* Change: In bootstrap/FindBootstrap.cmake, new setup_qwt() macro to
link with the Qwt library build with Qt 5 *or* Qt 4 and not the
first found.
* Change: In Hurricane/DbU, uses <int64_t> instead of <long> to always be
sure that we use 64 bits integers for coordinates.
* Change: In Katana/KatanaEngine::_gutKatana() checks that the
RoutingPlanes have been allocateds before trying to delete them.
* New: In Anabatic::AutoSegment, introduce a the kind (associated to a
flag) "LongLocal". Analog GCells can be very wide, so at least some
carefuly choosen long local segments must be took into account as
attractors in the computation of the optimal axis.
* New: In Anabatic::AutoSegment::computeOptimal(), take LongLocal into
account as attractors.
* Change: In ::GCellTopology constructors compare the layers of the
RoutingPads using layer masks instead of Layer pointers. Allows to
find both "METALx" (symbolic) and "metalX" (real).
* Change: In ::GCellTopology::_doHChannel(), _doChannel(), _doStrut()
and _doDevice(), tag long locals as "LongLocal". This need to be
reviewed as it as bind done a bit too quickly.
* Change: In Anabatic::AutoSegment, due too a much bigger span of the
analogic GCells the _optimalMin & _optimalMax bitfields must use
16 bits instead of 8 (they where overflowed).
* New: In Katana, reorganisation of the initialization procedure to fit
both digital and analogic cases. Create an analogInit() method.
* Change: In Katana::RoutingEvent, the _tracksNb and _tracksFree bitfields
where too short for the Analog GCell size, now uses 16 bits instead of
6.
* Bug: In Katana::GraphicKatanEngine::drawGCell(), skip drawing of a
GCell if *both* width and height are under 150 pixels.
* New: In Katana::Session, add a new isOpen() method.
* Bug: In Anabatic::RawGCellsUnder, *again*, the north and east borders
of the whole area *are* includeds (shut up disgraceful warning).
* New: In Anabatic::GCell, add a display mode to select between boundary
display (for analogic) and density display (for numeric).
* Bug: In KatanaEngine::runGlobalRouter(), do not check if an Edge cannot
be desatured when the vector or overloaded Edges is empty.
(one less disgraceful warning)
* New: In GraphicKatanaEngine::drawGCell(), support for drawing the GCells
in density mode. Use the fire scale and the MaxDensity mode.
Setup the GCell drawing mode in GraphicKatanaEngine::initGCell().
* Change: In GraphicKatanaEngine::drawEdge(), adjust the various thresholds
for showing the Edge and its label.
* New: In CRL Core, adds "anabatic.gcell.displayMode" to the set of Anabatic
parameters.
Adjust the showing threshold for GCells in "display.conf" so when the
zoom level is low, we still can see the density map.
* Bug: In Hurricane, in NetlistWidget CTOR, the horizontal header was set
up assuing that there was (at least) three sections (column) in the
model, which was wrong. Now it is done in the setCell() method which
know the exact number of sections.
It was a bug in both Qt 4 & 5, but was showing only under Qt 5.
* Bug: In Anabatic::GCell, when width and/or heigh is null, do not try to
compute densities as it will trigger a divide by zero (and do not make
much sense anyway).
* Change: In CRL Core, in cmos/alliance.conf, honor the ALLIANCE_TOP variable
if it is found in the user's environement.
* New: In Bootstrap, add cmake detection for libbfd.
* New: In Hurricane, in Backtrace, add BFD support to read debuginfo from
the shared libraries (aka DSO) when compiled with "-g". This avoid the
tedious step of running gdb after generating a core dump. It is also
mandatory in ExceptioWidget to known from where an exception was thrown
as Qt::notify() block all C++ exceptions.
Currently works only under Linux (gcc or clang), may be extended in
the future.
The BFD reading is based on the small utility from:
Don Hatch (hatch@plunk.org)
http://www.plunk.org/~hatch/goodies/backtracefilt.C
And small trinket: adjust the size of the window for high DPI screens.
* New: In CRL Core & Unicorn add link toward libbfd, if needed.
* Bug: In Anabatic:
- In _propagate(), on reaching a target, forgot to remove it from
the queue before pushing it back with the new distance. It also
simplificate the core algorithm as target as treated normal nodes.
