If hart can't change pc (e.g. it is running), resume command should
fail.
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: I14627366d574d806ea16262b7d305d8161f8bcc2
Since the deletion of `-rtos hwthread`, there is no need to treat harts
with `-rtos` specified differently on reset.
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: I88a9129936b5172bb7479dfa1255e29ff460c054
No other attempt is made at doing anything hypervisor-specific. Are
other things necessary?
Change-Id: Ib65f114888840cf0878f9bfe028c9a42b436aa3f
Signed-off-by: Tim Newsome <tim@sifive.com>
Icount triggers don't have a maskmax field at all. This is a cut and
paste error.
Change-Id: I001b3d41bf683599706dba713f7be475e8dd1668
Signed-off-by: Tim Newsome <tim@sifive.com>
When permission bits R, W, and X in PTE all three are zero,
the PTE is a pointter to the next level of the page table;
otherwise, it is a leaf PTE. Here PTE_W is missed.
Change-Id: I82a4cc4e64280f0fcad75b20e51b617520aff29b
Signed-off-by: panciyan <panciyan@eswincomputing.com>
- Manual integration of NX support from xt0.2 release
- No new clang static analysis warnings
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I95b51ccc83e56c0d4dbf09e01969ed6a4a93d497
Reviewed-on: https://review.openocd.org/c/openocd/+/7356
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
We were previously not zero-initializing ELF segments between p_filesz
and p_memsz (aka BSS). However, this may be necessary depending on the
user's application. Therefore, start doing so.
Change-Id: I5a743390069583aca7ee276f53afeccf2cac0855
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7513
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Untested, because I don't have a target that implements this.
Change-Id: Iff82c124e7caf8e8960a9da62d8e727afb2c6b8a
Signed-off-by: Tim Newsome <tim@sifive.com>
It is possible for triggers of the same type to support different match
field values, so it is needed to try all the triggers, not just the
first one.
Fixes issue #788.
Signed-off-by: Evgeniy Naydanov evgeniy.naydanov@syntacore.com
Change-Id: I4c9fbc98bae7259377456d9ad8e770232724a592
We should avoid using x16~x31 register in program buffer because there
are no such general purpose registers in RVE(Embedded) extension.
For targets that support rvE, when the parameter increment=0
and count>1 of the read_memory_progbuf function, openocd will cause
an error due to the use of the s2 register.
For example:
{Command} {riscv repeat_read} count address [size=4]
Change-Id: I8b74dcc15cd00a400f2f1354c577a82132394435
Signed-off-by: Hang Xu <xuhang@eswincomputing.com>
* target/riscv: hide_csrs configuration option
This option allows users to mark certain CSRs as hidden so they could be
expluded from *reg* output and target.xml
Change-Id: Iddf8456cd3901f572f8590329ebba5229974d24a
* Update doc/openocd.texi
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
---------
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
* Add command "exec_progbuf"
Command "exec_progbuf" allows to execute a user-specified sequence
of instructions using the program buffer.
Change-Id: If3b9614129d0b6fcbc33fade29d3d60b35e52f98
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
* Updated the doc:
- Minor reword and reorder of the sentences.
- Added information about C-instructions in progbuf.
- Fixed a typo (per the review).
- Added examples.
Change-Id: I88c9a3ff3c6b60614be7eafd3a6f21be722a77b7
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
* Cosmetic changes
Change-Id: I7135c9f435f640e189c7d7922a2702814dfd595f
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
---------
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Co-authored-by: Jan Matyas <jan.matyas@codasip.com>
Also refactor shared code for clearing itrigger/etrigger/icount.
Change-Id: Iac2e756332c89d2ed43435391e3c097abc825255
Signed-off-by: Tim Newsome <tim@sifive.com>
Because riscv_program_exec() tries to add an instruction every time
through.
This would cause an error accessing vector registers where VL > 14(?).
Change-Id: Ie676ca8c9be786b46aa2a4b4028ac8b27f7a4b40
Signed-off-by: Tim Newsome <tim@sifive.com>
This should make vector accesses work on 64-bit harts that implement
Zve32*. There doesn't appear to be any way to easily determine what vsew
values are allowed, so try and notice the failure.
Change-Id: Ide0722d0d67da402a4fbe88163830094e46beb84
Signed-off-by: Tim Newsome <tim@sifive.com>
While there, fix some coding style error and remove the now unused
function jim_arc_read_reg_name_field() and the macro
JIM_CHECK_RETVAL().
