a9f8a0105a38784e9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1625
Tested-by: jenkins
2014-01-09 15:22:56 +00:00
Spencer Oliver acc4bb83fd cfg: add stm32 cmsis-dap compliant config
Change-Id: I3cfb21fdcef830e22b03bf4b5d58993728cc7475
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1543
Tested-by: jenkins
2014-01-09 15:22:42 +00:00
Spencer Oliver 4dc8cd201c cmsis-dap: add initial cmsis-dap support
This is based on work from:
https://github.com/TheShed/OpenOCD-CMSIS-DAP/tree/cmsis-dap

Main changes include moving over to using HIDAPI rather than libusb-1.0
and cleaning up to merge into master. Support for reset using srst has
also been added.

It has been tested on all the mbed boards as well as the Freedom board
from Freescale. These boards only implement SWD mode, however JTAG mode
has been tested with a Keil ULINK2 and a stm32 target - but requires a lot
more work.

Change-Id: I96d5ee1993bc9c0526219ab754c5aad3b55d812d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1542
Tested-by: jenkins
2014-01-09 15:20:51 +00:00
Paul Fertser 416e79e24a tcl/netgear-dg834v3.cfg: add to easy firmware recovery list
Change-Id: I6e5205ec41c58dc2fe3fb0051c30918507ef1e88
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1851
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08 22:18:39 +00:00
Paul Fertser c8161b013c tools: add firmware recovery helpers
This adds a set of helper functions with the aim to make it possible
to flash mass-market devices without RTFMing altogether (i.e. to
obsolete GPL-violating proprietary tjtag and other similar software).

Real-life tested on an RT-N16 and WRT54GL.

Change-Id: I197a9b28a5f386803f081057c4b4ebf2f9c447b1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1850
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08 22:18:33 +00:00
Paul Fertser 302a3a8fed tcl/board: add Linksys WRT54GL v1.1 board config
Tested flashing a real v1.1 device.

Change-Id: Ie0d202b9fded8b92e731d93e0ef17be415a75fc8
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1852
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08 22:18:25 +00:00
Paul Fertser faedb14772 tcl: add bcm47xx config and Asus RT-N16 board using it
This adds the bcm47xx config with the special undocumented trick to
put it into standard EJTAG mode from the mystic "LV mode".

The RAM setup is not done as it would require considerable efforts
without much practical gain.

The only issue I noticed so far is that "reset" doesn't actually reset
the chip.

Unfortunately, it's unclear how to make it work properly with SRST as
OpenOCD asserts it in MIPS-specific code so the device will enter LV
mode again but the LV tap is already disabled by that time, so it's
not possible to send the magic command again.

Anyway, this config is more than enough to "recover" any RT-N16
provided the hardware is not damaged.

Change-Id: I0894e339763e6d20d1c93341c597382b479d039b
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1849
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08 22:18:18 +00:00
Robert P. J. Day 58aecca7b3 Update URLs and names in amdm37x.cfg, no functional changes.
* openocd.berlios.de -> openocd.sourceforge.net
* Update link to AM/DM37x Technical Reference Manual (ver R)
* "ICEpick" is properly spelled "ICEPick" according to TI

Change-Id: Ie04458e82c97ef766ec03bd9b9f27edadf5d1cb2
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-on: http://openocd.zylin.com/1856
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08 22:17:44 +00:00
Franck Jullien bc256b17d5 jtag_vpi: make the server address configurable
Change-Id: I58e89c789b79ffb0b54ef94d208be876c271ddf7
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/1840
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-31 12:00:49 +00:00
Alex Murray 6018406c78 target/imx6: Fix typo in setting _SJC_TAPID from SJC_TAPID variable
The set command was missing the $ prefix on the SJC_TAPID variable
and so would fail if SJC_TAPID was set

Change-Id: Ib9af58f5188bd8a2bc3f888309f203d624476c27
Signed-off-by: Alex Murray <alex.murray@cohdawireless.com>
Reviewed-on: http://openocd.zylin.com/1811
Tested-by: jenkins
Reviewed-by: Jens Bauer <jens@gpio.dk>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22 20:23:34 +00:00
Paul Fertser da7f048104 target: add kl25z HLA (stlink) config
Based on Nemuisan Tokusei's. Untested, but original config was reported
to work ok.

Change-Id: Ic991dce55bfca266880081fe2bbd9e6e263b0fc0
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1803
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-19 19:54:55 +00:00
Sergey A. Borshch 03e9729043 at91sam7sx.cfg: fix use $_TARGETNAME as target identifier, not '0' warning
all other at91 cfg files already has this fix.
It also fix "No flash at address 0x...." error when JTAG chain consist of
more than one at91sam7sx cores during attempt to flash other than first mcu
in chain.

Change-Id: I7785d9103d0fc494b6a823e2c73f850373ffe112
Signed-off-by: Sergey A. Borshch <sb-sf@users.sourceforge.net>
Reviewed-on: http://openocd.zylin.com/1812
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-17 23:13:34 +00:00
Nemui Trinomius cd710ebac2 cfg: Add new BSTAPID for STM32F42xxx and STM32F43xxx series
STM32F42xxx & STM32F43xxx series boudary scan TAP-ID are differ from
STM32F405xx/07xx & STM32F415xx/17xx.
And Section number was also fixed for RM0090 rev5.
Tested on a STM32F427IIT6 and STM32F429ZIT6.

Change-Id: Ie9c54c55b97b9c396ace752d94ea2ad916cc8479
Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-on: http://openocd.zylin.com/1808
Tested-by: jenkins
Reviewed-by: Jens Bauer <jens@gpio.dk>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-17 23:07:20 +00:00
Paul Fertser 871b34cf2c tcl/target: add config for Milandr's 1986ве1т controller
This is a Cortex-M1 controller targetting aviation appliances.

Contributed (and live-tested) by 8daemon.

Change-Id: I133d6122cf6492b51ddbdbd800c16ba121d51bf3
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1818
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14 22:05:12 +00:00
Paul Fertser dc0e6eeea4 ftdi/neodb.cfg: mark as tested
Working against openmoko gta02 target, including TRST and SRST (the
stupid samsung chip fully resets under trst, so it's actually of
little use here).

Change-Id: I831124659fc12efbccef536f07d15509c2112f92
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1814
Tested-by: jenkins
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14 21:54:11 +00:00
Sergio Chico 93a3a82e49 topic: Support for the Xilinx BSCAN_* Virtual JTAG in Openrisc
This add support to the Xilinx BSCAN_* virtual JTAG interface.
This is the Xilinx equivalent of the Altera sld_virtual_jtag interface,
it allows a user to connect to the debug unit through the main
FPGA JTAG connection.

Change-Id: Ia438e910650cff9cbc8f810b719fc1d5de5a8188
Signed-off-by: Sergio Chico <sergio.chico@gmail.com>
Reviewed-on: http://openocd.zylin.com/1806
Tested-by: jenkins
Reviewed-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14 21:53:16 +00:00
Andrey Yurovsky 2d64cf92ae stm32lx_dual_bank.cfg: fix typo in file path
s/stm32l1x/stm32lx

...this makes tm32lx_dual_bank.cfg work again.

Change-Id: I04dc617523caa6b46c675fe9b700d1bbe88170e6
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1832
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14 21:48:22 +00:00
Andrey Yurovsky 6accbb8baa add TI TMS570 support scripts
Add support for the TMS570 Cortex-R4 MCU from TI and their USB stick
development kit, TMDX570LS31USB.  Tested attaching, reset/halt/run, and
reading and writing memory and registers.

Change-Id: I12d779cef0c2b834f9bcf722307f35677cc4bd8f
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1788
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-11-06 13:06:41 +00:00
Paul Fertser c044c60121 ftdi/tumpa.cfg: enable proper output buffer control, add another USB ID
The schematics used for writing the config file were incorrect, real
hardware needs ACBUS3 _low_ as it's connected directly to the output
buffer's !OE pin.

Also apparently sometimes TUMPA comes with default FTDI IDs.

Real-life tested (including TRST and SRST) with a custom stm32f103
board, thanks to Mike Wang for the adapter sample.

Change-Id: Iab566e6d14f8392030f6ff2c8d976e1b57cf5ce6
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1789
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31 20:40:28 +00:00
Paul Fertser b16a7f9f6e tcl: add memory testing functions for board diagnostics
This is a tcl implementation of public domain tests by Michael Barr,
http://www.barrgroup.com/Embedded-Systems/How-To/Memory-Test-Suite-C

The initial porting is done by Shane Volpe and posted to the mailing
list:
http://www.mail-archive.com/openocd-development@lists.berlios.de/msg16676.html

This patch includes some cosmetic amendments plus hardcodes 32bit word
size (as the code depends on memread32/memwrite32 anyway) which fixes
original code's issue of testing only the first quarter of the
specified nBytes.

Change-Id: I5f3a66f1f16fc4082c7a5a6aba338430646ed21c
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1455
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2013-10-29 22:50:33 +00:00
Paul Fertser d4e195ad1b Remove jtag_rclk from target configs
Some boards might have RCLK omitted from the JTAG connector and if the
interface claims support for it, OpenOCD will end up trying to use
RCLK while it's actually impossible.

This is a "cd tcl/target; sed -i s/jtag_rclk/adapter_khz/g *" patch.

Change-Id: Iee7337107bc1457966b104389ba9db75a9c860b4
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1695
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2013-10-29 22:49:35 +00:00
Greg Ungerer b3a3d8312e armada370: initial support for Marvell Armada 370 family
Initial support for using the jtag interface to the Marvell Armada 370
family of SoCs.

Change-Id: Id823a567e8805ac622c3c330bc111297c1dae37e
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Reviewed-on: http://openocd.zylin.com/1690
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-21 22:16:58 +00:00
Spencer Oliver 8994b075fc cfg: add STM32F429 discovery board config
Change-Id: I4ee7a8185a02fac9d1f6079ab34d6a9f7047193a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1691
Tested-by: jenkins
2013-10-15 20:42:00 +00:00
Paul Fertser 24099b4c14 board: add TM4C123G LaunchPad config
Almost the same as the LM4F120 LaunchPad but the chip is using the new
naming scheme (Tiva C series), supports USB OTG and has some new PWM
hardware blocks.

Change-Id: I6a7b2df76768766471f366cddaf64df3cc63f5f2
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1647
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-03 09:26:08 +00:00
Franck Jullien 4e79b48e2c Add new target type: OpenRISC
Add support for OpenRISC target. This implementation
supports the adv_debug_sys debug unit core. The mohor
dbg_if is not supported. Support for mohor TAP core
and Altera Virtual JTAG core are also provided.

Change-Id: I3b1cfab1bbb28e497c4fca6ed1bd3a4362609b72
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/1547
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-26 09:52:56 +00:00
Franck Jullien 4b8f866aeb jtag: drivers: Add JTAP VPI client driver
This patch adds a driver for the jtag_vpi server [1]. This server is
now part of the ORPSoC version 3 (OpenRISC Reference Platform SoC).
The jtag_vpi server provides an interface between OpenOCD and a simulated
core.

[1] http://github.com/fjullien/jtag_vpi

Change-Id: I717b72cace4845f66c878581345074f99002e21a
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/1609
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-08 15:37:51 +00:00
Spencer Oliver d177ae04ff cfg: EFM32 supports SYSRESETREQ so use it
Change-Id: If52fdea025a2f9620ad4ddacfb83cbb83a94944d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1541
Tested-by: jenkins
2013-08-29 13:00:47 +00:00
Spencer Oliver ef1f2c0a3d efm32: set safe minimum working area
The smallest available RAM size for this family is 2K, set this as the
default. Issue reported by quitte on IRC.

Change-Id: I3318f7f268f7681ffe2cddab61820f4b94c4e5fd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1559
Tested-by: jenkins
2013-08-29 12:58:49 +00:00
Pushpal Sidhu 1d4b0090e7 Added new ftdi interface device
Added new configuration file for gw16042 device.
Also added this to interface/ftdi examples in documentation.

Change-Id: I07bb10bfc79a5d13007288cd57f254d889075214
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Reviewed-on: http://openocd.zylin.com/1563
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-29 07:56:38 +00:00
Paul Fertser c93d28d642 interface/ftdi/tumpa: remove ftdi_device_desc as it's incorrect
The end users on IRC report that actual USB device has different
information in its descriptor so it doesn't match. Remove it
altogether.

Change-Id: Id7841667390a514581e630e67b9283675803135b
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1548
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-15 14:50:38 +00:00
Brad Riensche 02826721d0 Add tcl configurations for Altera Soc devices
This commit adds two tcl configuration files, one for the Altera
Cyclone V SoC series, and one for the SoCkit development board.
The board configuration is able to halt and resume the cpu cores,
and dump register contents etc.  It has not been fully tested, however.

Change-Id: Id3f18c3408975cf986a5f5aec410b5b13240c35e
Signed-off-by: Brad Riensche <brad.riensche@gmail.com>
Reviewed-on: http://openocd.zylin.com/1494
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-15 14:50:22 +00:00
Sergey Alirzaev f7fed92a4a remove the untested warning in ftdi/olimex-arm-usb-tiny-h.cfg
the dongle seems working, including srst signal

Change-Id: I5da9046bd8a35d8d826f1b663c01bd2600a6cf14
Signed-off-by: Sergey Alirzaev <zl29ah@gmail.com>
Reviewed-on: http://openocd.zylin.com/1545
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-09 15:08:40 +00:00
Paul Fertser fccc55225a mdr32fx: support for Milandr's MDR32Fx internal flash memory
This adds example config and flash driver for russian Cortex-M3
microcontroller model.

Run-time tested on MDR32F9Q2I evaluation board; the flash driver
should be compatible with MDR32F2x (Cortex-M0) too but I lack hardware
to test.

There're no status bits at all, the datasheets specifies some delays
for flash operations instead. All being in <100us range, they're hard
to violate with JTAG, I hope. There're also no flash identification
registers so the flash size and type has to be hardcoded into the
config.

The flashing is considerably complicated because the flash is split
into pages, and each page consists of 4 interleaved non-consecutive
"sectors" (on MDR32F9 only, MDR32F2 is single-sectored), so the
fastest way is to latch the page and sector address and then write
only the part that should go into the current page and current sector.

Performance testing results with adapter_khz 1000 and the chip running
on its default HSI 8MHz oscillator:

When working area is specified, a target helper algorithm is used:
wrote 131072 bytes from file testfile.bin in 3.698427s (34.609 KiB/s)

This can theoretically be sped up by ~1.4 times if the helper
algorithm is fed some kind of "loader instructions stream" to allow
sector-by-sector writing.

Pure JTAG implementation (when target memory area is not available)
flashes all the 128k memory in 49.5s.

Flashing "info" memory region is also implemented, but due to the
overlapping memory addresses (resulting in incorrect memory map
calculations for GDB) it can't be used at the same time, so OpenOCD
needs to be started this way: -c "set IMEMORY true" -f
target/mdr32f9q2i.cfg

It also can't be read/verified because it's not memory-mapped anywhere
ever, and OpenOCD NOR framework doesn't really allow to provide a
custom handler that would be used when verifying.

Change-Id: I80c0632da686d49856fdbf9e05d908846dd44316
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1532
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-07 21:02:51 +00:00
Paul Fertser 1f143e4391 imx6: add new id for SJC as found on i.MX6D
Austriancoder on IRC reports getting this ID on his board.

Change-Id: Ie859f0ee422e18fdb94bf817cdd2b41d15b968da
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1533
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-01 10:32:34 +00:00
Marek Vasut e608ced330 ftdi/board: Add support for DENX M53EVK
Add support for DENX M53EVK board and it's integrated on-board
JTAG adapter using FT2232H.

Change-Id: I022dcafa7799bb84a7873ba67ed82f1e49094320
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/1461
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-15 10:02:37 +00:00
Marek Vasut 7ccc511088 target: Pull out the jtag_rtck from iMX5x files
Pull the jtag_rtck setting from imx51.cfg and imx53.cfg . Since
not all boards using these CPUs do support RTCK signal, move the
configuration of RTCK into board files.

Change-Id: I632c5d38e00ada8779a451cd26428fd122452001
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/1460
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-15 10:02:32 +00:00
Laszlo Papp bb60cc4fef ftdi/xds100v2.cfg: Remove the warning as it has been tested
Change-Id: I3a8711867e247bc49caa79274ae882f07719d4ce
Signed-off-by: Laszlo Papp <lpapp@kde.org>
Reviewed-on: http://openocd.zylin.com/1492
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-07-09 14:52:23 +00:00
Andreas Fritiofson 1a34138724 cfg: Update Flyswatter 2 URL
It pointed to the Flyswatter 1 page.

Change-Id: Ib7e82669a31cad2bf8f6ba4a60b25ef9920b2584
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1478
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-08 09:31:28 +00:00
John Szakmeister 74b139212c Fix a typo.
Change-Id: I3c8ab03932d8769c1cf0c0ccf84cd150c5eb82d8
Signed-off-by: John Szakmeister <john@szakmeister.net>
Reviewed-on: http://openocd.zylin.com/1481
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-07 13:00:59 +00:00
Giuseppe Barba d70f86e7da stm32w: add STM32w108xx generic configuration
Add generic TCL configuration for STM STM108Wxx chips.

Change-Id: I981cdccb78833f442c3be4188c8c023064067e4e
Signed-off-by: Giuseppe Barba <giuseppe.barba@gmail.com>
Reviewed-on: http://openocd.zylin.com/1439
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-12 14:43:23 +00:00
Spencer Oliver bbc193ef8d str9: ignore boundary scan version
Ignore version of Boundary Scan TAP in newer revisions of the str9.

Change-Id: I6e205f8c731f07078c469e686025857c180f3a6d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1436
Tested-by: jenkins
2013-06-12 14:41:28 +00:00
Paul Fertser 703781c5ab ftdi: config for TUMPA
Add a config file for TIAO USB Multi-Protocol Adapter.

Based on schematics from http://www.mediafire.com/?zv158nnx1gv0cy2

Cc: Volkan K <volkan-k@users.sourceforge.net>
Change-Id: I0dfd93b0b1e558e4ccd7c94c005c099947ec94df
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1438
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-06-12 10:16:18 +00:00
Paul Fertser 962b3eb40c Add BCM2835 (as found in Raspberry Pi) interface driver
This adds support for JTAG programming by bitbanging GPIOs exposed on
the RaspberryPi's expansion header.

Tested by connecting directly to an STM32VLDiscovery board, without any
additional circuity. I observed maximum about 4MHz on the TCK pin with an
old analogue 'scope and about 100kHz when setting the speed to 100kHz.
Busyloop waiting is needed because even with a single 0ns nanosleep call
(with FIFO priority) it lowers the TCK speed to ~30kHz which is way too low
to be useful.

The speed testing with adapter_khz 2000 gave the following results:
sudo chrt -f 1 nice -n -19 ./src/openocd \
     -f interface/raspberrypi-native.cfg \
     -c "set WORKAREASIZE 0x2000" \
     -f target/stm32f1x.cfg -c "adapter_khz 2000"

wrote 131072 bytes from file random.bin in 3.973677s (32.212 KiB/s)
dumped 131072 bytes in 1.445699s (88.538 KiB/s)

This is 3.7 times faster for writing and 14.3 times faster for reading
compared to the generic sysfsgpio driver; probably the writing speed is
limited by the target itself here and reading speed might be considerably
higher too with appropriate connection and a capable target.

BCM2835 name is choosen over BCM2708 because the published peripherals
datasheet uses the particular model name and not family name.

Change-Id: Ib78168be27f53c2a3c88c3dd8154d1190c318c78
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/758
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-10 09:39:48 +00:00
Ryan Corbin 76b3563860 Added OpenJTAG Driver
Updated OpenJTAG driver from www.openjtag.org to work with latest version of OpenOCD.

Change-Id: I2917f4e5835fb9ca5265e81dc38515fa97ae9503
Signed-off-by: Ryan Corbin <corbin.ryan@gmail.com>
Reviewed-on: http://openocd.zylin.com/1406
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05 19:52:15 +00:00
Hsiangkai Wang cf8a3c3d70 nds32: add new target type nds32_v2, nds32_v3, nds32_v3m
Add target code for Andes targets.

Change-Id: Ibf0e1b61b06127ca7d9ed502d98d7e2aeebbbe82
Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com>
Reviewed-on: http://openocd.zylin.com/1259
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05 19:27:35 +00:00
Hsiangkai Wang ceb402dc9e aice: add Andes AICE support
Andes AICE uses USB to transfer packets between OpenOCD and AICE.
It uses high-level USB commands to control targets instead of using
JTAG signals. I define an interface as aice_port_api_s. It contains
all basic operations needed by target-dependent code.

