The handler for "arm9tdmi vector_catch ..." did not check
if target has already been examined. Without this fix it
segfaults when using NULL pointer "arm7_9->eice_cache".
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Print "ssize_t" as "%ld" (+ cast to long) not as "%zu".
Official MinGW (gcc 3.4.5) doesn't understand "z" flag.
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Most of this patch updates documentation and comments for various
Luminary boards, supporting two bug fixes by helping to make sense
of the current mess:
- Recent rev C lm3s811 eval boards didn't work. They must use
the ICDI layout, which sets up some signals that the older
boards didn't need. This is actually safe and appropriate
for *all* recent boards ... so just make "luminary.cfg" use
the ICDI layout.
- "luminary-lm3s811.cfg", was previously unusable! No VID/PID;
and the wrong vendor string. Make it work, but reserve it
for older boards where the ICDI layout is wrong.
- Default the LM3748 eval board to "luminary.cfg", like the
other boards. If someone uses an external JTAG adapter, all
boards will use the same workaround (override that default).
The difference between the two FT2232 layouts is that eventually
the EVB layout will fail cleanly when asked to enable SWO trace,
but the ICDI layout will as cleanly be able to enable it. Folk
using "luminary.cfg" with Rev B boards won't see anything going
wrong until SWO support is (someday) added.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Otherwise the new alignment checking algorithm thinks that the
address is not aligned, because it is way beyond the last sector.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Resolve a regression when using newish automagic "write_image"
modes, by always padding to the end of affected sectors.
Also document some issues associated with those automagic options,
in the User's Guide and also some related code comments.
We might need similar padding at the *beginning* of some sectors,
but this is a minimalist fix for the problems which have currently
been reported (plus doc updates).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The 10-pin JTAG layout used with these adapters is used by
a variety of platforms including AVR.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
It's less accepting of signed char ... insisting that e.g. tolower()
not receive one as a parameter.
It's probably good to phase out such usage, given the number of bugs
that lurk in the vicinity (assumptions that char is unsigned), so fix
these even though such usage is actually legal.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Misc:
- Introduce some "struct reg" temporaries, for clarity
- Shorten lines
- Add some missing whitespace
- Clean up comments
- Add notes about some fault handling issues
- Most of these errata workarounds are for *OLD* chip revisions
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
And add my copyright. MPCore is untested, but it's the
only other ARM11 core to care about.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Command "reset halt" checks if PC properly resets, issueing warning:
"PC was not 0. Does this target need srst_pulls_trst?".
Checking PC against 0 is not always correct.
Removed PC value check, as suggested by Øyvind Harboe.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: U-PROPRIET-28D9DF\PROPRIETAIRE <PROPRIETAIRE@propriet-28d9df.(none)>
This creates the TCL interface for configuring an AT91SAM9 NAND flash
controller and implements the necessary functions to correctly work with
a NAND flash device connected to the chip. This includes updates to the
driver list and the Makefile.am to support building the driver and also
houses the documentation update in openocd.texi.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
In conjunction with manual register setup, this lets the ETM trigger
cause entry to debug state. It should make it easier to test and
bugfix the ETM code, by enabling non-trace usage and isolating bugs
specific to thef ETM support. (One current issue being that trace
data collection using the ETB doesn't yet behave.)
For example, many ARM9 cores with an ETM should be able to implement
four more (simple) breakpoints and two more (simple) watchpoints than
the EmbeddedICE supports. Or, they should be able to support complex
breakpoints, incorporating ETM sequencer, counters, and/or subroutine
entry/exit criteria int criteria used to trigger debug entry.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Change handling of the CYCLE_ACCURATE, BRANCH_OUTPUT, and
TRACE_* flags; also the CONTEXTID size values.
- Convert to symbols matching the actual register bits, instead of
some random *other* bits (and then correcting that abuse).
- Get rid of a now-needless enum.
- Keep those values in etm->control, and remove etm->tracemode.
These values all affect the trace data that's recorded by a trace
pod or in the ETB. I modified the file format used to dump ETB
data; since it's fairly clear nobody can use this mechanism now,
this can't cause anyone trouble.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Provide better comments for the ETM_CTRL bits; use the correct bit
for half/full clock mode; and define a few more of the bits available
from the earliest ETM versions.
The new bit defintions use ETM_CTRL_* names to match their register
(instead of ETM_PORT_* or ETMV1_*). For clarity, and better matching
to docs, they are defined with bitshifting not pre-computed masks.
Stop abusing typdefs for ETM_CTRL values; such values are not limited
to the enumerated set of individual bit values.
Rename etm->portmode to etm->control ... and start morphing it into a
single generic shadow of ETM_CTRL. Eventually etm->tracemode should
vanish, so we can just write etm->control to ETM_CTRL.
Restore an "if" that somehow got dropped.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This command was misplaced; it's not generic to all traceport drivers,
only the ETB supports this kind of configuration. So move it, and
update the relevant documentation.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Much to my surprise, I observed a "flash erase_address ..."
command erasing data which I said should not be erased.
The issue turns out to be generic NOR flash code which was
silently, and rather dangerously, morphing partial-sector
references into unrequested whole-sector ones.
This patch removes that low-level morphing. If desired, it
can and should be done in higher level code. (We might need
to fix some stuff in the GDB server code.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
It's currently allocating a big buffer but writing it out in
units of sizeof(host's pointer) ... sub-optimal.
Plus fix a couple minor coding style goofs.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Word count == size/4; cope. And increase buf_min so it's large
enough to cover the overhead in my tests.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
We can actually do the right thing if the MMU is off; save
the error message for the phys-but-MMU-enabled path, which
is what isn't yet supported.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Try to right-size the SRAM buffers, by not:
- using them for very small writes
- giving up when a large buffer isn't available
- allocating buffers much larger than their data
Also don't:
- bother loading the code unless we allocate the writebuffer too
- be so verbose with messaging:
* be more concise
* reduce importance (e.g. DEBUG not WARNING)
* remove duplication
The minimum buffer size is something of a guess. It's eight
times smaller than before, almost the same size as the code
being downloaded. It probably deserves some tuning.
Also, note an erratum affecting flash protection on some chips;
and narrow many over-wide lines affected by the above changes.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Refactored the write page raw function into two new functions
for writing data to a NAND device and then another function to
finish up a write to a NAND device. This includes some new
updates to introduce more error checking to existing code.
[dbrownell@users.sourceforge.net: fix fault handling, whitespace]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Added a new function to encapsulate reading a page of data from
a NAND device using either the read_block_data function of a NAND
controller or to use direct reading of data from the NAND device.
This also adds some performance enhancements and uses the read_data
function if the read_block_data function fails safely (because it
can't allocate a buffer in the working area).
[dbrownell@users.sourceforge.net: fix fault handling, whitespace]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Tweak the "scan_chain" output by removing column separators. Also
remove the "current instruction" state ... which changes constantly.
Now its style resembles the "targets" output, and can even fit on
one line in standard terminals and in the PDF docs.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Someday revisit various issues: Tempest parts support writing
more than one word at a time; for some target firmware it might
be necessary to save and restore flash IRQ configuration. (The
safest policy is likely to always reset after flash updates.)
Plus swap some undesirable TAB characters with SPACE.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Fix potential memory leak: make sure the per-bank data
structures are only allocated in probe(), and that calling
probe() multiple times is a NOP. Use it for auto_probe().
Require probe() to have done its thing: don't make access
routines cope with it not having been called. Shrink a
bunch of failure paths; and in some cases, correct them.
Don't needlessly insist on a halted target for probe().
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
No point in reading and discarding a status value when fetching
part description data. Or having that needless "#if 0" code.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Previously "reading" clock info (and part info) also, as a side
effect, wrote the flash timing register. Instead, be more safe:
"reading" should only read. Write paths still refresh timing,
coping with changes the application code may have made.
Also rename the routine which sets flash timing, indicating what
it's really doing; it's got nothing to do with a "mode".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
By exhausting data on input, the performance will be more
consistent + the code more clearly distinguishes between
polling and processing. A test showed gdb packet load
performance go from ~1550kByte/s to 1650kBytes/s + being
more stable.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Teach ARM11 how to use:
- the new "reset-assert" event
- vector catch to implement "reset halt"
- use SRST more like other cores do
- ... including leaving post-SRST delays up to config scripts
This gives OMAP2420 the ability to reset, and doesn't seem to
cause new iMX31 problems.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
I added the remaining devices and device IDs to stellaris.c, and
removed several devices that don't exist on the Stellaris web page.
Additionally, I found a few devices with duplicate IDs ... the DID1
Version Number for LM3Sxxx parts have DID1 Version = 0x0, and for
LM3Sxxxx have DID1 Version = 0x1. So I extended the comparison to
use the VER and FAM fields from DID1 also.