Change-Id: I140b4b929978b2936f2310e0b7d1735ba726c517
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7426
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
Use a COMMAND_HELPER() to avoid memory leaks when the helper
COMMAND_PARSE_NUMBER() returns due to an error.
While there:
- fix potential SIGSEGV due to dereference 'type' before checking
it's not NULL;
- fix an incorrect NUL byte termination while copying to
type->data_type.id and to bitfields[cur_field].name;
- fix some coding style error;
- remove the now unused function jim_arc_read_reg_type_field().
Change-Id: I7158fd93b5d4742f11654b8ae4a7abd409ad06e2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7425
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
Use a COMMAND_HELPER() to avoid memory leaks when the helper
COMMAND_PARSE_NUMBER() returns due to an error.
While there:
- fix potential SIGSEGV due to dereference 'type' before checking
it's not NULL;
- fix an incorrect NUL byte termination while copying to
type->data_type.id and to bitfields[cur_field].name;
- fix some coding style error.
Change-Id: Ide4cbc829871a6a523026ccc0d3100dadc2afd06
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7424
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
The command is specified through COMMAND_HANDLER. It should not
return JIM_OK / JIM_ERR.
Change-Id: I56666414d49b0298ecc23ec7ef30c77e1e27afa8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7413
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
Also drop arc_cmd_jim_get_uint32() that is now unused.
Change-Id: Ic26c3f008376db3f01215bf736fca736dd1c1a4f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7412
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
This also fixes several incorrect return ERROR_xxx from a jim
command.
Change-Id: I34fe3552d3dc344eac67bf504c5d5709b707fdfd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7411
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
This also fixes an incorrect return ERROR_OK from a jim command.
Change-Id: I72a522645f62b99b313573c8bad6d4f674c5ae53
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7410
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
This also fixes an incorrect return ERROR_OK from a jim command.
Change-Id: I1f9cf5d1dfa38b8a06042b5f54209e6ee2fc4e0e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7409
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
This also fixes an incorrect return ERROR_OK from a jim command.
Change-Id: Iab9bc7c25181341a632f608a8ef2d8b0bea72520
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7408
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
This also fixes an incorrect return ERROR_OK from a jim command.
Change-Id: I3c51355e7e05965327ce819a3114e370f2de5249
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7407
Tested-by: jenkins
Reviewed-by: Evgeniy Didin <didin@synopsys.com>
OpenOCD currently uses improper "fence" instruction:
"FENCE" opcode with empty predecessor and successor sets.
Such instruction has no effect and is reserved for future use
as a HINT instruction (RISC-V Unprivileged ISA spec V20191213,
section 2.9).
This patch fixes it by using the proper "fence rw,rw"
instruction.
Change-Id: Ia2a66059009153efef27279410850ddfd73dae38
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
This generalizes the little endian CRC32 function used in the OR1K
target and moves it to a common helper, so that other places do not need
to reinvent the wheel. It is directly used in the OR1K target.
Change-Id: I0e55340281a5bfd80669bb1994f3a96fecc1248a
Signed-off-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7415
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The org.gnu.gdb.arm.m-system GDB feature defines the name in lowercase
letters.[1] Not adhering to the definition can cause issues with tools
interacting with the GDB which expect the correct casing.
[1]: https://sourceware.org/gdb/onlinedocs/gdb/ARM-Features.html
Change-Id: I0b6584a78f86b053947d79686baad5dac3ec4a00
Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7292
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Cortex-M support for SMP multicore targets.
This SMP implementation unlike older ones does not act
on the first halted target found. It polls targets
until a SMP group is finished and stores eventual
'halted' events instead of emitting them. As soon as polling
of a group is done, poll proceeds with SMP related tasks.
This approach improves detection of a reason why debug
stopped - a correct reason is detected for all targets,
not only for the first found.
Drawback: SMP target group should be defined in the same
order as the targets were defined.
Obsolete gdb 'J' packet/smp_gdb command core switching is not implemented,
use with rtos hwthread.
Only one core is resumed if debug_execution is requested.
Some ideas taken from Graham Sanderson's [4936]
and src/target/aarch64.c
Added error checking of armv7m_restore_context().
Change-Id: I60f5b79e74b624dc2b5835ff10e38ac2ccb23792
Link: [4936]: target/cortex_m: Add smp support for Cortex M | https://review.openocd.org/c/openocd/+/4936
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7239
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
When pointer authentication is enabled, some upper bits of the link
register (LR[63:VA_SIZE]) are used to store a signature. Therefore, GDB
need to remove the signature to get backtraces.
