Keith Rothman
4c82ddf394
Add -params mode to force undef parameters in selected cells.
...
Signed-off-by: Keith Rothman <537074+litghost@users.noreply.github.com>
2019-02-21 10:16:38 -08:00
Clifford Wolf
b5f6e786ea
Switch "bugpoint" from system() to run_command()
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2019-01-07 09:45:21 +01:00
whitequark
a342d6db49
bugpoint: new pass.
...
A typical use of `bugpoint` would involve a script with a pass under
test, e.g.:
flowmap -relax -optarea 100
and would be invoked as:
bugpoint -yosys ./yosys -script flowmap.ys -clean -cells
This replaces the current design with the minimal design that still
crashes the `flowmap.ys` script.
`bugpoint` can also be used to perform generic design minimization
using `select`, e.g. the following script:
select i:* %x t:$_MUX_ %i -assert-max 0
would remove all parts of the design except for an unbroken path from
an input to an output port that goes through exactly one $_MUX_ cell.
(The condition is inverted.)
2019-01-07 03:13:19 +00:00
Scott Mansell
62c90c4e17
Rename cells based on the wires they drive.
2019-01-06 19:00:16 +13:00
whitequark
efa278e232
Fix typographical and grammatical errors and inconsistencies.
...
The initial list of hits was generated with the codespell command
below, and each hit was evaluated and fixed manually while taking
context into consideration.
DIRS="kernel/ frontends/ backends/ passes/ techlibs/"
DIRS="${DIRS} libs/ezsat/ libs/subcircuit"
codespell $DIRS -S *.o -L upto,iff,thru,synopsys,uint
More hits were found by looking through comments and strings manually.
2019-01-02 13:12:17 +00:00
Clifford Wolf
ddff75b60a
Merge pull request #736 from whitequark/select_assert_list
...
select: print selection if a -assert-* flag causes an error
2018-12-16 16:45:49 +01:00
whitequark
f6412d7109
select: print selection if a -assert-* flag causes an error.
2018-12-16 15:44:29 +00:00
whitequark
a9baee4b24
rename: add -src, for inferring names from source locations.
2018-12-05 20:35:13 +00:00
Clifford Wolf
592a82c0ad
Merge pull request #625 from aman-goel/master
...
Minor revision to -expose in setundef pass
2018-09-14 12:36:13 +02:00
Aman Goel
75c1f8d241
Minor revision to -expose in setundef pass
...
Adds default value option as -undef when -expose used. Not having set the value mode set can cause the setundef pass to abort.
2018-09-10 21:44:36 -04:00
Benedikt Tutzer
95d65971f3
added some checks if python is enabled to make sure everything compiles if python is disabled in the makefile
2018-08-20 16:04:43 +02:00
Benedikt Tutzer
d87c7df27f
Two passes are not allowed to have the same filename
2018-08-20 15:28:09 +02:00
Benedikt Tutzer
6d18837d62
Python passes are now looked for in share/plugins and can be added by specifying a relative or absolute path
2018-08-20 15:11:06 +02:00
Clifford Wolf
05466790a6
Merge pull request #606 from cr1901/show-win
...
`show` pass `-format` and `-viewer` improvements on Windows
2018-08-19 15:25:46 +02:00
Aman Goel
83b41260f6
Revision to expose option in setundef pass
...
Corrects indentation
Simplifications and corrections
2018-08-18 09:08:07 +05:30
Aman Goel
61f002c908
Merge pull request #3 from YosysHQ/master
...
Updates from official repo
2018-08-18 08:18:40 +05:30
Benedikt Tutzer
d79a2808cf
Python Passes can now be added with the -m option or with the plugin command. There are still issues when run in shell mode, but they can be used just fine in a python script
2018-08-16 16:00:11 +02:00
William D. Jones
7ce7ea2eb4
Update show pass documentation with Windows caveats.
