6200d9a180
Merge branch 'riscv_timeout_commands' into riscv-compliance
2017-08-15 17:22:08 -07:00
94de39c221
riscv: Put commandd_handlers before they are needed. Tabs vs spaces.
2017-08-15 17:04:59 -07:00
879c274cb9
riscv: Add commands for setting timeouts
2017-08-15 15:59:40 -07:00
3ec1772c96
riscv: Add commands for setting timeouts
2017-08-15 15:55:09 -07:00
25eedb94a5
Merge remote-tracking branch 'origin/riscv' into riscv-compliance
2017-08-14 12:08:58 -07:00
45f28081e1
Merge pull request #94 from riscv/memread
...
Fix a corner case in block memory read.
2017-08-13 14:44:15 -07:00
2706df0ec3
Fix a corner case in block memory read.
2017-08-13 14:14:23 -07:00
1af0c09a85
Merge pull request #92 from riscv/FE_402_fix
...
Fe 402 fix
2017-08-13 11:03:12 -07:00
3109da7dfd
Force actual read from prog buffer for the last transaction in read_memory()
2017-08-12 14:51:12 -07:00
e676d3dae6
Fixed off-by-one error in previous commit
2017-08-11 17:46:35 -07:00
96eb73c83e
Merge pull request #90 from riscv/FE_402_fix
...
Fix reads beyond requested memory range
2017-08-10 18:13:13 -07:00
39b01259fa
fixed memory leak introduced by previous commit
2017-08-10 16:37:50 -07:00
b5692585de
Fix reads beyond requested memory range
2017-08-10 14:27:11 -07:00
b132fac804
Merge pull request #88 from riscv/read0
...
Fix assertion failure when reading from address 0.
2017-08-09 16:26:19 -07:00
efcfcf555f
Fix assertion failure when reading from address 0.
2017-08-09 12:42:17 -07:00
97ea54030c
Merge pull request #87 from riscv/gdb_next_port
...
When gdb_port is 0, don't increment it.
2017-08-08 10:01:26 -07:00
b897807224
When gdb_port is 0, don't increment it.
...
Usually incrementing to get the next port is a good idea, but when set
to 0 the idea is to find an arbitrary unallocated port. 1 is almost
certainly not helpful.
2017-08-07 13:55:37 -07:00
b9822ab1b8
Merge pull request #86 from riscv/debug
...
Display register numbers in a more usable format.
2017-07-27 14:49:29 -07:00
46b5f913c7
Display register numbers in a more usable format.
2017-07-27 13:45:26 -07:00
73dee3ad4a
Merge pull request #85 from riscv/print_port
...
Print out which port OpenOCD is listening on.
2017-07-26 07:51:37 -07:00
753d15e22c
Print out which port OpenOCD is listening on.
...
This is essential when a test environment asks OpenOCD to listen on port
0, so that the environment can easily discover which port is actually
being used.
2017-07-25 14:08:10 -07:00
79329f21a3
Merge pull request #84 from riscv/reset
...
Fix infinite loop in reset.
2017-07-16 12:47:41 -07:00
b032eb1bcc
Use a wall clock timeout to complete reset.
2017-07-16 11:48:12 -07:00
f0f1df1061
Fix infinite loop in reset.
2017-07-14 12:50:11 -07:00
43c6fd3b8f
Merge pull request #83 from riscv/triggers
...
Share trigger code between 0.11 and 0.13 code.
2017-07-13 18:04:34 -07:00
c8015e8dc1
riscv compliance: More post-test cleanup
2017-07-13 08:00:22 -07:00
d60dbd60e8
Share trigger code between 0.11 and 0.13 code.
...
The actual implementation of triggers didn't change between those two
versions, so there's no need to duplicate the code.
In the process, I also fixed a minor multicore bug where tselect didn't
always get written on all harts.
2017-07-12 19:54:40 -07:00
cc2c2e7a65
Merge pull request #82 from riscv/comment
...
