With this change, failures to resume a hart due to it not being halted
are more explicitly logged or reported as an error.
Change-Id: Ia55d8df85a908363d0f2140637ce1e47c1ab6251
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This involves halting the target, which might have unintended side
effects, but when the debugger is connected software breakpoints must
trap to the debugger. Anything else is a terrible user experience.
Change-Id: I1f7bb610eeeb054cc3042dc6bcfc16589ce12a31
Signed-off-by: Tim Newsome <tim@sifive.com>
Will be used later when we want to do a quick halt/resume.
Change-Id: Ib80166234c4c277b7d9ce26b7566ac0f93017e64
Signed-off-by: Tim Newsome <tim@sifive.com>
* Only set ebreak bits that might be supported based on misa.
* Don't write dcsr if its value wouldn't change.
Change-Id: I7087af0b0df0fbdbf994373b5c887b9b389df872
Signed-off-by: Tim Newsome <tim@sifive.com>
Make it callable earlier, handle `supported` being NULL, and make enum
names more clear.
Change-Id: If4d286b54ccfc01eb5de5a57eb18f748c920e979
Signed-off-by: Tim Newsome <tim@sifive.com>
The riscv013_on_halt function was being called but its implementation was
empty, providing no additional functionality. Removed the function declaration,
calls to it, and its implementation since it is not required.
Change-Id: I425ea890deadeec945f0a47af247f3f99172e801
Signed-off-by: Tim Newsome <tim@sifive.com>
Otherwise we may end up modifying DCSR of a different hart than
intended.
Change-Id: I39bde21a1444623ed150f2b3d504b9318b9d6191
Signed-off-by: Tim Newsome <tim@sifive.com>
Register access on running target should fail if mstatus needs to be
modified.
Change-Id: Iec8e8d514ef2f5ca42606a5534cce55aaaa99180
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This way if you connect to a running target, before it's hit a breakpoint,
then when it does hit the breakpoint OpenOCD will catch it.
Change-Id: I6f1e5f169fa385f46759015786e664693c3872e4
Signed-off-by: Tim Newsome <tim@sifive.com>
Poll failure just means poll failed. It's safer to assume the target is
still running, because then if it is running and subsequently halts we can
relay this to gdb correctly. We can't do the other way around, because once
gdb thinks the target has halted, it can't deal with it spontaneously
running.
Change-Id: Idb56137f1d6baa9afc1b0e55e4a48f407b8ebe83
Signed-off-by: Tim Newsome <tim@sifive.com>
When a DM was powered down, we end up in examine() again, and clearly if
the DM was powered down we need to invalidate that cache.
Change-Id: I5eb6a289939f313e06c09cac22245db083026aa3
Signed-off-by: Tim Newsome <tim@sifive.com>
The error state is sticky, so this has to be done to recover.
Change-Id: I589f3cdab0f2351fd25f89951830cbc16c39bd93
Signed-off-by: Tim Newsome <tim@sifive.com>
In case in the future I have the same idea of optimizing progbuf writes
again.
Change-Id: Ie383487691cceeff75e2c22f4c85fc1fe4873937
Signed-off-by: Tim Newsome <tim@sifive.com>
Since the deletion of `-rtos hwthread`, there is no need to treat harts
with `-rtos` specified differently on reset.
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: I88a9129936b5172bb7479dfa1255e29ff460c054
No other attempt is made at doing anything hypervisor-specific. Are
other things necessary?
Change-Id: Ib65f114888840cf0878f9bfe028c9a42b436aa3f
Signed-off-by: Tim Newsome <tim@sifive.com>
Untested, because I don't have a target that implements this.
Change-Id: Iff82c124e7caf8e8960a9da62d8e727afb2c6b8a
Signed-off-by: Tim Newsome <tim@sifive.com>
We should avoid using x16~x31 register in program buffer because there
are no such general purpose registers in RVE(Embedded) extension.
For targets that support rvE, when the parameter increment=0
and count>1 of the read_memory_progbuf function, openocd will cause
an error due to the use of the s2 register.
For example:
{Command} {riscv repeat_read} count address [size=4]
Change-Id: I8b74dcc15cd00a400f2f1354c577a82132394435
Signed-off-by: Hang Xu <xuhang@eswincomputing.com>
* Add command "exec_progbuf"
Command "exec_progbuf" allows to execute a user-specified sequence
of instructions using the program buffer.
Change-Id: If3b9614129d0b6fcbc33fade29d3d60b35e52f98
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
* Updated the doc:
- Minor reword and reorder of the sentences.
- Added information about C-instructions in progbuf.
- Fixed a typo (per the review).
- Added examples.
Change-Id: I88c9a3ff3c6b60614be7eafd3a6f21be722a77b7
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
* Cosmetic changes
Change-Id: I7135c9f435f640e189c7d7922a2702814dfd595f
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
---------
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Co-authored-by: Jan Matyas <jan.matyas@codasip.com>
Because riscv_program_exec() tries to add an instruction every time
through.
This would cause an error accessing vector registers where VL > 14(?).
Change-Id: Ie676ca8c9be786b46aa2a4b4028ac8b27f7a4b40
Signed-off-by: Tim Newsome <tim@sifive.com>
This should make vector accesses work on 64-bit harts that implement
Zve32*. There doesn't appear to be any way to easily determine what vsew
values are allowed, so try and notice the failure.
Change-Id: Ide0722d0d67da402a4fbe88163830094e46beb84
Signed-off-by: Tim Newsome <tim@sifive.com>
OpenOCD currently uses improper "fence" instruction:
"FENCE" opcode with empty predecessor and successor sets.
Such instruction has no effect and is reserved for future use
as a HINT instruction (RISC-V Unprivileged ISA spec V20191213,
section 2.9).
This patch fixes it by using the proper "fence rw,rw"
instruction.
Change-Id: Ia2a66059009153efef27279410850ddfd73dae38
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
This command is supposed to be a start at a compliance test for system
bus access. It doesn't pass against spike because it doesn't handle all
cases where the interface might be busy. It's not documented. As far as
I know nobody uses it.
So delete 400 lines of code instead of trying to fix it.
Change-Id: Ib94f2acb95a48f7c07d4f44206ff7373b03857f3
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Then also set it when we resume in examine(), which doesn't use the full
abstractions because not all required data structures are filled out
yet.
Hopefully fixes#749.
Change-Id: I0c6ab16da1f035ca2fbdb9f7be1462d44ddce3a0
Signed-off-by: Tim Newsome <tim@sifive.com>
Exit the loop when no harts are running, instead of when at least one
hart has halted.
Change-Id: Ia69b626bf1fee4034bd5ccc800a651bfe0e53685
Signed-off-by: Tim Newsome <tim@sifive.com>
Mark Zhuang
Tim Newsome
Evgeniy Naydanov
Parshintsev Anatoly
Hang Xu
Jan Matyas
Jan Matyas