This lets the user set an itrigger trigger, which doesn't fit in the
normal breakpoint abstraction.
This implementation only allows control of a single itrigger. Hardware
could support more than one, and that may be useful to catch different
interrupts in different execution modes. But it would make the code/UI
more complex and it feels like an unlikely use case.
Change-Id: I76c88636ee73d4bd298b2bd1435cb5d052e86c91
Signed-off-by: Tim Newsome <tim@sifive.com>
Then also set it when we resume in examine(), which doesn't use the full
abstractions because not all required data structures are filled out
yet.
Hopefully fixes#749.
Change-Id: I0c6ab16da1f035ca2fbdb9f7be1462d44ddce3a0
Signed-off-by: Tim Newsome <tim@sifive.com>
Exit the loop when no harts are running, instead of when at least one
hart has halted.
Change-Id: Ia69b626bf1fee4034bd5ccc800a651bfe0e53685
Signed-off-by: Tim Newsome <tim@sifive.com>
It used to set all states to halted, but that's not right for harts that
are now unavailable. (It might be possible to call poll() at the right
time instead of duplicating some of its code, but I didn't see an easy
way to do that. The real requirement is that target->state is set to
TARGET_UNAVAILABLE before TARGET_EVENT_HALTED is is sent in
halt_finish(), because that's what triggers hwthread_update_threads(),
which must know about unavailable harts so they can be hidden from gdb.
Change-Id: I0a0bbdd4ec9ff8c9898e04045b84e1d2512c9336
Signed-off-by: Tim Newsome <tim@sifive.com>
There used to be entirely separate code paths depending on whether we're
in SMP mode or not. Now they're both the same.
Change-Id: I8f46295e4bc005f441af0c03d4f608c53b8a6586
Signed-off-by: Tim Newsome <tim@sifive.com>
This ensures that we populate the register cache and set target->state.
Some RISC-V changes had upset the balance.
Change-Id: I47fbf8ebd8fe39fa5b752212080f87e3b7e6e5e5
Signed-off-by: Tim Newsome <tim@sifive.com>
We don't correctly write it, so we shouldn't expect it to read back the
same value. Fixes hardware breakpoints on mcontrol triggers.
Change-Id: Ie5e445060ec9c8887af933fd8887e57308330f09
Indicate to the JTAG driver that it does not need
to read and return the DR register value after scanning the
JTAG chain.
riscv_batch_run(), calls jtag_add_dr_scan() to schedule a
DR scan operation. Eventually, this will result in the JTAG
driver performing a JTAG scan to write to or read from DR.
The decision on whether to write to and/or read from DR
register is determined by the second parameter to
jtag_add_dr_scan(), i.e. a "struct scan_field".
Of particular interest here is if
batch->fields[i]->in_value is not NULL, the JTAG developer
must return the DR value collected from the JTAG scan
operation.
When creating the DR scan operation instruction with
riscv_batch_add_dmi_write(), batch->fields[i]->in_value points
to a location in batch->data_in buffer,
meaning batch->field[i]->in_value is not NULL, and the JTAG
developer must therefore read and return the DR value collected.
The returning of the DR value is redundant in a write
operation.
This patch set batch->fields[i]->in_value to NULL to indicate
the DR value need not be returned. This allows the JTAG
developer to optimize away any code associated with returning
the DR value.
Normally, the extra work to return the DR value is negligible.
However, in one usecase it introduces significant delays
In this use case a JTAG driver forwards
all JTAG scan to a server on a network. If the server has to
return the DR value, it has to perform the JTAG scan before
replying to the JTAG driver, and only then the JTAG driver
can send the next JTAG scan operation. However, if there is
no need to return the DR value, the server can
acknowledge the JTAG operation request immediately,thus
signalling to the JTAG driver that it is free to send the next
JTAG scan operation. At the same time of receiving the second
JTAG operation the server will process the original JTAG scan.
This saves time and mitigates network delay. Also, not having
to include the DR value in resulting in smaller reply packet
from server to JTAG driver and save on network traffic.
This doubles download speeds to spike using remote bitbang.
Change-Id: Ibb37c3e32af0cc7006b22b8c4e1f31ed29c21d0f
Signed-off-by: Ooi, Cinly <cinly.ooi@intel.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Ooi, Cinly <cinly.ooi@intel.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Ooi, Cinly <cinly.ooi@intel.com>
It's only used to change what callback events are generated, and there
are none anyway. (That's probably a bug, but since 0.11 is so rare I'm
not going to worry about it.)
Fixes#757.
Change-Id: I5b5df3a9bec927fb0368304229533e2875a83f6b
Signed-off-by: Tim Newsome <tim@sifive.com>
On some boards there is a HW bug: if fp unit is disabled (fs in mstatus
set to 0), accessing any fp register results in a hang (any abstract
command timeouts, untill the board is rebooted).
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Change-Id: I0c0d1033889f15dcc326c4078bf9cbb5a8558565
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
E.g. the Zve* vector extensions have all the same registers as the full
V extension, but leaves misa.V clear.
Change-Id: Ib08c3612c52bb3a6b074d9431e3396c8f2f0ff27
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Prep work for handling unavailable harts.