* New: In Anabatic:
- Update cdebug to use the fastest macro version.
- More readable drawings of GCells and Edges.
- Added timer support.
- The distance is now computed in DbU::Unit (aka long) and not in
normalized float.
- The distance function is now a callback (std::function<>) that
can be changed (a default is provided at initialization).
- New concept of branch in the agglomerated connex component.
Each trace back part create a "branch" (tagged with a "branchId").
When a node is reached with the same distance, but from two
different branches, choose the the branch that was lastly created.
This create a slightly different tree which grows outward from
the newest branches.
- Makes the horizontal edges *slightly* longer than the vertical ones
to skew the tree to use vertical edges, as it is usually less
congested than the horiontal one (due to metal1 cell terminals).
It is also my understanding that it is useful to reduce the
number of vias, whithout introducing a via cost.
* New: In Bootstrap:
- Script sprof.py to perform sprof & demangle libraries execution
profile.
* ToDo: In Anabatic:
- Corner optimization. Sometimes when two corners are possible, the
wrong one is choosen. That is, one of it's edge cannot be used for
further grow of the tree.
* Change: In Hurricane Commons.h, even when cdebug print nothing, it slow
down the program (three times for Kite!). Create a macro cdebug_log
which calls cdebug *only* if the debug level is active.
* Change: In Hurricane::Observer, simplification of the template so that
we can use it directly instead of creating a derived class with an
implementation of Observer::notify(). Now the implemenation is the
same for all and just calls a notify() method on the owner object.
Create a StaticObservable for fast access of the observers. This
is mainly a fixed size table (array<>) with oberservers at known
indexes. This way we can go from the obervable to the observer
owner in one indirect access (or so I hope).
* Change: In Hurricane::CellViewer, use the new observers.
* Change: In Hurricane::ControllerWidget, use the new observers.
* Change: In Hurricane::CellWidget, set the winidow initial size to a
more sensible 500px.
* Change: In CRL::LibraryManager, use the new observers.
* Change: In CRL::LibraryManager, use the new observers.
* Change: In CRL, in display.conf & technology.conf, modification for
the ST hcmos9gp capacitors.
* Change: In Hurricane, in CellWidget, enable the drawing of ExtensionGos
according to the the threshold paramaters (as layers do).
* Change: In CRL Core, provide DrawingStyle for Anabatic::GCell &
Anabatic::Edge. Use the exact name of the ExtensionGo.
In kite.conf, add settings for the size of an edge as the optimal
size may change between analog & digital designs.
* New: In Anabatic:
- Support for fast position query using a matrix.
- Computation of the Edge capacity, based on the routing gauge parameters.
- Graphic display of the edges capacity. Added configuration
parameters to size the bounding box of an Edge.
* Bug: In Anabatic:
- GCell::_moveEdges was both too complex (some cases never arise the
way we divide GCells) and bugged.
* Change: In Hurricane, in Flags add operator overload for "int" type
and not only "unsigned int". Otherwise the compiler complaints about
ambiguous overload when using enum values which are considered as
"int".
Simpler code for the BaseFlags::contains() method.
Added implicit conversion from BaseFlags toward bool type.
* Change: In Hurricane, in Commons, complete replacement of the previous
two trace systems (trace & ltrace) by a stream-based one.
As it is a true object it is much less fragile than the one based
on defines (but maybe a little slower).
Define a reservation table for the trace levels for all the
Coriolis & Chams components.
* Change: All tools, use the new trace system.
* Change: In Bootstrap, in coriolisEnv.py no longer sets the environment
variable STRATUS_MAPPING_NAME (guessed by init).
* Change: In CRL Core, in System CTOR sets the default value for
"stratus1.mappingName" to "not_set" so the init can known it is not
set.
In etc/coriolis2/*/stratus1.conf, do not set "stratus1.mappingName".
In coriolisInit.py, now guess the value of "stratus1.mappingName"
if it has not already been set by the user. The complete setting
process is as follow (decreasing priority):
1. Setup by the user in his ".coriolis2/setting.py".
2. A "stratus.xml" file is detected in the current technological
directory (example: etc/coriolis2/65/cmos065/setting.xml).