Change-Id: I117bc4f938fab2732e44c509ea68b30172d6fdb9
Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com>
Reviewed-on: http://openocd.zylin.com/1256
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05 19:27:23 +00:00
Paul Fertser 9a231e295c interface/ftdi: remove "untested" warning from DP Busblaster
This is reported as working by mitsakos on IRC.

Change-Id: I26b97779c3e8e237c5b3996aa81183031b12ec0c
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1419
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-29 14:32:29 +00:00
Paul Fertser 2aada5b8d9 targets: fix target_type name for Cortex-A targets
Commit d9ba56c295 did a bunch of
renaming of cortex_a8 to cortex_a, including the names in config
files. However that introduced a regression as the name in target_type
struct remained unchanged.

This adds the last missing bit: actual renaming of the target name as
understood by OpenOCD.

Also change the (hopefully) last instance of using it in the supplied
config files, namely from imx6.cfg.

Change-Id: Ib9289fc6d946630133ec6e36c20015ccb50acf61
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1420
Tested-by: jenkins
Reviewed-by: Chris Johns <chrisj@rtems.org>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-28 08:48:45 +00:00
Paul Fertser 49af0788e9 stm32 configs: use 4kB working area size by default
This is needed for configs that might be used with the cheapest
STM32F100 parts that have only 4kB SRAM.

Restrictions for the other STM32 families are verified to be set
appropriately.

Change-Id: I1ad2370435015604db9f27c1a76c153480311a28
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1378
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-10 14:17:56 +00:00
Spencer Oliver 3822a07ed7 cfg: remove whitespace
Change-Id: I20edbb50efc03711195102f4c6dc8bcfaf043d44
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1374
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2013-05-02 16:39:18 +00:00
Spencer Oliver 39cff815d2 cfg: ignore ICEPick jrc tap version
Due to reports of newer targets using a updated version of the ICEPick tap
rather than add another tapid we ignore the tap version.

Also see Trac 49 for details.

Change-Id: Ic78414c54af2545c817e1bb2c860970c1b587259
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1373
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2013-05-02 16:38:48 +00:00
Spencer Oliver d9ba56c295 target: rename cortex_a8 to cortex_a
Rename cortex_a8 target to use a more correct cortex_a name.
This also adds a deprecated_name var so that older scripts issue a warning
to update the target name.

cfg files have also been updated to the new target name.

Change-Id: I0eb1429c9281321efeb444b27a662a941a2ab67f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1130
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28 08:56:04 +00:00
Spencer Oliver b7d2cdc0d4 target: rename cortex_m3 to cortex_m
Rename cortex_m3 target to use a more correct cortex_m name.
This also adds a deprecated_name var so that older scripts issue a warning
to update the target name.

cfg files have also been updated to the new target name.

Change-Id: Ia8429f38e88da677249c5caa560c50f8ce56ea10
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1129
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28 08:55:31 +00:00
Andreas Fritiofson 79d6d3cda9 stm32f30x: Add boundary scan TAP ID to match silicon
Change-Id: I74ef3cfc437540aedd99da46ac3e0c6cd9c5cd8d
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1354
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-21 07:19:35 +00:00
Ben Nahill 28cf4e463b stm32w: Added sample target configuration for STM32W108 with STLink-V2
As requested, here is the target configuration that I'm using for an
STLink-V2-attached STM32W108C8. For some reason, it only seems to work
with "reset_config trst_only".

Change-Id: Icbff4f83343e1f505d8afdfc53ff6f8b7496cac9
Signed-off-by: Ben Nahill <bnahill@gmail.com>
Reviewed-on: http://openocd.zylin.com/1347
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-19 20:36:11 +00:00
Peter Dietzsch 460eb952d8 cfg: Added cfg script for at91sam4sd32x targets
Change-Id: I3b8a54d89a180bfded3dae3f1fe3d940540e6e7d
Signed-off-by: Peter Dietzsch <peter.dietzsch@ib-dt.de>
Reviewed-on: http://openocd.zylin.com/1333
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2013-04-15 16:56:49 +00:00
Salvador Arroyo 1d040adb0d pic32mx: 0 wait state option
By default pic32mx starts after any reset with 1 wait state for RAM access/exec.
It can be changed to 0 wait states by clearing the BMXWSDRM bit (bit 6) in BMXCON register.
With 0 wait states near doubles the execution speed. CRC check sum can be done much faster
increasing verify_image speed. Fast data transfer also works with a bit higher scan rate, up to 1500 Khz.
This option can be set at any time with
mww 0xbf882004 0x40
or cleared with
mww 0xbf882008 0x40.
Some numbers for FTDI/HS with current devel code and a elf file:

Core clock / wait states	             verify_image speed
------------------------------------|------------------------------

        4 Mhz    /    1                            21 KiB/s
        4 Mhz    /    0                            36 KiB/s
        8 Mhz    /    1                            37 KiB/s
        8 Mhz    /    0                            57 KiB/s

Change-Id: I4092ad0f3753f72f77108718d0ed3a3ab84e3b23
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/1141
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-04-02 15:12:44 +00:00
Rodrigo Melo 680230c63c interface: opendous_ftdi config file added
This config file add support to the opendous cable based on the chip ft2232H,
using the ft2232 interface driver.

Change-Id: I8171a0c475af8d61e081844ee86466a392138fb0
Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar>
Reviewed-on: http://openocd.zylin.com/1096
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13 12:32:56 +00:00
Rodrigo Melo 7aaf4f75b3 interface: opendous_ftdi config file added
This config file add support to the opendous cable based on the chip ft2232H,
using the ftdi interface driver.

Change-Id: I4491f99d7b14f7078a04583ef0c4acd8692c4349
Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar>
Reviewed-on: http://openocd.zylin.com/1097
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-07 19:06:51 +00:00
Spencer Oliver 1fd8ac0ee6 cfg: add Netgear DG834v3 configuration
Change-Id: I3f4880d8b07b9623544b94d316b37e6d0ae97020
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1189
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-03-06 21:57:29 +00:00
Vladimir Zapolskiy 0581ab7855 cfg: add basic support of Freescale i.MX6 series targets
This change adds a simple target configuration for Freescale
single/dual/quad core i.MX6 SoCs, only one core is configured by default.

Change-Id: I853dd27f4c6765b7f731be2ddea82e85d496c6a4
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-on: http://openocd.zylin.com/1135
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-06 19:06:06 +00:00
Mathias K 0f1d00bda6 Change reset configuration.
This patch change the default reset config from SYSRESETREQ to the working
VECTRESET.

Change-Id: I21a9a74b9c0c68cfa3a6e6dac9b123acc98a93cb
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/1186
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-05 15:09:23 +00:00
Johan Almquist bfe1a6c892 stm32: add support for the STM32Lx 384kb dual bank flash
This update adds support for the STM32Lx 384kb dual bank flash. Previously there was a problem when writing an
image that was larger than 192Kb. That lead to openocd printing out two error messages like
"Error: access denied / write protected" and "Error: invalid program address". The reason was that the stm32lx
driver tried to write half pages which overlapped into the next flash bank.
A new configuration file stm32lx_dual_bank.cfg can be used for stm32lx chips with dual bank flash (256kb or 384kb devices).
A sanity check was added for probed flash size values to fix the issue seen on some ST samples that answered incorrectly.

Change-Id: I69e25131983d88613be8606b438f98870c5f1e52
Signed-off-by: Johan Almquist <johan.almquist@assaabloy.com>
Reviewed-on: http://openocd.zylin.com/1125
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-02-25 11:56:34 +00:00
Franck Jullien 87668aebf1 jtag_interface: .speed can be NULL when not needed
adapter_init (core.c) won't check speed configuration
of the selected interface if it's not needed (.speed = NULL).

When it's not needed, we can now omit adapter_khz in
init scripts and we don't have to implement dummy handlers
for speed_div and khz functions.

It also removes calls to adapter_khz in interface configuration
files when not used anymore.

Change-Id: I6eb1894385503fede542a368f297cec6565eed44
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/1131
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-02-08 22:33:19 +00:00
Roman D 7ae9154846 flash: EFM32 flash implementation
Limited (no page unprotect, no block writes) implementation of EFM32
flash support. Verified with EFM32 development kit and STLink V2 adapter
using SWD.

Change-Id: I3db2054d9aa628a1fe4814430425db3c9959c71c
Signed-off-by: Roman D <me@iamroman.org>
Reviewed-on: http://openocd.zylin.com/1106
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-01-14 10:25:55 +00:00
Spencer Oliver 80649fc3d5 cfg: increase stm32l-discovery working area
This part has 16k ram so make it all available.

Change-Id: Ifeb7bc850bfe4f68d0affb8f6a0931b4327e7257
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1006
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-30 11:35:16 +00:00
Spencer Oliver 84043a95e1 cfg: stm32l use minimum family ram size for working area
The smallest pert in the family has 10k RAM, so use that as a default
for the working area.

Change-Id: I78be0d14a254c109ac15a7163552c6132f810416
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1005
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-30 11:34:46 +00:00
Spencer Oliver 54a8640df0 cfg: enable stlink stm32l HSI
Switch to using the internal HSI when a reset init is called, this also
matches the std stm32l cfg.

Read (verify) speed is increased from 17 to 120 KiB/s.

Change-Id: Ic94ba85949ffdefa17b7be45eef14e30f941d107
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1004
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-30 11:34:14 +00:00
Spencer Oliver adb8ec32dc icdi: add TI icdi interface
This is the new proprietary interface replacing the older FTDI based adapters.
It is currently fitted to the ek-lm4f232 and Stellaris LaunchPad.

Change-Id: I794ad79e31ff61ec8e9f49530aca9308025c0b60
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/922
Tested-by: jenkins
2012-12-23 21:46:20 +00:00
Spencer Oliver 6c467da586 stlink: rename stlink cmd names
As part of the switch to using the hla for the stlink interface we rename
the cmds to a more generic name.

Update scripts to match new names.

Also add handlers for deprecated names.

Change-Id: I6f00743da746e3aa13ce06acfdc93c8049545e07
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/921
Tested-by: jenkins
2012-12-23 21:45:42 +00:00
Spencer Oliver a047d87196 stlink: use common layout
Even though the stlinkv1 and stlinkv2 use different usb classes they share
the same layout scheme.

Merge the two into a common layout, thus enabling us to support other
adapter layouts.

Change-Id: I7d02c44a7f94ebc7f2cb5428b02ee40294fb430d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/918
Tested-by: jenkins
2012-12-23 21:37:50 +00:00
is2t 1e07f7bb6a LPC1788 target configuration file.
Change-Id: I68bd6b7c19d9d1bee13d0921c32b4490e68ab8f2
Signed-off-by: is2t <devel@is2t.com>
Reviewed-on: http://openocd.zylin.com/1002
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-12-11 12:42:32 +00:00
Salvador Arroyo 115b7be426 Pic32mx.cfg: Change system clock to 8Mhz after reset-init.
As for openocd 0.6.0-rc2 the function mips32_pracc_fastdata_xfer()
should now work at a scan frequency up to 1200Khz.
Mainly usefull to increase programming speed.

Also verify_image should be slightly faster.

Change-Id: I1e9b2be73690a4597e2f6ba069c1205026850f07
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/805
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-11-16 12:25:19 +00:00
Gianluca Renzi ed3632d9c7 Added support for NXP LPC1850 Microcontroller
Added a new configuration file for LPC18xx based boards, such as
HitexLPC1850RevA Evaluation Board, and all other based on the
same microcontroller by NXP.

Change-Id: I68c3827be535b6d09a5c70b6d57191937d00354d
Signed-off-by: Gianluca Renzi <gianlucarenzi@eurekelettronica.it>
Reviewed-on: http://openocd.zylin.com/930
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-11-06 14:34:37 +00:00
Gianluca Renzi 051ec13abc Generic LPC1850 board w/ SPIFI flash.
This config file is intended as an example of how to
use the lpcspifi flash driver, but it should be functional
for most LPC1850 boards utilizing SPIFI flash.

Change-Id: I855854282336701fd210134497ce014017f3aaec
Signed-off-by: Gianluca Renzi <gianlucarenzi@eurekelettronica.it>
Reviewed-on: http://openocd.zylin.com/929
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-11-06 14:34:16 +00:00
Peter Stuge d2f61e1a45 ftdi/flyswatter2.cfg: Define the LED signal
Change-Id: Ic5d85c0d855bcffba54de7df6cff4d726656af97
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://openocd.zylin.com/940
Tested-by: jenkins
2012-10-28 05:25:17 +00:00
Peter Stuge 9064fa9081 ftdi/flyswatter2.cfg: Fix the signal layout
Change-Id: If6612af25fa3562f49e9c8ccff01b6ef0af5ceb0
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://openocd.zylin.com/938
Tested-by: jenkins
2012-10-28 04:33:27 +00:00
Spencer Oliver c9d9573c29 lpc1768-stick: avoid driving srst high at startup
this avoid driving nSRST high after startup, by making sure the nOE is
initialized inactive/high.

This also matches the config used for the STM32-PerformanceStick.

Change-Id: I9376de575b7dc834310d57dbd58575d51f60183e
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/878
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
2012-10-02 22:17:36 +00:00
Spencer Oliver 8d4ad82da7 cfg: cortino tested and working
Change-Id: I13534742c76ebbb05b47bf98768c997068da747a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/851
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 22:03:38 +00:00
Spencer Oliver 28749c15bb cfg: fix incorrect cortino reset config
The cortino uses a direct srst connection rather than via any buffer.
As a result this fixes issues with the newer ftdi driver.

Change-Id: I28f6781bccae24de79aa6a03161f298a14fe2581
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/850
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 22:03:08 +00:00
Spencer Oliver 7cf1a1f04f cfg: ftdi icdi enable srst open drain config
Change-Id: I21a115121f167dc88cd9bf2d1ca1ac9f3e1110d7
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/848
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 22:01:43 +00:00
Spencer Oliver 8cbcd56c0e cfg: update ti/stellaris url's
Change-Id: I96f17c5ea2be506a6b88434616ca52c3e392868a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/879
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 21:59:48 +00:00
Spencer Oliver f8388cd4bb cfg: lm3s811ek config tested and working
Change-Id: I5402b5521d6e1ef0a569f5cad02c003681f5444b
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/847
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 21:59:21 +00:00
Spencer Oliver 3eb80331ce cfg: fix incorrect stm32-performance stick config
This hardware uses a output enable buffer that was not correctly defined.
Fixes issues when using the new ftdi driver.

Change-Id: Iba6235a71a6d3c7d16ab729f858b336a4574dfea
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/844
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
2012-10-02 16:00:44 +00:00
Spencer Oliver a3c09f9624 cfg: stm32-performance stick config tested and working
Change-Id: I9852d11e369e501af240a2b8e9f74306aee4e4a0
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/845
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 12:09:00 +00:00
Spencer Oliver ebece4a981 cfg: add ti ek-lm3s9d92 config
Change-Id: Ib09ca3e57de363a24d704b184ba8546bad08f56f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/853
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 11:34:54 +00:00
Spencer Oliver a046475f03 cfg: add ti ek-lm3s8962 config
Change-Id: I753cec80a904130088b00b3f81b6dd61808662d6
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/852
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 11:34:41 +00:00
Spencer Oliver 46c1114c1e cfg: str9-comstick tested and working
Change-Id: Ia6c45477381e78cb9508b4731438161e18be1f38
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/843
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 11:28:32 +00:00
Spencer Oliver 2076ba093d cfg: add STM32F3-DISCOVERY board support
Change-Id: I4a02e0504fc04ffc1238d9bb77ec05c1f781e7e8
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/810
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
2012-10-02 11:27:59 +00:00
Spencer Oliver 5ed9eb6160 cfg: fix incorrect str9-comstick reset config
The str9-comstick uses a direct srst connection rather than via any buffer.
As a result this fixes issues with the newer ftdi driver.

Change-Id: I0968e8459997a6a2b7bf0c46e89662cd57b4f496
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/842
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 11:27:02 +00:00
Spencer Oliver abccd76ea4 cfg: fix incorrect stm32f3 TAPID
Change-Id: Id66d4e03a77c47a49086ee753bed01b3944064e1
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/855
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 09:37:56 +00:00
George Harris 516719b6b8 Added SPIFI flash driver, algorithms, and docs
Added a flash driver designed to allow program/erase of
memory-mapped SPI flash chips for LPC43xx/LPC18xx family
micros. This driver includes three algorithms - erase,
write, and SPIFI peripheral initialization (to allow
memory-mapped access after a reset). The driver has been
added to the flash driver table (drivers.c), and the
OpenOCD documentation has been updated to include the flash
driver configuration command.

Change-Id: I79f4ff8f1f07de4e5f2fe4f8c23aeb903f868514
Signed-off-by: George Harris <george@luminairecoffee.com>
Reviewed-on: http://openocd.zylin.com/783
Tested-by: jenkins
Reviewed-by: Aurelien Jacobs <aurel@gnuage.org>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-26 16:17:42 +00:00
Marc Reilly fe52282c37 drivers: new jtag bitbang driver using sysfs gpio
This driver implements a bitbang jtag interface using gpio lines exported via
sysfs.

The aim of this driver implementation is to use system GPIOs but to avoid the
need for an additional kernel driver.

A config suitable for RaspberryPi is included.

Change-Id: Ib2acf720247a219768d1cbfeebd88057ed2d7b8b
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Reviewed-on: http://openocd.zylin.com/762
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-26 16:16:17 +00:00
Freddie Chopin 38e547b9c7 Add JTAG-lock-pick Tiny 2 config files
DISTORTEC's JTAG-lock-pick Tiny 2 is a new interface using FT232HL chip
and layout similar to KT-LINK.

Change-Id: I2831b169cd448ca70397f2dd86c5b749dda3dabf
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/787
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-08-29 06:26:39 +00:00
Spencer Oliver 2ce4e31bbc cfg: update for target's that support cortex_m AIRCR SYSRESETREQ
If the target supports SYSRESETREQ make sure we use that as the default
if srst is not fitted/configured.

Change-Id: I24c907493134506320e69c1218702930629c1cdc
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/792
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29 06:24:36 +00:00
Aurelien Jacobs 939f923927 ftdi: Olimex ARM-USB-TINY validated
Flashing a CFI flash and debugging with gdb work fine.

Change-Id: Ib2578ee6f41c1003968198439033d00d805122f7
Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Reviewed-on: http://openocd.zylin.com/770
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24 16:49:01 +00:00
Spencer Oliver aec561c7c6 cfg: remove duplicate Olimex ARM-USB-OCD config
This file is already included as olimex-arm-usb-ocd.cfg.

Change-Id: I0e66977c58e74ac93a0dc3a0c88a5e5af4992f8b
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/780
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-14 17:49:50 +00:00
Andrew Karpow 66b9bff3b3 cfg: added new openocd-usb highspeed adapter
The embedded projects shop released a new highspeed version of
the openocd-usb adapter. These configuration files adds support
for it.

Change-Id: I9b23d7889f998712b9041af101e3f0b9aba85b28
Signed-off-by: Andrew Karpow <notandyk@gmail.com>
Reviewed-on: http://openocd.zylin.com/771
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-09 22:30:48 +00:00
Vandra Akos ee8df96b2b added target configs for the lpc17xx devices
lpc1751, lpc1752, lpc1754, lpc1756, lpc1758, lpc1759
lpc1763, lpc1764, lpc1765, lpc1766, lpc1767, lpc1768, lpc1769

Change-Id: I740b66930cd379c9390f3c1031cdbada747a6ce4
Signed-off-by: Vandra Akos <axos88@gmail.com>
Reviewed-on: http://openocd.zylin.com/676
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
2012-08-01 21:15:01 +00:00
Joerg Fischer 8fe2bed92c cfg: Add Hitex LPC1768-Stick using ftdi driver
Add cfg files for Hitex LPC1768 Stick
Website: http://www.hitex.com/?id=1602

This board has a FTDI2232D as JTAG interface, using the
same layout as the Hitex STM32-PerformanceStick but with
different USB PID.

Main MCU is a LPC1768 from NXP.

The interface config uses the ftdi driver instead of ft2232.
The corresponding ft2232 layout would be "stm32stick".

