riscv
/
yosys
mirror of https://github.com/YosysHQ/yosys.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
11,029 Commits 92 Branches 49 Tags 39 MiB
Commit Graph

161 Commits

Author SHA1 Message Date
Clifford Wolf 241901461a Add "write_verilog -siminit" 
Signed-off-by: Clifford Wolf <clifford@clifford.at>
 2019-02-28 15:03:03 -08:00
Eddie Hung 11480b4fa3 Instead of INIT param on cells, use initial statement with hier ref as 
per @cliffordwolf
 2019-02-17 12:18:12 -08:00
Eddie Hung 17cd5f759f Merge https://github.com/YosysHQ/yosys into dff_init 2019-02-17 11:49:06 -08:00
Eddie Hung 20ca795b87 Remove check for cell->name[0] == '$' 2019-02-06 14:53:40 -08:00
Eddie Hung c373640a3a Refactor 2019-02-06 14:28:44 -08:00
Eddie Hung 8241db6960 write_verilog to cope with init attr on q when -noexpr 2019-02-06 14:17:09 -08:00
whitequark da65e1e8d9 write_verilog: correctly emit asynchronous transparent ports. 
This commit fixes two related issues:
  * For asynchronous ports, clock is no longer added to domain list.
    (This would lead to absurd constructs like `always @(posedge 0)`.
  * The logic to distinguish synchronous and asynchronous ports is
    changed to correctly use or avoid clock in all cases.

Before this commit, the following RTLIL snippet (after memory_collect)

    cell $memrd $2
      parameter \MEMID "\\mem"
      parameter \ABITS 2
      parameter \WIDTH 4
      parameter \CLK_ENABLE 0
      parameter \CLK_POLARITY 1
      parameter \TRANSPARENT 1
      connect \CLK 1'0
      connect \EN 1'1
      connect \ADDR \mem_r_addr
      connect \DATA \mem_r_data
    end

would lead to invalid Verilog:

    reg [1:0] _0_;
    always @(posedge 1'h0) begin
      _0_ <= mem_r_addr;
    end
    assign mem_r_data = mem[_0_];

Note that there are two potential pitfalls remaining after this
change:
  * For asynchronous ports, the \EN input and \TRANSPARENT parameter
    are silently ignored. (Per discussion in #760 this is the correct
    behavior.)
  * For synchronous transparent ports, the \EN input is ignored. This
    matches the behavior of the $mem simulation cell. Again, see #760.
 2019-01-29 02:24:00 +00:00
Clifford Wolf 81581f24fc
Merge pull request #800 from whitequark/write_verilog_tribuf 
write_verilog: write $tribuf cell as ternary
 2019-01-27 09:23:41 +01:00
whitequark 3d7925ad9f write_verilog: write $tribuf cell as ternary. 2019-01-27 00:24:06 +00:00
whitequark 42c47a83da write_verilog: escape names that match SystemVerilog keywords. 2019-01-27 00:03:53 +00:00
Clifford Wolf 6c5049f016 Fix handling of $shiftx in Verilog back-end 
Signed-off-by: Clifford Wolf <clifford@clifford.at>
 2019-01-15 10:55:27 +01:00
whitequark efa278e232 Fix typographical and grammatical errors and inconsistencies. 
The initial list of hits was generated with the codespell command
below, and each hit was evaluated and fixed manually while taking
context into consideration.

    DIRS="kernel/ frontends/ backends/ passes/ techlibs/"
    DIRS="${DIRS} libs/ezsat/ libs/subcircuit"
    codespell $DIRS -S *.o -L upto,iff,thru,synopsys,uint

More hits were found by looking through comments and strings manually.
 2019-01-02 13:12:17 +00:00
whitequark ca866d384e write_verilog: handle the $shift cell. 
The implementation corresponds to the following Verilog, which is
lifted straight from simlib.v:

    module \\$shift (A, B, Y);

    parameter A_SIGNED = 0;
    parameter B_SIGNED = 0;
    parameter A_WIDTH = 0;
    parameter B_WIDTH = 0;
    parameter Y_WIDTH = 0;

    input [A_WIDTH-1:0] A;
    input [B_WIDTH-1:0] B;
    output [Y_WIDTH-1:0] Y;

    generate
        if (B_SIGNED) begin:BLOCK1
            assign Y = $signed(B) < 0 ? A << -B : A >> B;
        end else begin:BLOCK2
            assign Y = A >> B;
        end
    endgenerate

