Bugfix the read side of flash protection:
- read the right register(s)!
- handle more than 64K
- record the results in the right places
- don't display garbage.
Partially bugfix the write side:
- use 2KB lock regions instead of 1KB pages (!)
- validate input range
- don't try to _remove_ protection (it's write-once)
- #define values we'll need to commit writes.
- ... still doesn't handle pages over 64KB mark, or commit writes
And minor cleanup and fixes:
- get rid of some forward decls
- properly locate a doxygen comment
- fix some bad indentation
- remove superfluous #include
- add a new part ID (many are still missing)
- make the downloaded algorithm code be read-only
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
These were all basically "can't happen" cases ... like having
state be corrupted by an alpha particle after the previous check
for whether a value was in-range.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Most of these happened to be in the target.h file.
Some of those are associated with symbols that could be
removed at some point ... e.g. NVP_ASSERT/true and its
sibling NVP_DEASSERT/false.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The exception being declarations for drivers. Those should
be split out in some clean way -- like driver add/remove calls
made by initialization code -- but that's for another day.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
It's as if despite integers being 32-bits, GCC refuses to
convert a "uint32_t" to one of them.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Low latency low CPU processing power systems(embedded)
will benefit greatly from being able to inline certain
jtag_add_xxx() fn's. The trick is that this has to be
done in such a way as to allow implementing an OpenOCD
API with a shared library(eventually) on a PC hosted
OpenOCD.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Some versions of GCC don't understand that if you mask with 0x3
then have cases 0-3, it's not possible for a variable assigned in
all those branches to have no value at end-of-case. Feh.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
When starting up, say how many hardware breakpoints and watchpoints
are available on various targets.
This makes it easier to tell GDB how many of those resources exist.
Its remote protocol currently has no way to ask OpenOCD for that
information, so it must configured by hand (or not at all).
Update the docs to mention this; remove obsolete "don't do this" info.
Presentation of GDB setup information is still a mess, but at least
it calls out the three components that need setup.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Provide and use debug_reason_name() instead of expecting targets
to call Jim_Nvp_value2name_simple(). Less dependency on Jim, and
the code becomes more clear too.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Have various ARM cores delegate to arm_arch_state() to display
basic information, instead of duplicating that logic.
This shrinks the code, makes them all report when semihosting
is active, and highlights which data are specific to this core.
(Like ARM720 not having separate instruction and data caches.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Move most declarations in <target/armv4_5.h> to <target/arm.h>
and update users.
What's left in the older file is stuff that I think should be
removed ... the old register cache access stuff, which makes it
awkward to support microcontroller profile (Cortex-M) cores.
The armv4_5_run_algorithm() declaration was moved too, even
though it's not yet as generic as it probably ought to be.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Rename some (mostly) generic ARM functions:
armv4_5_arch_state() --> arm_arch_state()
armv4_5_get_gdb_reg_list() --> arm_get_gdb_reg_list()
armv4_5_init_arch_info() --> arm_init_arch_info()
Cores using the microcontroller profile may want a different
arch_state() routine though.
(Also fix strange indentation in arm_arch_state: use tabs only!
And update a call to it, removing assignment-in-conditional.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Move the ARM opcode macros from <target/armv4_5.h>, and a few
Thumb2 ones from <target/armv7m.h>, to more appropriate homes
in a new <target/arm_opcodes.h> file.
Removed duplicate opcodes from that v7m/Thumb2 set. Protected
a few macro argument references by adding missing parentheses.
Tightening up some of the line lengths turned up a curious artifact:
the macros for the Thumb opcodes are all 32 bits wide, not 16 bits.
There's currently no explanation for why it's done that way...
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Get rid of mrc_opcode() in favor of ARMV4_5_MRC() or, where
arm*20t should have used it, ARMV4_5_MCR() instead.
Basically, *writing* coprocessor registers shouldn't have
used the *read* opcode ... and both should stick to standard
opcode constructors, not rearranging parameter sequence any
more than already needed.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The SRS and RFE instructions speed exception entry/exit by
making it easy to save and restore PC and SPSR. This handles
both ARM and Thumb2 encodings.
Fix minor PLD goofage; that "should never reach this point"
can't happen, so remove it.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The low two bits are defined as should-be-zero-or-presereved.
We'll take the zero option, it's easier to enforce.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Rename the existing 'flash banks' implementation as 'flash list', and
replace the broken 'flash_banks' TCL wrapper with a new command handler.
