tcl/target: consolidate Kinetis configs
Change-Id: I75fe6b239ff435f700459e7d7040616503fa458e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2460 Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
This commit is contained in:
Paul Fertser
Spencer Oliver
parent
d940a3224b
commit
38107ff966
|
|
@ -2,39 +2,5 @@
|
|||
# Freescale Kinetis K40 devices
|
||||
#
|
||||
|
||||
#
|
||||
# K40 devices support both JTAG and SWD transports.
|
||||
#
|
||||
source [find target/swj-dp.tcl]
|
||||
|
||||
if { [info exists CHIPNAME] } {
|
||||
set _CHIPNAME $CHIPNAME
|
||||
} else {
|
||||
set _CHIPNAME k40
|
||||
}
|
||||
|
||||
if { [info exists ENDIAN] } {
|
||||
set _ENDIAN $ENDIAN
|
||||
} else {
|
||||
set _ENDIAN little
|
||||
}
|
||||
|
||||
if { [info exists CPUTAPID] } {
|
||||
set _CPUTAPID $CPUTAPID
|
||||
} else {
|
||||
set _CPUTAPID 0x4ba00477
|
||||
}
|
||||
|
||||
set _TARGETNAME $_CHIPNAME.cpu
|
||||
|
||||
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
|
||||
|
||||
target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu
|
||||
|
||||
reset_config srst_nogate
|
||||
|
||||
if {![using_hla]} {
|
||||
# if srst is not fitted use SYSRESETREQ to
|
||||
# perform a soft reset
|
||||
cortex_m reset_config sysresetreq
|
||||
}
|
||||
set CHIPNAME k40
|
||||
source [find target/kx.cfg]
|
||||
|
|
|
|||
|
|
@ -2,39 +2,5 @@
|
|||
# Freescale Kinetis K60 devices
|
||||
#
|
||||
|
||||
#
|
||||
# K60 devices support both JTAG and SWD transports.
|
||||
#
|
||||
source [find target/swj-dp.tcl]
|
||||
|
||||
if { [info exists CHIPNAME] } {
|
||||
set _CHIPNAME $CHIPNAME
|
||||
} else {
|
||||
set _CHIPNAME k60
|
||||
}
|
||||
|
||||
if { [info exists ENDIAN] } {
|
||||
set _ENDIAN $ENDIAN
|
||||
} else {
|
||||
set _ENDIAN little
|
||||
}
|
||||
|
||||
if { [info exists CPUTAPID] } {
|
||||
set _CPUTAPID $CPUTAPID
|
||||
} else {
|
||||
set _CPUTAPID 0x4ba00477
|
||||
}
|
||||
|
||||
set _TARGETNAME $_CHIPNAME.cpu
|
||||
|
||||
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
|
||||
|
||||
target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu
|
||||
|
||||
reset_config srst_nogate
|
||||
|
||||
if {![using_hla]} {
|
||||
# if srst is not fitted use SYSRESETREQ to
|
||||
# perform a soft reset
|
||||
cortex_m reset_config sysresetreq
|
||||
}
|
||||
set CHIPNAME k60
|
||||
source [find target/kx.cfg]
