yosys/tests/arch/common/blockram.v

249 lines
7.3 KiB
Verilog
Raw Permalink Normal View History

`default_nettype none
module sync_ram_sp #(parameter DATA_WIDTH=8, ADDRESS_WIDTH=10)
(input wire write_enable, clk,
input wire [DATA_WIDTH-1:0] data_in,
input wire [ADDRESS_WIDTH-1:0] address_in,
output wire [DATA_WIDTH-1:0] data_out);
localparam WORD = (DATA_WIDTH-1);
localparam DEPTH = (2**ADDRESS_WIDTH-1);
reg [WORD:0] data_out_r;
reg [WORD:0] memory [0:DEPTH];
always @(posedge clk) begin
if (write_enable)
memory[address_in] <= data_in;
data_out_r <= memory[address_in];
end
assign data_out = data_out_r;
endmodule // sync_ram_sp
module sync_ram_sdp #(parameter DATA_WIDTH=8, ADDRESS_WIDTH=10)
(input wire clk, write_enable,
input wire [DATA_WIDTH-1:0] data_in,
input wire [ADDRESS_WIDTH-1:0] address_in_r, address_in_w,
output wire [DATA_WIDTH-1:0] data_out);
localparam WORD = (DATA_WIDTH-1);
localparam DEPTH = (2**ADDRESS_WIDTH-1);
reg [WORD:0] data_out_r;
reg [WORD:0] memory [0:DEPTH];
always @(posedge clk) begin
if (write_enable)
memory[address_in_w] <= data_in;
data_out_r <= memory[address_in_r];
end
assign data_out = data_out_r;
endmodule // sync_ram_sdp
module sync_ram_sdp_wwr #(parameter DATA_WIDTH=8, ADDRESS_WIDTH=10, SHIFT_VAL=1) // wd=16, wa=9
(
input wire clk_w, clk_r, write_enable,
input wire [WORD-1:0] data_in,
input wire [ADDRESS_WIDTH_W-1:0] address_in_w,
input wire [ADDRESS_WIDTH-1:0] address_in_r,
output wire [DATA_WIDTH-1:0] data_out
);
localparam ADDRESS_WIDTH_W = ADDRESS_WIDTH-SHIFT_VAL;
localparam BYTE = DATA_WIDTH;
localparam WORD = DATA_WIDTH<<SHIFT_VAL;
localparam DEPTH = 2**ADDRESS_WIDTH_W;
localparam SUB_DEPTH = 2**SHIFT_VAL;
reg [BYTE-1:0] data_out_r;
reg [BYTE-1:0] memory [0:DEPTH-1];
integer i;
always @(posedge clk_w) begin
for (i=0; i<SUB_DEPTH; i=i+1)
if (write_enable)
memory[{address_in_w, i}] <= data_in[i*BYTE+:BYTE];
end
always @(posedge clk_r) begin
data_out_r <= memory[address_in_r];
end
assign data_out = data_out_r;
endmodule // sync_ram_sdp_wwr
module sync_ram_sdp_wrr #(parameter DATA_WIDTH=8, ADDRESS_WIDTH=10, SHIFT_VAL=1) // rd=16, ra=9
2023-11-29 14:16:12 -06:00
(
input wire clk_w, clk_r, write_enable,
input wire [DATA_WIDTH-1:0] data_in,
input wire [ADDRESS_WIDTH-1:0] address_in_w,
input wire [ADDRESS_WIDTH_R-1:0] address_in_r,
output wire [WORD-1:0] data_out
2023-11-29 14:16:12 -06:00
);
localparam ADDRESS_WIDTH_R = ADDRESS_WIDTH-SHIFT_VAL;
localparam BYTE = DATA_WIDTH;
localparam WORD = BYTE<<SHIFT_VAL;
localparam DEPTH = 2**ADDRESS_WIDTH;
localparam SUB_DEPTH = 2**SHIFT_VAL;
2023-11-29 14:16:12 -06:00
reg [WORD-1:0] data_out_r;
reg [BYTE-1:0] memory [0:DEPTH-1];
2023-11-29 14:16:12 -06:00
always @(posedge clk_w) begin
if (write_enable)
memory[address_in_w] <= data_in;
2023-11-29 14:16:12 -06:00
end
integer i;
2023-11-29 14:16:12 -06:00
always @(posedge clk_r) begin
for (i=0; i<SUB_DEPTH; i=i+1)
data_out_r[i*BYTE+:BYTE] <= memory[{address_in_r, i}];
2023-11-29 14:16:12 -06:00
end
assign data_out = data_out_r;
endmodule // sync_ram_sdp_wrr
module double_sync_ram_sdp #(parameter DATA_WIDTH_A=8, ADDRESS_WIDTH_A=10, DATA_WIDTH_B=8, ADDRESS_WIDTH_B=10)
(
input wire write_enable_a, clk_a,
input wire [DATA_WIDTH_A-1:0] data_in_a,
