Commit Graph

434 Commits

Author SHA1 Message Date
zwelch b619b7466f David Brownell <david-b@pacbell.net>:
Convert the str9xpec driver info to use @deffn; alphabetize;
add the missing part_id command.

Convert the mflash support to use @deffn; alphabetize.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2034 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-04 00:51:02 +00:00
zwelch 2d0e1dbc02 Improve remaining documentation that was causing Doxygen warnings.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2026 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-03 04:44:38 +00:00
zwelch 6c39b5dd52 Add architectural introduction to the JTAG module in The Manual.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2024 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-03 02:57:55 +00:00
zwelch 003318b911 Add draft of Patching Primer in The Manual; update primer page.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2021 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-03 02:12:44 +00:00
zwelch 49a22dbf98 David Brownell <david-b@pacbell.net>:
Update docs for most of the remaining commands in jtag.c:

 - switch to @deffn
 - these are just the "low level" JTAG commands
 - resolve much goofage!
    * remove docs for non-existent commands
    * add missing docs for some existing commands
    * fix incorrect docs for some commands
 - just index TAP states overall, not individually
 - current name is "RUN/IDLE" not "IDLE"

Cross checked against the source.

This also creates an "Interface Drivers" section, analagous to how
(NOR) Flash and NAND drivers are presented; that's not yet sorted.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2014 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-03 00:59:13 +00:00
zwelch 5ca513a097 David Brownell <david-b@pacbell.net>:
Rework the TAP creation documentation.

 - Try to use "TAP" not "tap" everywhere; it's an acronym.

 - Update the associated "target config files" section:
     * reference the "TAP Creation" chapter for details
     * simplify:  reference interesting multi-tap config files
     * let's not forget CPU configuration (*before* workspace setup)
     * streamline it a bit
     * move that workspace-vs-mmu issue to a better location

 - Clean up TAP creation doc mess
     * switch to @deffn
     * (re)organize the remaining stuff
     * reference the "Config File Guidelines" chapter

 - Tweak the "Target Configuration" chapter
     * rename as "CPU configuration"; unconfuse vs. target/*.cfg
     * bring out that it's not just there for GDB
     * move TAP events to the TAP chapter, where they belong (bugfix)


git-svn-id: svn://svn.berlios.de/openocd/trunk@2013 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-03 00:56:50 +00:00
ntfreak 7dc29156fe - change signature for adi_jtag_dp_scan and adi_jtag_dp_scan_u32 to use swjdp_common_t *swjdp instead of arm_jtag_t *jtag_info
- change SWJDP_IR/DR_APACC to DAP_IR/DR_APACC to conform with ARM_ADI docs.
- add swjdp->memaccess_tck field and code for extra tck clocks before accessing memory bus
- Set default memaccess value to 8 for Cortex-M3.
- Add dap memaccess command.
- document all armv7 dap cmds.
- Original patch submitted by Magnus Lundin [lundin@mlu.mine.nu].

git-svn-id: svn://svn.berlios.de/openocd/trunk@2005 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-02 21:06:12 +00:00
zwelch 4caa72b988 David Brownell <david-b@pacbell.net>:
Remove two sections about deprecated/removed commands, documenting
them briefly in the chapter on deprecated/removed commands.  The
"working_area" command just duplicated text; "jtag_device" wasn't
listed in that chapter before.

Also start de-emphasizing those commands.  Don't index them, and
include a disclaimer that their documentation may start to vanish
about a year after the code does (e.g. in January 2010).


git-svn-id: svn://svn.berlios.de/openocd/trunk@1986 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-01 23:09:19 +00:00
zwelch ddc9fd7274 David Brownell <david-b@pacbell.net>:
Uplevel the arch commands to be a chapter; they really
don't fit in the "general commands" category.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1977 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-01 03:06:46 +00:00
zwelch 30fca8e531 David Brownell <david-b@pacbell.net>:
Fix minor goofage in previous doc updates:

 * The ETM dummy driver name is "dummy" not "etm_dummy";
   re-alphabetize.

 * DCC trace message mode "charmsg" is a format type
   (and what Linux needs)


git-svn-id: svn://svn.berlios.de/openocd/trunk@1976 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-01 03:06:25 +00:00
zwelch a066529fa5 David Brownell <david-b@pacbell.net>:
Various updates, mostly small/formatting changes:

 * Small content tweaks:
    - Re-title:  "OpenOCD User's Guide".
    - For users, URLS for latest doc and SparkFun forum
    - Mention GIT-SVN
 * Fix some front-matter goofage, matching texinfo docs:
    - "paragraphintent" location matters
    - put release version/date description with the copyright
 * Fix some other stuff matching texinfo docs:
    - no tabs
    - tweak some refs and anchors
 * whitespace-at-end-o-line fixes


git-svn-id: svn://svn.berlios.de/openocd/trunk@1975 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-01 03:06:11 +00:00
zwelch cc639cc44c Add new JTAG boundary scan primer, with links to BSDL information.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1954 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-31 00:49:03 +00:00
oharboe d12a47d558 added some comments on meminfo command
git-svn-id: svn://svn.berlios.de/openocd/trunk@1948 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-30 07:56:14 +00:00
oharboe aea132ca48 more reset_config texts
git-svn-id: svn://svn.berlios.de/openocd/trunk@1947 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-30 07:53:40 +00:00
zwelch 91d55c0e50 David Brownell <david-b@pacbell.net>:
Provide basic documentation on the ARM ETM and ETB trace commands.

Fix minor goofs in registration of the ETM commands; and whitespace
issues in the proof-of-concept oocd_trace code.  (Plus include a
ref to Dominic's email saying that it's just proof-of-concept code.)

Note that I'm still not sure whether the ETM support works.  But
documenting how it's expected to work should help sort out which
behaviors are bugs, which will help get bugs patched.

ZW: whitespace changes were split out of this patch but will follow.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1945 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-30 01:43:21 +00:00
zwelch d00a5cfe97 David Brownell <david-b@pacbell.net>:
Make it so the magic "reset_config" keywords can be provided in any
order.  This eliminates needless error paths, and makes it easier
to define things at the right level (adapter, board, target).
It also includes two other behavioral changes:

  (1)	When "handle_reset_config" sees a parameter error, it
  	exits without changing anything.   This is best viewed
	as a bugfix.  (Old behavior:  restore defaults, even if
	they weren't previously active.)

