yosys/passes/pmgen/ice40_dsp.pmg

pattern ice40_dsp

udata <std::function<SigSpec(const SigSpec&)>> unextend
state <SigBit> clock
state <bool> clock_pol cd_signed o_lo
state <SigSpec> sigA sigB sigCD sigH sigO
state <Cell*> add mux
state <IdString> addAB muxAB

state <bool> ffAholdpol ffBholdpol ffCDholdpol ffOholdpol
state <bool> ffArstpol ffBrstpol ffCDrstpol ffOrstpol

state <Cell*> ffA ffAholdmux ffArstmux ffB ffBholdmux ffBrstmux ffCD ffCDholdmux
state <Cell*> ffFJKG ffH ffO ffOholdmux ffOrstmux

// subpattern
state <SigSpec> argQ argD
state <bool> ffholdpol ffrstpol
state <int> ffoffset
udata <SigSpec> dffD dffQ
udata <SigBit> dffclock
udata <Cell*> dff dffholdmux dffrstmux
udata <bool> dffholdpol dffrstpol dffclock_pol

match mul
	select mul->type.in($mul, \SB_MAC16)
	select GetSize(mul->getPort(\A)) + GetSize(mul->getPort(\B)) > 10
endmatch

code sigA sigB sigH
	unextend = [](const SigSpec &sig) {
		int i;
		for (i = GetSize(sig)-1; i > 0; i--)
			if (sig[i] != sig[i-1])
				break;
		// Do not remove non-const sign bit
		if (sig[i].wire)
			++i;
		return sig.extract(0, i);
	};
	sigA = unextend(port(mul, \A));
	sigB = unextend(port(mul, \B));

	SigSpec O;
	if (mul->type == $mul)
		O = mul->getPort(\Y);
	else if (mul->type == \SB_MAC16)
		O = mul->getPort(\O);
	else log_abort();
	if (GetSize(O) <= 10)
		reject;

	// Only care about those bits that are used
	int i;
	for (i = 0; i < GetSize(O); i++) {
		if (nusers(O[i]) <= 1)
			break;
		sigH.append(O[i]);
	}
	log_assert(nusers(O.extract_end(i)) <= 1);
endcode

code argQ ffA ffAholdmux ffArstmux ffAholdpol ffArstpol sigA clock clock_pol
	if (mul->type != \SB_MAC16 || !param(mul, \A_REG).as_bool()) {
		argQ = sigA;
		subpattern(in_dffe);
		if (dff) {
			ffA = dff;
			clock = dffclock;
			clock_pol = dffclock_pol;
			if (dffrstmux) {
				ffArstmux = dffrstmux;
				ffArstpol = dffrstpol;
			}
			if (dffholdmux) {
				ffAholdmux = dffholdmux;
				ffAholdpol = dffholdpol;
			}
			sigA = dffD;
		}
	}
endcode

code argQ ffB ffBholdmux ffBrstmux ffBholdpol ffBrstpol sigB clock clock_pol
	if (mul->type != \SB_MAC16 || !param(mul, \B_REG).as_bool()) {
		argQ = sigB;
		subpattern(in_dffe);
		if (dff) {
			ffB = dff;
			clock = dffclock;
			clock_pol = dffclock_pol;
			if (dffrstmux) {
				ffBrstmux = dffrstmux;
				ffBrstpol = dffrstpol;
			}
			if (dffholdmux) {
				ffBholdmux = dffholdmux;
				ffBholdpol = dffholdpol;
			}
			sigB = dffD;
		}
	}
endcode

code argD ffFJKG sigH clock clock_pol
	if (nusers(sigH) == 2 &&
			(mul->type != \SB_MAC16 ||
			 (!param(mul, \TOP_8x8_MULT_REG).as_bool() && !param(mul, \BOT_8x8_MULT_REG).as_bool() && !param(mul, \PIPELINE_16x16_MULT_REG1).as_bool() && !param(mul, \PIPELINE_16x16_MULT_REG1).as_bool()))) {
		argD = sigH;
		subpattern(out_dffe);
		if (dff) {
			// F/J/K/G do not have a CE-like (hold) input
			if (dffholdmux)
				goto reject_ffFJKG;

