This was used to track which hart a given operation must apply to. But
we already have a target associated with each operation, and from there
we can find the desired hart id. dm013_info_t already tracks
current_hartid (meaning which hart ID is currently selected by the DM).
This makes the code simpler to understand. Also it turns out we don't
need to make sure the correct hart ID is currently selected because
there are only a few real entry points.
Change-Id: Ibe8d5e156523397f245edd6ec0a5df3239b717bf
Signed-off-by: Tim Newsome <tim@sifive.com>
According to RISC-V External Debug Support Version 0.13.2 (paragraph
3.12.6), cmderr field contains a valid value only if busy is 0, so it is
incorrect to analize it on timeout.
Requested in https://review.openocd.org/c/openocd/+/6964.
I'm making the change here so I have a chance to test it properly before
pushing it upstream.
A nice effect of this change is that we avoid some unnecessary polling
early on when gdb is connecting and we would poll once every time we
send gdb a qXfer packet.
Change-Id: I4bdb9f05839e8c1e01ff6dde49d6589595418095
Signed-off-by: Tim Newsome <tim@sifive.com>
Otherwise OpenOCD simply doesn't work without giving any indication why.
Change-Id: I21703fc1a0d9bed2f59da95f8a8395fe139484a4
Signed-off-by: Tim Newsome <tim@sifive.com>
* Don't read dmcontrol to set hartsel
We already know what dmcontrol should be. This addresses a long-standing
TODO. In a toy test, this reduced the number of scans by 10+%. (Most of
those are probably in poll(), so don't actually affect perceived
performance.)
Change-Id: I18e5ca391f0f5fb35f30d44dfef834e5a66aee20
Signed-off-by: Tim Newsome <tim@sifive.com>
* Make code easier to read
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
It was a left-over from `-rtos riscv` and isn't used.
Change-Id: Ie7e380600cd1331c6d382f654474270efad9f127
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Hopefully this will be the final version.
Change-Id: Ib2f8cd6f613c5e0f8e8bf7a16c3edbf2d9b439b2
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
See https://github.com/riscv/riscv-opcodes/pull/139
Change-Id: I77ae5ab369e6cde26ad44d177dcae38c0fbe08ef
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
Now we get the license comment on the first line, which is required.
Change-Id: I54414db3c89ee6027e159ce9348459bc923b8595
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Tim Newsome <tim@sifive.com>
If range's upper bound was equal to 2^64 or the range was wrapping around 0
(which is perfectly legal), writes were not performed due to riscv_addr_t
overflow.
This one doesn't have the license in there, which means now it's
acceptable to GPLv2 again.
Change-Id: I8ba27801172ffa955470d2627fa656cad282ee99
Signed-off-by: Tim Newsome <tim@sifive.com>
This gets us the new license header, which was requested upstream.
Change-Id: I992b4f3bb230edb9f281e2278dd41c712098ed4c
Signed-off-by: Tim Newsome <tim@sifive.com>
The segfault could be triggered if:
- At least one target failed to get examined (therefore does not have the
register cache set up yet),
- and "reset" TCL command was issued, which internally tries to
invalidate the register cache.
Minor cleanup: "registers_initialized" member removed from riscv_info_t
because it is not used anywhere.
Change-Id: I6288c0d4343ef6a330fb2a6b49d388e7eafa32a2
Signed-off-by: Jan Matyas <matyas@codasip.com>
* Update debug_defines from the spec.
Now it includes constants for field values, so use them instead of
duplicating that here.
Change-Id: I2fca6e89f25123c39d4bf483b8244e47aefb0f88
* Remove unused #defines
Change-Id: Id20351851c9ed2c3aa82ccf8c04b604bef11692a
* Use debug spec constants in a few more places
Change-Id: Ic4578729c89e3c6a26a72772e1635c5345bd6a52
Signed-off-by: Tim Newsome <tim@sifive.com>
* Use macros for trigger action types.
Which were added with the very latest debug_defines.h.
Change-Id: I47f73e11d2ec529c720f2e1df05f7b0d3026e43a
Signed-off-by: Tim Newsome <tim@sifive.com>
* Change set_haltgroup() to more general set_group()
Change-Id: Ib91a252ac63604e54b756f70c549ccd47241fd10
Signed-off-by: Tim Newsome <tim@sifive.com>
* Properly use enum.
Change-Id: I0edef6053fac388db38a22fe7557623fa93ec705
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
* Style changes suggested in review.
Change-Id: I29e83d3dbef09cb971ec0355aff733191a6e4679
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Commit 5ebb1bdea1 ("server/gdb: fix return of gdb remote monitor
command") replaces the call to command_run_line() with call to
Jim_EvalObj() but does not properly set the "context".
In multi-target environment, his can cause the erroneously
execution of the command on the wrong target.
Copy from the code in command_run_line() the proper setup before
executing Jim_EvalObj().
Change-Id: I56738c80779082ca146a06c01bc30e28bc835fd3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Bohdan Tymkiv <bohdan200@gmail.com>
Fixes: 5ebb1bdea1 ("server/gdb: fix return of gdb remote monitor command")
Per mainline, use stm32f1x instead. Tested that this is working.
