The original document from Jedec does not report the entry for
"21 NXP (Philips)", replaced by "c". It's clearly a typo.
Keep the line from JEP106BF.01 for "NXP (Philips)".
Change-Id: I30215c4ff08d5f112305cde6ab7a3176cdcef948
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7727
Tested-by: jenkins
On Windows, isatty() can return any non-zero value if it's an interactive
device. Which diverges from the ARM semihosting specification. This patch
introduces a fix to make the SYS_ISTTY operation conform to spec.
Change-Id: I9bc4f3cb82370812825d52419851910b3e3f35cc
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7725
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
The old implementation of gdb socket error handling
in the gdb_get_char_inner() differs between Windows and *nix
platforms. This patch simplifies it by using an existing
function log_socket_error() which handles most of the platform
specific things. It also provides better error messages.
Change-Id: Iec871c4965b116dc7cfb03c3565bab66c8b41958
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7724
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Added debug prints to show what is the target debug reason. Also added
debug print for Ctrl-C response. This is useful for troubleshooting and
log analysis.
Change-Id: I055936257d989efe7255656198a8d73a367fcd15
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7720
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
This patch adds support for the NXP QN908x family of Bluetooth
microcontrollers, such as the QN9080. This chip features a Cortex-M4F
with 512 KiB of flash on all the available versions, although the
documentation suggests that there might be 256 kB versions as well.
The initial support allows to read, erase and write the whole user flash
area. Three new sub-commands under the new "qn908x" command are added
in this patch as well: disable_wdog to disabled the watchdog,
mass_erase to perform a mass erase and allow_brick to allow programming
images that disable the SWD interface.
Disabling the watchdog is required after a "reset halt" in order to run
the CRC algorithm from RAM when verifying the chip. However, this is not
done automatically on probing or other initialization since disabling
the watchdog might interfere with debugging real applications.
The "mass_erase" command allows to erase the whole flash without
probing it, since in some scenarios the chip can be locked such that no
flash or ram can be accessed from the SWD interface, allowing only to
run a mass_erase to be able to flash the program.
The flashing process allows to compute a checksum, similar to the
lpc2000 driver "calc_checksum" but done over a different region of the
memory. This checksum is required to be present for the QN908x
bootloader ROM to boot, and otherwise is useless. As with the lpc2000
design, verification when using "calc_checksum" is expected to fail if
the checksum was not valid in the image being verified.
This was manually tested on a QN9080, including the scan-view,
AddressSanitizer/UBSan and test coverage configurations.
Change-Id: Ibd6d8f3608654294795085fcaaffb448b77cc58b
Co-developed-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Signed-off-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Signed-off-by: iosabi <iosabi@protonmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/5584
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
These functions used to exist but don't anymore. (Pointed out in #863)
Change-Id: Iac6b5edd320bdff7628a788861e332f956dcd93d
Signed-off-by: Tim Newsome <tim@sifive.com>
Previously, progbuf execution did not flush or invalidate the register cache which could lead to incorrect behavior. This patch fixes it as well as refactors few sore points in the code related to it.
Change-Id: I353b931ca70a1828d4a9cc512aead00441730875
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Otherwise we may end up modifying DCSR of a different hart than
intended.
Change-Id: I39bde21a1444623ed150f2b3d504b9318b9d6191
Signed-off-by: Tim Newsome <tim@sifive.com>
This change implements the predefined type tap_state instead of generic
uint8_t in the driver
Change-Id: I3478e8d7b40b961f3ba77711179016cdcc35cd32
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7722
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
This change fixes endianness support in the driver.
Change-Id: Ida360bb58e988cea0a66fdc79e1610b528846fc4
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7721
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Clang reports that 3rd function call argument is an uninitialized value
file esp32_apptrace.c line:1270
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I73e254d4eb0c6b3152229717d8827d334784ab92
Reviewed-on: https://review.openocd.org/c/openocd/+/7719
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Clang is unable to fully track the content of the array
write_buffer[] and incorrectly complains that it could contain
some uninitialized value.
To help clang to track the execution flow, rewrite the handling of
the buffer by using simpler indexing and by moving away cmd_byte
from the first buffer's element to the variable cmd_byte.
While there:
- fix the error codes returned while parsing the command line and
- use directly command_print_sameline() instead of passing through
intermediate buffers.
Change-Id: I1969e896887ea3a4abebee057cc04c03005fa57c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7718
Tested-by: jenkins
Clang 15.0.7 complains about snprintf output truncation due to
output between 13 and 22 bytes into a destination of size 20.
Increase the size of the buffer.
Change-Id: I0369255ca1bc02a0cf494f765e91a608c960a0d6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7717
Tested-by: jenkins
Value in the 'dscsr' variable is garbage until the DAP queue is run.
Postpone evaluation of the 'secure_state' variable. Reading the
core registers in between will execute the DAP queue.
Change-Id: I44959e882dbafb1b9779e813c3d13f3b3dbcd47f
Signed-off-by: Bohdan Tymkiv <bohdan200@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7693
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The registers pauth_dmask and pauth_cmask are not accessible in
AARCH32 mode. Tagging them as 'hidden' is not enough and triggers
error:
Failed to read pauth_dmask register
while halting the core.
Tag the pauth registers as not existing, unless required by user.
Note: for non existing registers there should be no need to
allocate their register cache. Let's keep this for a further
improvement.