GDB has support of pointer authentication. When pointer authenticaion is
enabled, GDB requests 8-bytes mask to the target to remove the
signature. mask[63:VA_SIZE] should be all set and mask[VA_SIZE-1:0]
should be all cleared. GDB removes the signature by addr&~mask or
addr|mask.
I added a feature to provide the mask for pointer authentication.
Signed-off-by: Koudai Iwahori <koudai@google.com>
Change-Id: I56fbbf9cc23619b6536ecd326f350c8bf137f322
Reviewed-on: https://review.openocd.org/c/openocd/+/7248
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
In any case flag will be set as examined.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I5177ee656f726a807269e2f4725223f50e49e855
Reviewed-on: https://review.openocd.org/c/openocd/+/7231
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The target nds32 and its companion adapter aice have not received
any real improvement since 2013.
It has been hard to keep them aligned during the evolution of
OpenOCD code, with no way for maintainers to really check if they
are still working.
No real documentation is present for them in OpenOCD.
The nds32 code triggers ~50 errors/warnings with scan-build.
The arch nds32 has been dropped from Linux kernel v5.18-rc1.
For all the reasons above, this code has been deprecated with
commit 2e5df83de7 ("nds32: deprecate it, together with aice
adapter driver") and tagged to be dropped before v0.13.0.
Let it r.i.p. in OpenOCD git history.
While there, drop from checkpatch list the camelcase symbols that
where only used in this code.
Change-Id: Ide52a217f2228e9da2f1cc5036c48f3536f26952
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7382
Tested-by: jenkins
This patch fixes two corner-cases of finding RTT control block.
The first one is when there was a partial match (even single byte) at
the end of loaded buffer (uint8_t buf[1024]), but this was not part of
full match. In that case `cb_offset` was not updated correctly and the
returned `*address` was lower by the legth of the partial match. In case
of searched 'SEGGER RTT' (the default control block ID) string, it was
enough to match `buf[1023] == 'S'`, which is quite likely to happen, and
the `*address` was offset by 1 (e.g. it was 0x20000fff instead of
0x20010000).
Updating (or even maintaining) `cb_offset` is not needed, as start
address of control block can be calculated based on memory address that
was loaded into `uint8_t buf[1024]`, the offset within this buffer and
the length of expected string.
The second issue is when control block is prepended with a byte that
matches first ID character, e.g. there is `SEGGER RTT` control block ID
is prepended by another `S`, making memory contents be `SSEGGER RTT`. In
that case there was no match found.
Fix that issue by making sure that tested byte is always compared with
first byte of expected control block ID.
While at it, change names of local variables to better describe their
meaning.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Change-Id: I12aa6e202bf12bedcbb888ab595751a2a2518a24
Reviewed-on: https://review.openocd.org/c/openocd/+/7429
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This command is supposed to be a start at a compliance test for system
bus access. It doesn't pass against spike because it doesn't handle all
cases where the interface might be busy. It's not documented. As far as
I know nobody uses it.
So delete 400 lines of code instead of trying to fix it.
Change-Id: Ib94f2acb95a48f7c07d4f44206ff7373b03857f3
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
This lets the user set an itrigger trigger, which doesn't fit in the
normal breakpoint abstraction.
This implementation only allows control of a single itrigger. Hardware
could support more than one, and that may be useful to catch different
interrupts in different execution modes. But it would make the code/UI
more complex and it feels like an unlikely use case.
Change-Id: I76c88636ee73d4bd298b2bd1435cb5d052e86c91
Signed-off-by: Tim Newsome <tim@sifive.com>
Cores armv8m, e.g. Cortex-M33, can be instantiated without the
optional Security Extension.
In this case, the secure registers are not present and when GDB
try accessing them it triggers a set of errors.
For armv8m cores without security extension, don't provide to GDB
the description of the secure registers.
Change-Id: I254478a4cf883e85b786df3f62c726b2f40d88d9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7402
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
When target is stopped in WFI/WFE or is in an infinite loop, the
sampled PC will always return the same value.
Command 'profile' requires that distance between min and max PC
should be at least 2, which is not the case for constant PC, and
incorrectly enforces the check through as assert().
Move the code that reads the optional parameters 'start' and 'end'
and check the gap 'end - start' before running the profile.
For self-computed min and max, increase max (or decrease min) to
match the required constraint.
Drop the assert().
Change-Id: I2be8df8568ce8c889923888c492e4f7ce354b16b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: https://sourceforge.net/p/openocd/tickets/370/
Reviewed-on: https://review.openocd.org/c/openocd/+/7400
Tested-by: jenkins
The implementation of command 'monitor profile' has few
issues:
- the address_space is a signed int, so cannot wrap-around on
space over INT_MAX;
- max address is incremented without check for overflow;
- assert() used on errors instead of returning error codes;
- only handles 32 bits PC;
- output file created and left empty on error.
