Sean Anderson d98e7b3adf Add LED blinker ... This module will make it easier to observe internal signals which would otherwise be too short to see, or would trigger too fast to distinguish. Continuous triggered will cause blinking, so signals which are expected to be high for a while (e.g. level-based and not edge-based) should not use this module. Signed-off-by: Sean Anderson <seanga2@gmail.com>		2023-02-18 22:48:36 -05:00
..
axis_mii_tx.v	axis_mii_tx: Add support for half duplex	2023-01-14 00:08:38 -05:00
axis_replay_buffer.v	Use separate process for non-resetting registers	2023-01-13 23:13:12 -05:00
common.vh	Automatically dump signals	2022-10-30 14:20:48 -04:00
descramble.v	descramble: Pass through scrambled_valid	2022-11-05 11:54:39 -04:00
hub_core.v	Add a basic hub	2023-01-21 17:39:25 -05:00
io.vh	Add pmd	2022-08-06 14:02:44 -04:00
iverilog_dump.v	Automatically dump signals	2022-10-30 14:20:48 -04:00
led_blinker.v	Add LED blinker	2023-02-18 22:48:36 -05:00
mdio.v	Automatically dump signals	2022-10-30 14:20:48 -04:00
mdio_io.v	Automatically dump signals	2022-10-30 14:20:48 -04:00
mdio_regs.v	pcs: Add false_carrier signal	2022-11-05 12:37:18 -04:00
mii_elastic_buffer.v	Add MII elastic buffer	2023-02-12 19:53:44 -05:00
mii_io_rx.v	Automatically dump signals	2022-10-30 14:20:48 -04:00
mii_io_tx.v	Automatically dump signals	2022-10-30 14:20:48 -04:00
nrzi_decode.v	nrzi_decode: Add reset input	2022-11-30 18:14:23 -05:00
nrzi_encode.v	Automatically dump signals	2022-10-30 14:20:48 -04:00
pcs.vh	pcs: Split into rx/tx	2022-10-30 21:32:02 -04:00
pcs_rx.v	pcs: Add false_carrier signal	2022-11-05 12:37:18 -04:00
pcs_tx.v	pcs: Split into rx/tx	2022-10-30 21:32:02 -04:00
phy_core.v	phy_core: Simplify collision logic	2022-11-30 18:14:23 -05:00
pmd_dp83223.v	Add DP83223-based PMD	2022-11-30 18:14:23 -05:00
pmd_dp83223_rx.v	pmd: Initialize sd_delay	2023-01-09 20:31:39 -05:00
scramble.v	scramble: Fix initial lfsr value	2023-01-09 20:51:59 -05:00