Change-Id: Iaa0d006a3d8ee611ee93333ed49a8615a6c94276
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: d0436b0cda ("armv8: Add support of pointer authentication")
Reviewed-on: https://review.openocd.org/c/openocd/+/7712
Tested-by: jenkins
Reviewed-by: Koudai Iwahori <koudai@google.com>
Register access on running target should fail if mstatus needs to be
modified.
Change-Id: Iec8e8d514ef2f5ca42606a5534cce55aaaa99180
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
- Manual integration of File-IO support from xt0.2 release
- Verified with applications linked using gdbio LSP
- No new clang static analysis warnings
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: Iedc5f885b2548097ef4f11ae1a675b5944f5fdf0
Reviewed-on: https://review.openocd.org/c/openocd/+/7550
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Removed an unused include from src/jtag/adapter.c.
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Change-Id: Ia5ea0acdfa1c011d7c88decd0f63e8032aafd699
Reviewed-on: https://review.openocd.org/c/openocd/+/7687
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The function is used for commands:
- jtag tapisenabled
- jtag tapenable
- jtag tapdisable
While there, add the missing .help and .usage fields and fix the
incorrect check in jtag_tap_enable() and jtag_tap_disable().
Change-Id: I0e1c9f0b8d9fbad19d09610a97498bec8003c27e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7554
Tested-by: jenkins
While there:
- fix memory leak in case of error on values tap->chip,
tap->tapname, tap->expected_ids;
- check for out of memory error;
- fix minor coding style issue;
- add the missing .usage field;
- remove functions not in use anymore.
Change-Id: I1c8c3ffeb324e9eacb919c7e0d94fd72122c9a81
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7431
Tested-by: jenkins
Change the prototype of functions:
- target_run_algorithm()
- target_wait_algorithm()
- target_wait_state()
- struct target_type::run_algorithm()
- struct target_type::wait_algorithm()
to use unsigned int for timeout_ms instead of int.
Change accordingly the variables passed as parameter.
Change-Id: I0b8d6e691bb3c749eeb2911dc5a86c38cc0cb65d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7562
Tested-by: jenkins
While there, add the missing .usage field and remove the now
unused function jim_target_tap_disabled().
Change-Id: I79afcc5097643fc264354c6c3957786a55f40498
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7561
Tested-by: jenkins
The function esp32_cmd_apptrace_generic() is not used outside the
file.
Declare it as static.
Detected through 'sparse' tool.
Change-Id: I08c6b92fb01594320bc3ae6b16067ac4eb51ca12
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7676
Tested-by: jenkins
This reverts commit 047b1a8fc2.
Commit 047b1a8fc2 ("target/image: zero-initialize ELF segments
up to p_memsz") breaks the backward compatibility introducing some
problem:
- an empty bss segment with paddr in SRAM gets zero filled at load
but does not survive after a reset, causing verify to fail;
- an empty bss segment with paddr in FLASH causes excessive flash
usage, which can exceed flash size (causing error) and makes
flash aging faster.
Revert it while looking for a better implementation.
Change-Id: Iaaf926dafce46a220a5bbe20c8576eb449996d76
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7658
Reviewed-by: Bohdan Tymkiv <bohdan200@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-by: Peter Collingbourne <pcc@google.com>
Tested-by: jenkins
This way if you connect to a running target, before it's hit a breakpoint,
then when it does hit the breakpoint OpenOCD will catch it.
Change-Id: I6f1e5f169fa385f46759015786e664693c3872e4
Signed-off-by: Tim Newsome <tim@sifive.com>
Poll failure just means poll failed. It's safer to assume the target is
still running, because then if it is running and subsequently halts we can
relay this to gdb correctly. We can't do the other way around, because once
gdb thinks the target has halted, it can't deal with it spontaneously
running.
Change-Id: Idb56137f1d6baa9afc1b0e55e4a48f407b8ebe83
Signed-off-by: Tim Newsome <tim@sifive.com>
When a DM was powered down, we end up in examine() again, and clearly if
the DM was powered down we need to invalidate that cache.
Change-Id: I5eb6a289939f313e06c09cac22245db083026aa3
Signed-off-by: Tim Newsome <tim@sifive.com>
The error state is sticky, so this has to be done to recover.
Change-Id: I589f3cdab0f2351fd25f89951830cbc16c39bd93
Signed-off-by: Tim Newsome <tim@sifive.com>
Trying to disable OTP write protection by running e.g. `flash protect
1 0 1 off` would already be rejected with an error code, but that would
result in a generic "failed setting protection for blocks 0 to 1"
message. Now a more specific error message is also printed, telling the
user why it failed.
Change-Id: I6d4974eb0bcd23a0a6cf68ff955d9e59b8b1b06a
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Reviewed-on: https://review.openocd.org/c/openocd/+/7615
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
When a DMI operation does not succeed (either because of a timeout
or an error), the specification says that the error in the `op`
field is sticky and needs to cleared by writing `dmireset` in `dtmcs`.
This is already done for timeouts in increase_dmi_busy_delay
but not for errors.
Change-Id: I7c5f27a5cf145511a1a8b64a45a586521e1cbe41
Signed-off-by: Amaury Pouly <amaury.pouly@lowrisc.org>
Reviewed-on: https://review.openocd.org/c/openocd/+/7688
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
this new STM32 series family introduces 2 devices:
STM32C011xx (0x443) and STM32C031xx (0x453)
both devices have 32 Kbytes single flash bank.