			// Reset signal of F/J (IRSTTOP) and K/G (IRSTBOT)
			//   shared with A and B
			if ((ffArstmux != NULL) != (dffrstmux != NULL))
				goto reject_ffFJKG;
			if ((ffBrstmux != NULL) != (dffrstmux != NULL))
				goto reject_ffFJKG;
			if (ffArstmux) {
				if (port(ffArstmux, \S) != port(dffrstmux, \S))
					goto reject_ffFJKG;
				if (ffArstpol != dffrstpol)
					goto reject_ffFJKG;
			}
			if (ffBrstmux) {
				if (port(ffBrstmux, \S) != port(dffrstmux, \S))
					goto reject_ffFJKG;
				if (ffBrstpol != dffrstpol)
					goto reject_ffFJKG;
			}

			ffFJKG = dff;
			clock = dffclock;
			clock_pol = dffclock_pol;
			sigH = dffQ;

reject_ffFJKG: 		;
		}
	}
endcode

code argD ffH sigH sigO clock clock_pol
	if (ffFJKG && nusers(sigH) == 2 &&
			(mul->type != \SB_MAC16 || !param(mul, \PIPELINE_16x16_MULT_REG2).as_bool())) {
		argD = sigH;
		subpattern(out_dffe);
		if (dff) {
			// H does not have a CE-like (hold) input
			if (dffholdmux)
				goto reject_ffH;

			// Reset signal of H (IRSTBOT) shared with B
			if ((ffBrstmux != NULL) != (dffrstmux != NULL))
				goto reject_ffH;
			if (ffBrstmux) {
				if (port(ffBrstmux, \S) != port(dffrstmux, \S))
					goto reject_ffH;
				if (ffBrstpol != dffrstpol)
					goto reject_ffH;
			}

			ffH = dff;
			clock = dffclock;
			clock_pol = dffclock_pol;
			sigH = dffQ;

reject_ffH:		;
		}
	}

	sigO = sigH;
endcode

match add
	if mul->type != \SB_MAC16 || (param(mul, \TOPOUTPUT_SELECT).as_int() == 3 && param(mul, \BOTOUTPUT_SELECT).as_int() == 3)

	select add->type.in($add)
	choice <IdString> AB {\A, \B}
	select nusers(port(add, AB)) == 2

	index <SigBit> port(add, AB)[0] === sigH[0]
	filter GetSize(port(add, AB)) <= GetSize(sigH)
	filter port(add, AB) == sigH.extract(0, GetSize(port(add, AB)))
	filter nusers(sigH.extract_end(GetSize(port(add, AB)))) <= 1
	set addAB AB
	optional
endmatch

code sigCD sigO cd_signed
	if (add) {
		sigCD = port(add, addAB == \A ? \B : \A);
		cd_signed = param(add, addAB == \A ? \B_SIGNED : \A_SIGNED).as_bool();

		int natural_mul_width = GetSize(sigA) + GetSize(sigB);
		int actual_mul_width = GetSize(sigH);
		int actual_acc_width = GetSize(sigCD);

		if ((actual_acc_width > actual_mul_width) && (natural_mul_width > actual_mul_width))
			reject;
		// If accumulator, check adder width and signedness
		if (sigCD == sigH && (actual_acc_width != actual_mul_width) && (param(mul, \A_SIGNED).as_bool() != param(add, \A_SIGNED).as_bool()))
			reject;

		sigO = port(add, \Y);
	}
endcode

match mux
	select mux->type == $mux
	choice <IdString> AB {\A, \B}
	select nusers(port(mux, AB)) == 2
	index <SigSpec> port(mux, AB) === sigO
	set muxAB AB
	optional
endmatch

code sigO
	if (mux)
		sigO = port(mux, \Y);
endcode

code argD ffO ffOholdmux ffOrstmux ffOholdpol ffOrstpol sigO sigCD clock clock_pol cd_signed o_lo
	if (mul->type != \SB_MAC16 ||
			// Ensure that register is not already used
			((param(mul, \TOPOUTPUT_SELECT, 0).as_int() != 1 && param(mul, \BOTOUTPUT_SELECT, 0).as_int() != 1) &&
			 // Ensure that OLOADTOP/OLOADBOT is unused or zero
			 (port(mul, \OLOADTOP, State::S0).is_fully_zero() && port(mul, \OLOADBOT, State::S0).is_fully_zero()))) {

		dff = nullptr;

		// First try entire sigO
		if (nusers(sigO) == 2) {
			argD = sigO;
			subpattern(out_dffe);
		}

		// Otherwise try just its least significant 16 bits
		if (!dff && GetSize(sigO) > 16) {
			argD = sigO.extract(0, 16);
			if (nusers(argD) == 2) {
				subpattern(out_dffe);
				o_lo = dff;
			}
		}

		if (dff) {
			ffO = dff;
			clock = dffclock;
			clock_pol = dffclock_pol;
			if (dffrstmux) {
				ffOrstmux = dffrstmux;
				ffOrstpol = dffrstpol;
			}
			if (dffholdmux) {
				ffOholdmux = dffholdmux;
				ffOholdpol = dffholdpol;
			}

			sigO.replace(sigO.extract(0, GetSize(dffQ)), dffQ);
		}

		// Loading value into output register is not
		//   supported unless using accumulator
		if (mux) {
			if (sigCD != sigO)
				reject;
			sigCD = port(mux, muxAB == \B ? \A : \B);