input wire [ADDRESS_WIDTH_A-1:0] address_in_r_a, address_in_w_a,
output wire [DATA_WIDTH_A-1:0] data_out_a,
input wire write_enable_b, clk_b,
input wire [DATA_WIDTH_B-1:0] data_in_b,
input wire [ADDRESS_WIDTH_B-1:0] address_in_r_b, address_in_w_b,
output wire [DATA_WIDTH_B-1:0] data_out_b
);
sync_ram_sdp #(
.DATA_WIDTH(DATA_WIDTH_A),
.ADDRESS_WIDTH(ADDRESS_WIDTH_A)
) a_ram (
.write_enable(write_enable_a),
.clk(clk_a),
.data_in(data_in_a),
.address_in_r(address_in_r_a),
.address_in_w(address_in_w_a),
.data_out(data_out_a)
);
sync_ram_sdp #(
.DATA_WIDTH(DATA_WIDTH_B),
.ADDRESS_WIDTH(ADDRESS_WIDTH_B)
) b_ram (
.write_enable(write_enable_b),
.clk(clk_b),
.data_in(data_in_b),
.address_in_r(address_in_r_b),
.address_in_w(address_in_w_b),
.data_out(data_out_b)
);
endmodule // double_sync_ram_sdp
module sync_ram_tdp #(parameter DATA_WIDTH=8, ADDRESS_WIDTH=10)
(input wire clk_a, clk_b,
input wire write_enable_a, write_enable_b,
input wire read_enable_a, read_enable_b,
input wire [DATA_WIDTH-1:0] write_data_a, write_data_b,
input wire [ADDRESS_WIDTH-1:0] addr_a, addr_b,
output reg [DATA_WIDTH-1:0] read_data_a, read_data_b);
localparam WORD = (DATA_WIDTH-1);
localparam DEPTH = (2**ADDRESS_WIDTH-1);
reg [WORD:0] mem [0:DEPTH];
always @(posedge clk_a) begin
if (write_enable_a)
mem[addr_a] <= write_data_a;
else
read_data_a <= mem[addr_a];
end
always @(posedge clk_b) begin
if (write_enable_b)
mem[addr_b] <= write_data_b;
else
read_data_b <= mem[addr_b];
end
endmodule // sync_ram_tdp
module double_sync_ram_tdp #(parameter DATA_WIDTH=8, ADDRESS_WIDTH=10)
(
input wire clk_a_0,
input wire write_enable_a_0, read_enable_a_0,
input wire [DATA_WIDTH-1:0] write_data_a_0,
input wire [ADDRESS_WIDTH-1:0] addr_a_0,
output wire [DATA_WIDTH-1:0] read_data_a_0,
input wire clk_a_1,
input wire write_enable_a_1, read_enable_a_1,
input wire [DATA_WIDTH-1:0] write_data_a_1,
input wire [ADDRESS_WIDTH-1:0] addr_a_1,
output wire [DATA_WIDTH-1:0] read_data_a_1,
input wire clk_b_0,
input wire write_enable_b_0, read_enable_b_0,
input wire [DATA_WIDTH-1:0] write_data_b_0,
input wire [ADDRESS_WIDTH-1:0] addr_b_0,
output wire [DATA_WIDTH-1:0] read_data_b_0,
input wire clk_b_1,
input wire write_enable_b_1, read_enable_b_1,
input wire [DATA_WIDTH-1:0] write_data_b_1,
input wire [ADDRESS_WIDTH-1:0] addr_b_1,
output wire [DATA_WIDTH-1:0] read_data_b_1
);
sync_ram_tdp #(
.DATA_WIDTH(DATA_WIDTH),
.ADDRESS_WIDTH(ADDRESS_WIDTH)
) ram_0 (
.clk_a(clk_a_0),
.clk_b(clk_b_0),
.write_enable_a(write_enable_a_0),
.write_enable_b(write_enable_b_0),
.read_enable_a(read_enable_a_0),
.read_enable_b(read_enable_b_0),
.write_data_a(write_data_a_0),
.write_data_b(write_data_b_0),
.addr_a(addr_a_0),
.addr_b(addr_b_0),
.read_data_a(read_data_a_0),
.read_data_b(read_data_b_0)
);
sync_ram_tdp #(
.DATA_WIDTH(DATA_WIDTH),
.ADDRESS_WIDTH(ADDRESS_WIDTH)
) ram_1 (
.clk_a(clk_a_1),
.clk_b(clk_b_1),
.write_enable_a(write_enable_a_1),
.write_enable_b(write_enable_b_1),
.read_enable_a(read_enable_a_1),
.read_enable_b(read_enable_b_1),
.write_data_a(write_data_a_1),
.write_data_b(write_data_b_1),
.addr_a(addr_a_1),
.addr_b(addr_b_1),
.read_data_a(read_data_a_1),
.read_data_b(read_data_b_1)
);
endmodule // double_sync_ram_tdp