This patch fixes the first two issues, as a wider fix would be too
invasive and should be postponed in a following series.
Change-Id: Id8ead3f6db0fd5730682a0d1638f11836d06a632
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: https://sourceforge.net/p/openocd/tickets/370/
Reviewed-on: https://review.openocd.org/c/openocd/+/7394
Tested-by: jenkins
Clang complains about the variable 'orig_dfsr' that can be used
uninitialized both in cortex_a_read_cpu_memory() and in
cortex_a_write_cpu_memory().
The issue is caused by an incorrect error path that used to jump
through 'goto out'. The code after the label 'out' is specific to
handle the case of an error during memory R/W; it is incorrect to
jump there to handle an error during the initialization that
precedes the memory R/W.
Replace the 'goto out' with 'return retval'.
Remove the label 'out' that is now unused.
Change-Id: Ib4b140221d1c1b63419de109579bde8b63fc2e8c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7393
Tested-by: jenkins
Commit 35a503b08d ("arm_adi_v5: add ap refcount and add get/put
around ap use") modifies the examine functions of mem_ap, cortex_m,
cortex_a and aarch64 by calling dap_put_ap() and then looking again
for the mem-ap and calling dap_get_ap().
This causes an issue if the system is irresponsive and the examine
fails and left the AP pointer to NULL. If the system was already
examined the NULL pointer will cause a SIGSEGV.
Commit b6dad912b8 ("target/cortex_m: prevent segmentation fault
in cortex_m_poll()") proposes a fix for one specific case and only
on cortex_m.
Modify all the examine functions by skipping look-up for the AP if
it was already set in a previous examine; the target's AP is not
supposed to change during runtime.
Remove the partial fix for cortex_m as it is not needed anymore.
Change-Id: I806ec3b1b02fcc76e141c8dd3a65044febbf0a8c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 35a503b08d ("arm_adi_v5: add ap refcount and add get/put around ap use")
Reviewed-on: https://review.openocd.org/c/openocd/+/7392
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Without the fix, will see "Can not find free FP Comparator" error log
Change-Id: Id0d91cc02b7055e44d27507f9c05ccd48ff49838
Signed-off-by: Nima Palizban <n.palizban@gmail.com>
Fixes: fb43f1ff4e (target: Rework 'set' variable of break-/watchpoints)
Reviewed-on: https://review.openocd.org/c/openocd/+/7389
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
If multiple targets are specified as -rtos <rtos_type>, the
rtos_update_threads was called only if the last target was specified as
rtos, which is inconsistent with other checks of whether or not smp target
is an rtos one.
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: Ie52bc6b6c8f841d31b9590fcbc44e985d3cba0eb
Reviewed-on: https://review.openocd.org/c/openocd/+/7244
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Then also set it when we resume in examine(), which doesn't use the full
abstractions because not all required data structures are filled out
yet.
Hopefully fixes#749.
Change-Id: I0c6ab16da1f035ca2fbdb9f7be1462d44ddce3a0
Signed-off-by: Tim Newsome <tim@sifive.com>
Exit the loop when no harts are running, instead of when at least one
hart has halted.
Change-Id: Ia69b626bf1fee4034bd5ccc800a651bfe0e53685
Signed-off-by: Tim Newsome <tim@sifive.com>
It used to set all states to halted, but that's not right for harts that
are now unavailable. (It might be possible to call poll() at the right
time instead of duplicating some of its code, but I didn't see an easy
way to do that. The real requirement is that target->state is set to
TARGET_UNAVAILABLE before TARGET_EVENT_HALTED is is sent in
halt_finish(), because that's what triggers hwthread_update_threads(),
which must know about unavailable harts so they can be hidden from gdb.
Change-Id: I0a0bbdd4ec9ff8c9898e04045b84e1d2512c9336
Signed-off-by: Tim Newsome <tim@sifive.com>
There used to be entirely separate code paths depending on whether we're
in SMP mode or not. Now they're both the same.
Change-Id: I8f46295e4bc005f441af0c03d4f608c53b8a6586
Signed-off-by: Tim Newsome <tim@sifive.com>
This ensures that we populate the register cache and set target->state.
Some RISC-V changes had upset the balance.
Change-Id: I47fbf8ebd8fe39fa5b752212080f87e3b7e6e5e5
Signed-off-by: Tim Newsome <tim@sifive.com>
We don't correctly write it, so we shouldn't expect it to read back the
same value. Fixes hardware breakpoints on mcontrol triggers.