Change-Id: I9c00ed4cdad8edeaa5a13fbec7f88f40d8af9028
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
* Use match field for trigger
The watchpoint cannot capture all data modifications only through the
trigger of ANY SIZE and EQUAL, and an error will occur. This patch
accommodates watchpoints by adding more types of matches
Change-Id: I5c3c908dbd49ca47755b06f5cdbe451be3a81c8b
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Xiang W <wxjstz@126.com>
* Update src/target/riscv/riscv.c
Change-Id: I3670347c4b00bf508373f7cc2f4950cbc09d6e2a
Signed-off-by: Xiang W <wxjstz@126.com>
* Add variable type trigger support
Change-Id: I60922c5f98574040b9a160e2aa0355871a581fe1
Signed-off-by: Xiang W <wxjstz@126.com>
* remove trailing whitespace
Change-Id: I168812e12b459ae3c4b3017c27a9b897e65d9f84
Signed-off-by: Xiang W <wxjstz@126.com>
* update triggers enumerate
Change-Id: I23a66afb0f772934b8911b522d0e4f116917519f
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
* target/riscv: Deal with DMI busy in sample_memory_bus_v1()
Change-Id: I810a4c4b7f02cb40ea99b7a500dce23c1bbd9231
Signed-off-by: Tim Newsome <tim@sifive.com>
* Comment code more clearly.
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
* Remove extra tab
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
* target/riscv Fix dm->current_hartid corruption on hartsellen discovery
Change-Id: Iec969df2675b608365eda2c3a83a4185752430f2
Signed-off-by: Charles Papon <charles.papon.90@gmail.com>
* target/riscv Ensure HART_INDEX_DIRTY does not have side effects
Change-Id: Ie89c94d97cd4f15c1be0327fddff75beea6ae027
Signed-off-by: Charles Papon <charles.papon.90@gmail.com>
Signed-off-by: Charles Papon <charles.papon.90@gmail.com>
* target/riscv: Correctly set target->state in deassert_reset
This bug didn't lead to problems, but it would with some upcoming
changes.
Change-Id: I552acbae9977150c4c9e573f8852033bc80fcebb
Signed-off-by: Tim Newsome <tim@sifive.com>
* Keep debug_reason in sync with state
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
* [riscv] step operation handler should respect handle_breakpoints parameter
When step operation is requested the OpenOCD frontend (like gdb server
or TCL server) has an option to control how existing breakpoints are
handled upon step.
Some OpenOCD frontends (like gdbserver) may choose to disable special
handling of existing breakpoints - thus handle_breakpoints is set to 0,
while others (like TCL server) expect target handler to temporary
disable the matching breakpoint to allow the step operation to complete
successfully.
In the current implementation handle_breakpoints parameter was ignored
by target-specific handler. Thus, the following sequence of commands:
```
halt
bp <current_pc> 4
step
```
Resulted in *step* operation to not change PC because of bp match.
This commit addresses this issue.
* Adjusted calls to logging facilities (addressed review comments)
Co-authored-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
Co-authored-by: Tim Newsome <tim@sifive.com>
* Properly track selecting multiple harts at once.
use_hasel is a bit of a hack.
Change-Id: Ia589ebc16bca32038d915df9988361b88e940917
Signed-off-by: Tim Newsome <tim@sifive.com>
* Clarifying comment.
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
* Rename set_hartsel to set_dmcontrol_hartsel
Change-Id: Iab28531281aa6fc604ec7d34974ed444ea9ea850
* Make set_dmcontrol_hartsel() more idiomatic.
Change-Id: I56a885043c515359e33b9c8a03aed637c81d1486
* Use constant for multiple harts instead of -1.
Change-Id: Iefeaf74202f2b4918d21f15f7ff7ca514175b8fb
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Also add an early exit for if any harts are unavailable.
Change-Id: I0875d4d213c9faf87b219d8d57e440881366c8f8
Signed-off-by: Tim Newsome <tim@sifive.com>
This was used to track which hart a given operation must apply to. But
we already have a target associated with each operation, and from there
we can find the desired hart id. dm013_info_t already tracks
current_hartid (meaning which hart ID is currently selected by the DM).
This makes the code simpler to understand. Also it turns out we don't
need to make sure the correct hart ID is currently selected because
there are only a few real entry points.
Change-Id: Ibe8d5e156523397f245edd6ec0a5df3239b717bf
Signed-off-by: Tim Newsome <tim@sifive.com>
According to RISC-V External Debug Support Version 0.13.2 (paragraph
3.12.6), cmderr field contains a valid value only if busy is 0, so it is
incorrect to analize it on timeout.
Scan-build reports:
Logic error: Uninitialized argument value
riscv.c:2688 2nd function call argument is an uninitialized value
This is a real error cause by running the command "riscv
authdata_write" without arguments. In such case 'value' is not
initialized and is passed to and used by r->authdata_write().
Reorganize the code to:
- detect the correct amount or command's arguments;
- drop the LOG_ERROR() on ERROR_COMMAND_SYNTAX_ERROR;
- drop the 'else' after 'return'.