Change-Id: Icda4b2a39e06e2adf9bbfb984bd578347f43d7d1
Signed-off-by: Tim Newsome <tim@sifive.com>
Conflicts:
tcl/target/gd32vf103.cfg
I kept our version, except I changed the flash device as happened in
mainline. Once this file settles down in mainline, we can copy it
wholesale into this fork.
Change-Id: I4c5b21fec0734b5e08eba392883e006a46386b1c
on macos (homebrew base) `pkg-config --cflags capstone` output with
`-I/opt/homebrew/Cellar/capstone/4.0.2/include/capstone`
gcc not find headers on parent "include" path,
causes build error `fatal error: 'capstone/capstone.h' file not found`
it's ok to change to <capstone.h> for all platforms.
Signed-off-by: fatalc <cnfatal@gmail.com>
Change-Id: Ia2e2058024d4fc1a57a8b4ea847c664d74f67efb
Reviewed-on: https://review.openocd.org/c/openocd/+/6946
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Handle JIM_CONTINUE return value of adiv5_jim_mem_ap_spot_configure(),
otherwise OpenOCD silently quits when an unknown option is provided.
Change-Id: I9b1351c0911e74999d8dd1260ede9760088510d7
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/6944
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The correct ordering is required to prevent two outputs connected
together.
Change-Id: I634a9ca7e0ccf337d1723011b8aee1f2d81efbcf
Signed-off-by: Steve Marple <stevemarple@googlemail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6937
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The SWDIO buffer requires a direction pin to select input or output
direction. Output is selected by a high logic level (matches
bcm2835gpio driver).
Change-Id: I240cb99a5dfea08121bb33d4b5e2108ce7597468
Signed-off-by: Steve Marple <stevemarple@googlemail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6936
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
According to GigaDevice user manuals the devices have OBRLD bit in FMC_CTL
register which is functionally compatible with OBL_LAUNCH @ FLASH_CR
of STM32 counterparts.
Change-Id: I84d231b38815fcb6452fd73b9153b269cce3b737
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6759
Tested-by: jenkins
Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
The device has compatible flash macro with STM32F1 family, reuse
stm32f1x driver code.
Detect non-ARM target - for simplicy test target type name 'riscv'
and the address has 32 bits.
In case of RISC-V CPU use simple chunked write algo - async algo
cannot be used as the core implemented in this device doesn't
allow memory access while running.
Change-Id: Ie3886fbd8573652691f91a02335812a7300689f7
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6704
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>
Zephyr plan to remove openocd specific symbols in favour
of more generic one.
These generic symbols has been introduced in Zephyr 2.6.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Change-Id: I89418c9c378fb8b8baa29763fc6f1b6e652dc7ef
Reviewed-on: https://review.openocd.org/c/openocd/+/6844
Tested-by: jenkins
Reviewed-by: Stephanos Ioannidis <root@stephanos.io>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixed the reading of p_flags in ELF64 segment headers - that field
is 64 bits wide.
Change-Id: I053ca57d36efb54b7c638484acd6c7a2fbcbd05a
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6927
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Current implementation for gdb remote monitor command uses the
command_run_line() to execute the command.
While command_run_line() has several advantages, it unfortunately
hides the error codes and outputs the result of the command
through LOG_USER(), which is not what gdb requires. See 'qRcmd' in
https://sourceware.org/gdb/onlinedocs/gdb/General-Query-Packets.html
Replace command_run_line() with Jim_EvalObj() and parse the output
to provide the proper result to gdb.
Can be tested by defining in OpenOCD:
proc a {} {return hello}
proc b {} {return -code 4}
proc c {} {return -code 4 "This is an error!"}
then by executing in gdb console:
monitor a
monitor b
monitor c
monitor foo
Change-Id: I1b85554d59221560e97861a499e16764e70c1172
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Torbjorn Svensson <torbjorn.svensson@st.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6886
Tested-by: jenkins
* riscv: Add a option to specify the JTAG TAP IR used to access the bscan tunnel.
Change-Id: Ice8798823313e2177e75473e62b06e7da74bbba2
Signed-off-by: Charles Papon <charles.papon.90@gmail.com>
* risc-v: Add litex doc about the set_bscan_tunnel_ir command
Change-Id: I1237213f32886d20fc7d60d5ca1e2124953eaeda
Signed-off-by: Dolu1990 <charles.papon.90@gmail.com>
* risc-v: remove tunnel ir length assert when ir is set by the user
Change-Id: I2b33fc6205f37461ff1bd15601b460a2467ea32b
Signed-off-by: Dolu1990 <charles.papon.90@gmail.com>
* Open riscv: Add a option to specify the JTAG TAP tunnel IR
Typo
Co-authored-by: Tim Newsome <tim@sifive.com>
* riscv: Add a option to specify the JTAG TAP tunnel IR
typo
Co-authored-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Tim Newsome <tim@sifive.com>
The current code locks the flash controller in case of error during
flash write only. An error in other flash operations may cause the
flash is left unlocked.
Implement locking also after error in erase, mass erase, options
write and erase.