ID=0x33: LM3S812 (DID1v0) and LM3S2616 (DID1v1)
ID=0x39: LM3S808 (DID1v0) and LM3S2276 (DID1v1)
These are the parts I removed from the file for lack of documentation
(no data sheet to confirm part ID):
LM3S318,
LM3S1101, LM3S1108,
LM3S1615, LM3S1616,
LM3S2016,
LM3S2101, LM3S2108,
LM3S3759, LM3S3768,
LM3S5757, LM3S5767, LM3S5768, LM3S5769,
LM3S6815, LM3S6816,
LM3S6915, LM3S6916,
LM3S6111, LM3S6118.
Also, sort devices according to part number.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Add a "-ignore-version" to "jtag newtap" which makes the IDCODE
comparison logic optionally ignore version differences.
Update the "scan_chain" command to illustrate this by showing
the "*" character instead of the (ignored) version nibble.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Make these ".h" files adopt the same policy the ".c" files already
follow: don't use <subsystem/...h> syntax for private interfaces.
If we ever get reviewed/supported "public" interfaces they should
come exclusively from some include/... directory; that'll be the
time to switch to <...> syntax for any subsystem's own interfaces.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Don't include <helper/jim.h> from target.h ... not everything
which touches targets needs to be able to talk to Jim. Plus,
most files include this header by another path.
Also, switch the affected files to use the classic sequence
for #included files: all <framework/headers.h> first, then
the "local_headers.h". This helps prevent growth of problematic
layering, by minimizing entanglement.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
For some routines that only returned ERROR_OK and where the
caller never checked ... don't bother. Remove some noise,
and bugfix some comments.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Abstract the DPM breakpoint and watchpoint data structures to
have a shared core for housekeeping.
Abstract the code updating the watchpoint registers so that it
can be used to update breakpoint registers. Then do so, when
something has set up the breakpoint state used by this code.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Properly detect all of these, including the "2" variants;
and bugfix parameter display for LDC and STC.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
ITR register handling seemed to be giving me problems, so I updated
the comments to better say what the code is trying to do ... and to
note the preconditions (one of which seems to be an issue) as listed
in the ARM1136 TRM.
Also removed the unused "ARM11_TAP_DEFAULT" from the ITR scan code;
all the callers already specify an exit path, since this register
isn't usable with such vague semantics.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This fixes the issue under native win32 of the socket interface not being
enabled (via WSAStartup) before init is called from a script.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
I neglected to copy Magnus' copyright when I moved several
declarations from the ARMv7-M header.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Bugfix the read side of flash protection:
- read the right register(s)!
- handle more than 64K
- record the results in the right places
- don't display garbage.
Partially bugfix the write side:
- use 2KB lock regions instead of 1KB pages (!)
- validate input range
- don't try to _remove_ protection (it's write-once)
- #define values we'll need to commit writes.
- ... still doesn't handle pages over 64KB mark, or commit writes
And minor cleanup and fixes:
- get rid of some forward decls
- properly locate a doxygen comment
- fix some bad indentation
- remove superfluous #include
- add a new part ID (many are still missing)
- make the downloaded algorithm code be read-only
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
These were all basically "can't happen" cases ... like having
state be corrupted by an alpha particle after the previous check
for whether a value was in-range.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Most of these happened to be in the target.h file.
Some of those are associated with symbols that could be
removed at some point ... e.g. NVP_ASSERT/true and its
sibling NVP_DEASSERT/false.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The exception being declarations for drivers. Those should
be split out in some clean way -- like driver add/remove calls
made by initialization code -- but that's for another day.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
It's as if despite integers being 32-bits, GCC refuses to
convert a "uint32_t" to one of them.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Low latency low CPU processing power systems(embedded)
will benefit greatly from being able to inline certain
jtag_add_xxx() fn's. The trick is that this has to be
done in such a way as to allow implementing an OpenOCD
API with a shared library(eventually) on a PC hosted
OpenOCD.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Some versions of GCC don't understand that if you mask with 0x3
then have cases 0-3, it's not possible for a variable assigned in
all those branches to have no value at end-of-case. Feh.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
When starting up, say how many hardware breakpoints and watchpoints
are available on various targets.
This makes it easier to tell GDB how many of those resources exist.
Its remote protocol currently has no way to ask OpenOCD for that
information, so it must configured by hand (or not at all).
Update the docs to mention this; remove obsolete "don't do this" info.
Presentation of GDB setup information is still a mess, but at least
it calls out the three components that need setup.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Provide and use debug_reason_name() instead of expecting targets
to call Jim_Nvp_value2name_simple(). Less dependency on Jim, and
the code becomes more clear too.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Have various ARM cores delegate to arm_arch_state() to display
basic information, instead of duplicating that logic.
This shrinks the code, makes them all report when semihosting
is active, and highlights which data are specific to this core.
(Like ARM720 not having separate instruction and data caches.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Move most declarations in <target/armv4_5.h> to <target/arm.h>
and update users.
What's left in the older file is stuff that I think should be
removed ... the old register cache access stuff, which makes it
awkward to support microcontroller profile (Cortex-M) cores.
The armv4_5_run_algorithm() declaration was moved too, even
though it's not yet as generic as it probably ought to be.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Rename some (mostly) generic ARM functions:
armv4_5_arch_state() --> arm_arch_state()
armv4_5_get_gdb_reg_list() --> arm_get_gdb_reg_list()
armv4_5_init_arch_info() --> arm_init_arch_info()
Cores using the microcontroller profile may want a different
arch_state() routine though.
(Also fix strange indentation in arm_arch_state: use tabs only!
And update a call to it, removing assignment-in-conditional.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Move the ARM opcode macros from <target/armv4_5.h>, and a few
Thumb2 ones from <target/armv7m.h>, to more appropriate homes
in a new <target/arm_opcodes.h> file.
Removed duplicate opcodes from that v7m/Thumb2 set. Protected
a few macro argument references by adding missing parentheses.
Tightening up some of the line lengths turned up a curious artifact:
the macros for the Thumb opcodes are all 32 bits wide, not 16 bits.
There's currently no explanation for why it's done that way...
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Get rid of mrc_opcode() in favor of ARMV4_5_MRC() or, where
arm*20t should have used it, ARMV4_5_MCR() instead.
Basically, *writing* coprocessor registers shouldn't have
used the *read* opcode ... and both should stick to standard
opcode constructors, not rearranging parameter sequence any
more than already needed.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The SRS and RFE instructions speed exception entry/exit by
making it easy to save and restore PC and SPSR. This handles
both ARM and Thumb2 encodings.
Fix minor PLD goofage; that "should never reach this point"
can't happen, so remove it.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The low two bits are defined as should-be-zero-or-presereved.
We'll take the zero option, it's easier to enforce.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Rename the existing 'flash banks' implementation as 'flash list', and
replace the broken 'flash_banks' TCL wrapper with a new command handler.
Adds documentation for the new 'flash list' command in the user guide.
The 'flash banks' command produces a list that needs to be formatted
properly for GDB's 'mem info' to work properly. The flash_banks TCL
wrapper provided this formatting, but wrappers no longer work for
second-level commands as they did in the past. With this patch,
the 'flash_banks' command can be used with the new command syntax
and display the required information.
More updates from the code review by Steve Grubb <sgrubb@redhat.com>.
The Jim float-comparision bug just gets a comment not a fix, though.
Cc: Steve Grubb <sgrubb@redhat.com>.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Fall back to software breakpoint when vector catch isn't available.
Possible enhancements:
- add extra optional command parameter to select high vectors
- add extra optional command parameter to select hardware breakpoint
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Rename nand.h as flash/nand/core.h, chase consumers. The public APIs
need to be sorted out with imp.h, but this allows other changes to
begin improving the separation between policy and mechanism.
Moves #include <target/target.h> and #include "driver.h" into the
internal headers or source files, removing it from <flash/nand/core.h>.
Moves commands into nand/tcl.c and core implementation to 'nand/core.c'
and 'nand/fileio.c'. Eliminates 'flash/nand.c'.
Adds 'nand/imp.h' to share routines between TCL commands and core.
This work parallels the NOR directory, encapsulating the NAND drivers
into a separate file. This takes an extra step by encapsulating the
type of data structure used to manage the drivers, allowing it to be
changed from an array to a dynamic list in the future.
Remove an undesirable use of the CPSR symbol ... it needs to vanish.
Flag mode-to-number stuff as obsolete; say why ... should also vanish.
Get rid of no-longer-used mode and state typedefs.
Comment a few of the implicit ties to "classic ARM".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
As with Cortex-A8, the WFAR register holds useful information
that should be recorded and, where relevant, displayed.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Tweak scanchain 7 debug messaging:
- show register addresses in decimal, matching ARM docs;
- remove some pointless noise
Avoid some needless roundtrips:
- skip SCAN_N when SCREG already holds that number (speeds up
polling and other common operations)
- avoid zeroing vcr twice on resume
Show the IR opcode as a label ("RESTART") too; and in decimal,
matching ARM docs.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Move the bulk of the flash.h file into flash/nor/core.h, leaving an
empty husk that will be removed in the next patch.