Change-Id: I1fd15588c5af35f7d51777d1ad958cc1dc72c6f7
Signed-off-by: Joerg Fischer <turboj@gmx.de>
Reviewed-on: http://openocd.zylin.com/763
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-01 21:12:27 +00:00
Freddie Chopin b8862229d0 cfg: Add config file variants using the ftdi driver instead of ft2232
part 4 - files that are currently untested

Change-Id: Ic4a08fdefc99e7a9d50885c888c3fca60ffa39bd
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/750
Tested-by: jenkins
2012-08-01 21:10:58 +00:00
Freddie Chopin 2b6a75538a cfg: Add config file variants using the ftdi driver instead of ft2232
part 3 - files that are currently untested but verified with schematics

Change-Id: Ia00c3b6437bffcfa0d178e779926ad9309e289fe
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/755
Tested-by: jenkins
2012-08-01 21:10:30 +00:00
Freddie Chopin b56bad824b cfg: Add config file variants using the ftdi driver instead of ft2232
part 2 - files that are currently untested but assumed to work, as other configs using the same layout work
fine

Change-Id: Ifaa1904227ebdc394362ccaf3ad3c5384a716657
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/754
Tested-by: jenkins
2012-08-01 21:09:54 +00:00
Freddie Chopin 7b67ec988c cfg: Add config file variants using the ftdi driver instead of ft2232
part 1 - files that were tested an verified as working fine

Change-Id: If5986853a1cf118a9eb3b4c13b036d0f71c39624
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/534
Tested-by: jenkins
2012-08-01 21:08:35 +00:00
Vandra Akos ba00ef3c40 lpc1768.cfg abstracted and moved to lpc17xx.cfg
- Moved variant-independent code to lpc17xx.cfg, which will be included from
lpc17??.cfg files automatically.
- lpc1768.cfg filled with variant-dependent code.

Change-Id: I7dabe6ed7da7be640ed38c13aaaa096b8796d9a0
Signed-off-by: Vandra Akos <axos88@gmail.com>
Reviewed-on: http://openocd.zylin.com/675
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-07-30 06:18:51 +00:00
Andreas Fritiofson 52125f1d13 cfg: remove deprecated stm32 target configs
These were deprecated in commit 69ac20a.

Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Change-Id: I047872f8cd61b42aaca6588ab75566219e4a3f5d
Reviewed-on: http://openocd.zylin.com/741
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-07-30 06:18:34 +00:00
Tom Rini 5e4ee571cc board: Add TI AM335x Evaluation Module
This patch adds the TI AM335x Evaluation Module (ti_am335xevm) board
configuration file.

Change-Id: Id3529e54972f8acd8c790ad55c8d0f4058a1a1f6
Signed-off-by: Tom Rini <trini@ti.com>
Reviewed-on: http://openocd.zylin.com/753
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-19 18:48:06 +00:00
Freddie Chopin af9918deec Add config file for Lattice LC4032ZE CPLD (ispMACH 4000ZE family)
Change-Id: Iefec12b30ff737317c454b472200fd7e7edde619
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/748
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-17 08:29:32 +00:00
Spencer Oliver 1df6e59178 flash: add stm32f3x support
add support for the new stm32f3x family from stmicro:
http://www.st.com/stm32f3

Change-Id: Icd1db95bb2767d9c0ecef24deefa92b4fdaa4f14
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/735
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-07-11 10:32:39 +00:00
Christopher Kilgour aeb3c4f37e kinetis: update support for all program flash granularities
Updates the Kinetis NOR flash support to handle all known block and sector
sizes.  Previously only 2kiB sectors were hard-coded, now all four known
combinations non-volatile sector sizes are supported.

The premise of separating Kinetis Program Flash (PFLASH) from FlexNVM is
also introduced.  This means each "block" of flash (in Freescale terms) is
treated as a bank in OpenOCD.  Correspondingly, the existing board
configuration for the TWR-K60M512 eval system is updated to recognize two
banks instead of one.

A board config for the TWR-K60F120M is also added.

Bank and sector erase and programming has been checked with both of the
mentioned eval boards.

Change-Id: Iae2d10ebf8f548d0a3698df5430bbbe1ccadc58a
Signed-off-by: Christopher Kilgour <techie@whiterocker.com>
Reviewed-on: http://openocd.zylin.com/663
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Jan Dakinevich <jan.dakinevich@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26 11:53:37 +00:00
Vandra Akos d50ce65962 lpc1768.cfg pulled out constants from flash init as variables
Seems like an esthetic change, but it will allow easy support for
other lpc17xx devices.

Change-Id: I2cb953ce1afdd82f6ca65b38d5557a28416f895e
Signed-off-by: Vandra Akos <axos88@gmail.com>
Reviewed-on: http://openocd.zylin.com/674
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26 10:02:03 +00:00
Mathias K 423bfc49f9 board: Add Sony Ericsson J100I Phone
This patch add the Sony Ericsson J100I Phone to the board configurations.

Change-Id: I083ddf067c8ecdfdda0404fe9e9df980dbb86fe8
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/631
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-25 12:06:41 +00:00
Mathias K d6334188ec config: Add TI Calypso CPU configuration
This patch add the TI Calypso CPU to the configuration files.

Change-Id: Ieb462960391c4a2c630d7a83699c3b6e8162ace9
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/630
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-25 12:06:22 +00:00
Spencer Oliver bb3793c9a4 target: remove legacy target events
These events have been deprecated for a number of years, update any
remaining scripts to the new events.

Change-Id: Ic31ff388545ac8b3a500045699ca92c541b13f12
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/634
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-21 16:19:28 +00:00
Spencer Oliver 0eaa8e7db0 jtag: add opendous and estick support
Change-Id: I49c25d226f05fdcaca6cbfc35c2ab47e8464abec
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/611
Tested-by: jenkins
2012-05-14 09:41:49 +00:00
Freddie Chopin caeb057205 Use hardware reset and connect under reset on boards with ST-LINK/V2, as
now it is supported.

Change-Id: Id3b2ca9a2270974a5f453323f9057ecece400c94
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/609
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-14 09:32:20 +00:00
Spencer Oliver a09bb27e23 cfg: add stm320518-eval onboard stlink config
Change-Id: Ie92a87ce077c538fdd04af37c798e0a8054b423a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/610
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14 09:32:03 +00:00
Spencer Oliver 7fca524606 cfg: increase stm32f0discovery board working area
Change-Id: Iea166ee27fc60bbfdeb851fdcf71509f3984f72f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/602
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-08 14:05:45 +00:00
Spencer Oliver 85c0375337 cfg: increase stm32f0 default working area
The smallest stm32f0 has 4k sram, so use this as the default.

Change-Id: I9097be9608da92b1b9da504e5bacc1280c86907a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/603
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-08 14:05:11 +00:00
Bill Traynor dcb222e072 cfg: Deleted duplicate busblaster.cfg and renamed original.
The busblaster.cfg was contributed on April 23, 2012 and is a
duplicate of dp_busblaster.cfg that was contributed on Oct. 23,
2011.  Therefore, deleting the second version.  Also, renaming
the original dp_busblaster.cfg to simply busblaster.cfg, as this
name is more concise.

Change-Id: Iccb1f10f53dbbb248b1ff4c6295eaf67c32247c1
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/622
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-08 14:03:42 +00:00
Bill Traynor f7a37efc3f cfg: Fixed product link to Flyswatter2
Fixed the product link to the Flyswatter2 debugger:
http://www.tincantools.com/product.php?productid=16153

Change-Id: I7d65e8c94d4521e61b9ae72a5ce14b140b775697
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/620
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins
2012-05-07 20:14:09 +00:00
Bill Traynor 388d041e0f cfg: add default pid/vid pair to beaglebone board cfg.
The newer versions of BeagleBone boards use the default vid/pid
pair for FT2232 debugging.  Please see the following README:
http://beagleboard.org/static/beaglebone/latest/README.htm
On revision A3/A4 boards, the VID/PID were chosen to match the
 TI XDS100v2 (0x0403/0xA6D0). On A5 and newer revisions when we've
 given the authors of CCS the chance to update their software, the
generic FTDI VID/PID (0x0403/0x6010) will be used to simplify
installation of drivers for systems already having those drivers.

Change-Id: I44228eb2029162f23d084eb05bcfef39e615668d
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Reviewed-on: http://openocd.zylin.com/619
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-07 19:58:15 +00:00
Spencer Oliver ee38fff78b cfg: fix incorrect stm32vldiscovery working area
The working area used in the config was incorrect, we only have 8K on this
board not 16K as the original cfg was declaring.

Change-Id: Ie0309fb86d839bd3bc1ac9383905b581fac5c388
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/598
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30 13:06:34 +00:00
Spencer Oliver 8002ed268d cfg: allow stm32discovery parameter override
This enable the user or board config to override the parameters
passed to stm32_stlink.cfg.

Required to fix a incorrect working area bug with the stm32vldiscovery.

Change-Id: I40a4f7913ff37d577d44b1f23befccf0317080a1
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/597
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30 13:06:29 +00:00
Spencer Oliver ff6c3dd13c cfg: remove unused stlink options
reset_config is now supported by stlink, remove from the config as this
is a per board option.

Change-Id: I85208d2154502b8d3a098afe1d9a28d75820a7c0
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/582
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30 13:05:23 +00:00
Olivier Schonken d1cd97777b topic: Added support for the SAM4S variants
Atmel introduced 6 new Cortex-M4 processors on 2011-10-26
SAM4S16C - 1024KB flash LQFP100/BGA100
SAM4S16B - 1024KB flash LQFP64/QFN64
SAM4S16A - 1024KB flash LQFP48/QFN48
SAM4S8C - 512KB flash LQFP100/BGA100
SAM4S8B - 512KB flash LQFP64/QFN64
SAM4S8A - 512KB flash LQFP48/QFN48

The SAM4S processors still suffer from the "6 waitstates needed
to program device" errata.

Other relevant changes are:
1. Address of flash memory starts at 0x400000.
2. EWP (Erase page and write page) only works for the first two 8KB "sectors"
3. Because of the EWP not working for all the sectors, normal page writes have
to be used.  The default_flash_blank_check is used to check if lockregions
should be erased.
4. The EA (Erase All) command takes 7.3s to complete. (Previous timeout was
500 ms)
5. There are 128 lockable regions of 8KB each.

Implemented default blank checking, and page erase for load_image scenarios.
This is to compensate for the EWP flash commands only working on the
first 2 8KB sectors.

Change-Id: I7c5a52b177f7849a107611fd0f635fc416cfb724
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Reviewed-on: http://openocd.zylin.com/528
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-26 10:58:14 +00:00
Allen Martin f908bae6bf cfg: Add interface config for Dangerous Prototypes Bus Blaster
This is a FT2232 based USB JTAG dongle

Change-Id: Ibed773a23b6446df62fe4eac16c27fb2d741f4c3
Signed-off-by: Allen Martin <amartin@nvidia.com>
Reviewed-on: http://openocd.zylin.com/589
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-23 10:00:12 +00:00
Uwe Hermann 28e43783e5 Split olimex_stm32_h107.cfg.
Use one board file per eval board, so that the filename matches the
exact board the user has / wants to use. Merging different boards into
one file is confusing.

Change-Id: I7c50233924a87a913723d7215c4851039c2971bc
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/566
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-20 15:33:24 +00:00
David Anders 43d4ae4763 pandaboard: add initial TCL support for pandaboard-es
add initial TCL support for the pandaboard-es which is
based on the omap4460 from Texas Instruments.

Change-Id: Ic63588721487feb95e7cb3d41cfaab0d2f181766
Signed-off-by: David Anders <danders.dev@gmail.com>
Reviewed-on: http://openocd.zylin.com/573
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-18 20:32:08 +00:00
David Anders 28c0f2befc omap4460: add initial TCL support for the omap4460 es1.0
this patch adds the initial support for the omap4460 es1.0
version which is similar to the omap4430 and used on the
pandaboard-es.

Change-Id: If885f7d9f8809929bd799786b539e4f499fa3478
Signed-off-by: David Anders <danders.dev@gmail.com>
Reviewed-on: http://openocd.zylin.com/572
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-18 20:00:27 +00:00
Spencer Oliver 7e2fb7ce9a cfg: add stm32f0discovery board config
Change-Id: I4fccdbd4e0a3bc70cd425c910ad1007519098e20
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/570
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins
2012-04-18 10:50:16 +00:00
Uwe Hermann b6068f5a48 Glyn Tonga2: Faster JTAG speed after CPU/RAM init.
Change-Id: Ib08dae0035355138c468483a7ee2d73aadedf430
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/564
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-13 08:57:29 +00:00
Stephane Bonnet 57dce9560a ft2232: Support for Digilent HS1 USB adapter
* Added support to the FT2232 driver for the FT2232H-based
  Digilent HS1 adapter.

Change-Id: Iab6cc15f299badaf115615b5d4d785ecb2273c27
Signed-off-by: Stephane Bonnet <bonnetst@hds.utc.fr>
Reviewed-on: http://openocd.zylin.com/558
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10 20:19:47 +00:00
Wjatscheslaw Stoljarski (Slawa) 108a458ab8 cfg: add icnova_imx53_sodimm board config
Add board config for In-Circuit ICnova iMX53 SODIMM

Change-Id: I3802ab1695baa75c1f170cf1af0e38ada284c0b8
Signed-off-by: Wjatscheslaw Stoljarski (Slawa) <wjatscheslaw.stoljarski@kiwigrid.com>
Reviewed-on: http://openocd.zylin.com/543
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10 12:25:52 +00:00
Wjatscheslaw Stoljarski (Slawa) e3b3273433 cfg: add imx53loco board config
Add board config for iMX53QSB (loco)

Change-Id: I8659dcd71a56d5fe855eaf62be0a415198b558c5
Signed-off-by: Wjatscheslaw Stoljarski (Slawa) <wjatscheslaw.stoljarski@kiwigrid.com>
Reviewed-on: http://openocd.zylin.com/542
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10 12:24:00 +00:00
Simon Widmer fad7240689 Support for KaRo TX25 CPU Module on a StarterkitV base board
This patch adds support for the KaRo TX25 module on a StarterkitV base board.
For board details, check http://www.karo-electronics.com/tx25.html

Change-Id: I2c80c5467bc476955b55196728aa3c37c8185e6c
Author: Simon Widmer <simonxwidmer@gmail.com>
Signed-off-by: Mark Vels <mark.vels@team-embedded.nl>
Reviewed-on: http://openocd.zylin.com/557
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10 12:15:16 +00:00
Uwe Hermann 1748aab2c9 Initial config for the Voltcraft DSO-3062C.
This is a digital oscilloscope which uses a Samsung S3C2440 internally.

http://randomprojects.org/wiki/Voltcraft_DSO-3062C

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Change-Id: I5e28c3a8f30665a162e34c831294e4e658a16ebb
Reviewed-on: http://openocd.zylin.com/548
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-02 00:02:56 +00:00
Spencer Oliver 067ac78b61 cfg: add support for STM3220G-EVAL onboard STLINK
Change-Id: Icd7a1baf6f2623e5b57d29c4602a2762af730936
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/541
Tested-by: jenkins
2012-03-30 16:02:36 +00:00
Spencer Oliver e9976aa3a8 cfg: add STM32F4x and STM3241G-EVAL config files
This adds support for the STM32F4 target and the STM3241G Eval Board, in
both standalone and using the onboard STLINK.

Change-Id: I62f8908b5880568b2b36c78a78f94c40861ff335
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/540
Tested-by: jenkins
2012-03-30 16:02:14 +00:00
Spencer Oliver 4e31b87943 scripts: use adapter_nsrst_delay not deprecated jtag_nsrst_delay
Change-Id: Idf98526d64dcba4d8a5b6910bd3c539756753e8e
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/539
Tested-by: jenkins
2012-03-30 16:01:51 +00:00
Olivier Schonken 90d33c5c87 Added tcl config scripts for SAM3A/X targets and devboard
The SAM3A/X processors that were released thus far is either
a SAM3A/X(4) - 256K, or a SAM3A/X(8) - 512K device.  Thus
the config files are per variant, and not per device.

Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>

Change-Id: I84d26d044e810eb428b1d6287907ea3bf8364c73
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Reviewed-on: http://openocd.zylin.com/522
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-30 15:56:19 +00:00
Chris Morgan 8fc35a696f Create a init_board procedure for the ea dev board.
Signed-off-by: Chris Morgan <chmorgan@gmail.com>
Change-Id: I082b0d3092c7f3b2ee6b68af64d48c78b31f1dbf
Reviewed-on: http://openocd.zylin.com/510
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-30 15:53:06 +00:00
Spencer Oliver 35e7377160 cfg: correct pic32mx config typo's
Change-Id: Ibe5b6b0efefc7cfc75d789eb7e9c7ee239526ae2
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/508
Tested-by: jenkins
2012-03-14 20:30:45 +00:00
Jan Dakinevich 34d1f82c75 jtag: basic support for P&E Micro OSBDM (aka OSJTAG) adapter
This driver provides support for the P&E Micro OSBDM adapter (sometimes
named as OSJTAG), mounted on the Freescale TWRK60N512 bord. Thus, it
provides a quick start when working with this board. The driver doesn't
use BDM commands, but work with OSBDM adapter using only JTAG commands.

Change-Id: Ibc3779538e666e07651d3136431e5d44344f3b07
Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com>
Reviewed-on: http://openocd.zylin.com/492
Tested-by: jenkins
Reviewed-by: Tomas Frydrych <tf+openocd@r-finger.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-13 17:04:07 +00:00
Øyvind Harboe ed12a6521f flash: retire unused eCos flash driver
even the AT91EB40a's flash is covered by CFI and nobody ever submitted
any other drivers based on eCos code. It's just possible that this
idea was missing documentation and "marketing", but it's in git if
somebody wants to resurrect it.

Change-Id: I66449aa6e0997301f9d67f28098789bfc891d6e9
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/502
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-03-11 21:14:21 +00:00
Jim Norris 0ab3f83667 Add new configuration files for the Diolan LPC-4350-DB1 development
board with the NXP LPC4350 processor.

Change-Id: I0843e96af9ca05d3e598e2e16eb19fc0581ab46d
Signed-off-by: Jim Norris <u17263@att.net>
Reviewed-on: http://openocd.zylin.com/501
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06 13:31:59 +00:00
Jaap de Jong 428d1559ee config: fix typo in at91 config
Change-Id: I596cbac3439456fcb02111caee6e8c290c12a6d5
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/504
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins
2012-03-06 10:30:54 +00:00
Neil Jensen 21a0f9b48b cfg: Beaglebone/AM335x refactor
Split out functions specific to the AM335x SOC into the target directory and simplified the board config
file.  This should allow one to quickly create new configs for boards based on the TI processor family.

Change-Id: I0c3db97950dfa832f1f1918fc10c180f068bba74
Signed-off-by: Neil Jensen <neil30al@gmail.com>
Reviewed-on: http://openocd.zylin.com/489
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-27 10:01:44 +00:00
Neil Jensen 3a7ca6a621 cfg: beaglebone cleanup
Simplified the configuration and removed things that were not necessary for debugging.  Also added reset
configuration.

Signed-off-by: Neil Jensen <neil30al@gmail.com>
Change-Id: I96f991c3051aa68278212cd6509484cbce40ccb7
Reviewed-on: http://openocd.zylin.com/488
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-27 10:01:01 +00:00
Neil Jensen dec6b91380 cfg: beaglebone
Moved ti_beaglebone.cfg to the board configuration directory.  This was
originally placed in the wrong location.

Signed-off-by: Neil Jensen <neil30al@gmail.com>
Change-Id: I05d10b62b1a21618635ee1773c30d77dc756ec82
Reviewed-on: http://openocd.zylin.com/481
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-24 09:11:49 +00:00
Neil Jensen e6580a3cff cfg: Beaglebone Support
Added support for the Beaglebone board based on the am335x processor
family.  After much trial and error, I was able to configure the
Icepick-D and connect to the processor, halt execution, and run a sample
program.  This is a unified config file (it doesn't use any include
statements) and further work needs to be done to split out the icepick-d
configuration to be more generic.

Change-Id: Ia1b8e9f01f56bd4f8c575ba3d0160c248583a15e
Signed-off-by: Neil Jensen <neil30al@gmail.com>
Reviewed-on: http://openocd.zylin.com/471
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-23 14:11:04 +00:00
Spencer Oliver f0ef9960b6 cfg: enable stm32f2x SYSRESETREQ support
The stm32 family supports using SYSRESETREQ as a software reset, lets
use it.

Change-Id: I171ffa8d888a2d0c28b266051030311521e9bca9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/472
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-02-22 20:55:43 +00:00
Jonathan Dumaresq 445770c081 Fix Typo in cfg file
Change-Id: Id91ef70988212185f9ec653cbf5dc4e1defb1b9e
Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
Reviewed-on: http://openocd.zylin.com/464
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-17 14:02:50 +00:00
Spencer Oliver fd39a5e8ad cfg: change default stellaris working area
This sets the default stellaris working area to 2k rather than
the current 8k. 2K is the smallest RAM size in the stellaris family.