Change-Id: I26c2ed7914e7847122306f29b777b9eefd1dc580
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6710
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
stm32x_wait_status_busy() has two side effects in case of flash programming error:
- reports error
- clears error bit in status register
Use stm32x_wait_status_busy() to report also flash error during target
algo flash write.
While on it use more descriptive error codes in stm32x_wait_status_busy().
Change-Id: I6e1cffc2aa5411b918a23ed62d5194910888a9d1
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6709
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Use target_get_working_area_avail() instead of try-fail iteration.
Call destroy_reg_param() in a for cycle.
Change-Id: I1891d1ffdea99010c6ab66b9578400b9d7922e20
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6708
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Mostly refactoring.
Rename original stm32x_write_block() to stm32x_write_block_async()
as it uses target async algo.
Introduce new stm32x_write_block() and move slow, host controlled
fallback flash write there.
The change allows stm32x_write_options() to use slow flash write fallback.
While on it rename variables where halfword count is stored.
Change-Id: I386ae15cf052b1490461ed8f7eea5b4403d466f7
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6706
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
When we debug a target that works as a USB device, halting
the target causes the USB communication with the USB host to
become unresponsive. The host will try to reconnect/reset/setup
the unresponsive device during which communication with other
devices on the same USB bus can get stalled for several seconds.
If the JTAG adapter is on the same bus, we need to make sure
openOCD will wait for packets at least as long as the host USB
stack. Otherwise the USB stack might deliver a valid packet, but
openOCD would ignore it due to the timeout. The xHCI spec uses 5
sec timeouts, so let's use that in openOCD with some margin.
Use this value in all libusb calls. HID API might have a libusb
backend and would probably be victim to the same bug, so it
should use this timeout, too.
Ticket: https://sourceforge.net/p/openocd/tickets/343/
Signed-off-by: Gabor Csapo <gaborcsapo@google.com>
Change-Id: Ia3dc1356e676fe550f57a4c72f7a24ba296b6af2
Reviewed-on: https://review.openocd.org/c/openocd/+/6882
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
- Print also the target name, not just the packet contents.
This is important when there are more GDB servers (more
debug-able targets) active in one OpenOCD session.
- Log also the received Ctrl-C requests coming from GDB
(one byte 0x3), ACKs ("+") and NACKs ("-").
- Do not print zero-length incoming packets (this occurred
when Ctrl-C packets were received).
- Removed a stray apostrophe "'" that got printed
in gdb_log_outgoing_packet()
Signed-off-by: Jan Matyas <matyas@codasip.com>
Change-Id: If68fe0a8aa635165d0bbe6fa0e48a4645a02da67
Reviewed-on: https://review.openocd.org/c/openocd/+/6879
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
To support 64 bits bit and masks
Replace local definition of BIT in rtos/chromium-ec
Change-Id: I1f268d6e8790f1b07bf798680b797878ce81064b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6857
Tested-by: jenkins
Including config.h as first is required for every C file.
Add it to the C files that still miss it.
Change-Id: I1a210e7d3a854958a85a290b086ad8a9f5176425
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6856
Tested-by: jenkins
While the documentation reports that SWO pin frequency can be
omitted to let the adapter autodetect the value, the code wrongly
drops an error when pin frequency is not specified.
Don't require the pin frequency to be set at "enable", but verify
that the adapter has properly changes it to a valid value.
Change-Id: I3dfbe3256e8887ef4f03512769b06381cdc9db0d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Karl Palsson <karlp@tweak.net.au>
Fixes: 184724d14e ("arm_tpiu_swo: add support for independent TPIU and SWO")
Reviewed-on: https://review.openocd.org/c/openocd/+/6310
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Commit dbbac5f11d ("semihosting: use open mode flags from GDB,
not from sys/stat.h") fixes the conversion of the mode flags from
ARM semihosting encoding for SEMIHOSTING_SYS_OPEN to GDB mapping
for open().
Doing this, it breaks the conversion to local host's OS mapping
for open().
Split the conversion array to one for GDB and one for local host.
The local host conversion array is taken directly from the old
code.
Change-Id: I385321ddd32c3ac5cf6da3f1ce9eff76b05dd527
Fixes: dbbac5f11d ("semihosting: use open mode flags from GDB, not from sys/stat.h")
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6870
Tested-by: jenkins
* Fix checkpatch workflow: ignore changes in .github/
Ignore changes in .github/ directory when running checkpatch.
Checkpatch emits false alarms on substrings "CC:" found in *.yml
workflow files, apparently thinking it is a "Cc:" signature in
commit message.
Change-Id: Id977d5a8838797e4676758066af4825651c41a87
* Fix: Set proper debug_reason in deassert_reset()
The issue was visible for example when user's .cfg file ended
with "reset halt" command:
In such case, the hart would remain halted but the debug_reason would not be
updated and may retain an incorrect value, e.g. DBG_REASON_NOTHALTED.
In such cases, gdb_last_signal() would provide an incorrect reply to GDB.
Change-Id: Ie6f050295fb5cbe9db38b189c4bc385662acf5b4
Signed-off-by: Jan Matyas <matyas@codasip.com>
* Fix checkpatch workflow: add 'apt-get update'
Change-Id: Ic5843ec86d16a187d01970a3253caade3d13b7ab
Signed-off-by: Jan Matyas <matyas@codasip.com>
Some configuration of GCC could default to -fno-inline, causing
the build to fail after commit fb43f1ff4e ("target: Rework 'set'
variable of break-/watchpoints").
