The target esirisc does not free the allocated memory resources,
causing memory leaks at OpenOCD exit.
Add esirisc_free_reg_cache() and esirisc_deinit_target() and use
them to free all the allocated resources.
Change-Id: I17b8ebff54906fa25a37f2d96c01d010a98cffbd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8094
Tested-by: jenkins
Reviewed-by: Steven Stallion <sstallion@gmail.com>
The function in question does not need to change target state. It is a
target-type-dependant function, however, IMHO, it is safe to assume that
any target type would not need to change type-independant state of a
target to figure out the arch.
Change-Id: I607cb3aee6529cd5a97bc1200a0226cf6ef43caf
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8093
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
There are quite a lot of "getters" in target interface.
They do not change target structure, nevertheless the structure is
passed to these functions via a plain pointer.
The intention is to clarify the purpouse of these functions by passing
the `target` structure as a pointer to constant data.
Change-Id: Ida4a798da94938753b86a293a308d93b091d1bf3
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8092
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This change implements the support for the ARM Debug Interface v6.
The DAP-level interface properly selects the DP Banks and AP address.
Sample ARM configuration DAP and JTAG scripts have been updated.
Change-Id: I7df87ef764bca587697c778810443649a7f46c2b
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8067
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
the socket option RCVLOWAT is not supported on CYGWIN.
implemented ifdef __CYGWIN not to set this option.
Change-Id: I9f6e81fa98ecf5261ea286deb4675658aae59b8e
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8066
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Correct GPIO Extender configuration, after reconsideration,
we need to configure the IO extender 0x23 pins as all inputs.
Add more LOG_ERRORs to the code to better track bugs.
Re-organize angie_init function
Change-Id: I1fcf4919ba9ea95576803dd35cce7dafa26853b4
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8079
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Clang static analyzer warnings
"1st function call argument is an uninitialized value"
on the first libusb_free_transfer() parameter (lines 423, 424)
could turn into a real problem in a corner case:
If allocation of a libusb transfer struct fails, the pointers of not yet
allocated transfers remain uninitialized.
Use calloc() to zero whole struct cmsis_dap_backend_data.
Fixes: fd75e9e542 (jtag/drivers/cmsis_dap_bulk: use asynchronous libusb transfer)
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I0e489757d82d10ed7416c5e8c215e1facc7f8093
Reviewed-on: https://review.openocd.org/c/openocd/+/8045
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The function is used for commands:
- jtag configure
- jtag cget
While there, add the missing .usage field.
Change-Id: I97ddc4898259ddb7fd2d057a997f33a6f4b0e2a8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8058
Tested-by: jenkins
Before this change, when we send an I2C Bulk data at the same
time while Jtag bitbanging functions execute, the microcontroller
puts JTAG bitbanging on wait and executes all I2C bitbanging
function, which causes problems like loss of Ack in DAP responses
and other errors.
With this commit, When I2C interruption occurs, it sets a variable
to true and continues JTAG bitbanging, when it finish it executes
the I2C bitbang.
Change-Id: Ia80bac21f8a259f4a1176b5346bf74ed0aa6e38b
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8074
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add GPIO extender initial configuration that is needed to configure
some important GPIOs and ensure that the dev board is ready to work.
Add i2c_write function that make a write transfer to any slave device.
Give a new Product ID to ANGIE to make it different than the non
programmed ANGIE.
Change-Id: I0a8dacb7fe218145b7d3ed1cb75f106ed6256714
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8072
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Give ANGIE a new PID after renumeration to be able to distinguish
the two cases (programmed and not programmed)
Change-Id: I30a91d8ed2e8e261221488b98d40a027ca41da52
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7991
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
remove angie_clear_queue function from executing before the
angie_execute_queued_commands function and making it at the
end of the reset function.
Change-Id: Id8a0664fbd5b8f9730545ce0f8f272ae0b0e7e78
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7990
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
We want to keep the tri-state buffers located between the FPGA
and the board, in 'Z' state until we launch an i2c connection.
We launch an i2c start condition, make the SCL
direction 'OUT' to start the i2c protocol and at the end
of the i2c connection at the stop condition, we re-make
the tri-state buffers at 'Z' state.
Change-Id: Ic597a70d0427832547f6b539864c24ce20a18c64
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7989
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Send bitstream size to firmware to initialize the GPIF count registers,
since we're going to send this size via GPIF, we need to give the exact
number of bytes to be sent, then the GPIF counter will decrement with
every clock cycle (every byte sent) until reaching zero and stops.
Change-Id: Ib4e8e0f95a6a4a95ef4888ba8a04a0ea45567f5a
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7988
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
clang build triggers an error for an uninitialized value of the
variable 'instr'.
This is a false positive, as the macro
#define MIPS32_CONFIG3_ISA_MASK (3 << MIPS32_CONFIG3_ISA_SHIFT)
guarantees the switch/case already covers all the possible values
with cases 0, 1, 2 and 3.
Silent clang by adding a useless default case to the switch.
While there, fix the indentation of the switch/case accordingly to
OpenOCD coding style.
Change-Id: I0ae316754ce7d091dd8366bf314b8e6ee780e313
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 7de4b1202d ("target/mips32: add cpu info detection")
Reviewed-on: https://review.openocd.org/c/openocd/+/8065
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Some OpenOCD command gets fragment of TCL scripts as command-line
argument, fragments that will be kept and executed later on.
E.g. the command 'configure' gets the body of an OpenOCD event:
$TARGET configure -event halted {TCL code}
These commands store the argument as a Jim_Obj and pass it to the
jimtcl interpreter when the TCL fragment has to be executed.
Using Jim_Obj as storage is relevant to let the jimtcl interpreter
to recover extra info of the TCL fragment, like the file-name and
the line-number that contain the fragment, that will be printed
out in case of run-time errors.
While converting the commands to COMMAND_HANDLER, we should avoid
storing the argument as C strings otherwise we will loose precious
info in case of run-time errors making challenging the debugging
of such TCL fragments.
Extend the struct command_invocation to contain the array that
points to the Jim_Obj of the command arguments.
This will be used while converting commands to COMMAND_HANDLER.
Change-Id: If37c5f20e9a71349f77ba1571baf1e6778e28aa5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8057
Tested-by: jenkins
The jimtcl interpreter guarantees that the Jim objects in argv[]
are not deallocated during the command execution. Thus, there is
no need to copy the string content of argv[].
Simplify exec_command() by inlining its two sub-functions and
dropping the strdup().
While there, add a LOG_ERROR() for out of memory.
Change-Id: I3e21ed7da50ca0bd072edbd49fca9740c81f95b0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8055
Tested-by: jenkins
The output parameter nwords is always equal to the input parameter
argc, when the function succeeds.
Drop the parameter nwords and let the caller use directly the
value in argc.
While there, convert some 'unsigned' to 'unsigned int'.
Change-Id: Ie3d8ce1351792f3c07fe39cdcbcd180fd24dc928
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8054
Tested-by: jenkins
In both functions script_debug() and script_command_args_alloc()
the variable len is never used, and Jim_GetString() does not
mandate it.
Drop the variable and pass NULL to Jim_GetString().
Change-Id: I754b27a59c6087cde729496be42609d2a7145b0c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8053
Tested-by: jenkins
Commit e370e06b72 ("target: Deprecate 'array2mem' and
'mem2array''") has already replaced the deprecated root versions
of commands mem2array and array2mem with TCL proc's that use
'read_memory' and 'write_memory'. It has left the deprecated code
of the target's version of the commands because the effort to code
the TCL replacement was not considered valuable.
To drop the last jim_handler commands, I consider much easier and
less error-prone to code them in TCL instead of converting the
deprecated code to COMMAND_HANDLER.
Drop the code in target.c and extend the TCL proc's.
While there, add the TCL procs to _telnet_autocomplete_skip.
Change-Id: I97d2370d8af479434ddf5af68541f90913982bc0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8052
Tested-by: jenkins
When requested by the core code (handle_breakpoints = true),
arc_resume() should be able to advance over a potential breakpoint set
at the resume address instead of getting stuck in one place. This is
achieved by removing the breakpoint, executing one instruction,
resetting the breakpoint, then proceeding forward as normal.
With this patch applied, openocd is now able to resume from a
breakpoint halt when debugging ARCv2 targets via telnet.
This has previously been committed to the Zephyr project's openocd repo
(see https://github.com/zephyrproject-rtos/openocd/pull/31).
Change-Id: I17dba0dcea311d394b303c587bc2dfaa99d67859
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Signed-off-by: Artemiy Volkov <artemiy@synopsys.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7817
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Presently, we rely on gdb to restore break/watchpoints upon resuming
execution in arc_resume(). To match this behavior in absence of gdb
(more specifically, when handle_breakpoints is true), this patch
explicitly re-enables all breakpoints and watchpoints in arc_resume().
This has previously been committed to the Zephyr project's openocd repo
(see https://github.com/zephyrproject-rtos/openocd/pull/31).
Change-Id: I59e9c91270ef0b5fd19cfc570663dc67a6022dbd
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Signed-off-by: Artemiy Volkov <artemiy@synopsys.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7816
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
For Armv8.1-M based cores, detect if the core implements the optional
M-profile vector extension (MVE), using MVFR1 register.
While at there rework armv7m->fp_feature detection based on MVFR0
and MVFR1 registers.
Change-Id: I92d5b1759aea9f7561d285f46acdec51d6efb7b4
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6950
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
By queuing multiple jtag transfers the connection speed between
JTAG-Host and JTAG-Hub is improved. This is due to much less
calls to OS functions. An improvement of about x30 has been
measured with ftdi-based jtag adapters
For this to work the JTAG-Host server needs to know if flow control
is enabled on the JTAG-Hub ports. This is possible with newer
JTAG-Hub/JtagCDC. For old JTAG-Hubs the queuing is not enabled so
this change is backwards compatible.