Forgot to commit this follow up to PR #79
2017-07-12 19:45:40 -07:00
20d46b8bf0
Merge remote-tracking branch 'origin/riscv' into riscv-compliance
2017-07-12 18:46:26 -07:00
66fa38add7
riscv-compliance: Halt harts again at the end of the test.
2017-07-12 18:44:41 -07:00
2deb02695e
Forgot to commit this follow up to PR #79
2017-07-12 17:51:38 -07:00
46b91c9b0d
Merge pull request #79 from riscv/abstract_regs
...
Use abstract command to access registers if possible
2017-07-12 17:50:46 -07:00
09bf86e31a
Keep around cmderr for callers to inspect.
...
Use this to only change abstract register access behavior when cmderr
explicitly says the requested operation is unsupported.
2017-07-12 14:36:09 -07:00
856f70fe44
Try abstract register writes as well.
2017-07-12 14:13:31 -07:00
f37e93bbc0
Try using abstract commands to read registers
...
This is the only way the spec guarantees that GPRs are accessible, and
depending on the implementation this might be the only way that CSRs are
accessible.
Also changed the debug code that parses out DMI fields to be simpler to
maintain (albeit a little slower).
riscv013_execute_debug_buffer() now automatically clears cmderr if the
command fails. That feels like the right behavior. (It does return the
error to its caller.)
2017-07-12 14:13:31 -07:00
da74f511b9
Merge pull request #80 from riscv/triggers
...
Disable debugger-set triggers on connect
2017-07-11 12:13:56 -07:00
a0c1dd643a
Merge pull request #81 from riscv/llp64
...
Use LL for 64-bit defines, as Windows is LLP64
2017-07-10 16:00:39 -07:00
10a61000b5
Use LL for 64-bit defines, as Windows is LLP64
...
This should also fix bugs on ILP32 systems.
2017-07-10 13:45:42 -07:00
4072fa493b
Disable debugger-set triggers on connect
...
When first connecting to a target, have the debugger disable any
hardware triggers that are set by a previously connected debugger.
The 0.11 code already did this, but 0.13 did not.
To achieve this I decided to share the code to enumerate triggers
between 0.11 and 0.13, which required me to implement get_register() and
set_register() for 0.11, which made the whole change a lot larger than
you might have guessed.
Hopefully this sets us up to in the future share the code to set/remove
triggers as well.
2017-07-10 10:26:24 -07:00
29b62710f7
Merge pull request #78 from riscv/build32
...
Add 32-bit build
2017-07-06 15:03:12 -07:00
21e06e1d89
Fix 32-bit build.
...
Code taken from http://openocd.zylin.com/#/c/4178/
2017-07-06 14:53:28 -07:00
708b05ba07
Build 32- and 64-bit binaries with Travis.
2017-07-06 14:53:14 -07:00
31e5b53a46
Merge pull request #74 from riscv/build32
...
Fix 32-bit build errors.
2017-07-06 13:41:47 -07:00
9f1738ae49
Merge pull request #77 from riscv/travis
...
Perform regular build with travis.
2017-07-06 10:54:34 -07:00
6842fd2c10
riscv: Add more TODO compliance comments
2017-07-05 17:59:30 -07:00
bdc38561c0
riscv: Clean up reset/dmactive/step compliance test
2017-07-05 17:54:55 -07:00
2b94888100
riscv: Add single-step, reset, and dmactive to the compliance test.
2017-07-05 15:11:40 -07:00
87abbe4a51
Merge remote-tracking branch 'origin/riscv' into riscv-compliance
2017-07-05 11:02:30 -07:00
3be99ac884
Perform regular build with travis.
2017-07-05 10:33:42 -07:00
321619946b
Merge pull request #73 from riscv/old_triggers
...
Add back support for type 1 triggers
2017-07-03 13:52:16 -07:00
Megan Wachs
Gleb Gagarin
Tim Newsome
Gleb Gagarin
Palmer Dabbelt