Now it returns `resource not available`
Change-Id: Ifbbd468bdf62023850690eb96fe8a16f4114e915
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Compilers are good at optimizing, and with functions it's abundantly
clear what all the types involved are. This change means we don't have
to be super careful about the type of values because of what the macro
might do to them that might cause overflow.
The only place where the return type matters is in printf-style
functions, and I made get_value32() for those cases where a change was
needed.
This should set the stage for simply copying the latest debug_defines.h
from the debug spec build again.
Change-Id: I5fb19d0cfc1e20137832a7b344b05db215ce00e1
Signed-off-by: Tim Newsome <tim@sifive.com>
By definition in `target/target.h`, `coreid` is not a unique identifier
of a target -- it can be the same for targets on different TAPs.
Change-Id: Ifce78da55fffe28dd8b6b06ecae7d8c4e305c0a2
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This patch replaces ~(typeof(watchpoint->mask))0 with
WATCHPOINT_IGNORE_DATA_VALUE_MASK. This improves
readability and moves the RISCV target in line with
other targets.
Change-Id: I15ac4d4ee76098b304d9b22f720911ba4329c190
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Depending on configuration, the existing implementation of watchpoints is
rather inefficient for certain scenarios. Consider HW that:
1. triggers 0-3 can be used as instruction breakpoints
2. triggers 4-7 can be used as data breakpoints (watchpoints)
3. NAPOT triggers are not supported.
Now, consider that we have a pending watchpoint. And we perform a "step"
operation. According to the current implementation:
* OpenOCD will disable watchpoints
* Perform a single-step
* Will try to restore the original watchpoints. It will need 12 attempts
to find a suitable trigger: (8 attempts to try NAPOT, and another 4 to try
GE+LE).
This patch introduces a dedicated cache for requests to triggers. It
significantly speeds things up, since we cache failed attempts and no
additional interactions with HW is necessary.
Change-Id: Ic272895eaa763a7ae84d14f7633790afd015ca9d
Signed-off-by: Anastasiya Chernikova <anastasiya.chernikova@syntacore.com>
Otherwise it won't compile for me. Not sure why that doesn't affect the
automated builds.
Change-Id: Ic66c743e1698c4c0772e5601723cb5c711b4fa5c
Signed-off-by: Tim Newsome <tim@sifive.com>
Since DPC is WARL (same rules as MEPC according to
the specification), it is possible that
writes to it won't result in the exact value present.
Therefore, writes to it shouldn't be cached, same as
with other WARL registers.
Change-Id: I818c0cef9727b999b7d84b19f9f42cd706c99d69
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Added the ability to enter dimensionless registers
Change-Id: I1b781959ce4690ec65304142bd9a7c6f540b3e86
Signed-off-by: Anastasiya Chernikova <anastasiya.chernikova@syntacore.com>
Now:
1) If mmu is disabled, virt2phys succeeded and returns physical address
2) If mmu is enbaled, but translation fails, read/write_memory fails
Change-Id: I312309c660239014b3278cb77cadc5618de8e4de
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Add a new riscv specific commands to disable triggers
Change-Id: Ic1842085aa66851c740e0abcbfbe0adbe930920e
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Extend riscv set_ebreak* commands.
Now it can be called without args to print current value.
riscv_ebreak* flags are moved to riscv_info struct.
Change-Id: Ib46e6b6dfc0117599c7f6715c7aaf113e63bd7dc
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
`riscv_debug_reg_to_s()` can be used to decode register value. If the
pointer to buffer is `NULL` it does not print anything, just returns the
length of the string.
The format is:
`<register_value> { <field_name>=<field_value_name or field_value>, ..., }`
e.g:
`0x400382 { version=2, ... ndmresetpending=false, }`
`0x321009 { regno=0x1009, ... cmdtype=0, }`
Change-Id: I63733d8d36385d89ca15de1a43139134bc488c4f
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
When the target isn't halted, simply return an error. This used to be
purely internal code so an assert was appropriate. Now after some
refactoring and with unavailable harts you could get here when the hart
is unavailable. In that case the right thing is simply to return an
error message.
Change-Id: I49d26a11fe7565c645fd2480e89a2c35ea9b1688
Signed-off-by: Tim Newsome <tim@sifive.com>
This patch disables software breakpoints of size 2 for targets
which don't support compressed instructions.