The NOR driver structure is an implementation detail, so move it into
its own private header file <flash/nor/driver.h> along with helper
declaration for finding them by name.
Splits the exec mode commands out of flash.c into the flash/nor/ files.
The routines used by these high-level commands are moved into nor/core.c,
with their internal declarations placed in nor/imp.h.
Fixes distribution of <flash/nor/core.h> header.
Clean up arm_semihosting() entry a bit, comment some issues and just
which SVC opcodes are getting intercepted. Microcontroller profile
cores will need a new entry, since they use BKPT instead (and don't
have either SVC mode or an SPSR register).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Store a flag and errno in in "struct arm".
Have "poll" output report when semihosting is active.
Shrink some of the affected lines.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The newly moved flash TCL routines access the internals of the module
too much. Fix the layering issues by adding new core NOR flash APIs:
<flash/nor/core.h>:
- flash_driver_find_by_name() - self-descriptive
<flash/nor/imp.h>:
- flash_bank_add() - encapsulates adding banks to bank list
- flash_bank_list() - encapsulates retreiving bank list
This allows the externs in flash/nor/imp.h to be removed, and
these mechanisms may now be re-used by other flash module code.
Moves the top-level 'flash' command handlers into flash/nor/tcl.c,
with flash/nor/imp.h providing an internal implementation header
to share non-public API components.
After previous efforts, only one Jim routine remained in jtag/core.c,
and moving it to jtag/tcl.c painlessly finishes separating these layers.
The headers need separating, but the implementation is clean.
When calling module_register_commands, the return value needs to be
checked for failures. Instead of duplicating code, use an array of
function pointers to the identical registration functions to iterate
over during startup.
Semihosting enables code running on an ARM target to use the
I/O facilities on the host computer. The target application must
be linked against a library that forwards operation requests by
using the SVC instruction that is trapped at the Supervisor Call
vector by the debugger. The "hosted" library version provided
with CodeSourcery's Sourcery G++ Lite for ARM EABI is one example.
This is currently available for ARM9 processors, but any ARM
variant should be able to support this with little additional work.
Tested using binaries compiled with Sourcery G++ Lite 2009q1-161
and ARM RVCT 3.0.
[dbrownell@users.sourceforge.net: doc tweaks, NEWS]
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Updates the ARM NAND I/O code to look at and update the op
field of arm_nand_data to reflect the last operation performed.
It uses this field to copy the correct code to the target in the
case where the struct is used for reads and writes.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Modify the arm_nand_data struct to better support both read and
write operations while using the same struct. An additional
field was added, and initialized, to record the last operation
so that the correct code can be loaded to the working area.
[dbrownell@users.sourceforge.net: merge init patch, tweak GPL note]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Created a new function that handles sending a command and the address
information for pages to a NAND device.
[dbrownell@users.sourceforge.net: tweaked line lengths, name 'oob_only']
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Punt to the armv4_5_arch_state() for all the common stuff, to
shrink code and so we will get any improvements it provides.
Don't hide watchpoint status if we happen to be in "abort" mode.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
No point in both ARM11 and Cortex-A8 having private copies
of the logic sorting out e.g. DBG_REASON_WATCHPOINT.
Add and use a shared routine for this ... there's actually
a bunch more debug entry logic that could be shared, this
is just a start on that. Note that this routine fixes a
bug observed in the ARM11 code, where some abort mode quirks
were displayed as being an unknown debug reason; and also
silences needless ARM11 chatter.
Likewise with private copies of DSCR ... add one to the DPM
struct. Save it as part of setting DBG_REASON_* so later
patches can switch over to using that copy.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
For the bits now defined in "arm_dpm.h", switch to the
shared DSCR_* symbol and remove the ARM11_DSCR_* version.
Define DSCR_INT_DIS and use it instead of the ARM11_DSCR_*
sibling symbol. (Note: for both ARM11 and Cortex-A8, this
should arguably be enabled by default when single stepping.)
Remove some other unused declarations in "arm11.h".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Move the symbols for these bits from "armv7a.h" to "arm_dpm.h",
where they can be seen and used not just by Cortex-A but also
by the ARM11 (armv6) code.
Change them from bit numbers to bit masks ... this matches the
usage in ARM11 code, and also makes it easier to read.
Rename DSCR_EXT_INT_EN as DSCR_ITR_EN to match the docs; it's
enabling ITR functionality, not external interrupts, so this
changes the name to be less misleading. (There *IS* a bit
affecting interrupts, and this isn't it.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This makes Beagle work again, instead of losing horribly because
the JTAG event handlers are no longer able to e.g. "runtest". I
get the previous quirky behavior ... comes up OK but "reset halt"
somewhat mysteriously makes it all better. (Instead of nothing
being able to work at all...) However, I'm still seeing:
The 'init' command must be used before 'init'.
That seems to come from invoking "jtag init", sometime after it
gets mapped to "ocd_jtag init", according to debug message traces.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
To prevent regression in the behavior of 'init', we allow it to run in
any mode. If provided with -c init and with -c noinit, then the second
init at startup caused a spurious mode failure. Let 'init' handle it.
Use a separate variable for iterating GDB service port numbers than
the one set by the user. Restores the behavior of returning the
original port number and only incrementing the port used on success.
now compiles again after include files were moved about
to reduce -I usage and stop using quotes but rather
angle brackets for include files.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Before we can -I the top-level src/ directory alone, references to
"hello.h" must be updated. This is an internal header, so it does
not need angle brackets.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "xsvf.h"
the following form should be used.
#include <xsvf/xsvf.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "svf.h"
the following form should be used.
#include <svf/svf.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "pld.h"
the following form should be used.
#include <pld/pld.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "telnet_server.h"
the following form should be used.
#include <server/telnet_server.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "server.h"
the following form should be used.
#include <server/server.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "httpd.h"
the following form should be used.
#include <server/httpd.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "gdb_server.h"
the following form should be used.
#include <server/gdb_server.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "s3c24xx_regs.h"
the following form should be used.
#include <flash/nand/s3c24xx_regs.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "ocl.h"
the following form should be used.
#include <flash/nor/ocl.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "nand.h"
the following form should be used.
#include <flash/nand.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "mflash.h"
the following form should be used.
#include <flash/mflash.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "flash.h"
the following form should be used.
#include <flash/flash.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm_nandio.h"
the following form should be used.
#include <flash/arm_nandio.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "trace.h"
the following form should be used.
#include <target/trace.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "target_request.h"
the following form should be used.
#include <target/target_request.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "target.h"
the following form should be used.
#include <target/target.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "register.h"
the following form should be used.
#include <target/register.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "mips_ejtag.h"
the following form should be used.
#include <target/mips_ejtag.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "mips32_pracc.h"
the following form should be used.
#include <target/mips32_pracc.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "mips32.h"
the following form should be used.
#include <target/mips32.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "image.h"
the following form should be used.
#include <target/image.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "etm.h"
the following form should be used.
#include <target/etm.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "embeddedice.h"
the following form should be used.
#include <target/embeddedice.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "breakpoints.h"
the following form should be used.
#include <target/breakpoints.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "avrt.h"
the following form should be used.
#include <target/avrt.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "armv7m.h"
the following form should be used.
#include <target/armv7m.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "armv7a.h"
the following form should be used.
#include <target/armv7a.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "armv4_5_mmu.h"
the following form should be used.
#include <target/armv4_5_mmu.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "armv4_5_cache.h"
the following form should be used.
#include <target/armv4_5_cache.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "armv4_5.h"
the following form should be used.
#include <target/armv4_5.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm_jtag.h"
the following form should be used.
#include <target/arm_jtag.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm_dpm.h"
the following form should be used.
#include <target/arm_dpm.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm_adi_v5.h"
the following form should be used.
#include <target/arm_adi_v5.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm9tdmi.h"
the following form should be used.
#include <target/arm9tdmi.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm966e.h"
the following form should be used.
#include <target/arm966e.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm7tdmi.h"
the following form should be used.
#include <target/arm7tdmi.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm7_9_common.h"
the following form should be used.
#include <target/arm7_9_common.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm11.h"
the following form should be used.
#include <target/arm11.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "algorithm.h"
the following form should be used.
#include <target/algorithm.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "minidriver.h"
the following form should be used.
#include <jtag/minidriver.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "jtag.h"
the following form should be used.
#include <jtag/jtag.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "interface.h"
the following form should be used.
#include <jtag/interface.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "commands.h"
the following form should be used.
#include <jtag/commands.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "types.h"
the following form should be used.
#include <helper/types.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "time_support.h"
the following form should be used.
#include <helper/time_support.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "replacements.h"
the following form should be used.
#include <helper/replacements.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "membuf.h"
the following form should be used.
#include <helper/membuf.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "log.h"
the following form should be used.