  (2)	Only the behaviors that were explicitly specified get
  	changed.  (Old behavior:  everything else gets reset to
	the "default".)  So for example you can now specify SRST
	drive requirements without saying anything about the
	three unrelated topics you previously had to specify.

That second one might cause confusion for any configs that end
up calling "reset_config" twice, so it will deserve to be called
out in the release notes.  (There were no such configurations in
the current OpenOCD source tree.)

Update docs accordingly.  Note that at least some versions of
the texi-to-html tools can't handle "@xref{with spaces}", but
those work properly in PDF and in the info files.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1944 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-30 01:32:19 +00:00
zwelch 80856c1e34 David Brownell <david-b@pacbell.net>:
Provide basic documentation for some of the other flash drivers.

 avr ... looks incomplete, may work with one AVR8 microcontroller
 ecosflash ... can't find docs
 lpc288x ... an NXP part, driver seems lpc2888-specific
 ocl ... some arm7/arm9 thing, can't find docs
 pic32mx ... looks incomplete, for PIC32MX (MIPS 4K) devices
 tms470 ... for TI TMS470 parts

Still seems to be mostly arm7tdmi... several of these have no
users in the current tree.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1941 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-29 01:33:04 +00:00
zwelch ea62c7964a David Brownell <david-b@pacbell.net>:
Start converting the architecture-specific commands to @deffn format,
reviewing against the code.

  * armv4_5 disassemble ... now documented; although Jazelle code
    is not handled

  * It's "armv4_5 core_state" not "core_mode"; although Jazelle state
    is not handled

  * arm7/9 "debug" commands ... now with other arm7_9 commands, no
    longer in a separate section

  * arm926ejs cp15 ... previous description was broken, it matched
    the code for arm920t instead

  * Have separate subsections for ARMv4/ARMv5, ARMv6, and ARMv7; the
    latter are new
    
  * Move core-specific descriptions into sub-subsections under those
    architectures; XScale and ARM11 descriptions are new

The new XScale and ARM11 command descriptions surely need elaboration
and review.  ARM CP15 operation descriptions in general seem to be
confused and incomplete.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1939 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-28 23:13:32 +00:00
zwelch 6149c509ca David Brownell <david-b@pacbell.net>:
Continue updating the NOR flash coverage to use @deffn syntax, so the
commands have more consistent presentation and formatting.  This
reorganizes information and updates its presentation, except where
the information didn't really match the code.

This patch updates the main commands, and finishes making the section
structure parallel the NAND presentation.  Of note:

 - The "flash fill[whb] addr value length" commands are now documented.

 - The "flash bank" command is now presented much earlier

 - Explicit mention is made that NOR flash should be read using just
   standard memory access commands, like "mdw" and "dump_image".



git-svn-id: svn://svn.berlios.de/openocd/trunk@1938 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-28 01:18:47 +00:00
zwelch f37a8136fe David Brownell <david-b@pacbell.net>:
Start updating the NOR flash coverage to use @deffn syntax, so the
commands have more consistent presentation and formatting.  This
reorganizes information and updates its presentation, except where
the information didn't really match the code.

This patch updates most of the driver specific support, creating one
new (and alphabetized!) section just for driver-specific data, where
previously that data was split over up to three sections.  Of note:

 - The at91sam7 docs were a bit out of date with respect to the code.

 - The "str9xpec" stuff still deserves some work.  For now, it sits
   in its own subsection; pretty messy.

 - Likewise the "mflash" stuff.  That's a parallel infrastructure,
   and is now in a section of its own.

 - The "mass_erase" commands for the Cortex M3 chips got turned into
   footnotes.  IMO, they should vanish sometime; they're superfluous.

 - There are still a bunch of undocumented NOR drivers.  Examples:
   avr(8), tms470, pic32mx, more.

Plus there are a handful of minor tweaks to the NAND docs (to help make
the NOR and NAND presentations be parallel); the "Command Index" has
been renamed as the "Command and Driver Index"; reference TI instead
of Luminary Micro in several places.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1937 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-28 01:11:10 +00:00
zwelch d9284c0611 David Brownell <david-b@pacbell.net>:
Fix a bunch of PDF generation bugs in the texi:

 * The "overfull" warnings are basically complaints about lines
   that are too long, so they ran off the right margin of the
   PDF documentation and turn into a "black blot".

 * The "underfull" warnings are basically complaints about lines
   that look ugly when they get filled, because the tokens are
   so long that the line-break algorithm can't do anything good.

In a few cases the simplest fix seemed to be to use more appropriate
texi commands.

In other cases the fix was a content bugfix:  "ocd_" not "openocd_";
and many of those "target variants" actually aren't recognized.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1936 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-28 00:47:30 +00:00
zwelch afa77f8672 Numerous minor updates and fixes for The Manual:
- Link Scripting Overview into the TCL Primer; both need more work.
- Remove redundant OpenOCD from Scripting Overview subpage title.
- Fix incorrect tag in Doxygen style guide example.
- Fix minor typo in first introductory paragraph of main page.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1932 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-27 15:15:06 +00:00
zwelch ee9766f1db unsik Kim <donari75@gmail.com>:
Add mflash configuration code, updating relevant documentation.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1930 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-27 12:30:42 +00:00
zwelch 2caf8655b5 unsik Kim <donari75@gmail.com>:
Remove unused mflash bank command options.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1928 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-27 12:20:13 +00:00
ntfreak ff2737b429 - add support for cortino jtag interface
git-svn-id: svn://svn.berlios.de/openocd/trunk@1925 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-27 11:58:19 +00:00
zwelch edab91e576 Add new Style Guides for languages used (and to be used) by project.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1924 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-27 10:44:03 +00:00
zwelch 43ea8d9179 Link new Primer pages into the main list of Primers.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1923 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-27 10:40:52 +00:00
zwelch c71f891f2e Add Documentation Primer to The Manual.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1922 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-27 10:35:20 +00:00
zwelch eedfcb2cbe Add draft of Autotools Primer to The Manual.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1921 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-27 10:27:32 +00:00
zwelch 83902cc984 David Brownell <david-b@pacbell.net>:
Update the "Reset Configuration" information in the User's guide:

 - Convert to @deffn syntax
 - Move tutorial text from command descriptions into new sections
 - Describe several different types of JTAG-visible reset
 - Expand descriptions of configuration tweaks for SRST and TRST 
 - Link to the "reset" command, and vice versa
 - Bugfix the "reset_config" description (it didn't match the code)

Plus, be more proscriptive:  do it in board config files, except for
the oddball cases where that won't work. (Current target.cfg files
seem to have much goofage there; several seem board-specific.)


git-svn-id: svn://svn.berlios.de/openocd/trunk@1913 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-26 00:23:23 +00:00
zwelch ad8f1b4295 David Brownell <david-b@pacbell.net>:
Doc (mostly) update for jtag_khz:
 - switch to @deffn syntax
 - add entry for "jtag_rclk"
 - move deprecated "jtag_speed" into collection of deprecated calls

And for ft2232, don't be the only adapter to *log* an error if RTCK
is requested; it's already reported properly, like any other nonfatal
command parameter.  "jtag_rclk" just works as expected, without any
scarey messages.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1910 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-24 21:13:29 +00:00
zwelch 5ecae346cc David Brownell <david-b@pacbell.net>:
Make startup for the various server ports be quiet, unless
debugging is active:  don't emit needless scarey messages.
Update the relevant documentation and its references:

 - For these port commands ... cover the default values;
   convert to @deffn syntax; include their use outside of
   the configuration stage; and alphabetize.

Similar updates to the rest of that small chapter:

 - Highlight that there even *IS* a configuration stage, after
   which some command functionality is no longer available.

 - For GDB commands ... convert to @deffn syntax; alphabetize;
   include a missing command (!); add missing helptext (!) for
   one non-missing command; update relevant cross-references
   and index entries.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1909 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-24 21:08:42 +00:00
zwelch eb385b2e70 David Brownell <david-b@pacbell.net>:
Update two oddball NAND commands to work with {offset, length}
instead of block numbers, matching the other commands as well
as usage in U-Boot and the Linux-MTD utilities.

Document them accordingly.  Update the single in-tree use of
those commands (sheevaplug).

ALSO:

 (a) Document the current 2 GByte/chip ceiling for NAND chipsize.
     (32 bit offset/length values can't represent 4 GBytes.)  Maybe
     after the upcoming release, the code can switch to 64-bits.

 (b) The "nand check_bad_blocks" should report "bad" blocks.  They
     are not "invalid" blocks; they're "bad" ones.

 (c) Tweak the "nand info" command to handle the "no arguments"
     case sanely (show everything, instead of showing garbage) and
     not listing the blocksize in hex kbytes (duh).


git-svn-id: svn://svn.berlios.de/openocd/trunk@1904 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-24 01:57:13 +00:00
zwelch c0fc8f93f1 David Brownell <david-b@pacbell.net>:
NAND support for DaVinci-family drivers, with HW ECC support.
Declare the NAND chip on the DM355 EVM board.

Currently tested on DM355 for Linux interop using the standard
large page (2KB) chip in the EVM socket; "hwecc1" and "hwecc4"
work fine.  (Using hwecc4 relies on patches that haven't quite
made it through the Linux-MTD bottlenecks yet.)

Not yet tested:  1-bit on small-page (although it's hard to see
how that could fail); 4-bit on small page (picky layout issues);
the "hwecc_infix" mode (primarily for older boot ROMs; testing
there is blocked on having new bootloader code).


git-svn-id: svn://svn.berlios.de/openocd/trunk@1903 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-24 01:38:19 +00:00
zwelch 67dd29a4af Fix two problems with openocd.texi:
- Fix minor issues with xrefs not liking parentheses around them.
- Change 'Building' section to 'Building OpenOCD'.  It reads better.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1902 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-24 01:33:54 +00:00
zwelch 045362d74a Add section identifiers to developer scripting introduction.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1898 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-23 22:53:39 +00:00
zwelch 08d5f114c9 Update main page of doxygen developer documentation:
- Rewrite copy to give a better introduction and overview.
- Add subpages: The List, Style Guide, Patch Policies, and Bug Reporting.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1897 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-23 22:52:47 +00:00
zwelch 3131636492 Add extended doxygen-based style guide draft; requires more work.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1896 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-23 22:39:03 +00:00
zwelch a0f9869030 Update user guide documentation:
- Remove style guide from user guide; moved to doxygen manual.
- Replace with improved introduction for developers and packagers.
- Move introductory paragraph about the project under the About page.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1895 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-23 22:37:19 +00:00
zwelch 61c77af0ab Submitted by David Brownell <david-b@pacbell.net>:
Add a "NAND Commands" section to to the TEXI docs, covering the basic
commands except for those previously discussed as being due for removal
("nand copy") or switching to use byte offsets not block numbers.

This uses the "@deffn..." syntax for defining commands, as somewhat
suggested by the TEXI documentation, and adds a new "Command Index".
We might prefer to merge those indexes for the near term, but I think
the "@deffn" approch is probably worth switching to.