Switch the new inline functions to 'static inline', as it's widely
used in the rest of the code.
Change-Id: I8bf31045a137bd34ed825f4b2a9338eb3c70046d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: fb43f1ff4e ("target: Rework 'set' variable of break-/watchpoints")
Reviewed-on: https://review.openocd.org/c/openocd/+/6881
Tested-by: jenkins
The 'set' variable name suggests a boolean data type which determines
whether a breakpoint (or watchpoint) is active. However, it is also
used to store the number of the breakpoint.
This encoding leads to inconsistent value assignments: boolean and
integer values are mixed. Also, associated hardware comparator
numbers, which are usually numbered from 0, cannot be used directly.
An additional offset is required to store the comparator numbers.
In order to make the code more readable and the value assignment more
consistent, change the variable name to 'is_set', its data type to 'bool'
and introduce a dedicated variable for the break-/watchpoint
number.
In order to make the review easier, the data types of various related
variables (e.g. number of breakpoints) are not changed.
While at it, fix a few coding style issues.
Change-Id: I2193f5639247cce6b80580d4c1c6afee916aeb82
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/6319
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Considering this use case: (using STM32 L5 or U5)
1- first probe : TZEN enabled, RDP level 0
flash_regs_base |= STM32L5_REGS_SEC_OFFSET => 0x50022000
2- the user promotes the RDP to level 0.5
3- the second probe, fails to read OPTR using secure flags_regs_base:
used OPTR address is 0x50022040
Step 3 fails because when RDP is level 0.5, we should use Non-Secure
flash registers.
To fix this, always use NS flash regs to read OPTR in probe functions.
Fixes: 80d323c6e8 (flash/stm32l4x: introduce auto-probe when OPTR is changed)
Change-Id: I296aa633972b0c410b927488c999584a07b912d3
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6864
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
ST-Link Server 2.1.0-1 fixes concurrency issue with RW_MISC command
Starting from this version the ST-Link Server API is now v3.
In this change we save the ST-Link Server version, and check if the
API is greater or equal to 3 to enable the queuing.
Change-Id: I239eb81024700514c607a269b66651f457206faa
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6876
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This command permits the usage of a TCP port to perform debug and stdio
operations:
- debug : READC, WRITEC and WRITE0
- stdio : READ, WRITE
This will permit the separation of semihosting message from OpenOCD log,
and separate semihosting messages per core.
syntax: arm semihosting_redirect (disable | tcp <port> [debug|stdio|all])
this allows to select which operations to be performed via TCP (debug,
stdio or all (default)).
Note: for stdio operations, only I/O from/to ':tt' file descriptors are
redirected.
tested using netcat on ubuntu
Change-Id: I37053463667ba109d52429d4f98bc98d0ede298d
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/5562
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
OpenOCD implements the GDB keep-alive by sending empty strings as
output for GDB client. This has been implemented as part of the
log framework, creating an odd dependency.
Move the keep-alive notifications out of log framework.
For the moment, keep keep_alive() inside log.c, but it should be
moved in server.c
This should also fix an old issue with KDE Konsole when tab alert
for activity is enabled. The empty strings is sent to all the
connections, including telnet, and causes the tab running OpenOCD
telnet to continuously show activity even when no new text is
printed. Anyway, I cannot replicate this issue anymore.
Change-Id: Iebb00b00fb74b3c9665d9e1ddd3c055275bfbd43
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6840
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
GDB client cannot always display generic messages from OpenOCD.
The callback gdb_log_callback() is continuously added and removed
to follow the GDB status and thus enabling/disabling sending the
OpenOCD output to GDB.
While this is a nice stress test for log_{add,remove}_callback(),
it is also a waste of computational resources that could impact
the speed of OpenOCD during GDB user interactions.
Add a connection-level flag to enable/disable the log callback and
simply change the flag instead of adding/removing the callback.
Use an enum for the flag instead of a bool. This improves code
readability and allows setting other states, e.g. keep-alive
through asynchronous notification https://review.openocd.org/4828/
Change-Id: I072d3c6928dedfd0cef0abe7acf9bdd4b89dbf5b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6839
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
To easily add new methods to a service, pass all the methods
through a struct.
While there, drop the typedef for the methods and add currently
unused new methods to support keep-alive and connections during
keep-alive.
No change in functionality.
Change-Id: I2b5e7140db95021f6e7201e9d631ee340c60b453
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6838
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
The value of this variable is not shared across functions, so the
variable can be local.
Change-Id: I00b0444209e81c07bb57fb732f47052ad0596728
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6837
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
The kept_alive() action is specific of a server that enjoyed an
unscheduled keep_alive and want to communicate it to the keep
alive logic to reschedule next keep_alive().
In server loop we are not expected to call kept_alive().
Remove it!
This call was erroneously added in commit 94e75e0c06.
Later, commit 7442b26d45 properly added the same call in
gdb_put_packet(), but incorrectly left the older in place.