#include <helper/log.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "jim.h"
the following form should be used.
#include <helper/jim.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "ioutil.h"
the following form should be used.
#include <helper/ioutil.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "fileio.h"
the following form should be used.
#include <helper/fileio.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "configuration.h"
the following form should be used.
#include <helper/configuration.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "command.h"
the following form should be used.
#include <helper/command.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "binarybuffer.h"
the following form should be used.
#include <helper/binarybuffer.h>
The exception is from .c files in the same directory.
Includes the src directory in the search path, so header files may be
migrated from:
#include "foo.h"
to
#include <module/foo.h>
which is more conducive for installation.
Moves JTAG interface drivers to src/jtag/drivers/,
Adds src/jtag/drivers/Makefile.am.
Builds libocdjtagdrivers.la.
Flattens the rlink driver files into the drivers/ directory, adding
the 'rlink_' prefix or '.rlink' suffix as appropriate.
Remove the remaining extra copy of DSCR, and the register cache
of which it was a part. That cache wasn't a very safe, or even
necessary, idea; it was essentialy letting debugger-private state
be manipulated by Tcl code that couldn't know how to do it right.
This makes the "reg" output of an ARM11 resemble what most other
ARM cores produce ... forward motion in the "make ARM11 work like
the rest of the ARM cores" Jihad!
Just store a clean copy of DSCR in the per-CPU struct, so we
trivially pass a pointer to a recent copy. This replaces the
previous "last_dscr" and cleans up most of the related calling
conventions ... but it doesn't remove the other DSCR copy.
Don't expose the WDTR register through the register cache any
more. If anyone wants Tcl scripts to be able to use DCC based
communication with app code in the target, this wouldn't do it.
Bugfix: don't trust the Tcl-accessible version of DSCR to
flag whether WDTR needs to be restored when resuming.
Don't expose the RDTR register through the register cache any
more. If anyone wants Tcl scripts to be able to use DCC based
communication with app code in the target, this wouldn't do it.
Bugfix: don't trust the Tcl-accessible version of DSCR to
flag whether RDTR needs to be restored when resuming.
Streamline arm11_on_enter_debug_state() entry:
- It should handle the standard updates:
* target->debug_reason
* target->state
- Don't waste time re-reading DSCR; just pass it in
Also rename the routine to "arm11_debug_entry()", matching the
convention used elsewhere in OpenOCD.
The new stubs for httpd and ioutil gave errors like:
ioutil_stubs.c: In function ‘ioutil_init’:
ioutil_stubs.c:27: error: implicit declaration of function ‘LOG_DEBUG’
ioutil_stubs.c:28: error: ‘ERROR_OK’ undeclared (first use in this function)
ioutil_stubs.c:28: error: (Each undeclared identifier is reported only once
ioutil_stubs.c:28: error: for each function it appears in.)
Fix.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Add httpd_stubs.c to provide no-op implementations of httpd_start()
and httpd_stop().
Allows these routines to be called unconditionally and ensures the
libocdserver ABI remains unchanged regardless of whether this feature
was built-in or not.
Prints a DEBUG message when the stub implementation is included.
Add ioutil_stubs.c to provide an empty ioutil_init() routine.
Add ioutil.h to prevent applications from needing to declare it.
Allows unconditionally calling that function during startup, and the
resulting libocdhelper library API is now more stable.
Prints a DEBUG message when the stub implementation is included.
Save and display the address of the instruction which triggered the
watchpoint. Because of pipelining, that's well behind the PC value
when debug entry completes. (Example in a subroutine that had been
returned from...)
Remove unused A8 stuff, mostly watchpoint hooks from the header.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Except for USR/SYS mode, the labels for the shadowed SP and LR
registers were reversed. LR is r14; SP is r13. Fix.
This would not affect GDB users; GDB references are positional.
Only folk working directly with OpenOCD register values would
have noticed this bug.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Actually this should handle both breakpoints and watchpoints ... but
the DPM framework only handles watchpoints for now. Works on Beagle.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This is a NOP unless the underlying core exposes two new methods, and
neither of the two cores using this (ARM11xx, Cortex-A8) do so yet.
This patch only updates those cores so they pass a flag saying whether
or not to update breakpoint and watchpoint status before resuming; and
removing some now-needless anti-segfault code from ARM11. Cortex-A8
didn't have that code ... yes, it segfaulted when setting watchpoints.
NOTE: this uses a slightly different strategy for setting/clearing
breakpoints than the ARM7/ARM9/etc code uses. It leaves them alone
unless it's *got* to change something, to speed halt/resume cycles
(including single stepping).
ALSO NOTE: this under-delivers for Cortex-A8, where regions with size
up to 2 GBytes can be watched ... it handles watchpoints which ARM11 can
also handle (size 1/2/4 bytes). Should get fixed later.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
In embedded hosts, the Jim interpreter can come from the
existing context rather than be created by OpenOCD.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
We don't need this code, now that the DPM code handles it.
Neither do we need the ARMv7-A CP15 operations; remove their
remnants too. And disable a mostly-needless diagnostic.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Instead of having separate ARM11 and Cortex-A8 implementations of
this code, have one shared implementation which just builds on the
existing "run instruction via R0" support.
This enables followup patches to remove that now-unused code from
those two drivers. (Patches to move the "mrc" and "mcr" code into
"struct arm" are due too ... MIPS and other cores do not support
those ARM-specific concepts.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Switch "mrc" and "mcr" commands to be toplevel ARM operations,
as they should initially have been.
Correct the usage message for both commands: it matches ARM
documentation (as one wants!) instead of reordering them to
match the funky mrc() and mcr() method usage (sigh).
For Cortex-A8: restore a line that got accidentally dropped,
so the secure monitor mode shadow registers will show again.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The ARMv7-A code uses read_cp15() to access fault registers.
Instead, use DPM operations directly, passing in the relevant
MRC instructions.
This eliminates per-operation overhead (though it'll be hard
to observe, this is uncommon) and helps eliminate read_cp15().
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
There were two chunks of Cortex-A8 code which called the
ARMv7-A CP15 operations; get rid of them, helping prepare
to remove those methods completely:
- post_debug_entry() can use the mrc() method to read
its two registers.
- write_memory() can use dpm->instr_write_data_r0() to
flush the ICache and DCache ... doing it this way is
actually faster since it reduces per-write overhead.
Note that the mrc() method parameters are re-ordered with
respect to the ARM instruction documentation, so that part
can be confusing.
Cleaned up the layout and comments in those areas a bit.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
There is no particular reason to invoke jtag_interface_quit()
on the atexit() handler, it just makes the code more obtuse
and stops other legitimate usage of atexit().
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Ensures that the correct information gets displayed, depending on the
mode of the command being denied. Fixes misreporting all commands as
needing to run "before 'init'".
Clean up two aspects to this routine: bad naming, since it
doesn't restore the context, just the banked registers; and
excess indentation for the bulk of the code.
Also make some of its call sites stash the function's return
code; someday they should use it for error checking.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This "loop over all registers" routine shared the same mess as
full_context() in terms of dozens of needless number_to_mode()
calls. Fix that, and comments, with related cleanup.
The misnamed xscale_restore_context() had a related bug. It
was restoring the *WRONG REGISTERS* ... always from whatever
the current mode was, instead of using the copy from whichever
register bank it was trying to restore. (But it marked the
intended register as having been restored...) Fixed that.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Finish removing references to the 'interp' global variable from the
command module, encapsulating all reference via command_context.
Eliminates use of the global entirely, so it can be removed. Hurrah!
Adds a log_capture_state structure to pass to the log capture
callback used by the command module. Ensures that the capture occurs
in the proper context.
The 'help' text will become more verbose, so its entire text will be
far more than desired when you only borked your syntax. The usage
still allows the commands to be looked up for more help.
command_done() does not need to return an error, but it needed
Doxygen comment. Provide some for copy_command_context as well.
Note: this audit revealed some potential bugs with the command context
implementation. There was a reason that commands were added at the
end of the list. Shallow copying of command_context means that
the list is shared between them. And commands added at the top-level
before the pre-existing commands will not be available in the shared
context as they were before. Yikes!
Fortunately, this does not seem to occur in general use, as
'add_help_text' gets registered in startup.tcl and claims the first slot
in my own test cases. Thus, it seems that we have been masking the issue
for now, but it shows the need for further architectural improvement in
the core command module.
With the ability to defer 'init', users can access the help system while
still in CONFIG mode. This patch omits commands from the help and usage
list when they cannot be run in the current command mode, making it much
easier to see what can be done at a given time.
Adds 'noinit' command to prevent OpenOCD from running 'init' at the end
up startup, allowing it to be given from telnet or TCL. This provides
the old behavior by default, and users can add this command to their
scripts to get the new behavior.
Moves the telnet and TCL server startup to server_init(), moving their
respective command registration in to server_register_commands().
Adds proper error checking for these particular startup processes.