Change-Id: I4e890789e44e3b174c0e9c0e1068383ecdbb865f
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6874
Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The bcm2835gpio driver preferred /dev/gpiomem for access to
memory mapped GPIO control and used /dev/mem as a fallback
only if it couldn't open /dev/gpiomem.
/dev/mem usually requires elevated rights or specific capabilities
of the opening process, so the fallback failed anyway.
Although /dev/gpiomem is the strongly preferred option with respect
to security, there could be also use cases which require /dev/mem
even if /dev/gpiomem is available (e.g. changing the GPIO pad
settings is necessary or testing/debugging OpenOCD).
It was difficult to handle such cases because they required
to block globally the system device /dev/gpiomem
(remove, rename or chmod).
Drop the fallback feature and select the memory device
by 'bcm2835gpio peripheral_mem_dev' configuration command.
Use /dev/gpiomem as a default.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I60e427bda795d7a13d55d61443590dd31d694832
Reviewed-on: https://review.openocd.org/c/openocd/+/7350
Tested-by: jenkins
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Raspberry Pi 4 with 64-bit kernel and arm_peri_high=1 config.txt
parameter needs peripheral_base 0x47e000000, uint32_t is not enough.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Icedd084e2916657fa4478d452a5eb1e84a45c281
Reviewed-on: https://review.openocd.org/c/openocd/+/7685
Tested-by: jenkins
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The pads were configured at a wrong memory address
if /dev/gpiomem was mapped.
The pad setting registers are not accessible in mapped /dev/gpiomem,
disable the pads setting if the driver doesn't open /dev/mem.
While on it, do not fail the driver initialization if pad mapping fails
- just emit a warning and work with unchanged pad setting.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I0bce76cade8f7efd75efd9087a7d9ba6511a6239
Reviewed-on: https://review.openocd.org/c/openocd/+/7684
Tested-by: jenkins
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit introduces a new function, which can be used to reduce number
of register accesses.
Change-Id: I125809726eb7797b11121175c3ad66bedb66dd0d
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Since writing a register can make some GPRs dirty (e.g. S0, S1), registers
should be flushed in reverse order, so GPRs are flushed last.
Change-Id: Ice352a4df4ae064619c0f9905db634a7b57e4711
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Commit dd9137dc0e ("pld/virtex2: add missing error checks") adds
checks on the return value of several functions, allowing also
virtex2_read_stat() to propagate such returned values.
This triggers an error with clang, as it is now able to identify a
possible execution path that makes uninitialized the variable
status.
Check for the returned value of virtex2_read_stat() before using
the variable status and propagate the returned value.
While there, drop a useless empty string.
Change-Id: I7a23d3f904d4e07cdb6f6dfdf1179889b6b8afb8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7657
Reviewed-by: Daniel Anselmi <danselmi@gmx.ch>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The static analyser 'sparse' complains about using sizeof() on a
struct that has variable size:
src/rtos/uCOS-III.c:267:32: warning: using sizeof on a flexible structure
src/rtos/uCOS-III.c:269:41: warning: using sizeof on a flexible structure
src/rtos/uCOS-III.c:275:66: warning: using sizeof on a flexible structure
The struct ucos_iii_params contains either constants values for
different target type and variable fields. The last field is an
variable size array, always allocated to UCOS_III_MAX_THREADS
items. It's not practical to fix this size because we would get
too huge initialization in data segment.
Split away from struct ucos_iii_params all the variable fields and
put them in struct ucos_iii_private. Add in the new struct a
pointer to the selected element of ucos_iii_params_list[] and fix
the size of array threads[] to its maximum value; this would be
allocated at run-time, avoiding impacts to data segment.
Change-Id: I569011a257783d35a8795adbda06e942b4157f2a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7678
Tested-by: jenkins
The function rtos_thread_packet() is used across rtos and declared
locally as extern.
Move the prototype of the function in common include rtos.h
Change-Id: I50d311b583148a2de628de0997ef1afc9103a70e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7677
Tested-by: jenkins
The struct containing SWD and JTAG operations are declared as
extern in the C file.
Mode them in include file arm_adi_v5.h to silent 'sparse' error
for global variable definition without declaration in an include
file.
Change-Id: I59088512c052d5a120c38404a882ed512a68ca02
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7675
Tested-by: jenkins
The pointer nand_devices is used in two file.
Move the extern prototype in code.h
Detected through 'sparse' tool.
Change-Id: I7237359fd1a008770a624725cd0b3d8632b4166e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7674
Tested-by: jenkins
The internal variable 'gdb_actual_connections' is used by log and
by semihosting to determine if there are active GDB connections.
Keep the variable local in server's code and only export its value
through a dedicated function.
This solves the issue detected by 'parse' of the variable defined
as global but not declared in any include file.
Change-Id: I6e14f4cb1097787404094636f8a2a291340222dd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7673
Tested-by: jenkins
The function jtag_debug_state_machine_() is only used by a static
inline function and declared inside it as private.
The static analyser 'sparse' complains that the function is
defined as global but not cross checked against a prototype in an
include file.
Move the declaration outside the inline function so it get visible
by interface.c, which already includes interface.h
While there, change the argument type from 'unsigned' to 'unsigned
int' to pass checkpatch check.