Change-Id: I1407f758eb0926cc094b824a6d25199b313c45de
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/458
Tested-by: jenkins
2012-02-16 08:57:22 +00:00
Jonathan Dumaresq b0ef9cf117 Add stm32f0x target
Change-Id: I4abfef4459b7e2780d17bdd7623fd1ef797cc8ea
Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
Reviewed-on: http://openocd.zylin.com/437
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-16 08:56:18 +00:00
Lars Poeschel 87bf0db125 add icnova_sam9g45_sodimm support
This adds support for in-circuit icnova sam9g45 sodimm: http://www.ic-board.de/product_info.php?info=p214_ICnova-SAM9G45-SODIMM.html|ICnova
The NAND flash is not yet working.

Change-Id: I94ca5203f8d8a55dec1e4e87cd0631bd2b8393f9
Signed-off-by: lars@kiwigrid.com
Reviewed-on: http://openocd.zylin.com/418
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-13 12:04:00 +00:00
James Robinson 5d43ffd5bc topic: Add support for i.MX28EVK
Added the file imx28.cfg to the target directory
Added the file imx28evk.cfg to the board directory

Change-Id: I02a74a03f3773892f830d13660ffdded34f3261d
Signed-off-by: James Robinson <jmr13031@gmail.com>
Reviewed-on: http://openocd.zylin.com/428
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-13 12:03:26 +00:00
Spencer Oliver 5bcb78f181 cfg: add revb ek-lm3s811 board config
Add board config for older (revb) ek-lm3s811

Change-Id: I75aca1714de3e88b60d00fa0f99f2c4b076b569c
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/444
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-10 16:59:06 +00:00
Spencer Oliver 60c2ea144b cfg: fix incorrect STM32L SW-DP id
STM32L ref manual (RM00038 Rev5) states the SW-DP id should be 0x4ba00477.
The correct value from silicon is 0x2ba01477 - the typo has been confirmed by ST.

Change-Id: Ie35a1f13dc5dedc1b148fb219c6974bfa48b537c
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/441
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-10 14:24:00 +00:00
Spencer Oliver 19edcec872 cfg: add stm32ldiscovery board config
Change-Id: I392fdc4c588783fda1c7d4d6413b86ae9aa3f6b9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/442
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-10 14:23:45 +00:00
Spencer Oliver d608dcaa62 cfg: add ST-LINK TRANSPORT config override
This enables the user to override the transport used for st-link.
If JTAG is selected it will also change the default id used to the JTAG id
rather than the SW-DP id.

Change-Id: I4fe352e4932e2f4ec278168e99ba2d2d50fd850a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/443
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-10 14:23:09 +00:00
Spencer Oliver f86986a9ef cfg: add stm32vldiscovery board config
Change-Id: I6343d1e61153ba71c71f8a473171972abb8e400d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/432
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-07 22:39:04 +00:00
Freddie Chopin 4291873994 Export _TARGETNAME from generic LPC2xxx script
Make _TARGETNAME variable global so it could be used by scripts sourcing it.

Change-Id: Iaf1c3b53875734658b1b8f136c9bb958988b56bf
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/421
Tested-by: jenkins
Reviewed-by: Chris Morgan <chmorgan@gmail.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-02-07 06:32:33 +00:00
Mathias K fce4ac5714 STLINK: add stlink v1 configuration
Change-Id: I6b9de16879ff928d60e3c4a64731449275291cc2
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/397
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-27 19:25:58 +00:00
Mathias K 6bbb1479b3 STLINK: swd transport renamed and jtag+swim transport added
This patch add jtag support to the stlink driver add
two new transport types, JTAG and SWIM.

Change-Id: I7089d74250330be5c6a01c24066307641df7d11e
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/393
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-27 19:25:26 +00:00
Spencer Oliver f2ee4eff73 cfg: correct Stellaris LM3S811 config typo
This only effects the older Stellaris LM3S811 kits (rev B and below).

Change-Id: Ie068cce7748fede9e7113ea63a69c96222c809fa
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/401
Tested-by: jenkins
2012-01-27 19:24:36 +00:00
Spencer Oliver a559f8a791 cfg: add missing Stellaris Blizzard info
Change-Id: I1d6fb9a2ec8d87267a266f68c01ce032450e45d5
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/392
Tested-by: jenkins
2012-01-23 11:44:50 +00:00
Michel JAOUEN c25ffd013e u8500: linux rtos config
Change-Id: I21a9dcc5fb260095aed2217e467b74ebecb39afb
Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Reviewed-on: http://openocd.zylin.com/349
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-01-15 22:17:42 +00:00
John fa5b0833d5 cfg: fix typo in str730.cfg
Change-Id: Ie0222b68b3d8dd21726ac4f0cd4106da0e0456dd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/376
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins
2012-01-13 10:25:36 +00:00
Spencer Oliver 327fafc6a2 cfg: add stlink pseudo stm32 targets
Change-Id: I71253c2090162b1214bbbb37396735bb9128f920
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/334
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-01-09 09:49:01 +00:00
Spencer Oliver 51f06253ad cfg: use consistent chipname
Change-Id: I41e0788f830d5ece13e6231a99d5b4013c9c678f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/331
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-01-09 09:48:34 +00:00
Mathias K c479f9b50f Add STM32F2X/STLINK target config file.
Change-Id: I02161fa05da993b5b966c31a706667d1bd91935d
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/287
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-03 21:13:05 +00:00
Mathias K 725e7e6aa7 Add STLINK/V2 interface config file.
Change-Id: I6df27ce619a5938ef854ff89bf76c6de4e122204
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/286
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-03 21:12:48 +00:00
Erik Ahlén 583c9b31ab Made BI-swap optional in mxc.
Change-Id: Ibdf3b1e415adcf1fdb38de25fe05da726ef58ca4
Signed-off-by: Erik Ahlén <erik.ahlen@avalonenterprise.com>
Reviewed-on: http://openocd.zylin.com/269
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-23 09:39:48 +00:00
Erik Ahlén 684e9674a6 Added board type as a parameter to mx2 NFC as they have different base addresses.
Change-Id: I7bc326e9a8d9f6817f046a7faeebede567c53dd2
Signed-off-by: Erik Ahlén <erik.ahlen@avalonenterprise.com>
Reviewed-on: http://openocd.zylin.com/268
Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-23 09:39:18 +00:00
Ulf Samuelsson c6f44bde73 at91sam3XXX.cfg: Configure JTAG clock to 500 kHz.
This affects all configurations including target/at91sam3XXX.cfg

Change-Id: I2c1e1edf0986d30e63f109604a38bf402ded369e
Signed-off-by: Ulf Samuelsson <ulf@emagii.com>
Reviewed-on: http://openocd.zylin.com/292
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-23 09:37:28 +00:00
Erik Ahlén 46cc1df722 Renamed mx2/imx27 to mxc.
Renamed all functions, enums, structs and defines from mx2/imx27 to mxc. This is in preparation of adding support for mx35 NFC(v2).

Change-Id: I92ad23f0cfab605215bbf0d5846c5c288423facf
Signed-off-by: Erik Ahlén <erik.ahlen@avalonenterprise.com>
Reviewed-on: http://openocd.zylin.com/267
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-12-19 07:27:31 +00:00
Antonio Borneo b7ce3b5d15 TCL/SPEAr: default one DDR chip
Handle default case of single DDR chip
Propagate global variable for multi DDR chip

Change-Id: I315380f91ee7fcc2976437aa5836d88a7964fc9d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/251
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-06 21:06:15 +00:00
Peter Stuge d6a1ff8399 Fix remaining incorrect reference to target/at91sam3uXX.cfg
Commit 1794e5ee54 renamed the file to
have all lowercase characters according to most references to the
file, but the commit didn't change the existing reference to the
old filename.

Change-Id: I380e52e947a8091d48cf010e3919bf2caed7fdff
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://openocd.zylin.com/248
Tested-by: jenkins
2011-12-02 06:37:29 +00:00
Harald Welte 1794e5ee54 make sure file name case of at91sam3uxx matches what other files include
Before this patch, at91sam3u4c.cfg includes "at91sam3uxx.cfg" which
doesn't exist - the filename was at91sam3uXX.

However, many operating systems have case sensitive file names!

Change-Id: I8b2f987f1f4214269b80ef5cba8177ce05ad90b6
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Reviewed-on: http://openocd.zylin.com/247
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-01 22:28:33 +00:00
Antonio Borneo 17322b729c TCL/SPEAr: fix name of included file
Fix error introduced in recent commit.
Correct the name of the board file.

Change-Id: I46bca8329812fb24bc4f8d316be9e7cba9b56496
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/234
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-22 21:02:55 +00:00
Antonio Borneo 3291edf1e7 TCL: Add board file for EVAL_SPEAr320CPU
Initial support for SPEAr320 chip and for evaluation
board named EVAL_SPEAr320CPU.

Change-Id: I85524655769bcc610294a26db47a7a399256fbb7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/231
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-21 22:09:47 +00:00
Antonio Borneo c8f4d82b45 TCL: Add board file for EVALSPEAr300
Initial support for SPEAr300 chip and for evaluation
board named EVALSPEAr300.
Currently supports only those parts in common with
SPEAr310.

Change-Id: I8075aa721cf3dfaac561ee51e5df4ce9a2992e3e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/230
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-21 22:09:09 +00:00
Antonio Borneo 56e64812b8 TCL/SPEAr: remove code to autodetect DDR
The code to autodetect DDR was wrong and not complete.
Replaced with a parameter passed to TCL proc.
Split DDR configuration in the two cases of single and
dual DDR chip, using single chip as default.

Change-Id: If39aa518670398e8e4f207d7db6e812a49743e15
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/229
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-21 22:08:30 +00:00
Antonio Borneo 40d9b24195 TCL/SPEAr: move DDR activation in common code
DDR controller activation should not be in DDR chip
specific code, but in generic DDR controller part.

Change-Id: If1b178228352b48b0097d7b9b300005fb5bb4fb6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/228
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-21 22:07:50 +00:00
Antonio Borneo 841ee77350 TCL/SPEAr: Join two initialization files.
The support for SPEAr3xx family members does not require
dedicated files for each member.
Join the initialization scripts in a single file.

Change-Id: I45e9dc64809a6f52c4592e3e0eef5529394887c6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/227
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-21 22:07:19 +00:00
Antonio Borneo 03fc47a79e TCL/SPEAr: move device generic code
The initialization of RAS enable and clock is required by
all SPEAr3xx devices

Change-Id: Iea4cd0902e4da219475d7f35b4c25fc87ec6b902
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/226
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-21 22:05:39 +00:00
Antonio Borneo c44293b0f8 TCL/SPEAr: move device specific code
The initialization of memory port 1 is required by
SPEAr310 only

Change-Id: I9d655da1026795f02ff2f82aed36441068cf266d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/225
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-21 22:04:46 +00:00
Antonio Borneo 218a4b4e20 TCL/SPEAr: Add reference to ST Application Note
ST-AN was mentioned but there was no reference

Change-Id: Ie065f8faba94d63cf391a994ec895692d499394e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/224
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-21 22:03:17 +00:00
Spencer Oliver 0f41634d4f scripts: use adapter_khz not deprecated jtag_khz
Change-Id: Ibaeebf564a95360dcf21a0921ec99f5263f11915
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/202
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-11-18 22:14:55 +00:00
Tomas Frydrych f2af5a7b48 configuration for Freescale TWRK60N512 board
Based on the K40/Kwikstik config files

Change-Id: Icb3adc7126bacea65209b712ebaa0eb3b894372e
Signed-off-by: Tomas Frydrych <tomas@sleepfive.com>
Reviewed-on: http://openocd.zylin.com/210
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-17 17:33:28 +00:00
Felix Ruess 78677c6b42 config: do not use deprecated stm32.cfg
Change-Id: Id72d2d7f874043331ecb5586a3797d017606129e
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Signed-off-by: Felix Ruess <felix.ruess@gmail.com>
Reviewed-on: http://openocd.zylin.com/212
Tested-by: jenkins
2011-11-17 17:30:03 +00:00
Marek Vasut ffe969898f Add Tincantools Flyswatter2 support
This is a successor to the Flyswatter cable and is very close to the original.
The new revision is based on FT2232H.

Change-Id: Icc6efcf0e4f9d8a10b65df8679b4973f6b375a9f
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: David Anders <danders@tincantools.com>
Reviewed-on: http://openocd.zylin.com/193
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-15 20:55:11 +00:00
Aurelien Jacobs ac813a666a at91sam7: add a new target config file for at91sam7x512
The main difference with at91sam7x256 is the declaration of the second
bank of flash.

Change-Id: I87a20dcbb639b797799139ccf46cc73934fa3b9e
Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Reviewed-on: http://openocd.zylin.com/173
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-08 08:07:22 +00:00
Uwe Hermann ca45e700b1 target config files: Fix whitespace issues.
Drop useless double-space occurences, drop trailing whitespace, and fix
some other minor whitespace-related issues.

Change-Id: I6b4c515492e2ee94dc25ef1fe4f51015a4bba8b5
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/137
Tested-by: jenkins
2011-11-07 16:16:33 +00:00
Uwe Hermann d031b5def8 interface configs: Add missing URLs and names.
Also, drop author name from interface/hilscher_* files, that info is in the
git log, and none of the other files contain author names either.

Change-Id: Idf0eb4279c4bff31d15c166619c0bf8b1c5bb877
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/138
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-03 23:53:26 +00:00
Spencer Oliver 252758b6a1 cfg: add Stellaris LM4F232 Evaluation Kit config
Change-Id: Ica754897bef6573a0738ed1afdfe1dfda07292fd
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/151
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-11-02 23:32:03 +00:00
Spencer Oliver 07be858d2a cfg: add Blizzard class to stellaris.cfg
Change-Id: I2a1320c696b6d9b070e4a927c4cd4d68178af751
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/150
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-11-02 23:30:06 +00:00
Mark Vels 444f202360 tx27stk5: add board init support for KaRo TX27 CPU module
This patch adds support for a KaRo TX27 CPU module on a StarterkitV base board.
The register settings have been extracted from a RedBoot distribution
that is distributed along with the hardware by KaRo.

This setup has been tested with a JTAGKey. The testing has been focussed
on loading a program into memory and start execution.
Although the flash seems to be correctly detected, no effort has been put
in testing the NAND programming yet.

Change-Id: Ib17763f1e3ecacd0eb9b5fdc32f8cba7a5e59be5
Signed-off-by: Mark Vels <mark.vels@team-embedded.nl>
Reviewed-on: http://openocd.zylin.com/158
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-02 14:57:52 +00:00
Uwe Hermann c0e1bfa8b4 interface configs: Fix whitespace and other issues.
Change-Id: I98825c7fb9bdee75b69b06005ed12a3f64ec4db4
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/139
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-30 02:06:07 +00:00
Uwe Hermann abfd4b19a6 config files: Drop incorrect comments.
There are many "force an error till we get a good number" comments in
target/board files. This refers to the use-case where a config script
sets _CPUTAPID to 0xffffffff (which presumely gets overridden later):

 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
    # Force an error until we get a good number.
    set _CPUTAPID 0xffffffff
 }

However, the same comment was also copy-pasted in many files which do
_not_ set _CPUTAPID to 0xffffffff, where the comment doesn't make any
sense at all. Drop those comments. Also, add one missing comment, and
fix small whitespace and grammar issues.

Change-Id: Ic4ba3b5ccba87ed40cea0d6a7d66609fbdfa3c71
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/136
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-30 01:57:33 +00:00
Jim Norris d265fa78c3 Remove use of undefined variable.
Change-Id: Id8fd345438c360b2a42857525f05360ce2794d21
Signed-off-by: Jim Norris <u17263@att.net>
Reviewed-on: http://openocd.zylin.com/127
Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins
2011-10-27 00:47:22 +00:00
Jim Norris 2036c2aaae Add configuration for ATMEL SAM3N-EK board.
Change-Id: I525f6c346cace4e54f47659c5a7aceb29ee4baf2
Signed-off-by: Jim Norris <u17263@att.net>
Reviewed-on: http://openocd.zylin.com/125
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-26 20:31:45 +00:00
Jim Norris be17f6b08e Add configuration for ATMEL SAM3N series.
Change-Id: Iac498ab37e59127b989f29a1c4167ab29d625b05
Signed-off-by: Jim Norris <u17263@att.net>
Reviewed-on: http://openocd.zylin.com/124
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-26 20:31:02 +00:00
Marti Bolivar 5cca45d5f9 stm3220g_eval.cfg: fix CHIPNAME.
The STM3220G-EVAL board has an STM32F207IGH6. ("...H6", not "...T6").

Change-Id: Iaf3dae6830c5c0685a1dcd1588d391434bc51be7
Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com>
Reviewed-on: http://openocd.zylin.com/120
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-25 20:08:58 +00:00
Richard Barlow 09fbc0ab86 cfg: Add interface config for Dangerous Prototypes BusBlaster
The BusBlaster from Dangerous Prototypes is based on the FTDI FT2232H IC.
It has a CPLD between the FT2232H and the JTAG header allowing it to
emulate various debugger types. It comes configured as a JTAGkey compatible
device.

Change-Id: Iab56907bf67ded87001e628d93012f1e16287d90
Signed-off-by: Richard Barlow <richard@richardbarlow.co.uk>
Reviewed-on: http://openocd.zylin.com/53
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-23 15:14:02 +00:00
Mathias K c5c4ed82ab add Freescale Kinetis K40 devices and Kwikstik eval board
Change-Id: I4817921d09ab915c50f42651bc073690033450fe
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/51
Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-23 13:23:49 +00:00
Uwe Hermann 36e3009ff9 TMPA900/910 MCUs are always little endian.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Change-Id: I8839f2cf0faf1b5ba9f99901c5ee028b199fabd2
Reviewed-on: http://openocd.zylin.com/35
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-19 00:24:40 +00:00
Uwe Hermann 4f2655c28b Toshiba TMPA900 config: Fix incorrect working area.
The Toshiba TMPA900 series (TMPA900/901) only has internal RAM regions
RAM-0 (16kB) and RAM-1 (8kB) which we can use as working area.

This is probably a copy-paste error from tmpa910.cfg, which has the
correct values and sizes for the TMPA910 series (TMPA910/911/912/913):
there are RAM-0, RAM-1, and RAM-2 (each 16kB).

Also, change "built-in RAM" to "internal RAM" to match what the
datasheet uses.

Change-Id: I993cd6b7fadc28cf34e5cc18426bb2bb42597670
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/34
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-19 00:24:40 +00:00
Spencer Oliver af37d5f196 luminary: add peripheral reset script
some luminary device classes require a reset script
to emulate a hardware reset.

Change-Id: Id505c92451244b48b0238c2130aebab2df8d208b
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/30
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-18 06:35:42 +00:00
Karl Kurbjun 59beb93752 AM/DM37x: Use ICEPick warm reset and include halt when gdb connects.
Using the ICEPick reset seems to allow the processor to be halted sooner
and the halt on gdb connection makes the connect process more robust.

Change-Id: I0586f6e6becc60a729030509ef58907a19d545ec
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/23
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-17 19:36:09 +00:00
Karl Kurbjun 70143a96c5 ICEPick-C: Add support for warm reset through JTAG controller and provide finer detail functions.
This sets up simple functions that can later be used to provide additional
ICEPick Operations.

Change-Id: I313b8679267696fad87d23f3692963e513f2fe21
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/22
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-17 19:35:37 +00:00
Uwe Hermann 498662e2e5 Add an interface file for DLP Design DLP-USB1232H.
The DLP Design DLP-USB1232H UART/SPI/JTAG module is based on an FTDI FT2232H
chip. Among other things, it can used as JTAG programmer if connected to
the JTAG target properly. I have successfully wired the module to an
Olimex STM32-H103 eval board and flashed a firmware onto that using OpenOCD.

The setup details and schematics are documented at:
http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter

Change-Id: I5eb9255a61eeece233009bee77d7dc3b5d1afb8b
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/20
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-13 22:29:28 +00:00
Uwe Hermann d4599b8b3f Add a board file for the Glyn Tonga2.
This is a Toshiba TMPA900CMXBG (ARM9) based SO-DIMM CPU module with 64MB
DDR SDRAM, 256MB NAND flash, and on-board Ethernet.

The board file provides a tonga2_init function which sets up the
PLL/clocks and memory (SDRAM and SRAM), which allows writing a boot-loader
into RAM via JTAG.