Moves the core server startup to openocd_main(), improving related error
checking and preparing to defer 'init'.
Rework gdb_init to create flexible APIs (gdb_target_add_{one,all}) and
static helper (gdb_target_start) for starting GDB services. Eliminates
duplicated code and provides general mechanisms for adding GDB services.
The 'init' command is updated to call the new API, and later patches can
decouple its policy of adding all targets therein.
Provides the new capability to use both piped and TCP servers when
multiple targets are defined. The first target fills the pipe, and
others will be started on TCP ports (unless disabled, i.e. gdb_port=0).
Add missing COMMAND_REGISTRATION_DONE.
For now the command syntax for zy1000 needs to be compatible
across 0.3/0.4, the world outside OpenOCD interfaces to
zy1000 using the old syntax. Post 0.4 release(0.4.1 even)
I'll switch to subcommand scheme.
Switch to subcommands post 0.3 lifecycle.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Streamline the loop by continuing as soon as we know there's no
work to be done; this lets us un-indent almost everything.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
When fetching all the registers, XScale was doing various stupid
things like calling number_to_mode() a few dozen times instead of
just once, and mapping access to each register three times (again,
instead of just once). Stop that.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Use the new mapping interfaces in the debug entry path.
SPSR and the banked registers now have smaller and faster
accessors ... use them.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Code other than main() may invoke "init". When it does so,
customized handlers may need to run ... so make sure the
command context state is updated before they do so.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Those commands presume support for the "classic" set of CPU
modes (FIQ, supervisor, IRQ, etc) ... which aren't supported
by the ARMv7-M or ARMv6-M architectures. They also presume
a "struct arm" base type, which this code doesn't use.
We haven't cleaned up the register handling enough to be able
to share any of those "base" methods.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Eliminate the monolithic tcl_target_func by registering each of its
commands using the new chained command registration mechanism.
Also chains the target's commands under the CPU command, though these
may not work properly without some further modification.
The 'target' command group was implemented using its own command
dispatching, which can be eliminated by using the new chained command
registration mechanism. This patch splits the jim_target() function
into individual handlers, which makes them to be visible to the help and
usage commands. These one-trick handlers are much easier to understand.
Splits bulk of the jtag_tap_configure into jtag_tap_configure_event,
removing three or four levels of indentation in the process.
The resulting code was stylistically improved in other ways, but it
should be functionally identical.
Moves the tertiary jim handlers and required static helpers to the top
of tcl.c, defining them in a new registration array that is chained in
both the top-level context and under the jtag command. The top-level
commands can be removed at some point in the future to reduce clutter.
Explodes the 'jtag' into separate command handlers, which are easier
to understand and extend. Makes the code much easier to understand,
though further simplifications are possible. This patch tries to
minimize the noise when viewed with 'git diff -w'.
Gives these commands improved built-in help and usage information.
Two 'rm' commands were implemented and registered. This removes the
version that would have never been called prior to refactoring the
command registration.
Adds checks for memory allocation failures. Started to use calloc()
instead of malloc()/memset(), but I got carried away. This kind of work
should be done throughout the tree, but it's almost hopeless at present.
Splits the check for a command's ability to run into a helper.
This also fixes a bug whereby commands that specified COMMAND_EXEC
were allowed to run during the configuration stage. This allowed
problematic commands to be called before 'init', defeating the intention
of specifying that command mode. With this change, the run_command()
helper denies access to handlers that should run only after 'init'
during the configuration stage.
Presently, commands registration taks a static handler data pointer.
This patch adds support for commands that require a dynamic pointer,
such as those registered in a dynamic context (e.g. subcommands for a
user-created 'foo.cpu' command). The command_set_handler_data will
update a command (group) to use a new context pointer, while the
CMD_DATA macro allows command handlers to access the value.
Jim handlers should find this value in interp->cmdPrivData.
Updates command registration to provide top-level handlers for all
commands, rather than falling back onto the 'unknown' command. Instead,
that same handler is registered for placeholders, providing the same
functionality under the root verb command name instead. This permits
users to implement their own 'unknown' function, and it resolves some
mind-bending breakage related to function object lookup while recursing.
Changes 'ocd_bounce' to call 'ocd_command' and 'ocd_help' from the
wrapper directly, rather than bouncing through their wrappers. This
prevents endless recursion caused by the above changes, whereby the
'command' wrapper's type check would blow the stack to hell and gone.
Adds 'ocd_bouncer' in startup.tcl that is called as a helper for
all command handlers, shrinking the embedded C wrapper to a mere stub.
Jim handlers are called directly, simple handlers get called with the
wrapper to capture and discard their output on error, and placeholders
call help directly (though the unknown handler still does this too).
It attempts to improve the quality of the error messages as well.
Adds the 'command' group handler, with the 'type' command producing
a string that tells whether the given command is 'native' (for Jim-based
command handlers), 'simple' (for simple built-in commands), 'group'
for command group placeholders, and 'unknown' if not found in the
command registration tables (e.g. core built-ins functions).
There is no DEBUG() macro; don't call one! Always at
least *parse* debug code, to help prevent such errors.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
In target_type.h it's documented that the target must be
halted for add_breakpoint() ... and with slight ambiguity,
also for its add_watchpoint() sibling. So rather than
verifying that constraint in the CPU drivers, do it in the
target_add_{break,watch}point() routines.
Add minor paranoia on the remove_*point() paths too: save
the return value, and print it out in in the LOG_DEBUG message
in case it's nonzero.
Note that with some current cores, like all ARMv7 ones I've
looked at, there's no technical issue preventing watchpoint or
breakpoint add/remove operations on active cores. This model
seems deeply wired into OpenOCD though.
ALSO: the ARM targets were fairly "good" about enforcing that
constraint themselves. The MIPS ones were relied on other code
to catch such stuff, but it's not clear such code existed ...
keep an eye out for new issues on MIPS.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Use the new "reset-assert" event; else SRST; else fail.
Tested on an OMAP3, using the event.
NOTE: still doesn't handle "reset halt". For some reason
neither VCR nor PRCR seemed effective; they held the value
that was written, but VCR didn't trigger debug entry when
the reset vector fired (maybe the vector needs configuring?)
and PRCR refused to hold the chip in reset until deassert()
could force the core into debug state.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This defines a "reset-assert" event and a supporting utility
routine, and documents both how targets should implement it
and how config scripts should use it. Core-specific updates
are needed to make this work.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
When writing to a chip's "reset yourself" register, the ARM11 code
was reporting a spurious failure. Just don't bother checking for
correctly incremented pointers given single-unit writes ... it's
a bit faster that way too. (Reads should likely do the same thing.
For that matter, such checks are usually just a waste...)
Shrink an overlong parameter name, and associated lines'o'code.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The command refactoring caused subcommand handlers to produce duplicate
output when run. The problem was introduced by failing to ensure all
such invocations went through a top-level "catcher" script, prefixing
the command name with the 'ocd_' prefix and consuming its results.
The fix is to ensure such a top-level "catcher" script gets created
for each top-level command, regardless of whether it has a handler.
Indeed, this patch removes all command registrations for sub-commands,
which would not have worked in the new registration scheme anyway.
For now, dispatch of subcommands continues to be handled by the new
'unknown' command handler, which gets fixed here to strip the 'ocd_'
prefix if searching for the top-level command name fails initially.
Some Jim commands may be registered with this prefix, and that situation
seems to require the current fallback approach. Otherwise, that prefix
could be stripped unconditionally and the logic made a little simpler.
The same problem must be handled by the 'help' command handler too,
so its lookup process works as intended.
Overall, the command dispatching remains more complicated than desired,
but this patch fixes the immediate regressions.
Move device argument parsing after check for number of arguments;
otherwise, calling this command without any arguments would access
argv[0] before checking whether it even existed.
Fixed the header file to properly specify the doxygen documentation for the
items defined in it.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This updates the functions in the file to all have doxygen comments
describing what they do.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Created a function for copying code to the working area on
a target. The NAND write and read functions are updated to
include use of this function.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Implementation of the NAND read function for ARM NAND I/O that
includes running a local algorithm on a device to increase the
performance of block reads.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Just make these fail, instead of letting them write over
potentially random memory. Users should be able to work
around the lack of real implementations by disbling the
MMU by hand ... until someone provides a Real Fix.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Command upgrading introduced two off-by-one bugs in the flash commands.
This patch fixes the 'flash {protect,erase_sector}' commands to check
that they have been passed the correct number of arguments.
Ammended during commit to fix help text for 'erase_address' too.
Several of the sites now using target_type_name() really
ought to be using an instance-specific name. Create a
function called target_name(), accessing the instance's
own (command) name.
Use it in several places that really should be displaying
instance-specific names. Also in several places which
were already doing so, but which had no wrapper to call.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
There are two names that may matter on a per-target basis.
One is a per-instance name (for example, "at91sam7s.cpu").
