- src/jtag/drivers/ftdi.c:
```
++<<<<<<< HEAD
+ int i;
+ static const uint8_t zero;
++=======
+ uint8_t zero = 0;
++>>>>>>> ocd_upstream
```
Decided to choose the latter.
- src/target/riscv/riscv-013.c:
```
++<<<<<<< HEAD
+ int abs_chain_position;
+ /* The base address to access this DM on DMI */
+ uint32_t base;
++=======
+ unsigned int abs_chain_position;
+
++>>>>>>> ocd_upstream
```
Decided to choose the latter (abs_chain_position is unsigned now)
- src/target/riscv/batch.c:
```
++<<<<<<< HEAD
++=======
+ void dump_field(int idle, const struct scan_field *field)
+ {
...
+ }
++>>>>>>> ocd_upstream
```
dump_field function is not needed anymore
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
Also avoid receiving data if the value is discarded on the call-site.
Change-Id: Ied87b551536a00d9fad469b9843cccae1976e6b6
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
* Register file examination is separated.
* Allow to access registers through cache as early as possible to re-use
general register access interface and propely track state of the
register.
* Reduces the number of operations: S0 and S1 are saved/restored only
when needed (targets without abstract CSR access).
Change-Id: I2e205ae4e88733a5c792f8a35cf30325c68d96b2
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
The telnet 'exit' command is only available in the execution phase of
OpenOCD. Thus, a telnet session cannot be closed via 'exit' if OpenOCD
is started with 'noinit'. Make the 'exit' command always available.
Change-Id: I14447ecde63e579f1c523d606f048ad29cc84a35
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8379
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Do not echo the selected transport to avoid stray and confusing
messages in the output of OpenOCD. For example, the "swd" line here:
Open On-Chip Debugger 0.12.0+dev-00559-ge02f6c1b9-dirty
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
swd
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
While at it, fix some small documentation style issues.
Change-Id: Ie85426c441289bbaa35615dbb7b53f0b5c46cfc0
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8217
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The 'orig_instr' information of software breakpoints is incorrect
because buf_to_hex_str() expects the length of the buffer to be
converted in bits and not bytes.
Change-Id: I9a9ed383a8c25200d461b899749d5259ee4c6e3d
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8218
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
While at it, apply some coding style fixes.
Change-Id: I77a6917a045af733ebe9211ca338952dbd49c89b
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8416
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
This patch modifies as little code as possible in order to simplify the
review. Data types that are affected by these changes will be addresses
in following patches.
While at it, apply coding style fixes if these are not too extensive.
Change-Id: I364467b88f193f8387623a19e6994ef77899d117
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8414
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch modifies as little code as possible in order to simplify the
review. Data types that are affected by these changes will be addresses
in following patches.
While at it, apply coding style fixes if these are not too extensive.
Change-Id: Idcbbbbbea2705512201eb326c3e6cef110dbc674
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8413
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch modifies as little code as possible in order to simplify the
review. Data types that are affected by these changes will be addresses
in following patches.
While at it, apply coding style fixes if these are not too extensive.
Change-Id: Ie048b3d472f546fecb6733f17f9d0f17fda40187
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8404
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This patch modifies as little code as possible in order to simplify the
review. Data types that are affected by these changes will be modified
in following patches.
Change-Id: I83921d70e017095d63547e0bc9fe61779191d9d0
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8403
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The jimtcl project supports pkg-config, use it for a simpler
configuration of compiler and linker flags and to enforce the minimum
required package version.
Since the jimtcl pkg-config file is not available on all systems, use
AC_CHECK_HEADER() as fallback.
Change-Id: I6fdcc818a8fdd205a126b0a46356434dbe890226
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8383
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Remove the hyphen from "pre-verify" in usage text.
Add preverify to the help text and procedure comment
Change-Id: I6d96e78ca84d99929300d461e435f5b4ce07b5db
Signed-off-by: Grant Ramsay <grant.ramsay@hotmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8376
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Scan-build is unable to detect that 'target->dbg_msg_enabled' does
not change across the function cortex_m_fast_read_all_regs().
It incorrectly assumes that it can be false at the first check (so
'dcrdr' get not assigned) and it is true later on (when 'dcrdr'
get used).
