https://review.openocd.org/c/openocd/+/8439 changed variable `words`
from uint8_t to unsigned int in sfdp.c but failed to update the
LOG_DEBUG line to reflect the new type. On macOS this caused:
src/flash/nor/sfdp.c:107:28: error: format specifies type 'unsigned
char' but the argument has type 'unsigned int' [-Werror,-Wformat]
The formatting of the debug line has been updated to reflect the updated
type.
Change-Id: Ifc7ddb1279ab2603901c969d9c09af847f3a3caf
Signed-off-by: Pete Moore <pmoore@mozilla.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8660
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* Registers were not invalidated if the hart became unavailable.
* Improved logging in the case register invalidation involves loss of
information.
Change-Id: Icfb5e190dd6dcb1a97e4d314d802466cab7a01e4
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This changes will allow to unite read_memory/write_memory fucntions
to one access function
(1) Replaced read/write functions arguments with one structure
(2) Unified read_memory/write_memory function pointers
to be stored in same structure
Signed-off-by: Farid Khaydari <f.khaydari@syntacore.com>
this commit fixes a regression introduced in
ba8c1eef5a.
The regression was caused by removal of these lines:
```
- /* Register prefix: "csr_" or "custom_" */
- strcpy(name, reg_type);
- name[strlen(reg_type)] = '_';
```
causing all CSR names with custom names to be parsed as empty strings.
Add maskisr command support to Xtensa NX targets allowing masking
of interrupts during single stepping.
Change-Id: I3835479de8015f1a2842afd1aeab24829e385031
Signed-off-by: Henrik Mau <henrik.mau@analog.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8575
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Use LOG_TARGET_xxx() for the remaining log messages.
Change-Id: If52e3935b57e4c39212ce6b5111ff65159de1373
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8580
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use LOG_TARGET_xxx() for the remaining log messages.
Change-Id: I4b86b206d17dead0662388e827204b40a7d29edd
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8579
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Remove the prefix since it is redundant. While at it, also
get rid of the useless exclamation mark.
Change-Id: I8707342c602cea735c5a423b37ebe40a3aafb137
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8578
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Remove the prefix since it is redundant.
Change-Id: I9c23c0479ba40be24e471309e720060cd03763ee
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8577
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Also convert the Bus Pirate to the common PROCESS_ADAPTERS logic.
Change-Id: Ifa8ebcee380c16d7e308ba7a75dbffdb74208285
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8533
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: R. Diez <rdiez-2006@rd10.de>
Tested-by: jenkins
The stlink driver, both in dapdirect and in HLA modes, pretends to
store locally the value of the adapter speed in order to use it
later-on during adapter initialization.
It doesn't work in dapdirect mode since the code to store locally
the value will not be executed until the adapter is already fully
initialized.
This cause an issue in dapdirect mode:
- due to the local value, still kept at -1, the adapter will be
initialized to the lowest clock speed (5 KHz on stlink v2 in SWD
mode);
- after the adapter initialization the framework will again set
the speed with the value requested by the user.
Some target, like nRF51822, only accepts JTAG/SWD speed in a
defined range of frequencies. The initial speed of 5 KHz used by
dapdirect can be out of range, making the target debug port not
working.
The adapter framework already stores the value of speed and makes
it available through adapter_get_speed_khz().
Drop struct hl_interface_param::initial_interface_speed.
Let the code to use adapter_get_speed_khz().
Change-Id: Ie11bf0234574f2a9180d3d3a16efb78e08dfcd86
Reported-by: Andrzej Sierżęga <asier70@gmail.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8574
Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
Tested-by: jenkins
Change the variable name to 'is_configure' to be compatible with the
coding style and use 'bool' as data type.
Change-Id: I8609f9807c8bd14eaf6c93acf63fd51b55c9bbbb
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8573
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The functions:
- semihosting_opcode_to_str();
- semihosting_write_fields();
- semihosting_set_field();
are not referenced outside the file.
Make them static.
Change-Id: Ia8d35554673145fdfe0e501543eb18919863039f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8551
Tested-by: jenkins
The function esirisc_jtag_get_eid() is not used outside the file.
Make it static.
The function esirisc_jtag_disable_debug() is never used.
Make it static and mark it as unused.
Change-Id: I5c99cbf77cc9c527b6e18a3f67caa24f8551d09c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8550
Tested-by: jenkins
The function is not used.
Drop it!
Change-Id: I1625e03714b5a842f668098191c39cce34f815e8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8549
Tested-by: jenkins
The function is not referenced outside the file.
Make it static.
Change-Id: Ic2552c040b6b46c0334851a4fc0fdaa400e11e4c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8548
Tested-by: jenkins
The function is not referenced outside the file.
