Commit Graph

466 Commits

Author SHA1 Message Date
Jannis Harder 1698202ccc sim: For yw cosim, drive parent module's signals for input ports 2023-02-13 12:26:06 +01:00
Jannis Harder afac3f2c76 formalff: Fix crash with _NOT_ gates in -hierarchy mode 2023-01-25 12:55:29 +01:00
Jannis Harder d6c7aa0e3d sim/formalff: Clock handling for yw cosim 2023-01-11 18:07:16 +01:00
Jannis Harder 7ddec5093f sim: Improvements and fixes for yw cosim
* Fixed $cover handling
  * Improved sparse memory handling when writing traces
  * JSON summary output
2023-01-11 18:07:16 +01:00
Jannis Harder dda972a148 sim: New -append option for Yosys witness cosim
This is needed to support SBY's append option.
2023-01-11 18:07:16 +01:00
Jannis Harder 2dd5652215 sim: Add Yosys witness (.yw) cosimulation 2023-01-11 18:07:16 +01:00
Jannis Harder f6458bab70 sim: Only check formal cells during gclk simulation updates
This is required for compatibility with non-multiclock formal semantics.
2023-01-11 18:07:16 +01:00
Jannis Harder 9c6198a827 sim: Internal API to set $initstate
This is not yet added to any of the simulation drivers.
2023-01-11 18:07:16 +01:00
Jannis Harder 44b26d5c6d sim: Emit used memory addresses as signals to output traces
This matches the behavior of smtbmc.

This also updates the sim internal memory API to allow masked writes
where State::Sa bits (internal don't care - not a valid value for a
signal) leave the memory content unchanged.
2023-01-11 18:07:16 +01:00
Claire Xen 843f329b96
Merge branch 'master' into claire/eqystuff 2023-01-11 16:33:08 +01:00
Jannis Harder 5abaa59080
Merge pull request #3537 from jix/xprop
New xprop pass
2023-01-11 16:26:04 +01:00
Miodrag Milanovic 5801152779 Deprecate gcc-4.8 2023-01-11 09:54:19 +01:00
Claire Xenia Wolf 6d56d4ecfc Merge branch 'master' of github.com:YosysHQ/yosys into claire/eqystuff 2023-01-11 04:10:12 +01:00
Miodrag Milanovic e3c0fd8b10 qbfsat support for cvc5, fixes #3608 2023-01-09 16:14:01 +01:00
Claire Xenia Wolf 1bc832a8e1 Allow non-unique modules without state in sim writeback-mode
Signed-off-by: Claire Xenia Wolf <claire@clairexen.net>
2022-12-21 10:43:02 +01:00
Jannis Harder 967529abb1 formalff: Proper error messages on async inputs for the -clk2ff mode 2022-12-09 15:25:40 +01:00
Claire Xenia Wolf dc14def5f3 Add gold-x handing to miter cross port handling
Signed-off-by: Claire Xenia Wolf <claire@clairexen.net>
2022-12-08 22:14:16 +01:00
Jannis Harder eb0039848b miter: Add -make_cover option to cover each output pair difference 2022-11-30 19:01:28 +01:00
Jannis Harder 551ca7f97f formalff: Fix -ff2anyinit assertion error for fine FFs 2022-11-30 19:01:28 +01:00
Jannis Harder 5ff69a0fe2 sim: Improved global clock handling 2022-11-30 18:50:53 +01:00
Jannis Harder ed0e14820e sat: Add -set-def-formal option to force defined $any* outputs 2022-11-28 14:50:52 +01:00
KrystalDelusion a14dec79eb
Rst docs conversion (#3496)
Rst docs conversion
2022-11-15 12:55:22 +01:00
Jannis Harder 9b4fba3870 sim: Run a comb-only update step to set past values during FST cosim
The previous approach only initialized past_d and past_ad while for FST
cosim we also need to initialize the other past values like past_clk,
etc. Also to properly initialize them, we need to run a combinational
update step in case any of the wires feeding into the FF are private or
otherwise not part of the FST.
2022-11-07 14:09:33 +01:00
Claire Xenia Wolf a4eb7e41c0 Add extra time at the end of a sat VCD trace
Otherwise the final values will not show up in gtkwave waveforms
when looking at the generated traces.

Signed-off-by: Claire Xenia Wolf <claire@clairexen.net>
2022-11-01 17:51:46 +01:00
Claire Xenia Wolf d04c17fd58 Add miter -cross option 2022-10-24 23:23:33 +02:00
Jannis Harder 925f92918a clk2fflogic: Always correctly handle simultaneously changing signals
This is a complete rewrite of the FF replacing code.

The previous implementation tried to implement the negative hold time by
wrapping async control signals individually with pulse stretching. This
did not correctly model the interaction between different simultaneously
changing inputs (e.g. a falling ALOAD together with a changing AD would
load the changed AD instead of the value AD had when ALOAD was high; a
falling CLR could mask a raising SET for one cycle; etc.).

