this commit fixes a regression introduced in
ba8c1eef5a.
The regression was caused by removal of these lines:
```
- /* Register prefix: "csr_" or "custom_" */
- strcpy(name, reg_type);
- name[strlen(reg_type)] = '_';
```
causing all CSR names with custom names to be parsed as empty strings.
Conflicts are related to `unsigned`->`unisgned int` cleanup:
* `src/jtag/drivers/ftdi.c` -- between
6749c70a3a and
a64dc23bf1.
* `src/rtos/hwthread.c` -- between
ef3e61bebc and
436e6f1770.
* `src/target/target.c` and `.h` -- between
53ec10b61d and
e72733d590.
* `src/target/riscv/*` -- due to
957eb741a0 and
fec3b22421.
Resolved by:
* Changing the return type of `riscv_batch_get_dmi_read_op()` to
`uint32_t`.
* Using RISC-V OpenOCD's version in other cases.
Change-Id: Ia6e2129c6fddb1dec26adcd936506af2539412ef
There was a conflict:
1. commit 2cd8ebf44d ("breakpoints: use 64-bit type for watchpoint mask
and value")
2. commit 0bf3373e80 ("target/breakpoints: Use 'unsigned int' for
length")
The second commit was created erlier, but merged later so the types of
`mask` and `value` became `uint32_t` in `watchpoint_add_internal()`.
This created a bug:
`WATCHPOINT_IGNORE_DATA_VALUE_MASK` is defined as `(~(uint64_t)0)`.
Truncation to uint32_t makes it so the comparisons with the constant
don't work.
Change-Id: I19c414c351f52aff72a60330d83c29db7bbca375
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8500
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Karl Palsson <karlp@tweak.au>
Two cases where single step is needed before resume:
1. ebreak used in software breakpoint;
2. a trigger that is taken just before the instruction
that triggered it is retired.
Signed-off-by: Songhe Zhu <zhusonghe@eswincomputing.com> Co-developed-by: Fei Gao <gaofei@eswincomputing.com> Co-developed-by: xiatianyi <xiatianyi@eswincomputing.com>
In previous implementation, it was known that it does not perform
full reset, and that some peripherals, such as GLB core,
which handles among other stuff GPIOs, was not reset.
It was presumed, that full reset by software is not possible,
although, by accident, even when comment says that
CTRL_PWRON_RESET is set to 1, it is not
(value written into 0x40000018 supposed to be 0x7, not 0x6).
CTRL_PWRON_RESET indeed triggers full "power-on like" reset,
so this method is implemented in this commit.
There are some workarounds to make reset seamless, without any
error messages, which are described in comments of TCL script.
Only down-side of this reset is, that chip is halted after reset
bit later in BootROM than previous implementation,
but it's still good.
Change-Id: Ife2cdcc6a2d96a2e24039bfec149705baf046318
Signed-off-by: Marek Kraus <gamelaster@outlook.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8529
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
`target`'s `state` and `debug_reason` should not be updated in
`deassert_reset` if sending reset acknowledgment fails.
Change-Id: I86136fe829e7a7c6b69f718f0cf32322e40341b0
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Per current OpenOCD conventions, LOG_ERROR should not be printed
when ERROR_COMMAND_SYNTAX_ERROR is returned. OpenOCD will print
the command syntax to the user on its own.
Rename file to get it more generic and add more targets belonging
to the same family.
Add support for two new devices: RZ/V2L and RZ/G3S
Change-Id: Idb7f4d81d2f95ad15ef686e940f43ed29f49f343
Signed-off-by: MicBiso <michele.bisogno.ct@renesas.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8211
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Apply some coding style changes according to the C style guide. The
patch is tested for regression with the 'wiggler' parallel port cable.
Change-Id: I43774f596831d8c46f90f18893418178041a930b
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8516
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Provide cable specific configuration files like for the FTDI interface.
Depcrecate the old configuration files but keep them until the next
release for compatibility reasons.
Change-Id: I436bd60779a107120c9e1b1f0b8a69a39a240ad4
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8514
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Change-Id: Ib0cbd9388d61659f8d47c8f57c09baa6df123487
Signed-off-by: Mark Zhuang <mark.zhuang@spacemit.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8369
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The STLink API that supports dap-direct is available from STLink
firmware v2j24, published in early 2015.
We can reasonably expect that any old STLink still in use today
has got at least one firmware update during the last 10 years.
Most of the board files in upstream OpenOCD still use the STLink
in HLA mode. This limits the test coverage of the dap-direct code,
which was introduced in OpenOCD v0.11.0.
