OpenOCD fails in the presence of inactive/unresponsive cores
I faced with case when inactive core returns 0 while reading dtmcontrol.
This leads to failure on assert: "addrbits != 0" in "dbus_scan".
Also change "read_bits","poll_target" funcs to avoid a lot lines in logs
Change-Id: If852126755317789602b7372c5c5732183fff6c5
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Support assign DMI address of the debug module by pass
-dbgbase to the target create command
Change-Id: I774c3746567f6e6d77c43a62dea5e9e67bb25770
Signed-off-by: Mark Zhuang <mark.zhuang@spacemit.com>
This patch adds target logging to logging instances where it makes sense.
This is especially useful when debugging multiple targets at once,
such as multicore systems.
Change-Id: Ia9861f3fa0e6e5908b683c2a8280659c3c264395
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
Besides checkpatch, now upstream codes are scanning with
Sparse semantic checker tool.
This commit addresses some Sparse and checkpatch warnings.
Change-Id: I0e3e9f15220d8829c5708897af27aa86a8f90c07
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Below warnings are fixed.
1- A function declaration without a prototype is deprecated in all
versions of C [-Werror,-Wstrict-prototypes]
2- error: variable set but not used [-Werror,-Wunused-but-set-variable]
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I1cf14b8e5e3e732ebc9cacc4b1cb9009276a8ea9
Reviewed-on: https://review.openocd.org/c/openocd/+/7569
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Board config files, to allow communication with
the builtin USB-JTAG adapter.
Change-Id: I80fb0c36b3cc164940ff266f1eaa287d870da94d
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
ESP32-C6 and ESP32-H2 are single core riscv targets.
Change-Id: If92429de4fb67a040f303a54177d61b70e1ea281
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
This commit enhances code reusability, simplifies maintenance, and ensures
consistency across all chip configurations by consolidating commonly used
commands and variables into the common config file.
Change-Id: I825dd4fddb88e5514429d49ab13869ee6b9a28fc
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
This commit enhances code reusability, simplifies maintenance, and ensures
consistency across all chip configurations by consolidating commonly used
commands and variables into the common config file.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Ie3413d3149388b17bc0199409ce86d3eb7cf5ee2
Board config file for ESP32-S3, to allow communication with
the builtin USB-JTAG adapter.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I1310f5db30f7df38fe9344f7ba2334611b53863e
Reviewed-on: https://review.openocd.org/c/openocd/+/7749
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
This config file enables communication over USB-JTAG with
ESP32-C3, ESP32-S3, ESP32-H2 and ESP32-C6 chips
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Iceea26972588d8c4919d1f3248684ece48ca9121
Reviewed-on: https://review.openocd.org/c/openocd/+/7748
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit enhances code reusability, simplifies maintenance, and ensures
consistency across all chip configurations by consolidating commonly used
commands and variables into the common config file.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Ifb0122f3b98a767f27746409499733b70fb7d0e8
Reviewed-on: https://review.openocd.org/c/openocd/+/7747
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit enhances code reusability, simplifies maintenance, and ensures
consistency across all chip configurations by consolidating commonly used
commands and variables into the common config file.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I36c86fe4ebc99928ce48a5bff8cb9580a0fa3ac0
Reviewed-on: https://review.openocd.org/c/openocd/+/7746
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This commit enhances code reusability, simplifies maintenance, and ensures
consistency across all chip configurations by consolidating commonly used
commands and variables into the common config file.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I9181737d83eeba4e983b6a455b8a1523f2576dd2
Reviewed-on: https://review.openocd.org/c/openocd/+/7745
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Consolidate commonly used commands and variables from
chip config files into functions in esp_common.cfg.
This includes "jtag newtap," "target create,"and "configure -event."
Enhances code reusability and simplifies maintenance.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I9e8bf07a4a15d4544ceb564607dea66837381d70
Reviewed-on: https://review.openocd.org/c/openocd/+/7744
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The main reason is to populate the cache, so that pull requests can
benefit from a spike cache even the very first time. (Caches populated
in one pull request are inaccessible to another one.)
