..
__uprj_analog_netlists.v
Seeding with documentation of pinout and verilog RTL (mostly unchanged
2021-10-12 16:31:42 -04:00
__uprj_netlists.v
Seeding with documentation of pinout and verilog RTL (mostly unchanged
2021-10-12 16:31:42 -04:00
__user_analog_project_wrapper.v
Seeding with documentation of pinout and verilog RTL (mostly unchanged
2021-10-12 16:31:42 -04:00
__user_project_wrapper.v
Seeding with documentation of pinout and verilog RTL (mostly unchanged
2021-10-12 16:31:42 -04:00
caravan.v
Corrects four signal routes which were missing from the caravan top level ( #88 )
2022-04-25 08:50:55 -07:00
caravan_netlists.v
Added a reference to the new file "gl/mgmt_defines.v" in the
2021-12-24 11:46:34 -05:00
caravan_openframe.v
Renamed the poorly and awkwardly named "sky130_fd_sc_hvl__lsbufhv2lv_1_wrapped"
2021-10-31 21:43:09 -04:00
caravel.v
Corrected the issue reported on the github issue tracker ( #34 ) ( #50 )
2022-04-07 07:44:57 -07:00
caravel_clocking.v
Changed the synchronized reset to occur on the clock falling edge
2021-12-02 14:26:59 -05:00
caravel_netlists.v
Added a reference to the new file "gl/mgmt_defines.v" in the
2021-12-24 11:46:34 -05:00
caravel_openframe.v
Renamed the poorly and awkwardly named "sky130_fd_sc_hvl__lsbufhv2lv_1_wrapped"
2021-10-31 21:43:09 -04:00
chip_io.v
A handful of changes/corrections: (1) Housekeeping signal "user_clock"
2021-12-06 19:38:24 -05:00
chip_io_alt.v
Caravan top lvs ( #67 )
2022-04-14 15:05:16 -07:00
clock_div.v
Fixed one bad error in clock_div which had been done without my
2021-12-06 21:37:51 -05:00
defines.v
Update storage testbench to work with one 2K block
2021-11-12 17:14:21 +02:00
digital_pll.v
fixes for RTL testbenches with mgmt core wrapper
2021-12-05 10:11:10 -08:00
digital_pll_controller.v
Seeding with documentation of pinout and verilog RTL (mostly unchanged
2021-10-12 16:31:42 -04:00
gpio_control_block.v
Fix syntax error in gpio_control_block ( #60 )
2022-04-09 00:24:51 -07:00
gpio_defaults_block.v
Implemented a system for setting the GPIO power-on defaults through
2021-10-23 17:18:30 -04:00
gpio_logic_high.v
Seeding with documentation of pinout and verilog RTL (mostly unchanged
2021-10-12 16:31:42 -04:00
housekeeping.v
This (late and invasive) change modifies the housekeeping block to
2021-11-29 14:23:30 -05:00
housekeeping_spi.v
Modified the housekeeping SPI to generate a read strobe (or rather
2021-10-23 22:06:24 -04:00
mgmt_protect.v
Revised the management protect block to include protections against
2021-10-27 19:36:43 -04:00
mgmt_protect_hv.v
Seeding with documentation of pinout and verilog RTL (mostly unchanged
2021-10-12 16:31:42 -04:00
mprj2_logic_high.v
Seeding with documentation of pinout and verilog RTL (mostly unchanged
2021-10-12 16:31:42 -04:00
mprj_io.v
A handful of changes/corrections: (1) Housekeeping signal "user_clock"
2021-12-06 19:38:24 -05:00
mprj_logic_high.v
Revised the management protect block to include protections against
2021-10-27 19:36:43 -04:00
pads.v
A handful of changes/corrections: (1) Housekeeping signal "user_clock"
2021-12-06 19:38:24 -05:00
ring_osc2x13.v
Seeding with documentation of pinout and verilog RTL (mostly unchanged
2021-10-12 16:31:42 -04:00
simple_por.v
Modified simple_por.v RTL to avoid the wire declaration that "cvc"
2021-12-08 12:16:19 -05:00
spare_logic_block.v
Revised the spare logic block to make sure that all inputs are
2021-11-24 09:34:52 -05:00
user_defines.v
Split the layout of the GPIO defaults block into three versions, for the
2021-11-06 13:28:26 -04:00
user_id_programming.v
Implemented a system for setting the GPIO power-on defaults through
2021-10-23 17:18:30 -04:00
xres_buf.v
Renamed the poorly and awkwardly named "sky130_fd_sc_hvl__lsbufhv2lv_1_wrapped"
2021-10-31 21:43:09 -04:00
ad8d168555