Change-Id: I8a5108adbe2a2c1e3d3620b5c9ff77a546bfc14e
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7978
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
On some systems (at least Windows/CYGWIN and macOS) libusb_dev_mem_alloc()
simply returns NULL. The helper can fall-back to malloc() to allocate
CMSIS-DAP pending command/response buffers.
Fixes: fd75e9e542 (jtag/drivers/cmsis_dap_bulk: use asynchronous libusb transfer)
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I89660f6747ad9d494b8192711cbbee5764e058fa
Reviewed-on: https://review.openocd.org/c/openocd/+/8044
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
On some systems (at least Windows/CYGWIN and macOS) libusb_dev_mem_alloc()
simply returns NULL.
Use the result of the very first libusb_dev_mem_alloc() call to decide
if the underlining system supports dev mem allocation or we should
fall-back to plain heap malloc().
From the decision time on, keep using the selected type of memory allocator
and deallocator.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ia1f0965cea44b4bb6d936b02ec43f5a16a46f080
Reviewed-on: https://review.openocd.org/c/openocd/+/8059
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Based on Daniel Goehring's [1] and Peter Collingbourne's [2] work.
Probe for support of 8, 16 bit and if the large data extension is available
also probe for 64, 128 and 256 bit operations.
Probe for the ability of packing 8 and 16 bit data
(formerly probed in mem_ap_init()). The probe is integrated to
mem_ap_read/write() routines and takes place just before the first memory
access of the specific size.
Add 64, 128 and 256 bit MEM-AP read/writes.
Introduce specific error codes for unsupported transfer size
and for unsupported packing.
Change-Id: I180c4ef17d2fc3189e8e2f14bafd22d857f29608
Link: 7191: target/adiv5: add MEM-AP 64-bit access support | https://review.openocd.org/c/openocd/+/7191
Link: 7436: arm_adi_v5: Support reads wider than 32 bits | https://review.openocd.org/c/openocd/+/7436
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7576
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Prevent packed writes with Nuvoton NPCX quirks because the workaround
uses all byte lanes for one byte or halfword and thus precludes packing.
Eliminate quirk code for size 4 as it is equivalent to the common code.
Make the quirk code for sizes 2 and 1 easier readable.
Change-Id: I72324e56a49b4712bd3769e03dce01427d9fcd73
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7575
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Introduce ti_be_lane_xor for byte lane correction
and use common code for both quirk and regular conversion.
The same lane correction takes place in both mem_ap_read/write()
- it was obfuscated in original code with different bitwise and arithmetic
operations.
Change-Id: I6a30672b908770323d30813a714e06ab8695fe26
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7574
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
S32K General-Purpose Microcontrollers
Scalable, low-power Arm® Cortex®-M series-based microcontrollers AEC-Q100
qualified with advanced safety and security and software support for
industrial and automotive ASIL B/D applications in body, zone control,
and electrification.
Change-Id: I4143258535437c18b81802436267bfd561de9d31
Signed-off-by: David Vidrie Leon <davidvidrie@geotab.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8012
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Update mips32 instructions, add barrier and sync related insts.
Add SYNC and barrier instruction blocks for memory access safety.
These instructions are not supported on Lexra and/or MIPSr1 CPUs,
detections were added and they will be executed conditionally.
Rework mips32_pracc_read/write_regs function.
Checkpatch-ignore: MACRO_ARG_REUSE
Change-Id: Ib14112f37ff1f060b1633df73d671a6b09bb2178
Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7865
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add detection for mips cpu types by using prid.
Add cpuinfo command for inspecting more verbose info.
Add MIPS Architecture specs in openocd docs.
Change-Id: I28573b7c51783628db986bad0e226dcc399b4fa6
Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7912
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Tested with APM32F030C8T.
Change-Id: I63cd8b66424135dae481a96ba560e6f0b1f9544e
Suggested-by: Christian U <info@cu-tec.de>
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8014
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Some bitbang interfaces have no speed regulation and work as fast as
they can. Only the sequence of execuded commands is guaranteed but
not the timing. It works most of time with one exception: when the
JTAG_SLEEP command is executed, we expect that all previous commands
already finished so that the sleep interval is guaranteed.
For now there may be situations when the sleep time has passed but
previous commands are not actually executed.
This patch adds a flush command to the bitbang interface, connects it
to the existing implementation for remote_bitbang, and runs it when
the JTAG_SLEEP command is executed.
Change-Id: If40894a63d29a260a4ded134b008df6dd1e89c46
Signed-off-by: Aleksey Shargalin <myokaski@gmail.com>
Signed-off-by: David Ryskalczyk <david.rysk@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/4284
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Some devices with an internal multi-tap JTAG router require a vendor
specific bypass instruction to bypass the master TAP when addressing
slave taps internal to the same device. On these devices the standard
bypass instruction bypasses the whole device.
Change-Id: I4506f0e67c9e4dfe39b7fa18c63d67900313e594
Signed-off-by: Henrik Nordström <henrik.nordstrom@addiva.se>
Reviewed-on: https://review.openocd.org/c/openocd/+/8041
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
swd_connect_multidrop() sent DORMANT_TO_SWD and called
swd_multidrop_select_inner(). DORMANT_TO_SWD sequence ends
with a LINE_RESET sequence.
swd_multidrop_select_inner() sent LINE_RESET sequence again.
It was useless in this case.
swd_connect_multidrop() emited JTAG_TO_DORMANT and DORMANT_TO_SWD
sequences before connecting each DAP in SWD multidrop bus.
It is sufficient to emit JTAG_TO_DORMANT and DORMANT_TO_SWD
just once and emit the shorter LINE_RESET instead for subsequent DAPs.
Introduce a global variable swd_multidrop_in_swd_state
and use it to control what sequence is emitted.
In case of reconnect after an error, always use the full switch
JTAG_TO_DORMANT and DORMANT_TO_SWD.
Change-Id: Iba21620f6a9680793208bf398960ed0eb59df3b1
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7218
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
SWD multidrop requires some initialization once before connecting
all daps. Provide an optional pre-connect dap operation.
Change-Id: I778215c512c56423a425dda80ab19a739f22f285
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7542
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The original code supported ADIv5 only, just one SELECT register
with some reserved bits - the pseudo value DP_SELECT_INVALID was
just fine to indicate the DP SELECT register is in an unknown state.
Added ADIv6 support required DP SELECT and SELECT1 registers
without reserved bits. Therefore DP_SELECT_INVALID value became
reachable as a (fortunately not really used) ADIv6 AP ADDR.
JTAG DPBANKSEL setting support introduced with ADIv6 does not
honor DP_SELECT_INVALID correctly: required select value
gets compared to DP_SELECT_INVALID value and the most common zero
bank does not trigger DP SELECT write.
DP banked registers need just to set DP SELECT. ADIv6 AP register
addressing scheme may use both DP SELECT and SELECT1. This further
complicates using a single invalid value.
Moreover the difference how the SWD line reset influences
DPBANKSEL field between ADIv5 and ADIv6 deserves better handling
than setting select cache to zero and then to DP_SELECT_INVALID
in a very specific code positions.
Introduce bool flags indicating the validity of each SELECT
register and one SWD specific for DPBANKSEL field.
Use the latter to prevent selecting DP BANK before taking
the connection out of reset by reading DPIDR.
Treat DP SELECT and SELECT1 individually in ADIv6 64-bit mode.
Update comments to reflect the difference between ADIv5 and ADIv6
in SWD line reset.
Change-Id: Ibbb0b06cb592be072571218b666566a13d8dff0e
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7541
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
For unknown reasons, the coreutils tool 'od' on MacOS outputs an
extra empty line, which appears in the new auto-generated files.
Modify the script bin2char.sh to drop every empty line.
Change-Id: Id835fecadb58ad4ddfc11ef9f9a2e8d75c5dffe9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8051
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Tested-by: jenkins
Reviewed-by: Henrik Nordström <henrik.nordstrom@addiva.se>
In loops that typically take longer time to complete, check if there is
a pending shutdown request. If so, terminate the loop.
This allows to respond to a signal requesting a shutdown during some
loops which do not return control to main OpenOCD loop.
Change-Id: Iace0b58eddde1237832d0f9333a7c7b930565674
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8032
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
If the remote_bitbang host does not execute requests immediately,
delays performed inside OpenOCD can be lost. This option allows
the delays to be sent to the remote host so that they can be
queued and executed in order.
Signed-off-by: Jeremy Herbert <jeremy.006@gmail.com>
Signed-off-by: David Ryskalczyk <david.rysk@gmail.com>
Change-Id: Ie1b09e09ea132dd528139618e4305154819cbc9e
Reviewed-on: https://review.openocd.org/c/openocd/+/7472
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
While at it, fix some coding style issues.
Change-Id: I8196045f46ce043ed0d28cb95470132b3a7de1bb
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8039
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The field backup_working_area is always used as a boolean value.
Use bool type for backup_working_area.
Change-Id: I55c68d717dbbe9e5caf60fd1db368527c6d1b995
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8036
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Currently all Atmel CMSIS-DAP interfaces are assumed to have 512 byte
reports except for the mEDBG (found on Xplained Mini boards) and the nEDBG
(found on Curiosity Nano boards). This check is far from exaustive and it
results in some Microchip programmers (like the MPLAB Snap and PICkit 4)
not working correctly with OpenOCD.
Instead of assuming that Atmel programmers have 512 byte reports unless we
know otherwise, this commit flips the logic around. Only the older "third
generation" EDBG based programmers have 512 byte report sizes, and that 64
bytes will be more common in Microchip tools going forward.
The list of PIDs for 3rd generation Microchip programmers comes from
toolinfo.py from Microchip's pyedbglib.
This commit adds a more generic "quirks" list that will allow programmers
with unusual report sizes to be added easily in the future.