Change-Id: If476410f870eebfbdaccdb1366ba2e9254e2fdf6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6836
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Replace 'mem2array' and 'array2mem' with a Tcl wrapper that
internally uses 'read_memory' and 'write_memory'.
The target-specific 'mem2array' and 'array2mem' functions
remain for now.
Change-Id: If24c22a76ac72d4c26916a95f7f17902b41b6d9e
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/6308
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
These functions are meant as replacement for 'mem2array' and
'array2mem'.
The main benefits of these new functions are:
* They do not use Tcl arrays but lists which makes it easier
to parse (generate) the data. See the Python Tcl RPC code
in contrib as a negative example.
* They do not operate on Tcl variables but instead return (accept)
the Tcl list directly. This makes the C and Tcl code base
smaller and cleaner.
* The code is slightly more performant when reading / writing
large amount of data. Tested with a simple Python Tcl RPC
benchmark.
Change-Id: Ibd6ece3360c0d002abaadc37f078b10a8bb606f8
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/6307
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
STM32H7Ax/7Bx devices have a different WPSN mask (0xFFFFFFFF),
(0xFF for STM32H74x/75x and STM32H72x/73x devices).
And when supporting STM32H7Ax/7Bx devices, stm32x_protect() was
not updated accordingly.
Change-Id: I081217af3e5ed815b67bfdfec7f4ebaa3152a865
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Fixes: 0b7eca1769 (flash/stm32h7x: add support of STM32H7Ax/H7Bx devices)
Reviewed-on: https://review.openocd.org/c/openocd/+/6858
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Multiple smaller items addressed in jtag_vpi:
- Several log prints adjusted to make them more clear to the user.
- Ensured that command handlers return ERROR_COMMAND_SYNTAX_ERROR
on incorrect number of arguments.
- Fix in "jtag_vpi set_address": Leave the previously set address
intact on error. Do not revert it to default.
- Minor update of help messages for the TCL commands.
- Updated macro names: SERVER_ADDRESS --> DEFAULT_SERVER_ADDRESS,
the same for SERVER_PORT
Change-Id: Ibe386403a179adab5edb69c77fa408aef55701bd
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6845
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The current implementation crashes when executing 'tpiu create'
without an object name due to an invalid memory access. Pass 'argv'
instead 'goi.argv' to fix the problem.
While at it, match the style of the error message to the style used for
other Tcl commands. Especially, make the 'name' parameter mandatory.
Change-Id: Ib2b233f8556934af61608ae93d6405585c2c40b7
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/6329
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
* flash/nor/atsame5: add LAN9255 devices
Support Microchip LAN9255 devices with embedded SAME53J MCU.
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Change-Id: Ia811c593bf7cf73e588d32873c68eb67c6fafad7
Reviewed-on: https://review.openocd.org/c/openocd/+/6811
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* tcl/board: Add EVB-LAN9255 config
Config for EVB-LAN9255, tested using Atmel-ICE debugger on J10
connector.
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Change-Id: I8bcf779e9363499a98aa0b7d10819c53da6a19e7
Reviewed-on: https://review.openocd.org/c/openocd/+/6812
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* aarch64: support for aarch32 ARM_MODE_UND
Fix:
unrecognized psr mode: 0x1b
cannot read system control register in this mode: (UNRECOGNIZED : 0x1b)
Change-Id: I4dc3e72f90d57e52c0fe63cb59a7529a398757b3
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Change-Id: Ifa5d21ae97492fde9e8c79ee7d99d8a2a871b1b5
Reviewed-on: https://review.openocd.org/c/openocd/+/6808
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* Combine register lists of smp targets.
This is helpful when you want to pretend to gdb that your heterogeneous
multicore system is homogeneous, because gdb cannot handle heterogeneous
systems. This won't always works, but works fine if e.g. one of the
cores has an FPU while the other does not. (Specifically, HiFive
Unleashed has 1 core with no FPU, plus 4 cores with an FPU.)
Signed-off-by: Tim Newsome <tim@sifive.com>
Change-Id: I05ff4c28646778fbc00327bc510be064bfe6c9f0
Reviewed-on: https://review.openocd.org/c/openocd/+/6362
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* semihosting: use open mode flags from GDB, not from sys/stat.h
Values defined in sys/stat.h are not guaranteed to match
the constants defined by the GDB remote protocol, which are defined in
https://sourceware.org/gdb/onlinedocs/gdb/Open-Flags.html#Open-Flags.
On my local system (Manjaro 21.2.1 x86_64), for example, O_TRUNC is
defined as 0x40, whereas GDB requires it to be 0x400,
causing all "w" file open modes to misbehave.
This patch has been tested with STM32F446.
Change-Id: Ifb2c740fd689e71d6f1a4bde1edaecd76fdca910
Signed-off-by: Pavel Kirienko <pavel.kirienko@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6804
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* semihosting: User defined operation, Tcl command exec on host
Enabling a portion (0x100 - 0x107) of the user defined semihosting
operation number range (0x100 - 0x1FF) to be processed with the help of
the existing target event mechanism, to implement a general-purpose Tcl
interface for the target available on the host, via semihosting
interface.