Change-Id: If894f2ccfaadc740bd52e34be3024153626b9fbd
Signed-off-by: Tim Newsome <tim@sifive.com>
This patch separates the Spike tests into their own jobs and makes them run
regardless of the results of the previous test. Previously, if Spike32
tests failed, Spike64-2 tests did not even run. This can be an issue if new
tests are added in the riscv-tests repository which are not yet passing
on riscv-openocd.
Change-Id: I0bdaee5fbbba5582babab40f176cfab49660c246
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
* Add a warning when eq trigger is setup and it's behavior is different
from other triggers.
* Make eq trigger's behavior consistent with other triggers in case of
length == 1.
* Fix a bug in setting chained triggers (LT, GT case).
* Improve logging.
Change-Id: Id1ed0d11971b8ed875afbb979e6c8a8b51dd3818
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
There were a couple of problems with previous implementation:
* Misalligned read would return ERROR_OK and print all zeroes.
* CMDERR_BUSY for abstract access was improperly handled:
According to the spec, no assumptions can be made about DM_DATA*
contents in such a case, but these were considered valid values from
memory.
* A fallback to one element read was implemented when DMI_STATUS_BUSY
occurred during batch reads, even though this can be accounted for.
Change-Id: I09174c61c951b2bb97a529b7f0aa5afaa995179b
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
1. update RISCV_MAX_HARTS to 2^20 according to SPEC
2. remove RISCV_MAX_REGISTERS, it's not used anywhere anymore
3. add parentheses
Change-Id: Iadf0fa1ba3bbe5b9420b8430883e140db87f4f9e
Signed-off-by: Mark Zhuang <mark.zhuang@spacemit.com>
If a target where a software breakpoint was set is not currently
available, but there are other targets in the same SMP group that are
available, then we can use those to remove the software breakpoint.
Change-Id: I9faa427c7b3aee31504e6e6599539e6f29b58d8f
Signed-off-by: Tim Newsome <tim@sifive.com>
According to section 5.6 in the RISC-V debug specification, the previous
way to set triggers was incorrect, as was discussed as part of
https://github.com/riscv/riscv-openocd/issues/870. This commit fixes the
sequence to be in line with the specification as well as adds some comments
to clarify for any future reader as to what is actually done.
Change-Id: Iffc5cc0f866a466a7aaa72a4c53ee95c9080ac9d
Signed-off-by: Marek Vrbka <marek.vrbka@codasip.com>
this functionality allows to query if a target belongs to some smp group
and to dynamically turn on/off smp-specific behavior
Change-Id: I469453d95e7c1640a91bc60d80c854404e508535
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
* rtos/FreeRTOS: solve some conflicting usage of thread id.
1.
There are some RISCV-specific usage of thread_id, which has conflict with upstream.
Some adaptions are made in this patch, to make sure OpenOCD is sending a clear thread list to gdb.
2.
Use freertos_read_struct_value for xSchedulerRunning.
Change-Id: I001a88a0c6d8eac98a389c0217b4897f28124840
Signed-off-by: Chao Du <duchao@eswincomputing.com>
* fix typo.
Change-Id: Id6546cc74de44bbee7e44b7cb29b769a2f35ec4a
* correct the data type.
Change-Id: I28c7e111e569d94ba5f6e1ae21745ddb34d4dd12
* changes as per the review comment.
Change-Id: Ica4c705a8f2657700dc27e24790287ca802480fd
* another macro replacement.
Change-Id: Ia9330fed32d917cf87804051ba1b8d6ac42cfb7b
---------
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Tim Newsome
Kirill Radkin
Mark Zhuang
Marek Vrbka
Erhan Kurubas
Evgeniy Naydanov
Parshintsev Anatoly
eolson
Chao Du