* area should be 1 for all LUTs
* clean up macros
* add log_assert to fail noisily when encountering oddly configured DFF
* clean help msg
* flatten set to true by default
* update
* merge mult tests
* remove redundant test
* move all dsp tests to single file and remove redundant tests
* update ram tests
* add more dff tests
* fix c++20 compile errors
* add option to dump verilog
* default to use abc9
* remove -abc9 option since its the default now
---------
Co-authored-by: tony <minchunlin@gmail.com>
This commit is part of a PR that requires corresponding changes in SBY.
To prevent CI failures, detect whether those changes already landed and
skip the SBY using tests until then.
This is an alternative to setting the dont_use property in lib. This brings
dfflibmap in parity with the abc pass for dont_use.
Signed-off-by: Austin Rovinski <rovinski@nyu.edu>
See the test case. PROC_ROM will consider this for evaluation, even
though -- without any actions -- lhs is empty (but still "uniform").
A zero-width memory is constructed, which later fails check with:
ERROR: Assert `width != 0' failed in kernel/mem.cc:518.
Ensure we don't proceed if there's nothing to encode.
Fixes a bug in the handling of the recently introduced $check cells.
Both $check and $print cells in clk2fflogic are handled by the same code
and the existing tests for that were only using $print cells. This
missed a bug where the additional A signal of $check cells that is not
present on $print cells was dropped due to a typo, rendering $check
cells non-functional.
Also updates the tests to explicitly cover both cell types such that
they would have detected the now fixed bug.
The purpose of memtest02 in tests/simple/memory.v is to test bit
select on both memory (mem1) and memory converted to registers (mem2).
After 7cfae2c52, mem1 was automatically converted to registers,
and the test no longer worked as intended. This is fixed by
adding (* nomem2reg *) to mem1.
This fixes hierarchy when used with cell libraries that were loaded with
-defer and also makes more of the hierarchy visible to the auto-top
heuristic.
Right now neither `sat` nor `sim` have support for the `$check` cell.
For formal verification it is a good idea to always run either
async2sync or clk2fflogic which will (in a future commit) lower `$check`
to `$assert`, etc.
While `sim` should eventually support `$check` directly, using
`async2sync` is ok for the current tests that use `sim`, so this commit
also runs `async2sync` before running sim on designs containing
assertions.
This compares the write_smt2 output pretty much verbatim, which contains
auto generated private names and fixes an arbitrary ordering. The tested
functionality is also covered by SBY tests which actually interpret the
write_smt2 output using an SMT solver and thus are much more robust, so
we can safely remove this test.
This is mostly useful for collecting coverage for the future `$check`
cell, where, depending on the flavor, formatting a message may not be
wanted even for a failed assertion.
The behavior of these format specifiers is highly specific to Verilog
(`$time` and `$realtime` are only defined relative to `$timescale`)
and may not fit other languages well, if at all. If they choose to use
it, it is now clear what they are opting into.
This commit also simplifies the CXXRTL code generation for these format
specifiers.
This commit achieves three roughly equally important goals:
1. To bring the rendering code in kernel/fmt.cc and in cxxrtl.h as close
together as possible, with an ideal of only having the bigint library
as the difference between the render functions.
2. To make the treatment of `$time` and `$realtime` in CXXRTL closer to
the Verilog semantics, at least in the formatting code.
3. To change the code generator so that all of the `$print`-to-`string`
conversion code is contained inside of a closure.
There are two reasons to aim for goal (3):
a. Because output redirection through definition of a global ostream
object is neither convenient nor useful for environments where
the output is consumed by other code rather than being printed on
a terminal.
b. Because it may be desirable to, in some cases, ignore the `$print`
cells that are present in the netlist based on a runtime decision.
This is doubly true for an upcoming `$check` cell implementing
assertions, since failing a `$check` would by default cause a crash.
This makes tests/verilog/dynamic_range_lhs.v pass, after ensuring that
nowrshmsk is actually tested.
Stride is extracted from indexing of two-dimensional packed arrays and
variable slices on the form dst[i*stride +: width] = src, and is used
to optimize the generated CASE block.