Example usage:
- The user configures a Tcl command as a callback for one of the newly
defined events (semihosting-user-cmd-0x10X) in the configuration
file.
- The target can make a semihosting call with <opnum>, passing optional
parameters for the call.
If there is no callback registered to the user defined operation number,
nothing happens.
Example usage: Configure RTT automatically with the exact, linked
control block location from target.
Signed-off-by: Zoltán Dudás <zedudi@gmail.com>
Change-Id: I10e1784b1fecd4e630d78df81cb44bf1aa2fc247
Reviewed-on: https://review.openocd.org/c/openocd/+/6748
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* target/smp: use a struct list_head to hold the smp targets
Instead of reinventing a simply linked list, reuse the list helper
for the list of targets in a smp cluster.
Using the existing helper, that implements a double linked list,
makes trivial going through the list in reverse order.
Change-Id: Ib36ad2955f15cd2a601b0b9e36ca6d948b12d00f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6783
Tested-by: jenkins
* helper/list: add list_for_each_entry_direction()
Use a bool flag to specify if the list should be forward or
backward iterated.
Change-Id: Ied19d049f46cdcb7f50137d459cc7c02014526bc
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6784
Tested-by: jenkins
* target/riscv: revive 'riscv resume_order'
This functionality was lost in [1], which was merged as commit
615709d140 ("Upstream a whole host of RISC-V changes.").
Now it works as expected again.
Add convenience macro foreach_smp_target_direction().
Link: [1] https://github.com/riscv/riscv-openocd/pull/567
Change-Id: I1545fa6b45b8a07e27c8ff9dcdcfa2fc4f950cd1
Signed-off-by: Tim Newsome <tim@sifive.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6785
Tested-by: jenkins
* doxygen: fix some function prototype description
Change-Id: I49311a643ea73143839d2f6bde976cfd76f8c67f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6830
Tested-by: jenkins
* Cadence virtual debug interface (vdebug) integration
Change-Id: I1bc105b3addc3f34161c2356c482ff3011e3f2cc
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6097
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* gdb_server: Include thread name as XML attribute
Explicitly providing a thread name in the "thread" element produces
better thread visualizations in downstream tools like IDEs.
Signed-off-by: Ben McMorran <bemcmorr@microsoft.com>
Change-Id: I102c14ddb8b87757fa474de8e3a3f6a1cfe10d98
Reviewed-on: https://review.openocd.org/c/openocd/+/6828
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* Fix small memory leak.
See https://github.com/riscv/riscv-openocd/pull/672
Change-Id: Ia11ab9bcf860f770ea64ad867102c74b898f6b66
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6831
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* server: remove remaining crust from dropped eCos code
Commit 39650e2273 ("ecosboard: delete bit-rotted eCos code") has
removed eCos code but has left some empty function that was used
during non-eCos build to replace eCos mutex.
Drop the functions and the file that contain them.
Change-Id: I31bc0237ea699c11bd70921660f960ee406ffa80
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6835
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
* rtos: threadx: Add hla_target support for ThreadX
Tested with an AZ3166 dev board (which uses the STM32F412ZGT6) running
the Azure RTOS ThreadX demonstration system.
Signed-off-by: Ben McMorran <bemcmorr@microsoft.com>
Change-Id: I44c8f7701d9f1aaa872274166321cd7d34fb1855
Reviewed-on: https://review.openocd.org/c/openocd/+/6829
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* .gitmodules: switch away from repo.or.cz
The host repo.or.cz is often offline, creating issues for cloning
and building OpenOCD from scratch.
Already 'jimtcl' developer has dropped repo.or.cz, triggering the
OpenOCD commit 861e75f54e ("jimtcl: switch to github").
Change also the link of the remaining submodules 'git2cl' and
'libjaylink' to their respective main repository.
Change-Id: Ib513237427635359ce36a480a8f2060e2fb12ba4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6834
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
* flash/nor/stm32f2x: Fix erase of bank 2 sectors
This commit corrects the erase function for stm32f2x when dealing with
sectors in bank 2, for STM32F42x/43x devices with 1MB flash.
On STM32F42x/43x with 1MB flash in dual bank configuration, the sector
numbering is not consecutive. The last sector in bank 1 is number 7, and
the first sector in bank 2 is number 12.
The sector indices used by openocd, however, _are_ consecutive (0 to 15
in this case). The arguments "first" and "last" to stm32x_erase() are of
this type, and so the logic surrounding sector numbers needed to be
corrected.
Since the two banks in dual bank mode have the same number of sectors, a
sector index in bank 2 is larger than or equal to half the total number
of sectors.
Change-Id: I15260f8a86d9002769a1ae1c40ebdf62142dae18
Signed-off-by: Simon Johansson <ampleyfly@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6810
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
* target/cortex_m: fix target_to_cm() helper
The third parameter of container_of() should point to the same member
as target->arch_info points to, struct arm.
It worked just because struct arm is the first member in
struct armv7m_common.
If you move arm member from the first place, OpenOCD fails heavily.
Change-Id: I0c0a5221490945563e17a0a34d99a603f1d6c2ff
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6749
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* target/armv7m,cortex_m: introduce checked arch_info cast routines
target_to_armv7m() and target_to_cm() do not match the magic number
so they are not suitable for use outside of target driver code.