Change-Id: Ia5dfb92dc4bc6d52ead4f0cb8c68319c83ff85b0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7672
Tested-by: jenkins
Let source file to include its file .h to validate the exported
prototypes.
Detected through 'sparse' tool.
Change-Id: I6197f21c857833dafc3d6e3b750c764bf4610abd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7671
Tested-by: jenkins
The static analyser 'sparse' complains about values bigger that
255 that gets cast-ed and/or stored in an 8 bit variable.
Rework the functions:
- h_u32_to_le()
- h_u32_to_be()
- h_u24_to_le()
- h_u24_to_be()
- h_u16_to_le()
- h_u16_to_be()
to avoid all the related warnings, without adding any functional
change. Any modern compiler should not be impacted by this.
Change-Id: I0b84043600a41c72d0e4ddb3dd195d69e3b2896b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7670
Tested-by: jenkins
The new committed files add some warning from the static analyser
'sparse':
- Don't assign pointer to 0, use NULL.
- switch with no cases.
Fix them.
Change-Id: I2c02d629bd80b71c8e42553be5d9388bb9b6bcd0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7668
Tested-by: jenkins
The static analyser 'sparse' complains that the functions
clear_malloc() and fill_malloc() are defined global but not cross
checked against a prototype in an include file.
Rework replacements.h and replacements.c to let the former be
included by the latter.
Change-Id: I536393a9c3718dcd7e144cde8f02e169f64c88e0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7667
Tested-by: jenkins
Don't use 'extern' in a C file, but declare the exported function
in a H file.
This helps validating the function prototype across declaration
and use.
Detected through 'sparse' tool.
Change-Id: I2c22b084fb513f4b3b1b1db96dfbc8fa4bfe7238
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7666
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a jtag
driver, that the struct adapter_driver is declared in the file as
non static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of adapter_driver's declaration in interface.h
Drop the preprocessor #ifdef/#endif around the declaration, as it
has no effect when the declaration is not used and/or the symbol
does not exist.
Change-Id: I5b8f5fe48a89ff0ffce38d547c551cd196379fbf
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7665
Tested-by: jenkins
Let source files to include its file .h to validate the exported
prototypes.
Detected through 'sparse' tool.
Change-Id: I217c2903fdb19e1a2cce39d2536a903c3d72f3f7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7664
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a pld
driver, that the struct pld_driver is declared in the file as
non static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of pld_driver's declaration in pld.h
Change-Id: I0f917aecc7534c1b51af0afa9b32ccfd33db3511
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7663
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a nor
driver, that the struct flash_driver is declared in the file as
non static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of flash_driver's declaration in driver.h
Fix some incorrect non-const declaration and remove redundant
forward declarations.
Change-Id: I5e41d094307aac4a57dfa9a70496ff3cf180bd92
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7662
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a nand
driver, that the struct nand_flash_controller is declared in the
file as non static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of nand_flash_controller's declaration in driver.h
While there, drop the unused/commented boundary scan controller.
Change-Id: I7dc32cef55be13ba537abe0f4c47b135d837126c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7661
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a rtos'
file, that the struct rtos_type is declared in the file as non
static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of rtos_type's declaration in rtos.h
Change-Id: Ia96dff077407a6653b11920519c1724e4c1167a3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7660
Tested-by: jenkins
The static analyser 'sparse' complains, while compiling a target's
file, that the struct target_type is declared in the file as non
static, but it is not exposed through an include file.
The message is:
warning: symbol 'XXX' was not declared. Should it be static?
Move the list of target_type's declaration in target_type.h
While there, fix a name clash in stm8.c
Change-Id: Ia9c681e0825cfd04d509616dbc04a0cf4944f379
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7659
Tested-by: jenkins
In case in the future I have the same idea of optimizing progbuf writes
again.
Change-Id: Ie383487691cceeff75e2c22f4c85fc1fe4873937
Signed-off-by: Tim Newsome <tim@sifive.com>
Small cleanup in target.c to get rid of few upstream differences:
- removed a pointless check for `reg->exists` - already checked
few lines above
- unify one log message with what's in upstream
Change-Id: I3fd761157382670611fa90de84e2dfc90192f473
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Non-functional change: unused function removed that does not exist
in the OpenOCD upstream, either.
Change-Id: Ibeab5b41a24183673cc02ca919b2f7285309e6f4
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
To perform any meaningful manipulations with DR the corresponding IR should
be set to a relevant instruction, not BYPASS, so warn the user accordingly.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Change-Id: I42580ecd75ae824a4145f6f17f0df9bcf825b50f
Reviewed-on: https://review.openocd.org/c/openocd/+/7654
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
It's customary to use [] brackets to mean the argument is optional, but
drscan requires at least one pair of "num_bits value" so change it to ().
In common regular expressions * means 0 or more, and + means 1 or more,
so change that too.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Change-Id: Ib15d833bda2aa398ad1345a042f97d91c98dbf66
Reviewed-on: https://review.openocd.org/c/openocd/+/7653
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
While there, add the missing .usage field and move in target.c the
enum nvp_assert.
Change-Id: Ia4f2f962887b5a35faeaa4eae128fa2865569b24
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7559
Tested-by: jenkins
Reorganize the code to parse the command line only once.
Add check for successful memory allocation.
Change-Id: Ibf6068e177c09e93150d11aecfcf079348c47c21
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7555
Tested-by: jenkins
For some trivial case only, replace calls to jim-nvp with calls
to the new OpenOCD nvp.