			cd_signed = add && param(add, \A_SIGNED).as_bool() && param(add, \B_SIGNED).as_bool();
		}
	}
endcode

code argQ ffCD ffCDholdmux ffCDholdpol ffCDrstpol sigCD clock clock_pol
	if (!sigCD.empty() && sigCD != sigO &&
			(mul->type != \SB_MAC16 || (!param(mul, \C_REG).as_bool() && !param(mul, \D_REG).as_bool()))) {
		argQ = sigCD;
		subpattern(in_dffe);
		if (dff) {
			if (dffholdmux) {
				ffCDholdmux = dffholdmux;
				ffCDholdpol = dffholdpol;
			}

			// Reset signal of C (IRSTTOP) and D (IRSTBOT)
			//   shared with A and B
			if ((ffArstmux != NULL) != (dffrstmux != NULL))
				goto reject_ffCD;
			if ((ffBrstmux != NULL) != (dffrstmux != NULL))
				goto reject_ffCD;
			if (ffArstmux) {
				if (port(ffArstmux, \S) != port(dffrstmux, \S))
					goto reject_ffCD;
				if (ffArstpol != dffrstpol)
					goto reject_ffCD;
			}
			if (ffBrstmux) {
				if (port(ffBrstmux, \S) != port(dffrstmux, \S))
					goto reject_ffCD;
				if (ffBrstpol != dffrstpol)
					goto reject_ffCD;
			}

			ffCD = dff;
			clock = dffclock;
			clock_pol = dffclock_pol;
			sigCD = dffD;

reject_ffCD: 		;
		}
	}
endcode

code sigCD
	sigCD.extend_u0(32, cd_signed);
endcode

code
	accept;
endcode

// #######################

subpattern in_dffe
arg argD argQ clock clock_pol

code
	dff = nullptr;
	for (auto c : argQ.chunks()) {
		if (!c.wire)
			reject;
		if (c.wire->get_bool_attribute(\keep))
			reject;
	}
endcode

match ff
	select ff->type.in($dff)
	// DSP48E1 does not support clock inversion
	select param(ff, \CLK_POLARITY).as_bool()

	slice offset GetSize(port(ff, \D))
	index <SigBit> port(ff, \Q)[offset] === argQ[0]

	// Check that the rest of argQ is present
	filter GetSize(port(ff, \Q)) >= offset + GetSize(argQ)
	filter port(ff, \Q).extract(offset, GetSize(argQ)) == argQ

	set ffoffset offset
endmatch

code argQ argD
{
	if (clock != SigBit()) {
		if (port(ff, \CLK) != clock)
			reject;
		if (param(ff, \CLK_POLARITY).as_bool() != clock_pol)
			reject;
	}

	SigSpec Q = port(ff, \Q);
	dff = ff;
	dffclock = port(ff, \CLK);
	dffclock_pol = param(ff, \CLK_POLARITY).as_bool();
	dffD = argQ;
	argD = port(ff, \D);
	argQ = Q;
	dffD.replace(argQ, argD);
	// Only search for ffrstmux if dffD only
	//   has two (ff, ffrstmux) users
	if (nusers(dffD) > 2)
		argD = SigSpec();
}
endcode

match ffrstmux
	if false /* TODO: ice40 resets are actually async */

	if !argD.empty()
	select ffrstmux->type.in($mux)
	index <SigSpec> port(ffrstmux, \Y) === argD

	choice <IdString> BA {\B, \A}
	// DSP48E1 only supports reset to zero
	select port(ffrstmux, BA).is_fully_zero()

	define <bool> pol (BA == \B)
	set ffrstpol pol
	semioptional
endmatch

code argD
	if (ffrstmux) {
		dffrstmux = ffrstmux;
		dffrstpol = ffrstpol;
		argD = port(ffrstmux, ffrstpol ? \A : \B);
		dffD.replace(port(ffrstmux, \Y), argD);

		// Only search for ffholdmux if argQ has at
		//   least 3 users (ff, <upstream>, ffrstmux) and
		//   dffD only has two (ff, ffrstmux)
		if (!(nusers(argQ) >= 3 && nusers(dffD) == 2))
			argD = SigSpec();
	}
	else
		dffrstmux = nullptr;
endcode

match ffholdmux
	if !argD.empty()
	select ffholdmux->type.in($mux)
	index <SigSpec> port(ffholdmux, \Y) === argD
	choice <IdString> BA {\B, \A}
	index <SigSpec> port(ffholdmux, BA) === argQ
	define <bool> pol (BA == \B)
	set ffholdpol pol
	semioptional
endmatch

code argD
	if (ffholdmux) {
		dffholdmux = ffholdmux;
		dffholdpol = ffholdpol;
		argD = port(ffholdmux, ffholdpol ? \A : \B);
		dffD.replace(port(ffholdmux, \Y), argD);
	}
	else
		dffholdmux = nullptr;
endcode