Add checked versions of pointer getters. Match the magic number
to ensure the returned value points to struct of the correct type.
Change-Id: If90ef7e969ef04f0f2103e0da29dcbe8e1ac1c0d
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6750
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* target/cortex_m: add Cortex-M part number getter
The getter checks the magic numbers in arch_info to detect eventual
type mismatch.
Change-Id: I61134b05310a97ae9831517d0516c7b4240d35a5
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6751
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
* flash/nor/stm32xx: fix segfault accessing Cortex-M part number
Some of STM32 flash drivers read Cortex-M part number from
cortex_m->core_info.
In corner cases the core_info pointer was observed uninitialised
even if target_was_examined() returned true. See also [1]
Use the new and safe helper to get Cortex-M part number.
While on it switch also target_to_cm()/target_to_armv7m() to the safe
versions. This prevents a crash when the flash bank is misconfigured
with non-Cortex-M target.
Add missing checks for target_was_examined() to flash probes.
[1] 6545: fix crash in case cortex_m->core_info is not set
https://review.openocd.org/c/openocd/+/6545
Change-Id: If2471af74ebfe22f14442f48ae109b2e1bb5fa3b
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Fixes: f5898bd93f (flash/stm32fxx.c: do not read CPUID as this info is stored in cortex_m_common)
Reviewed-on: https://review.openocd.org/c/openocd/+/6752
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
* cpld: altera-epm240: Add additional IDCODEs
This adds some additional IDCODEs from the datasheet. It also adds
support for customizing the tap name.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Change-Id: I7cda10b92c229b61836c12cd9ca410de358ede2e
Reviewed-on: https://review.openocd.org/c/openocd/+/6846
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* cpld: altera-epm240: Increase adapter speed
According to the datasheet, the minimum clock period with Vccio1 = 1.5V
(the lowest voltage supported) is 143ns, or around 6MHz. Set the default
adapter speed to 5 MHz.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Change-Id: I21cad33fa7f1e25e81f43b5d2214d1fa4ec924de
Reviewed-on: https://review.openocd.org/c/openocd/+/6847
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* target: Add support for ls1088a
The LS1088A is an octo-core aarch64 processor from NXP in the layerscape
family. The JTAG is undocumented, but I was able to figure things out
from the output of `dap info`. This is the first in-tree example of
using the hwthread rtos (as far as I know), so hopefully it can serve as
an example to other developers. There are some ETMs, but I was unable to
try them out because I got 'invalid command name "etm"' when trying to
test things out.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Change-Id: I9b0791d27d8c41170a413a8d86431107a85feba2
Reviewed-on: https://review.openocd.org/c/openocd/+/6848
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* target: ls1088a: Add service processor
Normally the service processor is not necessary for debugging. However,
if you are using the hard-coded RCW or your boot source is otherwise
corrupt, then the general purpose processors will never be released from
hold-off. This will cause GDB to become confused if it tries to attach,
since they will appear to be running arm32 processors. To deal with
this, we can release the CPUs manually with the BRRL register. This
register cannot be written to from the axi target, so we need to do it
from the service processor target. This involves halting the service
processor, modifying the register, and then resuming it again. We try
and determine what state the service processor was in to avoid resuming
it if it was already halted.
The reset vector for the general purpose processors is determined by the
boot logation pointer registers in the device configuration unit.
Normally these are set using pre-boot initialization commands, but if
they are not set then they default to 0. This will cause the CPU to
almost immediately hit an illegal instruction. This is fine because we
will almost certainly want to attach to the processor and load a program
anyway.
I considered adding this as an event handler for either gdb-attach or
reset-init. However, this command shouldn't be necessary most of the
time, and so I don't think we should run it automatically.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Change-Id: I1b725292d8a11274d03af5313dc83678e10e944c
Reviewed-on: https://review.openocd.org/c/openocd/+/6850
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* board: Add NXP LS1088ARDB
This adds a board file for the NXP LS1088ARDB. This only covers the
"primary" JTAG header J55, and not the PCIe header (J91). The only
oddity is that the LS1088A and CPLD are muxed by adding/removing a
jumper from J48. Unfortunately, it doesn't look like OpenOCD supports
this CPLD beyond determining the irlen, so it's not very useful. Those
who are interested in experimenting can define CWTAP to access the CPLD,
but the default is to access the CPU.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Change-Id: Ia07436a534f86bd907aa5fe2a78a326a27855a24
Reviewed-on: https://review.openocd.org/c/openocd/+/6849
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* gdb_server: fix double free
Commit 6541233aa7 ("Combine register lists of smp targets.")
unconditionally assigns the output pointers of the function
smp_reg_list_noread(), even if the function fails and returns
error.
This causes a double free from the caller, that has assigned NULL
to the pointers to simplify the error handling.
Use local variables in smp_reg_list_noread() and assign the output
pointers only on success.
Change-Id: Ic0fd2f26520566cf322f0190780e15637c01cfae
Fixes: 6541233aa7 ("Combine register lists of smp targets.")
