* added views for each step of generating final caravel.gds
* generated the right caravel and caravel-eco gds
* renamed caravel_signoff and removed caravel-non-eco
Co-authored-by: Marwan Abbas <marwan@ciic.c.catx-ext-efabless.internal>
* reharden: caravel
~ shift caravel_clocking due to change in size
~ change the pr boundary of caravel_power_routing mag file
~ regenarate lef of caravel_power_routing
* update pdn for `caravel_clocking` & `digital_pll`
* added script to update and generate the power routing views
* ~ run update_power_routing_views from the caravel root with prboundary
* fix output message
* added power routing lef, mag and gds
* fix update_power_routing_views saving wrong cell name
* reharden: caravel
~ incorperate pdn changes
~ re-extract spefs
* fix caravel_power_routing views
* fix abs path in maglef views
* fix abs path in mag views
add substcut layers in gpio_control_block and mgmt_protect
* generate a new chip_io gds
* regenerate gpio_control_block due to mag and gds not in sync
* reharden: caravel
~ change config to pass clean routing
~ use updated views of macros
* lvs clean views
* add caravel top-level generated sdf for all corners
* fix absolute path for mgmt_core_wrapper
Co-authored-by: kareem <kareem.farid@efabless.com>
Co-authored-by: Bassant Hassan <bassant.hassan@efabless.com>
~ increase width for more spread decaps
+ add or cells to cell exclude
~ change placement density in accordance to area
~ change padding to allow for space for decaps
~ increase height for more spread decap insertion
+ add or cells to cell exclude
~ adjust pdn to have an offset half to pitch
~ change placement density in accordance to area
~ change padding to allow for space for decap insertion
~ enable synth buffering to fix fanout
~ add *buf_1* to no synth list
~ add attribute (* keep *) to the oscillator as dont
touch for yosys
!need to verify that the oscillator remains untouched
being buffered pass through the buffer macros. Removed the
straight-through signals from the layout, and renumbered the
vectors in the buffer cells, which no longer match the numbering
at the top level (unfortunately).
above housekeeping, because the upper GPIO pins are in the wrong
place relative to the new GPIO signal routing below the SoC.
Added pins for the pass-through connections. Unconnected/
unrouted OEB pins are still not present and probably should be
removed from the RTL.
Corrected one instance where a buffer had incorrectly been replaced
with a decap cell. Moved the left-hand side in by 0.6um to clear
the chip_io connections on the left-hand side. Corrected a small
DRC error in a route position at the bottom.
based on feedback from tim in order to generate a lef view
with a zero origin and avoid any hacks
+ add caravel_power_routing lef
+ sync caravel_power_routing gds and mag
Marwan Abbas
marwaneltoukhy
kareem
mo-hosni
Tim Edwards
Mohamed Shalan
Passant