Updates a few other bits to clarify that "flash" doesn't just mean NOR.  
And to fix one niggling falsity:  the "reset-init" event *is* used, and
in fact it's quite important.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1879 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-22 02:25:18 +00:00
zwelch 8686a33807 Add initial OpenOCD server documentation (Duane Ellis and myself).
git-svn-id: svn://svn.berlios.de/openocd/trunk@1857 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-20 09:01:01 +00:00
zwelch 5a080c8f6e Add new TCL Primer under the main Technical Primer page.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1856 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-20 08:58:09 +00:00
zwelch c46dc5ba2d Move TCL overview from source tree to doxygen manual.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1855 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-20 08:48:19 +00:00
zwelch 5545aca4d7 Fix doc/Makefile.am dist-hook to include all sections of manual.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1854 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-20 08:44:37 +00:00
zwelch ed294121ef Move non-arm target overview from source tree to doxygen manual.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1853 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-20 08:43:18 +00:00
zwelch 2cca6fcb8b Move scripting overview from source tree to doxygen manual.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1852 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-20 08:16:50 +00:00
zwelch 5fe786f166 Wookey <wookey@wookware.org>: add user documentation for echo command.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1839 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-19 18:30:01 +00:00
kc8apf 6416474891 Relocate documentation on working area to better align with use of new syntax. Provided by David Brownell <david-b@pacbell.net>
git-svn-id: svn://svn.berlios.de/openocd/trunk@1806 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-18 04:47:06 +00:00
kc8apf c977616cda Consolidate target selection code into single get_target() that handles both names and numbers. Provided by David Brownell <david-b@pacbell.net>
git-svn-id: svn://svn.berlios.de/openocd/trunk@1804 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-18 04:44:28 +00:00
kc8apf cafad4969c ETM/ETB documentation from David Brownell <david-b@pacbell.net>
git-svn-id: svn://svn.berlios.de/openocd/trunk@1803 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-18 04:40:11 +00:00
zwelch 8ed887456d Add current draft of The List of Pending and Open Tasks.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1791 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-15 00:49:30 +00:00
zwelch 30f6b1ebbc Several minor fixes for the new doxygen manual.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1789 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-14 22:16:20 +00:00
zwelch 7626139950 Add JTAG Primer to doxygen manual, contributed by Strontium.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1776 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-13 11:10:35 +00:00
zwelch 624aa80f84 Commit skeleton files for high-level developer manual using doxygen.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1771 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-13 08:58:08 +00:00
oharboe 9b7bd65883 stm32.cfg can expect one of 4 id's.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1516 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-04-23 14:03:42 +00:00
ntfreak aed582e422 - add openocd coding style to texi
git-svn-id: svn://svn.berlios.de/openocd/trunk@1454 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-04-03 12:55:25 +00:00
oharboe 03caa01ae5 a few words about motivation for standalone JTAG debugger.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1434 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-03-30 13:35:38 +00:00
ntfreak d2189fdfe6 - fix typo's in last commit
git-svn-id: svn://svn.berlios.de/openocd/trunk@1433 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-03-24 12:09:54 +00:00
oharboe f7f37ea289 Hiroshi Ito <ito@mlb.co.jp> Linux for arm has arm generic debug option which send debug messages via
DCC channel.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1432 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-03-24 11:27:49 +00:00
oharboe 0cfcd0bc9b Uwe Hermann <uwe@hermann-uwe.de>
- Explicitly mention autoconf >= 2.59 as requirement (as per
  configure.in). Also automake >= 1.9 (though I'm not sure which
  if that's really the minimum requirement).

 - Document various missing configure options.

 - Fix various typos and inconsistencies.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1426 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-03-23 07:43:46 +00:00
ntfreak 39423e9856 - docs patch from Thomas Kindler
git-svn-id: svn://svn.berlios.de/openocd/trunk@1422 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-03-20 13:27:02 +00:00
ntfreak 0b26e59b01 - revert texi changes from rev 1418 as it breaks build
- original patch will be reviewed before next commit

git-svn-id: svn://svn.berlios.de/openocd/trunk@1420 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-03-20 10:29:12 +00:00
oharboe af6d1db2fb Thomas Kindler <mail+ocd@t-kindler.de> typos
git-svn-id: svn://svn.berlios.de/openocd/trunk@1418 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-03-19 15:51:28 +00:00
oharboe 9f2a76e7b6 Hiroshi Ito <ito@mlb.co.jp> typos
git-svn-id: svn://svn.berlios.de/openocd/trunk@1417 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-03-18 11:59:31 +00:00
ntfreak 7f1b58a5cd - fix small typo in texi (section HostOS)
git-svn-id: svn://svn.berlios.de/openocd/trunk@1406 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-03-09 21:04:33 +00:00
duane e211e4c6d2 Patch from Dimitar Dimitrov adding support for Olimex ARM-JTAG-EW
git-svn-id: svn://svn.berlios.de/openocd/trunk@1402 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-03-08 15:14:18 +00:00
duane 7a731eb637 Added HostOS variable
git-svn-id: svn://svn.berlios.de/openocd/trunk@1400 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-03-07 15:19:21 +00:00
oharboe 4d3b6e4163 Holger Schurig <hs4233@mail.mn-solutions.de> incorporate some comments from Rick
git-svn-id: svn://svn.berlios.de/openocd/trunk@1376 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-02-18 09:09:11 +00:00
ntfreak b298cc07a0 - add --enable-release to docs
git-svn-id: svn://svn.berlios.de/openocd/trunk@1351 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-01-20 09:08:39 +00:00
kc8apf 93180753be Fix 'make maintainer-clean' courtesy of Zach Welch <zw@superlucidity.net>
git-svn-id: svn://svn.berlios.de/openocd/trunk@1345 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-01-20 03:55:38 +00:00
kc8apf 8f513f039a Fix support for ADuC702x flash. Courtesy of Michael Ashton <data@gtf.org>
git-svn-id: svn://svn.berlios.de/openocd/trunk@1343 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-01-20 03:49:31 +00:00
kc8apf 784a519170 Fix to install manpage as part of 'make install' by Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.berlios.de/openocd/trunk@1335 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-01-17 23:13:02 +00:00
ntfreak ebd5afbb0e Updates and fixes for the manpage from Uwe Hermann
- Mention that MIPS systems are supported
- Mention Jim Tcl engine
- Point to info page (not README) for a list of supported stuff
- Document missing --pipe option
- Fix copy-paste error ("flex" should have been "openocd")