Reported-by: Michele Bisogno <michele.bisogno.ct@renesas.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6852
Tested-by: jenkins
Reviewed-by: Michele Bisogno <michele.bisogno.ct@renesas.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
* gdb_server: check target examined while combining reg list
Commit 6541233aa7 ("Combine register lists of smp targets.")
assumes that all the targets in the SMP cluster are already
examined and unconditionally call target_get_gdb_reg_list_noread()
that will in turn return error if the target is not examined yet.
Skip targets not examined yet.
Add an additional check in case the register list cannot be built,
e.g. because no target in the SMP cluster is examined. This should
never happen, but it's better to play safe.
Change-Id: I8609815c3d5144790fb05a870cb0c931540aef8a
Fixes: 6541233aa7 ("Combine register lists of smp targets.")
Reported-by: Michele Bisogno <michele.bisogno.ct@renesas.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6853
Tested-by: jenkins
Reviewed-by: Michele Bisogno <michele.bisogno.ct@renesas.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
* flash/stm32l4x: fix maybe-uninitialized compiler error
using gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0 we get:
error: ‘retval’ may be used uninitialized in this function
fixes: 13cd75b6ec (flash/nor/stm32xx: fix segfault accessing Cortex-M part number)
Change-Id: I897c40c5d2233f50a5385d251ebfa536023e5cf7
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6861
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* Fix build.
Change-Id: Ia60246246dd859d75659a43d1c59588dbb274d46
Signed-off-by: Tim Newsome <tim@sifive.com>
Co-authored-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Co-authored-by: Julien Massot <julien.massot@iot.bzh>
Co-authored-by: Pavel Kirienko <pavel.kirienko@gmail.com>
Co-authored-by: Zoltán Dudás <zedudi@gmail.com>
Co-authored-by: Antonio Borneo <borneo.antonio@gmail.com>
Co-authored-by: Jacek Wuwer <jacekmw8@gmail.com>
Co-authored-by: Ben McMorran <bemcmorr@microsoft.com>
Co-authored-by: Simon Johansson <ampleyfly@gmail.com>
Co-authored-by: Tomas Vanek <vanekt@fbl.cz>
Co-authored-by: Sean Anderson <sean.anderson@seco.com>
Co-authored-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
using gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0 we get:
error: ‘retval’ may be used uninitialized in this function
fixes: 13cd75b6ec (flash/nor/stm32xx: fix segfault accessing Cortex-M part number)
Change-Id: I897c40c5d2233f50a5385d251ebfa536023e5cf7
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6861
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Commit 6541233aa7 ("Combine register lists of smp targets.")
assumes that all the targets in the SMP cluster are already
examined and unconditionally call target_get_gdb_reg_list_noread()
that will in turn return error if the target is not examined yet.
Skip targets not examined yet.
Add an additional check in case the register list cannot be built,
e.g. because no target in the SMP cluster is examined. This should
never happen, but it's better to play safe.
Change-Id: I8609815c3d5144790fb05a870cb0c931540aef8a
Fixes: 6541233aa7 ("Combine register lists of smp targets.")
Reported-by: Michele Bisogno <michele.bisogno.ct@renesas.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6853
Tested-by: jenkins
Reviewed-by: Michele Bisogno <michele.bisogno.ct@renesas.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
Commit 6541233aa7 ("Combine register lists of smp targets.")
unconditionally assigns the output pointers of the function
smp_reg_list_noread(), even if the function fails and returns
error.
This causes a double free from the caller, that has assigned NULL
to the pointers to simplify the error handling.
Use local variables in smp_reg_list_noread() and assign the output
pointers only on success.
Change-Id: Ic0fd2f26520566cf322f0190780e15637c01cfae
Fixes: 6541233aa7 ("Combine register lists of smp targets.")
Reported-by: Michele Bisogno <michele.bisogno.ct@renesas.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6852
Tested-by: jenkins
Reviewed-by: Michele Bisogno <michele.bisogno.ct@renesas.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
Some of STM32 flash drivers read Cortex-M part number from
cortex_m->core_info.
In corner cases the core_info pointer was observed uninitialised
even if target_was_examined() returned true. See also [1]
Use the new and safe helper to get Cortex-M part number.
While on it switch also target_to_cm()/target_to_armv7m() to the safe
versions. This prevents a crash when the flash bank is misconfigured
with non-Cortex-M target.
Add missing checks for target_was_examined() to flash probes.
[1] 6545: fix crash in case cortex_m->core_info is not set
https://review.openocd.org/c/openocd/+/6545
Change-Id: If2471af74ebfe22f14442f48ae109b2e1bb5fa3b
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Fixes: f5898bd93f (flash/stm32fxx.c: do not read CPUID as this info is stored in cortex_m_common)
Reviewed-on: https://review.openocd.org/c/openocd/+/6752
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
mrv96
Tim Newsome
Evgeniy Naydanov
Evgeniy Naydanov
Jan Matyas
Huaqi Fang
wzgpeter
Antonio Borneo
jihongbin
fatalc
Marc Schink
Steve Marple
Tomas Vanek
Julien Massot
Jan Matyas
Dolu1990
Gabor Csapo
Tarek BOCHKATI
Erhan Kurubas