Change-Id: Ifd9aff32b67748af8ab808e6a6b6e64f5271b888
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7553
Tested-by: jenkins
New gcc does not understand that the variable 'restore_ms' is set
to 'true' only when the variable 'ms' is assigned in
static int xtensa_write_dirty_registers(...)
{
xtensa_reg_val_t ms;
bool restore_ms = false;
...
if (...) {
ms = regval;
restore_ms = true;
...
}
...
if (restore_ms) {
USE(ms);
}
...
}
and complains about possible use of uninitialized variable 'ms'.
Sadly initialize 'ms' to zero to hide this false positive.
Change-Id: I1fb3949070c8abbf4aa45a740f0ca2fdb753d4fa
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7681
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-by: Ian Thompson <ianst@cadence.com>
Tested-by: jenkins
Current code tests a function pointer against a numeric value that
is the same enum type as returned by the pointed function.
Clearly the author was willing to call the function and check its
returned value.
Fix the check by calling the function.
Detected through 'sparse' tool.
Change-Id: I27d18d26c2c797160a397daa32835c199014b70b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Checkpatch-ignore: GIT_COMMIT_ID
Fixes: 237e894805 ("reworked etm/etb into a generic etm part with trace capture")
Reviewed-on: https://review.openocd.org/c/openocd/+/7599
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Commit 07e1ebcc12 ("jtag: drivers: with pointers, use NULL
instead of 0") incorrectly inverts the check, making the driver's
pathmove operation not functional and triggering two clang errors.
Fix the check on malloc() returned pointer.
Change-Id: If1f220aca67452adbcd3a1c9cf691fc984b16b27
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 07e1ebcc12 ("jtag: drivers: with pointers, use NULL instead of 0")
Reviewed-on: https://review.openocd.org/c/openocd/+/7656
Tested-by: jenkins
When gatemate_set_instr() fails, the array pointed by
bit_file.raw_file.data is not freed.
Issue identified by OpenOCD Jenkins clang build.
Free the array while propagating the error.
Change-Id: I2f7fadee903f9c65cdc9ab9b52ccb5803b48a59d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 682f927f8e ("pld: add support for cologne chip gatemate fpgas")
Reviewed-on: https://review.openocd.org/c/openocd/+/7632
Tested-by: jenkins
Reviewed-by: Daniel Anselmi <danselmi@gmx.ch>
Let source file to include its file .h to validate the exported
prototypes.
Detected through 'sparse' tool.
Change-Id: I8ae2f8f1fdaea5683e157247463533b17237e464
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7602
Tested-by: jenkins
On 32 bit hosts, gcc should consider constants without suffix as
32 bits values.
Use the suffix 'ULL' to guarantee it is a 64 bit.
Detected through 'sparse' tool.
Change-Id: I205ca986968fef9a536f87492d1f6c80e41829f3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7601
Tested-by: jenkins
Don't compare pointers with 0, use NULL when needed.
Don't assign pointer to 0, use NULL.
Detected through 'sparse' tool.
Change-Id: Ifa81ba961c0d490cc74880b4a46b620e6358f779
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7598
Tested-by: jenkins
Don't compare pointers with 0, use NULL when needed.
Don't assign pointer to 0, use NULL.
Don't pass 0 ad pointer argument, pass NULL.
Detected through 'sparse' tool.
Change-Id: I3f867cb9c0903f6e396311e7b3970ee5fb3a4231
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7597
Tested-by: jenkins
Let source file to include its file .h to validate the exported
prototypes.
Detected through 'sparse' tool.
Change-Id: I5de107b4f8a468f0e37f06171f5f0c3c0546db1a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7596
Tested-by: jenkins
Add static type to symbols that are not used elsewhere.
Detected through 'sparse' tool.
Change-Id: I2bdac5d2b06a6dbed5c27bfdb1cf36eee90ad823
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7594
Tested-by: jenkins
On 32 bit hosts, gcc should consider constants without suffix as
32 bits values. Adding a cast to convert it to 64 bits should not
be enough.
Use the suffix 'ULL' to guarantee it is a 64 bit.
Detected through 'sparse' tool.
Change-Id: If6be35bd3cbbc7c3a83e0da1407e611f07ff6e06
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7593
Tested-by: jenkins
Don't compare pointers with 0, use NULL when needed.
Don't assign pointer to 0, use NULL.
Don't pass 0 ad pointer argument, pass NULL.
While there, check for return value from malloc(), replace an
assert() with a LOG_ERROR(), drop a useless cast.
Detected through 'sparse' tool.
Change-Id: Ia7cf52221b12198aba1a07ebdfaf57ce341d5699
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7592
Tested-by: jenkins
Add static type to symbols that are not used elsewhere.
Detected through 'sparse' tool.
Change-Id: I00e151d2466868a5dce028444d326defb80d4826
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7591
Tested-by: jenkins
It looks like a false positive.
Scan-build considers as possible to:
- have list_empty() return false;
- list_for_each_safe() to not execute any loop, thus not assigning
a non-NULL value to 'block';
- the NULL pointer 'block' is passed to list_del().
This is not possible because with list_empty(), the loop runs at
least once.
Rewrite the function to simplify the code and making it easier for
scan-build to check it.
This also drops an incorrect use of list_for_each_safe(), where
the 'safe' version was not required.