Adds documentation for the new 'flash list' command in the user guide.
The 'flash banks' command produces a list that needs to be formatted
properly for GDB's 'mem info' to work properly. The flash_banks TCL
wrapper provided this formatting, but wrappers no longer work for
second-level commands as they did in the past. With this patch,
the 'flash_banks' command can be used with the new command syntax
and display the required information.
More updates from the code review by Steve Grubb <sgrubb@redhat.com>.
The Jim float-comparision bug just gets a comment not a fix, though.
Cc: Steve Grubb <sgrubb@redhat.com>.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Fall back to software breakpoint when vector catch isn't available.
Possible enhancements:
- add extra optional command parameter to select high vectors
- add extra optional command parameter to select hardware breakpoint
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Rename nand.h as flash/nand/core.h, chase consumers. The public APIs
need to be sorted out with imp.h, but this allows other changes to
begin improving the separation between policy and mechanism.
Moves #include <target/target.h> and #include "driver.h" into the
internal headers or source files, removing it from <flash/nand/core.h>.
Moves commands into nand/tcl.c and core implementation to 'nand/core.c'
and 'nand/fileio.c'. Eliminates 'flash/nand.c'.
Adds 'nand/imp.h' to share routines between TCL commands and core.
This work parallels the NOR directory, encapsulating the NAND drivers
into a separate file. This takes an extra step by encapsulating the
type of data structure used to manage the drivers, allowing it to be
changed from an array to a dynamic list in the future.
Remove an undesirable use of the CPSR symbol ... it needs to vanish.
Flag mode-to-number stuff as obsolete; say why ... should also vanish.
Get rid of no-longer-used mode and state typedefs.
Comment a few of the implicit ties to "classic ARM".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
As with Cortex-A8, the WFAR register holds useful information
that should be recorded and, where relevant, displayed.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Tweak scanchain 7 debug messaging:
- show register addresses in decimal, matching ARM docs;
- remove some pointless noise
Avoid some needless roundtrips:
- skip SCAN_N when SCREG already holds that number (speeds up
polling and other common operations)
- avoid zeroing vcr twice on resume
Show the IR opcode as a label ("RESTART") too; and in decimal,
matching ARM docs.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Move the bulk of the flash.h file into flash/nor/core.h, leaving an
empty husk that will be removed in the next patch.
The NOR driver structure is an implementation detail, so move it into
its own private header file <flash/nor/driver.h> along with helper
declaration for finding them by name.
Splits the exec mode commands out of flash.c into the flash/nor/ files.
The routines used by these high-level commands are moved into nor/core.c,
with their internal declarations placed in nor/imp.h.
Fixes distribution of <flash/nor/core.h> header.
Clean up arm_semihosting() entry a bit, comment some issues and just
which SVC opcodes are getting intercepted. Microcontroller profile
cores will need a new entry, since they use BKPT instead (and don't
have either SVC mode or an SPSR register).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Store a flag and errno in in "struct arm".
Have "poll" output report when semihosting is active.
Shrink some of the affected lines.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The newly moved flash TCL routines access the internals of the module
too much. Fix the layering issues by adding new core NOR flash APIs:
<flash/nor/core.h>:
- flash_driver_find_by_name() - self-descriptive
<flash/nor/imp.h>:
- flash_bank_add() - encapsulates adding banks to bank list
- flash_bank_list() - encapsulates retreiving bank list
This allows the externs in flash/nor/imp.h to be removed, and
these mechanisms may now be re-used by other flash module code.
Moves the top-level 'flash' command handlers into flash/nor/tcl.c,
with flash/nor/imp.h providing an internal implementation header
to share non-public API components.
After previous efforts, only one Jim routine remained in jtag/core.c,
and moving it to jtag/tcl.c painlessly finishes separating these layers.
The headers need separating, but the implementation is clean.
When calling module_register_commands, the return value needs to be
checked for failures. Instead of duplicating code, use an array of
function pointers to the identical registration functions to iterate
over during startup.
Semihosting enables code running on an ARM target to use the
I/O facilities on the host computer. The target application must
be linked against a library that forwards operation requests by
using the SVC instruction that is trapped at the Supervisor Call
vector by the debugger. The "hosted" library version provided
with CodeSourcery's Sourcery G++ Lite for ARM EABI is one example.
This is currently available for ARM9 processors, but any ARM
variant should be able to support this with little additional work.
Tested using binaries compiled with Sourcery G++ Lite 2009q1-161
and ARM RVCT 3.0.