Change-Id: I62e031220593b8308bc674b753e15d16d4c5c9ac
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7210
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
Scan-build reports:
Logic error: Result of operation is garbage or undefined
riscv.c:1614 The result of the left shift is undefined due
to shifting by '4294967281', which is greater or
equal to the width of type 'target_addr_t'
This is a false warning due to clang that considers the impossible
case of 32 bits hart (xlen = 32) in SATP_MODE_SV48 mode
(info->va_bits = 48).
Under such case:
riscv.c:1614 ... ((target_addr_t)1 << (xlen - (info->va_bits - 1))) ...
the shift amount wraps around the unsigned type and assumes the
value 4294967281 (0xfffffff1).
Use assert() to prevent clang from complaining.
Change-Id: I08fdd2a806c350d061641e28cf15a51b397db099
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7209
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Tested-by: jenkins
Scan-build reports:
Unused code: Dead nested assignment
riscv.c:459 Although the value stored to 'ir_user4_raw' is
used in the enclosing expression, the value is
never actually read from 'ir_user4_raw'
This is caused by the value reassigned in 'ir_user4_raw':
riscv.c:459 ir_user4[3] = (uint8_t)(ir_user4_raw >>= 8);
but never used.
Drop the DIY conversion in favor of h_u32_to_le() that does not
reassign the input value.
Change-Id: Ifad29f4c46d4a2d0a2f5a5c4104d768cc3db2794
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7208
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Tested-by: jenkins
Scan-build reports:
Unused code: Dead assignment
riscv.c:716 Value stored to 'result' is never read
Remove the initialization of variable 'result'.
Change-Id: Ied67bb4fcfa5bace186522074247ead43a5d5cd5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7207
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Tested-by: jenkins
Scan-build reports:
Unused code: Dead initialization
riscv-013.c:2362 Value stored to 'control' during its
initialization is never read
Remove the initialization of variable 'control'.
Change-Id: I548f8175530b9a2aa4c1788549d6467bf9824584
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7206
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Tested-by: jenkins
Scan-build complains about variable 'sbcs_orig' that can be used
not initialized.
Logic error: Assigned value is garbage or undefined
riscv-013.c:4468 Assigned value is garbage or undefined
This is caused by not checking the return value of the call
riscv-013.c:4466 dmi_read(target, &sbcs_orig, DM_SBCS);
In fact when dmi_read() returns error, the variable 'sbcs_orig' is
not assigned.
Check the returned value.
Change-Id: Ia9032a0229aa243138f95f4e13f765726a4ceae9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7205
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Tested-by: jenkins
With the old checkpatch we cannot use the correct format for the
SPDX tags in the file .c, in fact the C99 comments are not allowed
and we had to use the block comment.
With the new checkpatch, let's switch to the correct SPDX format.
Change created automatically through the command:
sed -i \
's,^/\* *\(SPDX-License-Identifier: .*[^ ]\) *\*/$,// \1,' \
$(find src/ contrib/ -name \*.c)
Change-Id: I6da16506baa7af718947562505dd49606d124171
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7153
Tested-by: jenkins
Symbols that are not used outside the file should not be exported
and should be declared as static.
Move the existing comments to the static declarations.
Change-Id: Idf208e3fda4b3f8df789553cf03ebf5f20d811bb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7170
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
Tested-by: jenkins
Symbols that are not exported should be declared as static.
Change-Id: Ie3bd17535c8cb2a0fec5d3bedfe7de3e0a702613
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7166
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Otherwise OpenOCD simply doesn't work without giving any indication why.
Change-Id: I21703fc1a0d9bed2f59da95f8a8395fe139484a4
Signed-off-by: Tim Newsome <tim@sifive.com>
* Don't read dmcontrol to set hartsel
We already know what dmcontrol should be. This addresses a long-standing
TODO. In a toy test, this reduced the number of scans by 10+%. (Most of
those are probably in poll(), so don't actually affect perceived
performance.)
Change-Id: I18e5ca391f0f5fb35f30d44dfef834e5a66aee20
Signed-off-by: Tim Newsome <tim@sifive.com>
* Make code easier to read
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Hopefully this will be the final version.
Change-Id: Ib2f8cd6f613c5e0f8e8bf7a16c3edbf2d9b439b2
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
See https://github.com/riscv/riscv-opcodes/pull/139
Change-Id: I77ae5ab369e6cde26ad44d177dcae38c0fbe08ef
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Now we get the license comment on the first line, which is required.
Change-Id: I54414db3c89ee6027e159ce9348459bc923b8595
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
This one doesn't have the license in there, which means now it's
acceptable to GPLv2 again.
See https://github.com/riscv/riscv-openocd/pull/711
Change-Id: I8ba27801172ffa955470d2627fa656cad282ee99
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7087
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
If range's upper bound was equal to 2^64 or the range was wrapping around 0
(which is perfectly legal), writes were not performed due to riscv_addr_t
overflow.
Make the main RISC-V structure more compliant with OpenOCD coding style.
Other typedefs remains as is.