Change-Id: Ic39a4bdcd67c4c93d5707657c6ee5d216bc4437a
Signed-off-by: Samuel Dewan <samdewan@me.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8033
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
These messages helps to clarify current status of examination process
Change-Id: I5d93903c4680deed2c1bf707d8f7ef0b48ffdc9a
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8013
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This functionality can be useful for;
1-ESP flashing code to load flasher stub on target and
write/read/erase flash.
2-ESP GCOV command uses some of these functions to run
onboard routines to dump coverage info.
This is high level api for the Espressif xtensa and riscv targets
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I5e618b960bb6566ee618d4ba261f51af97a7cb0e
Reviewed-on: https://review.openocd.org/c/openocd/+/7759
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Introduce 'cmsis-dap quirk' command to enable and
disable quirk mode.
If enabled, disconnect and connect before a switch
sequence and do not use multiple packets pipelining.
Change-Id: I6576f7de9f6c98a25c3cf9eec9a456a23610d00d
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7966
Tested-by: jenkins
Use it whenever an out-of-sync response is detected to clean
USB bulk transfer state.
USB hidapi does not offer any means to cancel a pending request,
therefore cmsis_dap_hid_cancel_all() does nothing.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ie36fa760c1643ae10be0e87fc633068965a72242
Reviewed-on: https://review.openocd.org/c/openocd/+/7366
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
The synchronous libusb_bulk_transfer() always waits
for the transfer to complete. Therefore it does not allow issuing
multiple USB requests as used on HID backend.
Switch to asynchrounous libusb_submit_transfer().
With this patch a good USB FS based CMSIS-DAPv2 adapter
almost doubles the throughput:
adapter speed: 20000 kHz
poll off
> load_image /run/user/1000/ram256k.bin 0x20000000
262144 bytes written at address 0x20000000
downloaded 262144 bytes in 0.428576s (597.327 KiB/s)
> dump_image /dev/null 0x20000000 0x40000
dumped 262144 bytes in 0.572875s (446.869 KiB/s)
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ic6168ea4eca4f6bd1d8ad541a07a8d70427cc509
Reviewed-on: https://review.openocd.org/c/openocd/+/7365
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
This adds new command characters to make SWD work with the new split
jtag and swd operations of bitbang.
The command characters are as follows:
O - SWDIO drive 1
o - SWDIO drive 0
c - SWDIO read request
d - SWD write 0 0
e - SWD write 0 1
f - SWD write 1 0
g - SWD write 1 1
Documentation has been updated accordingly. The new commands will be
used by an adapted version of the jtag-openocd applet of the "Glasgow
Debug Tool" (https://github.com/glasgowEmbedded/Glasgow). It has been
tested against an stm32f103 and an at91samd21 target.
contrib/remote/bitbang/remote_bitbang_sysfsgpio.c has also been adapted
to support SWD via the new command set. Some limited testing has been
done using a Raspberry Pi 2 with an stm32f103 and an at91samd21 target
attached.
Change-Id: I8e998a2cb36905142cb16e534483094cd99e8fa7
Signed-off-by: Manuel Wick <manuel@matronix.de>
Signed-off-by: David Ryskalczyk <david.rysk@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6044
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
While at it, fix the 'wp' command documentation.
Change-Id: I70f3110e8ce286051f8f810260f1857b2285e634
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8022
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
By definition in `target/target.h`, `coreid` is not a unique identifier
of a target -- it can be the same for targets on different TAPs.
Change-Id: Ifce78da55fffe28dd8b6b06ecae7d8c4e305c0a2
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7997
Tested-by: jenkins
Reviewed-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
When user requested a change on cp0 status register,
it may contain changes on EXL/ERL bits, and changes on
these bits could lead to differnt behaviours on writing
to other cp0 registers.
Change-Id: Ic83039988c29c06ee134226b52de943c46d19da2
Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7914
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Instead of returning an 'error string', throw an error. This makes it
much easier to handle errors in Tcl scripts or in tools that use Tcl RPC.
Change-Id: I75c48750cfad7430fa5e6bc88fe04ebd59d34cea
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8006
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This is useful when using the SEGGER RTT tooling, as the SEGGER RTT
tool J-Link RTT Viewer version 7.84f requires that it receives a
messages immediately after connecting. Otherwise it will give a timeout
and it will not connect.
Change-Id: I9240a1b6a93cd5c0fbd18292afb33b89013d78bf
Signed-off-by: Thiemo van Engelen <tvanengelen@victronenergy.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7752
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The correct syntax is already suggested due to the return
value used.
While at it, apply some minor code improvements.
Change-Id: I990c0f7a0871f4b1a0fcdd13afc190149302443c
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8003
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The correct syntax is already suggested due to the return
value used.
While at it, apply some minor code improvements.
Change-Id: Id32440cdd531077008abd679add32246c4249eb2
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8001
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The correct syntax is already suggested due to the return
value used.
While at it, apply some minor code improvements.
Change-Id: Idf3d7a46ddecd70823e06bc3997f41fcdb8e501f
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8000
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The correct syntax is already suggested due to the return
value used.
While at it, apply some minor code improvements.
Change-Id: I676e2ebf5714c850a436854a32c2e9d2f181d537
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7999
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The correct syntax is already suggested due to the return
value used.
Change-Id: I0f4a7f93fdf056e7517c754d6d4ecd7928f1d226
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7992
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
The correct syntax is already suggested due to the return
value used.
Change-Id: I971a579014c1eaf13b1932f7fa87c020a8eba69c
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7971
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
While at it, remove the syntax error messages as the correct
syntax is already suggested due to the return value used.
Change-Id: I9310ba96ed3f8a85c37cee9193e481ad3df02e77
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7969
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The mips opcode macro for the SRL opcode was using the wrong constant
value:
SRA -- Shift right arithmetic
Encoding: 0000 00-- ---t tttt dddd dhhh hh00 0011
SRL -- Shift right logical
Encoding: 0000 00-- ---t tttt dddd dhhh hh00 0010
This corrects the opcode constant for SRL and adds the SRA opcode for
completeness.
There is only one user of MIPS32_OP_SRL in src/flash/nor/cfi.c:
Since the mask constant (0x00000080 for the DQ7 mask) shifted in this
case would never have the sign bit set, it worked fine even though it
was accidentally using the SRA opcode instead of SRL.
Change-Id: I0a80746e2075c7df1ce35b9db00d9d0b997a3feb
Signed-off-by: Tobias Diedrich <ranma+openocd@tdiedrich.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/3613
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Use a command group 'kitprog' with subcommands instead of individual
commands with 'kitprog_' prefix.
The old command is still available to ensure backwards compatibility,
but is marked as deprecated.
Change-Id: I7f0d447939819ffc488a3d7a8de672b58887127f
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7967
Reviewed-by: Bohdan Tymkiv <bohdan200@gmail.com>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The variable 'mode' was introduced in
commit 4dc8cd201c ("cmsis-dap: add initial cmsis-dap support")
but never has been used (just cleared)
Change-Id: Ia741d181ee8006bd0d872f3358a57e045235741a
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7965
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Use a command group 'cmsis-dap' with subcommands instead of individual
commands with 'cmsis_dap_' prefix.
The old commands are still available to ensure backwards compatibility,
but are marked as deprecated.
Change-Id: I75facb7572a86354c2ce6144aa7fadf3b5a6db4e
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7963
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Bohdan Tymkiv <bohdan200@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
We were previously inadvertently clearing the top 32 bits of SCTLR_EL1
during read_memory/write_memory as a result of using 32-bit operations
to access the register and because the fields used to temporarily
store the register were 32-bit. Fix it.
Change-Id: I657d7f949e1f7ab6bf90609e3f91cae09cade31a
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7939
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Associativity=0 means that only one CMO is needed for all ways.
It could also mean that the cache is 1-way, but this is less likely.
Currently Associativity=0 causes us to hang in the while loop in
decode_cache_reg. Fix it by skipping the loop in this case. We can let
way_shift be set to the arbitrary value of 0 because in the case where
Associativity=0 we only ever shift 0 by it before ORing it into the
CMO operand.
Change-Id: I7c1de68d33f6b3ed627cbb1e2401d43185e4c1e3
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7916
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch adds target logging to breakpoint
handling code. This makes it easier to
debug multicore/multithread systems.
Change-Id: I6bea8079a457070a8f63d0ce381a4ece6f5a190a
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7922
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
If we can't remove bp/wp, we will stuck in endless loop
Change-Id: I44c0a164db1d15c0a0637d33c75087a49cf5c0f4
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7940
Tested-by: jenkins
Reviewed-by: Anatoly P <kupokupokupopo@gmail.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Break- and watchpoints are not removed when a target is destroyed
which introduces a memory leak.
Change-Id: I6143d48f7efd765b7752a12fdc337da3496d896f
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7956
Reviewed-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
In the unusual (and even incorrect) case of running the command
target create ...
before defining an adapter and the associated transport, the
command causes a segmentation fault. E.g.:
openocd -c 'target create cpu cortex-m -endian little'
Check that get_current_transport() returns a valid pointer before
referencing it.
Change-Id: I9796a7e92196ef3df5c7152b27c34102045dc9e7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7962
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
I use a script to compare the commands in the code with the ones
in the documentation.
Fix the style of the data to simplify the parsing.
Change-Id: I0f1d7e9ff5e2928312ca1a2f3424f82d2910580a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7960
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Loading a bitstream to cetrus device crashed due to
missing initialization.
Change-Id: Ibd9a04b84e514f9635af01a2b73bae478e534eb7
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7908
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This allows programmatically determining the debug reason.
Change-Id: I0c3e85cebb6dc28fc0fc212beca84a484ac654a5
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7952
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Fixes below Sparse tool warning.
warning: symbol 'breakpoint_watchpoint_remove_all' was not declared.
Should it be static?
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I4af1d5aa54abcb45f746b877513ba0b5fccbeb47
Reviewed-on: https://review.openocd.org/c/openocd/+/7955
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Marek Vrbka <marek.vrbka@codasip.com>
Enhance `mips32_read_config_regs` to better detect MIPS32 ISA,
DSP, and FPU features, allowing user to get more detailed
target information.