2018-08-15 17:18:19 -04:00
William D. Jones
9f91c62348
Fix run_command() when using -format and -viewer in show pass.
2018-08-15 17:18:19 -04:00
Henner Zeller
3aa4484a3c
Consistent use of 'override' for virtual methods in derived classes.
...
o Not all derived methods were marked 'override', but it is a great
feature of C++11 that we should make use of.
o While at it: touched header files got a -*- c++ -*- for emacs to
provide support for that language.
o use YS_OVERRIDE for all override keywords (though we should probably
use the plain keyword going forward now that C++11 is established)
2018-07-20 23:51:06 -07:00
Aman Goel
4d343fc1cd
Merging with official repo
2018-07-04 15:14:28 -04:00
Edmond Cote
d89560a0ba
Include module name for area summary stats
...
The PR prints the name of the module when displaying the final area count.
Pros:
- Easier for the user to `grep` for area information about a specific module
Cons:
- Arguably more verbose, less "pretty" than author desires
Verification:
~~~~
30c30
< Chip area for this module: 20616.349000
---
> Chip area for module '$paramod$d1738fc0bb353d517bc2caf8fef2abb20bced034\picorv32': 20616.349000
70c70
< Chip area for this module: 88.697700
---
> Chip area for module '\picorv32_axi_adapter': 88.697700
102c102
< Chip area for this module: 20705.046700
---
> Chip area for top module '\picorv32_axi': 20705.046700
~~~~
2018-06-18 17:29:01 -07:00
Clifford Wolf
f273291dfe
Add setundef -anyseq / -anyconst support to -undriven mode
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-06-01 11:57:28 +02:00
Clifford Wolf
4cd6d5556a
Add "setundef -anyconst"
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-06-01 11:49:58 +02:00
Aman Goel
6e63df6dd0
Correction to -expose with setundef
2018-05-15 13:06:23 -04:00
Aman Goel
8b9a8c7f91
Minor correction
...
Minor typo error correction in -expose with setundef
2018-05-14 18:58:49 -04:00
Aman Goel
b4a303a1b7
Corrections to option -expose in setundef pass
2018-05-13 20:13:54 -04:00
Aman Goel
9286acb687
Add option -expose to setundef pass
...
Option -expose converts undriven wires to inputs.
Example usage: setundef -undriven -expose [selection]
2018-05-13 16:53:35 -04:00
Clifford Wolf
0fad1570b5
Some cleanups in setundef.cc
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-05-13 16:36:12 +02:00
Christian Krämer
c1ecb1b2f1
Add "#ifdef __FreeBSD__"
...
(Re-commit e3575a8
with corrected author field)
2018-05-13 13:08:26 +02:00
Clifford Wolf
1167538d26
Revert "Add "#ifdef __FreeBSD__""
...
This reverts commit e3575a86c5
.
2018-05-13 13:06:36 +02:00
Johnny Sorocil
e3575a86c5
Add "#ifdef __FreeBSD__"
2018-05-05 13:02:44 +02:00
Clifford Wolf
83ffb23739
Add "setundef -undef"
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-03-12 13:52:35 +01:00
Clifford Wolf
61a9e2eeb3
Fix connwrappers help message
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-03-04 22:54:34 +01:00
Clifford Wolf
717abc93a8
Recognize stand-alone obj pattern even when it contains a slash
2018-02-13 14:55:24 +01:00
Clifford Wolf
a96c775a73
Add support for "yosys -E"
...