Change-Id: I60522b97997bdf50e1f25aebab910d93a98522fb
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Reviewed-on: http://openocd.zylin.com/19
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-13 22:28:16 +00:00
Clément Burin des Roziers da8ce5f2e1 STM32L: Added flash driver and target
Added the flash driver for the STM32L family, which highly differ from the STM32F family.
Added the TCL target file for JTAG access.
2011-10-03 18:42:39 +02:00
Ash Charles a17adf0601 Verdex: Add support for Gumstix Verdex boards.
Gumstix Verdex is a PXA270-based series of computer-on-modules. This
configuration file is based off the voipac.cfg configuration with
a different flash memory configuration. This has been tested flyswatter
adapter to reflash a Gumstix Verdex XL6P board.
2011-10-01 13:11:02 +02:00
Michel Jaouen ac49e24149 u8500 : config for L2 cache 2011-09-30 09:45:29 +02:00
Vladimir Zapolskiy 05b12e6c5e AM/DM37x: add ES1.2 silicon type into account
The missing value for ES1.2 silicon revision is mentioned in
sprugn4m.pdf, and the recent TI Beagleboard XM is powered by it,
so let support the revision.
2011-09-30 09:37:04 +02:00
Uwe Bonnes c50ed69e79 Add definition for the STEVAL-PCC010 board with the STM32F207 2011-09-09 10:29:11 +02:00
Rodrigo L. Rosa 67bb8a6cb2 dsp568013 disable polling by default 2011-08-30 15:08:54 -07:00
Jonathan Dumaresq 4bcf37e2c0 Add Valuline HD to config file
This will add the BSTAP for the medium and high density devices
2011-08-25 20:13:16 +02:00
Jim Paris dd318f8243 Fix redbee config files
Currently the board/redbee-*.cfg files incorrectly include the
interface definition.  Move the interfaces to interface/,
and create a single board/redbee.cfg that is common to both boards.
Intended usage is now:
  openocd -f interface/redbee-econotag.cfg -f board/redbee.cfg
2011-08-24 11:13:26 +02:00
SimonQian 54fc164d3a versaloon driver update
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-08-16 12:50:38 +01:00
B. A. Bryce 29f0ac0efd cfg: allow stellaris device class override
Some devices, eg. The Tempest class return the wrong device class
when queried. Add the ability to manually override the device class.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-08-02 13:10:03 +01:00
Spencer Oliver 69ac20a155 cfg: support calling legacy stm32 scripts
For the time being we support the old stm32 script names - this will
be removed before the next release cycle.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-29 17:01:31 +01:00
Spencer Oliver 89f593d8cb cfg: update scripts to use new stm32 driver names
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-28 11:45:09 +01:00
Spencer Oliver b5a324e63c cfg: add Fujitsu FM3 config
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-27 10:56:25 +01:00
Michael Hunold d6c42bf312 CPU name in TMPA900 config file should obviously be TMPA900 (not TMPA910).
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-18 14:24:05 +01:00
Øyvind Harboe e7269e32a7 stm32f2xxx: comments about frequency choice 2011-07-15 12:05:46 +02:00
Martin Schmölzer b4bbe33d17 Add ULINK interface script 2011-06-26 17:43:51 +02:00
Dale Lukas Peterson 523c172280 Added Olimex STM32 {H,P}107.cfg board 2011-06-16 16:53:49 +02:00
rlrosa 5227ae7162 added minimodule interface 2011-06-12 11:18:27 +02:00
Laurent Charpentier e899fcaca0 Added configuration file for STM3220G-EVAL board. 2011-06-08 07:19:43 +02:00
Laurent Charpentier 01c0ffe98f Added configuration file for stm32f2xxx. 2011-06-08 07:19:39 +02:00
Bear ae02a0e517 uptech2410 2011-06-02 12:17:28 +02:00
Damjan Marion 096fd6bcc0 Board definition for mini6410/tiny6410 (ARM1176)
The following mini6410/tiny6410 functions are available:
init_6410 - initialize clock, timer, DRAM
init_6410_flash - initializes NAND flash support
install_6410_uboot - copies u-boot image into RAM and runs it
2011-05-29 23:42:09 +02:00
Damjan Marion ba576920cf SMDK6410 is not target, move file to board 2011-05-29 20:05:01 +02:00
Rodrigo L. Rosa 129f099ef1 flash support (only full erase/write) for 568013 and 568037 2011-05-18 18:47:55 +02:00
Rodrigo L. Rosa 9d4aec6bda partial support for 568013 and 568037, target integration. 2011-05-18 18:47:50 +02:00
Øyvind Harboe 289cecebf0 beagleboard: add support for various icepick versions
The beagleboard icepick jtag tap id's vary.
2011-05-05 15:47:12 +02:00
Jonas Hoerberg 2889471b58 at91rm9200-ek: add low default communication speed 2011-05-05 15:43:37 +02:00
Alexandre Pereira da Silva 522d5b84e2 Add support for the lpc2460 target 2011-05-03 22:07:01 +02:00
Alexandre Pereira da Silva 743fada06a Make the lpc2xxx generic driver support romless parts 2011-05-03 22:06:57 +02:00
Michel Jaouen d2911627d2 u8500.cfg : ste u8500 support 2011-04-28 12:22:47 +02:00
Luca Ellero 041953f3b1 Add preliminary support for Freescale iMX53
Signed-off-by: Luca Ellero <lroluk@gmail.com>
2011-04-13 21:32:00 +02:00
Alexandre Pereira da Silva 5cc83a880a Add the REV A tap id to the LPC3250 configuration 2011-04-13 21:28:44 +02:00
Jean-Christophe PLAGNIOL-VILLARD d6027ca6a8 at91: add at91sam9263 chip register definition
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-09 19:19:36 +02:00
Jean-Christophe PLAGNIOL-VILLARD ba71e8c521 at91: add chip register definition and generic init support
for
 - pio
 - pmc
 - rstc
 - wdt
 - sdramc
 - smc

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-09 19:18:03 +02:00
Jean-Christophe PLAGNIOL-VILLARD 28e6dcee85 add at91sam9263-ek support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-09 10:16:28 +02:00
Jean-Christophe PLAGNIOL-VILLARD 22437fac28 add at91sam9261-ek support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-09 10:14:46 +02:00
Jean-Christophe PLAGNIOL-VILLARD 5d538084be at91: add at91sam9261 chip register definition
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-09 10:13:59 +02:00
Øyvind Harboe 3fea99097e pandaboard: use new -dbgbase option to workaround broken ROM table
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-04-02 09:00:01 +02:00
Øyvind Harboe 6c5e1781a1 omap4430: cortex a9 and a8 are now merged again
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-22 09:10:21 +01:00
Aaron Carroll 59a6380a17 omap4430: add Blaze config
Signed-off-by: Aaron Carroll <aaronc@ok-labs.com>
2011-03-13 14:59:39 +01:00
Aaron Carroll cc9939879c omap4430: force hardware breakpoints for GDB
Soft breakpoints are currently broken if the MMU is enabled due to incorrect
cache flushing.  Until this is fixed, force the use of hardware breakpoints.

Signed-off-by: Aaron Carroll <aaronc@ok-labs.com>
2011-03-13 14:58:57 +01:00
Jean-Christophe PLAGNIOL-VILLARD df500c5a04 at91: add at91sam9g45 support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03 22:49:47 +01:00
Jean-Christophe PLAGNIOL-VILLARD a4bf71386b at91: add at91sam9g10 support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03 22:49:47 +01:00
Jean-Christophe PLAGNIOL-VILLARD aebc0d5556 at91sam9260: update sram information
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03 22:49:47 +01:00
Jean-Christophe PLAGNIOL-VILLARD f6783d4465 at91: add at91sam9263 support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03 22:49:47 +01:00
Jean-Christophe PLAGNIOL-VILLARD 26db0a6bef at91: add at91sam9261 support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03 22:49:46 +01:00
Jean-Christophe PLAGNIOL-VILLARD e941805713 at91sam9: factorise cpu support
all at91sam9 are nearly the same except sram and soc name

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03 22:49:46 +01:00
Jean-Christophe PLAGNIOL-VILLARD f26cd96740 add at91rm9200-ek board support
tested with jlink sam-ice v5 while loading barebox

(gdb) load
Loading section .text, size 0x2f190 lma 0x21f00000
Loading section .rodata, size 0x931c lma 0x21f2f190
Loading section .data, size 0x29e8 lma 0x21f384ac
Loading section .barebox_cmd, size 0x78c lma 0x21f3ae94
Loading section .barebox_initcalls, size 0x80 lma 0x21f3b620
Start address 0x21f00000, load size 243360
Transfer rate: 26 KB/sec, 13520 bytes/write.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-02-23 08:13:59 +01:00
Luca Ellero 578294dbdd stm32: add ID for medium density device Rev Z
stm32-discovery evaluation board (STM32F100RBTB6):
reading device id register (0xE0042000) returns 0x10010420

Signed-off-by: Luca Ellero <lroluk@gmail.com>
2011-02-18 08:08:31 +01:00
Luca Ellero 6684b35346 omap4430: Add JRC TAPID for PandaBoard REV EA1 (PEAP platforms)
PandaBoard REV EA1 (Panda Early Adopter Program) has a different ID.
This patch add alternate REV EA1 TAP id to configuration file

Signed-off-by: Luca Ellero <lroluk@gmail.com>
2011-02-08 09:51:54 +01:00
Aaron Carroll aaf145c422 omap4430: fix reset sequence
* Write to the PRM reset control register should have been 'phys';
* Setup empty reset-assert handlers for the M3's, since the board-level reset
  takes care of them;
* Remove the dbginit cruft, because it gets called implicitly on reset.

Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-02-02 08:32:10 +01:00
Aaron Carroll 4592506b8e TCL configs for OMAP4430 and Pandaboard
Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31 08:57:50 +01:00
Mathias K 6df10184f6 - add xds100v2 configuaration file
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-27 10:32:39 +00:00
Freddie Chopin 61e1e525c1 Add another level of procedures to LPC2xxx initialization - procedures for specific targets (setup_lpc<number>) take core clock and adapter clock as parameters. This way "constant" parameters (flash size and type, CPUTAPID, etc.) do not need to be copied if one wishes to change the "variable" parameters - like the core clock or adapter clock - in a board config file or somewhere else.
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2011-01-09 21:34:02 +01:00
Freddie Chopin 94fa8fd30a Add common LPC2xxx setup procedure, use in all LPC2xxx files.
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2011-01-07 16:09:31 +01:00
Michael Schwingen 1795239cfd actux3.cfg: add function to setup for u-boot debugging
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-01-02 21:17:57 +01:00
Spencer Oliver 3d834bdab7 stm32: add stm32 xl family flash support
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-23 12:11:14 +00:00
Øyvind Harboe 8b41812da3 lpc2148: redo to the new target configuration scheme
Define a proc which PCBs can easily override.

Also demonstrates how to add multiple TAP exepcted-id's
using arguments.

Added 0x3f0f0f0f as expected TAP-id. Old LPC2148 silicon
I happened to have on my desk?

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-12-22 17:44:22 +01:00
Tormod Volden 29d2d15f3f tcl/interface/flashlink.cfg: Fix broken ST URL 2010-12-20 07:52:29 +01:00
Tormod Volden d33f4a2ad5 tcl/board: Clean up STM32 EVAL boards configurations
Make consistent use of hex memory size for flashing.

Delete stm32f10x_128k_eval.cfg. It has no product reference
nor any settings in it.
2010-12-20 07:52:28 +01:00
Tormod Volden 9f18afc39e tcl/board: Fix ST URLs in stm32* eval board configuration files
ST recently rewamped (screwed up) their web site and broke all links.
Also match the chip names with those on the web site product
descriptions.
2010-12-20 07:52:26 +01:00
Michael Schwingen 23bf724e04 update IXP42x target / XBA board config 2010-12-19 22:16:31 +01:00
Michael Trensch 6839618062 Add support for Hilscher netX controllers 2010-12-18 21:11:57 +01:00
Antonio Borneo 30da7c67ce TCL: fix non TCL comments
End of line comments fixed with ';' before '#'.
Added few additional 'space' to keep indentation in
multi-line comments.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-12-18 21:04:22 +01:00
Spencer Oliver c6e07051e6 stm32: add STM32E-EVAL external memory config script
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-10 13:36:10 +00:00
Freddie Chopin 4bd2b30d5b remove srst_pulls_trst from LPC2xxx target scripts
LPC2xxx do not require reset_config srst_pulls_trst. This can cause various "strange" problems when flashing the chip, because "reset halt" actually allows the chip to run for some short period of time and execute some code.

Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2010-12-09 22:54:31 +01:00
Rolf Meeser 6ef4e97779 lpc2478 target config: CCLK as (mandatory) parameter 2010-12-05 13:37:57 +01:00
Rolf Meeser 81790fb56a Add board config for Embedded Artists LPC2478-32 2010-12-04 09:36:47 +01:00
Rolf Meeser bd9d2468cb Fix flash name in Hitex LPC2929 board config 2010-12-04 09:36:17 +01:00
Spencer Oliver 0ac6c0d1a8 stm32: set default soft reset config
If no srst is configured then default to using sysresetreq to
reset the target.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-03 09:02:10 +00:00
Spencer Oliver 7b2687b45b luminary: remove unused config cmds.
Due to commit e40aee2954d2beabe1d8c530d9ff1e564fb01f48 we now honour the
targets 'reset_config' setting. Previously we ignored the srst setting
for luminary targets.

Luminary targets have never supported using srst to reset into debug mode
so remove the option from the target configs files.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-03 09:02:08 +00:00
Spencer Oliver c24087d33e config: fix luminary jtag config
When this config was updated in commit e3773e3e3d
the old jtag declaration was not removed.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-02 22:01:44 +00:00
Freddie Chopin a1ce28b118 rename some target scripts to be consistent with the rest
Rename Atmel target scripts which had wrong name ("at91" missing for ARM7 AT91SAM7..., "at" missing for AVR ATmega...)

Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2010-12-02 18:53:03 +01:00
Piotr Esden-Tempski 94e1445a86 Added support for the blinking leds on Floss-JTAG v0.3 and newer. 2010-11-30 08:15:19 +01:00
Piotr Esden-Tempski a9d0b3de44 Updated Floss-JTAG config file to support v0.3 and newer. Also added noeeprom version of the config file for older versions of Floss-JTAG. 2010-11-30 08:15:19 +01:00
Antonio Borneo 42082f7c23 FLASH/NOR: rename from spearsmi to stmsmi
STMicroelectronics controller SMI is not SPEAr specific.
Rename it and change name to every symbol in the code.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-23 08:37:34 +01:00
Antonio Borneo 4bbdf966d4 STR750: Add SMI interface support
Modified spearsmi driver to include support for STR75x
Added missing initialization in tcl file for STR750

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-23 08:37:31 +01:00
Antonio Borneo 09c798a144 TCL/SPEAr: Added Serial flash in board file
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-16 09:16:15 +01:00
Antonio Borneo e7b2958229 TCL scripts: replace "puts" with "echo"
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-09 08:12:51 +01:00
Andrew Leech fc4cbc0f98 lpc3131: target definition 2010-11-09 08:05:55 +01:00
Antonio Borneo 074498f836 TCL scripts: add support for ST SPEAr310
Initial support for ST SPEAr310 and for the evaluation
board EVALSPEAr310 Rev. 2.0.
Scripts are split in generic for SPEAr3xx family and
specific for SPEAr310. This should easily allow adding
new members of the family.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-06 15:40:52 +01:00
Marek Vasut 8f1f8e7b96 Add EfikaMX smarttop board support
This patch finally adds support for i.MX51 based Genesi USA EfikaMX smarttop
board.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-11-05 11:25:57 +01:00
Marek Vasut d5b9c7998c CortexA8: Introduce Freescale i.MX51 variant
This patch introduces support for Cortex A8 based Freescale i.MX51 CPU. This CPU
has the Debug Access Port located at a different address (0x60008000) than TI
OMAP3 series of CPUs.

i.MX51 configuration file based on OMAP3 configuration file and an email from
Alan Carvalho de Assis <acassis@gmail.com>.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-11-05 11:25:57 +01:00
Øyvind Harboe 53228fbc2e imx31pdk: use rclk w/1MHz fallback
measure_clk indicates ca. 3-4MHz, so 1MHz should be safe.

Added self_test proc used to test that rclk worked.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-28 08:43:04 +02:00
Peter Stuge f176278e98 Make systesetreq typos read sysresetreq instead
Signed-off-by: Peter Stuge <peter@stuge.se>
2010-10-25 08:05:23 +02:00
Peter Stuge e7d26173fc Remove srst_pulls_trst from LPC1768 target
srst_pulls_trst may be true on some (broken) LPC1768 boards but is
not true in general for the LPC1768.

Signed-off-by: Peter Stuge <peter@stuge.se>
2010-10-25 08:04:58 +02:00
David Brownell e3773e3e3d swj-dp.tcl (SWD infrastructure #1)
Provide new helper proc that can set up either an SWD or JTAG DAP
based on the transport which is in use -- mostly for SWJ-DP.

 Also update some SWJ-DP based chips/targets to use it.  The goal
is making SWD-vs-JTAG transparent in most places.  SWJ-DP based chips
really need this flexible configuration to cope with debug adapters
that support different transports, without needing new target configs
for each transport or adapter.

For JTAG-DP, callers will use "jtag newtap" directly, as today; only
one chip-level transport option exists.

For SW-DP (e.g. LPC1[13]xx or EFM32, they'll use "swd newdap" directly
(part of an upcoming SWD transport patch).  Again, only one transport
option exists, so hard-wiring is appropriate there.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-10-10 14:41:11 -07:00
Antonio Borneo ecad76061f TCL scripts: fix ocd_mem2array/mem2array
In previous patch, I have introduced again the symbol
"ocd_mem2array", now replaced by "mem2array".
Fix the error.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-09-28 10:44:50 +02:00
Zachary T Welch 3bb4a6ba14 Fix omap3_dbginit to write to physical memory.
Setting the OMAP3530 DBGEN bit must be done in physical memory, so
update omap3_dbginit callback to use the new 'mww phys' command syntax.
2010-09-26 17:45:58 -07:00
Antonio Borneo edefee9880 TCL scripts: collect duplicated procedures
TCL procedures mrw and mmw, originally in DaVinci target code,
are duplicated in other TCL scripts.
Moved in a common helper file, and added help/usage description.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-09-21 12:25:59 +02:00
Øyvind Harboe f613011aa0 tcl: remove incomplete unused tcl file
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-20 09:23:42 +02:00
Karl Kurbjun 60501bb0fb AM/DM37x: Unify configuration scripts and add support for TI Beagleboard xM. 2010-09-20 09:17:28 +02:00
Takács Áron 1b0f194d90 board scripts: Marvell PXA270M processor has a new TAPID: 0x89265013
the new Marvell PXA270M processor has a new TAPID: 0x89265013.
Attached you will find a patch for target/pxa270.cfg that will handle this.

I have also attached a board/colibri.cfg file to support the Colibri
PXA270 module by Toradex.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-14 11:15:35 +02:00
Spencer Oliver 3c69eee9ef cortex m3: add cortex_m3 reset_config cmd
This new cmd adds the ability to choose the Cortex-M3
reset method used.
It defaults to using SRST for reset if available otherwise
it falls back to using NVIC VECTRESET. This is known to work
on all cores.

Move any luminary specific reset handling to the stellaris cfg file.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-08-31 20:09:26 +01:00
Spencer Oliver 31b47688ca cfg: update Luminary config files
- Update all Luminary config's to use a common target/stellaris.cfg.
 - Add Luminary ek-lm3s6965 config.
 - Increase working area for boards with more ram.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-08-31 20:09:24 +01:00
Øyvind Harboe 5c98e063b9 imx35pdk: fix clock and reset delays
Use rclk and 100ms delay on ntrst

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-19 16:06:45 +02:00
Øyvind Harboe 2c4ef30b11 mcb1700: Keil MCB1700 w/1768 config script
Ca. 93kBytes/s flashing speed @ 10MHz JTAG clock

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-17 21:52:39 +02:00
David Brownell 962946ea89 update more Stellaris EK board comments
Using the bundled JTAG/SWD debug support in JTAG mode
is optional on *all* of the EK boards.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-08-16 08:25:37 -04:00
David Brownell 70794664f1 Update comments for some Stellaris EK boards.
These  don't need to use the on-board debuggers in JTAG mode.
Off-board is OK, as would be SWD mode.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-08-16 00:36:52 -04:00
Oleksandr Tymoshenko c54c323cf3 avr32: basic target script 2010-08-15 21:56:41 +02:00
David Brownell d23428a47f at32ap7000 config file
nice board to play with.
2010-08-15 21:54:01 +02:00
Øyvind Harboe f60a2390cc lpc1768: turn down the jtag clock
Tests should that it needs to be as low as 100kHz to be
stable.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-13 12:59:36 +02:00
Piotr Esden-Tempski 52ba344a09 Added Lisa/L script as a target board. 2010-08-13 09:52:31 +02:00
Piotr Esden-Tempski c3ee26d272 Added support for Lisa/L builtin JTAG interface. 2010-08-13 09:52:27 +02:00
Øyvind Harboe a72faf6405 at91cap7a-stk-sdram.cfg: faster reset
crank up JTAG speed as soon as clocks are set up.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-12 15:01:23 +02:00
Thomas Koeller 14a25cd6de DM36x: Set OSCDIV divider
The ability to set up the OSCDIV divider was missing.

Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
2010-08-12 08:59:04 +02:00
Thomas Koeller 4ed89e4e42 DM36x: Disable unused SYSCLKs
Clear the enable bits for all clocks that are not set explicitly.
This is done to increase robustness by removing pre-existing
state.

Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
2010-08-12 08:59:03 +02:00
Thomas Koeller 98d2579c61 DM36x: Use enable bit for PLL pre-divider
The PLL pre- and postdividers seem to have enable bits, although
these are not mentioned in the chip documentation.

Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
2010-08-12 08:59:02 +02:00
Øyvind Harboe 8f779cf66b tcl: remove silly ocd_ prefix to array2mem and mem2array
ocd_ prefix is used internally in OpenOCD as a kludge more
or less to deal with the two kinds of commands that OpenOCD
has.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-11 17:24:55 +02:00
Øyvind Harboe f1bd1274ee board: added at91cap7a stk w/sdram config scripts
The strange thing here with this board is that 16MHz kinda
works, but only 2MHz is really stable.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-11 17:09:44 +02:00
Øyvind Harboe ba951aede3 config scripts: remove useless reference to OpenOCD docs
clutters config scripts.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-11 10:53:54 +02:00
Ben Gardiner 91305bfa7f cfg: add omapl138 support and da850evm preliminary support
This patch adds support for the omapl138 target and preliminary support for the da850evm. The
target cfg file is based on the icepick routing done by the target/ti_dm6446.cfg file.

I have performed limited testing with this setup. I am posting this patch in the interest of
sharing cfg files and in the hopes that the experts on this list can correct errors I have made or
point out enhancements.

The testing I have performed is debugging uboot with gdb where I also use the following local.cfg
and gdbinit files. Debugging appears to work in so much as 'ni' works.

local.cfg:
gdb_memory_map disable

gdbinit:
target remote localhost:3333
set remote hardware-breakpoint-limit 2
set remote hardware-watchpoint-limit 2
monitor poll on

Comments welcome.

Best Regards,
Ben Gardiner
2010-08-10 09:43:30 +02:00
David Brownell 28ddefd065 Luminary-icdi comment update
Clarify that ICDI is the generic logic, but this config is
for the JTAG-only (no-SWD) mode.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-08-03 21:29:05 -04:00
Øyvind Harboe d1638abd6a lpc1768: even if rclk "works", it isn't necessarily the correct clk
rclk = 4MHz oon lpc1768, the correct JTAG clk is 666MHz(4MHz/6).

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-02 13:21:21 +02:00
Peter Stuge 8e9b12dc8a Support NGX Technologies product NGX ARM USB JTAG
This is a standard FT2232 device. More info at their web page:
http://shop.ngxtechnologies.com/product_info.php?cPath=26&products_id=30
2010-08-01 09:10:47 +02:00
Peter Stuge 8772355bbd Remove srst_pulls_trst from LPC2148 target
srst_pulls_trst is only true on some (broken) LPC2148 boards, a fact
which is already documented in doc/openocd.texi, so it shouldn't be
set unconditionally in the target tcl.

This patch was needed to reflash when an Abort exception occured very
early after reset, before OpenOCD tried to halt the CPU.
2010-08-01 09:10:47 +02:00
Øyvind Harboe f4c1f08f16 lpc7168: make flash available upon reset init
set user mode to avoid ROM being mapped at address
0 rather than flash.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-07-30 22:36:00 +02:00
Spencer Oliver 8dbe367c53 cfg: add Amontec JTAGkey2p interface config (Issue #26)
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-07-19 17:31:38 +01:00
Spencer Oliver 4611f87f0a flash: add nuc910 nand driver
This adds a nand driver support for the nuc910 target.
Note that ECC is not currently supported by this driver, although
it is supported by the peripheral.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-07-19 12:22:18 +01:00
Spencer Oliver 8f5e84bf8d cfg: update rsc-w910 script
- Only enable the FMI (NAND) and DMA clocks.
 - Select NAND interface on the MFSEL.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-07-19 09:10:54 +01:00
David Brownell 2fdc1db304 lm3s811-ek uses generic stellaris target config
There's no point in an lm3s811-specific target file,
so remove it in favor of the generic "stellaris.cfg".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-07-17 02:59:23 -04:00
Spencer Oliver 1619facb5e cfg: add Avalue RSC-W910 config
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-07-13 14:17:00 +01:00
Olaf Lüke 2986320cde at91sam3s* support
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-25 21:37:53 +02:00
Øyvind Harboe 4fa3cc7746 am3517 evm: use physical write to memory while target is running
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-22 12:49:56 +02:00
Øyvind Harboe fe1f7f63b6 board: add alpha am3517evm ti board config file
Signs of life: reset(kinda), halt, resume and memory
display/modify.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-22 08:22:01 +02:00
Thomas Koeller c9e2d13cf9 DM36x: pll & clock setup
Added a function 'pll_v03_setup' to set up PLLs and clock
dividers on DM365 and DM368.

Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-15 10:40:05 +02:00
michal smulski bf3410fcc7 arm1136 scripts
Here is a patch to fix a startup in C100 (arm1136). Basically make sure
that UART is configured before using it.

Michal

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-15 07:39:59 +02:00
Spencer Oliver 94dc7c0a93 cfg: add pic32 virtual banks
make use of the new virtual bank flash driver.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-26 11:10:15 +01:00
Freddie Chopin f1c1bed39a There are no variants of arm7tdmi target
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-24 09:21:40 +01:00
Freddie Chopin e2c9518eda All LPC2xxx chips are little endian and that cannot be changed - update config scripts
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-24 09:21:30 +01:00
Freddie Chopin 9c3b4cfc5d add correct CPUTAPID value for LPC2129
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-24 09:21:18 +01:00
Freddie Chopin 0e4f4bacdc Update "flash bank" helper comments for LPC2xxx chips
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-24 09:21:08 +01:00
Freddie Chopin 06df4664a9 LPC23xx and LPC24xx after reset run on internal 4MHz RC oscillator, so "flash bank" parameter should be 4000 (not 12000)
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-24 09:20:43 +01:00
Øyvind Harboe 2e1eaaae35 at91sam9260: use RCLK
It might be possible to get this target going without
RCLK, but it would require more careful analysis and
usage of the reset events.

Enable fast memory accesses.

Tested on an at91sam9260 custom board w/external DRAM
and flash.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-21 14:00:11 +02:00
Spencer Oliver 82ef8472bf cfg: update stm32 performance stick config
- As this is a complete unit, including jtag we might as welli nclude
the jtag cfg.
 - Add missing id for the str750 that is also in the jtag chain.
 - Reduce jtag startup speed to 500kHz.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-21 11:45:40 +01:00
Jon Povey 72ba8ec90e board: dm355evm.cfg SDTIMR0/1 minor naming fix
Register name fix; ref. TI document sprueh7d

Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-21 07:31:40 +02:00
Gary Carlson 8465e99442 reset: fix reset halt bug
I was finally able to figure out the cause of this problem.  There are two
parts to the patch.  The first patch modifies the configuration file I
originally generated for the Atmel AT91SAM9G20 board and achieves the
following:

+++ Splits the reset-init handler into a reset-start handler for some of the
initial configuration activities and keeps the remainder in the reset-init
handler as was the case before.  This was the real issue that was causing
the timing problems I identified before.  This solution was confirmed with
an o-scope on actual target hardware.

+++ Adds a new instruction in the reset-start handler to disable fast memory
accesses in the reset-start handler.  When the target jtag clock is started
out at 2 kHz during system clock initialization, memory writes (i.e.
register write to enable external reset pin -- basically to RSTC_MR) are
naturally slow and cause GDB keep-alive issues (refer to PATCH 2/2 for
additional fixes).

+++ Modifies the configuration file to use srst_only reset action. The
reset-start/reset-init handler split also now allows the correct behavior to
be used in the configuration file (previously had to use both SRST and TRST
even though only SRST is actually used and connected on the evaluation
board).

+++ Adds external NandFlash configuration support to take advantage of flash
driver added earlier.  Doesn't fix any bugs but adds functionality that was
marked as TBD before and thrown in when I did other work on the
configuration file.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-19 07:37:07 +02:00
Marc Pignat e92b203a76 at91rm9200 : reset_config should go to the board config file
Let other boards do other things with srst and trst.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-18 11:48:47 +02:00
Spencer Oliver 215a5f7442 scripts: update flash bank names
As the flash bank name is now unique update the scripts to suit.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-13 20:44:08 +01:00
Øyvind Harboe 7b76da57f4 zy1000.cfg: gdb connect will fail first time without gdb-attach
gdb-attach does a reset init to make sure that the CFI probe
will succeed upon first gdb connect.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-12 13:45:04 +02:00
Spencer Oliver cf811d8e6b cfg: add stm32eval board configs
Increase working area for stm3210e_eval.cfg.
Add new configs for the following boards:
STM321000B-EVAL, STM32100C-EVAL, STM32100B-EVAL

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-07 14:24:13 +01:00
Øyvind Harboe da9f72ca0a zy1000: it has a CFI chip, no need for the ecosflash driver
The ecosflash driver is no longer used by any of the config
scripts. It is more useful to get more testing of CFI.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-04-30 02:51:05 +02:00
Marek Vasut 56a21c9cb1 Add Voipac PXA270 module support
This patch adds support for the Voipac PXA270 module. Including NOR flash.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-04-26 07:08:55 +02:00
Marek Vasut e0285dbe73 Add VPACLink interface definition
This patch adds definition file for the Voipac VPACLink JTAG adaptor. The
adaptor is combined JTAG/UART device.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-04-26 07:08:52 +02:00
michal smulski c6cd253ae1 telo: update configuration scripts to matched master branch
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-04-24 16:51:34 +02:00
Antonio Borneo d31bbc33fa TCL SCRIPTS: fix command name
Some tcl script has underline between the words "flash bank"
resulting in 'invalid command name "flash_bank"'.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-04-15 19:10:36 +02:00
Antonio Borneo 27b98c2fa5 TCL scripts: update to current "flash bank" syntax
While "flash bank" syntax has been changed long ago,
several tcl script are still not fully update.

Fix following cases related with "cfi" driver:
- syntax error: the mandatory <name> parameter is missing
- warning: the <target> parameter is a number, instead of
  the target name
- the comment line above the command does not report
  actual syntax

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-03-26 08:42:58 +01:00
Spencer Oliver 679f6602fd PARPORT: add PARPORTADDR tcl variable
Add PARPORTADDR tcl variable making it easier to
change parallel port address in scripts.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-03-16 10:10:21 +00:00
Spencer Oliver 82f44a4708 PIC32: add Microchip Explorer16 cfg
- add Microchip Explorer16 cfg using PIC32MX360F512L PIM.
 - remove reset config from PIC32 target cfg.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-03-16 10:10:20 +00:00
David Brownell 1bd3ae3986 rename jtag_nsrst_assert_width as adapter_nsrst_assert_width
Globally rename "jtag_nsrst_assert_width" as "adapter_nsrst_assert_width",
and move it out of the "jtag" command group ...  it needs to be used with
non-JTAG transports

Includes a migration aid (in jtag/startup.tcl) so that old user scripts
won't break.  That aid should Sunset in about a year.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 08:42:26 -07:00
David Brownell b559b273b5 rename jtag_nsrst_delay as adapter_nsrst_delay
Globally rename "jtag_nsrst_delay" as "adapter_nsrst_delay", and move it
out of the "jtag" command group ...  it needs to be used with non-JTAG
transports

Includes a migration aid (in jtag/startup.tcl) so that old user scripts
won't break.  That aid should Sunset in about a year.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 08:41:30 -07:00
David Brownell 96f9790279 rename jtag_khz as adapter_khz
Globally rename "jtag_khz" as "adapter_khz", and move it out of the "jtag"
command group ...  it needs to be used with non-JTAG transports

Includes a migration aid (in jtag/startup.tcl) so that old user scripts
won't break.  That aid should Sunset in about a year.  (We may want to
update it to include a nag message too.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-15 08:37:43 -07:00
Spencer Oliver de761e350b PIC32MX: update cfg script
The default config script will now dynamically setup the BMX registers
in the reset init script.
This will also work if the user overrides the default working area.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-03-15 09:38:46 +00:00
Michal Demin 24e1e3dd26 Add support for Bus Pirate as a JTAG adapter.
This includes a driver and matching config file.  This support needs to be
enabled through the initial "configure" (use "--enable-buspirate").

Signed-off-by: Michal Demin <michaldemin@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-11 11:35:50 -08:00
Spencer Oliver 257a764582 PIC32: add flash algorithm support
Add flash algorithm support for the PIC32MX.
Still a few things todo but this dramatically decreases
the programing time, eg. approx programming for 2.5k test file.
 - without fastload: 60secs
 - with fastload: 45secs
 - with fastload and algorithm: 2secs.

Add new devices to supported list.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-03-10 21:03:22 +00:00
David Brownell c6e323b983 doc: not all debug adapters are "dongles"
Talk more about "debug adapters" instead of only "dongles".  Not all
adapters are discrete widgets; some are integrated onto boards.  If
we only talk about "dongles" we rule out many valid setups, and help
confuse some users (who may be using Dongle-free environments).

Also start bringing out the point that JTAG isn't the only transport
protocol, even though OpenOCD historically presumes "all is JTAG".
(Not all debug adapters are JTAG adapters, or JTAG-only adapters.)

Plus a few minor fixes (spelling etc) in the vicinity of those changes,
and updates about FT2232H clocking issues (they can go faster than the
older chips, and can support adaptive clocking).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-05 21:09:03 -08:00
David Brownell 53b3d4dd53 LPC1768 updates, IAR board support
Fix some issues with the generic LPC1768 config file:

 - Handle the post-reset clock config:  4 MHz internal RC, no PLL.
   This affects flash and JTAG clocking.

 - Remove JTAG adapter config; they don't all support trst_and_srst

 - Remove the rest of the bogus "reset-init" event handler.

 - Allow explicit CCLK configuration, instead of assuming 12 MHz;
   some boards will use 100 Mhz (or the post-reset 4 MHz).

 - Simplify: rely on defaults for endianness and IR-Capture value

 - Update some comments too

Build on those fixes to make a trivial config for the IAR LPC1768
kickstart board (by Olimex) start working.

Also, add doxygen to the lpc2000 flash driver, primarily to note a
configuration problem with driver: it wrongly assumes the core clock
rate never changes.  Configs that are safe for updating flash after
"reset halt" will thus often be unsafe later ... e.g. for LPC1768,
after switching to use PLL0 at 100 MHz.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-03-02 15:02:01 -08:00
Mariano Alvira 0324eb2496 Add board/redbee-usb.cfg
The Redbee USB is a small form-factor usb stick from Redwire, LLC
(www.redwirellc.com/store), built around a Freescale MC13224V
ARM7TDMI + 802.15.4 radio (plus antenna).

It includes an FT2232H for debugging, with Channel B connected to the
mc13224v's JTAG interface (unusual) and Channel A connected to UART1.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-28 10:33:46 -08:00
Mariano Alvira 63763345d9 add board/redbee-econotag.cfg and JTAG support
The Redbee Econotag is an open hardware development kit from
Redwire, LLC (www.redwirellc.com/store), for the Freescale
MC13224V ARM7TDMI + 802.15.4 radio.

It includes both an MC13224V and an FT2232H (for JTAG and UART
support).  It has flexible power supply options.

Additional features are:

  - inverted-F pcb antenna
  - 36 GPIO brought out to 0.1" pin header
    (includes all peripheral pins)
  - Reset button
  - Two push buttons (on kbi1-5 and kbi0-4)
  - USB-A connector, powered from USB
  - up to 16V external input
  - pads for optional buck inductor
  - pads for optional 32.768kHz crystal
  - 2x LEDS on TX_ON and RX_ON

[ dbrownell@users.sourceforge.net: shrink lines; texi ]

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-27 22:52:34 -08:00
Mariano Alvira e4a40d257d Add target/mc13224v.cfg
The MC13224V is a FreeScale ARM7TDMI based IEEE802.15.4 platform for
Zigbee and similar low-power wireless applications. Using PIP
(Platform In Package) technology, it integrates: an RF balun and
matching network; a buck converter (only an external inductor is
necessary); 96KB of SRAM; and 128KB of non-volatile memory.

It has an integrated bootloader and can boot from a variety of sources:
external SPI or I2C non-volatile memory, an image loaded over UART1,
or the internal non-volatile memory. The image loaded from one of these
sources is executed directly from SRAM starting at location 0x00400000.

Open source development code at http://mc1322x.devl.org

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-27 22:51:41 -08:00
David Brownell 57d5673dea CSB337 board cleanup (quasi-regression)
Get rid of new nasty warning:

NOTE! Severe performance degradation without fast memory access enabled...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-20 20:47:38 -08:00
David Brownell 5869992314 LPC1768.cfg -- partial fixes for bogus reset-init handler
Cortex-M targets don't support ARM instructions.

Leave the NVIC.VTOR setup alone, but comment how the whole
routine looks like one big bug...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-15 13:39:16 -08:00
Viktar Palstsiuk 32188c5004 target library: configuration files for openocd tested with Atmel SAM-ICE V6 JTAG.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-02-11 21:10:51 +01:00
Spencer Oliver f899c2aa97 str730.cfg: fix incorrect mem regions
- update str73x mem regions to correct values.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-02-09 14:49:47 +00:00
Ethan Eade 8b049fdba5 scripts: Phytec/LPC2350 config scripts
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-02-04 10:25:44 +01:00
Harald Kipp 18969466c9 AT91R40008/Ethernut 3 configuration
Moved board specific settings from target/at91r40008.cfg to a new
file board/ethernut3.cfg.

Set correct CPUTAPID.  Reset delay increased, see MIC2775 data sheet.
Increased work area size from 16k to 128k.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-02 11:09:53 -08:00
Edgar Grimberg cc440ca1d4 tcl/str7x: Reset init unlocks the flash
For STR7x flash, the device cannot be queried for the protect status.
The solution is to remove the protection on reset init. The driver
also initialises the sector protect field to unprotected.

[dbrownell@users.sourceforge.net: line length shrinkage]

Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-02 09:30:33 -08:00
Edgar Grimberg 503f6139c7 flash/str7x: After reset init the flash is unlocked
The default state of the STR7 flash after a reset init is unlocked.
The information in the flash driver now reflects this.

The information about the lock status cannot be read from the
flash chip, so the user is informed that flash info might not
contain accurate information.

[dbrownell@users.sourceforge.net: line length shrinkage]

Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-02-02 09:30:33 -08:00
Edgar Grimberg dfba7fa949 interface: Changed parport address to LPT1
Changed the parport address to LPT1, since it's the most obvious default value.

Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
2010-01-21 15:58:59 +01:00
David Brownell 22d25e6921 board configs -- unique names for flash chips
Don't give the same names to both flash chips on two OMAP boards.

For OSK, enable DCC downloads (removing a warning).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-20 10:46:53 -08:00
Michael Grzeschik d036f17001 tcl/target/at91sam3u4e.cfg: changed case in dependent file
openocd does not start with the target configfile due to the case in the
dependent config file.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-20 10:32:53 -08:00
Vladimir Zapolskiy 1de107a5a2 Added Openmoko USB JTAG interface config file.
Added interface config file for JTAG/RS232 debug board originally
integrated to Neo 1973 and Neo FreeRunner phones.
Adapter was tested with i.MX31, S3C2410 and AT91SAM9260 processors.

Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
2010-01-11 15:58:13 +01:00
David Brownell ff647e6bb4 parport (mostly) doc fixes
The "parport_port" commands generally don't *require* a port_number;
they're of the "apply any parameter, then print result" variety.  Update
the User's Guide accordingly.

Some of those commands are intended to be write-once: parport_port,
and parport_cable.  Say so.

Use proper EBNF for the parport_write_on_exit parameter.

Parport address 0xc8b8 is evidently mutant.  Say so in the "parport.cfg"
file, to avoid breaking anyone with that mutant config.  But update the
User's Guide to include a sane example for the LP2 port.

Finally document the "presto_serial" command.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-09 21:56:11 -08:00
Spencer Oliver ba96fc3e9d PIC32: enable ram execution
add reset-init script to allow ram execution from reset, this is required for ejtag fastdata access.