Most of these information will be used in MIPS m/iAptiv support.
Change-Id: I23571a626ec64fa019acac91bdbfcb434373bfc1
Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7911
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
This patch forces a read of register from the target
in the get_reg command in case the register cache
does not hold a valid value at that moment.
Note that the command "reg" already handles it
correctly, no fix is needed there.
Change-Id: I75fad25188e94ee4e06162ab6d600ea24dbf590a
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7958
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The original documents from Jedec since JEP106BG, do not report
the entry for "21 NXP (Philips)", replaced by "c".
It's clearly a typo.
Keep the line from JEP106BF.01 for "NXP (Philips)".
Change-Id: I273c8c5ecf48336ce5189b484a7236273ba90184
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7954
Tested-by: jenkins
In jtag_libusb_open I've added a parameter for delivering the device
description for which this function should search and adjusted all
callers of this function. A new driver for WCH CH347 JTAG chips
will use this new parameter.
See also: https://review.openocd.org/c/openocd/+/7937
Change-Id: I85e1d7b1f7912ba5e223f0f26323ff3b7600e17d
Signed-off-by: EasyDevKits <info@easydevkits.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7938
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add result check for mips32_pracc_read_regs in mips32_save_context.
Change-Id: Ie796d2b05a9feb11e246c2d0771b52cad4fb70db
Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7932
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This makes it easier to look at log files where multiple gdb instances
are connected.
Change-Id: Ic5aca52b32ee03ac35ffbed9a2fc552abb0a1cba
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7895
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Previously, when listing the watchpoints, OpenOCD printed
numbers 0, 1 and 2 representing READ, WRITE and ACCESS type
watchpoints.
This patch changes it to 'r', 'w' and 'a'. This increases the
clarity as what type the watchpoint actually is.
Change-Id: I9eac72dfd0bb2a9596a5b0c080a3f584556ed599
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7909
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
This patch adds the "all" option to the rwp command.
It removes all watchpoints, much like rbp all removes
all breakpoints.
Change-Id: Id58dd103085e558f17afa4a287888cf085566ca9
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7907
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Previously, if you ran a tcl command in capture like so:
"capture { reg 0x1000 hw }"
Such command did overwrite the tcl result if LOG_LVL_INFO or
lower was logged during it.
This patch changes it by prepending the log to the tcl result instead.
As the tcl results should not be lost during capture.
Change-Id: I37381b45e15c931ba2844d65c9d38f6ed2f6e4fd
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7902
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
If wp/bp is missing at address rwp/rbp won't return zero code (on smp).
Now it fixed.
Fixes: 022e438292 ("target: Change policy of removing watchpoints/breakpoints.")
Change-Id: I3a3c245f7088fc23227b286d2191fc7f3edba702
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7910
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add support for the ARM MCRR/MRRC instructions which require the use of
two registers to transfer a 64-bit co-processor registers. We are going
to use this in a subsequent patch in order to properly dump 64-bit page
table descriptors that exist on ARMv7A with VMSA extensions.
We make use of r0 and r1 to transfer 64-bit quantities to/from DCC.
Change-Id: Ic4975026c1ae4f2853795575ac7701d541248736
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Michael Chalfant <michael.chalfant@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/5228
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Currently, instruction cache is being invalidated in
arc_{un,}set_breakpoint() regardless of whether the breakpoint's type is
HW or SW. For SW breakpoints, this has no net effect as the caches are
flushed as a by-product of overwriting instructions in main memory and
is thus merely unnecessary; but for HW breakpoints this invalidation is
not preceded by a flush and might lead to loss of data. This patch
removes the invalidate() call altogether to correct this undesired
behavior for HW breakpoints.
With this patch applied, all supported HW breakpoint tests from the gdb
testsuite are now passing with the arc-openocd backend.
Change-Id: I3d252b97f01f1a1e2bf0eb8fb257bdab0c544bc2
Signed-off-by: Artemiy Volkov <artemiy@synopsys.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7767
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The comment above armv8_dpm_read_current_registers() doesn't match
the implementation, as the function reads all the registers from
ARMV8_PC and above.
The registers currently read are not relevant to answer to the
usual GDB initial request through the 'g' packet. Plus the lack of
differentiation per core state (AArch32 vs AArch64) causes the
read of not existing registers in AArch32 triggering errors, as
tentatively fixed by https://review.openocd.org/5517/
Fix the code to read the registers initially required by GDB.
Modify the comment to report the register list in AArch32 and in
AArch64.
Keep the extra checks inside the read loop, even if they are
mostly irrelevant; this could prevent errors if someone needs to
extend the number of registers to read.
The current implementation of the register's description in
OpenOCD does not allow to discriminate among AArch32 and AArch64
registers. Add a TODO comment to highlight it.
Change-Id: Icd47d93c19a9e1694a7b51bbc5ca7e21a578df41
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7887
Tested-by: jenkins
The secure microcontroller Infineon SLx2 uses a custom Cortex-M33.
The register CPUID reports value 0x490FDB00.
Reference link to the product:
Link: https://www.infineon.com/cms/en/about-infineon/press/market-news/2022/INFCSS202211-034.html
Change-Id: I8911712c55bd50e24ed53cf49958352f470027a5
Signed-off-by: Ahmed Boughanmi <boughanmi.external@infineon.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7879
Reviewed-by: Karl Palsson <karlp@tweak.au>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This patch adds error reporting when unknown image type is specified.
Previously, OpenOCD replied with an empty string.
Change-Id: I16220b1f5deb3b966a21731f0adf7911a78e8959
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7883
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Previously, the bcm2835_peri_base value would be printed as a decimal
value despite having a "0x" prefix, implying it should be a hex value.
BCM2835 GPIO: peripheral_base = 0x1056964608
Now, the value is correctly converted to hexidecimal.
BCM2835 GPIO: peripheral_base = 0x3F000000
Change-Id: Id59185423917e6350f99ef68320e2102a3192291
Fixes: b41b368255 ("jtag/drivers/bcm2835gpio: extend peripheral_base to off_t")
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7888
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
and DP_SELECT_DPBANK.
Use the defined symbols instead of magic numbers.
Change-Id: I19c86b183e57e42b96f76eed180c0492cd67bee1
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7539
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
DP_SELECT_APSEL and DP_SELECT_APBANK is no more used in ADIv6.
Change-Id: I4176574d46c6dc8eb3fe3aef6daab6e33492c050
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7538
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
add refresh command for lattice devices
rename gowin reprogram to refresh
rename virtex2 program to refresh
Change-Id: I9da83a614b96da3e947ac4608b0a291b1d126914
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7839
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Provide jtagspi with specific procedures to be able to
use jtagspi for programming spi-flash devices on cologne
chip gatemate devices.
Change-Id: Ifa1c4ca6e215d7f49bd21620898991af213812e9
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7838
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Provide jtagspi with information to use jtagspi for
programming spi-flash devices on intel devices using
a proxy bitstream.
Change-Id: Ib947b8c0dd61e2c6fa8beeb30074606131b1480f
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7837
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Provide jtagspi with information to use jtagspi for
programming spi-flash devices on xilinx devices
using a proxy bitstream.
Change-Id: I68000d71de25118ed8a8603e544cff1dc69bd9ba
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7836
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Provide jtagspi with information to use jtagspi for
programming spi-flash devices on efinix trion and
titanium devices using a proxy bitstream.
Change-Id: I4a851fcaafe832c35bd7b825d95a3d08e4d57a7b
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7826
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Provide jtagspi with specific procedures to be able to
use jtagspi for programming spi-flash devices on lattice
certus and certus po devices.
Change-Id: I6a8ec16be78f86073a4ef5302f6241185b08e1c6
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7825
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Provide jtagspi with specific procedures to be able to
use jtagspi for programming spi-flash devices on lattice
ecp5 devices.
Change-Id: I4a4a60f21d7e8685a5b8320b9c6ebdc2693bbd21
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7824
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Provide jtagspi with specific procedures to be able to
use jtagspi for programming spi-flash devices on lattice
ecp2 and ecp3 devices.
Change-Id: I39028aba47a74a0479be16d52d318f4bff7f2ed4
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7823
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Jtagspi is using a proxy bitstream to "connect" JTAG to the
SPI pins. This is not possible with all FPGA vendors/families.
In this cases a dedicated procedure is needed to establish such
a connection.
This patch adds a jtagspi-mode for these cases. It also adds the
needed interfaces to jtagspi and the pld-driver so the driver
can select the mode and provide the necessary procedures.
For the cases where a proxy bitstream is needed, the pld driver
will select the mode and provide instruction code needed in this
case.
Change-Id: I9563f26739589157b39a3664a73d91152cd13f77
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7822
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
struct flash_bank must be zeroed anyway, calloc() is always used.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I7ab3b9c66f99688c6095a0a547a05448c9e37d68
Reviewed-on: https://review.openocd.org/c/openocd/+/7885
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
at91sam7 flash driver allocates a flash bank based on detected flash
structure.
Use calloc() instead of malloc() - struct flash_bank has to be zeroed.
While on this:
Return error in case of struct flash_bank or driver_priv allocation fail.
Set default_padded_value and erased_value.
Use strdup() on bank->name, pointer is freed in flash_free_all_banks()
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Id890496bfbadb7970ef583256aa4f30a7bff832f
Reviewed-on: https://review.openocd.org/c/openocd/+/7884
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
STM32WBA5x have a single bank flash up to 1MB
Change-Id: I3d720e202f0fdd89ecd8aa7224653ca5a7ae187b
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@st.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7694
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Recent commit 62f76b2169 ("flash/nor: add support for Nuvoton
NPCX4/K3 series flash") introduces a memory leak for a missing
free() on early return for an error.
Add the free() on the return path on error.