Change-Id: Ie5e445060ec9c8887af933fd8887e57308330f09
Indicate to the JTAG driver that it does not need
to read and return the DR register value after scanning the
JTAG chain.
riscv_batch_run(), calls jtag_add_dr_scan() to schedule a
DR scan operation. Eventually, this will result in the JTAG
driver performing a JTAG scan to write to or read from DR.
The decision on whether to write to and/or read from DR
register is determined by the second parameter to
jtag_add_dr_scan(), i.e. a "struct scan_field".
Of particular interest here is if
batch->fields[i]->in_value is not NULL, the JTAG developer
must return the DR value collected from the JTAG scan
operation.
When creating the DR scan operation instruction with
riscv_batch_add_dmi_write(), batch->fields[i]->in_value points
to a location in batch->data_in buffer,
meaning batch->field[i]->in_value is not NULL, and the JTAG
developer must therefore read and return the DR value collected.
The returning of the DR value is redundant in a write
operation.
This patch set batch->fields[i]->in_value to NULL to indicate
the DR value need not be returned. This allows the JTAG
developer to optimize away any code associated with returning
the DR value.
Normally, the extra work to return the DR value is negligible.
However, in one usecase it introduces significant delays
In this use case a JTAG driver forwards
all JTAG scan to a server on a network. If the server has to
return the DR value, it has to perform the JTAG scan before
replying to the JTAG driver, and only then the JTAG driver
can send the next JTAG scan operation. However, if there is
no need to return the DR value, the server can
acknowledge the JTAG operation request immediately,thus
signalling to the JTAG driver that it is free to send the next
JTAG scan operation. At the same time of receiving the second
JTAG operation the server will process the original JTAG scan.
This saves time and mitigates network delay. Also, not having
to include the DR value in resulting in smaller reply packet
from server to JTAG driver and save on network traffic.
This doubles download speeds to spike using remote bitbang.
Change-Id: Ibb37c3e32af0cc7006b22b8c4e1f31ed29c21d0f
Signed-off-by: Ooi, Cinly <cinly.ooi@intel.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Ooi, Cinly <cinly.ooi@intel.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Ooi, Cinly <cinly.ooi@intel.com>
It's only used to change what callback events are generated, and there
are none anyway. (That's probably a bug, but since 0.11 is so rare I'm
not going to worry about it.)
Fixes#757.
Change-Id: I5b5df3a9bec927fb0368304229533e2875a83f6b
Signed-off-by: Tim Newsome <tim@sifive.com>
breakpoint_add should use rtos only if request is done by gdb.
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: I779d1a905c6a3640869dca162e3cc001919e8f42
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
armv7m_start_algorithm() saves register values to arch_info->context.
armv7m_wait_algorithm() restores register values from arch_info->context.
Exclude registers with flag exist = false from both loops.
While on it refactor the register restore: introduce 'struct reg' pointer
and dereference it instead of numerous accesses by a full path
from armv7m pointer.
Change-Id: I1600084db84809ee13bcf8e7828b79f8c9ff9077
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7276
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
On some boards there is a HW bug: if fp unit is disabled (fs in mstatus
set to 0), accessing any fp register results in a hang (any abstract
command timeouts, untill the board is rebooted).
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: I0c0d1033889f15dcc326c4078bf9cbb5a8558565
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Clang get confused by initializing the array uint16_t lock_word[],
casting it to (uint8_t *), then accessing the second element of
the uint8_t pointer.
src/target/dsp5680xx.c:2046:41: warning: The left operand of '<<'
is a garbage value [core.UndefinedBinaryOperatorResult]
uint16_t tmp = (buffer[0] | (buffer[1] << 8));
~~~~~~~~~ ^
Fix it by replacing the array with a single uint16_t.
The code is still depending on host endianness; no fix for this is
proposed.
Change-Id: I16dfd60cab117dd145aeecf10d9593574ff233a2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7302
Tested-by: jenkins
The function esirisc_jtag_recv() can be called with argument
num_in_fields = 0, for example as consequence of calling
esirisc_jtag_continue().
In this case, num_in_bytes is zero and the allocation of the
variable-length array 'r' requires size zero.
src/target/esirisc_jtag.c:133:2: warning: Declared variable-length
array (VLA) has zero size [core.VLASize]
uint8_t r[num_in_bytes * 2];
^~~~~~~~~ ~~~~~~~~~~~~~~~~
Fix it by forcing size one when num_in_bytes is zero.