This triggers a false positive:
src/target/cortex_m.c:338:12: warning:
3rd function call argument is an uninitialized value
[core.CallAndMessage]
retval = mem_ap_write_atomic_u32(armv7m->debug_ap, DCB_DCRDR, dcrdr);
Use a local variable for 'target->dbg_msg_enabled' so scan-build
can track it as not modified.
While there, change the type of 'target->dbg_msg_enabled' to
boolean as there is no reason to use uint32_t.
Change-Id: Icaf1a1b2dea8bc55108182ea440708ab76396cd7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8391
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
STM32U53/U54x devices are similar to U57/U58x devices
with 2 flash banks up to 256 KB each
Change-Id: I774ef0df4dddac5f06bbfc2e6c3fc2e628d2249e
Signed-off-by: FBOSTM <fedi.bouzazi@st.com>
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@st.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7515
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
STM32U59/U5Ax devices are similar to U57/U58x devices
with 2 flash banks up to 2 MB each
while at there update STM32U57x/U58x revisions
Change-Id: I7e5c1700acf8c9fda34f660c9274bfd8bcb1381b
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6875
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* Eliminates the use of VLA, which is prohibited by `doc/manual
/style.txt`:
Link: c6bb902629/doc/manual/style.txt (L164-L166)
* Unifies DMI access interface.
* Reduces code duplication.
Change-Id: I2d7b0595f171e21062049ff61f76fb5a3c992d11
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
As defined in `target/target.h`, `coreid` is the index of the target on
the TAP, so, if an SMP group includes targets from multiple TAPs, it can
not be used as the base for `threadid`.
Change-Id: Ied7cfa42197aaf4908ef6628c6436f28d4856ebe
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7957
Tested-by: jenkins
Reviewed-by: Mark Zhuang <mark.zhuang@spacemit.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use a command group 'tcl' with subcommands instead of individual
commands with 'tcl_' prefix.
The old commands are still available to ensure backwards compatibility,
but are marked as deprecated.
Change-Id: I1efd8a0e2c1403833f8cb656510a54d5ab0b2740
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8344
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Use a command group 'gdb' with subcommands instead of individual
commands with 'gdb_' prefix.
The old commands are still available to ensure backwards compatibility,
but are marked as deprecated.
Change-Id: I037dc58554e589d5710cf46924e0a00f863aa300
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8336
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Added FT4232HA varianet of FTDI's FT4232H which has a different bcd.
Also added default PID/VID for the FT4243HA to contrib/60-openocd.rules.
And added default PID/VIDs for FTDI's HP ICs to contrib/60-openocd.rules
as this wasn't done previously.
BugLink: https://sourceforge.net/p/openocd/tickets/410/
Change-Id: Ia84b566aa004332d3f7815a3d22ac37eee4f522a
Signed-off-by: Jonathan Forrest <jonyscathe@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8225
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The function str_to_buf() was too benevolent and did
not perform sufficient error checking on the input
string being parsed. Especially:
- Invalid numbers were silently ignored.
- Out-of-range numbers were silently truncated.
The following commands that use str_to_buf()
were affected:
- reg (when writing a register value)
- set_reg
- jtag drscan
This pull request fixes that by:
- Rewriting str_to_buf() to add the missing checks.
- Adding function command_parse_str_to_buf() which can
be used in command handlers. It parses the input
numbers and provides user-readable error messages
in case of parsing errors.
Examples:
jtag drscan 10 huh10
- Old behavior: The string "huh10" is silently
converted to 10 and the command is then executed.
No warning error or warning is shown to the user.
- New behavior: Error message is shown:
"'huh10' is not a valid number"
reg pc 0x123456789
Assuming the "pc" is 32 bits wide:
- Old behavior: The register value is silently
truncated to 0x23456789 and the command is performed.
- New behavior: Error message is shown to the user:
"Number 0x123456789 exceeds 32 bits"
Change-Id: I079e19cd153aec853a3c2eb66953024b8542d0f4
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8315
Tested-by: jenkins
Reviewed-by: Marek Vrbka <marek.vrbka@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The driver code works reliably, no need to use assert() everywhere.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Idb1942bfd31d370a74610b8a8836bc2e64370557
Reviewed-on: https://review.openocd.org/c/openocd/+/8324
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
nrf5_auto_probe() always re-probed chip hardware to
get flash geometry.
Introduce nrf5_probe_chip() and move chip related probing to it.