Change-Id: Ica8568a986802e23df2ab7bed4e8cc4bbb6305a5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 62f76b2169 ("flash/nor: add support for Nuvoton NPCX4/K3 series flash")
Reviewed-on: https://review.openocd.org/c/openocd/+/7894
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
For ARMv8, add AArch64 mdd and mwd support. AArch32 not supported.
Change-Id: I25490471e16943e5a67d7649595d77643aa9a095
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7192
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
According to gdb documentation, `g` and `p` packets can report a
register being unavailable by a string of 'x' instead of register's
value.
Change-Id: I8ef279f1357c2e612f5d3290eb0022c1b47d9fa7
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7876
Reviewed-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Anatoly Parshintsev <kupokupokupopo@gmail.com>
Tested-by: jenkins
Previously, if a pin was configured as ADAPTER_GPIO_INIT_STATE_INPUT and
its drive value was ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL, initialize_gpio
would configure the pin as an output.
The set_gpio_value function is optimized to not set the direction for
pins configured as ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL as it only needs to
be set once. When initialize_gpio performs this setup, it checked only
that the drive value was ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL to set the
output direction but did not exclude input pins which have already had
their direction set.
Now, input pins are ignored when initialize_gpio checks for
ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL to set the mode to output.
Fixes: ace028262b ("drivers/am335xgpio: Migrate to adapter gpio commands")
Change-Id: I9ea502c400ea4ffae37080b9cee891ca9176a47d
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7877
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Steve Marple <stevemarple@googlemail.com>
Previously, if the image file was less than 9 bytes long,
it was assumed to be an error when it could be a binary
image file. This patch makes OpenOCD detect these cases
as binary files.
Change-Id: I5b4dad2b547786246887812ac75907378fe58671
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7880
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Added NPCX flash driver to support the Nuvoton NPCX4/K3 series
microcontrollers. Add config file for these series.
Change-Id: I0b6e128fa51146b561f422e23a98260594b1f138
Signed-off-by: Luca Hung <YCHUNG0@nuvoton.com>
Signed-off-by: Mulin CHao <mlchao@nuvoton.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7794
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch unifies the lines printed by the "bp" command
so that different types of breakpoints are printed in
the same format.
Change-Id: Ic1335eda1c58072a334aed9cf0011431c8ec86a4
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7861
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Now internal watch/breakpoint will not be removed in case
of error during removing triggers from hardware.
Also change signature of some functions (for deletion
bp/wp) to print message in case of some error.
Change-Id: I71cd1f556a33975005d0ee372fc384fddfddc3bf
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7738
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Previously, if a pin was configured as ADAPTER_GPIO_INIT_STATE_INPUT and
its drive value was ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL, initialize_gpio
would configure the pin as an output.
The set_gpio_value function is optimized to not set the direction for
pins configured as ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL as it only needs to
be set once. When initialize_gpio performs this setup, it checked only
that the drive value was ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL to set the
output direction but did not exclude input pins which have already had
their direction set.
Now, input pins are ignored when initialize_gpio checks for
ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL to set the mode to output.
Change-Id: I4fc7a8132a6b00c7f213ec9fd05c7bbb37ee5f20
Fixes: 0dd969d83b ("drivers/bcm2835gpio: Migrate to adapter gpio commands")
Signed-off-by: Brandon Pupp <bpupp@xes-inc.com>
[vfazio: update commit message]
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7862
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
add new i2c bit-banging feature, we can now connect in JTAG with the SoC
target and in i2c with the main board components at the same time.
Change-Id: I8e4516fe1ad5238e0373444f1c3c9bc0814d0f52
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7796
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
add a line that checks the returned value of set signals function
add two VIDs of other original boards (have onboard angie architecture)
so angie driver can connect to them and change their VID after
renumeration.
Change-Id: Ide4f1f6f38168a410191bf3ff75bcd59dcf7ef50
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7795
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Introduce the ability to detect CPUs based on CP0 PRId register and
apply cpu specific quirks, which alter the default ejtag behavior.
First of those is EJTAG_QUIRK_PAD_DRET, which makes sure extra NOPs are
placed after the DRET instruction on exit from debug mode. This fixes
resume behavior on Ingenic JZ4780 SoC.
The proper detection of some (currently unsupported) CPUs becomes quite
complicated, so please consult the following Linux kernel code when
adding new CPUs:
* arch/mips/include/asm/cpu.h
* arch/mips/kernel/cpu-probe.c
Change-Id: I0f413d5096cd43ef346b02cea85024985b7face6
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7859
Tested-by: jenkins
stlink v2 on Nucleo-64 board (e.g. NUCLEO-L476RG) has target SWO signal
connected to STM32F103CB'S PA10, which is UART1_RX. UART1 within this
MCU in theory can be configured to 4.5 Mbps baudrate, which means this
is the upper limit supported by HW. As a confirmation BMP (Black Magic
Probe) project also states in documentation that UART1 can be used with
up to 4.5 Mbps baudrate.
Tests have shown that configuring 4.5 Mbps baudrate on stlink v2
available on NUCLEO-L476RG board results in receiving corrupted data.
Using 2.25 Mbps however allows to successfully receive all data from
SWO. This makes sense in terms of STM32F103CB capabilities, since 2.25
Mbps is the next supported baudrate due to division by 2.
Increase supported stlink v2 SWO speed from 2 to 2.25 Mbps.
Tested with NUCLEO-L476RG:
$ stm32l4x.tpiu configure -protocol uart \
-traceclk 80000000 -pin-freq 2250000 \
-output /dev/stdout
$ stm32l4x.tpiu enable
2.25 Mbps speed confirmed with logic analyzer.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Change-Id: Icbec04585664aba8b217e8f9a75458e577f7617f
Reviewed-on: https://review.openocd.org/c/openocd/+/7848
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This emulation mode supports software translation of an AP request
into an address mapped transaction that does not rely on physical AP
hardware. This is necessary in some hardware such as K3 SoCs since the
hardware architecture anticipates a potential race condition between
AP doing direct memory access generating transactions back to system
bus and firewalls that data path out.
This emulation mode allows direct memory driver to emulate CoreSight
Access Port (AP) and reuse the SoC configuration meant for JTAG
debuggers.
Since the address ranges are flat in nature, the requisite memory base
and size will need to be provided a-priori to the driver for mapping.
The other design alternative would be to map requested memory map for
every register operation, but, that would defeat our intent of getting
max debug performance.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jason Peck <jpeck@ti.com>
Change-Id: I2d3c5f7833f1973e90b4f6b247827f62fc2905d0
Reviewed-on: https://review.openocd.org/c/openocd/+/7089
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Direct memory driver support for CoreSight Access Port(AP).
Even though we emulate SWD (serial wire debug), we aren't actually
using swd. Instead, we are using a direct memory access to get to the
register set. This is similar in approach to other fast access native
drivers such as am335xgpio drivers.
Example operation on Texas Instrument's AM62x K3 SoC:
+-----------+
| OpenOCD | SoC mem map
| on |--------------+
| Cortex-A53| |
+-----------+ |
|
+-----------+ +-----v-----+
|Cortex-M4F |<───────| |
+-----------+ | |
| DebugSS |
+-----------+ | |
|Cortex-M4F |<───────| |
+-----------+ +-----------+
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jason Peck <jpeck@ti.com>
Change-Id: I8470cb15348863dd844b2c0e3f63a9063cb032c6
Reviewed-on: https://review.openocd.org/c/openocd/+/7088
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Since zephyrproject-rtos/zephyr@c3eeae8,
Zephyr OS exposes offset of mode_exc_return in the arch struct for ARM.
Accounting for this allows for consistency and enables
logic with further offsets that may be added after this.
Signed-off-by: Bruno Mendes <bd_mendes@outlook.com>
Change-Id: Id53ebd80c5d98a7d94eb6b00ad638ce51e719822
Reviewed-on: https://review.openocd.org/c/openocd/+/7851
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
These cores are advertised as M23 and M33 compatible, but are identified
by the Realtek implementor id. These cores are found on the RTL872xD
family, at least.
Raw CPUIDs:
Real-M200 (KM0): 721cd200
Real-M300 (KM4): 721fd220
Change-Id: I4106ccb7e8c562f98072a71e9e818f57999d664e
Signed-off-by: Karl Palsson <karlp@tweak.au>
Reviewed-on: https://review.openocd.org/c/openocd/+/7846
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Presently, we only look at the Part Number field of the CPUID, and
completely ignore the Implmentor field, simply assuming it to be ARM.
Parts have since been found, with different implementors, that use
overlapping part numbers, causing detection to fail.
Expand the "part number" field to be a full implementor+part number,
excluding the revision/patch fields, to make checking more reliable.
Change-Id: Id81774f829104f57a0c105320d0d2e479fa01522
Signed-off-by: Karl Palsson <karlp@tweak.au>
Reviewed-on: https://review.openocd.org/c/openocd/+/7845
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
There's really no reason to try and add an extra layer of cpu
verification here.
Change-Id: If8c4aa03754607be6c089f514ae300b09b067ffa
Signed-off-by: Karl Palsson <karlp@tweak.au>
Reviewed-on: https://review.openocd.org/c/openocd/+/7844
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use blocks (64 KiB) instead of sectors (4 KiB) when erasing the zd25Q16
SPI flash memory (thanks to Tomas Vanek!)
Change-Id: I969a69ad35f51b84eb3e11b93f0d79db3e98613a
Signed-off-by: Nikolay Dimitrov <nikolay.dimitrov@retrohub.org>
Reviewed-on: https://review.openocd.org/c/openocd/+/7850
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Add missing aarch64_poll() calls to ensure the event
TARGET_EVENT_HALTED is called when necessary.
This is needed with the poller update introduced in commit
95603fae18 ("openocd: revert workarounds for 'expr' syntax change")
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Change-Id: I6e91f1b6bc1f0d16e6f0eb76fc67d20111e3afd2
Reviewed-on: https://review.openocd.org/c/openocd/+/7737
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This is the driver code for NanoXplore's ANGIE USB-JTAG Adapter.