The other is the name of its type (for example, "arm7tdmi"),
which is shared among multiple targets.
Currently target_get_name() returns the type name, which is
misleading and is rarely appropriate for target diagnostics.
Rename that as target_type_name().
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Removes redundant assignment of start_ms from log_register_commands().
Eliminates command_context parameter and return value.
Adds Doxygen comment block for this API call.
Alliteration aside, this should provide the final piece of the puzzle
for developers that want to get started writing a new target type.
In this way, it also seeks to complement the 'dummy' interface driver
and 'faux' NOR flash driver.
Removes hello and foo commands from top-level registration. Instead,
the dummy interface driver and faux flash driver have been augmented
to register these commands as sub-commands.
Factors log capture while running script commands, eliminating
duplicated code between script_command and jim_capture. Factors
setting a command's Jim "retval" into a new helper as well.
Using these new helpers in the new unknown command handler's
fixes possible regressions caused by these bits being missing.
The add_usage_text command uses the same C handler, which was updated
to support its new polymorphic role. This patch updates the two script
commands that needed this support: 'find' and 'script'.
Updates httpd_start() to use register_commands() for 'readform' and
'writeform' commands. Adds server/httpd.h to export the new signatures
for this function (and httpd_stop), which allows removing the obsoleted
declarations inside openocd.c.
Adding jim_handler field to command_registration allows removing the
register_jim helper. All command registrations now go through the
register_command{,s}() functions.
Converts callback to an array of command_registration records.
Moves oocd_trace driver definition to end of file to eliminate
useless forward declaration.
Uses chaining of command_registration structures to eliminate all
target_type register_callback routines. Exports the command_handler
registration arrays for those target types that are used by others.
Changes the jtag_interface->register_callbacks field to a list of
commands to be registered. Changes callback to invocation of
register_commands() with that command registration list. Removes all
JTAG interface driver register_command callback functions, which the
previous commits had converted into identical calls.
Use register_commands() with command registration array.
---
This module was broken by previous changes, but no one has complained.
Are there still users for this modules?
Use the new command registration chaining capabilities to eliminate
the foo_register_commands helper, folding its remaining command
handler setup into the hello_command_handlers registration array.
Adds the ability to chain registration structures. Modules can define a
command with the 'chain' and 'num_chain' fields defined in their
registration table, and the register_commands() function will initialize
these commands. If the registration record creates a new command, then
the chained commands are created under it; otherwise, they are created
in the same context as the other commands (i.e. the parent argument).
Use register_commands() to register low-level command handlers,
adding a builtin_command_handlers declaration that is easy to understand.
Splits help and usage information into their appropriate fields.
Adds the usage command, to display usage information for commands.
The output for this command will remain erronenously empty until
commands are updated to use these new coventions.
The register_commands API takes multiple commands in one call, allowing
modules to declare and pass a much simpler (and more explicit) array of
command_registration records.
Add a structure to encapsulate command registration information, rather
than passing them all as parameters. Enables further API changes that
require additional required or optional parameters.
Updates the register_command API and COMMAND_REGISTER macro to use it,
along with their documentation.
Provides a migration path for the widely used register_command API,
which needs to be updated to provide new functionality.
This macro allows the API to change without having to update all of its
callers at the same time.
There was a lot of needless handshaking overhead in the current
Cortex-A8 DCC/ITR operations, since the status read by each step
was discarded rather than letting the next step know it.
This shrinks the handshaking by: (a) passing status along from
previous steps, avoiding re-fetching; which enables the big win
(b) relying on a useful invariant: that the DSCR_INSTR_COMP bit
is set after every call to a DPM method.
A "reg sp_usr" call previously took 17 flushes; now it takes just 9.
This visibly speeds common operations like entry to debug state and
stepping, as well as "arm reg" and so on.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This replaces two versions of register access functions. One
was commented out, and seemed to have uncertain intent. The
other was fairly new, and helped motivate the DPM framework
once I observed that the ARM11 was doing the very same ops.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This implements the DPM interface for Cortex-A8 cores. It
also adds a synchronization operation to the DPM framework,
which is needed by the Cortex-A8 after CPSR writes.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Make various functions static, add some comments, report
vector catch as a flavor of DBG_REASON_BREAKPOINT, get
rid of needless/undesirable ARMV4_5_CORE_REG_MODE, etc.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The previous implementation was unnecessarily complex. Get rid of the loops,
let vsnprintf() tell us directly how much storage we need and allocate that. A
second pass writes the actual string. Also add a va_end() that was missing.
This should be much faster for large strings and less wasteful for small ones.
A quirk that has been retained is that some callers patch in a newline at the
end of the returned string and depend on alloc_vprintf to allocate at least
one byte extra.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: Zachary T Welch <zw@superlucidity.net>
Rewrite rlink_init routine to use jtag_usb_open helper. Eliminates
some spurious calls to exit().
Wraps a tremendously long line of comment to fit 80 columns too.
Begins to consolidate code used by several USB JTAG interfaces.
This first patch provides the required build system changes and
a common jtag_usb_open routine, which will replace the guts for
probing the busses and devices for possible VID/PID matches.
The following patches convert each driver to use it.
This finishes the basic switchover to the new register code,
for everything except the debug registers. (And maybe we
shouldn't have a cache for *those* which works this way...)
The context save/restore code now uses the new code, but
it's in a slightly different sequence. That should be fine
since the R0/PC/CPSR stuff is all that really matters (and
if we can update those, we can update the rest).
Now there's no longer a way any code can be confused about
which copy of "r1" (etc) to use.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
As with single stepping, the previous stuff was needed because
the ARM11 code wasn't using the standard ARM base type and
register access ... but now those mechanisms work, so we can
switch out that special-purpose glue, in favor of the more
thoroughly tested/capable "standard" code.
Fixes a bug in the resume() implementation: it wasn't handling
two of its arguments correctly, preventing the "flash erase_check"
algorithm from working. (This code needs a *subsequent* update
for correct register handling, though... removing the confusion
about which "r2", for example, to use.)
This should resolve some "FIXME" comments too, for Thumb and
processor mode support. It also gets rid of a nasty exit()
call; servers should only have *clean* shutdown paths.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The previous stuff was needed because the ARM11 code wasn't using
the standard ARM base type and register access ... but now those
mechanisms work, so we can switch out that special-purpose glue.
This should resolve all the "FIXME -- handle Thumb single stepping"
comments too, and properly handle the processor's mode. (Modulo
the issue that this code doesn't yet handle two-byte breakpoints.)
Clarify the comments about the the hardware single stepping. When
we eventually share breakpoint code with Cortex-A8, we can just make
that be the default on cores which support it. We may still want an
override command, not just to facilitate testing but to cope with
"instruction address mismatch" not quite being true single-step.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This provides "standard" ARM register support -- with twenty or
more shadow registers on top of what this code now handles, but
properly associated with the various core modes -- parallel to
the current register code. That is, the current code is stilil
managing the "current" registers; the new code shadows them.
You can see all the registers with "arm reg", modify the shadows
like "r8_fiq" or "sp_abt" with "reg", and see them get properly
written back when you step. (Just don't do that with any of the
registers managed by the "old" code ...)
It also switches to using more standard code, relying on those
standard registers, in two places: (a) the poll status display,
which now shows core state (ARM/Thumb/...) and mode (Supervisor,
IRQ, etc); and (b) GDB register access.
So it's not a full migration, there are warts -- every place that
touches the old register cache is a potential bug -- but it's a
small more-or-less-comprehensible step that's even somewhat useful.
Later patches complete the migration.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This was a private mechanism to snapshot registers before leaving
debug state, and then on reentry to optionally display what changed.
It was coupled to the private register cache, which won't be sticking
around in that form for much longer. Remove (instead of teaching
it how to handle *all* the registers).
(The idea is interesting, but we ought to be able to implement
this in a generic way. Ideally through Tcl scripts that can
automatically be invoked following debug entry...)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This is a very thin layer over some of the current ARM11
debug TAP utilities. The layer isn't yet hooked up.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
First version of interface for sharing code between ARMv6 and ARMv7a
debug modules ... now the architecture includes debug support. (Not
the same as for the trimmed-down v7m or v6m though!) This is a first
version of an interface that will let the ARM11 and Cortex-A8 support
share code, features, and bugfixes. Based on existing code from both
of those cores.
The ARM v7-AR architecture specification calls this commonality the
"Debug Programmer's Model (DPM)", which seemed to be an appropriate
acronym -- a TLA even! -- for use in our code. Made it so. :)
The initial scope of this just supports register access, and is geared
towards supporting top level "struct arm" mechanisms. Later, things
like breakpoint and watchpoint support should be included.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Add $HOME/.openocd as the first default script search directory, allowing
the user to override the standard scripts.
Update the user guide with information on where OpenOCD expects to find
configuration files and scripts. Also fixed some minor formatting issues.