    endmodule
 2018-12-16 18:46:32 +00:00
Clifford Wolf ddff75b60a
Merge pull request #736 from whitequark/select_assert_list 
select: print selection if a -assert-* flag causes an error
 2018-12-16 16:45:49 +01:00
whitequark fccaa25ec1 write_verilog: add a missing newline. 2018-12-16 15:22:34 +00:00
whitequark 7fe770a441 write_verilog: correctly map RTLIL `sync init`. 2018-12-07 18:55:08 +00:00
rafaeltp c7770d9eea adding offset info to memories 2018-10-18 16:22:33 -07:00
rafaeltp 609f46eeb7 adding offset info to memories 2018-10-18 16:20:21 -07:00
acw1251 efac8a45a6 Fixed typo in "verilog_write" help message 2018-09-18 13:34:30 -04:00
Clifford Wolf 12440fcc8f Add $lut support to Verilog back-end 
Signed-off-by: Clifford Wolf <clifford@clifford.at>
 2018-09-06 00:18:01 +02:00
Henner Zeller 3aa4484a3c Consistent use of 'override' for virtual methods in derived classes. 
o Not all derived methods were marked 'override', but it is a great
  feature of C++11 that we should make use of.
o While at it: touched header files got a -*- c++ -*- for emacs to
  provide support for that language.
o use YS_OVERRIDE for all override keywords (though we should probably
  use the plain keyword going forward now that C++11 is established)
 2018-07-20 23:51:06 -07:00
Clifford Wolf d9a2b43014 Add $dlatch support to write_verilog 
Signed-off-by: Clifford Wolf <clifford@clifford.at>
 2018-04-22 16:03:26 +02:00
Clifford Wolf adf1754729 Add $shiftx support to verilog front-end 2017-10-07 13:40:54 +02:00
Clifford Wolf 65f91e5120 Rename "write_verilog -nobasenradix" to "write_verilog -decimal" 2017-10-03 17:31:21 +02:00
dh73 e480847753 Fixed wrong declaration in Verilog backend 2017-10-01 11:11:32 -05:00
dh73 cbaba62401 Adding Cyclone IV (E, GX), Arria 10, Cyclone V and LPM functions (ALTPLL and M9K); M9K is not finished yet. Achronix Speedster also in this commit. Both Arria10 and Speedster-i are still experimental due complexity, but you can experiment around those devices right now 2017-10-01 11:04:17 -05:00
Clifford Wolf 05cdd58c8d Add $_ANDNOT_ and $_ORNOT_ gates 2017-05-17 09:08:29 +02:00
Clifford Wolf ce132cf652 Cleanups and fixed in write_verilog regarding reg init 2016-11-16 12:00:39 +01:00
Clifford Wolf 3db2ac4e00 Added hex constant support to write_verilog 2016-11-03 12:13:23 +01:00
Clifford Wolf caa2fc62ef Adde "write_verilog -renameprefix -v" 2016-11-01 11:30:27 +01:00
Clifford Wolf 75bf7416f0 Bugfix in partial mem write handling in verilog back-end 2016-08-20 13:06:06 +02:00
Clifford Wolf 9b8e06bee1 Added missing support for mem read enable ports to verilog back-end 2016-08-18 21:47:02 +02:00
Clifford Wolf f0a8713fea Fixed upto handling in verilog back-end 2016-08-15 08:26:20 +02:00
Clifford Wolf 5fe13a16ea Added "write_verilog -defparam" 2016-07-30 12:46:06 +02:00
Clifford Wolf 7fa61cba1b Added "write_verilog -nodec -nostr" 2016-07-30 12:38:40 +02:00
Clifford Wolf 0bc95f1e04 Added "yosys -D" feature 2016-04-21 23:28:37 +02:00
Clifford Wolf 2a8d5e64f5 Bugfix in write_verilog for RTLIL processes 2016-03-14 13:03:28 +01:00
Clifford Wolf 4ac202e2a5 Bugfixes in writing of memories as Verilog 2015-09-25 13:49:26 +02:00
Larry Doolittle 6c00704a5e Another block of spelling fixes 
Smaller this time
 2015-08-14 23:27:05 +02:00
Clifford Wolf 0350074819 Re-created command-reference-manual.tex, copied some doc fixes to online help 2015-08-14 11:27:19 +02:00
