After 'reset run' or 'reset halt' the loaded application
is expected to manipulate RAMON register to workaround
the known silicon errata.
Moreover, writing to RAMON register from 'reset-end' event
after 'reset run' may collide with application intentions.
Use the workaround in 'reset-init' event only to ensure
correct function of target algorithms.
Change-Id: I7d2d92e6805a05a83676edb46b3163ef39b9a7e4
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8104
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use the newer driver name 'nrf5' instead.
While on it set the unused parameters of flash bank
creation to zero.
While on it remove 2 empty comments.
Change-Id: I9cf0eadc5b696e6c8b7e6aec0ea3345967523e87
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8103
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
While on it update table comment and drop
not working URLs.
Change-Id: I9e21c72aa75a908c644460e43c148d3240c49b2d
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8102
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
On 2008-03-05, before git's age, commit 6d95014674 adds sending
an ACK ('+' char) at GDB connection, before receiving any GDB
remote command that requires to be ACK'ed.
Neither the text added in the commit message ("added ACK upon
connection (send +)") nor in the associated comment ("send ACK to
GDB for debug request") provide an exhaustive explanation for
sending this unsolicited ACK.
This code has never been touched since its introduction.
Analysis of GDB code doesn't show it's required, including old GDB
code.
Running gdbserver (from GDB package) and attaching it with "nc"
shows that gdbserver does not send any ACK to a new connection.
Same for lldb-server.
Drop it!
Change-Id: Id68c352ce44dd85a1ea3d67446e17e2a241ef058
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/6768
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Anatoly P <anatoly.parshintsev@syntacore.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
For the sake of https://review.openocd.org/c/openocd/+/7957
Instead of "coreid", 'target smp' command call order used as
an index
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Iab86b81868d37c0bf8663707ee11367c41f6b96d
Reviewed-on: https://review.openocd.org/c/openocd/+/8162
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
When performing a command queue allocation larger than the default page
size of 1MiB any subsequent allocations will run into an integer under-
flow when checking for the remaining memory left in the current page.
Causing the function returning a pointer past the end of the buffer and
thus creating a buffer overflow.
This has been observed to cause some transfers to Efinix FPGAs to fail,
because another buffer can get corrupted in the process, causing its
respective free() to fail.
Change-Id: Ic5a0e1774e2dbd58f1a05127f14816c8251a7d9c
Signed-off-by: SydMontague <sydmontague@phoenix-staffel.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8126
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
find members of a union, nested in struct.
Allows file to be compiled with GCC 4.0
Signed-off-by: Sevan Janiyan <venture37@geeklan.co.uk>
Change-Id: Ied68668d3b5f811573a20e11e83aceff268963eb
Reviewed-on: https://review.openocd.org/c/openocd/+/8120
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
At least one TAP shouldn't be in BYPASS mode
Change-Id: Ic882acbfc9b6a9f4b0c3bb4741a49f3981503c8c
Signed-off-by: Kirill Radkin <kirill.radkin@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7741
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Fix flash operation error when addr-width > 32bit
on any 32-bit OS and some 64-bit OS (windows).
Change-Id: I199f1cc5128c45bd0bb155e37acb2fb6325dff88
Signed-off-by: wangyanwen <wangyanwen@nucleisys.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8095
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Allows build with legacy toolchains which do not support
C23 nor GCC extension for binary literals.
Change-Id: I742d3a8a86bf16f81421d11c59d3cb155ee17aed
Signed-off-by: Sevan Janiyan <venture37@geeklan.co.uk>
Reviewed-on: https://review.openocd.org/c/openocd/+/8123
Tested-by: jenkins
Reviewed-by: Jörg Wunsch <openocd@uriah.heep.sax.de>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The original documents from Jedec since JEP106BG, do not report
the entry for "21 NXP (Philips)", replaced by "c".
It's clearly a typo.
Keep the line from JEP106BF.01 for "NXP (Philips)".
Change-Id: I293173c4527c2eabebdc33a94cd23d3a557a4618
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8132
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The OpenJTAG driver behaviour always forces a system reset on jtag_init.
The driver was incorrectly assuming that when execute_reset is called
with trst set to 1 - perform a software TAP reset, otherwise perform a
system reset when trst is 0.
The set_state call assumes the that OpenJTAG hardware will perform a
software TLR reset if the target state is TAP_RESET. This is not the
case: the published VHDL will simply find the shortest path to TLR and
not perform a fixed 5 cycle operation with TMS held high.
Fix the code to only perform system resets when srst is 1 in
execute_reset and to force a software TAP reset operation in set_state
when the target state is TAP_RESET.
Change-Id: I7e0f76f8491efefff1ccaeb4b1ae16e722d76df4
Signed-off-by: N S <nlshipp@yahoo.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8121
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Calculate exact size of response expected from OpenJTAG device so that
openjtag_buf_read_standard doesn't spend 5 retry cycles waiting for
data that isn't coming.