[dbrownell@users.sourceforge.net: doc tweaks, NEWS]
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Updates the ARM NAND I/O code to look at and update the op
field of arm_nand_data to reflect the last operation performed.
It uses this field to copy the correct code to the target in the
case where the struct is used for reads and writes.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Modify the arm_nand_data struct to better support both read and
write operations while using the same struct. An additional
field was added, and initialized, to record the last operation
so that the correct code can be loaded to the working area.
[dbrownell@users.sourceforge.net: merge init patch, tweak GPL note]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Created a new function that handles sending a command and the address
information for pages to a NAND device.
[dbrownell@users.sourceforge.net: tweaked line lengths, name 'oob_only']
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Punt to the armv4_5_arch_state() for all the common stuff, to
shrink code and so we will get any improvements it provides.
Don't hide watchpoint status if we happen to be in "abort" mode.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
No point in both ARM11 and Cortex-A8 having private copies
of the logic sorting out e.g. DBG_REASON_WATCHPOINT.
Add and use a shared routine for this ... there's actually
a bunch more debug entry logic that could be shared, this
is just a start on that. Note that this routine fixes a
bug observed in the ARM11 code, where some abort mode quirks
were displayed as being an unknown debug reason; and also
silences needless ARM11 chatter.
Likewise with private copies of DSCR ... add one to the DPM
struct. Save it as part of setting DBG_REASON_* so later
patches can switch over to using that copy.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
For the bits now defined in "arm_dpm.h", switch to the
shared DSCR_* symbol and remove the ARM11_DSCR_* version.
Define DSCR_INT_DIS and use it instead of the ARM11_DSCR_*
sibling symbol. (Note: for both ARM11 and Cortex-A8, this
should arguably be enabled by default when single stepping.)
Remove some other unused declarations in "arm11.h".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Move the symbols for these bits from "armv7a.h" to "arm_dpm.h",
where they can be seen and used not just by Cortex-A but also
by the ARM11 (armv6) code.
Change them from bit numbers to bit masks ... this matches the
usage in ARM11 code, and also makes it easier to read.
Rename DSCR_EXT_INT_EN as DSCR_ITR_EN to match the docs; it's
enabling ITR functionality, not external interrupts, so this
changes the name to be less misleading. (There *IS* a bit
affecting interrupts, and this isn't it.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This makes Beagle work again, instead of losing horribly because
the JTAG event handlers are no longer able to e.g. "runtest". I
get the previous quirky behavior ... comes up OK but "reset halt"
somewhat mysteriously makes it all better. (Instead of nothing
being able to work at all...) However, I'm still seeing:
The 'init' command must be used before 'init'.
That seems to come from invoking "jtag init", sometime after it
gets mapped to "ocd_jtag init", according to debug message traces.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
To prevent regression in the behavior of 'init', we allow it to run in
any mode. If provided with -c init and with -c noinit, then the second
init at startup caused a spurious mode failure. Let 'init' handle it.
Use a separate variable for iterating GDB service port numbers than
the one set by the user. Restores the behavior of returning the
original port number and only incrementing the port used on success.
now compiles again after include files were moved about
to reduce -I usage and stop using quotes but rather
angle brackets for include files.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Before we can -I the top-level src/ directory alone, references to
"hello.h" must be updated. This is an internal header, so it does
not need angle brackets.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "xsvf.h"
the following form should be used.
#include <xsvf/xsvf.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "svf.h"
the following form should be used.
#include <svf/svf.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "pld.h"
the following form should be used.
#include <pld/pld.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "telnet_server.h"
the following form should be used.
#include <server/telnet_server.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "server.h"
the following form should be used.
#include <server/server.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "httpd.h"
the following form should be used.
#include <server/httpd.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "gdb_server.h"
the following form should be used.
#include <server/gdb_server.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "s3c24xx_regs.h"
the following form should be used.
#include <flash/nand/s3c24xx_regs.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "ocl.h"
the following form should be used.
#include <flash/nor/ocl.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "nand.h"
the following form should be used.
#include <flash/nand.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "mflash.h"
the following form should be used.
#include <flash/mflash.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "flash.h"
the following form should be used.
#include <flash/flash.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm_nandio.h"
the following form should be used.
#include <flash/arm_nandio.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "trace.h"
the following form should be used.
#include <target/trace.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "target_request.h"
the following form should be used.
#include <target/target_request.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "target.h"
the following form should be used.
