It adds `DriveBit`, `DriveChunk` and `DriveSpec` types which are similar
to `SigBit`, `SigChunk` and `SigSpec` but can also directly represent
cell ports, undriven bits and multiple drivers. For indexing an RTLIL
module and for querying signal drivers it comes with a `DriverMap` type
which is somewhat similar to a `SigMap` but is guaranteed to produce
signal drivers as returned representatives.
A `DriverMap` can also optionally preserve connections via intermediate
wires (e.g. querying the driver of a cell input port will return a
connected intermediate wire, querying the driver of that wire will
return the cell output port that's driving the wire).
This is already supported by `SigSpec` and since both `SigChunk` and
`SigSpec` implement `extract` which is the multi-bit variant of this,
there is no good reason for `SigChunk` to not support
`SigBit operator[](int offset)`.
When implementing custom log_... functions or custom overloads for the
core log functions like log_signal it is necessary to return `char *`
that are valid long enough.
The log_... functions implemented in log.cc use either `log_id_cache` or
`string_buf` which both are cleared on log_pop.
This commit adds a public `log_str` function which stores its argument
in the `log_id_cache` and returns the stored copy, such that custom
log functions outside of log.cc can also create strings that remain
valid until the next `log_pop`.
This adds a generic non-recursive implementation of Tarjan's linear time
SCC algorithm that produces components in topological order. It can be
instantiated to work directly on any graph representation for which the
enumerate_nodes and enumerate_successors interface can be implemented.
Only the `B` input (the shift amount) can be marked as signed on a
`$shiftx` cell. Adapt the helper accordingly and prevent it from
creating invalid RTLIL when called with `is_signed` set. Previously
it would mark both `A` and `B` as signed.
Previously `extract` on a `SigSpec` would always unpack it. Since a
significant amount of `SigSpec`s have one or few chunks, it's worth
having a dedicated implementation.
This is especially true, since the RTLIL frontend calls into this for
every `wire [lhs:rhs]` slice, making this `extract` take up 40% when
profiling `read_rtlil` with one of the largest coarse grained RTLIL
designs I had on hand.
With this change the `read_rtlil` profile looks like I would expect it
to look like, but I noticed that a lot of the other core RTLIL methods
also are a bit too eager with unpacking or implementing
`SigChunk`/`Const` overloads that just convert to a single chunk
`SigSpec` and forward to the implementation for that, when a direct
implementation would avoid temporary std::vector allocations. While not
relevant for `read_rtlil`, to me it looks like there might be a few easy
overall performance gains to be had by addressing this more generally.
This adjusts the way the headers kernel/{yosys,rtlil,register,log}.h
include each other to avoid the need of including headers outside of
include guards as well as avoiding the inclusion of rtlil.h in the
middle of yosys.h with rtlil.h depending on the prefix of yosys.h, and
the suffix of yosys.h depending on rtlil.h.
To do this I moved some of the declaration in yosys.h into a new header
yosys_common.h. I'm not sure if that is strictly necessary.
Including any of these files still results in the declarations of all
these headers being included, so this shouldn't be a breaking change for
any passes or external plugins.
My main motivation for this is that ccls's (clang based language server)
include guard handling gets confused by the previous way the includes
were done. It often ends up treating the include guard as a generic
disabled preprocessor conditional, breaking navigation and highlighting
for the core RTLIL data structures.
Additionally I think avoiding cyclic includes in the middle of header
files that depend on includes being outside of include guards will also
be less confusing for developers reading the code, not only for tools
like ccls.
Before this commit, the combination of `_` and `0` format characters
would produce a result like `000000001010_1010`.
After this commit, it would be `0000_0000_1010_1010`.
This has a slight quirk where a format like `{:020_b}` results in
the output `0_0000_0000_1010_1010`, which is one character longer than
requested. Python has the same behavior, and it's not clear what would
be strictly speaking correct, so Python behavior is implemented.
The option is serialized to RTLIL as `_` (to match Python's option with
the same symbol), and sets the `group` flag. This flag inserts an `_`
symbol between each group of 3 digits (for decimal) or four digits (for
binary, hex, and octal).