Change-Id: I8200b22a51c97ba2aa89e6328beadde8dd35cdd5
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
During a previous patch, the ignoring of writes to register zero
was deleted. This patch restores it to the original.
Change-Id: Ieb028a5b2e3f691e4847713c7bc809e10726e18c
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Lot of messages was logged as LOG_WARNING, but the operation failed
immediately. Sometimes no error message was logged at all.
Add missing messages, change warnings to errors.
Sometimes ERROR_TARGET_INVALID was returned. Some command handlers
returned ERROR_OK! Always return ERROR_TARGET_NOT_HALTED.
While on it use LOG_TARGET_ERROR() whenever possible.
Prefix command_print() message with 'Error:' to get closer
to LOG_TARGET_ERROR() variant.
Error message was not added to get() and set() methods of
struct xxx_reg_type - the return value is properly checked and a message
is logged by the caller in case of ERROR_TARGET_NOT_HALTED.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I2fe4187c6025f0038956ab387edbf3f461c69398
Reviewed-on: https://review.openocd.org/c/openocd/+/7819
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch adds target logging to logging instances where it makes sense.
This is especially useful when debugging multiple targets at once,
such as multicore systems.
Change-Id: Ia9861f3fa0e6e5908b683c2a8280659c3c264395
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Besides checkpatch, now upstream codes are scanning with
Sparse semantic checker tool.
This commit addresses some Sparse and checkpatch warnings.
Change-Id: I0e3e9f15220d8829c5708897af27aa86a8f90c07
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
* Add a warning when eq trigger is setup and it's behavior is different
from other triggers.
* Make eq trigger's behavior consistent with other triggers in case of
length == 1.
* Fix a bug in setting chained triggers (LT, GT case).
* Improve logging.
Change-Id: Id1ed0d11971b8ed875afbb979e6c8a8b51dd3818
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
According to section 5.6 in the RISC-V debug specification, the previous
way to set triggers was incorrect, as was discussed as part of
https://github.com/riscv/riscv-openocd/issues/870. This commit fixes the
sequence to be in line with the specification as well as adds some comments
to clarify for any future reader as to what is actually done.
Change-Id: Iffc5cc0f866a466a7aaa72a4c53ee95c9080ac9d
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
this functionality allows to query if a target belongs to some smp group
and to dynamically turn on/off smp-specific behavior
Change-Id: I469453d95e7c1640a91bc60d80c854404e508535
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
With this change, failures to resume a hart due to it not being halted
are more explicitly logged or reported as an error.
Change-Id: Ia55d8df85a908363d0f2140637ce1e47c1ab6251
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Intended as a place where we can interact with the target without too
much concern about preserving state and doing exactly the right thing
while poll() is going on.
Change-Id: Ic9bd441caae85901a131fd45e742599803df89b5
Signed-off-by: Tim Newsome <tim@sifive.com>
Specifically, call into the RISC-V version when target becomes halted,
running, or unavailable.
I'll be using unavailable shortly.
Change-Id: I9ffffdccbf22e053fe6390d656b362bf9ab9559a
Signed-off-by: Tim Newsome <tim@sifive.com>
The riscv013_on_halt function was being called but its implementation was
empty, providing no additional functionality. Removed the function declaration,
calls to it, and its implementation since it is not required.
Change-Id: I425ea890deadeec945f0a47af247f3f99172e801
Signed-off-by: Tim Newsome <tim@sifive.com>
Previously, progbuf execution did not flush or invalidate the register cache which could lead to incorrect behavior. This patch fixes it as well as refactors few sore points in the code related to it.
Change-Id: I353b931ca70a1828d4a9cc512aead00441730875
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Change the prototype of functions:
- target_run_algorithm()
- target_wait_algorithm()
- target_wait_state()
- struct target_type::run_algorithm()
- struct target_type::wait_algorithm()
to use unsigned int for timeout_ms instead of int.
Change accordingly the variables passed as parameter.
Change-Id: I0b8d6e691bb3c749eeb2911dc5a86c38cc0cb65d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7562
Tested-by: jenkins
This commit introduces a new function, which can be used to reduce number
of register accesses.