Make it static.
Change-Id: Ifeccc5e38f3da4b4111422860bc1c1447d00f7fe
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8547
Tested-by: jenkins
The function is not referenced outside the file.
Make it static.
Change-Id: I5f2a2c70085b9158df8806432bb9ed09bb256ab5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8546
Tested-by: jenkins
The function is not used.
Drop it!
Change-Id: I176c9d6ba077e36b762c14f9b877d5152992763c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8545
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
The functions:
- mpsse_divide_by_5_config();
- mpsse_purge();
- mpsse_rtck_config();
- mpsse_set_divisor();
are not referenced outside the file.
Make them static.
Change-Id: Id6930183a3ce26693b2113f622046168ba289df8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8544
Tested-by: jenkins
The functions:
- interface_jtag_add_callback();
- interface_jtag_add_callback4();
are not referenced outside the file.
Make them static.
Change-Id: I84f738309d23c8d0b5329aa04436db750cf185e5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8543
Tested-by: jenkins
The functions:
- jtag_error_clear();
- jtag_tap_count();
are not referenced outside the file.
Make them static.
Change-Id: I00fcf06b1838b9f6c955c19772f1d41d486459e9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8542
Tested-by: jenkins
The function is not referenced outside the file.
Make it static.
Change-Id: I72e96624749ae4cc7f4566d737a88186e899616a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8541
Tested-by: jenkins
Add support for code coverage collection. This helps
developers to check if their test scenarios really exercised
all the OpenOCD functionality that they intended to test.
- Option --enable-gcov has been added to configure.ac
which enables the coverage collection using Gcov. (Disabled
by default.)
- The steps to collect and inspect the coverage have been
described in HACKING file.
Change-Id: I259e401937a255e7ad7f155359a0b7787e4d0752
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8521
Tested-by: jenkins
Reviewed-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Conflicts are related to `unsigned`->`unisgned int` cleanup:
* `src/jtag/drivers/ftdi.c` -- between
6749c70a3a and
a64dc23bf1.
* `src/rtos/hwthread.c` -- between
ef3e61bebc and
436e6f1770.
* `src/target/target.c` and `.h` -- between
53ec10b61d and
e72733d590.
* `src/target/riscv/*` -- due to
957eb741a0 and
fec3b22421.
Resolved by:
* Changing the return type of `riscv_batch_get_dmi_read_op()` to
`uint32_t`.
* Using RISC-V OpenOCD's version in other cases.
Change-Id: Ia6e2129c6fddb1dec26adcd936506af2539412ef
There was a conflict:
1. commit 2cd8ebf44d ("breakpoints: use 64-bit type for watchpoint mask
and value")
2. commit 0bf3373e80 ("target/breakpoints: Use 'unsigned int' for
length")
The second commit was created erlier, but merged later so the types of
`mask` and `value` became `uint32_t` in `watchpoint_add_internal()`.
This created a bug:
`WATCHPOINT_IGNORE_DATA_VALUE_MASK` is defined as `(~(uint64_t)0)`.
Truncation to uint32_t makes it so the comparisons with the constant
don't work.
Change-Id: I19c414c351f52aff72a60330d83c29db7bbca375
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8500
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Karl Palsson <karlp@tweak.au>
Two cases where single step is needed before resume:
1. ebreak used in software breakpoint;
2. a trigger that is taken just before the instruction
that triggered it is retired.
Signed-off-by: Songhe Zhu <zhusonghe@eswincomputing.com> Co-developed-by: Fei Gao <gaofei@eswincomputing.com> Co-developed-by: xiatianyi <xiatianyi@eswincomputing.com>
`target`'s `state` and `debug_reason` should not be updated in
`deassert_reset` if sending reset acknowledgment fails.
Change-Id: I86136fe829e7a7c6b69f718f0cf32322e40341b0
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Per current OpenOCD conventions, LOG_ERROR should not be printed
when ERROR_COMMAND_SYNTAX_ERROR is returned. OpenOCD will print
the command syntax to the user on its own.
Apply some coding style changes according to the C style guide. The
patch is tested for regression with the 'wiggler' parallel port cable.
Change-Id: I43774f596831d8c46f90f18893418178041a930b
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8516
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Change-Id: Ib0cbd9388d61659f8d47c8f57c09baa6df123487
Signed-off-by: Mark Zhuang <mark.zhuang@spacemit.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8369
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
In multi-target SoC not all the targets are running simultaneously
and some target could be powered off or kept under reset.
Commit 4892e32294 ("target/cortex_m: allow poll quickly get out
of TARGET_RESET state") does not considers the case of a target
that is kept in reset and expects the target to change state from
TARGET_RESET immediately.