git-svn-id: svn://svn.berlios.de/openocd/trunk@1307 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-01-08 17:23:55 +00:00
ntfreak fb06f353b1 - a few more docs tweaks
git-svn-id: svn://svn.berlios.de/openocd/trunk@1306 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-01-08 11:46:55 +00:00
ntfreak 8e88e8f36e - minor doc updates regarding tap creation and gdb connection using pipes
git-svn-id: svn://svn.berlios.de/openocd/trunk@1305 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-01-07 21:16:06 +00:00
ntfreak ab87627c5c - add gdb pipe support to native win32 (--pipe option)
git-svn-id: svn://svn.berlios.de/openocd/trunk@1294 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-01-01 16:06:46 +00:00
duane b18966d0ba Added note to user manual for packagers of OpenOCD
git-svn-id: svn://svn.berlios.de/openocd/trunk@1286 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-27 21:00:16 +00:00
duane 21eff7095c Added dongle VSLLINK - from Simon Qian
git-svn-id: svn://svn.berlios.de/openocd/trunk@1280 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-27 02:56:55 +00:00
duane e03f4f5a9b From Dirk Behme - Further docu fixes
git-svn-id: svn://svn.berlios.de/openocd/trunk@1278 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-27 02:18:06 +00:00
duane f7274784a2 Build Permutations with ftd2xx and libftdi addressed. Also added a new se of regression makefiles to build openocd in multiple ways
git-svn-id: svn://svn.berlios.de/openocd/trunk@1275 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-27 01:15:50 +00:00
oharboe 2b43391851 Dirk Behme <dirk.behme@googlemail.com>
Add missing tap-enable and tap-disable events to documentation.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1267 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-22 14:26:44 +00:00
kc8apf 063f4c182c - rlink interface support from Lou Deluxe <lou.openocd012@fixit.nospammail.net>
git-svn-id: svn://svn.berlios.de/openocd/trunk@1258 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-19 04:25:22 +00:00
oharboe a39f2a58f8 Dirk Behme <dirk.behme@googlemail.com> Fix some typos in documentation
git-svn-id: svn://svn.berlios.de/openocd/trunk@1249 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-16 19:29:50 +00:00
oharboe 71ab621c2c fixed compilation problem
git-svn-id: svn://svn.berlios.de/openocd/trunk@1244 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-15 12:57:29 +00:00
ntfreak 47d0449347 - add ability for openocd to communicate to gdb using pipes (stdin/stdout).
- this is enabled by new command line option option --pipe.

git-svn-id: svn://svn.berlios.de/openocd/trunk@1242 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-15 09:43:26 +00:00
ntfreak 83797fc516 - incorrect url in last commit for usbjtag
- added missing ft2232 option for interface axm0432_jtag

git-svn-id: svn://svn.berlios.de/openocd/trunk@1228 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-11 23:36:51 +00:00
ntfreak d6ed10a002 - added Axiom AXM-0432 to texi
- updated missing jtag dongle url's in texi
- reformat and remove whitespace from last commit

git-svn-id: svn://svn.berlios.de/openocd/trunk@1227 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-11 23:22:16 +00:00
ntfreak a53c304319 - typo with flash bank help command
- typo with flash erase_sector in texi

git-svn-id: svn://svn.berlios.de/openocd/trunk@1225 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-11 15:53:45 +00:00
ntfreak e3c567ccb0 - update texi to describe str9xpec driver flow
git-svn-id: svn://svn.berlios.de/openocd/trunk@1218 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-06 10:48:46 +00:00
duane d89fe56507 Added Joern Kaipf link for oocdlink
git-svn-id: svn://svn.berlios.de/openocd/trunk@1214 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-05 00:46:10 +00:00
duane ac9cb5027e Manual tweak based on feedback from mailing list the iar dongle works
git-svn-id: svn://svn.berlios.de/openocd/trunk@1206 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-04 01:23:47 +00:00
duane a28eaa85f7 jtag newtap change & huge manual update
git-svn-id: svn://svn.berlios.de/openocd/trunk@1194 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-30 22:25:43 +00:00
oharboe 3a636951eb Rick Altherr <kc8apf@kc8apf.net> retire obsolete syntax
git-svn-id: svn://svn.berlios.de/openocd/trunk@1190 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-27 14:58:49 +00:00
ntfreak 6d49edef7d - add new cortex_m3 maskisr cmd
git-svn-id: svn://svn.berlios.de/openocd/trunk@1181 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-21 14:27:47 +00:00
oharboe 71c7306885 fix telnet async messages. retired telnet_async command - no user serviceable parts inside.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-05 08:48:50 +00:00
oharboe 4ad68fb6d6 John McCarthy <jgmcc@magma.ca> - mips_4k options
git-svn-id: svn://svn.berlios.de/openocd/trunk@1133 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-05 06:39:33 +00:00
oharboe 3e3c313de3 Added Tcl escaping to FAQ
git-svn-id: svn://svn.berlios.de/openocd/trunk@1130 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-04 08:54:07 +00:00
oharboe c2120ba28a Added telnet_async command to enable/disable asynchronous
messages.

git-svn-id: svn://svn.berlios.de/openocd/trunk@1117 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-31 13:40:02 +00:00
oharboe bfd7a227b0 updated docs a bit.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1091 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-22 18:10:21 +00:00
oharboe ded76df68e Laurentiu Cocanu - more help text
git-svn-id: svn://svn.berlios.de/openocd/trunk@1088 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-22 10:13:52 +00:00
oharboe 39d5677fc9 Laurentiu Cocanu - document various commands.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1083 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-17 14:53:08 +00:00
ntfreak 871d2f2d01 - add link in texi docs
git-svn-id: svn://svn.berlios.de/openocd/trunk@1081 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-17 13:09:56 +00:00
ntfreak 9f989443f7 - remove texi warnings
git-svn-id: svn://svn.berlios.de/openocd/trunk@1079 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-17 12:26:27 +00:00
ntfreak 04fb21b28d - update docs deprecated section to include links to new commands (if any)
- added missing svn props

git-svn-id: svn://svn.berlios.de/openocd/trunk@1077 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-16 21:02:44 +00:00
oharboe e2f941b546 Laurentiu Cocanu - integrated new tcl target command docs
git-svn-id: svn://svn.berlios.de/openocd/trunk@1073 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-16 13:16:49 +00:00
oharboe a3035243dc unsik Kim <donari75@gmail.com> - mflash support
git-svn-id: svn://svn.berlios.de/openocd/trunk@1067 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-16 06:15:03 +00:00
ntfreak 2d07883d4a - make docs more readable
git-svn-id: svn://svn.berlios.de/openocd/trunk@1066 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-15 21:07:42 +00:00
ntfreak 4457800afe - fix tcl_port typo in docs
- remove build warning from openocd.c
- add missing svn props