Change-Id: Id764c7b5ec4f5b3c18c7da650bbff39fc98ed049
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7301
Tested-by: jenkins
Clang assumes that size could assume a value that is not 1 nor 2
nor 4. In such condition the buffer in t is allocated (size != 1)
and not initialized. This triggers an error:
src/target/openrisc/or1k_du_adv.c:655:14: warning: 2nd function
call argument is an uninitialized value [core.CallAndMessage]
crc_calc = adbg_compute_crc(crc_calc, data[i], 8);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add the default case to cover other values of size.
After this fix, clang still complains on the same line, this time
misunderstanding the limits of the loop and considering that
buf_bswap16() only swaps the first 16 bits, thus passing not
initialized value data[2] to adbg_compute_crc()
Replace malloc() with calloc() to silent it.
Change-Id: I358d7fb2ebefd69255670641bd435b770762a301
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7300
Tested-by: jenkins
E.g. the Zve* vector extensions have all the same registers as the full
V extension, but leaves misa.V clear.
Change-Id: Ib08c3612c52bb3a6b074d9431e3396c8f2f0ff27
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Prep work for handling unavailable harts.
Change-Id: I9c00ed4cdad8edeaa5a13fbec7f88f40d8af9028
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
* Use match field for trigger
The watchpoint cannot capture all data modifications only through the
trigger of ANY SIZE and EQUAL, and an error will occur. This patch
accommodates watchpoints by adding more types of matches
Change-Id: I5c3c908dbd49ca47755b06f5cdbe451be3a81c8b
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Change-Id: I3670347c4b00bf508373f7cc2f4950cbc09d6e2a
Signed-off-by: Xiang W <wxjstz@126.com>
* Add variable type trigger support
Change-Id: I60922c5f98574040b9a160e2aa0355871a581fe1
Signed-off-by: Xiang W <wxjstz@126.com>
* remove trailing whitespace
Change-Id: I168812e12b459ae3c4b3017c27a9b897e65d9f84
Signed-off-by: Xiang W <wxjstz@126.com>
* update triggers enumerate
Change-Id: I23a66afb0f772934b8911b522d0e4f116917519f
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
* target/riscv: Deal with DMI busy in sample_memory_bus_v1()
Change-Id: I810a4c4b7f02cb40ea99b7a500dce23c1bbd9231
Signed-off-by: Tim Newsome <tim@sifive.com>
* Comment code more clearly.
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
* Remove extra tab
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
* target/riscv Fix dm->current_hartid corruption on hartsellen discovery
Change-Id: Iec969df2675b608365eda2c3a83a4185752430f2
Signed-off-by: Charles Papon <charles.papon.90@gmail.com>
* target/riscv Ensure HART_INDEX_DIRTY does not have side effects
Change-Id: Ie89c94d97cd4f15c1be0327fddff75beea6ae027
Signed-off-by: Charles Papon <charles.papon.90@gmail.com>
Signed-off-by: Charles Papon <charles.papon.90@gmail.com>
This is added for future RISC-V changes. The RISC-V debug interface can
explicitly tell a debugger when a hart is unavailable. This is used for
instance when that hart is powered down (or yet to be powered up out of
reset).
Change-Id: I8a062d59eea1e5b3c788281a75159592db024683
Signed-off-by: Tim Newsome <tim@sifive.com>
`xtensa_do_step` is invoked from `xtensa_prepare_resume` to silently
step over BP/WP before resuming.
For example; in the case of WPs (DEBUGCAUSE_DB), in the current
implementation `xtensa_do_step` will generate one more
`TARGET_EVENT_HALTED` after the original one caused by WP itself.
This patch moves the halted event cb call after
the step is done successfully.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I9048e14fb316dc124847a42cfaefb1f76b5ce53e
Reviewed-on: https://review.openocd.org/c/openocd/+/7274
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
- Fix the declaration of riscv command 'set_mem_access'.
- Remove non existing riscv command 'set_scratch_ram'.
- Add riscv commands 'info', 'reset_delays'; copy the description
from the 'help' text.
- Don't add riscv commands 'set_prefer_sba' and 'test_sba_config_reg'
as they are marked as deprecated.
- Ensure that 'test_sba_config_reg' prints a deprecation warning
when used.
Change-Id: I39dc3aec4e7f13b69ac19685f1b593790acdde83
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7268
Reviewed-by: Tim Newsome <tim@sifive.com>
Tested-by: jenkins
* target/riscv: Correctly set target->state in deassert_reset
This bug didn't lead to problems, but it would with some upcoming
changes.
