riscv
/
yosys
mirror of https://github.com/YosysHQ/yosys.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
4,517 Commits 76 Branches 48 Tags 62 MiB
Commit Graph

539 Commits

Author SHA1 Message Date
Eddie Hung c492a3a1c4 write_xaiger duplicate inout port into out port with $inout.out suffix 2019-02-25 18:39:36 -08:00
Eddie Hung 292f80d231 Cleanup abc9 code 2019-02-25 15:20:56 -08:00
Eddie Hung 5180338e80 write_xaiger to write __dummy_o__ for -symbols too 2019-02-21 17:03:18 -08:00
Eddie Hung 085ed9f487 Add attribution 2019-02-21 14:40:13 -08:00
Eddie Hung 2f96a0ed32 write_xaiger to use original bit for co, not sigmap()-ed bit 2019-02-21 11:15:25 -08:00
Eddie Hung 01f8d50ba2 Remove swap file 2019-02-20 16:17:01 -08:00
Eddie Hung f89b112fbf write_aiger: fix CI/CO and symbols 2019-02-20 15:35:32 -08:00
Eddie Hung ef60ca1717 write_xaiger to not write latches, CO/PO fixes 2019-02-20 11:09:13 -08:00
Eddie Hung f9af902532 Merge branch 'master' into xaig 2019-02-19 14:20:04 -08:00
Eddie Hung 11480b4fa3 Instead of INIT param on cells, use initial statement with hier ref as 
per @cliffordwolf
 2019-02-17 12:18:12 -08:00
Eddie Hung 17cd5f759f Merge https://github.com/YosysHQ/yosys into dff_init 2019-02-17 11:49:06 -08:00
Eddie Hung 30f1204721 Cleanup 2019-02-16 22:22:17 -08:00
Eddie Hung 76c35f80f4 Cleanup 2019-02-16 21:09:48 -08:00
Eddie Hung 6a57de9013 write_xaiger to support non-bit cell connections, and cope with COs for -O 2019-02-16 21:00:39 -08:00
Eddie Hung b9a305b85d write_aiger -O to write dummy output as __dummy_o__ 2019-02-16 20:08:59 -08:00
Eddie Hung 0c409e6d8c Tidy up write_xaiger 2019-02-16 08:48:33 -08:00
Eddie Hung 2c1655ae94 write_aiger() to perform CI/CO post-processing and fix symbols 2019-02-16 08:46:25 -08:00
Eddie Hung 486a270415 Fixes needed for DFF circuits 2019-02-15 15:22:18 -08:00
Jim Lawson c245041bfe Removed unused variables, functions. 2019-02-15 12:00:28 -08:00
Eddie Hung 3ac5b65197 write_xaiger to cope with unknown cells by transforming them to CI/CO 2019-02-15 11:51:21 -08:00
Jim Lawson fc1c9aa11f Update cells supported for verilog to FIRRTL conversion. 
Issue warning messages for missing parameterized modules and attempts to set initial values.
Replace simple "if (cell-type)" with "else if" chain.
Fix FIRRTL shift handling.
Add support for parameterized modules, $shift, $shiftx.
Handle default output file.
Deal with no top module.
Automatically run pmuxtree pass.
Allow EXTRA_FLAGS and SEED parameters to be set in the environment for tests/tools/autotest.mk.
Support FIRRTL regression testing in tests/tools/autotest.sh
Add xfirrtl files to test directories to exclude files from FIRRTL regression tests that are known to fail.
 2019-02-15 11:14:17 -08:00
Eddie Hung c69fba8de5 More cleanup 2019-02-14 14:52:47 -08:00
Eddie Hung 7328775584 More cleanup of write_xaiger 2019-02-14 14:48:38 -08:00
Eddie Hung afa4389445 Get rid of formal stuff from xaiger backend 2019-02-14 13:27:26 -08:00
Eddie Hung f0f5d8a5cc Merge remote-tracking branch 'origin/read_aiger' into xaig 2019-02-13 14:09:36 -08:00
Eddie Hung 06cf0555ee Merge https://github.com/YosysHQ/yosys into xaig 2019-02-13 14:08:31 -08:00
Clifford Wolf 1f2548a564
Merge pull request #802 from whitequark/write_verilog_async_mem_ports 
write_verilog: correctly emit asynchronous transparent ports
 2019-02-12 14:41:34 +01:00
Eddie Hung ecd2446132 Add write_xaiger 2019-02-11 15:18:42 -08:00
Eddie Hung db08afe146 Copy backends/aiger/aiger.cc to xaiger.cc 2019-02-08 14:53:12 -08:00
Eddie Hung 20ca795b87 Remove check for cell->name[0] == '$' 2019-02-06 14:53:40 -08:00
Eddie Hung c373640a3a Refactor 2019-02-06 14:28:44 -08:00
Eddie Hung 8241db6960 write_verilog to cope with init attr on q when -noexpr 2019-02-06 14:17:09 -08:00
Clifford Wolf e112d2fbf5 Add missing blackslash-to-slash convertion to smtio.py (matching Smt2Worker::get_id() behavior) 
Signed-off-by: Clifford Wolf <clifford@clifford.at>
 2019-02-06 16:35:59 +01:00
whitequark da65e1e8d9 write_verilog: correctly emit asynchronous transparent ports. 
This commit fixes two related issues:
  * For asynchronous ports, clock is no longer added to domain list.
    (This would lead to absurd constructs like `always @(posedge 0)`.
  * The logic to distinguish synchronous and asynchronous ports is
    changed to correctly use or avoid clock in all cases.