Change-Id: I5657ad28fea8108fd66ab27b2dfe1c868dc5805b
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6998
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
SPDX tag is replacing the FSF boilerplate.
For files that have both, remove the FSF boilerplate and keep only
the SPDX tag.
Change-Id: I04c4764d13d4ca92453f30ed16aeae53cd4c3fc8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7057
Tested-by: jenkins
Add the SPDX tag to makefiles, configuration scripts and tcl files
present in the folders under src/
Change-Id: I1e4552aafe46ef4893d510da9d732c5f181784a4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7051
Tested-by: jenkins
This one doesn't have the license in there, which means now it's
acceptable to GPLv2 again.
Change-Id: I8ba27801172ffa955470d2627fa656cad282ee99
Signed-off-by: Tim Newsome <tim@sifive.com>
This gets us the new license header, which was requested upstream.
Change-Id: I992b4f3bb230edb9f281e2278dd41c712098ed4c
Signed-off-by: Tim Newsome <tim@sifive.com>
These enum values are useful for the arch level semihosting call handlers.
Currently riscv uses them, we also need similar return codes for the xtensa.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I8f63749cc203c59b07862f33edf3c393cd7e33a9
Reviewed-on: https://review.openocd.org/c/openocd/+/7039
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The segfault could be triggered if:
- At least one target failed to get examined (therefore does not have the
register cache set up yet),
- and "reset" TCL command was issued, which internally tries to
invalidate the register cache.
Minor cleanup: "registers_initialized" member removed from riscv_info_t
because it is not used anywhere.
Change-Id: I6288c0d4343ef6a330fb2a6b49d388e7eafa32a2
Signed-off-by: Jan Matyas <matyas@codasip.com>
* Update debug_defines from the spec.
Now it includes constants for field values, so use them instead of
duplicating that here.
Change-Id: I2fca6e89f25123c39d4bf483b8244e47aefb0f88
* Remove unused #defines
Change-Id: Id20351851c9ed2c3aa82ccf8c04b604bef11692a
* Use debug spec constants in a few more places
Change-Id: Ic4578729c89e3c6a26a72772e1635c5345bd6a52
Signed-off-by: Tim Newsome <tim@sifive.com>
* Use macros for trigger action types.
Which were added with the very latest debug_defines.h.
Change-Id: I47f73e11d2ec529c720f2e1df05f7b0d3026e43a
Signed-off-by: Tim Newsome <tim@sifive.com>
* Change set_haltgroup() to more general set_group()
Change-Id: Ib91a252ac63604e54b756f70c549ccd47241fd10
Signed-off-by: Tim Newsome <tim@sifive.com>
* Properly use enum.
Change-Id: I0edef6053fac388db38a22fe7557623fa93ec705
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
* Style changes suggested in review.
Change-Id: I29e83d3dbef09cb971ec0355aff733191a6e4679
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
* riscv: Add a option to specify the JTAG TAP IR used to access the bscan tunnel.
Change-Id: Ice8798823313e2177e75473e62b06e7da74bbba2
Signed-off-by: Charles Papon <charles.papon.90@gmail.com>
* risc-v: Add litex doc about the set_bscan_tunnel_ir command
Change-Id: I1237213f32886d20fc7d60d5ca1e2124953eaeda
Signed-off-by: Dolu1990 <charles.papon.90@gmail.com>
* risc-v: remove tunnel ir length assert when ir is set by the user
Change-Id: I2b33fc6205f37461ff1bd15601b460a2467ea32b
Signed-off-by: Dolu1990 <charles.papon.90@gmail.com>
* Open riscv: Add a option to specify the JTAG TAP tunnel IR
Typo
Co-authored-by: Tim Newsome <tim@sifive.com>
* riscv: Add a option to specify the JTAG TAP tunnel IR
typo
Co-authored-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Tim Newsome <tim@sifive.com>
* Fix checkpatch workflow: ignore changes in .github/
Ignore changes in .github/ directory when running checkpatch.
Checkpatch emits false alarms on substrings "CC:" found in *.yml
workflow files, apparently thinking it is a "Cc:" signature in
commit message.
Change-Id: Id977d5a8838797e4676758066af4825651c41a87
* Fix: Set proper debug_reason in deassert_reset()
The issue was visible for example when user's .cfg file ended
with "reset halt" command:
In such case, the hart would remain halted but the debug_reason would not be
updated and may retain an incorrect value, e.g. DBG_REASON_NOTHALTED.
In such cases, gdb_last_signal() would provide an incorrect reply to GDB.
Change-Id: Ie6f050295fb5cbe9db38b189c4bc385662acf5b4
Signed-off-by: Jan Matyas <matyas@codasip.com>
* Fix checkpatch workflow: add 'apt-get update'
Change-Id: Ic5843ec86d16a187d01970a3253caade3d13b7ab
Signed-off-by: Jan Matyas <matyas@codasip.com>
The 'set' variable name suggests a boolean data type which determines
whether a breakpoint (or watchpoint) is active. However, it is also
used to store the number of the breakpoint.
This encoding leads to inconsistent value assignments: boolean and
integer values are mixed. Also, associated hardware comparator
numbers, which are usually numbered from 0, cannot be used directly.