Change-Id: I552acbae9977150c4c9e573f8852033bc80fcebb
Signed-off-by: Tim Newsome <tim@sifive.com>
* Keep debug_reason in sync with state
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Currently 'number' field is zero in the register cache and
this causes an issue on `rtos get_thread_reg_list` calls.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Iaef11e01f55d012969bbc1933f82847d5e02fec5
Reviewed-on: https://review.openocd.org/c/openocd/+/7246
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* [riscv] step operation handler should respect handle_breakpoints parameter
When step operation is requested the OpenOCD frontend (like gdb server
or TCL server) has an option to control how existing breakpoints are
handled upon step.
Some OpenOCD frontends (like gdbserver) may choose to disable special
handling of existing breakpoints - thus handle_breakpoints is set to 0,
while others (like TCL server) expect target handler to temporary
disable the matching breakpoint to allow the step operation to complete
successfully.
In the current implementation handle_breakpoints parameter was ignored
by target-specific handler. Thus, the following sequence of commands:
```
halt
bp <current_pc> 4
step
```
Resulted in *step* operation to not change PC because of bp match.
This commit addresses this issue.
* Adjusted calls to logging facilities (addressed review comments)
Co-authored-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
Co-authored-by: Tim Newsome <tim@sifive.com>
* Properly track selecting multiple harts at once.
use_hasel is a bit of a hack.
Change-Id: Ia589ebc16bca32038d915df9988361b88e940917
Signed-off-by: Tim Newsome <tim@sifive.com>
* Clarifying comment.
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
* Rename set_hartsel to set_dmcontrol_hartsel
Change-Id: Iab28531281aa6fc604ec7d34974ed444ea9ea850
* Make set_dmcontrol_hartsel() more idiomatic.
Change-Id: I56a885043c515359e33b9c8a03aed637c81d1486
* Use constant for multiple harts instead of -1.
Change-Id: Iefeaf74202f2b4918d21f15f7ff7ca514175b8fb
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Also add an early exit for if any harts are unavailable.
Change-Id: I0875d4d213c9faf87b219d8d57e440881366c8f8
Signed-off-by: Tim Newsome <tim@sifive.com>
arp_waitstate will not work on not-examined state
Change-Id: I56c3e1c7e63af108e4ed1dbacebb567f9bf46264
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7230
Tested-by: jenkins
Reviewed-by: Erwan Gouriou
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
An application often idling in real sleep mode may make a Cortex-M target
hard to access as CPU clock are gated and debug requests are responded
by WAIT ack.
Try to examine the target under reset as the last resort.
Change-Id: I7c3de39fb1e6c23b76e2a0a85ab75f23aac94c4d
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7229
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
An application often idling in real sleep mode may make a Cortex-M target
hard to access as CPU clock are gated and debug requests are responded
by WAIT ack.
Try to examine the target under reset as the last resort.
Change-Id: Ife875a966a838c37dde987bc584ad0a1f4d020d6
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7228
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
After merging [1] 'reset halt' does not work on not responding Cortex-M.
Relax the examined tests and try to set vector catch VC_CORERESET
if debug_ap is available.
While on it add an info about examination state to debug logs.
Fixes: [1] commit 98d9f1168c ("target: reset target examined flag if target::examine() fails")
Change-Id: Ie2e018610026180af5997d70231061a275f05c76
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6745
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
For 64-bit TAR setup, if 'tar_valid == false' perform the upper 32-bit
write even if the cached copy matches the upper TAR value to be written.
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Change-Id: I320377dc90a9d1d7b64cbb281b2527e56c7621ee
Reviewed-on: https://review.openocd.org/c/openocd/+/7245
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Read values must be at albuff so that can be copied to buffer
on function exit.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I74a533e8f12f1002ca06a98a7c7cd928552b4cc5
Reviewed-on: https://review.openocd.org/c/openocd/+/7226
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Actually they are the base of epc and eps
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I4f43b9609a9929399fb5d3fa0203efc8a98e94c9
Reviewed-on: https://review.openocd.org/c/openocd/+/7227
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
armv7m_start_algorithm() stored all non-debug execution
registers from register cache without checking validity.
Check if the register cache is valid.
Try to read from CPU if not valid.
Issue a warning if register read fails.
Change-Id: I365f86d65243230cf521b13909575e5986a87a50
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7240
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
This was used to track which hart a given operation must apply to. But
we already have a target associated with each operation, and from there
we can find the desired hart id. dm013_info_t already tracks
current_hartid (meaning which hart ID is currently selected by the DM).
This makes the code simpler to understand. Also it turns out we don't
need to make sure the correct hart ID is currently selected because
there are only a few real entry points.