Also uses less confusing variable names for indexing of lhs wires.
The previous version could easily generate a large amount of padding
when the constant factor was significantly larger than the width of the
shift data input. This could lead to huge amounts of logic being
generated before then being optimized away at a huge performance and
memory cost.
Additionally and more critically, when the input width was not a
multiple of the constant factor, the input data was padded with 'x bits
to such a multiple before interspersing the 'x padding needed to align
the selectable windows to power-of-two offsets.
Such a final padding would not be correct for shifts besides $shiftx,
and the previous version did attempt to remove that final padding at the
end so that the native zero/sign/x-extension behavior of the shift cell
would be used, but since the last selectable window also got
power-of-two padding appended after the padding the code is trying to
remove got added, it did not actually fully remove it in some cases.
I changed the code to only add 'x padding between selectable windows,
leaving the last selectable window unpadded. This omits the need to add
final padding to a multiple of the constant factor in the first place.
In turn, that means the only 'x bits added are actually impossible to
select. As a side effect no padding is added when the constant factor is
equal to or larger than the width of the shift data input, also solving
the reported performance bug.
This fixes#4056
Renamed python script so that it sits next to the testbench file when alphabetically sorted.
Reverted `MAX_WIDTH` to full precision for truncation testing.
Expected values are now stored in full precision rather than truncating to the same value as the input.
i.e. 0x5a5a5a5a will truncate to 0x5a5a for write data but will remain 0x5a5a5a5a for expected read.
Adds TDP submodule to generator.
Adds shorthand expected signal to testbench (mostly to make it easier when I look at the vcd dump to figure out what I did wrong in tests).
Adds `double_sync_ram_sdp` to `common/blockram.v`, providing a test for two disjoint memories.
Refactor python blockram template to take a list of params to support the above.
Also change the smaller single TDP36K tests to also test `port_a_width` value.
Use python script to generate tests for both SDP and TDP across multiple sizes of RAM.
Adds sync_ram_sdp_(wwr|wrr) to common blockram.v for double width write and double width read respectively.
In preparation for substantial expansion of CXXRTL's runtime, this commit
reorganizes the files used by the implementation. Only minimal changes are
required in a consumer.
First, change:
-I$(yosys-config --datdir)/include
to:
-I$(yosys-config --datdir)/include/backends/cxxrtl/runtime
Second, change:
#include <backends/cxxrtl/cxxrtl.h>
to:
#include <cxxrtl/cxxrtl.h>
(and do the same for cxxrtl_vcd.h, etc.)
This expands the part-select tests with one additional module.
It specifically tests the different variants of the `peepopt`
optimizations `shiftadd` and `shiftmul`.
Not all these cases are actually transformed using `shiftadd`,
including them also checks if the correct variants are rejected.
- Add support for assignments within expressions, e.g., `x[y++] = z;` or
`x = (y *= 2) - 1;`. The logic is handled entirely within the parser
by injecting statements into the current procedural block.
- Add support for pre-increment/decrement statements, which are
behaviorally equivalent to post-increment/decrement statements.
- Fix non-standard attribute position used for post-increment/decrement
statements.
We add a new flow graph node type, PRINT_SYNC, as they don't get handled
with regular CELL_EVALs. We could probably move this grouping out of
the dump method.
Removing some signed checks and logic where we've already guaranteed the
values to be positive. Indeed, in these cases, if a negative value got
through (per my realisation in the signed fuzz harness), it would cause
an infinite loop due to flooring division.
chunlin min
Tony Min
phsauter
Marian Buschsieweke
Asherah Connor
Martin Povišer
N. Engelhardt
Emil J. Tywoniak
Lofty
George Rennie
Miodrag Milanovic
Catherine
Merry
Jannis Harder
Roland Coeurjoly
Austin Rovinski
Amelia Cuss
Dag Lem
Thomas Watson
Merry
Krystine Sherwin
Zachary Snow
andyfox-rushc
Asherah Connor
Charlotte
Charlotte