Before this commit, the following RTLIL snippet (after memory_collect)

    cell $memrd $2
      parameter \MEMID "\\mem"
      parameter \ABITS 2
      parameter \WIDTH 4
      parameter \CLK_ENABLE 0
      parameter \CLK_POLARITY 1
      parameter \TRANSPARENT 1
      connect \CLK 1'0
      connect \EN 1'1
      connect \ADDR \mem_r_addr
      connect \DATA \mem_r_data
    end

would lead to invalid Verilog:

    reg [1:0] _0_;
    always @(posedge 1'h0) begin
      _0_ <= mem_r_addr;
    end
    assign mem_r_data = mem[_0_];

Note that there are two potential pitfalls remaining after this
change:
  * For asynchronous ports, the \EN input and \TRANSPARENT parameter
    are silently ignored. (Per discussion in #760 this is the correct
    behavior.)
  * For synchronous transparent ports, the \EN input is ignored. This
    matches the behavior of the $mem simulation cell. Again, see #760.
 2019-01-29 02:24:00 +00:00
Clifford Wolf 81581f24fc
Merge pull request #800 from whitequark/write_verilog_tribuf 
write_verilog: write $tribuf cell as ternary
 2019-01-27 09:23:41 +01:00
whitequark 3d7925ad9f write_verilog: write $tribuf cell as ternary. 2019-01-27 00:24:06 +00:00
whitequark 42c47a83da write_verilog: escape names that match SystemVerilog keywords. 2019-01-27 00:03:53 +00:00
Clifford Wolf 54dc33b905 Add "write_edif -gndvccy" 
Signed-off-by: Clifford Wolf <clifford@clifford.at>
 2019-01-17 13:33:11 +01:00
Clifford Wolf 6c5049f016 Fix handling of $shiftx in Verilog back-end 
Signed-off-by: Clifford Wolf <clifford@clifford.at>
 2019-01-15 10:55:27 +01:00
whitequark efa278e232 Fix typographical and grammatical errors and inconsistencies. 
The initial list of hits was generated with the codespell command
below, and each hit was evaluated and fixed manually while taking
context into consideration.

    DIRS="kernel/ frontends/ backends/ passes/ techlibs/"
    DIRS="${DIRS} libs/ezsat/ libs/subcircuit"
    codespell $DIRS -S *.o -L upto,iff,thru,synopsys,uint

More hits were found by looking through comments and strings manually.
 2019-01-02 13:12:17 +00:00
Larry Doolittle 99706b3bf4 Squelch a little more trailing whitespace 2018-12-29 12:46:54 +01:00
Clifford Wolf 23bb77867f Minor style fixes 
Signed-off-by: Clifford Wolf <clifford@clifford.at>
 2018-12-18 20:02:39 +01:00
makaimann abf5930a33 Add btor ops for $mul, $div, $mod and $concat 2018-12-17 10:45:17 -08:00
whitequark ca866d384e write_verilog: handle the $shift cell. 
The implementation corresponds to the following Verilog, which is
lifted straight from simlib.v:

    module \\$shift (A, B, Y);

    parameter A_SIGNED = 0;
    parameter B_SIGNED = 0;
    parameter A_WIDTH = 0;
    parameter B_WIDTH = 0;
    parameter Y_WIDTH = 0;

    input [A_WIDTH-1:0] A;
    input [B_WIDTH-1:0] B;
    output [Y_WIDTH-1:0] Y;

    generate
        if (B_SIGNED) begin:BLOCK1
            assign Y = $signed(B) < 0 ? A << -B : A >> B;
        end else begin:BLOCK2
            assign Y = A >> B;
        end
    endgenerate

    endmodule
 2018-12-16 18:46:32 +00:00
Clifford Wolf ddff75b60a
Merge pull request #736 from whitequark/select_assert_list 
select: print selection if a -assert-* flag causes an error
 2018-12-16 16:45:49 +01:00
whitequark fccaa25ec1 write_verilog: add a missing newline. 2018-12-16 15:22:34 +00:00
Clifford Wolf f481ad4d44
Merge pull request #729 from whitequark/write_verilog_initial 
write_verilog: correctly map RTLIL `sync init`
 2018-12-16 15:50:16 +01:00
Clifford Wolf 0b9bb852c6 Add yosys-smtbmc support for btor witness 
Signed-off-by: Clifford Wolf <clifford@clifford.at>
 2018-12-10 03:43:07 +01:00
Clifford Wolf 47a5dfdaa4 Add "yosys-smtbmc --btorwit" skeleton 
Signed-off-by: Clifford Wolf <clifford@clifford.at>
 2018-12-08 06:59:27 +01:00
Clifford Wolf ed3c57fad3 Fix btor init value handling 
Signed-off-by: Clifford Wolf <clifford@clifford.at>
 2018-12-08 06:21:31 +01:00