Change-Id: I125809726eb7797b11121175c3ad66bedb66dd0d
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Since writing a register can make some GPRs dirty (e.g. S0, S1), registers
should be flushed in reverse order, so GPRs are flushed last.
Change-Id: Ice352a4df4ae064619c0f9905db634a7b57e4711
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Below warnings are fixed.
1- A function declaration without a prototype is deprecated in all
versions of C [-Werror,-Wstrict-prototypes]
2- error: variable set but not used [-Werror,-Wunused-but-set-variable]
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I1cf14b8e5e3e732ebc9cacc4b1cb9009276a8ea9
Reviewed-on: https://review.openocd.org/c/openocd/+/7569
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
If hart can't change pc (e.g. it is running), resume command should
fail.
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: I14627366d574d806ea16262b7d305d8161f8bcc2
No other attempt is made at doing anything hypervisor-specific. Are
other things necessary?
Change-Id: Ib65f114888840cf0878f9bfe028c9a42b436aa3f
Signed-off-by: Tim Newsome <tim@sifive.com>
Icount triggers don't have a maskmax field at all. This is a cut and
paste error.
Change-Id: I001b3d41bf683599706dba713f7be475e8dd1668
Signed-off-by: Tim Newsome <tim@sifive.com>
When permission bits R, W, and X in PTE all three are zero,
the PTE is a pointter to the next level of the page table;
otherwise, it is a leaf PTE. Here PTE_W is missed.
Change-Id: I82a4cc4e64280f0fcad75b20e51b617520aff29b
Signed-off-by: panciyan <panciyan@eswincomputing.com>
Untested, because I don't have a target that implements this.
Change-Id: Iff82c124e7caf8e8960a9da62d8e727afb2c6b8a
Signed-off-by: Tim Newsome <tim@sifive.com>
It is possible for triggers of the same type to support different match
field values, so it is needed to try all the triggers, not just the
first one.
Fixes issue #788.
Signed-off-by: Evgeniy Naydanov evgeniy.naydanov@syntacore.com
Change-Id: I4c9fbc98bae7259377456d9ad8e770232724a592
* target/riscv: hide_csrs configuration option
This option allows users to mark certain CSRs as hidden so they could be
expluded from *reg* output and target.xml
Change-Id: Iddf8456cd3901f572f8590329ebba5229974d24a
* Update doc/openocd.texi
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
---------
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
* Add command "exec_progbuf"
Command "exec_progbuf" allows to execute a user-specified sequence
of instructions using the program buffer.
Change-Id: If3b9614129d0b6fcbc33fade29d3d60b35e52f98
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
* Updated the doc:
- Minor reword and reorder of the sentences.
- Added information about C-instructions in progbuf.
- Fixed a typo (per the review).
- Added examples.
Change-Id: I88c9a3ff3c6b60614be7eafd3a6f21be722a77b7
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
* Cosmetic changes
Change-Id: I7135c9f435f640e189c7d7922a2702814dfd595f
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
---------
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Co-authored-by: Jan Matyas <jan.matyas@codasip.com>
Also refactor shared code for clearing itrigger/etrigger/icount.
Change-Id: Iac2e756332c89d2ed43435391e3c097abc825255
Signed-off-by: Tim Newsome <tim@sifive.com>
This should make vector accesses work on 64-bit harts that implement
Zve32*. There doesn't appear to be any way to easily determine what vsew
values are allowed, so try and notice the failure.
Change-Id: Ide0722d0d67da402a4fbe88163830094e46beb84
Signed-off-by: Tim Newsome <tim@sifive.com>
This command is supposed to be a start at a compliance test for system
bus access. It doesn't pass against spike because it doesn't handle all
cases where the interface might be busy. It's not documented. As far as
I know nobody uses it.
So delete 400 lines of code instead of trying to fix it.
Change-Id: Ib94f2acb95a48f7c07d4f44206ff7373b03857f3
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Tim Newsome
Kirill Radkin
Evgeniy Naydanov
Marek Vrbka
Anastasiya Chernikova
liangzhen
Parshintsev Anatoly
Tomas Vanek
Mark Zhuang
Erhan Kurubas
Antonio Borneo
panciyan
Anatoly Parshintsev
Jan Matyas