The new approach first has the logic for all updates using only sampled
values followed by the logic for all updates using only current values.
That way, e.g., a falling ALOAD will load the sampled AD value but a
still active ALOAD will load the current AD value.

The new code also has deterministic behavior for the initial state: no
operation is active when that operation would depend on a specific
previous signal value. This also means clk2fflogic will no longer
generate any additional uninitialized FFs.

I also documented the negative hold time behavior in the help message,
copying the relevant part from async2sync's help messages.
2022-10-07 16:04:51 +02:00
N. Engelhardt 47e73826e0 mutate: warn if less mutations possible than number requested 2022-10-05 10:59:38 +02:00
KrystalDelusion 9465b2af95 Fitting help messages to 80 character width
Uses the regex below to search (using vscode):
	^\t\tlog\("(.{10,}(?<!\\n)|.{81,}\\n)"\);

Finds any log messages double indented (which help messages are)
and checks if *either* there are is no newline character at the end,
*or* the number of characters before the newline is more than 80.
2022-08-24 10:40:57 +12:00
Jannis Harder f7023d06a2 sim: -hdlname option to preserve flattened hierarchy in sim output 2022-08-16 13:37:30 +02:00
Jannis Harder 4ad13c647e clk2fflogic: Generate less unused logic when using verific
Verific generates a lot of FFs with an unused async load and we cannot
always optimize that away before running clk2fflogic, so check for that
special case here.
2022-08-16 13:37:30 +02:00
Jannis Harder 95db5a9d38 formalff: New -setundef option
Find FFs with undefined initialization values for which changing the
initialization does not change the observable behavior and initialize
them. For -ff2anyinit, this reduces the number of generated $anyinit
cells that drive wires with private names.
2022-08-16 13:37:30 +02:00
Jannis Harder a5e1d3b997 formalff: Set new replaced_by_gclk attribute on removed dff's clks
This attribute can be used by formal backends to indicate which clocks
were mapped to the global clock. Update the btor and smt2 backend which
already handle clock inputs to understand this attribute.
2022-08-16 13:37:30 +02:00
Jannis Harder c0063288d6 Add the $anyinit cell and the formalff pass
These can be used to protect undefined flip-flop initialization values
from optimizations that are not sound for formal verification and can
help mapping all solver-provided values in witness traces for flows that
use different backends simultaneously.
2022-08-16 13:37:30 +02:00
Miodrag Milanovic f4a1906721 support file locations containing spaces 2022-08-08 20:30:50 +02:00
Jannis Harder 14ba50908b sim: Fix $anyseq in nested modules 2022-07-22 14:48:30 +02:00
Jannis Harder 5db542742b async2sync: turn FFs with const clks into gclk FFs with feedback
The formal backends do not support multiple clocks. This includes
constant clocks. Constant clocks do appear in what isn't a proper
multiclock design, for example when mapping not fully initialized ROMs.
As converting FFs with constant clocks to FFs using the global is doable
even in a single clock flow, make async2sync do this.
2022-06-30 12:09:04 +02:00
Jannis Harder 459941c8ff fmcombine: Add _gold/_gate suffix to memids 2022-06-03 21:52:28 +02:00
Mohamed A. Bamakhrama 1822be8792 Observe $TMPDIR variable when creating tmp files
POSIX defines $TMPDIR as containing the pathname of the directory where
programs can create temporary files. On most systems, this variable points to
"/tmp". However, on some systems it can point to a different location.
Without respecting this variable, yosys fails to run on such systems.

Signed-off-by: Mohamed A. Bamakhrama <mohamed@alumni.tum.de>
2022-05-27 15:06:53 +02:00
Miodrag Milanovic 8e02b3ca30 fix crash when no fst input 2022-05-04 11:21:39 +02:00
Miodrag Milanovic ad48639cdd Start restoring memory state from VCD/FST 2022-05-04 10:41:04 +02:00
Miodrag Milanovic 3730db4b98 AIM file could have gaps in or between inputs and inits 2022-05-02 11:18:30 +02:00
Miodrag Milanovic bbfdea2f8a Match $anyseq input if connected to public wire 2022-04-22 17:20:17 +02:00
Miodrag Milanovic 4d80bc24c7 Treat $anyseq as input from FST 2022-04-22 16:23:39 +02:00
Miodrag Milanovic 33f4009bb5 Last sample from input does not represent change 2022-04-22 13:46:11 +02:00
Miodrag Milanovic 83cad82b29 latches are always set to zero 2022-04-22 12:04:05 +02:00
Miodrag Milanovic c989adcc2d If not multiclock, output only on clock edges 2022-04-22 12:03:39 +02:00
Miodrag Milanovic 75032a565d Set init state for all wires from FST and set past 2022-04-22 11:57:39 +02:00
Miodrag Milanovic 8fa2f3b260 Fix multiclock for btor2 witness 2022-04-22 11:53:41 +02:00
Miodrag Milanovic 9508bb2330 Fix reading aiw from other solvers 2022-04-15 11:45:16 +02:00
Miodrag Milanovic 868409361c Use wrap_async_control_gate if ff is fine 2022-04-08 16:30:29 +02:00