Change-Id: Ia8b1d221cf9df73db1196e3f51986023dcaf78eb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 8d1dcf293a ("target/espressif: add application tracing functionality over JTAG")
Reviewed-on: https://review.openocd.org/c/openocd/+/7608
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Tested-by: jenkins
When the function xtensa_queue_dbg_reg_read() returns error, the
array 'tmp' remains not initialized and scan-build complains while
computing buf_get_u32() that:
Result of operation is garbage or undefined
Check the returned value of xtensa_queue_dbg_reg_read() and
propagate it.
Change-Id: If0aaad068b97ef0a76560e262d16429afd469585
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 8d1dcf293a ("target/espressif: add application tracing functionality over JTAG")
Reviewed-on: https://review.openocd.org/c/openocd/+/7607
Tested-by: jenkins
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Below warnings are fixed.
1- A function declaration without a prototype is deprecated in all
versions of C [-Werror,-Wstrict-prototypes]
2- error: variable set but not used [-Werror,-Wunused-but-set-variable]
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I1cf14b8e5e3e732ebc9cacc4b1cb9009276a8ea9
Reviewed-on: https://review.openocd.org/c/openocd/+/7569
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
ARMv8-R platforms are similar to ARMv8-A regarding
JTAG and most cpu registers. ARMv8-R doesn't has MMU
but has MPU instead.
ARMv8-R platforms can be AArch32 only such as Cortex-R52,
or AArch64 capable like Cortex-R82.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Change-Id: Ib086f71685d1e3704b396d478ae9399dd8a391e1
Reviewed-on: https://review.openocd.org/c/openocd/+/6843
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Linux kernel and user space border is 0xc0000000 not 0xc000000
Signed-off-by: panciyan <panciyan@eswincomputing.com>
Change-Id: I6b487cce62ac31737deca97d5f5f7bbc081280f4
Reviewed-on: https://review.openocd.org/c/openocd/+/7570
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This feature allows to transfer arbitrary data between host and
ESP32 via JTAG.
The main use cases:
1- Collecting application specific data
2- Lightweight logging to the host
3- System behaviour analysis with SEGGER SystemView
4- Source code coverage
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I95dee00ac22891fa326915a3fcac3c088cbb2afc
Reviewed-on: https://review.openocd.org/c/openocd/+/7163
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
If hart can't change pc (e.g. it is running), resume command should
fail.
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: I14627366d574d806ea16262b7d305d8161f8bcc2
On MacOS libc includes files from MacOSX.sdk that define the macro
#define __nonnull
without arguments, causing compile error.
Extend the existing check for clang on MacOS and undefine the
macro for gcc too.
Change-Id: Ic99de78348c6aa86561212a3aded9342e5d32e02
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7571
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Tested-by: jenkins
Minor changes due to kernel switch to 100 char/line.
Added four new functions.
Silent checkpatch; we don't want to diverge from Linux reference
code.
Checkpatch-ignore: MACRO_ARG_REUSE, UNNECESSARY_PARENTHESES
Checkpatch-ignore: MACRO_ARG_PRECEDENCE
Change-Id: I1d2ff25bf3bab8cd0f5c9be55c7501795490ea75
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7568
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The file list.h is taken from Linux and includes two similar
implementation of double linked lists:
- with single linked list's head (hlist_*), and
- with double linked list's head (list_*).
While the former offers a minor memory footprint improvement,
keeping two implementations makes harder for newbie developers
to approach them.
So far only the latter implementation has been used and no new
patches in gerrit is going to change that.
Drop the support for lists with single linked head.
It can be easily taken back from git history, if needed.
Change-Id: I420e5de38ab755fdfbeb2115538c61818308ec2b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7567
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Add the fast read method to speed up flash verification
after programming. Works the same as fast write already
implemented.
Signed-off-by: François LEGAL <devel@thom.fr.eu.org>
Change-Id: I74611a3542a88212f0483ec8ee368aba3d1f03c7
Reviewed-on: https://review.openocd.org/c/openocd/+/7564
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The condition to check if the workspace area (used by actual MIPS code
executed on target) and data area (sandbox to put data to be read/written
to/from flash) is wrong, thus preventing the use of FAST_* commands to
program/verify FLASH.
Signed-off-by: François LEGAL <devel@thom.fr.eu.org>
Change-Id: Ic68424b7f42d44e550433a120093db5e7980fd56
Reviewed-on: https://review.openocd.org/c/openocd/+/7563
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
1.
update the rtos->thread_count in time, to make sure the allocated
thread_name_str and extra_info_str could be freed by
rtos_free_threadlist(). Otherwise the abnormal return may cause a
memory leak.
2.
remove a redundant assignment to threadid.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Change-Id: Ifabc59d501c925b3d6aec8b04b2856d2c31cc4e2
Reviewed-on: https://review.openocd.org/c/openocd/+/7549
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Since the deletion of `-rtos hwthread`, there is no need to treat harts
with `-rtos` specified differently on reset.
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: I88a9129936b5172bb7479dfa1255e29ff460c054
No other attempt is made at doing anything hypervisor-specific. Are
other things necessary?
Change-Id: Ib65f114888840cf0878f9bfe028c9a42b436aa3f
Signed-off-by: Tim Newsome <tim@sifive.com>
If the file read abnormally, need to close it which was opened before.