Change-Id: Ibe8d5e156523397f245edd6ec0a5df3239b717bf
Signed-off-by: Tim Newsome <tim@sifive.com>
swd_multidrop_select() uses its own retry loop.
If select fails, do_reconnect flag remains set on exit and causes
useless reconnect.
Clear do_reconnect flag in retry loop.
Change-Id: Ie06d6967d7f4a977774c8530bb8d4b3e5ab4f62c
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7217
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Tested-by: jenkins
Implementation of ADI v6 introduced banking of DP reg 0.
The accompanying change preventing DP SELECT write before
DP IDR read during connect was added to swd_connect_single() only.
Unchanged swd_connect_multidrop() / swd_multidrop_select_inner()
was broken as it emited DP SELECT and put DP to protocol error state.
Copy dap->select handling to swd_multidrop_select_inner().
Fixes: 72fb88613f (adiv6: add low level swd transport)
Change-Id: I514cd6d9ae2ba97ce3657b459df22638c278a0b1
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7213
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
According to RISC-V External Debug Support Version 0.13.2 (paragraph
3.12.6), cmderr field contains a valid value only if busy is 0, so it is
incorrect to analize it on timeout.
Increase "value_buf" size so it can hold a 64-bit number represented
as a string. Previous size could only hold a 32-bit number string.
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Change-Id: If6fbc875236e6ddc59522fbc25db0129eb60ee27
Reviewed-on: https://review.openocd.org/c/openocd/+/7221
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Scan-build reports:
Logic error: Uninitialized argument value
riscv.c:2688 2nd function call argument is an uninitialized value
This is a real error cause by running the command "riscv
authdata_write" without arguments. In such case 'value' is not
initialized and is passed to and used by r->authdata_write().
Reorganize the code to:
- detect the correct amount or command's arguments;
- drop the LOG_ERROR() on ERROR_COMMAND_SYNTAX_ERROR;
- drop the 'else' after 'return'.
Change-Id: I62e031220593b8308bc674b753e15d16d4c5c9ac
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7210
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
Scan-build reports:
Logic error: Result of operation is garbage or undefined
riscv.c:1614 The result of the left shift is undefined due
to shifting by '4294967281', which is greater or
equal to the width of type 'target_addr_t'
This is a false warning due to clang that considers the impossible
case of 32 bits hart (xlen = 32) in SATP_MODE_SV48 mode
(info->va_bits = 48).
Under such case:
riscv.c:1614 ... ((target_addr_t)1 << (xlen - (info->va_bits - 1))) ...
the shift amount wraps around the unsigned type and assumes the
value 4294967281 (0xfffffff1).
Use assert() to prevent clang from complaining.
Change-Id: I08fdd2a806c350d061641e28cf15a51b397db099
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7209
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Tested-by: jenkins
Scan-build reports:
Unused code: Dead nested assignment
riscv.c:459 Although the value stored to 'ir_user4_raw' is
used in the enclosing expression, the value is
never actually read from 'ir_user4_raw'
This is caused by the value reassigned in 'ir_user4_raw':
riscv.c:459 ir_user4[3] = (uint8_t)(ir_user4_raw >>= 8);
but never used.
Drop the DIY conversion in favor of h_u32_to_le() that does not
reassign the input value.
Change-Id: Ifad29f4c46d4a2d0a2f5a5c4104d768cc3db2794
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7208
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Tested-by: jenkins
Scan-build reports:
Unused code: Dead assignment
riscv.c:716 Value stored to 'result' is never read
Remove the initialization of variable 'result'.
Change-Id: Ied67bb4fcfa5bace186522074247ead43a5d5cd5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7207
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Tested-by: jenkins
Scan-build reports:
Unused code: Dead initialization
riscv-013.c:2362 Value stored to 'control' during its
initialization is never read
Remove the initialization of variable 'control'.
Change-Id: I548f8175530b9a2aa4c1788549d6467bf9824584
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7206
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Tested-by: jenkins
Tim Newsome
Parshintsev Anatoly
Evgeniy Naydanov
Mark Zhuang
panciyan
Ian Thompson
Peter Collingbourne
Hang Xu
Anatoly Parshintsev
Jan Matyas
Antonio Borneo
Jan Matyas
Marian Buschsieweke
Boris-Chengbiao Zhou
Tomas Vanek
Koudai Iwahori
Erhan Kurubas
Marcin Niestroj
Nima Palizban
Dolu1990
Evgeniy Naydanov
Xiang W
Daniel Goehring
Dmitry Ryzhov