|
||||
|
|
|
|||
|
|
@ -2,70 +2,5 @@
|
|||
# Freescale Kinetis KL25 devices
|
||||
#
|
||||
|
||||
#
|
||||
# KL25 devices support both JTAG and SWD transports.
|
||||
#
|
||||
source [find target/swj-dp.tcl]
|
||||
|
||||
if { [info exists CHIPNAME] } {
|
||||
set _CHIPNAME $CHIPNAME
|
||||
} else {
|
||||
set _CHIPNAME kl25
|
||||
}
|
||||
|
||||
if { [info exists ENDIAN] } {
|
||||
set _ENDIAN $ENDIAN
|
||||
} else {
|
||||
set _ENDIAN little
|
||||
}
|
||||
|
||||
# Work-area is a space in RAM used for flash programming
|
||||
# By default use 4kB
|
||||
if { [info exists WORKAREASIZE] } {
|
||||
set _WORKAREASIZE $WORKAREASIZE
|
||||
} else {
|
||||
set _WORKAREASIZE 0x1000
|
||||
}
|
||||
|
||||
if { [info exists CPUTAPID] } {
|
||||
set _CPUTAPID $CPUTAPID
|
||||
} else {
|
||||
set _CPUTAPID 0x0bc11477
|
||||
}
|
||||
|
||||
swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
|
||||
|
||||
set _TARGETNAME $_CHIPNAME.cpu
|
||||
target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_CHIPNAME.cpu
|
||||
|
||||
# It is important that "kinetis mdm check_security" is called for
|
||||
# 'examine-end' event and not 'eximine-start'. Calling it in 'examine-start'
|
||||
# causes "kinetis mdm check_security" to fail the first time openocd
|
||||
# calls it when it tries to connect after the CPU has been power-cycled.
|
||||
$_CHIPNAME.cpu configure -event examine-end {
|
||||
kinetis mdm check_security
|
||||
}
|
||||
|
||||
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
|
||||
|
||||
set _FLASHNAME $_CHIPNAME.flash
|
||||
flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME
|
||||
|
||||
# Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual
|
||||
# specifies up to 1MHz for VLPR mode.
|
||||
adapter_khz 1000
|
||||
|
||||
reset_config srst_nogate
|
||||
|
||||
if {![using_hla]} {
|
||||
# if srst is not fitted use SYSRESETREQ to
|
||||
# perform a soft reset
|
||||
cortex_m reset_config sysresetreq
|
||||
}
|
||||
|
||||
$_TARGETNAME configure -event reset-init {
|
||||
# Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual
|
||||
# specifies up to 24MHz for run mode; Table 17 of Sub-Family Data
|
||||
# Sheet rev4 lists 25MHz as the maximum frequency.
|
||||
adapter_khz 24000
|
||||
}
|
||||
set CHIPNAME kl25
|
||||
source [find target/klx.cfg]
|
||||
|
|
|
|||
|
|
@ -2,49 +2,5 @@
|
|||
# Freescale Kinetis KL46 devices
|
||||
#
|
||||
|
||||
#
|
||||
# KL46 devices supports SWD transport only.
|
||||
#
|
||||
source [find target/swj-dp.tcl]
|
||||
|
||||
if { [info exists CHIPNAME] } {
|
||||
set _CHIPNAME $CHIPNAME
|
||||
} else {
|
||||
set _CHIPNAME kl46
|
||||
}
|
||||
|
||||
if { [info exists ENDIAN] } {
|
||||
set _ENDIAN $ENDIAN
|
||||
} else {
|
||||
set _ENDIAN little
|
||||
}
|
||||
|
||||
# Work-area is a space in RAM used for flash programming
|
||||
# By default use 4kB
|
||||
if { [info exists WORKAREASIZE] } {
|
||||
set _WORKAREASIZE $WORKAREASIZE
|
||||
} else {
|
||||
set _WORKAREASIZE 0x1000
|
||||
}
|
||||
|
||||
if { [info exists CPUTAPID] } {
|
||||
set _CPUTAPID $CPUTAPID
|
||||
} else {
|
||||
set _CPUTAPID 0x0bc11477
|
||||
}
|
||||
|
||||
swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
|
||||
|
||||
set _TARGETNAME $_CHIPNAME.cpu
|
||||
target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_CHIPNAME.cpu
|
||||
|
||||
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
|
||||
|
||||