Clifford Wolf 84bf862f7c Spell check (by Larry Doolittle) 2015-08-14 10:56:05 +02:00
Clifford Wolf 6c84341f22 Fixed trailing whitespaces 2015-07-02 11:14:30 +02:00
luke whittlesey 2f90499e3d $mem cell in verilog backend : grouped writes by clock 2015-06-08 17:35:40 -04:00
luke whittlesey a8fe040906 Bug fix in $mem verilog backend + changed tests/bram flow of make test. 2015-06-04 16:12:40 -04:00
Clifford Wolf 4744bb95fb Some fixes for $mem in verilog back-end 2015-05-20 13:55:50 +02:00
Clifford Wolf 42348cddd9 Merge pull request #63 from wluker/verilog-backend-mem 
Fixed bug in $mem cell verilog code generation.
 2015-05-11 21:38:06 +02:00
luke whittlesey 3bb5f064b8 Fixed bug in $mem cell verilog code generation. 2015-05-11 14:05:18 -04:00
Clifford Wolf 9e56739634 Disabled broken $mem support in verilog backend 2015-05-10 21:38:41 +02:00
luke whittlesey 6de8fea2c7 Made changes recommended by Clifford Wolf ... 
Removed bit_check_equal(), used RTLIL::SigBit for individual bits, used
dict<> instead of std::map, and used RTLIL::SigSpec instead of
std::vector.
 2015-05-10 11:33:24 -04:00
luke whittlesey 2c1e150297 Verilog backend for $mem cells should now be able to handle different 
write-enable bits and RD_TRANSPARENT parameter settings.
 2015-05-08 15:29:51 -04:00
luke whittlesey c0b68f4848 Added support for $mem cells in the verilog backend. 2015-05-07 13:03:09 -04:00
Clifford Wolf d176e613c2 Minor fixes in handling of "init" attribute 2015-04-09 15:12:26 +02:00
Clifford Wolf b0c0ede879 Added "init" attribute support to verilog backend 2015-04-04 18:06:52 +02:00
Clifford Wolf 67e6dcd34a Added Verilog backend $dffsr support 2015-03-18 08:01:37 +01:00
Clifford Wolf 756b4064b2 Fixed "write_verilog -attr2comment" handling of "*/" in strings 2015-02-13 22:48:10 +01:00
Clifford Wolf 43951099cf Added dict/pool.sort() 2015-01-24 00:13:27 +01:00
Clifford Wolf 146f769bee Cosmetic changes in verilog output format 2015-01-02 22:57:08 +01:00
Clifford Wolf 9e6fb0b02c Replaced std::unordered_map as implementation for Yosys::dict 2014-12-26 21:35:22 +01:00
Clifford Wolf a6c96b986b Added Yosys::{dict,nodict,vector} container types 2014-12-26 10:53:21 +01:00
Clifford Wolf 5df192e71c Added $dffe support to write_verilog 2014-12-20 00:03:20 +01:00
Clifford Wolf 461594bb83 Fixed generation of temp names in verilog backend 2014-11-07 14:40:06 +01:00
Clifford Wolf 4569a747f8 Renamed SIZE() to GetSize() because of name collision on Win32 2014-10-10 17:07:24 +02:00
Clifford Wolf f9a307a50b namespace Yosys 2014-09-27 16:17:53 +02:00
Clifford Wolf 9329a76818 Various bug fixes (related to $macc model testing) 2014-09-06 20:30:46 +02:00
Clifford Wolf 8927aa6148 Removed $bu0 cell type 2014-09-04 02:07:52 +02:00
Clifford Wolf b9cb483f3e Using $pos models for $bu0 2014-09-03 21:20:59 +02:00
Clifford Wolf 5dce303a2a Changed backend-api from FILE to std::ostream 2014-08-23 13:54:21 +02:00
Clifford Wolf f82c978e08 Fixed AOI/OAI expr handling in verilog backend 2014-08-16 22:05:09 +02:00
Clifford Wolf 47c2637a96 Added additional gate types: $_NAND_ $_NOR_ $_XNOR_ $_AOI3_ $_OAI3_ $_AOI4_ $_OAI4_ 2014-08-16 18:29:39 +02:00
Clifford Wolf f092b50148 Renamed $_INV_ cell type to $_NOT_ 2014-08-15 14:11:40 +02:00
Clifford Wolf 746aac540b Refactoring of CellType class 2014-08-14 15:46:51 +02:00
