Commit Graph

138 Commits

Author SHA1 Message Date
Miodrag Milanovic 6d98418f3d Set ranges on exported wires in VCD and FST 2024-08-02 15:23:00 +02:00
Jannis Harder 7c818d30f7 sim: Bring $print trigger/sampling semantics in line with FFs 2024-01-25 16:21:03 +01:00
Dag Lem acf916f654 Restore sim output from initial $display 2024-01-14 16:52:51 +01:00
Jannis Harder 57b4e16acd sim: Include $display output in JSON summary
This allows tools like SBY to capture the $display output independent
from anything else sim might log. Additionally it provides source and
hierarchy locations for everything printed.
2024-01-11 12:01:39 +01:00
Martin Povišer 6581b5593c sim: Print hierarchy for failed assertions 2023-12-06 12:09:07 +01:00
Martin Povišer c3fd88624a sim: Bail on processes
Instead of silently missimulating, error out when there are processes
found in the simulation hierarchy.
2023-10-05 19:25:17 +02:00
Martin Povišer a782b15aae sim: s/instanced/instantiated/ 2023-10-05 19:25:17 +02:00
Martin Povišer 6ac43e49bc sim: Change clocked read port suggestion to `memory_nordff`
`memory_nordff` has the advantage that it can be called just ahead of
the simulation step no matter whether the clocked read port has been
inferred or was explicitly instantiated in a flow.
2023-10-05 19:25:17 +02:00
Jannis Harder 7eaa4bcb46 sim: Add -noinitstate option and handle non-cosim initstate
This adds the -noinitstate option which is required to simulate
counterexamples to induction with yw-cosim. Also add handling for
$initstate cells for non-co-simulation.
2023-09-28 17:29:24 +02:00
Martin Povišer 5bef9b4e75
Merge pull request #3915 from povik/sim-print
sim: Add print support
2023-09-11 17:03:59 +02:00
Martin Povišer d4d951657f sim: Add `-assert` option to fail on failed assertions 2023-09-05 10:46:04 +02:00
Martin Povišer 50d117956c sim: Add print support 2023-09-04 17:12:38 +02:00
Martin Povišer f5485b59a9 sim: Bail if there are blackboxes in simulation 2023-07-20 21:01:03 +01:00
Jannis Harder e36c71b5b7 Use clk2fflogic attr on cells to track original FF names in witnesses
This makes clk2fflogic add an attr to $ff cells that carry the state of
the emulated async FF. The $ff output doesn't have any async updates
that happened in the current cycle, but the $ff input does, so the $ff
input corresponds to the async FF's output in the original design.

Hence this patch also makes the following changes to passes besides
clk2fflogic (but only for FFs with the clk2fflogic attr set):

  * opt_clean treats the input as a register name (instead of the
    output)

  * rename -witness ensures that the input has a public name

  * the formal backends (smt2, btor, aiger) will use the input's
    name for the initial state of the FF in witness files

  * when sim reads a yw witness that assigns an initial value to the
    input signal, the state update is redirected to the output

This ensures that yosys witness files for clk2fflogic designs have
useful and stable public signal names. It also makes it possible to
simulate a clk2fflogic witness on the original design (with some
limitations when the original design is already using $ff cells).

It might seem like setting the output of a clk2fflogic FF to update the
input's initial value might not work in general, but it works fine for
these reasons:

  * Witnesses for FFs are only present in the initial cycle, so we do
    not care about any later cycles.

  * The logic that clk2fflogic generates loops the output of the
    genreated FF back to the input, with muxes in between to apply any
    edge or level sensitive updates. So when there are no active updates
    in the current gclk cycle, there is a combinational path from the
    output back to the input.

  * The logic clk2fflogic generates makes sure that an edge sensitive
    update cannot be active in the first cycle (i.e. the past initial
    value is assumed to be whatever it needs to be to avoid an edge).

  * When a level sensitive update is active in the first gclk cycle, it
    is actively driving the output for the whole gclk cycle, so ignoring
    any witness initialization is the correct behavior.
2023-05-25 12:48:02 +02:00
Jannis Harder 7caeb922a0 sim: Run level triggered async updates to fixpoint during initialization 2023-05-25 12:46:16 +02:00
Jannis Harder ad2b04d63a sim: Fix cosimulation with nested modules having unconnected inputs
When assigning values to input ports of nested modules in cosimulation,
sim needs to find the actual driver of the signal to perform the
assignment. The existing code didn't handle unconnected inputs in that
scenario.
2023-05-18 16:50:11 +02:00
Krystine Sherwin 5a4e72f57a
Fix sim writeback check for yw_cosim
Writeback of simulation state into initial state was only working for `run()` and `run_cosim_fst()`.
This change moves the writeback into the `write_output_files()` function so that all simulation modes work with the writeback option.
2023-05-08 13:13:09 +12:00
Jannis Harder 1698202ccc sim: For yw cosim, drive parent module's signals for input ports 2023-02-13 12:26:06 +01:00
Jannis Harder d6c7aa0e3d sim/formalff: Clock handling for yw cosim 2023-01-11 18:07:16 +01:00
Jannis Harder 7ddec5093f sim: Improvements and fixes for yw cosim
* Fixed $cover handling
  * Improved sparse memory handling when writing traces
  * JSON summary output
2023-01-11 18:07:16 +01:00
Jannis Harder dda972a148 sim: New -append option for Yosys witness cosim
This is needed to support SBY's append option.
2023-01-11 18:07:16 +01:00
Jannis Harder 2dd5652215 sim: Add Yosys witness (.yw) cosimulation 2023-01-11 18:07:16 +01:00
Jannis Harder f6458bab70 sim: Only check formal cells during gclk simulation updates
This is required for compatibility with non-multiclock formal semantics.
2023-01-11 18:07:16 +01:00
Jannis Harder 9c6198a827 sim: Internal API to set $initstate
This is not yet added to any of the simulation drivers.
2023-01-11 18:07:16 +01:00
Jannis Harder 44b26d5c6d sim: Emit used memory addresses as signals to output traces
This matches the behavior of smtbmc.