This causes OpenOCD to log continuously:
Info : [stm32mp15x.cm4] external reset detected
Info : [stm32mp15x.cm4] external reset detected
Info : [stm32mp15x.cm4] external reset detected
Read again dhcsr to detect the 'stable' reset status and quit,
waiting for next poll to re-check the target's status.
Change-Id: Ic66029b988404a1599bb99bc66d4a8845b8b02c6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 4892e32294 ("target/cortex_m: allow poll quickly get out of TARGET_RESET state")
Reviewed-on: https://review.openocd.org/c/openocd/+/8399
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
There is no need to change if `dcsr.ebreak*` fields after a reset if a
user requested a configuration that will result `dcsr.ebreak*` field
values equal to reset values.
Change-Id: I2844d30aef8f735c7b37394ee422e9b3f04a2e3b
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Existing flags: 'enable_virtual' and 'enable_virt2phys' were
replaced with explicit translation drivers. Motivation:
(1) Having 'enable_virtual' and 'enable_virt2phys' flags set simultaneously
may cause double address translation which is unacceptable
(2) Flags were global for all targets which is wrong too
Signed-off-by: Farid Khaydari <f.khaydari@syntacore.com>
On several packet-handling functions, add "const" to arguments
that represent read-only packet buffers.
For instance on GCC 13.2.0, this code:
const char *some_packet = "...";
gdb_put_packet(conn, some_packet, strlen(some_packet));
would prior to the fix produce warning:
passing argument 2 of ‘gdb_put_packet’ discards ‘const’
qualifier from pointer target type [-Wdiscarded-qualifiers]
Change-Id: Idb62f57d37ed323c39de38982e57afdd3882e280
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8517
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Change the prototype of riscv_batch_get_dmi_read_op().
Now that 'target->smp' is unsigned, drop the cast.
Change-Id: I2a54268ed1e4bf0ea884b62cceb73f5c7451da78
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8484
Tested-by: jenkins
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Fix only minor additional checkpatch issue (spacing and line
length).
Change-Id: I11f10eddadc21e051c96eb3d4d4c0554a2cddd15
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8483
Tested-by: jenkins
If some other TAP is not in BYPASS, an IR scan is needed to select
BYPASS on that TAP.
Change-Id: Iae425a415109b1a853db3718762661877eea56e8
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Zero is not a power of two.
All functions that use IS_PWR_OF_2 were checked and the edge case
of IS_PWR_OF_2(0) does not occur anywhere at the moment. Therefore
the fix is safe.
Change-Id: I84d9f9c64c9a7df452ca6e99c2ee4169ccb2b0be
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Fixes: 9544cd653d ("helper: add align.h")
Reviewed-on: https://review.openocd.org/c/openocd/+/8511
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
In jimtcl 0.82, the include file jim.h included in turn stdio.h
This made redundant to include the former in openocd source files.
Since jimtcl 0.83, jim.h drops the include of stdio.h, causing
openocd build to fail.
Include stdio.h in the files that need it.
Change-Id: Ic81c9b273d7520f4d2d8c32bc3e0a6bcfffb67ed
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8512
Reviewed-by: Jonathan McDowell <noodles-openocd@earth.li>
Tested-by: jenkins
The macros trigger few errors with checkpatch:
ERROR:MACRO_ARG_REUSE: Macro argument reuse 'g' - possible
side-effects?
ERROR:TRAILING_STATEMENTS: trailing statements should be
on next line
ERROR:SPACING: spaces preferred around (several cases)
ERROR:SINGLE_STATEMENT_DO_WHILE_MACRO: Single statement
macros should not use a do {} while (0) loop
plus an empty line triggers
ERROR:BRACES: Blank lines aren't necessary before a close
brace '}'
Fix them!
Change-Id: I0690b68b511ed7f45a7e0909a0addd2822ba9fe8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8499
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The function dpm->finish() returns a value that is almost always
ignored.
Drop the commented-out cast
/* (void) */
Change-Id: I7ff210a2693dd1877b7c7591705cdcd96a2c6125
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8498
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Fix checkpatch errors:
ERROR:BOOL_COMPARISON: Using comparison to true/false is
error prone
While there,
- drop useless parenthesis,
- drop unnecessary else after a return.
Change-Id: I1234737b3e65bd10df5e938d1c36f9abaf02d348
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8496
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
Fix checkpatch error:
ERROR:COMPARISON_TO_NULL: Comparison to NULL could be
written "cmd_ctx"
Change-Id: I3615fc427f8b160d44b6edbf7a066a086cab99bb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8495
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Fix checkpatch error:
ERROR:COMPARISON_TO_NULL: Comparison to NULL could be
written "handle"
Change-Id: I0ac12ccfc5fce4dd41266f83eb4b973a4e6a314d
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8494
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
Checkpatch triggers the error
ERROR:RETURN_VOID: void function return statements are not
generally useful
Fix it!