set _FLASHNAME $_CHIPNAME.flash
|
||||
flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME
|
||||
|
||||
if {![using_hla]} {
|
||||
# if srst is not fitted use SYSRESETREQ to
|
||||
# perform a soft reset
|
||||
cortex_m reset_config sysresetreq
|
||||
}
|
||||
set CHIPNAME kl46
|
||||
source [find target/klx.cfg]
|
||||
|
|
|
|||
|
|
@ -0,0 +1,62 @@
|
|||
#
|
||||
# Freescale Kinetis KL series devices
|
||||
#
|
||||
|
||||
source [find target/swj-dp.tcl]
|
||||
|
||||
if { [info exists CHIPNAME] } {
|
||||
set _CHIPNAME $CHIPNAME
|
||||
} else {
|
||||
set _CHIPNAME klx
|
||||
}
|
||||
|
||||
# Work-area is a space in RAM used for flash programming
|
||||
# By default use 4kB
|
||||
if { [info exists WORKAREASIZE] } {
|
||||
set _WORKAREASIZE $WORKAREASIZE
|
||||
} else {
|
||||
set _WORKAREASIZE 0x1000
|
||||
}
|
||||
|
||||
if { [info exists CPUTAPID] } {
|
||||
set _CPUTAPID $CPUTAPID
|
||||
} else {
|
||||
set _CPUTAPID 0x0bc11477
|
||||
}
|
||||
|
||||
swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
|
||||
|
||||
set _TARGETNAME $_CHIPNAME.cpu
|
||||
target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu
|
||||
|
||||
# It is important that "kinetis mdm check_security" is called for
|
||||
# 'examine-end' event and not 'eximine-start'. Calling it in 'examine-start'
|
||||
# causes "kinetis mdm check_security" to fail the first time openocd
|
||||
# calls it when it tries to connect after the CPU has been power-cycled.
|
||||
$_CHIPNAME.cpu configure -event examine-end {
|
||||
kinetis mdm check_security
|
||||
}
|
||||
|
||||
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
|
||||
|
||||
set _FLASHNAME $_CHIPNAME.flash
|
||||
flash bank $_FLASHNAME kinetis 0 0 0 0 $_TARGETNAME
|
||||
|
||||
# Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual
|
||||
# specifies up to 1MHz for VLPR mode.
|
||||
adapter_khz 1000
|
||||
|
||||
reset_config srst_nogate
|
||||
|
||||
if {![using_hla]} {
|
||||
# if srst is not fitted use SYSRESETREQ to
|
||||
# perform a soft reset
|
||||
cortex_m reset_config sysresetreq
|
||||
}
|
||||
|
||||
$_TARGETNAME configure -event reset-init {
|
||||
# Table 5-1. Clock Summary of KL25 Sub-Family Reference Manual
|
||||
# specifies up to 24MHz for run mode; Table 17 of Sub-Family Data
|
||||
# Sheet rev4 lists 25MHz as the maximum frequency.
|
||||
adapter_khz 24000
|
||||
}
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
#
|
||||
# Freescale Kinetis Kx series devices
|
||||
#
|
||||
|
||||
source [find target/swj-dp.tcl]
|
||||
|
||||
if { [info exists CHIPNAME] } {
|
||||
set _CHIPNAME $CHIPNAME
|
||||
} else {
|
||||
set _CHIPNAME kx
|
||||
}
|
||||
|
||||
if { [info exists ENDIAN] } {
|
||||
set _ENDIAN $ENDIAN
|
||||
} else {
|
||||
set _ENDIAN little
|
||||
}
|
||||
|
||||
if { [info exists CPUTAPID] } {
|
||||
set _CPUTAPID $CPUTAPID
|
||||
} else {
|
||||
if { [using_jtag] } {
|
||||
set _CPUTAPID 0x4ba00477
|
||||
} {
|
||||
set _CPUTAPID 0x2ba01477
|
||||
}
|
||||
}
|
||||
|
||||
set _TARGETNAME $_CHIPNAME.cpu
|
||||
|
||||
swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
|
||||
|
||||
target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.cpu
|
||||
|
||||
reset_config srst_nogate
|
||||
|
||||
if {![using_hla]} {
|
||||
# if srst is not fitted use SYSRESETREQ to
|
||||
# perform a soft reset
|
||||
cortex_m reset_config sysresetreq
|
||||
}
|
||||
Loading…
Reference in New Issue