Signed-off-by: panciyan <panciyan@eswincomputing.com>
Change-Id: I6142f154741dcd38088b7add2793219ee4dd2ae9
Reviewed-on: https://review.openocd.org/c/openocd/+/7546
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
This also fixes an incorrect return ERROR_xx from a jim command,
propagated from return value of rtos_smp_init().
Change-Id: Icf4893c00aabd8fadd60077c5e8a2e926f687518
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7511
Tested-by: jenkins
Print one entry per line.
While there add the mandatory 'usage' field.
Change-Id: Ia832684817f3bdbfa4cb943cd97e3f9fb2605902
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7510
Tested-by: jenkins
Print one entry per line.
While there add the mandatory 'usage' field.
Change-Id: I135556e12154e33fdbd0f71d89f6fe37c69813b7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7509
Tested-by: jenkins
While there add the mandatory 'usage' field.
Change-Id: I3e5b826ca58f7ade30a443ada0cb4a9cd9ea35c2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7508
Tested-by: jenkins
While there add the mandatory 'usage' field.
Change-Id: I5389881dac25877dc32930ec36ee546e48ecc14d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7507
Tested-by: jenkins
While there, fix typo on 'exceeds'.
In a following patch, the output could be formatted and split in N
values per line to make it easier to read by humans.
Change-Id: I295111a80934393011e46311f6cf6c13f2bdc0a3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7503
Tested-by: jenkins
While there, format in a human readable way the output list by
using one line per tpiu name.
Change-Id: I937c92b6c1e92509cf8aa96be1517a51bc363600
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7501
Tested-by: jenkins
While there, format in a human readable way the output list by
using one line per dap name.
Change-Id: I24a47350105b90db15808c61790f05d807120739
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7498
Tested-by: jenkins
While there:
- check the number of command parameters;
- add the mandatory 'usage' field.
Change-Id: I7cd16f049753caedf19f313f7dc84be98efdba42
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7497
Tested-by: jenkins
While there add the mandatory 'usage' field.
Change-Id: I316fb31e24e94985dcc724e428b0384be7ef5bdd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7496
Tested-by: jenkins
While there add the mandatory 'usage' field.
Change-Id: I3491ed79d11c5a3e81cc9afd2423da14b8df72ff
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7495
Tested-by: jenkins
While there:
- format in a human readable way the output list by using one line
per tap name;
- add the mandatory 'usage' field.
Change-Id: I295449220c78fac8973478b265413342ea832f61
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7494
Tested-by: jenkins
While there, format in a human readable way the output list by
using one line per cti name.
Change-Id: I6d4870ee512fe7e6935d73355c2377ad805ccc3b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7492
Tested-by: jenkins
While there, add a check for target halted and check the number of
parameters accordingly to the command name.
Change-Id: I9e8bb109c35039561997d14782fac682267aee65
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7491
Tested-by: jenkins
This also fixes an incorrect return ERROR_TARGET_NOT_HALTED from a
jim command.
Change-Id: I99a02a21bedb64e60944e295c7cf24356e07be60
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7490
Tested-by: jenkins
This also fixes a mistake of the jim command returning ERROR_xx
when function rtt_read_channel_info() returns error.
While there:
- format in a human readable way the output dictionary list, while
preserving the structure of its TCL data;
- add check for the number of parameters.
Change-Id: Ica2b623699d3a606d3992975c836dae96f74b26d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7489
Tested-by: jenkins
Use full 64 bits in output; no reason to truncate at 32 bits.
Change-Id: I433815a381e147731ff0da2c805170649a9bcf38
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7487
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
The mixed use of jim commands and OpenOCD commands is error prone
due to handling of errors through JIM_xx and ERROR_yy.
Rewrite the jim command 'flash list' as OpenOCD command.
While there:
- format in a human readable way the output dictionary list, while
preserving the structure of its TCL data;
- add the mandatory 'usage' field.
Change-Id: I1ee69870d3ab3c1cfc46cd2b8ec03de6b2300bd6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7486
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
The mixed use of jim commands and OpenOCD commands is error prone
due to handling of errors through JIM_xx and ERROR_yy.
Rewrite the jim command 'transport select' as OpenOCD command.
This fixes and incorrect check for the return value of function
transport_select(); it returns ERROR_yy but the check is on JIM_xx.
While there, fix the coding style.
Change-Id: I9f3e8394c1a0cc0312b414c58275e1220217bbed
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7485
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
The mixed use of jim commands and OpenOCD commands is error prone
due to handling of errors through JIM_xx and ERROR_yy.
Rewrite the jim command 'ocd_find' as OpenOCD command.
Change-Id: Id775bccc12840bcf95d8c19787beda5e7c3107fc
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7484
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
The command 'svf' is the only command in OpenOCD that accepts
options in both forms 'option' and '-option'.
Deprecate the option format without the leading '-'.
Update the documentation and fix the on-line help.
While there:
- switch to use the new nvp.h helper;
- return ERROR_COMMAND_ARGUMENT_INVALID on invalid command args;
- fix some minor coding style rule.
Change-Id: I5b944403d92a3fa1e12d5faafc1d2a139bc16a7d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7534
Tested-by: jenkins
If svf_set_padding() returns error, jump to free_all label to
prevent any memory leak.
Propagate the error reported by svf_set_padding() instead of
overwriting it.
Use command_print() instead of LOG_ERROR() for command output.
Change-Id: I61fd89cad10652f2f9ef1f9d48a040e35253c3d4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7533
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The file descriptor svf_fd is not closed on command error, thus
leaking memory.