An additional offset is required to store the comparator numbers.
In order to make the code more readable and the value assignment more
consistent, change the variable name to 'is_set', its data type to 'bool'
and introduce a dedicated variable for the break-/watchpoint
number.
In order to make the review easier, the data types of various related
variables (e.g. number of breakpoints) are not changed.
While at it, fix a few coding style issues.
Change-Id: I2193f5639247cce6b80580d4c1c6afee916aeb82
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/6319
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* flash/nor/atsame5: add LAN9255 devices
Support Microchip LAN9255 devices with embedded SAME53J MCU.
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Change-Id: Ia811c593bf7cf73e588d32873c68eb67c6fafad7
Reviewed-on: https://review.openocd.org/c/openocd/+/6811
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* tcl/board: Add EVB-LAN9255 config
Config for EVB-LAN9255, tested using Atmel-ICE debugger on J10
connector.
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Change-Id: I8bcf779e9363499a98aa0b7d10819c53da6a19e7
Reviewed-on: https://review.openocd.org/c/openocd/+/6812
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* aarch64: support for aarch32 ARM_MODE_UND
Fix:
unrecognized psr mode: 0x1b
cannot read system control register in this mode: (UNRECOGNIZED : 0x1b)
Change-Id: I4dc3e72f90d57e52c0fe63cb59a7529a398757b3
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Change-Id: Ifa5d21ae97492fde9e8c79ee7d99d8a2a871b1b5
Reviewed-on: https://review.openocd.org/c/openocd/+/6808
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* Combine register lists of smp targets.
This is helpful when you want to pretend to gdb that your heterogeneous
multicore system is homogeneous, because gdb cannot handle heterogeneous
systems. This won't always works, but works fine if e.g. one of the
cores has an FPU while the other does not. (Specifically, HiFive
Unleashed has 1 core with no FPU, plus 4 cores with an FPU.)
Signed-off-by: Tim Newsome <tim@sifive.com>
Change-Id: I05ff4c28646778fbc00327bc510be064bfe6c9f0
Reviewed-on: https://review.openocd.org/c/openocd/+/6362
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* semihosting: use open mode flags from GDB, not from sys/stat.h
Values defined in sys/stat.h are not guaranteed to match
the constants defined by the GDB remote protocol, which are defined in
https://sourceware.org/gdb/onlinedocs/gdb/Open-Flags.html#Open-Flags.
On my local system (Manjaro 21.2.1 x86_64), for example, O_TRUNC is
defined as 0x40, whereas GDB requires it to be 0x400,
causing all "w" file open modes to misbehave.
This patch has been tested with STM32F446.
Change-Id: Ifb2c740fd689e71d6f1a4bde1edaecd76fdca910
Signed-off-by: Pavel Kirienko <pavel.kirienko@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6804
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* semihosting: User defined operation, Tcl command exec on host
Enabling a portion (0x100 - 0x107) of the user defined semihosting
operation number range (0x100 - 0x1FF) to be processed with the help of
the existing target event mechanism, to implement a general-purpose Tcl
interface for the target available on the host, via semihosting
interface.
Example usage:
- The user configures a Tcl command as a callback for one of the newly
defined events (semihosting-user-cmd-0x10X) in the configuration
file.
- The target can make a semihosting call with <opnum>, passing optional
parameters for the call.
If there is no callback registered to the user defined operation number,
nothing happens.
Example usage: Configure RTT automatically with the exact, linked
control block location from target.
Signed-off-by: Zoltán Dudás <zedudi@gmail.com>
Change-Id: I10e1784b1fecd4e630d78df81cb44bf1aa2fc247
Reviewed-on: https://review.openocd.org/c/openocd/+/6748
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* target/smp: use a struct list_head to hold the smp targets
Instead of reinventing a simply linked list, reuse the list helper
for the list of targets in a smp cluster.
Using the existing helper, that implements a double linked list,
makes trivial going through the list in reverse order.
Change-Id: Ib36ad2955f15cd2a601b0b9e36ca6d948b12d00f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6783
Tested-by: jenkins
* helper/list: add list_for_each_entry_direction()
Use a bool flag to specify if the list should be forward or
backward iterated.
Change-Id: Ied19d049f46cdcb7f50137d459cc7c02014526bc
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6784
Tested-by: jenkins
* target/riscv: revive 'riscv resume_order'
This functionality was lost in [1], which was merged as commit
615709d140 ("Upstream a whole host of RISC-V changes.").
Now it works as expected again.
Add convenience macro foreach_smp_target_direction().
Link: [1] https://github.com/riscv/riscv-openocd/pull/567
Change-Id: I1545fa6b45b8a07e27c8ff9dcdcfa2fc4f950cd1
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6785
Tested-by: jenkins
* doxygen: fix some function prototype description
Change-Id: I49311a643ea73143839d2f6bde976cfd76f8c67f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6830
Tested-by: jenkins
* Cadence virtual debug interface (vdebug) integration
Change-Id: I1bc105b3addc3f34161c2356c482ff3011e3f2cc
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6097
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* gdb_server: Include thread name as XML attribute
Explicitly providing a thread name in the "thread" element produces
better thread visualizations in downstream tools like IDEs.