Add entry to NEWS as well.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
For now there's no point in saving this stuff after examine()
checks it out as OK. Ditto exporting symbols that aren't
used outside of the module which defines them. In fact, those
two things needlessly complicate the code...
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Make this code look more like the rest of the OpenOCD code.
- Use calloc() directly, not NEW() ... and fix some potential
memory leaks while we're at it.
- Remove FNC_INFO ... it's a NOP that just clutters things,
and it's trivial for developers to add tracing as needed.
- Replace FNC_INFO_NOTIMPLEMENTED with LOG_WARNING calls;
ditto. And stop having those call sites wrongly succeed!
- Waste less space with the CHECK_RETVAL() macro.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This will allow data to be allocated in read only
memory instead of on the stack. Speeds things up
and reduces stack usage.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
buf_set_u32() operated on an uninitialized stack
variable with non-byte boundaries, which led to
warnings about reading uninitialized stack.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Start using the arm_reg_current() call. This shrinks and speeds
the affected code. It can also prevent some coredumps coming from
invalid CPSR values ... the ARMV4_5_CORE_REG_MODE() macro returns
bogus registers if e.g. "Secure Monitor" mode isn't supported by
the current CPU.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
We don't need to use size_t in these places; so it's easy
to be rid of the need for this #ifdef and its MS-derived
portability problems.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
With -O3 when inlining aggressively the total stack usage will
be the sum of many fn's, which can easily get out of hand.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Have arm_set_cpsr() handle the two core state flags, updating
the CPU state. This eliminates code in various debug_entry()
paths, and marginally improves handling of the J bit.
Catch and comment a few holes in the handling of the J bit on
ARM926ejs cores ... it's unlikely our users will care about
Jazelle mode, but we can at least warn of Impending Doom. If
anyone does use it, these breadcrumbs may help them to find
the right path through the code.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Define arm_reg_current() ... returning handle to a given register,
and encapsulating the current mode's register shadowing. It's got
one current use, for reporting the current register set to GDB.
This will let later patches clean up much ARMV4_5_CORE_REG_MODE()
nastiness, saving a bit of code.
Define and use arm_set_cpsr() ... initially it updates the cached
CPSR and sets up state used by arm_reg_current(), plus any SPSR
handle. (Later: can also set up for T and J bits.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Stash a pointer to the CPSR in the "struct arm", to help get rid
of the (common) references to its index in the register cache.
This removes almost all references to CPSR offsets outside of the
toplevel ARM code ... except a pair related to the current ARM11
"simulator" logic (which should be removable soonish).
This is a net minor code shrink of a few hundred bytes of object
code, and also makes the code more readable.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Minor cleanup of ARM11 register handling: remove disabled
register hooks. This should all be handled by shared code,
and this stuff is just clutter.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Add this to ease debugging why the standard scripts aren't
found on the default script search path in some build/install
enviroments. Especially on Windows it's not straight forward
where openocd actually looks for the scripts.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Implementations need to access the register struct they modify;
make it easier and less error-prone to identify the instance.
(This removes over 10% of the ARMV4_5_CORE_REG_MODE nastiness...)
Plus some minor fixes noted when making these updates: ARM7/ARM9
accessor methods should be static; don't leave CPSR wrongly marked
"dirty"; note significant XScale omissions in register handling;
and have armv4_5_build_reg_cache() record its result.
Rename "struct armv4_5_core_reg" as "struct arm_reg"; it's used
for more than those older architecture generations.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Remove two commands that were documented as "debug commands"
and where "you probably don't want to use this". We never
intended to support them, and at least one problem report
boiled down to using this when it shouldn't have been used.
Update the docs on the existing register commands to talk a
bit more about register access and cache behavior. (Those
debug commands existed largely to *bypass* the cache.) And
fix some minor doc goofs that snuck in with recent changes,
renaming "armv4_5" as "arm" and "arm9tdmi" as "arm9".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Rewrite means for scripts to register help text for commands. These
cause the new commands to be stored in the command heirarchy, with
built-in commands; however, they will never be invoked there because
they do not receive a command handler. The same trick is used for
the Jim commands.
Remove the old helpers that were used to register commands.
For the startup.tcl code to use built-in commands, the context must be
associated with the interpreter temporarily. This will be required to
add help text.
Rewrites 'help' command in C, using new 'cmd_help' for display. Adds the
built-in 'help' COMMAND_HANDLER to provide better output than the
TCL-based script command (e.g. heirarchical listing of commands).
The help string is stored in the command structure, though it conitnues
to be pushed into the Jim environment. The current idiomatic usage
suggests the addition of a usage field as well, to provide two levels
of detail for users to consume (i.e. terse usage list, or verbose help).
Creates a helper function, cmd_help, which displays the help string
for a single command. Presently, it is called from the loop in help.
The routine has been extended to allow indentation of command groups,
so an improved help command can improve the display of information.
Refactors the command registration to use helpers to simplify the code.
The unregistration routines were made more flexible by allowing them
to operate on a single command, such that one can remove all of a
commands children in one step (perhaps before adding back a 'config'
subcommand that allows getting the others back). Eliminates a bit
of duplicated code and adds full API documentation for these routines.
The previous version never wrote dirty registers
for non-current CPU modes ... fix that.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
We *should* be able to read and write registers in any core mode,
instead of being stuck with whatever mode the core was when we
entered debug state. This patch makes them work.
Note that the current restore_context() only handles the current
mode; writing to other-mode registers is a NOP without a followup
patch fixing that. Also, that SPSR access needed some bugfixes;
it was confused with CPSR.
Secure monitor mode also seems dubious; there's probably more to
be done before that's sufficiently understood by the debugger.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Create a generic register_cache_invalidate(), and use it to
replace three all-but-identical core-specific routines:
- armv4_5_invalidate_core_regs()
- armv7m_invalidate_core_regs
- mips32_invalidate_core_regs() too.
Make cache->num_regs be unsigned, avoiding various errors.
Net code shrink and simplification.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Move bulk of for-loop to a new static command helper function.
Adds handle_nand_list_drivers command handler, registered as
'nand drivers'.
Improves command help text and error reporting.
Move variables to point of first use, reducing their scope.
Add driver_name temporary to help arguments be changed later.
Eliminates the useless 'found' variable, changing the code to terminate
the loop immediate and return its success.
After adding support for referencing banks by name, renames
the COMMAND_HELPERs appropriately:
flash_command_get_bank_by_num -> flash_command_get_bank
nand_command_get_device_by_num -> flash_command_get_device
Add get_flash_bank_by_name (and get_nand_device_by_name) helpers
to retrieves struct flash_bank * (struct nand_device *) given a
driver name and an (optional) driver-specific bank index.
These are used to extend flash_command_get_bank_by_num (and
nand_command_get_device_by_num) to allow all flash (nand) commands to
reference defined banks by name, not just by number.
To avoid some code duplication, add the flash/common.[ch] files to hold
functionality common to both types driver. The first two methods are
helpers for the above routines to find a bank specified by a "name" or
"name.index" string. get_flash_name_index() finds the '.index' portion,
while flash_driver_name_matches() performs the string portion matching.
Just pre-allocate memory for the cached register value.
Shrinks heap overhead; increases locality-of-reference.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Combine register names with other per-register data into a
single template structure. This saves space, and makes it
easier to change how registers get handled (by shrinking
the number of places that care about cache indices).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The examine() method has some conceptual breakage. Cope
with it by manually splitting out the run-once parts from
the after-each-reset parts ... this gets rid of memory
leaks and speeds up resets after the first one.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
We don't want an ARMv7-specific core state enumeration just to
add ThumbEE state. Update the generic stuff to handle that,
and replace the V7-specific bits with it.
For Cortex-A8: on debug entry, check both the T and J bits
instead of just the T bit. When the J bit is set, set the
right state and warn appropriately.
(And while we're at it, move the generic arm struct to the front
of the v7a structure, for somewhat better code generation.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The only way ARMv7-A modes differ from ARMv4/ARMv5 flavors
is that v7-A is allowed to include "Secure monitor" support.
That's now handled by our standard top-level ARM code ... so
phase out the stuff that's specific to ARMv7-A.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Removing the fast command eliminates the fast_and_dangerous global,
which was used only by arm7_9_common as an initializer. The command
is not called in the tree; instead, more explicit commands are used.
The jim_global_long function was not used anywhere in the tree.
Adds the foo/bar commands to provide more working examples of command
argument parsing, including the new handle_command_parse_bool helper.
Updates hello command help text to provide useful information.
This patch changes the behavior of all boolean parsing callers to
accept any one of "true/enable/on/yes/1" or "false/disable/off/no/0".
Since one particular pair will be most appropriate in any given
situation, the specific macros should continue to be used in
order to display the most informative error messages possible.
Rewrite arm11_handle_bool to provide a generic on/off command helper.
Refactors COMMAND_PARSE_BOOL to use new command_parse_bool helper,
which gets reused by the new command_parse_bool_any helper.