#include <target/target.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "register.h"
the following form should be used.
#include <target/register.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "mips_ejtag.h"
the following form should be used.
#include <target/mips_ejtag.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "mips32_pracc.h"
the following form should be used.
#include <target/mips32_pracc.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "mips32.h"
the following form should be used.
#include <target/mips32.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "image.h"
the following form should be used.
#include <target/image.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "etm.h"
the following form should be used.
#include <target/etm.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "embeddedice.h"
the following form should be used.
#include <target/embeddedice.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "breakpoints.h"
the following form should be used.
#include <target/breakpoints.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "avrt.h"
the following form should be used.
#include <target/avrt.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "armv7m.h"
the following form should be used.
#include <target/armv7m.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "armv7a.h"
the following form should be used.
#include <target/armv7a.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "armv4_5_mmu.h"
the following form should be used.
#include <target/armv4_5_mmu.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "armv4_5_cache.h"
the following form should be used.
#include <target/armv4_5_cache.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "armv4_5.h"
the following form should be used.
#include <target/armv4_5.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm_jtag.h"
the following form should be used.
#include <target/arm_jtag.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm_dpm.h"
the following form should be used.
#include <target/arm_dpm.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm_adi_v5.h"
the following form should be used.
#include <target/arm_adi_v5.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm9tdmi.h"
the following form should be used.
#include <target/arm9tdmi.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm966e.h"
the following form should be used.
#include <target/arm966e.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm7tdmi.h"
the following form should be used.
#include <target/arm7tdmi.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm7_9_common.h"
the following form should be used.
#include <target/arm7_9_common.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm11.h"
the following form should be used.
#include <target/arm11.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "algorithm.h"
the following form should be used.
#include <target/algorithm.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "minidriver.h"
the following form should be used.
#include <jtag/minidriver.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "jtag.h"
the following form should be used.
#include <jtag/jtag.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "interface.h"
the following form should be used.
#include <jtag/interface.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "commands.h"
the following form should be used.
#include <jtag/commands.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "types.h"
the following form should be used.
#include <helper/types.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "time_support.h"
the following form should be used.
#include <helper/time_support.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "replacements.h"
the following form should be used.
#include <helper/replacements.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "membuf.h"
the following form should be used.
#include <helper/membuf.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "log.h"
the following form should be used.
#include <helper/log.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "jim.h"
the following form should be used.
#include <helper/jim.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "ioutil.h"
the following form should be used.
#include <helper/ioutil.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "fileio.h"
the following form should be used.
#include <helper/fileio.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "configuration.h"
the following form should be used.
#include <helper/configuration.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "command.h"
the following form should be used.
#include <helper/command.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "binarybuffer.h"
the following form should be used.
#include <helper/binarybuffer.h>
The exception is from .c files in the same directory.
Includes the src directory in the search path, so header files may be
migrated from:
#include "foo.h"
to
#include <module/foo.h>
which is more conducive for installation.
Moves JTAG interface drivers to src/jtag/drivers/,
Adds src/jtag/drivers/Makefile.am.
Builds libocdjtagdrivers.la.
Flattens the rlink driver files into the drivers/ directory, adding
the 'rlink_' prefix or '.rlink' suffix as appropriate.
Remove the remaining extra copy of DSCR, and the register cache
of which it was a part. That cache wasn't a very safe, or even
necessary, idea; it was essentialy letting debugger-private state
be manipulated by Tcl code that couldn't know how to do it right.
This makes the "reg" output of an ARM11 resemble what most other
ARM cores produce ... forward motion in the "make ARM11 work like
the rest of the ARM cores" Jihad!
Just store a clean copy of DSCR in the per-CPU struct, so we
trivially pass a pointer to a recent copy. This replaces the
previous "last_dscr" and cleans up most of the related calling
conventions ... but it doesn't remove the other DSCR copy.
Don't expose the WDTR register through the register cache any
more. If anyone wants Tcl scripts to be able to use DCC based
communication with app code in the target, this wouldn't do it.
Bugfix: don't trust the Tcl-accessible version of DSCR to
flag whether WDTR needs to be restored when resuming.
Don't expose the RDTR register through the register cache any
more. If anyone wants Tcl scripts to be able to use DCC based
communication with app code in the target, this wouldn't do it.
Bugfix: don't trust the Tcl-accessible version of DSCR to
flag whether RDTR needs to be restored when resuming.