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-01-05 19:54:37 +00:00
Antonio Borneo 668f20d0ab Added ST FlashLINK interface config file.
The relevant cable config is already in OpenOCD, but not a config for
the JTAG adapter.  I have tested with FlashLINK on ARM926.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-02 01:50:57 -08:00
Antonio Borneo c116d8f6bc Fix parport_dcl5 config file.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2009-12-30 19:07:44 +01:00
Piotr Esden-Tempski d4bef466c3 Added Open-BLDC board config file. 2009-12-29 12:41:43 +01:00
Piotr Esden-Tempski aa81462618 Added floss-jtag interface config file. 2009-12-29 12:41:43 +01:00
David Brownell ec297e4bf1 Fix Luminary FT2232 layout docs/configs
Most of this patch updates documentation and comments for various
Luminary boards, supporting two bug fixes by helping to make sense
of the current mess:

 - Recent rev C lm3s811 eval boards didn't work.  They must use
   the ICDI layout, which sets up some signals that the older
   boards didn't need.  This is actually safe and appropriate
   for *all* recent boards ... so just make "luminary.cfg" use
   the ICDI layout.

 - "luminary-lm3s811.cfg", was previously unusable!  No VID/PID;
   and the wrong vendor string.  Make it work, but reserve it
   for older boards where the ICDI layout is wrong.

 - Default the LM3748 eval board to "luminary.cfg", like the
   other boards.  If someone uses an external JTAG adapter, all
   boards will use the same workaround (override that default).

The difference between the two FT2232 layouts is that eventually
the EVB layout will fail cleanly when asked to enable SWO trace,
but the ICDI layout will as cleanly be able to enable it.  Folk
using "luminary.cfg" with Rev B boards won't see anything going
wrong until SWO support is (someday) added.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-28 12:59:47 -08:00
David Brownell 3ace333663 create tcl/board/dm365evm.cfg
This config is only lightly tested, and doesn't work well yet;
but it's a start.

 * Notably missing is PLL configuration, since each DaVinci
   does that just a bit differently; and thus DDR2 setup.

 * The SRST workaround needed for the goof in the CPLD's VHDL
   depends on at least the not-yet-merged patch letting ARM9
   (and ARM7) chips perform resets that don't use SRST.

So this isn't yet suitable for debugging U-Boot.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-27 12:16:55 -08:00
Catalin Patulea 84dbf8ab5a Driver for USB-JTAG, Altera USB-Blaster and compatibles
The 10-pin JTAG layout used with these adapters is used by
a variety of platforms including AVR.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-26 15:05:06 -08:00
Dean Glazeski 900d745567 Olimex SAM9-L9260 board configuration update.
This updates the board configuration for the SAM9-L9260 board with the
configuration for the on-board NAND and dataflash.  Included are commands
for configuring the AT91SAM9 NAND flash driver.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-26 13:08:24 -08:00
Spencer Oliver 3616b93eee target.cfg: update to use new flash configuration syntax
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2009-12-17 11:39:09 +00:00
David Brownell 960ad2f776 Remove duplicate Olimex-"tiny" interface
We already have tcl/interface/olimex-jtag-tiny.cfg and
don't need a clone of it.
2009-12-16 14:21:06 -08:00
David Brownell 4a2f4e3433 more tcl/{board,target} cleanup
Remove more remnants of the old "jtag_device" syntax.

Don't [format "%s.cpu" $_CHIPNAME] ... it's needless complexity.

Remove various non-supported "-variant" target options; they're not
needed often at all.

Flag some of the board files as needing to have and use target files
for the TAP and target declarations.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-15 14:45:26 -08:00
David Brownell 80a757d82e testing/examples/.../*cfg: rm jtag_device calls
That syntax has been obsolete forever and is now gone; remove a few
remaining references.  Shows how seldom this stuff gets used.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-15 14:45:26 -08:00
mkdorg@users.sourceforge.net 646ce814b4 target: add basic dsp563xx support 2009-12-15 18:38:52 +01:00
Øyvind Harboe d6aff79f1a imx31: move srst delay into config script
reset init/run now works again.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-12-15 07:55:20 +01:00
David Brownell c86a64dff7 lm3748: use new Stellaris config file
Use the new file, and remove the old target/lm3s3748.cfg one.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-14 16:29:53 -08:00
Yegor Yefremov a1009509fb Common target file for Stellaris chips
Common target.cfg file for LM3S CPU family

[dbrownell@users.sourceforge.net: rename, generalize more]

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-14 16:29:31 -08:00
David Brownell ecd709fa55 OMAP2420: define reset-assert event
Behave like OMAP3530:  force global software reset.  Given the
patch to teach ARM11 how to use these events, and use VCR to
catch the reset vector, this works better than either the
current reset logic or than using SRST.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-07 14:57:43 -08:00
David Brownell a65e75ea34 Tcl and doc: update to match new 'arm mcr ...' etc
Make them match the C code.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-01 01:10:19 -08:00
Øyvind Harboe 48edd58c39 target: at91eb40a.cfg is a board, not a target.
Also updated to use target name when creating flash
and set jtag_khz to 16000.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-12-01 10:06:40 +01:00
Marek Vasut 8c2846ed45 create target/pxa3xx.cfg
[dbrownell@users.sourceforge.net; remove pxa255 comment]

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-29 12:57:05 -08:00
David Brownell ddce517e3a omap3530.cfg: use new "reset-assert" event
Replaces previous "reset-assert-pre" workaround.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-27 18:50:31 -08:00
David Brownell ac06d41fc7 omap3530.cfg: yes we have SRAM!
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-25 16:19:53 -08:00
Øyvind Harboe 828d006a9d arm926ejs: fix gaffe when converting from arm926ejs cp15 to mcr
the first arg is the register number 15 = cp15.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-11-23 18:23:10 +01:00
Øyvind Harboe eeb4276deb arm926ejs: retire cp15 commands, handled by mrc/mcr.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-11-23 14:02:03 +01:00
David Brownell 7b77b3c5d1 target.cfg: TAP id for Hilscher netX 500
Based on email from "Martin Kaul <martin.kaul@leuze.de>".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-20 12:21:00 -08:00
Zachary T Welch 3e1f5e7c64 update 'nand device' usage in scripts
Add $_FLASHNAME variable to update 'nand device' command syntax.
2009-11-19 13:39:41 -08:00
Zachary T Welch 2dfa5e9c84 update 'flash bank' usage in scripts
Sets $_FLASHNAME to "$_CHIPNAME.flash" and passes it as the
first argument to 'flash bank'.
2009-11-19 13:39:41 -08:00
David Brownell f86137066a ARM: "armv4_5" command prefix becomes "arm"
Rename the "armv4_5" command prefix to straight "arm" so it makes
more sense for newer cores.  Add a simple compatibility script.

Make sure all the commands give the same "not an ARM" diagnostic
message (and fail properly) when called against non-ARM targets.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-16 16:36:09 -08:00
David Brownell ecab0cfe25 ARM11: ETM + ETB support
Kick in ETM (and ETB) support for ARM11.  Tested on OMAP 2420,
so update that configuration.  (That's an ARM1136ejs, ETB,
OpenGL ES1.1, C55x DSP, etc.)

Also update the other ARM11 ETM + ETB targets in the tree
to set up these modules.  (Not tested.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-13 16:58:14 -08:00
David Brownell 44d6a531f7 iMX2* + ETB targets: hook up ETM and ETB
ARM9 cores with an ETB will have a matching ETM.
Hook them both up by default.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-13 16:56:11 -08:00
David Brownell 38e8d60f79 target.cfg: label ETBs correctly
Various cores with an ETB have its TAP misnamed ... either as a
boundary scan TAP or as the iMX "Secure JTAG Controller" (which
is, among other things, a JRC that could be used to shorten
scan chains).

Use the correct name for these TAPs, which we can recognize since
their IDs were assigned by ARM and these chips all document the
presence of an ETB.  The 0x2b900f0f is ETB11; the 0x1b900f0f
is an older module, just called "ETB".

Also shrink the ETB's IR configuration; the default IR-Capture
value is fine, and the mask can specify that all four bits are
safe to check (per ARM documentation).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-13 13:44:50 -08:00
David Brownell 6881c1b6d6 target.cfg: (re)move some bogus reset_config lines
General rule, this is all board-specific and doesn't belong
in target config files.  Some of these were just cosmetic.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-10 09:25:26 -08:00
Thomas Kindler 85944d4144 stm32.cfg: remove reset_config
Here's a patch for the double-reset problem on STM32.  I've tested
downloading and debugging with GDB and Eclipse, and everything seems
to work fine.

This effectively sets reset_config to none. trst_only would also
be ok, but that's better left to a board configuration file since
not all boards wire it up.

The NVIC is used to trigger reset, which at least on this chip also
pulses nSRST so the whole system does get rest -- exactly once.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-10 09:16:12 -08:00
Øyvind Harboe c202ba7d34 ARM11: remove old mrc/mcr commands
Switch to new commands in config scripts

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-11-10 13:13:13 +01:00
Øyvind Harboe 1f357869c1 telo.cfg: fix search paths
Add the missing "target/" prefix for scripts in the
target folder.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-11-10 13:11:17 +01:00
David Brownell d70d9634bf finish removing deprecated/obsolete commands
It's been about a year since these were deprecated and, in most
cases, removed.  There's no point in carrying that documentation,
or backwards compatibility for "jtag_device" and "jtag_speed",
around forever.  (Or a few remnants of obsolete code...)

Removed a few obsolete uses of "jtag_speed":

 - The Calao stuff hasn't worked since July 2008.  (Those Atmel
   targets need to work with a 32KHz core clock after reset until
   board-specific init-reset code sets up the PLL and enables a
   faster JTAg clock.)
 - Parport speed controls don't actually work (tops out at about
   1 MHz on typical HW).
 - In general, speed controls need to live in board.cfg files (or
   sometimes target.cfg files), not interface.cfg ...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-09 13:16:32 -08:00
David Brownell 3e6f9e8d1e target.cfg: remove "-work-area-virt 0"
The semantics of "-work-area-virt 0" (or phys) changed with
the patch to require specifying physical or virtrual work
area addresses.  Specifying zero was previously a NOP.  Now
it means that address zero is valid.

This patch addresses three related issues:

 - MMU-less processors should never specify work-area-virt;
   remove those specifications.  Such processors include
   ARM7TDMI, Cortex-M3, and ARM966.

 - MMU-equipped processors *can* specify work-area-virt...
   but zero won't be appropriate, except in mischievous
   contexts (which hide null pointer exceptions).

   Remove those specs from those processors too.  If any of
   those mappings is valid, someone will need to submit a
   patch adding it ... along with a comment saying what OS
   provides the mapping, and in which context.  Example,
   say "works with Linux 2.6.30+, in kernel mode".  (Note
   that ARM Linux doesn't map kernel memory to zero ...)

 - Clarify docs on that "-virt" and other work area stuff.

Seems to me work-area-virt is quite problematic; not every
operating system provides such static mappings; if they do,
they're not in every MMU context...

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-08 08:52:40 -08:00
Krzysztof Kajstura 2970696e89 JTAG: support KT-LINK adapter
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-04 21:20:44 -08:00
David Brownell fd108f5737 PXA255: support Intel "Lubbock" platform
Config for Intel's "Lubbock" PXA255 development board.  Even more
so than the PXA255 itself, this is obsolete.  AFAIK this was the
first generally available development platform for PXA255.  Intel
stopped providing these after other devel boards became available.

One interesting thing about this board from the OpenOCD perspective
is probably its flash configuration.  Each bank is 32 bits wide,
built from two 16-bit StrataFlash chips wired in parallel.  This
doubles throughput ... it reads/writes 32 bits in the time a single
chip takes to write just 16 bits.

This conf mostly works, given XScale bugfixes, but has some issues
(notably: no access to the on-board SDRAM) flagged by FIXMEs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-04 21:11:44 -08:00
Freddie Chopin 2120231afd remove "-ircapture 0x1 -irmask 0x1" from stm32.cfg
Gets rid of the runtime warning "stm32.bs: nonstandard IR mask"

[dbrownell@users.sourceforge.net: line lengths, note issue, section ref]

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-11-01 07:02:23 -08:00
Freddie Chopin 0da0bfd40a target.cfg: use $_TARGETNAME for flash
This gets rid of runtime warnings from the use of numbers.
STM32 and LPC2103 were tested.  Other LPC updates are the
same, and so are safe.  The CFI updates match other tested
changes now in the tree.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-31 11:13:10 -07:00
Dimitar Dimitrov 517049dca5 Olimex FT2232H JTAG adapters
Add interface configs for two new high speed JTAG
adapters from Olimex.  They need some other speed
related tweaks to work well at high speed.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-29 15:39:03 -07:00
Oleg Seiljus 993fe4ab63 Signalyzer: H2 and H4 support
This patch includes partial support for these new JTAG adapters.
More complete support will require updates to the libftdi code,
for EEPROM access.

[dbrownell@users.sourceforge.net: fix whitespace, linelen, etc ]

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-27 12:40:24 -07:00
Oleg Seiljus ad5192a2b9 Signalyzer: new config files
Add configs for H2, H4, LITE.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-27 11:56:04 -07:00
David Brownell 4a26390eec PXA255: force reset config
These chips need both SRST and TRST when debugging,
and SRST doesn't gate JTAG.
2009-10-26 22:59:46 -07:00
David Brownell 4a91b070ff omap3530: target reset/init improvements
Now I can issue "reset halt" and have everything act smoothly;
the vector_catch hardware is obviously not kicking in, but the
rest of the reset sequence acts sanely.

 - TAP "setup" event enables the DAP, not omap3_dbginit
   (resolving a chicken/egg bug I noted a while back)
 - Remove stuff from omap3_dbginit which should never be
   used in event handlers
 - Cope better with slow clocking during reset

Also, stop hard-wiring the target name: use the input params in
the standard way, and set up $_TARGETNAME as an output param.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-26 22:53:18 -07:00
Spencer Oliver 8f3b28ff41 Fix incorrect line endings
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2009-10-26 22:39:24 +00:00
Wookey eaebc6cd69 balloon3 board base config
This is the very basic board config for the balloon3 board cpu JTAG
channel.

The rest of the config comprises another 14 .cfg files which I suspect
openocd doesn't really want all of. I'm still not sure how to deal
with this. I'll post another mail/patch to discuss.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-26 11:14:08 -07:00
Øyvind Harboe a07422c26c fix syntax of mww phys. 2009-10-25 22:15:57 +01:00
Øyvind Harboe fcf1301e52 mww_phys retired. Replaced by generic mww phys in target.c 2009-10-21 22:25:33 +02:00
Øyvind Harboe 79e257a209 Added the faux flash driver and target. Used for testing. 2009-10-20 12:23:56 +02:00
David Brownell c70073ef67 davinci: add watchdog reset method
Lightly tested on dm365.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-19 22:50:51 -07:00
Dean Glazeski 76b4ee8935 SDRAM and clock configuration for the SAM9-L9260 board from Olimex 2009-10-18 22:26:38 +02:00
Wookey dd54981702 Fw: [PATCH] OpenRD board configuration
Ofrwarded from Ron, who's not subscribed.

----- Forwarded message from Ron <ron@debian.org> -----

From: Ron <ron@debian.org>
Date: Wed, 14 Oct 2009 04:50:17 +1030
To: wookey@debian.org
Subject: [PATCH] OpenRD board configuration
X-Spam-Status: No, score=-3.6 required=4.5 tests=BAYES_00,RCVD_IN_DNSWL_LOW
	autolearn=ham version=3.2.5

This piggybacks on the 'sheevaplug' layout which uses the same Kirkwood SoC.

Signed-off-by: Ron Lee <ron@debian.org>
2009-10-14 15:51:57 +02:00
Øyvind Harboe 44e9200d0a iMX target config script's ported from Freescale BSP. 2009-10-14 11:04:44 +02:00
David Brownell 7afc181e42 omap2420.cfg updates
Remove ircapture/mask attributes.  Add "srst_nogate".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-14 02:00:34 -07:00
Øyvind Harboe f8cd850c4d arm11 seems to gate JTAG when srst is asserted 2009-10-13 12:10:23 +02:00
Wookey 407061eaa6 Xilinx xcr3256.cfg basic config script 2009-10-12 15:12:35 +02:00
Øyvind Harboe bbd7e22f0b burst writes work fine. clean up junk. 2009-10-12 14:08:29 +02:00
Øyvind Harboe 026559068d Merge commit 'origin/master' 2009-10-12 09:28:56 +02:00
Øyvind Harboe b23b096c8e Supply default reset_config statement to make target scripts useful standalone and provide sensible default 2009-10-12 09:25:08 +02:00
Wookey 456ec36795 Fix reset delays and tinker with ID's 2009-10-10 09:08:06 +02:00
Øyvind Harboe 20a3b14828 Merge commit 'origin/master' 2009-10-09 09:14:27 +02:00
Øyvind Harboe bffe824df6 Added tip in documentation on how to translate quirky syntax 2009-10-09 09:03:53 +02:00
David Brownell 60e24aa597 make PXA255 targets enumerate sort-of-OK
Startup now mostly works, except that the initial target state
is "unknown" ... previously, it refused to even start.

Getting that far required fixing the ircapture value (which
can never have been correct!) and the default JTAG clock rate,
then providing custom reset script.

The "reset" command is still iffy.  DCSR updates, and loading
the debug handler, report numerous DR/IR capture failures.
But once that's done, "poll" reports that the CPU is halted
(which it shouldn't be, this was "reset run"!), due to the
rather curious reason "target-not-halted".

Summary:  you still can't debug these parts, but it's closer.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-08 23:51:50 -07:00
Rabeeh Khoury 7b650a6abe Function to flash SheevaPlug u-boot sectors
This function is used by the SheevaPlug installer to flash the
erase and re-flash the U-Boot environment in the NAND Flash.
2009-10-08 17:10:52 -07:00
David Brownell 41c1af7c67 initial builds of OSK5912 boards need srst_pulls_trst
This is clearly noted in the hardware spec (section 5.2.3); it
works around a chip erratum:  "If the MPU_RESET signal is used,
it may cause the EMIFS bus to lock."

I seem to have a board with such an initial build.  The chip
is labeled XOMAP.  Presumably, parts without that "X" prefix
(eXperimental) resolve this.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-08 13:15:18 -07:00
David Brownell 6efaa95c44 make OMAP5912 resets more reliable
Without some extra delay after releasing SRST, we seemed to
be trying to talk to the TAP before it was ready to respond.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-07 23:29:18 -07:00
John Rigby 37e9f65f5a iMX25 target support
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-07 21:49:36 -07:00
oharboe dc871f422d first stab at imx35 reset init script
git-svn-id: svn://svn.berlios.de/openocd/trunk@2817 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07 12:21:58 +00:00
oharboe 71bca7640a remove recrusive reset invocation from reset init callback
git-svn-id: svn://svn.berlios.de/openocd/trunk@2816 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07 12:20:06 +00:00
dbrownell 0da2f750a1 Add basic support for DM6446 EVM board.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2808 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-06 22:56:52 +00:00
dbrownell 7d78021efa Dragonite target script
From: Nicolas Pitre <nico@fluxnic.net>


git-svn-id: svn://svn.berlios.de/openocd/trunk@2806 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-06 22:55:04 +00:00
oharboe a2886fe3c6 stop using targetnum
git-svn-id: svn://svn.berlios.de/openocd/trunk@2804 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-06 08:10:05 +00:00
dbrownell 7c7467b34f Add a new JTAG "setup" event; use for better DaVinci ICEpick support.
The model is that this fires after scanchain verification, when it's
safe to call "jtag tapenable $TAPNAME".  So it will fire as part of
non-error paths of "init" and "reset" command processing.  However it
will *NOT* trigger during "jtag_reset" processing, which skips all
scan chain verification, or after verification errors.

