interesting
/
riscv-openocd
mirror of https://github.com/riscv/riscv-openocd.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

lm3s811-ek uses generic stellaris target config 

There's no point in an lm3s811-specific target file,
so remove it in favor of the generic "stellaris.cfg".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This commit is contained in:
David Brownell 2010-07-17 02:59:23 -04:00 committed by David Brownell
parent a4dace3122
commit 2fdc1db304
3 changed files with 6 additions and 33 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
NEWS
View File

@ -49,6 +49,7 @@ Board, Target, and Interface Configuration Scripts:
Support Voipac PXA270/PXA270M module.
New $PARPORTADDR tcl variable used to change default
parallel port address used.
Remove lm3s811.cfg; use "stellaris.cfg" instead
Core Jim/TCL Scripting:
New "add_script_search_dir" command, behaviour is the same

9
tcl/board/ek-lm3s811.cfg
View File

@ -4,13 +4,14 @@
# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html
# include the FT2232 interface config for on-board JTAG interface
# NOTE: older '811-EK boards (before rev C) shouldn't use this.
source [find interface/luminary.cfg]
# include the target config
source [find target/lm3s811.cfg]
set CHIPNAME lm3s811
# include the target config
source [find target/stellaris.cfg]
# jtag speed
adapter_khz 500
adapter_nsrst_delay 100

29
tcl/target/lm3s811.cfg
View File

@ -1,29 +0,0 @@
# Script for TI/Luminary Stellaris LM3S811
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME lm3s811
}
if { [info exists CPUTAPID ] } {
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0x3ba00477
}
#jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUTAPID
# the luminary variant causes a software reset rather than asserting SRST
# this stops the debug registers from being cleared
# this will be fixed in later revisions of silicon
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu -variant lm3s
# 8k working area at base of ram, not backed up
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x2000
#flash configuration
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME