At the moment the only thing it allows is redirecting `$print` cell
output in a context-dependent manner. In the future, it will allow
customizing handling of `$check` cells (where the default is to abort),
of out-of-range memory accesses, and other runtime conditions with
effects.
This context object also allows a suitably written testbench to add
Verilog-compliant `$time`/`$realtime` handling, albeit it involves
the ceremony of defining a `performer` subclass. Most people will
want something like this to customize `$time`:
int64_t time = 0;
struct : public performer {
int64_t *time_ptr;
int64_t time() const override { return *time_ptr; }
} performer = { &time };
p_top.step(&performer);
This approach to tracking simulation time was a mistake that I did not
catch in review. It has several issues:
1. There is absolutely no requirement to call `step()`, as it is
a convenience function. In particular, `steps` will not be
incremented in submodules if `-noflatten` is used.
2. The semantics of `steps` does not match that of the Verilog `$time`
construct.
3. There is no way to make the semantics of `%t` match that of Verilog.
4. The `module` interface is intentionally very barebones. It is little
more than a container for three method pointers, `reset`, `eval`,
and `commit`. Adding ancillary data to it goes against this.
If similar functionality is introduced again it should probably be
a variable that is global per toplevel design using some object that is
unique for an entire hierarchy of modules, and ideally exposed via
the C API. For now, it is being removed (in this commit) and (in next
commit) the capability is being reintroduced through a context object
that can be specified for `eval()`.
This commit achieves three roughly equally important goals:
1. To bring the rendering code in kernel/fmt.cc and in cxxrtl.h as close
together as possible, with an ideal of only having the bigint library
as the difference between the render functions.
2. To make the treatment of `$time` and `$realtime` in CXXRTL closer to
the Verilog semantics, at least in the formatting code.
3. To change the code generator so that all of the `$print`-to-`string`
conversion code is contained inside of a closure.
There are two reasons to aim for goal (3):
a. Because output redirection through definition of a global ostream
object is neither convenient nor useful for environments where
the output is consumed by other code rather than being printed on
a terminal.
b. Because it may be desirable to, in some cases, ignore the `$print`
cells that are present in the netlist based on a runtime decision.
This is doubly true for an upcoming `$check` cell implementing
assertions, since failing a `$check` would by default cause a crash.
This avoids having to devirtualize them later to get performance back,
and simplifies the code a bit.
The change is prompted by the desire to add a similar observer object
to `eval()`, and a repeated consideration of whether the dispatch on
these should be virtual in first place.
The name `on_commit` was terrible since it would not be called, as one
may conclude from the name, on each `commit()`, but only whenever that
method actually updates a value.
This commit adds a reader/writer implementation for a file format
optimized for fast, single-pass storage and retrieval of design state
changes, as well as a recorder/replayer that integrate with the eval
and commit simulation steps to create replay logs and reproduce them
later.
This feature makes it possible to run a simulation once, recording
the stimulus as well as changes to the registers, and navigate to
a past time point in the simulation later without rerunning it.
Both the changes in inputs (stimulus) and changes in state are saved
so that navigation does not require calling `eval()` or `commit()`;
only a series of memory copy operations.
On a representative example of a SoC netlist, saving the replay log
while simulating it takes 150% of the time it would take to simulate
the same design without logging, which is a much lower overhead than
writing an equivalent full view (including memories) VCD waveform dump.
The replay log is also several times smaller than the VCD dump, and
more space savings are available as low hanging fruit.
Replaying the log has not been optimized and currently takes about
the same time as running the simulation in first place. However, it
is still useful since it provides fast navigation to an arbitrary time
point, something that rerunning the simulation does not allow for.
The current file format should be considered preliminary. It is not
very space-efficient, and my testing shows that a lot of time is spent
in the write() syscall in the kernel. Most likely, compression and/or
writing in another thread could improve performance by 10-20%. This
may be done at a later time.
The commit observer is a structure containing a callback that is invoked
whenever the `commit()` method changes a wire or a memory. This allows
code external to the compiled netlist to react to changes in the design
state in a very efficient way. One example of how this feature can be
used is an efficient implementation of record/replay.
Note that the VCD writer does not benefit from this feature because it
must be able to react to changes in any debug items and not just those
that contain design state.
While the VCD format separates the timescale and the timestep (likely
to allow representing the timestep with a small integer type), time in
CXXRTL is represented using a uniform 96-bit number, which allows for
a ±100 year range at femtosecond resolution.
The implementation uses `value<96>`, which provides fast arithmetic and
comparison operations, as well as conversion to/from a more common
representation of integer seconds plus femtoseconds.
Prior to this fix, the `CxxrtlBackend` used the entire path for the include
directive when a separated interface file is generated (via the `-header`
option). This commit updates the code to use the base name of the interface
file.
Since the C++11 standard is used by default, we cannot take advantage of
the `std::filesystem` to get the basename.
In preparation for substantial expansion of CXXRTL's runtime, this commit
reorganizes the files used by the implementation. Only minimal changes are
required in a consumer.
First, change:
-I$(yosys-config --datdir)/include
to:
-I$(yosys-config --datdir)/include/backends/cxxrtl/runtime
Second, change:
#include <backends/cxxrtl/cxxrtl.h>
to:
#include <cxxrtl/cxxrtl.h>
(and do the same for cxxrtl_vcd.h, etc.)
We add a new flow graph node type, PRINT_SYNC, as they don't get handled
with regular CELL_EVALs. We could probably move this grouping out of
the dump method.
Removing some signed checks and logic where we've already guaranteed the
values to be positive. Indeed, in these cases, if a negative value got
through (per my realisation in the signed fuzz harness), it would cause
an infinite loop due to flooring division.
Before this commit, values, wires, and memories with an initializer
were value-initialized in emitted C++ code. After this commit, all
values, wires, and memories are default-initialized, and the default
constructor of generated modules calls the reset() method, which
assigns the members that have an initializer.
Catherine
Martin Povišer
Merry
Henri Nurmi
Asherah Connor
Charlotte
Michael Nolan
Marcelina Kościelnicka