Signed-off-by: Ben McMorran <bemcmorr@microsoft.com>
Change-Id: I102c14ddb8b87757fa474de8e3a3f6a1cfe10d98
Reviewed-on: https://review.openocd.org/c/openocd/+/6828
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* Fix small memory leak.
See https://github.com/riscv/riscv-openocd/pull/672
Change-Id: Ia11ab9bcf860f770ea64ad867102c74b898f6b66
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6831
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* server: remove remaining crust from dropped eCos code
Commit 39650e2273 ("ecosboard: delete bit-rotted eCos code") has
removed eCos code but has left some empty function that was used
during non-eCos build to replace eCos mutex.
Drop the functions and the file that contain them.
Change-Id: I31bc0237ea699c11bd70921660f960ee406ffa80
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6835
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* rtos: threadx: Add hla_target support for ThreadX
Tested with an AZ3166 dev board (which uses the STM32F412ZGT6) running
the Azure RTOS ThreadX demonstration system.
Signed-off-by: Ben McMorran <bemcmorr@microsoft.com>
Change-Id: I44c8f7701d9f1aaa872274166321cd7d34fb1855
Reviewed-on: https://review.openocd.org/c/openocd/+/6829
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* .gitmodules: switch away from repo.or.cz
The host repo.or.cz is often offline, creating issues for cloning
and building OpenOCD from scratch.
Already 'jimtcl' developer has dropped repo.or.cz, triggering the
OpenOCD commit 861e75f54e ("jimtcl: switch to github").
Change also the link of the remaining submodules 'git2cl' and
'libjaylink' to their respective main repository.
Change-Id: Ib513237427635359ce36a480a8f2060e2fb12ba4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6834
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
* flash/nor/stm32f2x: Fix erase of bank 2 sectors
This commit corrects the erase function for stm32f2x when dealing with
sectors in bank 2, for STM32F42x/43x devices with 1MB flash.
On STM32F42x/43x with 1MB flash in dual bank configuration, the sector
numbering is not consecutive. The last sector in bank 1 is number 7, and
the first sector in bank 2 is number 12.
The sector indices used by openocd, however, _are_ consecutive (0 to 15
in this case). The arguments "first" and "last" to stm32x_erase() are of
this type, and so the logic surrounding sector numbers needed to be
corrected.
Since the two banks in dual bank mode have the same number of sectors, a
sector index in bank 2 is larger than or equal to half the total number
of sectors.
Change-Id: I15260f8a86d9002769a1ae1c40ebdf62142dae18
Signed-off-by: Simon Johansson <ampleyfly@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6810
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
* target/cortex_m: fix target_to_cm() helper
The third parameter of container_of() should point to the same member
as target->arch_info points to, struct arm.
It worked just because struct arm is the first member in
struct armv7m_common.
If you move arm member from the first place, OpenOCD fails heavily.
Change-Id: I0c0a5221490945563e17a0a34d99a603f1d6c2ff
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6749
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* target/armv7m,cortex_m: introduce checked arch_info cast routines
target_to_armv7m() and target_to_cm() do not match the magic number
so they are not suitable for use outside of target driver code.
Add checked versions of pointer getters. Match the magic number
to ensure the returned value points to struct of the correct type.
Change-Id: If90ef7e969ef04f0f2103e0da29dcbe8e1ac1c0d
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6750
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* target/cortex_m: add Cortex-M part number getter
The getter checks the magic numbers in arch_info to detect eventual
type mismatch.
Change-Id: I61134b05310a97ae9831517d0516c7b4240d35a5
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6751
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
* flash/nor/stm32xx: fix segfault accessing Cortex-M part number
Some of STM32 flash drivers read Cortex-M part number from
cortex_m->core_info.
In corner cases the core_info pointer was observed uninitialised
even if target_was_examined() returned true. See also [1]
Use the new and safe helper to get Cortex-M part number.
While on it switch also target_to_cm()/target_to_armv7m() to the safe
versions. This prevents a crash when the flash bank is misconfigured
with non-Cortex-M target.
Add missing checks for target_was_examined() to flash probes.