Change-Id: Icd010d1fa4453d6592a1f9aed93fb1f01e0a19da
Signed-off-by: N S <nlshipp@yahoo.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8101
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Commit ea2e26f7d5 ("jtag: rewrite jim_jtag_configure() as
COMMAND_HANDLER") breaks the option -event if it is the last of
the command line.
This can be tested, even without any device connected, through:
#> openocd -f board/ti_cc26x0_launchpad.cfg
wrong # args: should be "-event <event-name> <event-body>"
Fix the check on available arguments after -event.
Change-Id: Iec1522238f906d61a888a09a7685acd9ac6442a7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Lorenz Brun <lorenz@brun.one>
Fixes: ea2e26f7d5 ("jtag: rewrite jim_jtag_configure() as COMMAND_HANDLER")
Reviewed-on: https://review.openocd.org/c/openocd/+/8125
Tested-by: jenkins
Reviewed-by: Lorenz Brun <lorenz@brun.one>
Prior to the change when calling `log_output` without any arguments it
was unclear where the log was redirected.
Change-Id: Iaa3ecea8166f9c7ec8aad7adf5bd412799f719a1
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8071
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
LIBUSB_ERROR_INTERRUPTED can happen when (among other things) OpenOCD
process receives a signal like SIGHUP or SIGINT during a call to libusb.
Such situations are expected and should not be treated as an error - the
affected request should just be restarted.
Without this patch applied if a signal arrives during FTDI initialization
procedure we can easily end up (if JTAG speed is low) in situations like
https://review.openocd.org/c/openocd/+/4767. This happens because
fpsse_flush fails due to LIBUSB_ERROR_INTERRUPTED .
It should be noted that the current usage of mpsse_flush should be
revised since it seems that we don't always process error codes returned
by the function.
Change-Id: Ifa063ce828068f8d0371e1c2a864bb6174649848
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7769
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Enable support for USB vid and pid combinations other than 0x0403/0x6001
on OpenJTAG adapters.
Change-Id: Ibb5fb14a6f33abbc011dbf3179df20d79ed74a7a
Signed-off-by: N S <nlshipp@yahoo.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8100
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Fix obsoleted references to Cortex-M3 from the time
when M3 was the only supported Cortex.
Fix typo.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I6f93265f1b9328fec063fecd819210deb28aaf2c
Reviewed-on: https://review.openocd.org/c/openocd/+/8099
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
In 2008 the commit 1829361253 ("define resetting
the target into the halted or running state as an atomic operation.")
introduced the target_halt() call to the end of cortex_m3_assert_reset(),
Checkpatch-ignore: GIT_COMMIT_ID
A year later the commit ed36a8d15d
("... Updated halt handling for cortex_m3")
prevented cortex_m3_halt() take any action in case of TARGET_RESET state.
This narrowed the target_halt() called from cortex_m3_assert_reset()
to setting target->halt_issued and storing a time stamp.
Introducing ocd_process_reset(_inner) made the setting of halt_issued
and halt_issued_time useless. The Tcl function waits for halt
of all targets if applicable.
cortex_m_halt() and also target_halt() does not work as expected
if the cached target state is TARGET_RESET (although the core could
be out of reset and ready to be halted, just have not been polled).
Explicit Tcl arp_poll must be issued in many scenarios.
Remove the useless hack.
Also remove the explicit error return from cortex_m_halt_one()
in case of RESET_SRST_PULLS_TRST and asserted srst. If the communication
with the target is gated by any reset, cortex_m_write_debug_halt_mask()
fails. Propagate the error return of this call instead.
Change-Id: I0da05b87f43c3d0facb78e54d8f00c1728fe7c46
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8098
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
In a corner case when debug_ap is not available,
cortex_m_assert_reset() asserts reset to restore
communication with the target.
Prevent to do so on targets with defer_examine,
as such targets need some special handling to enable them
after reset anyway.
The change makes possible to handle a multicore Cortex-M SoC with
an auxiliary Cortex-M core(s) switched of by default
even with 'reset_config srst_gates_jtag'
Change-Id: I8cec7a816423e588d5e2e4f7904c81c776eddc42
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8097
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Previously, the gpio_num and chip_num members of adapter_gpio_config
were typed as 'int' and a sentinel value of -1 was used to denote
unconfigured values.
Now, these members are typed as 'unsigned int' to better reflect their
expected value range.
The sentinel value now maps to UINT_MAX as all adapters either define an
upper bound for these members or, in the case of bcm2835gpio, only
operate on a specific chip, in which case the value doesn't matter.
Format specifiers have been left as %d since, when configured, valid
values are within the positive range of 'int'. This allows unconfigured
values to display as a more readable value of -1 instead of UINT_MAX.