ALSO:
 - switch DaVinci chips to use this new mechanism
 - log TAP activation/deactivation, since their IDCODEs aren't verified
 - unify "enum jtag_event" scripted event notifications
 - remove duplicative JTAG_TAP_EVENT_POST_RESET


git-svn-id: svn://svn.berlios.de/openocd/trunk@2800 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-05 08:20:28 +00:00
dbrownell c6b24fb4f0 Get rid of needless OMAP and Davinci target config options
so they provide better examples and are easier to maintain.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2797 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-05 08:13:00 +00:00
mlu f87985b614 Updated reset event handling in omap3530 cfg
git-svn-id: svn://svn.berlios.de/openocd/trunk@2796 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-02 16:52:02 +00:00
dbrownell 32599fab1a Remove annoying EOL whitespace (again, sigh).
git-svn-id: svn://svn.berlios.de/openocd/trunk@2781 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-30 23:02:15 +00:00
oharboe 54c16fc56e strip gdb config options
git-svn-id: svn://svn.berlios.de/openocd/trunk@2779 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-30 05:40:40 +00:00
oharboe 642519649e michal smulski <michal.smulski@ooma.com> reset now works
git-svn-id: svn://svn.berlios.de/openocd/trunk@2778 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-30 05:37:32 +00:00
dbrownell fbbd3066ff Don't provide invalid OMAP5912 IR capture value/mask attributes
git-svn-id: svn://svn.berlios.de/openocd/trunk@2762 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-27 07:59:10 +00:00
dbrownell 5c3c4af88f On DM355 EVM board, associate NAND chips with $_TARGETNAME
instead of a target number.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2761 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-26 22:08:50 +00:00
dbrownell ad43374c7f Update DM355 target config to know about ICEpick.
Still defaults to nonstandard EMU0/EMU1 settings.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2757 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-25 17:02:59 +00:00
oharboe 43b3807878 Michael Hasselberg <mh@open-engineering.de> target configuration files for Toshiba TX09 familiy
git-svn-id: svn://svn.berlios.de/openocd/trunk@2756 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-25 16:48:15 +00:00
dbrownell 71af49ca7f Remove annoying end-of-line whitespace from tcl/* files
git-svn-id: svn://svn.berlios.de/openocd/trunk@2743 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-21 18:48:22 +00:00
oharboe 0bcf5a6b76 Ethan Eade <ethan@evolution.com> board config script for Cogent CSB732 i.MX35 (arm1136)
git-svn-id: svn://svn.berlios.de/openocd/trunk@2741 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-21 09:25:52 +00:00
dbrownell 108028112f Ensure that DaVinci chips can't start with a too-fast JTAG clock.
It can be sped up later, once it's known the PLLs are active.

Note that modern tools from TI all use adaptive clocking; and
that if that's done with OpenOCD, "too fast" is also a non-issue.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2740 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-21 00:37:58 +00:00
mlu 01735c515f Reduced sleep time after reset
git-svn-id: svn://svn.berlios.de/openocd/trunk@2732 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-19 14:47:53 +00:00
mlu 7b3be0e21e Move Cortex A8 debug access initialisation from omap3530.cfg to cortex_a8.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@2728 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-18 15:11:46 +00:00
oharboe 9542318312 Rolf Meeser <rolfm_9dq@yahoo.de> adds flash support for NXP's LPC2900 family (ARM968E).
git-svn-id: svn://svn.berlios.de/openocd/trunk@2715 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-16 12:38:26 +00:00
oharboe 772d8d06ea Magnus Lundin <lundin@mlu.mine.nu> Disable poll while core register initialization
git-svn-id: svn://svn.berlios.de/openocd/trunk@2703 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-13 20:07:13 +00:00
oharboe 40f361dd94 David Brownell <david-b@pacbell.net>
Update the board config for the DaVinci DM355 EVM so the reset-init
event handler does the rest of the work it should do:

 - minor PLL setup bugfixes
 - initialize the DDR2 controller
 - probe both NAND banks
 - initialize UART0
 - enable the icache


git-svn-id: svn://svn.berlios.de/openocd/trunk@2699 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-12 08:11:45 +00:00
oharboe 4f7761828c tap post reset event added. Allows omap3530 to send 100 runtest idle tickle's after a TAP_RESET.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2696 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-11 18:34:15 +00:00
ntfreak ec3015db1a - revert change made to sheevaplug.cfg in rev2573
git-svn-id: svn://svn.berlios.de/openocd/trunk@2695 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-11 14:08:28 +00:00
oharboe 6dd8f37e6d syntax error fix
git-svn-id: svn://svn.berlios.de/openocd/trunk@2689 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-11 06:08:51 +00:00
oharboe b4acbee47f michal smulski <michal.smulski@ooma.com> telo target/board scripts
git-svn-id: svn://svn.berlios.de/openocd/trunk@2683 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-10 08:06:22 +00:00
oharboe 0b11e4dbb4 use "armv4_5 core_state arm" instead of soft_reset_halt, fewer side effects
git-svn-id: svn://svn.berlios.de/openocd/trunk@2672 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04 11:03:26 +00:00
oharboe b13dbc80e0 Dirk Behme <dirk.behme@googlemail.com> retire jtag_speed usage
git-svn-id: svn://svn.berlios.de/openocd/trunk@2671 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04 08:27:27 +00:00
oharboe 982ac083f0 Dirk Behme <dirk.behme@googlemail.com> Add default fall back freqency.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2670 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04 08:27:08 +00:00
oharboe 2e29131f2b set ARM mode using explicit command rather than soft_reset_halt which has lots of side effects.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2669 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04 08:23:24 +00:00
oharboe ce89c7bf65 David Brownell <david-b@pacbell.net> "set _TARGETNAME ..." cleanup
git-svn-id: svn://svn.berlios.de/openocd/trunk@2665 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04 05:17:03 +00:00
oharboe 76b78feef1 David Claffey <dnclaffey@gmail.com> get rid of reset recursion
git-svn-id: svn://svn.berlios.de/openocd/trunk@2664 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04 05:14:32 +00:00
oharboe 3878b12793 David Claffey <dnclaffey@gmail.com> tested with the Atheros reference design "PB44"
git-svn-id: svn://svn.berlios.de/openocd/trunk@2662 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-02 17:34:35 +00:00
duane cde17a42e9 Crusty Code fixes from the tcl directory re-arragements
git-svn-id: svn://svn.berlios.de/openocd/trunk@2661 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-02 00:17:39 +00:00
oharboe bb5f713e44 Gary Carlson <gcarlson@carlson-minot.com> config file
git-svn-id: svn://svn.berlios.de/openocd/trunk@2657 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-31 09:06:01 +00:00
oharboe 0dd669f2a7 Ferdinand Postema <ferdinand@postema.eu> config script for the MMnet1001 module from Propox.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2656 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-31 06:02:01 +00:00
oharboe a5d02116a6 David Brownell <david-b@pacbell.net> The Stellaris eval boards don't have TRST signals, so
defining ntrst_delay is pointless; don't.

At least the LM3S3748 eval board doesn't need nsrst_delay
either; remove that too.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2645 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-28 06:53:35 +00:00
oharboe 14f2189e1a Ferdinand Postema <ferdinand@postema.eu> increase reset delay to fix regression from 2600 to 2604
git-svn-id: svn://svn.berlios.de/openocd/trunk@2614 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-25 07:12:57 +00:00
oharboe 41bb41bb93 Brian Findlay <findlaybrian@gmail.com> finalize mini2440.cfg
git-svn-id: svn://svn.berlios.de/openocd/trunk@2611 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-25 07:02:50 +00:00
oharboe 9df861b0c0 use cortex_a8 instead of cortex_m3
git-svn-id: svn://svn.berlios.de/openocd/trunk@2610 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-25 06:59:42 +00:00
oharboe 6336ebb05c Pieter Conradie <Pieter.Conradie@psitek.com> shuffle things around to the right spots. Should have been done in previous commit.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2604 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-21 11:23:24 +00:00
oharboe 5c50cf802c native line endings
git-svn-id: svn://svn.berlios.de/openocd/trunk@2603 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-21 09:01:00 +00:00
oharboe 0a7158140a Pieter Conradie <Pieter.Conradie@psitek.com> Scripts for Atmel AT91SAM7S256 and AT91SAM9260
git-svn-id: svn://svn.berlios.de/openocd/trunk@2602 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-21 08:58:49 +00:00
oharboe 1b092a27f0 Brian Findlay <findlaybrian@gmail.com> Board support for mini2440 (friendlyARM) samsung s3c2440 based board
git-svn-id: svn://svn.berlios.de/openocd/trunk@2593 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-18 17:57:19 +00:00
ntfreak a6f9c5a796 - add cfg file for Amontec JTAGKey2 jtag interface
git-svn-id: svn://svn.berlios.de/openocd/trunk@2592 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-18 16:46:48 +00:00
oharboe 7b4428df97 David Brownell <david-b@pacbell.net> Cleanup the Stellaris target configs:
- remove endianness options; these chips hard-wire "little"
 - $_TARGETNAME updates:
    * don't pass $_TARGETNAME where a TAP label is required
    * flash config uses $_TARGETNAME (it might not be target #0)
    * simplify one $_TARGETNAME construction
 - update work area setup:
    * remove VM spec; these chips have no VM!
    * fix some wrong sizes (0x4000 == 16K, not 4K)
    * simplify: take defaults
 - comment fixups


git-svn-id: svn://svn.berlios.de/openocd/trunk@2589 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-18 10:27:24 +00:00
oharboe 1d96a84f06 Xiaofan Chen <xiaofanc@gmail.com> Split LM3S811 config file into target file and board file
git-svn-id: svn://svn.berlios.de/openocd/trunk@2584 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-16 12:08:35 +00:00
oharboe ad23cb97b2 michal smulski <michal.smulski@ooma.com> arm11 target config files
git-svn-id: svn://svn.berlios.de/openocd/trunk@2583 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-16 11:58:40 +00:00
oharboe 2a0e491d9a Xiaofan Chen <xiaofanc@gmail.com> Add config file for TI-Luminary LM3S1968 chip and EK-LM3S1968 board
git-svn-id: svn://svn.berlios.de/openocd/trunk@2582 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-16 11:54:56 +00:00
ntfreak 59b295dbbe Audrius Urmanavičius [didele.deze@gmail.com]:
Add flash programming support for NXP LPC1700 cortex_m3 based family


git-svn-id: svn://svn.berlios.de/openocd/trunk@2579 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-13 13:54:53 +00:00
ntfreak 1ee32a8fa1 - Bring all the ftdi names inline in the cfg scripts. scripts will now work for either ftd2xx or libftdi drivers.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2573 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-06 21:44:18 +00:00
oharboe 7986ed5ac2 Jonathan Cameron <jic23@cam.ac.uk> fix regression from 1836 when the reset_config command was removed from pxa270.cfg
git-svn-id: svn://svn.berlios.de/openocd/trunk@2557 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-22 19:35:23 +00:00
oharboe a7a1ae032b Stefano Voulaz <s.voulaz@projecktstudio.com> first cut samsung_s3c2450
git-svn-id: svn://svn.berlios.de/openocd/trunk@2556 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-22 14:25:56 +00:00
oharboe 14ed84fdbe Peter Denison <openwrt@marshadder.org> workaround for broken USBprog w/short tms sequences
git-svn-id: svn://svn.berlios.de/openocd/trunk@2509 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-12 14:11:43 +00:00
oharboe e4cff09137 David Brownell <david-b@pacbell.net> split EK board support out
from the target CPU support .

git-svn-id: svn://svn.berlios.de/openocd/trunk@2504 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-10 07:21:12 +00:00
oharboe 3ce038baa3 sharpen reset_config for imx27 - use both trst & srst. srst pulls trst.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2493 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-08 06:32:27 +00:00
oharboe b80f6f96d3 srst pulls trst according to Freescale docs for i.mx27
git-svn-id: svn://svn.berlios.de/openocd/trunk@2492 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-07 16:50:28 +00:00
oharboe 42115c0997 David Brownell <david-b@pacbell.net> Update docs to say that "arm7_9 dbgrq enable" is the default
on ARM9 cores, and update the DaVinci config files so they
no longer explicitly specify it.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2484 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06 21:16:11 +00:00
oharboe 0ab8e710db bitrot: fix numerous syntax errors
added correct jtag device id

git-svn-id: svn://svn.berlios.de/openocd/trunk@2467 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06 08:05:58 +00:00
oharboe c946358a06 Xiaofan Chen <xiaofanc@gmail.com> With this patch, OpenOCD can talk to my
Analog Device Eval-ADuC7060 eval board.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2459 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02 17:47:10 +00:00
zwelch f1f54a0fc5 Remove vim editor commands from TCL files.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2455 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02 11:17:04 +00:00
zwelch 6d08c1800c David Brownell <david-b@pacbell.net>:
Prepare the DaVinci PLL code to support the version 0x0E module
used in newer chips (e.g. dm365):  rename the original code so
it's specific to version 0x02 PLL modules, and update the dm355evm
code to use that new name.

Fix two minor bugs in that version 2 code:  sysclk3 setup used
the sysclk2 divider address (affecting video processing on dm355,
no worry for now) and sysclk2 setup had a syntax error.

Also minor fixups to dm355evm, mostly to permit use of RTCK.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2447 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02 04:55:35 +00:00
ntfreak 917f92f052 - add stm32 connectivity line tapid to stm32.cfg
git-svn-id: svn://svn.berlios.de/openocd/trunk@2440 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-01 10:29:10 +00:00
zwelch ad50a99d6a Add svn:eol-style native property to TCL files that are missing it.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2433 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30 20:44:21 +00:00
zwelch 2eff86ab23 Remove executable bits from at91sam3 configuration files.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2432 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30 20:39:02 +00:00
oharboe d3c77fdbb2 freddie_chopin@op.pl fix handling of workarea
git-svn-id: svn://svn.berlios.de/openocd/trunk@2431 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30 11:50:04 +00:00
zwelch f130f95d45 Marcel Jost <marcel.jost@bfh.ch>:
This patch adds support for the Luminary Micro LM3S9B90 target and
LM3S9B92 Evaluation Kit.  These kits include a new ft2232 adapter, the
Luminary In-Circuit Debug Interface (ICDI) Board, so this is added as a
new ft2232 layout called "luminary_icdi".


git-svn-id: svn://svn.berlios.de/openocd/trunk@2429 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30 09:09:30 +00:00
oharboe f8cc725e0e Kevin Bortis <stm32@bortis.ch> fix worksize
git-svn-id: svn://svn.berlios.de/openocd/trunk@2419 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-29 22:08:34 +00:00
zwelch 3d9551241b David Brownell <david-b@pacbell.net>:
Minor bugfix ... previous version was tested *with* ICEpick active.
The "-disable" can swap with "-enable"; but not with an empty string.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2418 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-29 20:04:21 +00:00
zwelch 95da247b40 David Brownell <david-b@pacbell.net>:
Improve the PXA255 target config:  move all that board-specific
setup to the pxa255_sst board.cfg, to which it evidently belongs
(it's the only PXA255 board now included).

Provide the PXA255 JTAG id from Intel docs, and add a comment
about how this chip is now EOL'd (last orders taken).

Note that I still can't get my old PXA255 board to work.  There's
something broken in the reset sequence, which is preventing the
TAP from coming up at all.  Old mailing list posts suggest this
is a longstanding bug...


git-svn-id: svn://svn.berlios.de/openocd/trunk@2416 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-29 20:04:08 +00:00
duane 0ace4d24db Add support for ATMEL AT91SAM3U - CortexM3 Family
git-svn-id: svn://svn.berlios.de/openocd/trunk@2383 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-24 02:01:14 +00:00
oharboe 974d5f8391 fix eol native
git-svn-id: svn://svn.berlios.de/openocd/trunk@2353 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-22 19:22:10 +00:00
oharboe 1f28b934ce David Brownell <david-b@pacbell.net> Make the Hitex STM32-PerformanceStick board config behave better:
source the STM32 target config instead of using a private clone

git-svn-id: svn://svn.berlios.de/openocd/trunk@2352 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-22 17:32:17 +00:00
oharboe 26807d1935 David Brownell <david-b@pacbell.net> target config file for newish DM365 chip. Think of this as
an improved DM355, integrating much better HD video support,
Ethernet, and other goodies.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2351 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-22 17:31:12 +00:00
oharboe bc9df17e42 Paulius Zaleckas <paulius.zaleckas@gmail.com> Add config for CS351x CPUs
git-svn-id: svn://svn.berlios.de/openocd/trunk@2349 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-21 21:06:23 +00:00
oharboe 1a400f8b8e Freddie Chopin <freddie_chopin@op.pl> makes lpc2478.cfg file more "standard" and - what is most important - correct (it's working [; ). I've also added some comments which try to clarify the meaning of all that's in there.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2269 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-17 20:49:55 +00:00
zwelch d727e31af9 David Brownell <david-b@pacbell.net>:
Update the Beagle setup:

 - OMAP3530 updates:
    * split ICEpick TAP enable support to its own file, for
      reuse and eventually for storing other utility code
      like emulation reset
    * clean up, including labeling the tap as for DAP not
      for the Cortex-A8 and making endianness non-variable
    * add a few FIXMEs

 - BeagleBoard cleanup:  there's no SRST, "endstate" is gone, etc

I'm not sure I'd say it's further than "barely limping" just yet.
Key issues remain lack of Cortex-A8 support, and more complete
support for resetting.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2267 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-17 06:44:29 +00:00
zwelch 7ddc6c3d55 David Brownell <david-b@pacbell.net>:
Fix for a goofy "board" config ... reuse target/pxa270.cfg
instead of using a private copy.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2266 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-17 06:41:05 +00:00
zwelch 10e435c961 David Brownell <david-b@pacbell.net>:
DM6446 config updates:

 - List two more TAPs, as disabled, mostly for doc purposes
 - Included basic ICEpick support, still disabled by default
 - Shorten line lengths
 - Use $_TARGETNAME to configure the ETM and ETB
 - This ARM core don't support endianness overriding

For now, boards that can't jumper EMU0/EMU1 will need to tweak
a variable's setting.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2265 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-17 06:40:58 +00:00
zwelch 1ac220df71 David Brownell <david-b@pacbell.net>:
Add another board ... OMAP2420 "H4" board.  This won't be very widely
used with OpenOCD, but with mainline support in both U-Boot and Linux
it at least makes for a more complete set (and another testcase).

This is incomplete support in several respects.  The ARM11 support is
not very deep yet; most registers aren't available, and the ETM can't
be hooked up.  Plus, there's no script for OMAP-specific stuff like
setting up the SDRAM controller.  Eventually the same NAND controller
driver should work with OMAP2 and OMAP3.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2242 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-15 23:54:09 +00:00
zwelch 8b7f813b23 David Brownell <david-b@pacbell.net>:
Tweak the csb337 code so that it doesn't enable alignment traps when
it completes the "reset init" sequence.  It turns out that the current
CFI code reliably triggers such traps.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2179 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-10 04:08:32 +00:00
zwelch ec274b2707 Revert changes from r2134 that snuck into the commit. Mea culpa.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-09 01:01:13 +00:00
zwelch 594abeb82b David Brownell <david-b@pacbell.net>:
Add configuration for an old AT91rm9200 board, the Cogent CSB 337.
Worth noting from the OpenOCD perspective:

 - It got a real hardware trace port connector; wired up here as
   much as we can, lacking inexpensive trace-aware dongles.

 - This is the first in-tree use of the "arm920t cp15" command.
   It adjusts the CPU clocking and enables i-cache, which gives
   more than 4x speedup after booting Linux; it's visible even
   just running U-Boot.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2134 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-09 00:58:23 +00:00
oharboe f92b104d8d David Brownell <david-b@pacbell.net> target/at91rm9200.cfg cleanup
git-svn-id: svn://svn.berlios.de/openocd/trunk@2075 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-05 08:35:24 +00:00
zwelch 7da3c2cda2 David Brownell <david-b@pacbell.net>:
This is the missing half of the r1974 patch:
OSK5912 board support, which was split out from
the omap5912 target config.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1985 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-01 23:06:17 +00:00
zwelch 878d0cb043 David Brownell <david-b@pacbell.net>:
Split out OSK5912 board support from the omap5912 target config, and make
it pass sanity checks on my (Rev C/original) hardware:

 - Fix syntax error ("-irlen" not "irlen")
 - Provide real TAP ids for the ARM926ejs and the C55x dsp
 - Label both CPUs appropriately (DSP, ARM)
 - List both flash chips

The scan chain looks like this (note truncated DSP instruction code):

      TapName            | Enabled |   IdCode      Expected    IrLen IrCap  IrMask Instr
 ---|--------------------|---------|------------|------------|------|------|------|---------
  0 | omap5912.dsp       |    Y    | 0x03df1d81 | 0x03df1d81 | 0x26 | 0x00 | 0x00 | 0xffffffff
  1 | omap5912.arm       |    Y    | 0x0692602f | 0x0692602f | 0x04 | 0x01 | 0x00 | 0x0c
  2 | omap5912.unknown   |    Y    | 0x00000000 | 0x00000000 | 0x08 | 0x00 | 0x00 | 0xff

I still don't know what that third TAP is; maybe an early version of
an ICEpick JTAG router.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1974 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-01 03:05:59 +00:00
ntfreak ff2737b429 - add support for cortino jtag interface
git-svn-id: svn://svn.berlios.de/openocd/trunk@1925 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-27 11:58:19 +00:00
zwelch dbbc9c41f7 Move TCL script files -- Step 2 of 2:
- Move src/tcl to tcl/.
- Update top Makefile.am to use new path name.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-27 06:49:24 +00:00