[1] 6545: fix crash in case cortex_m->core_info is not set
https://review.openocd.org/c/openocd/+/6545
Change-Id: If2471af74ebfe22f14442f48ae109b2e1bb5fa3b
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Fixes: f5898bd93f (flash/stm32fxx.c: do not read CPUID as this info is stored in cortex_m_common)
Reviewed-on: https://review.openocd.org/c/openocd/+/6752
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
* cpld: altera-epm240: Add additional IDCODEs
This adds some additional IDCODEs from the datasheet. It also adds
support for customizing the tap name.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Change-Id: I7cda10b92c229b61836c12cd9ca410de358ede2e
Reviewed-on: https://review.openocd.org/c/openocd/+/6846
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* cpld: altera-epm240: Increase adapter speed
According to the datasheet, the minimum clock period with Vccio1 = 1.5V
(the lowest voltage supported) is 143ns, or around 6MHz. Set the default
adapter speed to 5 MHz.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Change-Id: I21cad33fa7f1e25e81f43b5d2214d1fa4ec924de
Reviewed-on: https://review.openocd.org/c/openocd/+/6847
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* target: Add support for ls1088a
The LS1088A is an octo-core aarch64 processor from NXP in the layerscape
family. The JTAG is undocumented, but I was able to figure things out
from the output of `dap info`. This is the first in-tree example of
using the hwthread rtos (as far as I know), so hopefully it can serve as
an example to other developers. There are some ETMs, but I was unable to
try them out because I got 'invalid command name "etm"' when trying to
test things out.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Change-Id: I9b0791d27d8c41170a413a8d86431107a85feba2
Reviewed-on: https://review.openocd.org/c/openocd/+/6848
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* target: ls1088a: Add service processor
Normally the service processor is not necessary for debugging. However,
if you are using the hard-coded RCW or your boot source is otherwise
corrupt, then the general purpose processors will never be released from
hold-off. This will cause GDB to become confused if it tries to attach,
since they will appear to be running arm32 processors. To deal with
this, we can release the CPUs manually with the BRRL register. This
register cannot be written to from the axi target, so we need to do it
from the service processor target. This involves halting the service
processor, modifying the register, and then resuming it again. We try
and determine what state the service processor was in to avoid resuming
it if it was already halted.
The reset vector for the general purpose processors is determined by the
boot logation pointer registers in the device configuration unit.
Normally these are set using pre-boot initialization commands, but if
they are not set then they default to 0. This will cause the CPU to
almost immediately hit an illegal instruction. This is fine because we
will almost certainly want to attach to the processor and load a program
anyway.
I considered adding this as an event handler for either gdb-attach or
reset-init. However, this command shouldn't be necessary most of the
time, and so I don't think we should run it automatically.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Change-Id: I1b725292d8a11274d03af5313dc83678e10e944c
Reviewed-on: https://review.openocd.org/c/openocd/+/6850
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* board: Add NXP LS1088ARDB
This adds a board file for the NXP LS1088ARDB. This only covers the
"primary" JTAG header J55, and not the PCIe header (J91). The only
oddity is that the LS1088A and CPLD are muxed by adding/removing a
jumper from J48. Unfortunately, it doesn't look like OpenOCD supports
this CPLD beyond determining the irlen, so it's not very useful. Those
who are interested in experimenting can define CWTAP to access the CPLD,
but the default is to access the CPU.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Change-Id: Ia07436a534f86bd907aa5fe2a78a326a27855a24
Reviewed-on: https://review.openocd.org/c/openocd/+/6849
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* gdb_server: fix double free
Commit 6541233aa7 ("Combine register lists of smp targets.")
unconditionally assigns the output pointers of the function
smp_reg_list_noread(), even if the function fails and returns
error.
This causes a double free from the caller, that has assigned NULL
to the pointers to simplify the error handling.
Use local variables in smp_reg_list_noread() and assign the output
pointers only on success.
Change-Id: Ic0fd2f26520566cf322f0190780e15637c01cfae
Fixes: 6541233aa7 ("Combine register lists of smp targets.")
Reported-by: Michele Bisogno <michele.bisogno.ct@renesas.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6852
Tested-by: jenkins
Reviewed-by: Michele Bisogno <michele.bisogno.ct@renesas.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
* gdb_server: check target examined while combining reg list
Commit 6541233aa7 ("Combine register lists of smp targets.")
assumes that all the targets in the SMP cluster are already
examined and unconditionally call target_get_gdb_reg_list_noread()
that will in turn return error if the target is not examined yet.
Skip targets not examined yet.
Add an additional check in case the register list cannot be built,
e.g. because no target in the SMP cluster is examined. This should
never happen, but it's better to play safe.
Change-Id: I8609815c3d5144790fb05a870cb0c931540aef8a
Fixes: 6541233aa7 ("Combine register lists of smp targets.")
Reported-by: Michele Bisogno <michele.bisogno.ct@renesas.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6853
Tested-by: jenkins
Reviewed-by: Michele Bisogno <michele.bisogno.ct@renesas.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
* flash/stm32l4x: fix maybe-uninitialized compiler error
using gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0 we get:
error: ‘retval’ may be used uninitialized in this function
fixes: 13cd75b6ec (flash/nor/stm32xx: fix segfault accessing Cortex-M part number)
Change-Id: I897c40c5d2233f50a5385d251ebfa536023e5cf7
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6861
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* Fix build.
Change-Id: Ia60246246dd859d75659a43d1c59588dbb274d46
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Co-authored-by: Julien Massot <julien.massot@iot.bzh>
Co-authored-by: Pavel Kirienko <pavel.kirienko@gmail.com>
Co-authored-by: Zoltán Dudás <zedudi@gmail.com>
Co-authored-by: Antonio Borneo <borneo.antonio@gmail.com>
Co-authored-by: Jacek Wuwer <jacekmw8@gmail.com>
Co-authored-by: Ben McMorran <bemcmorr@microsoft.com>
Co-authored-by: Simon Johansson <ampleyfly@gmail.com>
Co-authored-by: Tomas Vanek <vanekt@fbl.cz>
Co-authored-by: Sean Anderson <sean.anderson@seco.com>
Co-authored-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
This functionality was lost in [1], which was merged as commit
615709d140 ("Upstream a whole host of RISC-V changes.").