This later helper is called by the new command helper function to
accepts any on/off, enable/disable, true/false, yes/no, or 0/1 parameter.
Updates all command parsing of simple "enable" and "disable" arguments.
A few case in the tree use a tri-state or extended arguments, which
cannot use this simple macro.
Simlifies the xscale icache/dcache command handler logic.
Adds several macros similar to COMMAND_PARSE_NUMBER, but for parsing
boolean command arguments. Two flavors are provided to provide
drop-in compatibility with existing code, allow for the elimination
of a lot of code bloat while improving the error checking and reporting.
COMMAND_PARSE_ON_OFF parses "on"/"off" command parameters.
COMMAND_PARSE_ENABLE parses "enable"/"disable" command parameters.
Both print the error and return an error out of the calling function.
Change the layout to show the "Secure Monitor" registers too,
when they're present.
Instead of lining registers for each of six (or seven) modes up
in adjacent vertical columns, display each mode's registers (or
shadows) in a single block, avoiding duplicate value displays.
This also lets us shrink the line length to fits in standard 80
character lines ... six or seven 18-character columns can't fit.
Relabel "r13" as "sp", so it's more meaningful.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
When we read the CPSR on debug entry, update the CPSR cache in all
cases, not just when the current processor state is User or System.
Plus minor cleanup of how the (too-many) other registers' cache
entries get updated.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
If the core doesn't provide an optimized version of this
method, provide one without core-specific optimizations.
Use this to make Cortex-A8 support the "arm reg" command.
Related: make the two register access methods properly static,
have the "set" log a "not halted" error too, and make sure
that the "valid" flag is set on successful reads.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
ARMv7-A doesn't need to duplicate all the standard ARM code
for register handling.
- Switch Cortex-A8 to use the standard register code
- Remove duplicated infrastructure from ARMv7-A
- Have ARMv7-A arch_state() show CPSR, like other ARMs
Add comments to show where the Cortex-A8 isn't actually doing
the right thing for register reads/writes, unless core happens
to be in the right mode to start with. (Looks like maybe there
may be generic confusion between saved/current PSR values in all
the ARM code ...)
Make related ARMv7-A and Cortex-A8 symbols properly static.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Teach the "armv4_5" register code to understand about the
secure monitor mode:
- Add the other three shadowed registers to the arrays
- Support another internal mode number (sigh) in mappings
- Catch malloc/calloc failures building that register cache
This should kick in for Cortex-A8 and ARM1176.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
It's used to flag cores with the "TrustZone" extension,
and is used in subsequent patches to set up support for
the registers shadowed by its new secure monitor mode.
The ARM1176 and Cortex-A8 both support this new mode.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The previous changes to move the startup TCL code resulted in segfaults
during startup. This seemingly innocuous patch fixes the problem.
I would explain why changing from 'foo[]' to '*foo' caused this issue,
but the difference seems superficial. For now, this hot fix will do,
but this issue might bear further scrutiny.
Moves definitions for each layer into their own file, eliminating
layering violations in the built-in TCL code. Updates src/Makefile.am
rules to include all files in the final startup.tcl input file, and
others Makefile.am rules to distribute the new files in our packages.
The recent migration broke them, the fixes broken them in a new way,
but this should restore them to working order. Eliminates the
temporary variable, as the CMD_NAME macro can once again be use
in routines that increment CMD_ARGV without nasty side-effects.
Also, this is on the path to increasing the word size for
bit vectors from 8 to something wider(32? natural host machine
width?)
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Add a new is_arm_mode() predicate, and use it to replace almost
all calls to current armv4_5_mode_to_number().
Eventually those internal mode numbers should vanish... along
with their siblings in the armv7a.c file.
Remove a handful of superfluous checks ... e.g. the mode number
was just initialized, or (debug entry methods) already validated.
Move one of the macros using internal mode numbers into the only
file which uses that macro. Make the tables manipulated with
those numbers be read-only and, where possible, static so they're
not confused with part of the generic ARM interface.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Add and use arm_mode_name() to map from PSR bits to user
meaningful names. It uses a new table which, later, can
be used to hold other mode-coupled data.
Add definitions for the "Secure Monitor" mode, as seen on
some ARM11 cores (like ARM1176) and on Cortex-A8. The
previous mode name scheme didn't understand that mode.
Remove the old mechanism ... there were two copies, caused
by Cortex-A8 needing to add "Secure Monitor" mode support.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
All ARM cores need to provide obsolete FPA registers in their
GDB register dumps. (Even though cores with floating point
support now generally use some version of VFP...)
Clean up that support a bit by sharing the same dummy registers,
and removing the duplicate copies. Eventually we shouldn't need
to export those dummies.
(This makes the ARMv7-M support include the armv4_5 header, and
cleans up related #includes, but doesn't yet use anything from
there except those dummies.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Adds the command_invocation structure to encapsulate parameters for
all COMMAND_HANDLER routines. Rather than passing several arguments
to each successive subroutine, a single pointer may be passed around.
Changes the CMD_* macros to reference the new fields.
Updates run_command to create an instance and pass it to the handler.
Add additional macros to allow command handling to be migrated easily:
CMD_CTX, CMD_ARGC, and CMD_ARGV. Updates CMD_NAME to use CMD_ARGV.
In addition to making the remaining patches of this series cleaner,
this introduces easily sed-able symbols that could allow us to retire
these once the command handler infrastructure matures (i.e. pre-1.0).
No need to indirect from registered integers to pointers.
Just stash the pointers directly in the register struct,
and don't even bother registering.
This is a small code shrink, speeds register access just
a smidgeon, and gets rid of another rude exit() path.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The code is now much more explicit. It flushes every
N writes. For now flush every time, but tinkering with
the bridge FIFO size and how often we flush clearly
points in the direction of the Avalon write FIFO full
being the culprit.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Shifting by more than 32 is undefined for 32 bit integers according
to the C standard. Robust solution is conditional code.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
And move the rest of the vector_catch stuff into the C file;
it's not part of the module interface.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Also, switch integrity check over to the correct magic number,
and remove duplicate v4/v5 #define.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Have ARM11 register the "standard" ARM commands. For now, only
disassembly really works.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Rename the "armv4_5" command prefix to straight "arm" so it makes
more sense for newer cores. Add a simple compatibility script.
Make sure all the commands give the same "not an ARM" diagnostic
message (and fail properly) when called against non-ARM targets.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Fix bug noted by Øyvind: terminate the IR length autoscan when
the IR is too long, or otherwise broken.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Use size_t instead of uint32_t when specifying file sizes. Update all
consumers up through the layers to use size_t when required. These
changes should be safe, but the higher-levels will need to be updated
further to receive the intended benefits (i.e. large file support).
Add error checking for fileio_read and file_write. Previously, all
errors were being silently ignored, so this change might cause some
problems for some people in some cases. However, it gives us the chance
to handle any errors that do occur at higher-levels, rather than burying
our heads in the sand.
Uses unsigned type to pass line numbers.
Use uint64_t to pass sleep routines their milliseconds. Updates sleep
routines to use this type and improve whitespace.
Tweak "standard" ARM disassembler diagnostics to fail if the target
is not "an ARM" (vs. not "an ARMV4/5"), so it makes more sense for
cores inheriting this as the "generic" disassembler.
Also, to use the Thumb2 entry instead of the original Thumb entry.
This makes it work better for both newer cores (which support those
added instructions) and for BL and BLX instructions on older cores.
(Those instructions are 32-bits, which requires curious state-aware
code to go through a 16-bit decode interface...)
Plus minor cleanups, notably to have fewer exit paths and to make
sure they all return failure codes.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
They're really too big to inline, at least for code that's
not in any performance-critical loops.
Also move the associated string table to the rodata section.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The "improve inline binarybuffer helpers" mis-handled bytes
with the high bit set; treat them as unsigned, not signed.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Don't include it in more headers than necessary; just
use it in the few files that actually need it.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The ARRAY_SIZE macro was defined in several target files, so move it
to types.h.
This patch also removes two other identical macros: DIM (from jtag.h)
and asizeof (from arm11.h).
Eliminate redundant check that gets covered by using unsigned type.
Created to eliminate noise from subsequent patches, but this kind of
conversion will be beneficial in similar ways throughout the tree.
The container_of macro is useful as a general solution. It belongs
in types.h, rather than target.h where it was introduced. Requires
the offsetof macro, which comes from <stddef.h> (moved as well).
Antonio Borneo
Øyvind Harboe
Freddie Chopin
David Brownell
Piotr Esden-Tempski
Catalin Patulea
Dean Glazeski
mkdorg@users.sourceforge.net
Eric Wetzel
Zachary T Welch
Spencer Oliver
Rafael Campos Las Heras
Mathias Kuester
Nicolas Pitre
Marek Vasut
lementec fabien
Uwe Hermann
Andreas Fritiofson
Jerry Ling