Save all flash parameters needed for bank setup to struct nrf5_info.
Introduce nrf5_setup_bank() and move bank setup code to it.
Call both chip probe and bank setup unconditionally from nrf5_probe():
in case of manual issuing 'flash probe' command, we should refresh actual
values from the device.
Call chip probe and bank setup only if not done before from
nrf5_auto_probe().
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ib090a97fd7a41579b3d4f6e6634a5fdf93836c83
Reviewed-on: https://review.openocd.org/c/openocd/+/8322
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
ARM documentation for Cortex-M reports the field 'implementer' in
the register CPUID.
OpenOCD used the miss-spelled 'implementor'. Fix it!
Change-Id: I854d223971ae7a49346e1f7491c2c0415f5e2c1d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8318
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Add Cortex-M52 to the list of known Cortex-M implementations to
allow detection of the core.
Values checked against the ARM document "Arm China Cortex®-M52
Processor Technical Reference Manual" 102776_0002_06_en.
Reported-by: Joseph Yiu <Joseph.Yiu@arm.com>
Change-Id: Id0bde8a0476f76799b7274835db9690f975e2dd6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8317
Tested-by: jenkins
The detection of Cortex-M STAR-MC1 was introduced with [1], at a
time when OpenOCD was only checking the field PartNo of the CPUID
register.
Later-on [2], OpenOCD extended the check to the field implementer
of CPUID register. The value for ARM (0x41) implementer was used
to all the Cortex-M, but no feedback for STAR-MC1 was available. A
comment reporting the possible mismatch was added.
As reported on OpenOCD mailing-list, the technical reference manual
for STAR-MC1 is now available [3] and it reports the implementer
as ARM China (0x63) [3].
Fix the STAR-MC1 implementer accordingly.
Reported-by: Joseph Yiu <Joseph.Yiu@arm.com>
Change-Id: I8ed1064a847b73065528ee7032be967b5c58b431
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Link: [1] 7dc4be3157 ("target/arm: Add support with identify STAR-MC1")
Fixes: [2] 05ee889155 ("target/cortex_m: check core implementor field")
Link: [3] https://www.armchina.com/download/Documents/Application-Notes/Technical-Reference-Manual?infoId=160
Reviewed-on: https://review.openocd.org/c/openocd/+/8316
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Use a command group 'hla' with subcommands instead of individual
commands with 'hla_' prefix.
The old commands are still available to ensure backwards compatibility,
but are marked as deprecated.
Change-Id: I612e3cc080d308735932aea0f11001428eadc570
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8335
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add space around math operators.
Change-Id: I50fce3da283a78ba02bf70b6a752f7bf778d79f5
Signed-off-by: Mark Zhuang <mark.zhuang@spacemit.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7585
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The flag '-coreid' is used by the command 'target create' to
specify the debug controller of the target, either in case of a
single debug controller for multiple CPU (e.g. RISC-V harts) or
in case of multiple CPU on a DAP access port (e.g. Cortex-A SMP
cluster).
It is also currently used to specify the CPU ID in a SMP cluster,
but this is going to be reworked.
This flag has no effects on Cortex-M; ARM specifies that only one
CPU Cortex-M can occupy the DAP access port by using hardcoded
addresses.
The flash driver 'psoc6' uses the flag '-coreid' to detect if the
current target is the Cortex-M0 on AP#1 or the Cortex-M4 on AP#2
in the SoC.
There are other ways to run such detection, without using such
unrelated '-coreid' flag, e.g. using the AP number or the arch
type of the target.
Use the arch type to detect Cortex-M0 (ARM_ARCH_V6M) vs Cortex-M4
(ARM_ARCH_V7M).
Drop the flags '-coreid' from the psoc6 configuration file.
Change-Id: I0b9601c160dd4f2421a03ce6e3e7c55c6212f714
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8128
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reduces the number of JTAG queue flushes.
Change-Id: Id103f5da1a3ea3177447046711e0e62a22c98c75
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Parshintsev Anatoly
Evgeniy Naydanov
Evgeniy Naydanov
Marc Schink
Grant Ramsay
Antonio Borneo
Tarek BOCHKATI
Tarek BOCHKATI
Jonathan Forrest
Jan Matyas
Tomas Vanek
Ian Thompson
Mark Zhuang
Tommy Murphy