Change-Id: Ieb20e5327b2e2e443a8e43d8689cb29538a5c9c1
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8124
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Jlink driver floods the debug log by a message per one poll interval.
Avoid annoying messages, change their logging level to LOG_DEBUG_IO
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I84ea6aa9cdfd44b5985c5393519d1efb7de9530a
Reviewed-on: https://review.openocd.org/c/openocd/+/8116
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
The target esirisc does not free the allocated memory resources,
causing memory leaks at OpenOCD exit.
Add esirisc_free_reg_cache() and esirisc_deinit_target() and use
them to free all the allocated resources.
Change-Id: I17b8ebff54906fa25a37f2d96c01d010a98cffbd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8094
Tested-by: jenkins
Reviewed-by: Steven Stallion <sstallion@gmail.com>
The function in question does not need to change target state. It is a
target-type-dependant function, however, IMHO, it is safe to assume that
any target type would not need to change type-independant state of a
target to figure out the arch.
Change-Id: I607cb3aee6529cd5a97bc1200a0226cf6ef43caf
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8093
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
There are quite a lot of "getters" in target interface.
They do not change target structure, nevertheless the structure is
passed to these functions via a plain pointer.
The intention is to clarify the purpouse of these functions by passing
the `target` structure as a pointer to constant data.
Change-Id: Ida4a798da94938753b86a293a308d93b091d1bf3
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8092
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
- Example for configuring multiple non-SMP
Xtensa cores e.g. for heterogeneous debug
- JTAG only at this time; DAP out of scope
- Dual-Xtensa Palladium example via VDebug
- Update Xtensa core config examples
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I6d2b3d13fa8075416dcd383cf256a3e8582ee1c1
Reviewed-on: https://review.openocd.org/c/openocd/+/8078
Tested-by: jenkins
Reviewed-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This change implements the support for the ARM Debug Interface v6.
The DAP-level interface properly selects the DP Banks and AP address.
Sample ARM configuration DAP and JTAG scripts have been updated.
Change-Id: I7df87ef764bca587697c778810443649a7f46c2b
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8067
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
the socket option RCVLOWAT is not supported on CYGWIN.
implemented ifdef __CYGWIN not to set this option.
Change-Id: I9f6e81fa98ecf5261ea286deb4675658aae59b8e
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8066
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This file is intended to be included in any user's project that
plans to use OpenOCD awareness for uCOS-III.
It is supposed to be distributed under a license compatible with
the uCOS-III code, that is Apache-2.0 license.
Distribute it under Apache License 2.0.
Change-Id: I51ecd469c8ccdd23a069d21e89b7d90886691395
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7996
Tested-by: jenkins
Add the full text of the Apache-2.0 license to the OpenOCD tree.
It has the same content from:
https://spdx.org/licenses/Apache-2.0.html#licenseText
but reformatted as in the Linux kernel document and added the
required tags for reference and tooling.
While this commit is specific for standalone files, it already
reports the information for dual licensing.
Change-Id: I1fd427256c310ab733fb5d50f344ac52c64a56f5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8005
Tested-by: jenkins
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Correct GPIO Extender configuration, after reconsideration,
we need to configure the IO extender 0x23 pins as all inputs.
Add more LOG_ERRORs to the code to better track bugs.
Re-organize angie_init function
Change-Id: I1fcf4919ba9ea95576803dd35cce7dafa26853b4
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8079
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Clang static analyzer warnings
"1st function call argument is an uninitialized value"
on the first libusb_free_transfer() parameter (lines 423, 424)
could turn into a real problem in a corner case:
If allocation of a libusb transfer struct fails, the pointers of not yet
allocated transfers remain uninitialized.
Use calloc() to zero whole struct cmsis_dap_backend_data.
Fixes: fd75e9e542 (jtag/drivers/cmsis_dap_bulk: use asynchronous libusb transfer)
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I0e489757d82d10ed7416c5e8c215e1facc7f8093
Reviewed-on: https://review.openocd.org/c/openocd/+/8045
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The function is used for commands:
- jtag configure
- jtag cget
While there, add the missing .usage field.
Change-Id: I97ddc4898259ddb7fd2d057a997f33a6f4b0e2a8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8058
Tested-by: jenkins
Before this change, when we send an I2C Bulk data at the same
time while Jtag bitbanging functions execute, the microcontroller
puts JTAG bitbanging on wait and executes all I2C bitbanging
function, which causes problems like loss of Ack in DAP responses
and other errors.
With this commit, When I2C interruption occurs, it sets a variable
to true and continues JTAG bitbanging, when it finish it executes
the I2C bitbang.
Change-Id: Ia80bac21f8a259f4a1176b5346bf74ed0aa6e38b
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8074
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add GPIO extender initial configuration that is needed to configure
some important GPIOs and ensure that the dev board is ready to work.