git-svn-id: svn://svn.berlios.de/openocd/trunk@1065 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-15 15:11:36 +00:00
oharboe 50959e133c clarified jtag_ntrst_delay option
git-svn-id: svn://svn.berlios.de/openocd/trunk@1056 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-14 10:06:22 +00:00
oharboe 72665baf18 tip on checking with supplier for binaries
git-svn-id: svn://svn.berlios.de/openocd/trunk@1055 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-14 09:37:44 +00:00
oharboe 1cf14b384e added warning to use GDB 6.7 or newer
git-svn-id: svn://svn.berlios.de/openocd/trunk@1052 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-14 07:16:51 +00:00
ntfreak 279affdb98 - convert spaces to tabs in at91sam7.[ch]
- add missing svn props

git-svn-id: svn://svn.berlios.de/openocd/trunk@1009 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-27 13:00:01 +00:00
ntfreak 5c01a21b64 - update docs for aduc702x flash driver
git-svn-id: svn://svn.berlios.de/openocd/trunk@996 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-25 08:27:30 +00:00
ntfreak bdb5fd8c98 - renamed x7926 driver to aduc702x to match other flash drivers
- removed c99 types (mingw issues) from aduc driver and cleanup
- updated docs for aduc702x flash driver

git-svn-id: svn://svn.berlios.de/openocd/trunk@995 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-24 22:15:22 +00:00
oharboe f8c133dfc5 Removed some obsolete stuff + Pushing things in the direction of openocd.texi
git-svn-id: svn://svn.berlios.de/openocd/trunk@990 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-21 08:36:42 +00:00
oharboe 5ac8036b7f Removed target->reset_mode, no longer used
git-svn-id: svn://svn.berlios.de/openocd/trunk@976 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-01 07:24:14 +00:00
oharboe c6c1528ee5 documented change in target command w/removed options
git-svn-id: svn://svn.berlios.de/openocd/trunk@973 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-28 17:21:04 +00:00
ntfreak a3325f1dc4 - added missing parport configs to texi
- remove spaces from last patch

git-svn-id: svn://svn.berlios.de/openocd/trunk@951 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-20 10:51:45 +00:00
oharboe a42f85fe9a documentation wip for upcoming patch.
git-svn-id: svn://svn.berlios.de/openocd/trunk@918 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-14 13:41:14 +00:00
oharboe 20ff917e29 gdb_breakpoint_override comments
git-svn-id: svn://svn.berlios.de/openocd/trunk@915 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-13 21:08:14 +00:00
oharboe dc63c051a8 Michael Schwingen <rincewind@discworld.dascon.de> - add jedec_probe to doc
git-svn-id: svn://svn.berlios.de/openocd/trunk@901 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-08 14:34:35 +00:00
ntfreak ce16ff901c - fix target_examine declaration
- remove build warnings
- added --enable-gccwarnings to docs
- update mips_m4k_examine function

git-svn-id: svn://svn.berlios.de/openocd/trunk@893 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-06 14:36:37 +00:00
ntfreak 530057a846 - added run_and_halt_time to deprecated/removed functions section
git-svn-id: svn://svn.berlios.de/openocd/trunk@880 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-28 21:01:24 +00:00
oharboe e2b6de3d66 retired reset run_and_init/halt
git-svn-id: svn://svn.berlios.de/openocd/trunk@877 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-28 06:08:05 +00:00
oharboe 265e4e121a update jtag_speed/khz docs a bit.
git-svn-id: svn://svn.berlios.de/openocd/trunk@850 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-21 16:03:15 +00:00
ntfreak b78f488d63 - updated texi for removed daemon_startup command
- added info to deprecated/removed commands section

git-svn-id: svn://svn.berlios.de/openocd/trunk@837 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-19 09:31:54 +00:00
oharboe 2cac9c333f daemon_startup is now retired in favour of adding "init" and "reset halt/init/run" to the end of the config file/openocd command line.
git-svn-id: svn://svn.berlios.de/openocd/trunk@835 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-19 08:04:32 +00:00
oharboe 35e84a2a25 "reset" without arguments now execute a "reset run".
the reset mode argument to the target command is deprecated(ignored w/error message).

git-svn-id: svn://svn.berlios.de/openocd/trunk@832 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-18 14:43:29 +00:00
oharboe 44928321e6 Charles Hardin <ckhardin@gmail.com> and Øyvind Harboe
This patch just uses the command.c interface to create tcl commands for the root level commands and avoids a bit of the "TCL" bleed into the rest of the openocd code.

Multilevel commands also supported.


git-svn-id: svn://svn.berlios.de/openocd/trunk@818 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-17 08:34:14 +00:00
oharboe 8766d39617 feeble beginnings for tcl api rules.
git-svn-id: svn://svn.berlios.de/openocd/trunk@809 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-15 14:10:13 +00:00
oharboe a65255a06d testing/*.tcl sample & test code
git-svn-id: svn://svn.berlios.de/openocd/trunk@798 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-12 07:50:03 +00:00
oharboe d6194d7356 fix syntax error.
git-svn-id: svn://svn.berlios.de/openocd/trunk@764 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-07 06:36:12 +00:00
oharboe 7044908cf0 Charles Hardin <ckhardin@gmail.com> Tcl server documentation.
git-svn-id: svn://svn.berlios.de/openocd/trunk@763 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-07 06:29:07 +00:00
ntfreak f25b1c78fb - update docs for new target_script events
git-svn-id: svn://svn.berlios.de/openocd/trunk@735 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-06-27 17:51:55 +00:00
ntfreak 39dd91ed6b - updated docs for new stellaris mass_erase command
git-svn-id: svn://svn.berlios.de/openocd/trunk@683 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-24 15:01:56 +00:00
ntfreak 548bb19aa2 - added jlink support, based on Jürgen Stuber patch
git-svn-id: svn://svn.berlios.de/openocd/trunk@658 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-14 14:13:38 +00:00
oharboe 483ed5da4d The target library is now the authorotative source of config examples
git-svn-id: svn://svn.berlios.de/openocd/trunk@642 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-06 09:12:00 +00:00
ntfreak a6070450cb - updated docs for ft2232_vid_pid command
git-svn-id: svn://svn.berlios.de/openocd/trunk@639 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-02 10:36:12 +00:00
ntfreak 8bf24de7b3 - added info about libftdi support under win32
git-svn-id: svn://svn.berlios.de/openocd/trunk@638 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-02 09:35:48 +00:00
mifi 872919e53a - corrected typo in cfg file
git-svn-id: svn://svn.berlios.de/openocd/trunk@637 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-02 06:23:25 +00:00
oharboe ee8a6788df Tim Hudson worked on English language.
git-svn-id: svn://svn.berlios.de/openocd/trunk@636 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-01 21:29:05 +00:00
mlu 9a6b762ca7 Changed at91sam7_ecr working area to a valid SRAM adress for the AT91SAM7S/X target family
git-svn-id: svn://svn.berlios.de/openocd/trunk@633 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-30 20:49:53 +00:00
ntfreak 8acafd1710 - updated cortex_m3 docs regarding luminary reset behaviour
git-svn-id: svn://svn.berlios.de/openocd/trunk@625 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-29 06:56:03 +00:00
ntfreak 70bef9e2e0 - fix typo in openocd.texi
git-svn-id: svn://svn.berlios.de/openocd/trunk@608 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-23 09:53:04 +00:00
oharboe 3ccbf48fcc fixed doc for GDB memory map and flash program defaults to follow code
git-svn-id: svn://svn.berlios.de/openocd/trunk@605 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-23 05:46:26 +00:00
oharboe 6510be8b8b added fast option.
git-svn-id: svn://svn.berlios.de/openocd/trunk@604 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-23 05:42:42 +00:00
ntfreak 6cf3f38acf - update docs for flash write_image command
- remove info on flash auto_erase, added to removed commands section

