interesting
/
riscv-openocd
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

at91sam7sx.cfg: fix use $_TARGETNAME as target identifier, not '0' warning 

all other at91 cfg files already has this fix.
It also fix "No flash at address 0x...." error when JTAG chain consist of
more than one at91sam7sx cores during attempt to flash other than first mcu
in chain.

Change-Id: I7785d9103d0fc494b6a823e2c73f850373ffe112
Signed-off-by: Sergey A. Borshch <sb-sf@users.sourceforge.net>
Reviewed-on: http://openocd.zylin.com/1812
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
This commit is contained in:
Sergey A. Borshch 2013-11-22 12:16:41 +02:00 committed by Andreas Fritiofson
parent cd710ebac2
commit 03e9729043
1 changed files with 1 additions and 1 deletions
tcl/target
at91sam7sx.cfg

2
tcl/target/at91sam7sx.cfg
View File

@ -50,4 +50,4 @@ $_TARGETNAME configure -work-area-phys 0x00200000 -work-area-size 0x4000 -work-a
#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432
flash bank $_FLASHNAME at91sam7 0 0 0 0 $_TARGETNAME 0 0 0 0 0 0 0 18432