The driver is based on the openULINK project.
This driver communicate with ANGIE's firmware in order to establish
JTAG protocol to debug the target chip.
Since the ANGIE Adapter has a Spartan-6 FPGA in addition to the
FX2 microcontroller, the driver adds two functions, one to download
the firmware (embedded C) to the FX2, and the second to program
the FPGA with its bitstream.
Add ANGIE's configuration file to tcl/interface/
Add the device VID/PID to 60-openocd.rules file.
Add ANGIE to OpenOCD's documentation
Change-Id: Id17111c74073da01450d43d466e11b0cc086691f
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7702
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The USB control transfer can be executed without any data.
The libusb API libusb_control_transfer() can thus be called with
zero 'size', thus returning zero byte transferred when succeed.
The OpenOCD API jtag_libusb_control_transfer() returns zero either
in case of transfer error and in case of libusb_control_transfer()
returning zero, making impossible discriminating the two cases.
Extend jtag_libusb_control_transfer() with separate return value
for error code and explicit parameter's pointer for transferred
bytes.
Make the transferred pointer optional, as many callers do not
properly handle the returned value.
Use 'int' type pointer for transferred, instead of the 'uint16_t'
that would have matched the type of 'size'. This can simplify the
caller's code by using a single 'int transferred' variable shared
with other jtag_libusb_bulk_read|write, while keeping possible the
comparison int vs uint16_t without cast.
This change is inspired from commit d612baacaa
("jtag_libusb_bulk_read|write: return error code instead of size")
Change-Id: I14d9bff3e845675be03465c307a136e69eebc317
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7756
Tested-by: jenkins
Reviewed-by: ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
This patch changes data types of watchpoint value and mask to allow for
64-bit values match that some architectures (like RISCV) allow.
In addition this patch fixes the behavior of watchpoint command to
zero-out mask if only data value is provided.
Change-Id: I3c7ec1630f03ea9534ec34c0ebe99e08ea56e7f0
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7840
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Marek Vrbka <marek.vrbka@codasip.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
register_cache_invalidate() is written a way which uses
pointer arithmetic, which makes it harder to read. This patch
replaces it with more readable way to iterate over array of
structs.
Change-Id: Ia420f70a3bb6998c690c8c600c71301dca9f9dbf
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7735
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Lot of messages was logged as LOG_WARNING, but the operation failed
immediately. Sometimes no error message was logged at all.
Add missing messages, change warnings to errors.
Sometimes ERROR_TARGET_INVALID was returned. Some command handlers
returned ERROR_OK! Always return ERROR_TARGET_NOT_HALTED.
While on it use LOG_TARGET_ERROR() whenever possible.
Prefix command_print() message with 'Error:' to get closer
to LOG_TARGET_ERROR() variant.
Error message was not added to get() and set() methods of
struct xxx_reg_type - the return value is properly checked and a message
is logged by the caller in case of ERROR_TARGET_NOT_HALTED.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I2fe4187c6025f0038956ab387edbf3f461c69398
Reviewed-on: https://review.openocd.org/c/openocd/+/7819
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Compiler would complain that `written` was used without being
initialized.
Simplify the code a little. The number of bytes written is already
checked in usb_write().
Signed-off-by: Tim Newsome <tim@sifive.com>
Change-Id: Ibada85dcccfca6f1269c584cdbc4f2e3b93bb8f3
Reviewed-on: https://review.openocd.org/c/openocd/+/7813
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
While not affecting the function's main purpose, an error has
crept into arc_save_context() that results in logging wrong register
values when the debug level is 3 or more. For instance, when debugging a
trivial program and halting at entry to main, the following values are
printed to the log:
Debug: 2915 2020 arc.c:894 arc_save_context(): Get core register regnum=0,
name=r0, value=0x0000000
...
Debug: 2947 2020 arc.c:894 arc_save_context(): Get core register regnum=60,
name=lp_count, value=0x900002d8
Debug: 2948 2020 arc.c:894 arc_save_context(): Get core register regnum=63,
name=pcl, value=0xffffffff
Debug: 2949 2020 arc.c:909 arc_save_context(): Get aux register regnum=64,
name=pc, value=0x900000b4
Debug: 2950 2020 arc.c:909 arc_save_context(): Get aux register regnum=65,
name=lp_start, value=0x900000bc
Debug: 2951 2020 arc.c:909 arc_save_context(): Get aux register regnum=66,
name=lp_end, value=0x00080801
Debug: 2952 2020 arc.c:909 arc_save_context(): Get aux register regnum=67,
name=status32, value=0xffffffff
After the change, the register contents make much more sense:
Debug: 2923 3934 arc.c:889 arc_save_context(): Get core register regnum=0,
name=r0, value=0x00000000
...
Debug: 2955 3934 arc.c:889 arc_save_context(): Get core register regnum=60,
name=lp_count, value=0x00000000
Debug: 2956 3934 arc.c:889 arc_save_context(): Get core register regnum=63,
name=pcl, value=0x900002d8
Debug: 2957 3934 arc.c:903 arc_save_context(): Get aux register regnum=64,
name=pc, value=0x900002da
Debug: 2958 3934 arc.c:903 arc_save_context(): Get aux register regnum=65,
name=lp_start, value=0x900000b4
Debug: 2959 3934 arc.c:903 arc_save_context(): Get aux register regnum=66,
name=lp_end, value=0x900000bc
Debug: 2960 3934 arc.c:903 arc_save_context(): Get aux register regnum=67,
name=status32, value=0x00080801
While at it, simplify a couple of expressions.
Change-Id: I8f2d79404707fbac4503af45b393ea73f91e6beb
Signed-off-by: Artemiy Volkov <artemiy@synopsys.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7765
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Memory region addresses are not in use for now.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I9a2189e956ae59b56245ec914ab16719df857b2d
Reviewed-on: https://review.openocd.org/c/openocd/+/7762
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Right after target halt, some activities needs to be done
such as printing exception reason, disable wdts and reading
debug stubs information.
Missing activities will be submitted in the next patches.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I27aad5614d903f4bd7c8d6dba6bfb0bdb93ed8dc
Reviewed-on: https://review.openocd.org/c/openocd/+/7757
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
See section 57.6.1 in RM0432.
Change-Id: Ic4977aee74d1838f420c1d9ff19925d09f8f6e2b
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7763
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
STLINK-V3PWR is both a standalone debugger probe compatible with
STLINK-V3 and a source measurement unit (SMU).
Link: http://www.st.com/stlink-v3pwr
This code adds support for the debugger probe functionality.
Change-Id: Ib056e55722528f922c5574bb6fbf77e2f2b2b0c1
Signed-off-by: Laurent LEMELE <laurent.lemele@st.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7755
Tested-by: jenkins
To start a ipdbg server one needs to know the tap and the
instruction code to reach the IPDBG-Hub. This instruction is
vendor/family specific. Knowledge which can be provided by the
pld driver.
Change-Id: I13eeb9fee895d65cd48544da4704fcc9b528b869
Signed-off-by: Daniel Anselmi <danselmi@gmx.ch>
Reviewed-on: https://review.openocd.org/c/openocd/+/7369
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch fixes the handling of errno by setting the sys_errn
only if error has actually occurred during the semihosting call.
It also fixes few issues where error was not set in the first place.
Change-Id: I2fbe562f3ec5e6220b800de04cd33aa1f409c7a0
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7730
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
This patch introduces function semihosting_opcode_to_str() which
converts semihosting opcodes to strings. This function is then
used in debug messages to improve log analysis and troubleshooting.
Change-Id: Iffea49dae13d6a626ae0db40d379cba3c9ea5bd3
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7726
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
The original document from Jedec does not report the entry for
"21 NXP (Philips)", replaced by "c". It's clearly a typo.
Keep the line from JEP106BF.01 for "NXP (Philips)".
Change-Id: I30215c4ff08d5f112305cde6ab7a3176cdcef948
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7727
Tested-by: jenkins
On Windows, isatty() can return any non-zero value if it's an interactive
device. Which diverges from the ARM semihosting specification. This patch
introduces a fix to make the SYS_ISTTY operation conform to spec.
Change-Id: I9bc4f3cb82370812825d52419851910b3e3f35cc
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7725
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
The old implementation of gdb socket error handling
in the gdb_get_char_inner() differs between Windows and *nix
platforms. This patch simplifies it by using an existing
function log_socket_error() which handles most of the platform
specific things. It also provides better error messages.
Change-Id: Iec871c4965b116dc7cfb03c3565bab66c8b41958
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7724
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Added debug prints to show what is the target debug reason. Also added
debug print for Ctrl-C response. This is useful for troubleshooting and
log analysis.
Change-Id: I055936257d989efe7255656198a8d73a367fcd15
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7720
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
This patch adds support for the NXP QN908x family of Bluetooth
microcontrollers, such as the QN9080. This chip features a Cortex-M4F
with 512 KiB of flash on all the available versions, although the
documentation suggests that there might be 256 kB versions as well.
The initial support allows to read, erase and write the whole user flash
area. Three new sub-commands under the new "qn908x" command are added
in this patch as well: disable_wdog to disabled the watchdog,
mass_erase to perform a mass erase and allow_brick to allow programming
images that disable the SWD interface.
Disabling the watchdog is required after a "reset halt" in order to run
the CRC algorithm from RAM when verifying the chip. However, this is not
done automatically on probing or other initialization since disabling
the watchdog might interfere with debugging real applications.
The "mass_erase" command allows to erase the whole flash without
probing it, since in some scenarios the chip can be locked such that no
flash or ram can be accessed from the SWD interface, allowing only to
run a mass_erase to be able to flash the program.
The flashing process allows to compute a checksum, similar to the
lpc2000 driver "calc_checksum" but done over a different region of the
memory. This checksum is required to be present for the QN908x
bootloader ROM to boot, and otherwise is useless. As with the lpc2000
design, verification when using "calc_checksum" is expected to fail if
the checksum was not valid in the image being verified.
