* enable mixed read-width / write-width ports in SDP mode
* fix NO_CHANGE and WRITE_THROUGH behavior during read access
* remove redundant zero-initialization
* set A/B_WE bit during map (gatemate_bramopt pass could be removed later)
* differentiate "upper" and "lower" initialization for cascade mode
* remove unused techmap models in `map_regs.v`
* replace RAM initilization loops with 320-bit-writes
* add script to test targets in top-level Makefile
* remove `MAXWIDTH` parameter and treat both vector widths individually in `mult_map.v`
* iterate over all modules in `gatemate_bramopt` pass
* xilinx: add SCC test for DSP48E1
* xilinx: Gate DSP48E1 being a whitebox behind ALLOW_WHITEBOX_DSP48E1
Have a test that checks it works through ABC9 when enabled
* abc9 to break SCCs using $__ABC9_SCC_BREAKER module
* Add test
* abc9_ops: remove refs to (* abc9_keep *) on wires
* abc9_ops: do not bypass cells in an SCC
* Add myself to CODEOWNERS for abc9*
* Fix compile
* abc9_ops: run -prep_hier before scc
* Fix tests
* Remove bug reference pending fix
* abc9: fix for -prep_hier -dff
* xaiger: restore PI handling
* abc9_ops: -prep_xaiger sigmap
* abc9_ops: -mark_scc -> -break_scc
* abc9: eliminate hard-coded abc9.box from tests
Also tidy up
* Address review
This change set contains a number of bug fixes and improvements related to
scoping and resolution in generate and procedural blocks. While many of the
frontend changes are interdependent, it may be possible bring the techmap
changes in under a separate PR.
Declarations within unnamed generate blocks previously encountered issues
because the data declarations were left un-prefixed, breaking proper scoping.
The LRM outlines behavior for generating names for unnamed generate blocks. The
original goal was to add this implicit labelling, but doing so exposed a number
of issues downstream. Additional testing highlighted other closely related scope
resolution issues, which have been fixed. This change also adds support for
block item declarations within unnamed blocks in SystemVerilog mode.
1. Unlabled generate blocks are now implicitly named according to the LRM in
`label_genblks`, which is invoked at the beginning of module elaboration
2. The Verilog parser no longer wraps explicitly named generate blocks in a
synthetic unnamed generate block to avoid creating extra hierarchy levels
where they should not exist
3. The techmap phase now allows special control identifiers to be used outside
of the topmost scope, which is necessary because such wires and cells often
appear in unlabeled generate blocks, which now prefix the declarations within
4. Some techlibs required modifications because they relied on the previous
invalid scope resolution behavior
5. `expand_genblock` has been simplified, now only expanding the outermost
scope, completely deferring the inspection and elaboration of nested scopes;
names are now resolved by looking in the innermost scope and stepping outward
6. Loop variables now always become localparams during unrolling, allowing them
to be resolved and shadowed like any other identifier
7. Identifiers in synthetic function call scopes are now prefixed and resolved
in largely the same manner as other blocks
before: `$func$\func_01$tests/simple/scopes.blk.v:60$5$\blk\x`
after: `\func_01$func$tests/simple/scopes.v:60$5.blk.x`
8. Support identifiers referencing a local generate scope nested more
than 1 level deep, i.e. `B.C.x` while within generate scope `A`, or using a
prefix of a current or parent scope, i.e. `B.C.D.x` while in `A.B`, `A.B.C`,
or `A.B.C.D`
9. Variables can now be declared within unnamed blocks in SystemVerilog mode
Addresses the following issues: 656, 2423, 2493
The presence of IS_*_INVERTED on FD* cells follows Vivado, which
apparently has been decided by a dice roll. Just assume false if the
parameter doesn't exist.
Fixes#2559.
* xilinx: eliminate SCCs from DSP48E1 model
* xilinx: add SCC test for DSP48E1
* Update techlibs/xilinx/cells_sim.v
* xilinx: Gate DSP48E1 being a whitebox behind ALLOW_WHITEBOX_DSP48E1
Have a test that checks it works through ABC9 when enabled
Quartus assumes unsigned multiplication by default, breaking signed
multiplies, so add an input signedness parameter to the MISTRAL_MUL*
cells to propagate to Quartus' <family>_mac cells.
The techmap rules for this target do not work in the first place (note
lack of >2-input LUT mappings), and if proper support is ever added,
it'd be better placed in the synth_intel_alm backend.
Patrick Urban
Marcelina Kościelnicka
Pepijn de Vos
Claire Xenia Wolf
Olivier Galibert
Eddie Hung
kittennbfive
ECP5-PCIe
Sylvain Munaut
Maciej Dudek
gatecat
Adam Greig
Michael Christensen
Lofty
Stefan Riesenberger
William D. Jones
Zachary Snow
Tom Verbeure
whitequark
David Shah
Miodrag Milanović
Konrad Beckmann
clairexen
Jeff Goeders