git-svn-id: svn://svn.berlios.de/openocd/trunk@596 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-20 10:35:29 +00:00
oharboe 53c41935cd moved out stuff that wasn't already moved from openocd.pdf to the target library.
git-svn-id: svn://svn.berlios.de/openocd/trunk@576 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-14 06:26:53 +00:00
oharboe f2047d4775 Added a few tweaks while playing with texi.
git-svn-id: svn://svn.berlios.de/openocd/trunk@575 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-14 06:02:11 +00:00
ntfreak bb0830da6d - added note to docs about gdb 6.8 and memory map support
git-svn-id: svn://svn.berlios.de/openocd/trunk@541 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-05 10:07:12 +00:00
ntfreak ae176daac8 - updated docs with new commands/features
- added deprecated/removed commands chapter

git-svn-id: svn://svn.berlios.de/openocd/trunk@521 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-22 14:09:27 +00:00
oharboe 7e8892ca39 reset and post reset speed & jtag_khz command documented.
git-svn-id: svn://svn.berlios.de/openocd/trunk@515 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-13 20:09:33 +00:00
ntfreak 69749dbcb3 - update openocd.texi to fdl 1.2
git-svn-id: svn://svn.berlios.de/openocd/trunk@401 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-29 18:10:46 +00:00
oharboe d08da2ec04 Uwe Hermann: Add a --version switch for openocd.
git-svn-id: svn://svn.berlios.de/openocd/trunk@399 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-29 14:34:17 +00:00
oharboe 315cbed1fb Uwe Hermann: mproves the manpage text a bit and adds the
missing -s and -c options.

git-svn-id: svn://svn.berlios.de/openocd/trunk@394 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-29 12:30:21 +00:00
oharboe 6d0aa6dc05 Uwe Hermann: Simplify the manpage by removing lots of redundant information which is
already in the README or texinfo (and which needs to be updated
relatively often -- list of authors, list of supported JTAG devices etc).

git-svn-id: svn://svn.berlios.de/openocd/trunk@379 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-28 13:04:49 +00:00
oharboe e916cc840d numerous fixes from Uwe Hermann
git-svn-id: svn://svn.berlios.de/openocd/trunk@378 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-28 11:52:26 +00:00
ntfreak 9e5a6679ca - added svn props
- fixed mixed line endings on flash.c, log.c, gdb_server.c

git-svn-id: svn://svn.berlios.de/openocd/trunk@371 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-28 10:07:54 +00:00
ntfreak b70e262867 - fix line-endings
git-svn-id: svn://svn.berlios.de/openocd/trunk@363 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-28 07:44:13 +00:00
oharboe 8ff85b62ef Uwe Hermann Add @dircategory and @direntry to the info page -- they're used to add the openocd info page to the global index of info pages in the system (usually /usr/share/info/dir).
git-svn-id: svn://svn.berlios.de/openocd/trunk@361 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-28 07:26:14 +00:00
ntfreak 06b1bfed10 - correct line endings from previous commit
git-svn-id: svn://svn.berlios.de/openocd/trunk@359 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-27 18:59:38 +00:00
oharboe 5a15c6d807 Nicolas Pitre listed some more devices.
git-svn-id: svn://svn.berlios.de/openocd/trunk@356 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-27 06:44:45 +00:00
ntfreak 95df797b2e - add search paths via new arg -s (-search). Thanks Ted Roth
- updated docs for new command

git-svn-id: svn://svn.berlios.de/openocd/trunk@312 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-19 20:04:57 +00:00
ntfreak 53bbd36c7d - add autoprobe support to the stm32 flash driver
git-svn-id: svn://svn.berlios.de/openocd/trunk@287 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-10 15:08:44 +00:00
ntfreak 70b2de2a63 - added synchronous wait/resume patch. Thanks Øyvind Harboe
- updated docs for halt and wait_halt and resume commands

git-svn-id: svn://svn.berlios.de/openocd/trunk@285 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-09 11:44:17 +00:00
bodylove 7d9e292751 - Added example config and startup-script for a XScale IXP42x system
git-svn-id: svn://svn.berlios.de/openocd/trunk@272 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-21 20:51:01 +00:00
ntfreak 82e4477e47 - updated docs for cfi command, added missing ft2232_layout names
git-svn-id: svn://svn.berlios.de/openocd/trunk@261 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-21 11:05:35 +00:00
ntfreak 1796e1602e - add missing files from previous commit (tms470 flash driver)
git-svn-id: svn://svn.berlios.de/openocd/trunk@258 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-17 08:02:02 +00:00
ntfreak 6c9b804d61 - minimum autoconf 2.59 is now required and verified - due to issues with AS_HELP_STRING
- native win32 now handles WSAECONNRESET - no longer exits openocd
- qCRC packet now works correctly under cygwin (gdb compare-sections command)
- removed __USE_GNU define from gdbserver.c
- gdb qSupported packet is now handled, with this we are able to tell gdb packet size, memory map of target
- added new target script gdb_program_config - called before gdb flash programming
- new gdb server command gdb_memory_map (enable|disable> - default is disable
- new gdb server command gdb_flash_program (enable|disable> - default is disable
- gdb flash programming supported - vFlash packets
- image_elf_read_section now does not clear any remaining data, this was causing the gdb checksum to fail with certain files
- reformat of usbprog.c
- memory leak in command_print fixed
- updated texi doc to include new commands
- added gdb programming section to docs