This also updates the sim internal memory API to allow masked writes
where State::Sa bits (internal don't care - not a valid value for a
signal) leave the memory content unchanged.
2023-01-11 18:07:16 +01:00
Claire Xenia Wolf 1bc832a8e1 Allow non-unique modules without state in sim writeback-mode
Signed-off-by: Claire Xenia Wolf <claire@clairexen.net>
2022-12-21 10:43:02 +01:00
Jannis Harder 5ff69a0fe2 sim: Improved global clock handling 2022-11-30 18:50:53 +01:00
KrystalDelusion a14dec79eb
Rst docs conversion (#3496)
Rst docs conversion
2022-11-15 12:55:22 +01:00
Jannis Harder 9b4fba3870 sim: Run a comb-only update step to set past values during FST cosim
The previous approach only initialized past_d and past_ad while for FST
cosim we also need to initialize the other past values like past_clk,
etc. Also to properly initialize them, we need to run a combinational
update step in case any of the wires feeding into the FF are private or
otherwise not part of the FST.
2022-11-07 14:09:33 +01:00
KrystalDelusion 9465b2af95 Fitting help messages to 80 character width
Uses the regex below to search (using vscode):
	^\t\tlog\("(.{10,}(?<!\\n)|.{81,}\\n)"\);

Finds any log messages double indented (which help messages are)
and checks if *either* there are is no newline character at the end,
*or* the number of characters before the newline is more than 80.
2022-08-24 10:40:57 +12:00
Jannis Harder f7023d06a2 sim: -hdlname option to preserve flattened hierarchy in sim output 2022-08-16 13:37:30 +02:00
Jannis Harder c0063288d6 Add the $anyinit cell and the formalff pass
These can be used to protect undefined flip-flop initialization values
from optimizations that are not sound for formal verification and can
help mapping all solver-provided values in witness traces for flows that
use different backends simultaneously.
2022-08-16 13:37:30 +02:00
Jannis Harder 14ba50908b sim: Fix $anyseq in nested modules 2022-07-22 14:48:30 +02:00
Miodrag Milanovic 8e02b3ca30 fix crash when no fst input 2022-05-04 11:21:39 +02:00
Miodrag Milanovic ad48639cdd Start restoring memory state from VCD/FST 2022-05-04 10:41:04 +02:00
Miodrag Milanovic 3730db4b98 AIM file could have gaps in or between inputs and inits 2022-05-02 11:18:30 +02:00
Miodrag Milanovic bbfdea2f8a Match $anyseq input if connected to public wire 2022-04-22 17:20:17 +02:00
Miodrag Milanovic 4d80bc24c7 Treat $anyseq as input from FST 2022-04-22 16:23:39 +02:00
Miodrag Milanovic 33f4009bb5 Last sample from input does not represent change 2022-04-22 13:46:11 +02:00
Miodrag Milanovic 83cad82b29 latches are always set to zero 2022-04-22 12:04:05 +02:00
Miodrag Milanovic c989adcc2d If not multiclock, output only on clock edges 2022-04-22 12:03:39 +02:00
Miodrag Milanovic 75032a565d Set init state for all wires from FST and set past 2022-04-22 11:57:39 +02:00
Miodrag Milanovic 8fa2f3b260 Fix multiclock for btor2 witness 2022-04-22 11:53:41 +02:00
Miodrag Milanovic 9508bb2330 Fix reading aiw from other solvers 2022-04-15 11:45:16 +02:00
Miodrag Milanovic 6020ba67ac past_ad initial value setting 2022-04-02 19:13:15 +02:00
Miodrag Milanovic 2c96ecc5f7 setInitState can be only one altering values 2022-04-02 19:13:15 +02:00
Miodrag Milanovic b54aecd80a Set past_d value for init state 2022-04-02 19:13:15 +02:00
Miodrag Milanovic c95b9b4ba5 Support memories in aiw and multiclock 2022-03-31 13:10:13 +02:00
Miodrag Milanovic 322ab1cd54 Proper SigBit forming in sim 2022-03-22 14:43:18 +01:00
Miodrag Milanovic ff3b0c2c46 Proper SigBit forming in sim 2022-03-22 14:22:32 +01:00