Streamline arm11_on_enter_debug_state() entry:
- It should handle the standard updates:
* target->debug_reason
* target->state
- Don't waste time re-reading DSCR; just pass it in
Also rename the routine to "arm11_debug_entry()", matching the
convention used elsewhere in OpenOCD.
The new stubs for httpd and ioutil gave errors like:
ioutil_stubs.c: In function ‘ioutil_init’:
ioutil_stubs.c:27: error: implicit declaration of function ‘LOG_DEBUG’
ioutil_stubs.c:28: error: ‘ERROR_OK’ undeclared (first use in this function)
ioutil_stubs.c:28: error: (Each undeclared identifier is reported only once
ioutil_stubs.c:28: error: for each function it appears in.)
Fix.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Add httpd_stubs.c to provide no-op implementations of httpd_start()
and httpd_stop().
Allows these routines to be called unconditionally and ensures the
libocdserver ABI remains unchanged regardless of whether this feature
was built-in or not.
Prints a DEBUG message when the stub implementation is included.
Add ioutil_stubs.c to provide an empty ioutil_init() routine.
Add ioutil.h to prevent applications from needing to declare it.
Allows unconditionally calling that function during startup, and the
resulting libocdhelper library API is now more stable.
Prints a DEBUG message when the stub implementation is included.
Save and display the address of the instruction which triggered the
watchpoint. Because of pipelining, that's well behind the PC value
when debug entry completes. (Example in a subroutine that had been
returned from...)
Remove unused A8 stuff, mostly watchpoint hooks from the header.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Except for USR/SYS mode, the labels for the shadowed SP and LR
registers were reversed. LR is r14; SP is r13. Fix.
This would not affect GDB users; GDB references are positional.
Only folk working directly with OpenOCD register values would
have noticed this bug.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Actually this should handle both breakpoints and watchpoints ... but
the DPM framework only handles watchpoints for now. Works on Beagle.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This is a NOP unless the underlying core exposes two new methods, and
neither of the two cores using this (ARM11xx, Cortex-A8) do so yet.
This patch only updates those cores so they pass a flag saying whether
or not to update breakpoint and watchpoint status before resuming; and
removing some now-needless anti-segfault code from ARM11. Cortex-A8
didn't have that code ... yes, it segfaulted when setting watchpoints.
NOTE: this uses a slightly different strategy for setting/clearing
breakpoints than the ARM7/ARM9/etc code uses. It leaves them alone
unless it's *got* to change something, to speed halt/resume cycles
(including single stepping).
ALSO NOTE: this under-delivers for Cortex-A8, where regions with size
up to 2 GBytes can be watched ... it handles watchpoints which ARM11 can
also handle (size 1/2/4 bytes). Should get fixed later.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
In embedded hosts, the Jim interpreter can come from the
existing context rather than be created by OpenOCD.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
We don't need this code, now that the DPM code handles it.
Neither do we need the ARMv7-A CP15 operations; remove their
remnants too. And disable a mostly-needless diagnostic.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Instead of having separate ARM11 and Cortex-A8 implementations of
this code, have one shared implementation which just builds on the
existing "run instruction via R0" support.
This enables followup patches to remove that now-unused code from
those two drivers. (Patches to move the "mrc" and "mcr" code into
"struct arm" are due too ... MIPS and other cores do not support
those ARM-specific concepts.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Switch "mrc" and "mcr" commands to be toplevel ARM operations,
as they should initially have been.
Correct the usage message for both commands: it matches ARM
documentation (as one wants!) instead of reordering them to
match the funky mrc() and mcr() method usage (sigh).
For Cortex-A8: restore a line that got accidentally dropped,
so the secure monitor mode shadow registers will show again.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The ARMv7-A code uses read_cp15() to access fault registers.
Instead, use DPM operations directly, passing in the relevant
MRC instructions.
This eliminates per-operation overhead (though it'll be hard
to observe, this is uncommon) and helps eliminate read_cp15().
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
There were two chunks of Cortex-A8 code which called the
ARMv7-A CP15 operations; get rid of them, helping prepare
to remove those methods completely:
- post_debug_entry() can use the mrc() method to read
its two registers.
- write_memory() can use dpm->instr_write_data_r0() to
flush the ICache and DCache ... doing it this way is
actually faster since it reduces per-write overhead.
Note that the mrc() method parameters are re-ordered with
respect to the ARM instruction documentation, so that part
can be confusing.