- Rename interface/stlink.cfg as interface/stlink-hla.cfg to still
provide support for HLA, adding a deprecated message.
- Rename interface/stlink-dap.cfg as interface/stlink.cfg to make
dap-direct the default trasport.
- Add a redirect file interface/stlink-dap.cfg for users that have
out-of-tree custom board files.
- Update all the board files to the new setup.
- Remove STLink HLA mentions from the documentation, while adding
a reference to interface/stlink-hla.cfg
Checkpatch-ignore: LONG_LINE
Change-Id: I99366bb03cd3b83f8f408514e657f30e59813063
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8523
Tested-by: jenkins
Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
In multi-target SoC not all the targets are running simultaneously
and some target could be powered off or kept under reset.
Commit 4892e32294 ("target/cortex_m: allow poll quickly get out
of TARGET_RESET state") does not considers the case of a target
that is kept in reset and expects the target to change state from
TARGET_RESET immediately.
This causes OpenOCD to log continuously:
Info : [stm32mp15x.cm4] external reset detected
Info : [stm32mp15x.cm4] external reset detected
Info : [stm32mp15x.cm4] external reset detected
Read again dhcsr to detect the 'stable' reset status and quit,
waiting for next poll to re-check the target's status.
Change-Id: Ic66029b988404a1599bb99bc66d4a8845b8b02c6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 4892e32294 ("target/cortex_m: allow poll quickly get out of TARGET_RESET state")
Reviewed-on: https://review.openocd.org/c/openocd/+/8399
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Adapter Xilinx XVC/PCIe was not appearing in the configuration summary
because of the wrong variable name: build_xlnx_pcie_xvc
instead of enable_xlnx_pcie_xvc.
Also build this adapter automatically on Linux.
Change-Id: I69ea92f550052b9ce55ce32597ac446a15a87388
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8312
Tested-by: jenkins
Reviewed-by: R. Diez <rdiez-2006@rd10.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
There is no need to change if `dcsr.ebreak*` fields after a reset if a
user requested a configuration that will result `dcsr.ebreak*` field
values equal to reset values.
Change-Id: I2844d30aef8f735c7b37394ee422e9b3f04a2e3b
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Existing flags: 'enable_virtual' and 'enable_virt2phys' were
replaced with explicit translation drivers. Motivation:
(1) Having 'enable_virtual' and 'enable_virt2phys' flags set simultaneously
may cause double address translation which is unacceptable
(2) Flags were global for all targets which is wrong too
Signed-off-by: Farid Khaydari <f.khaydari@syntacore.com>
On several packet-handling functions, add "const" to arguments
that represent read-only packet buffers.
For instance on GCC 13.2.0, this code:
const char *some_packet = "...";
gdb_put_packet(conn, some_packet, strlen(some_packet));
would prior to the fix produce warning:
passing argument 2 of ‘gdb_put_packet’ discards ‘const’
qualifier from pointer target type [-Wdiscarded-qualifiers]
Change-Id: Idb62f57d37ed323c39de38982e57afdd3882e280
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8517
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
To help the developers who use Visual Studio Code IDE,
ignore the ".vscode" folder in Git. This folder contains
local configuration of the VSCode workspace.
Change-Id: I1d54d8ce2bd0680f2fa1fb773bb33c786bdcc608
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8518
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Change the prototype of riscv_batch_get_dmi_read_op().
Now that 'target->smp' is unsigned, drop the cast.
Change-Id: I2a54268ed1e4bf0ea884b62cceb73f5c7451da78
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8484
Tested-by: jenkins
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Fix only minor additional checkpatch issue (spacing and line
length).
Change-Id: I11f10eddadc21e051c96eb3d4d4c0554a2cddd15
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8483
Tested-by: jenkins
The firmware in contrib folder use Makefile for the build.
Force checkpatch to check these Makefile for the SPDX.
Change-Id: I815bf6df636c96a15f82c3d8a9de0c4f219303d2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8520
Tested-by: jenkins
If some other TAP is not in BYPASS, an IR scan is needed to select
BYPASS on that TAP.
Change-Id: Iae425a415109b1a853db3718762661877eea56e8
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Parshintsev Anatoly
Evgeniy Naydanov
Anatoly Parshintsev
Farid Khaydari
Evgeniy Naydanov
zhusonghe
Marek Kraus
Mark Zhuang
MicBiso
Marc Schink
Antonio Borneo
R. Diez
Jan Matyas
Florian Fainelli