This was manually tested on a QN9080, including the scan-view,
AddressSanitizer/UBSan and test coverage configurations.
Change-Id: Ibd6d8f3608654294795085fcaaffb448b77cc58b
Co-developed-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Signed-off-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Signed-off-by: iosabi <iosabi@protonmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/5584
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This change implements the predefined type tap_state instead of generic
uint8_t in the driver
Change-Id: I3478e8d7b40b961f3ba77711179016cdcc35cd32
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7722
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
This change fixes endianness support in the driver.
Change-Id: Ida360bb58e988cea0a66fdc79e1610b528846fc4
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7721
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Clang reports that 3rd function call argument is an uninitialized value
file esp32_apptrace.c line:1270
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I73e254d4eb0c6b3152229717d8827d334784ab92
Reviewed-on: https://review.openocd.org/c/openocd/+/7719
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Clang is unable to fully track the content of the array
write_buffer[] and incorrectly complains that it could contain
some uninitialized value.
To help clang to track the execution flow, rewrite the handling of
the buffer by using simpler indexing and by moving away cmd_byte
from the first buffer's element to the variable cmd_byte.
While there:
- fix the error codes returned while parsing the command line and
- use directly command_print_sameline() instead of passing through
intermediate buffers.
Change-Id: I1969e896887ea3a4abebee057cc04c03005fa57c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7718
Tested-by: jenkins
Clang 15.0.7 complains about snprintf output truncation due to
output between 13 and 22 bytes into a destination of size 20.
Increase the size of the buffer.
Change-Id: I0369255ca1bc02a0cf494f765e91a608c960a0d6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7717
Tested-by: jenkins
Value in the 'dscsr' variable is garbage until the DAP queue is run.
Postpone evaluation of the 'secure_state' variable. Reading the
core registers in between will execute the DAP queue.
Change-Id: I44959e882dbafb1b9779e813c3d13f3b3dbcd47f
Signed-off-by: Bohdan Tymkiv <bohdan200@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7693
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The registers pauth_dmask and pauth_cmask are not accessible in
AARCH32 mode. Tagging them as 'hidden' is not enough and triggers
error:
Failed to read pauth_dmask register
while halting the core.
Tag the pauth registers as not existing, unless required by user.
Note: for non existing registers there should be no need to
allocate their register cache. Let's keep this for a further
improvement.
Change-Id: Iaa0d006a3d8ee611ee93333ed49a8615a6c94276
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: d0436b0cda ("armv8: Add support of pointer authentication")
Reviewed-on: https://review.openocd.org/c/openocd/+/7712
Tested-by: jenkins
Reviewed-by: Koudai Iwahori <koudai@google.com>
- Manual integration of File-IO support from xt0.2 release
- Verified with applications linked using gdbio LSP
- No new clang static analysis warnings
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: Iedc5f885b2548097ef4f11ae1a675b5944f5fdf0
Reviewed-on: https://review.openocd.org/c/openocd/+/7550
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Removed an unused include from src/jtag/adapter.c.
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Change-Id: Ia5ea0acdfa1c011d7c88decd0f63e8032aafd699
Reviewed-on: https://review.openocd.org/c/openocd/+/7687
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The function is used for commands:
- jtag tapisenabled
- jtag tapenable
- jtag tapdisable
While there, add the missing .help and .usage fields and fix the
incorrect check in jtag_tap_enable() and jtag_tap_disable().
Change-Id: I0e1c9f0b8d9fbad19d09610a97498bec8003c27e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7554
Tested-by: jenkins
While there:
- fix memory leak in case of error on values tap->chip,
tap->tapname, tap->expected_ids;
- check for out of memory error;
- fix minor coding style issue;
- add the missing .usage field;
- remove functions not in use anymore.
Change-Id: I1c8c3ffeb324e9eacb919c7e0d94fd72122c9a81
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7431
Tested-by: jenkins
Change the prototype of functions:
- target_run_algorithm()
- target_wait_algorithm()
- target_wait_state()
- struct target_type::run_algorithm()
- struct target_type::wait_algorithm()
to use unsigned int for timeout_ms instead of int.
Change accordingly the variables passed as parameter.
Change-Id: I0b8d6e691bb3c749eeb2911dc5a86c38cc0cb65d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7562
Tested-by: jenkins
While there, add the missing .usage field and remove the now
unused function jim_target_tap_disabled().
Change-Id: I79afcc5097643fc264354c6c3957786a55f40498
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7561
Tested-by: jenkins
The function esp32_cmd_apptrace_generic() is not used outside the
file.
Declare it as static.
Detected through 'sparse' tool.
Change-Id: I08c6b92fb01594320bc3ae6b16067ac4eb51ca12
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7676
Tested-by: jenkins
This reverts commit 047b1a8fc2.
Commit 047b1a8fc2 ("target/image: zero-initialize ELF segments
up to p_memsz") breaks the backward compatibility introducing some
problem:
- an empty bss segment with paddr in SRAM gets zero filled at load
but does not survive after a reset, causing verify to fail;
- an empty bss segment with paddr in FLASH causes excessive flash
usage, which can exceed flash size (causing error) and makes
flash aging faster.
Revert it while looking for a better implementation.
Change-Id: Iaaf926dafce46a220a5bbe20c8576eb449996d76
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7658
Reviewed-by: Bohdan Tymkiv <bohdan200@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-by: Peter Collingbourne <pcc@google.com>
Tested-by: jenkins
Trying to disable OTP write protection by running e.g. `flash protect
1 0 1 off` would already be rejected with an error code, but that would
result in a generic "failed setting protection for blocks 0 to 1"
message. Now a more specific error message is also printed, telling the
user why it failed.
Change-Id: I6d4974eb0bcd23a0a6cf68ff955d9e59b8b1b06a
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Reviewed-on: https://review.openocd.org/c/openocd/+/7615
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
When a DMI operation does not succeed (either because of a timeout
or an error), the specification says that the error in the `op`
field is sticky and needs to cleared by writing `dmireset` in `dtmcs`.
This is already done for timeouts in increase_dmi_busy_delay
but not for errors.
Change-Id: I7c5f27a5cf145511a1a8b64a45a586521e1cbe41
Signed-off-by: Amaury Pouly <amaury.pouly@lowrisc.org>
Reviewed-on: https://review.openocd.org/c/openocd/+/7688
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
this new STM32 series family introduces 2 devices:
STM32C011xx (0x443) and STM32C031xx (0x453)
both devices have 32 Kbytes single flash bank.
Change-Id: I4e890789e44e3b174c0e9c0e1068383ecdbb865f
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6874
Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The bcm2835gpio driver preferred /dev/gpiomem for access to
memory mapped GPIO control and used /dev/mem as a fallback
only if it couldn't open /dev/gpiomem.
/dev/mem usually requires elevated rights or specific capabilities
of the opening process, so the fallback failed anyway.
Although /dev/gpiomem is the strongly preferred option with respect
to security, there could be also use cases which require /dev/mem
even if /dev/gpiomem is available (e.g. changing the GPIO pad
settings is necessary or testing/debugging OpenOCD).
It was difficult to handle such cases because they required
to block globally the system device /dev/gpiomem
(remove, rename or chmod).
Drop the fallback feature and select the memory device
by 'bcm2835gpio peripheral_mem_dev' configuration command.
Use /dev/gpiomem as a default.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I60e427bda795d7a13d55d61443590dd31d694832
Reviewed-on: https://review.openocd.org/c/openocd/+/7350
Tested-by: jenkins
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Raspberry Pi 4 with 64-bit kernel and arm_peri_high=1 config.txt
parameter needs peripheral_base 0x47e000000, uint32_t is not enough.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Icedd084e2916657fa4478d452a5eb1e84a45c281
Reviewed-on: https://review.openocd.org/c/openocd/+/7685
Tested-by: jenkins
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The pads were configured at a wrong memory address
if /dev/gpiomem was mapped.
The pad setting registers are not accessible in mapped /dev/gpiomem,
disable the pads setting if the driver doesn't open /dev/mem.
While on it, do not fail the driver initialization if pad mapping fails
- just emit a warning and work with unchanged pad setting.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I0bce76cade8f7efd75efd9087a7d9ba6511a6239
Reviewed-on: https://review.openocd.org/c/openocd/+/7684
Tested-by: jenkins
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Commit dd9137dc0e ("pld/virtex2: add missing error checks") adds
checks on the return value of several functions, allowing also
virtex2_read_stat() to propagate such returned values.
This triggers an error with clang, as it is now able to identify a
possible execution path that makes uninitialized the variable
status.
Check for the returned value of virtex2_read_stat() before using
the variable status and propagate the returned value.
While there, drop a useless empty string.
Change-Id: I7a23d3f904d4e07cdb6f6dfdf1179889b6b8afb8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7657
Reviewed-by: Daniel Anselmi <danselmi@gmx.ch>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The static analyser 'sparse' complains about using sizeof() on a
struct that has variable size:
src/rtos/uCOS-III.c:267:32: warning: using sizeof on a flexible structure
src/rtos/uCOS-III.c:269:41: warning: using sizeof on a flexible structure
src/rtos/uCOS-III.c:275:66: warning: using sizeof on a flexible structure
The struct ucos_iii_params contains either constants values for
different target type and variable fields. The last field is an
variable size array, always allocated to UCOS_III_MAX_THREADS
items. It's not practical to fix this size because we would get
too huge initialization in data segment.
Split away from struct ucos_iii_params all the variable fields and
put them in struct ucos_iii_private. Add in the new struct a
pointer to the selected element of ucos_iii_params_list[] and fix
the size of array threads[] to its maximum value; this would be
allocated at run-time, avoiding impacts to data segment.
Change-Id: I569011a257783d35a8795adbda06e942b4157f2a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7678
Tested-by: jenkins
The function rtos_thread_packet() is used across rtos and declared
locally as extern.