The option is serialized to RTLIL as `#` (to match Python's and Rust's
option with the same symbol), and sets the `show_base` flag. Because
the flag is called `show_base` and not e.g. `alternate_format` (which
is what Python and Rust call it), in addition to the prefixes `0x`,
`0X`, `0o`, `0b`, the RTLIL option also prints the `0d` prefix.
This format type is used to print an Unicode character (code point) as
its UTF-8 serialization. To this end, two UTF-8 decoders (one for fmt,
one for cxxrtl) are added for rendering. When converted to a Verilog
format specifier, `UNICHAR` degrades to `%c` with the low 7 bits of
the code point, which has equivalent behavior for inputs not exceeding
ASCII. (SystemVerilog leaves source and display encodings completely
undefined.)
Before this commit, the existing alignments were `LEFT` and `RIGHT`,
which added the `padding` character to the right and left just before
finishing formatting. However, if `padding == '0'` and the alignment is
to the right, then the padding character (digit zero) was added after
the sign, if one is present.
After this commit, the special case for `padding == '0'` is removed,
and the new justification `NUMERIC` adds the padding character like
the justification `RIGHT`, except after the sign, if one is present.
(Space, for the `SPACE_MINUS` sign mode, counts as the sign.)
The first two were already supported with the `plus` boolean flag.
The third one is a new specifier, which is allocated the ` ` character.
In addition, `MINUS` is now allocated the `-` character, but old format
where there is no `+`, `-`, or `-` in the respective position is also
accepted for compatibility.
Before this commit, the `STRING` variant inserted a literal string;
the `CHARACTER` variant inserted a string. This commit renames them
to `LITERAL` and `STRING` respectively.
The behavior of these format specifiers is highly specific to Verilog
(`$time` and `$realtime` are only defined relative to `$timescale`)
and may not fit other languages well, if at all. If they choose to use
it, it is now clear what they are opting into.
This commit also simplifies the CXXRTL code generation for these format
specifiers.
This commit achieves three roughly equally important goals:
1. To bring the rendering code in kernel/fmt.cc and in cxxrtl.h as close
together as possible, with an ideal of only having the bigint library
as the difference between the render functions.
2. To make the treatment of `$time` and `$realtime` in CXXRTL closer to
the Verilog semantics, at least in the formatting code.
3. To change the code generator so that all of the `$print`-to-`string`
conversion code is contained inside of a closure.
There are two reasons to aim for goal (3):
a. Because output redirection through definition of a global ostream
object is neither convenient nor useful for environments where
the output is consumed by other code rather than being printed on
a terminal.
b. Because it may be desirable to, in some cases, ignore the `$print`
cells that are present in the netlist based on a runtime decision.
This is doubly true for an upcoming `$check` cell implementing
assertions, since failing a `$check` would by default cause a crash.
When we are iterating over a `SigSpec`, the visited values will be of
type `SigBit` (as is the return type of `operator*()`). Account for that
in the publicly declared types.
`std::iterator` has been deprecated in C++17. Yosys is being compiled
against the C++11 standard but plugins can opt to compile against a
newer one. To silence some deprecation warnings when those plugins are
being compiled, replace the `std::iterator` inheritance with the
equivalent type declarations.
* Keep the previous behavior when no tcl script is used
* Do not treat "-" as a flag but as a positional argument
* Keep including <unistd.h> as it's also used for other functions (at
least for the emscripten build)
* Move the custom getopt implementation into the Yosys namespace to
avoid potential collisions
The main speedup is accomplished by avoiding a heap allocation in the common case where the final string length is less than 128. Inlining stringf & vstringf adds an additional improvement.
The main speedup comes from swithing from using a SHA1 hash to std::hash<std::string>. There is no need to use an expensive cryptographic hash for fingerprinting in this context.
Emily Schmidt
Roland Coeurjoly
Jannis Harder
Emil J. Tywoniak
Krystine Sherwin
Emil J
Alexander von Gluck
George Rennie
Martin Povišer
Miodrag Milanovic
Catherine
N. Engelhardt
Jason Thorpe
Claire Xen
hakan-demirli
hakan-demirli
anonkey
Lofty
Rasmus Munk Larsen