Signed-off-by: Clifford Wolf <clifford@clifford.at>
2018-01-07 16:36:13 +01:00
Clifford Wolf
9ae25039fb
Add support for editline as replacement for readline
2017-11-08 02:55:00 +01:00
Clifford Wolf
4f31cb6dad
Add "ltp" command
2017-10-31 12:40:25 +01:00
Clifford Wolf
3f22f48eeb
Add blackbox command
2017-10-04 18:30:42 +02:00
Clifford Wolf
d38a64b1cf
More intuitive handling of "cd .." for singleton modules
2017-08-19 00:15:12 +02:00
Clifford Wolf
c00d8a5b73
Add $alu to list of supported cells for "stat -width"
2017-07-14 11:32:49 +02:00
Clifford Wolf
0f217080cf
Add "design -import"
2017-06-30 19:18:52 +02:00
Clifford Wolf
8952bd6f45
Add chtype command
2017-06-30 17:57:34 +02:00
Clifford Wolf
05df3dbee4
Add "setundef -anyseq"
2017-05-28 11:59:05 +02:00
Clifford Wolf
9ed4c9d710
Improve write_aiger handling of unconnected nets and constants
2017-05-28 11:31:35 +02:00
Clifford Wolf
dee4ec1661
Fix gcc compiler warning
2017-04-05 11:21:06 +02:00
Clifford Wolf
1a6c02a532
Add "chformal -assert2assume" and friends
2017-02-28 00:00:44 +01:00
Clifford Wolf
db7fc0e32d
Add "chformal" pass
2017-02-27 13:25:28 +01:00
Clifford Wolf
0cac95ea94
Added "check -initdrv"
2017-01-04 18:12:41 +01:00
Clifford Wolf
b1cdf772eb
Added "design -reset-vlog"
2016-11-30 11:25:55 +01:00
Clifford Wolf
e444e59963
Added wire start_offset and upto handling to splitnets cmd
2016-11-23 13:54:33 +01:00
Clifford Wolf
97ac77513f
Bugfix in "setundef" pass
2016-11-08 18:53:36 +01:00
Clifford Wolf
ef603c6fe1
Implemented "scc -set_attr"
2016-11-06 00:04:10 +01:00
Clifford Wolf
914aa8a5d3
Bugfix in "scc" command
2016-11-06 00:03:35 +01:00
Clifford Wolf
3655d7fea7
Added "setparam -type"
2016-10-19 13:54:04 +02:00
Clifford Wolf
f3f5a02045
Added "tee +INT -INT"
2016-09-06 17:43:24 +02:00
Clifford Wolf
66582964bc
Improved "show" help message
2016-08-28 12:34:36 +02:00
Clifford Wolf
321e15b0bf
Minor fixes in show command
2016-08-16 00:36:24 +02:00
Clifford Wolf
6ed6b3cb6d
Replaced "select -assert-limit" with -assert-max and -assert-min
2016-07-01 12:24:13 +02:00
eshellko
9a742f4069
Added 'assert-limit' option for 'select' command
...
For resource limited designs such as FPGA it can be useful to specify limit of specific resources available on board. So user can check if he should change RTL as early as mapping done.
2016-07-01 10:24:22 +04:00
Clifford Wolf
dcf576641b
Added "setundef -init"
2016-06-03 11:38:31 +02:00
Clifford Wolf
611f121cb9
Fixed "scc" for cells that have feedback singals _and_ are part of a larger loop
2016-05-27 16:33:13 +02:00
Clifford Wolf
e01464e2ac
Added "qwp -v"
2016-04-28 23:17:30 +02:00
Clifford Wolf
0bc95f1e04
Added "yosys -D" feature
2016-04-21 23:28:37 +02:00
Clifford Wolf
a47f69536a
Added support for installed plugins
2016-03-30 10:02:03 +02:00
Clifford Wolf
2c7e107d7a
Support for abstract modules in chparam
2016-03-21 16:37:35 +01:00
Clifford Wolf
825b99efc1
Added "stat -liberty" for calculating chip area
2016-02-04 12:26:13 +01:00
Clifford Wolf
1d62f8710f
Fixed "splitnets -ports" for hierarchical designs
2015-12-22 13:25:00 +01:00
Clifford Wolf
ab0c44d3ed
Added %R select expression
2015-12-20 13:35:58 +01:00
Clifford Wolf
e61c7f887a
Added torder command
2015-11-19 15:34:32 +01:00
Clifford Wolf
207736b4ee
Import more std:: stuff into Yosys namespace
2015-10-25 19:30:49 +01:00
Clifford Wolf
7f110e7018
renamed SigSpec::to_single_sigbit() to SigSpec::as_bit(), added is_bit()
2015-10-24 22:56:40 +02:00
Clifford Wolf
6af8076967
improvement in "stat"
2015-10-24 21:56:53 +02:00
Clifford Wolf
c35db8c19e
Disabled "Skipping blackbox module" msg in show command
2015-10-23 20:11:05 +02:00
Clifford Wolf
c58bd5dc30
Added edgetypes command
2015-09-27 11:53:20 +02:00
Clifford Wolf
281c1f4029
Some cleanups in qwp
2015-09-26 10:42:27 +02:00
Clifford Wolf
ec92c89659
Added pivoting to qwp solver
2015-09-24 22:16:37 +02:00
Clifford Wolf
69071bbc5f
Improved qwp performance
2015-09-24 21:50:37 +02:00
Clifford Wolf
b1e9cb332d
Added statistics summary to "qwp"
2015-09-24 21:22:24 +02:00
Clifford Wolf
11c27b5e69
Bugfix in "qwp" pass
2015-09-21 10:37:24 +02:00
Clifford Wolf
80898dcbc8
Improvements and fixes in "qwp" pass
2015-09-21 01:05:13 +02:00
Clifford Wolf
6329bea873
Added "qwp -dump"
2015-09-20 22:36:35 +02:00
Clifford Wolf
539c5eeb0f
Added "qwp" command
2015-09-20 18:28:46 +02:00
Clifford Wolf
6f9a6fd783
Fixed port ordering in "splitnets" cmd
2015-09-01 13:10:36 +02:00
Larry Doolittle
6c00704a5e
Another block of spelling fixes
...
Smaller this time
2015-08-14 23:27:05 +02:00
Clifford Wolf
0350074819
Re-created command-reference-manual.tex, copied some doc fixes to online help
2015-08-14 11:27:19 +02:00
Clifford Wolf
84bf862f7c
Spell check (by Larry Doolittle)
2015-08-14 10:56:05 +02:00
Clifford Wolf
08ad5409a2
Some ASCII encoding fixes (comments and docs) by Larry Doolittle
2015-08-13 09:30:20 +02:00
Clifford Wolf
4d0ba9b3b2
Fixed "check" command for inout ports
2015-07-27 09:54:58 +02:00
Clifford Wolf
8393f70538
Some fixes in "select" command
2015-07-16 22:10:26 +02:00
Clifford Wolf
6c84341f22
Fixed trailing whitespaces
2015-07-02 11:14:30 +02:00
Clifford Wolf
77e89399a6
Bugfix in chparam
2015-06-30 01:38:34 +02:00
Clifford Wolf
caa274ada6
Added design->rename(module, new_name)
2015-06-30 01:37:59 +02:00
Clifford Wolf
99100f367d
Added "rename -top new_name"
2015-06-17 09:38:56 +02:00
Clifford Wolf
4c733301e6
Fixed cstr_buf for std::string with small string optimization
2015-06-11 13:39:49 +02:00
Clifford Wolf
96be31de89
Preserve important attributes in splitnets
2015-04-29 07:44:57 +02:00
Clifford Wolf
2fc2f8f5b3
Added "splice -wires"
2015-04-13 19:28:12 +02:00
Clifford Wolf
21a1cc1b60
Added support for "file names with blanks"
2015-04-08 12:14:34 +02:00
Clifford Wolf
8eadd8fb18
Added %M and %C select operators
2015-04-07 22:22:09 +02:00
Clifford Wolf
1f33b2a490
Added "chparam -list"
2015-04-07 19:21:30 +02:00