Change-Id: I72d9fb8242d6a91c0aa481d5d023f0359c76a5ec
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8492
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Checkpatch triggers the error
ERROR:OPEN_BRACE: open brace '{' following function
definitions go on the next line
Fix it!
Change-Id: I0ce4585a6507eca094b82cdabdecf6fdbe7923b1
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8491
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Fix only minor additional checkpatch issue (spacing and line
length).
Change-Id: I4f936ffc4cedb153afa331cd293b08f4c913dc93
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8482
Tested-by: jenkins
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Fix only minor additional checkpatch issue (spacing and line
length).
Change-Id: I2c1ef03bbc828112cc5bea89463cff9fc0c1e94f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8481
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Fix only minor additional checkpatch issue (spacing and line
length).
Use Checkpatch-ignore below for the function pointers in the file
'armv7a_cache_l2x.h' that do not assign the identifier names to
the function arguments.
Most of these struct are unused and should be fixed or dropped.
Checkpatch-ignore: FUNCTION_ARGUMENTS
Change-Id: I8f27e68eb3502e431c1ba801b362358105f9f2dc
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8480
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Fix only minor additional checkpatch issue (spacing and line
length).
Change-Id: Id808747855a02052f3738e2d232bff4dd99b27f1
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8479
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Change the type to 'struct target::smp' and to the initialization
variable 'smp_group'.
Change-Id: I5f5a30a796aaf4e0014a38e81abdf4fb4afbdf48
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8478
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
Detected while converting 'unsigned' to 'unsigned int'.
Use the correct conversion string for stdint values.
Change-Id: I99f3dff4c64dfd7acf2bddb130b56e9ebe1e6c60
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8477
Tested-by: jenkins
Change order of dsp register name array and removed hi0 and lo0
to comply with gdb definition of dsp in mips-dsp.xml, the regs
name array is now mapping corresponding dsp accumulator names
onto `mips32_regs` and `core_regs` instead of mapping to instr
arrays in dsp functions.
feature now requires a place to store cached dsp registers.
Add dsp registers to reg_list for gdb to access them.
Add dsp module enable detection to avoid DSP Disabled exception
while reading dsp accumulators.
Add dsp register reading procedure in `mips32_pracc_read_regs`
and writing procedure in `mips32_pracc_write_regs`.
Change-Id: Iacc335da030ab85989922c81aac7925b3dc17459
Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8476
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
The field 'struct chibios_chdebug::ch_version' is 16 bits wide, so
using le_to_h_u32() and be_to_h_u32() overflows in the following
fields of the struct.
Restrict the endianness conversion to 16 bits and use the target
endianness dependent target_buffer_get_u16().
Convert the 'struct chibios_chdebug::ch_version' to an array of
uint8_t.
Change-Id: Iaa80e9cb1a65c27512919398b8ffbf14e5c240cd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8473
Tested-by: jenkins
See https://github.com/riscv-collab/riscv-openocd/issues/1139
riscv013_invalidate_cached_progbuf() was failing to zeroize the final
buffer array element. Use memset() instead of a manual loop to zeroize
it in order to address this and simplify the code.
These devices are essentially the same as the E54 series with the
exception of immutable boot (SG41, SG61) and HSM (SG60, SG61), and some
bug fixes found only in E54 revision F. When the security features are
not enabled, they behave identically except for the different DIDs.
Signed-off-by: Matt Trescott <mtc@melexis.com>
Change-Id: Ic93313f3e20af0ed4a5768880d17b335a7b7bb04
Reviewed-on: https://review.openocd.org/c/openocd/+/8355
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
(1) Error code and 'skip_reason' string were replaced with memory access
status. It allows to specify whether OpenOCD should exit the access
early.
(2) Slightly refactored 'read_memory' and 'write_memory' functions.
Checkpatch-ignore: MACRO_ARG_PRECEDENCE, MULTISTATEMENT_MACRO_USE_DO_WHILE
Checkpatch-ignore: TRAILING_SEMICOLON
Signed-off-by: Farid Khaydari <f.khaydari@syntacore.com>
Pete Moore
Evgeniy Naydanov
Evgeniy Naydanov
Farid Khaydari
Anatoly Parshintsev
Parshintsev Anatoly
Henrik Mau
Marc Schink
R. Diez
Antonio Borneo
Jan Matyas
zhusonghe
Mark Zhuang
Florian Fainelli
Walter Ji
Tommy Murphy
Matt Trescott