Add i2c_write function that make a write transfer to any slave device.
Give a new Product ID to ANGIE to make it different than the non
programmed ANGIE.
Change-Id: I0a8dacb7fe218145b7d3ed1cb75f106ed6256714
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8072
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Give ANGIE a new PID after renumeration to be able to distinguish
the two cases (programmed and not programmed)
Change-Id: I30a91d8ed2e8e261221488b98d40a027ca41da52
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7991
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
remove angie_clear_queue function from executing before the
angie_execute_queued_commands function and making it at the
end of the reset function.
Change-Id: Id8a0664fbd5b8f9730545ce0f8f272ae0b0e7e78
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7990
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
We want to keep the tri-state buffers located between the FPGA
and the board, in 'Z' state until we launch an i2c connection.
We launch an i2c start condition, make the SCL
direction 'OUT' to start the i2c protocol and at the end
of the i2c connection at the stop condition, we re-make
the tri-state buffers at 'Z' state.
Change-Id: Ic597a70d0427832547f6b539864c24ce20a18c64
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7989
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Send bitstream size to firmware to initialize the GPIF count registers,
since we're going to send this size via GPIF, we need to give the exact
number of bytes to be sent, then the GPIF counter will decrement with
every clock cycle (every byte sent) until reaching zero and stops.
Change-Id: Ib4e8e0f95a6a4a95ef4888ba8a04a0ea45567f5a
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7988
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Change the GPIF state machine, configuring only one of the 4 waveforms
to generate the clock signal (CCLK) used to program the FPGA, and send
one byte every cycle using an 8-bit bus.
Change-Id: I43cf5480b9d5c40cc2f6a62a52ecfe078b76458e
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7976
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
clang build triggers an error for an uninitialized value of the
variable 'instr'.
This is a false positive, as the macro
#define MIPS32_CONFIG3_ISA_MASK (3 << MIPS32_CONFIG3_ISA_SHIFT)
guarantees the switch/case already covers all the possible values
with cases 0, 1, 2 and 3.
Silent clang by adding a useless default case to the switch.
While there, fix the indentation of the switch/case accordingly to
OpenOCD coding style.
Change-Id: I0ae316754ce7d091dd8366bf314b8e6ee780e313
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 7de4b1202d ("target/mips32: add cpu info detection")
Reviewed-on: https://review.openocd.org/c/openocd/+/8065
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Some OpenOCD command gets fragment of TCL scripts as command-line
argument, fragments that will be kept and executed later on.
E.g. the command 'configure' gets the body of an OpenOCD event:
$TARGET configure -event halted {TCL code}
These commands store the argument as a Jim_Obj and pass it to the
jimtcl interpreter when the TCL fragment has to be executed.
Using Jim_Obj as storage is relevant to let the jimtcl interpreter
to recover extra info of the TCL fragment, like the file-name and
the line-number that contain the fragment, that will be printed
out in case of run-time errors.
While converting the commands to COMMAND_HANDLER, we should avoid
storing the argument as C strings otherwise we will loose precious
info in case of run-time errors making challenging the debugging
of such TCL fragments.
Extend the struct command_invocation to contain the array that
points to the Jim_Obj of the command arguments.
This will be used while converting commands to COMMAND_HANDLER.
Change-Id: If37c5f20e9a71349f77ba1571baf1e6778e28aa5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8057
Tested-by: jenkins
The jimtcl interpreter guarantees that the Jim objects in argv[]
are not deallocated during the command execution. Thus, there is
no need to copy the string content of argv[].
Simplify exec_command() by inlining its two sub-functions and
dropping the strdup().
While there, add a LOG_ERROR() for out of memory.
Change-Id: I3e21ed7da50ca0bd072edbd49fca9740c81f95b0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8055
Tested-by: jenkins
The output parameter nwords is always equal to the input parameter
argc, when the function succeeds.
Drop the parameter nwords and let the caller use directly the
value in argc.
While there, convert some 'unsigned' to 'unsigned int'.
Change-Id: Ie3d8ce1351792f3c07fe39cdcbcd180fd24dc928
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8054
Tested-by: jenkins
In both functions script_debug() and script_command_args_alloc()
the variable len is never used, and Jim_GetString() does not
mandate it.
Drop the variable and pass NULL to Jim_GetString().
Change-Id: I754b27a59c6087cde729496be42609d2a7145b0c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8053
Tested-by: jenkins
Tomas Vanek
Antonio Borneo
Erhan Kurubas
Luca Rufer
SydMontague
Sevan Janiyan
Kirill Radkin
wangyanwen
Antonio Borneo
Evan Hunter
N S
Evgeniy Naydanov
Parshintsev Anatoly
Vincent Fazio
Ian Thompson
Jacek Wuwer
Ahmed BOUDJELIDA