Cleaned up the layout and comments in those areas a bit.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
There is no particular reason to invoke jtag_interface_quit()
on the atexit() handler, it just makes the code more obtuse
and stops other legitimate usage of atexit().
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Ensures that the correct information gets displayed, depending on the
mode of the command being denied. Fixes misreporting all commands as
needing to run "before 'init'".
Clean up two aspects to this routine: bad naming, since it
doesn't restore the context, just the banked registers; and
excess indentation for the bulk of the code.
Also make some of its call sites stash the function's return
code; someday they should use it for error checking.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This "loop over all registers" routine shared the same mess as
full_context() in terms of dozens of needless number_to_mode()
calls. Fix that, and comments, with related cleanup.
The misnamed xscale_restore_context() had a related bug. It
was restoring the *WRONG REGISTERS* ... always from whatever
the current mode was, instead of using the copy from whichever
register bank it was trying to restore. (But it marked the
intended register as having been restored...) Fixed that.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Finish removing references to the 'interp' global variable from the
command module, encapsulating all reference via command_context.
Eliminates use of the global entirely, so it can be removed. Hurrah!
Adds a log_capture_state structure to pass to the log capture
callback used by the command module. Ensures that the capture occurs
in the proper context.
The 'help' text will become more verbose, so its entire text will be
far more than desired when you only borked your syntax. The usage
still allows the commands to be looked up for more help.
command_done() does not need to return an error, but it needed
Doxygen comment. Provide some for copy_command_context as well.
Note: this audit revealed some potential bugs with the command context
implementation. There was a reason that commands were added at the
end of the list. Shallow copying of command_context means that
the list is shared between them. And commands added at the top-level
before the pre-existing commands will not be available in the shared
context as they were before. Yikes!
Fortunately, this does not seem to occur in general use, as
'add_help_text' gets registered in startup.tcl and claims the first slot
in my own test cases. Thus, it seems that we have been masking the issue
for now, but it shows the need for further architectural improvement in
the core command module.
With the ability to defer 'init', users can access the help system while
still in CONFIG mode. This patch omits commands from the help and usage
list when they cannot be run in the current command mode, making it much
easier to see what can be done at a given time.
Adds 'noinit' command to prevent OpenOCD from running 'init' at the end
up startup, allowing it to be given from telnet or TCL. This provides
the old behavior by default, and users can add this command to their
scripts to get the new behavior.
Moves the telnet and TCL server startup to server_init(), moving their
respective command registration in to server_register_commands().
Adds proper error checking for these particular startup processes.
Moves the core server startup to openocd_main(), improving related error
checking and preparing to defer 'init'.
Rework gdb_init to create flexible APIs (gdb_target_add_{one,all}) and
static helper (gdb_target_start) for starting GDB services. Eliminates
duplicated code and provides general mechanisms for adding GDB services.
The 'init' command is updated to call the new API, and later patches can
decouple its policy of adding all targets therein.
Provides the new capability to use both piped and TCP servers when
multiple targets are defined. The first target fills the pipe, and
others will be started on TCP ports (unless disabled, i.e. gdb_port=0).
Add missing COMMAND_REGISTRATION_DONE.
For now the command syntax for zy1000 needs to be compatible
across 0.3/0.4, the world outside OpenOCD interfaces to
zy1000 using the old syntax. Post 0.4 release(0.4.1 even)
I'll switch to subcommand scheme.
Switch to subcommands post 0.3 lifecycle.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Streamline the loop by continuing as soon as we know there's no
work to be done; this lets us un-indent almost everything.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
When fetching all the registers, XScale was doing various stupid
things like calling number_to_mode() a few dozen times instead of
just once, and mapping access to each register three times (again,
instead of just once). Stop that.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Use the new mapping interfaces in the debug entry path.
SPSR and the banked registers now have smaller and faster
accessors ... use them.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Code other than main() may invoke "init". When it does so,
customized handlers may need to run ... so make sure the
command context state is updated before they do so.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Those commands presume support for the "classic" set of CPU
modes (FIQ, supervisor, IRQ, etc) ... which aren't supported
by the ARMv7-M or ARMv6-M architectures. They also presume
a "struct arm" base type, which this code doesn't use.
We haven't cleaned up the register handling enough to be able
to share any of those "base" methods.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell
Spencer Oliver
Rafael Campos Las Heras
Øyvind Harboe
Zachary T Welch
Mathias Kuester
Nicolas Pitre
Dean Glazeski
Marek Vasut
lementec fabien