git-svn-id: svn://svn.berlios.de/openocd/trunk@246 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-29 13:51:48 +00:00
mifi 2ec5bd2864 - corrected working_area of LPC2129 script
- added LPC2148 script
- corrected size of the working_area of the LPC2294 script

git-svn-id: svn://svn.berlios.de/openocd/trunk@245 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-21 16:21:05 +00:00
ntfreak 55f2fe830a - removed flash write_image - binary compare function has been moved to verify_image command
- minor code reformat and cleanup
- updated docs to include new commands

git-svn-id: svn://svn.berlios.de/openocd/trunk@243 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-20 16:19:10 +00:00
mifi 02f3765351 - added patch for new flash functionality like:
flash verify_image and flash erase_address.
- added patch for new parport_write_on_exit command.
Even this patch will fix some memory leaks.

(thanks too oyvind and Spen for these patches)

git-svn-id: svn://svn.berlios.de/openocd/trunk@240 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-18 21:20:28 +00:00
ntfreak d6fae6fe02 - added support for Hitex STM32 Performance Stick
- added str9 and stm32 scripts to docs

git-svn-id: svn://svn.berlios.de/openocd/trunk@213 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-11-23 15:16:22 +00:00
ntfreak 8c634335b4 - reset_run now works as expected on cortex-m3
- str9xpec erase status checked on option byte programming
- stm32x flash driver now supports sector protection
- surplus exit removed from flash.c
- openocd.texi documentation added

git-svn-id: svn://svn.berlios.de/openocd/trunk@212 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-11-21 16:37:17 +00:00
drath 20e4e77cdf - renamed M5960 USB JTAG to "flyswatter"
- make ep93xx and at91rm9200 bitbang JTAG interfaces dependant on ARM host (thanks to Vincent Palatin)
- various whitespace fixes
- removed various warnings
- add support for Debian GNU/kFreeBSD (thanks to Uwe Hermann)
- fix OpenOCD compilation for various platforms (thanks to Uwe Hermann and Vincent Palatin)
- switched order of JTAG chain examination and validation (examine first, then multiple validation tries even if examination failed)
- added target_request subsystem to handle requests from the target (debug messages and tracepoints implemented, future enhancements might include
semihosting, all ARM7/9 only for now)
- added support for GDB vFlashXXX packets (thanks to Pavel Chromy)
- added support for receiving data via ARM7/9 DCC
- reworked flash writing. the 'flash write' command is now deprecated and replaced by 'flash write_binary' (old syntax and behaviour) and 'flash
write_image' (write image files (bin, hex, elf, s19) to a target).
- added support for AMD/ST/SST 29F400B non-cfi flashes



git-svn-id: svn://svn.berlios.de/openocd/trunk@190 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-10 19:44:06 +00:00
drath 91d21d22ca - add missing configure.in change from last checkin
- add usbprog example config file
- update version string


git-svn-id: svn://svn.berlios.de/openocd/trunk@187 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-31 10:09:00 +00:00
drath df4b030df7 - documentation fixes (thanks to Uwe Hermann)
- bootstrapping changes to accomodate packaging (thanks to Uwe Hermann)


git-svn-id: svn://svn.berlios.de/openocd/trunk@182 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-26 09:34:49 +00:00
mlu 972ca49d3a Added patch for Luminar Micors Fury class devices (Joe Kroesche)
Added support for NVGM bit 2 for AT91SAM7XC128/256 

git-svn-id: svn://svn.berlios.de/openocd/trunk@172 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-06-14 17:33:20 +00:00
drath 53d1f9b2ca - added manpage for OpenOCD (thanks to Uwe Hermann)
- fixed bug in ARM926EJ-S cache handling that caused cache linefills to be disabled after first debug entry
- added support for auto image type detection (thanks to Vincent Palatin)
- further work on ETM trace decoding (tested with a ETB interface using an ETM in normal 16-bit port mode, still experimental)



git-svn-id: svn://svn.berlios.de/openocd/trunk@169 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-06-14 09:47:00 +00:00
drath 4cdb7c5a53 - added missing AT91RM9200 files
- bumped OpenOCD version date


git-svn-id: svn://svn.berlios.de/openocd/trunk@91 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-31 12:55:54 +00:00
drath 3acb107b9a - endianess fixes everywhere but in the flash code. flashing might still be broken on big-endian targets and/or hosts
- added access to ARM920T vector catch register (via generic register mechanism)
- don't disable linefills on ARM920T cores - this lead to lockups when accessing lines already contained in cache
- read content of ARM920T cache and tlb into file (arm920t read_flash/read_mmu commands)
- memory reading improved on ARM7/9, can be further accelerated with new "arm7_9 fast_memory_access enable" command (renamed from fast_writes)
- made in_handler independent from in field (makes the handler more flexible)
- added timeout to ft2232 when using D2XX library
- fixed STR7x protection bit handling on second bank (thanks to Bernard)
- added support for using the OpenOCD on AT91RM9200 systems (thanks to Anders Larsen)
- fixed AT91SAM7 flash handling when not running from 32kHz clock (thanks to Anders Larsen)


git-svn-id: svn://svn.berlios.de/openocd/trunk@90 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-31 12:41:49 +00:00
drath 9a830747b2 - fixed bug in .cfg files. Thanks to Michael Fischer for noticing this.
git-svn-id: svn://svn.berlios.de/openocd/trunk@86 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-14 15:45:11 +00:00
drath 91f58cccbc - updated configuration examples, installation instructions and README (including list of supported JTAG interfaces)
git-svn-id: svn://svn.berlios.de/openocd/trunk@85 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-14 10:58:12 +00:00
drath 8b4e882a16 - prepare OpenOCD for branching, created ./trunk/
git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02 10:36:31 +00:00