Close svf_fd on errors.
While there, properly initialize svf_fd using NULL instead of 0.
Change-Id: I5efe9ce576a3a50588b30000222665e26161dfdc
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7532
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: <kai.schmitz@advantest.com>
The code for JTAG WAIT recovery did not handle DP_SELECT
endianness.
While on it, mark missing ADIv6 DP SELECT1 handling as TODO.
Change-Id: I44f3bc8fc9fd2483c0293b6d4f2c51a60ca01873
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7540
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The multidrop SWD is also supported.
Change-Id: I9fefc54fc9d40a75194285cd6e0f10c5c347d9b6
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7537
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The value returned by target_get_gdb_arch() is something specific for GDB.
There could be several variants of the same CPU.
If we start implementing all the variants, checking the string value,
could become incorrect.
It's better to check for xtensa->common_magic == XTENSA_COMMON_MAGIC
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I20f3fdced176c3b9ab00f889743161ecad7280f9
Reviewed-on: https://review.openocd.org/c/openocd/+/7536
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Almost written from the beginning in a modern OpenOCD way.
- Endiannes support
- Proper variable types
- Align with the other rtos implementations
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I0868a22da2ed2ab664c82b17c171dc59ede78d10
Reviewed-on: https://review.openocd.org/c/openocd/+/7444
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Icount triggers don't have a maskmax field at all. This is a cut and
paste error.
Change-Id: I001b3d41bf683599706dba713f7be475e8dd1668
Signed-off-by: Tim Newsome <tim@sifive.com>
When permission bits R, W, and X in PTE all three are zero,
the PTE is a pointter to the next level of the page table;
otherwise, it is a leaf PTE. Here PTE_W is missed.
Change-Id: I82a4cc4e64280f0fcad75b20e51b617520aff29b
Signed-off-by: panciyan <panciyan@eswincomputing.com>
-noreset: when using several SVF input files in a sequence it is not always
desireable to have a JTAG reset between the execution of the files.
The -noreset option skips this unwanted reset.
-addcycles <x>: some tests rely on a certain number of extra clock cycles
between the actual JTAG commands. The -addcycles option injects a number
x cycles after each SDR instruction.
Signed-off-by: Kai Schmitz <kai.schmitz@advantest.com>
Change-Id: I31932d6041dbc803be00016cd0a4f23fb2e7dbe1
Reviewed-on: https://review.openocd.org/c/openocd/+/7433
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The macro JIM_EMBEDDED was required to be defined before including
jim.h in applications that embed jimtcl.
This requirement has been dropped in 2010 by removing the file
dos/Embedder-HOWTO.txt from jimtcl in
https://github.com/msteveb/jimtcl/commit/2d8564100c86#diff-3e93fa55e666
Drop the macro definition and the comment that mandates it.
Change-Id: I36883f60f25bb25839e4ebf908159569659764dd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7518
Tested-by: jenkins
Not all compilers nor compiler versions supports the attributes
used in OpenOCD code.
Collect in a single file the workaround to handle them.
Change-Id: I92d871337281169134ce8e40b2064591518be71f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7519
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
- Manual integration of NX support from xt0.2 release
- No new clang static analysis warnings
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I95b51ccc83e56c0d4dbf09e01969ed6a4a93d497
Reviewed-on: https://review.openocd.org/c/openocd/+/7356
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
We were previously not zero-initializing ELF segments between p_filesz
and p_memsz (aka BSS). However, this may be necessary depending on the
user's application. Therefore, start doing so.
Change-Id: I5a743390069583aca7ee276f53afeccf2cac0855
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7513
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
All DIDs are taken from "SAM R34/R35 Errata Sheet" (DS80000834A).
Signed-off-by: Andrew Lalaev <andrey.lalaev@gmail.com>
Change-Id: Ie35f58e61bb02919c0676c91938c90192481d995
Reviewed-on: https://review.openocd.org/c/openocd/+/7521
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
According to the datasheets these MCUs have 40Kb RAM.
Signed-off-by: Andrew Lalaev <andrey.lalaev@gmail.com>
Change-Id: I52b8a0c86035bccd6f3c1a478bb2e558bca4ae86
Reviewed-on: https://review.openocd.org/c/openocd/+/7520
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The driver tries to open mpsse engine for each vid pid
pair in sequence. If more vid/pid pairs are configured and
the USB device does not correspond to the first pair,
the driver shows 'unable to open ftdi device ...' error.
Match vid pid with the whole list as used in jtag_libusb_open()
instead of multiple mpsse_open() in for loop over vid/pid pairs.
Change-Id: I8ef55205be221c727607fe25b81ae21de0d96f02
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7529
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Can be employed by a driver with custom libusb open.
Change-Id: I00c8a01df8780891a8b7c30e2e34ab191acdf9a8
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7528
Tested-by: jenkins
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo
Marek Vrbka
iosabi
Tim Newsome
Jacek Wuwer
Erhan Kurubas
Bohdan Tymkiv
Evgeniy Naydanov
Daniel Anselmi
Ian Thompson
Jan Matyas
Matthijs Kooijman
Amaury Pouly
Tarek BOCHKATI
Tomas Vanek
Paul Fertser
Julien Massot
Parshintsev Anatoly
panciyan
Mark Zhuang
François LEGAL
Chao Du
Kai Schmitz
Peter Collingbourne
Andrew Lalaev