Now it works as expected again.
Add convenience macro foreach_smp_target_direction().
Link: [1] https://github.com/riscv/riscv-openocd/pull/567
Change-Id: I1545fa6b45b8a07e27c8ff9dcdcfa2fc4f950cd1
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6785
Tested-by: jenkins
Instead of reinventing a simply linked list, reuse the list helper
for the list of targets in a smp cluster.
Using the existing helper, that implements a double linked list,
makes trivial going through the list in reverse order.
Change-Id: Ib36ad2955f15cd2a601b0b9e36ca6d948b12d00f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6783
Tested-by: jenkins
Continuation of the previous patch. There are two more cases
when progbuf cache in OpenOCD shall be invalidated:
- When OpenOCD resets the debug module undergoes reset (dmactive=0),
e.g. during target examination
- When the user manually performs that very same operation
(via riscv dmi_write)
Change-Id: I53f8f08250eeedcbd55ab4361d5665370b063680
Signed-off-by: Jan Matyas <matyas@codasip.com>
This commit relates to progbuf cache,
implemented in https://github.com/riscv/riscv-openocd/pull/381
Make sure the cache gets invalidated when the progbuf
contents change via other means. I've identified two
such cases where the invalidation is required:
1) When the user manually tinkers with the progbuf registers
(TCL command "riscv dmi_write")
2) When program buffer is used as a scratch memory
(scratch_write64())
Change-Id: Ie7ffb0fccda63297de894ab919d09082ea21cfae
Signed-off-by: Jan Matyas <matyas@codasip.com>
Enabling a portion (0x100 - 0x107) of the user defined semihosting
operation number range (0x100 - 0x1FF) to be processed with the help of
the existing target event mechanism, to implement a general-purpose Tcl
interface for the target available on the host, via semihosting
interface.
Example usage:
- The user configures a Tcl command as a callback for one of the newly
defined events (semihosting-user-cmd-0x10X) in the configuration
file.
- The target can make a semihosting call with <opnum>, passing optional
parameters for the call.
If there is no callback registered to the user defined operation number,
nothing happens.
Example usage: Configure RTT automatically with the exact, linked
control block location from target.
Signed-off-by: Zoltán Dudás <zedudi@gmail.com>
Change-Id: I10e1784b1fecd4e630d78df81cb44bf1aa2fc247
Reviewed-on: https://review.openocd.org/c/openocd/+/6748
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This replaces a static array with 8 bytes per register. When there are
vector registers larger than 8 bytes, they would end up clobbering each
other's values. I can't believe I didn't catch this earlier.
See https://github.com/riscv/riscv-openocd/pull/658
Change-Id: I9df4eaf05617a2c8df3140fff9fe53f61ab2b261
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6775
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Standard C library free() allows NULL pointer as a parameter.
Change target_free_working_area() to conform this convention.
Remove NULL pointer tests before target_free_working_area() calls.
While on it add missing setting pointer to NULL after target_free_working_area().
Change-Id: I7c692ab04a9933398ba5bc614723ad0bdecb87b3
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6712
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* Deal with halt race.
What could happen:
1. hart 1 halts due to a breakpoint
2. OpenOCD polls and notices hart 1 has halted.
3. hart 0 halts because it is in a halt group with halt 1
4. OpenOCD decides to halt hart 0 also.
5. OpenOCD discovers hart 0 is already halted, and doesn't update the
debug reason.
In that case OpenOCD would tell gdb that hart 0 halted, while the
interesting event is that hart 1 halted.
Fix this by updating the debug reason when we discover a hart is already
halted when we try to halt it.
This race was exposed in the Sv* address translation tests, but the bug
has nothing to do with address translation.
Change-Id: I59d871e8545bd644bf42581266f15234b93e9900
Signed-off-by: Tim Newsome <tim@sifive.com>
* Comment set_debug_reason
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
I missed this when I first add mcontrol6 support.
https://github.com/riscv/riscv-openocd/pull/648
Change-Id: I1a2706c7ea3a6757ed5083091cd2c764a8b0267c
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6684
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The main intention is to get access to some of the CSRs
that were so far unknown to OpenOCD (tinfo, mcountinhibit, ...).
https://github.com/riscv/riscv-openocd/pull/659
Signed-off-by: Tim Newsome <tim@sifive.com>
Change-Id: I824fdb558d5c1f73432b0f56f3b0b4d865eceeba
Reviewed-on: https://review.openocd.org/c/openocd/+/6682
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tim Newsome
Dolu1990
Evgeniy Naydanov
Xiang W
Anatoly Parshintsev
Dmitry Ryzhov
Evgeniy Naydanov
Antonio Borneo
Tomas Vanek
Erhan Kurubas
Jan Matyas
wzgpeter
Marc Schink
Erhan Kurubas
Jan Matyas
Zoltán Dudás