// #######################

subpattern out_dffe
arg argD argQ clock clock_pol

code
	dff = nullptr;
	for (auto c : argD.chunks())
		if (c.wire->get_bool_attribute(\keep))
			reject;
endcode

match ffholdmux
	select ffholdmux->type.in($mux)
	// ffholdmux output must have two users: ffholdmux and ff.D
	select nusers(port(ffholdmux, \Y)) == 2

	choice <IdString> BA {\B, \A}
	// keep-last-value net must have at least three users: ffholdmux, ff, downstream sink(s)
	select nusers(port(ffholdmux, BA)) >= 3

	slice offset GetSize(port(ffholdmux, \Y))
	define <IdString> AB (BA == \B ? \A : \B)
	index <SigBit> port(ffholdmux, AB)[offset] === argD[0]

	// Check that the rest of argD is present
	filter GetSize(port(ffholdmux, AB)) >= offset + GetSize(argD)
	filter port(ffholdmux, AB).extract(offset, GetSize(argD)) == argD

	set ffoffset offset
	define <bool> pol (BA == \B)
	set ffholdpol pol

	semioptional
endmatch

code argD argQ
	dffholdmux = ffholdmux;
	if (ffholdmux) {
		SigSpec AB = port(ffholdmux, ffholdpol ? \A : \B);
		SigSpec Y = port(ffholdmux, \Y);
		argQ = argD;
		argD.replace(AB, Y);
		argQ.replace(AB, port(ffholdmux, ffholdpol ? \B : \A));

		dffholdmux = ffholdmux;
		dffholdpol = ffholdpol;
	}
endcode

match ffrstmux
	if false /* TODO: ice40 resets are actually async */

	select ffrstmux->type.in($mux)
	// ffrstmux output must have two users: ffrstmux and ff.D
	select nusers(port(ffrstmux, \Y)) == 2

	choice <IdString> BA {\B, \A}
	// DSP48E1 only supports reset to zero
	select port(ffrstmux, BA).is_fully_zero()

	slice offset GetSize(port(ffrstmux, \Y))
	define <IdString> AB (BA == \B ? \A : \B)
	index <SigBit> port(ffrstmux, AB)[offset] === argD[0]

	// Check that offset is consistent
	filter !ffholdmux || ffoffset == offset
	// Check that the rest of argD is present
	filter GetSize(port(ffrstmux, AB)) >= offset + GetSize(argD)
	filter port(ffrstmux, AB).extract(offset, GetSize(argD)) == argD

	set ffoffset offset
	define <bool> pol (AB == \A)
	set ffrstpol pol

	semioptional
endmatch

code argD argQ
	dffrstmux = ffrstmux;
	if (ffrstmux) {
		SigSpec AB = port(ffrstmux, ffrstpol ? \A : \B);
		SigSpec Y = port(ffrstmux, \Y);
		argD.replace(AB, Y);

		dffrstmux = ffrstmux;
		dffrstpol = ffrstpol;
	}
endcode

match ff
	select ff->type.in($dff)
	// DSP48E1 does not support clock inversion
	select param(ff, \CLK_POLARITY).as_bool()

	slice offset GetSize(port(ff, \D))
	index <SigBit> port(ff, \D)[offset] === argD[0]

	// Check that offset is consistent
	filter (!ffholdmux && !ffrstmux) || ffoffset == offset
	// Check that the rest of argD is present
	filter GetSize(port(ff, \D)) >= offset + GetSize(argD)
	filter port(ff, \D).extract(offset, GetSize(argD)) == argD
	// Check that FF.Q is connected to CE-mux
	filter !ffholdmux || port(ff, \Q).extract(offset, GetSize(argQ)) == argQ

	set ffoffset offset
endmatch

code argQ
	if (ff) {
		if (clock != SigBit()) {
			if (port(ff, \CLK) != clock)
				reject;
			if (param(ff, \CLK_POLARITY).as_bool() != clock_pol)
				reject;
		}
		SigSpec D = port(ff, \D);
		SigSpec Q = port(ff, \Q);
		if (!ffholdmux) {
			argQ = argD;
			argQ.replace(D, Q);
		}

		for (auto c : argQ.chunks()) {
			Const init = c.wire->attributes.at(\init, State::Sx);
			if (!init.is_fully_undef() && !init.is_fully_zero())
				reject;
		}

		dff = ff;
		dffQ = argQ;
		dffclock = port(ff, \CLK);
		dffclock_pol = param(ff, \CLK_POLARITY).as_bool();
	}
	// No enable/reset mux possible without flop
	else if (dffholdmux || dffrstmux)
		reject;
endcode