Clifford Wolf 88cf00ce78 Be more conservative with printing decimal numbers in verilog backend 2014-08-02 21:54:02 +02:00
Clifford Wolf ca1b5d50e0 Improved verilog output for ordinary $mux cells 2014-08-02 21:10:08 +02:00
Clifford Wolf b9bd22b8c8 More cleanups related to RTLIL::IdString usage 2014-08-02 13:19:57 +02:00
Clifford Wolf cdae8abe16 Renamed port access function on RTLIL::Cell, added param access functions 2014-07-31 16:38:54 +02:00
Clifford Wolf 27a872d1e7 Added support for "upto" wires to Verilog front- and back-end 2014-07-28 14:25:03 +02:00
Clifford Wolf 7bd2d1064f Using log_assert() instead of assert() 2014-07-28 11:27:48 +02:00
Clifford Wolf 10e5791c5e Refactoring: Renamed RTLIL::Design::modules to modules_ 2014-07-27 11:18:30 +02:00
Clifford Wolf 4c4b602156 Refactoring: Renamed RTLIL::Module::cells to cells_ 2014-07-27 01:51:45 +02:00
Clifford Wolf f9946232ad Refactoring: Renamed RTLIL::Module::wires to wires_ 2014-07-27 01:49:51 +02:00
Clifford Wolf 97a59851a6 Added RTLIL::Cell::has(portname) 2014-07-26 16:11:28 +02:00
Clifford Wolf f8fdc47d33 Manual fixes for new cell connections API 2014-07-26 15:58:23 +02:00
Clifford Wolf b7dda72302 Changed users of cell->connections_ to the new API (sed command) 
git grep -l 'connections_' | xargs sed -i -r -e '
	s/(->|\.)connections_\["([^"]*)"\] = (.*);/\1set("\2", \3);/g;
	s/(->|\.)connections_\["([^"]*)"\]/\1get("\2")/g;
	s/(->|\.)connections_.at\("([^"]*)"\)/\1get("\2")/g;
	s/(->|\.)connections_.push_back/\1connect/g;
	s/(->|\.)connections_/\1connections()/g;'
 2014-07-26 15:58:23 +02:00
Clifford Wolf cc4f10883b Renamed RTLIL::{Module,Cell}::connections to connections_ 2014-07-26 11:58:03 +02:00
Clifford Wolf 5826670009 Various RTLIL::SigSpec related code cleanups 2014-07-25 14:25:42 +02:00
Clifford Wolf c094c53de8 Removed RTLIL::SigSpec::optimize() 2014-07-23 20:32:28 +02:00
Clifford Wolf 28b3fd05fa SigSpec refactoring: change RTLIL::SigSpec::chunks() to be read-only, created interim RTLIL::SigSpec::chunks_rw() 2014-07-22 20:58:44 +02:00
Clifford Wolf 4b4048bc5f SigSpec refactoring: using the accessor functions everywhere 2014-07-22 20:39:37 +02:00
Clifford Wolf a233762a81 SigSpec refactoring: renamed chunks and width to __chunks and __width 2014-07-22 20:39:37 +02:00
Clifford Wolf a30e2857c7 Use functions instead of always blocks for $mux/$pmux/$safe_pmux in verilog backend 2014-07-20 02:16:30 +02:00
Clifford Wolf 0c67393313 Added support for $bu0 to verilog backend 2014-07-20 01:56:16 +02:00
Clifford Wolf fc3b3c4ec3 Added $slice and $concat cell types 2014-02-07 17:44:57 +01:00
Clifford Wolf 369bf81a70 Added support for non-const === and !== (for miter circuits) 2013-12-27 14:20:15 +01:00
Clifford Wolf f4b46ed31e Replaced signed_parameters API with CONST_FLAG_SIGNED 2013-12-04 14:24:44 +01:00
Clifford Wolf 93a70959f3 Replaced RTLIL::Const::str with generic decoder method 2013-12-04 14:14:05 +01:00
Clifford Wolf 41205afc39 Added proper dumping of signed/unsigned parameters to verilog backend 2013-11-24 17:47:22 +01:00
Clifford Wolf 295e352ba6 Renamed "placeholder" to "blackbox" 2013-11-22 15:01:12 +01:00
Clifford Wolf 40d9542647 Implemented $_DFFSR_ expression generator in verilog backend 2013-11-21 21:52:30 +01:00
Clifford Wolf 1dcb683fcb Write yosys version to output files 2013-11-03 21:41:39 +01:00
Clifford Wolf e9dede01ca Fixed handling of boolean attributes (backends) 2013-10-24 11:27:30 +02:00