Move the prototype of the function in common include rtos.h
Change-Id: I50d311b583148a2de628de0997ef1afc9103a70e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7677
Tested-by: jenkins
The struct containing SWD and JTAG operations are declared as
extern in the C file.
Mode them in include file arm_adi_v5.h to silent 'sparse' error
for global variable definition without declaration in an include
file.
Change-Id: I59088512c052d5a120c38404a882ed512a68ca02
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7675
Tested-by: jenkins
The pointer nand_devices is used in two file.
Move the extern prototype in code.h
Detected through 'sparse' tool.
Change-Id: I7237359fd1a008770a624725cd0b3d8632b4166e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7674
Tested-by: jenkins
The internal variable 'gdb_actual_connections' is used by log and
by semihosting to determine if there are active GDB connections.
Keep the variable local in server's code and only export its value
through a dedicated function.
This solves the issue detected by 'parse' of the variable defined
as global but not declared in any include file.
Change-Id: I6e14f4cb1097787404094636f8a2a291340222dd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7673
Tested-by: jenkins
The function jtag_debug_state_machine_() is only used by a static
inline function and declared inside it as private.
The static analyser 'sparse' complains that the function is
defined as global but not cross checked against a prototype in an
include file.
Move the declaration outside the inline function so it get visible
by interface.c, which already includes interface.h
While there, change the argument type from 'unsigned' to 'unsigned
int' to pass checkpatch check.
Change-Id: Ia5dfb92dc4bc6d52ead4f0cb8c68319c83ff85b0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7672
Tested-by: jenkins
Let source file to include its file .h to validate the exported
prototypes.
Detected through 'sparse' tool.
Change-Id: I6197f21c857833dafc3d6e3b750c764bf4610abd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7671
Tested-by: jenkins
The static analyser 'sparse' complains about values bigger that
255 that gets cast-ed and/or stored in an 8 bit variable.
Rework the functions:
- h_u32_to_le()
- h_u32_to_be()
- h_u24_to_le()
- h_u24_to_be()
- h_u16_to_le()
- h_u16_to_be()
to avoid all the related warnings, without adding any functional
change. Any modern compiler should not be impacted by this.
Change-Id: I0b84043600a41c72d0e4ddb3dd195d69e3b2896b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7670
Tested-by: jenkins
The new committed files add some warning from the static analyser
'sparse':
- Don't assign pointer to 0, use NULL.
- switch with no cases.
Fix them.
Change-Id: I2c02d629bd80b71c8e42553be5d9388bb9b6bcd0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7668
Tested-by: jenkins
The static analyser 'sparse' complains that the functions
clear_malloc() and fill_malloc() are defined global but not cross
checked against a prototype in an include file.
Rework replacements.h and replacements.c to let the former be
included by the latter.
Change-Id: I536393a9c3718dcd7e144cde8f02e169f64c88e0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7667
Tested-by: jenkins
Don't use 'extern' in a C file, but declare the exported function
in a H file.
This helps validating the function prototype across declaration
and use.
Detected through 'sparse' tool.
Change-Id: I2c22b084fb513f4b3b1b1db96dfbc8fa4bfe7238
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7666
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a jtag
driver, that the struct adapter_driver is declared in the file as
non static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of adapter_driver's declaration in interface.h
Drop the preprocessor #ifdef/#endif around the declaration, as it
has no effect when the declaration is not used and/or the symbol
does not exist.
Change-Id: I5b8f5fe48a89ff0ffce38d547c551cd196379fbf
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7665
Tested-by: jenkins
Let source files to include its file .h to validate the exported
prototypes.
Detected through 'sparse' tool.
Change-Id: I217c2903fdb19e1a2cce39d2536a903c3d72f3f7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7664
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a pld
driver, that the struct pld_driver is declared in the file as
non static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of pld_driver's declaration in pld.h
Change-Id: I0f917aecc7534c1b51af0afa9b32ccfd33db3511
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7663
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a nor
driver, that the struct flash_driver is declared in the file as
non static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of flash_driver's declaration in driver.h
Fix some incorrect non-const declaration and remove redundant
forward declarations.
Change-Id: I5e41d094307aac4a57dfa9a70496ff3cf180bd92
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7662
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a nand
driver, that the struct nand_flash_controller is declared in the
file as non static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of nand_flash_controller's declaration in driver.h
While there, drop the unused/commented boundary scan controller.
Change-Id: I7dc32cef55be13ba537abe0f4c47b135d837126c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7661
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a rtos'
file, that the struct rtos_type is declared in the file as non
static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of rtos_type's declaration in rtos.h
Change-Id: Ia96dff077407a6653b11920519c1724e4c1167a3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7660
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a target's
file, that the struct target_type is declared in the file as non
static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of target_type's declaration in target_type.h
While there, fix a name clash in stm8.c
Change-Id: Ia9c681e0825cfd04d509616dbc04a0cf4944f379
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7659
Tested-by: jenkins
To perform any meaningful manipulations with DR the corresponding IR should
be set to a relevant instruction, not BYPASS, so warn the user accordingly.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Change-Id: I42580ecd75ae824a4145f6f17f0df9bcf825b50f
Reviewed-on: https://review.openocd.org/c/openocd/+/7654
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
It's customary to use [] brackets to mean the argument is optional, but
drscan requires at least one pair of "num_bits value" so change it to ().
In common regular expressions * means 0 or more, and + means 1 or more,
so change that too.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Change-Id: Ib15d833bda2aa398ad1345a042f97d91c98dbf66
Reviewed-on: https://review.openocd.org/c/openocd/+/7653
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
While there, add the missing .usage field and move in target.c the
enum nvp_assert.
Change-Id: Ia4f2f962887b5a35faeaa4eae128fa2865569b24
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7559
Tested-by: jenkins
Reorganize the code to parse the command line only once.
Add check for successful memory allocation.
Change-Id: Ibf6068e177c09e93150d11aecfcf079348c47c21
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7555
Tested-by: jenkins
For some trivial case only, replace calls to jim-nvp with calls
to the new OpenOCD nvp.
Change-Id: Ifd9aff32b67748af8ab808e6a6b6e64f5271b888
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7553
Tested-by: jenkins
New gcc does not understand that the variable 'restore_ms' is set
to 'true' only when the variable 'ms' is assigned in
static int xtensa_write_dirty_registers(...)
{
xtensa_reg_val_t ms;
bool restore_ms = false;
...
if (...) {
ms = regval;
restore_ms = true;
...
}
...
if (restore_ms) {
USE(ms);
}
...
}
and complains about possible use of uninitialized variable 'ms'.
Sadly initialize 'ms' to zero to hide this false positive.
Change-Id: I1fb3949070c8abbf4aa45a740f0ca2fdb753d4fa
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7681
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-by: Ian Thompson <ianst@cadence.com>
Tested-by: jenkins
Current code tests a function pointer against a numeric value that
is the same enum type as returned by the pointed function.
Clearly the author was willing to call the function and check its
returned value.
Fix the check by calling the function.
Detected through 'sparse' tool.
Change-Id: I27d18d26c2c797160a397daa32835c199014b70b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Checkpatch-ignore: GIT_COMMIT_ID
Fixes: 237e894805 ("reworked etm/etb into a generic etm part with trace capture")
Reviewed-on: https://review.openocd.org/c/openocd/+/7599
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Commit 07e1ebcc12 ("jtag: drivers: with pointers, use NULL
instead of 0") incorrectly inverts the check, making the driver's
pathmove operation not functional and triggering two clang errors.
Fix the check on malloc() returned pointer.
Change-Id: If1f220aca67452adbcd3a1c9cf691fc984b16b27
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 07e1ebcc12 ("jtag: drivers: with pointers, use NULL instead of 0")
Reviewed-on: https://review.openocd.org/c/openocd/+/7656
Tested-by: jenkins
When gatemate_set_instr() fails, the array pointed by
bit_file.raw_file.data is not freed.
Issue identified by OpenOCD Jenkins clang build.
Free the array while propagating the error.
Change-Id: I2f7fadee903f9c65cdc9ab9b52ccb5803b48a59d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 682f927f8e ("pld: add support for cologne chip gatemate fpgas")
Reviewed-on: https://review.openocd.org/c/openocd/+/7632
Tested-by: jenkins
Reviewed-by: Daniel Anselmi <danselmi@gmx.ch>
Let source file to include its file .h to validate the exported
prototypes.
Detected through 'sparse' tool.
Change-Id: I8ae2f8f1fdaea5683e157247463533b17237e464
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7602
Tested-by: jenkins
On 32 bit hosts, gcc should consider constants without suffix as
32 bits values.
Use the suffix 'ULL' to guarantee it is a 64 bit.
Detected through 'sparse' tool.
Change-Id: I205ca986968fef9a536f87492d1f6c80e41829f3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7601
Tested-by: jenkins
Antonio Borneo
Evgeniy Naydanov
Jacek Wuwer
Ian Thompson
Ahmed BOUDJELIDA
Tomas Vanek
Evgeniy Didin
Tarek BOCHKATI
Daniel Anselmi
David Vidrie Leon
Walter Ji
Marc Schink
Aleksey Shargalin
Henrik Nordström
Peter Collingbourne
Jeremy Herbert
Samuel Dewan
Karl Palsson
Kirill Radkin
Erhan Kurubas
Manuel Wick
Thiemo van Engelen
Tobias Diedrich
Marek Vrbka
EasyDevKits
Parshintsev Anatoly
Tim Newsome
Florian Fainelli
Artemiy Volkov
Ahmed Boughanmi
Vincent Fazio
Tarek BOCHKATI
Fedi Bouzazi
Daniel Goehring
Luca Hung
Brandon Pupp
Artur Rojek
Marcin Niestroj
Jason Peck
Nishanth Menon
Bruno Mendes
Nikolay Dimitrov
eolson
Laurent LEMELE
iosabi
Bohdan Tymkiv
Jan Matyas
Matthijs Kooijman
Amaury Pouly
Paul Fertser