3. Fallback value to "etc/coriolis2/stratus2sxlib.xml".
* Change: In Hurricane, in PyHurricane.h, in all DirectSet*() macros,
suppress the third parameter giving the function name. It is now
build from stringification of other parameters.
The various macros calls are also modificated all througout
Isobar.
Added PyAny_AsInt() to convert a Python Int or Long into an int.
Maybe we should manage only long, because the type difference seems
ambiguous in Python itself.
* Change: In Hurricane, in PyHurricane.h, in DirectGetBoolAttribute()
deduce the function name to display in messages from the arguments.
Idem for DirectIsAFromCStringAttribute(), DirectGetIntAttribute(),
DirectGetUIntAttribute(), DirectGetDoubleAttribute() and
DirectGetStringAttribute().
* New: In Hurricane, in PyHurricane.h, new macro DirectGetNameAttribute()
to build accessors for method returning a Name.
* New: In Hurricane, in PyHurricane.h, new macro DirectSetIntAttribute()
to build modificators taking int arguments.
* Bug: In Hurricane, in PyHurricane.h, in macro DirectSetBoolAttribute(),
the check for a boolean PyObject was wrong, leading the macro to
systematically emit a Python exception.
* Bug: In Hurricane, in PyInstance method table, PyLibrary_create() was
registered as a NOARGS function, but it *do* have arguments, change
to VARARGS.
* Bug: In CRL Core, in scmos_deep_018/technology.conf, the extension
width in PTRANS/NTRANS active layer was too big. 4.0l instead of
3.0l. This was preventing seeing gaps in the active layer by cgt.
They did show up under Graal though...
* New: In CRL Core, in RoutingLayerGauge, adds a new parameter "obstacleDw".
It represents the distance to add from the *edge* of a blockage segment
to the next *axis* of a routing track. This was previously computed as
the pitch minus the mimimum half wire width. This works if the pitch
is *equal* to the wire width plus the minimal distance (edge to edge).
But if the wire width is less, than it leads to too great a distance
around obstacles, making them bigger than they are. And potentially
blocking everything. To summarize:
before: obstacleDw = pitch - wireWidth/2 (deduced)
after: obstacleDw = explicitly setup, usually:
pitch - max(wireWidth)/2
Modify the Alliance configuration helper and the various kite.conf
file accordingly.
* New: In Kite, in BuildPowerRails, make use of "obstacleDw" to compute
the footprint of a blockage.
* In CRL Core, in BlifParser, when an input terminal of an instance is
either connected to power or ground, insert a zero_x0 or one_x0
Cell to avoid direct connection to the supply (the router is not
able to do it). The names and terminals of the intermediate cells
are hard-wired for now (to SxLib).
When merging Nets, always merge internal nets into external ones
as the other way around is not always legal.
* In Hurricane, in Cell::flattenedNets(), if the cell has already been
flattened, do not issue warnings about duplictated flattened nets.
* In Hurricane, in Net, allow Net::setName() to switch the main name
for an alias without complaining about an already used name.
* In Cumulus, in RSavePlugin.py, when "views" is supplied in keywords
(kw) arguments, override the default instead of merging with it.
This is to allow scripts to save exactly what views they want.
* Change: In Hurricane, in DataBase::CellDepths() the recursion stop
criterion must be Cell::isLeaf() and not Cell::isTerminal() as
the second one can be used to hide some levels of hierarchy,
and we want all of them in a blob.
* New: In Hurricane, in Cell, create a new Slaveds relation to keep
track of all the Cells with a slaved abutment box. This work is
incomplete as we do not manage the behavior in case of merge or
Cell destruction or slaving Cells with aready slaveds ones.
Modify Cell::setAbutmentBox() to work in both autonomous and
slaved mode.
* New: In Hurricane, in Net, add a new type of Net: BLOCKAGE this
avoid us to be dependant on the framework pattern recognition.
(change propagated to the Python support)
* New: In CRL Core, in the various drivers, recognize blockage nets
as such and set their type accordingly.
* Change: In CRL, in Toolbox::deleteEmptyNets(), preserve blockage
Nets. This was the cause of crashs in Kite::BuildPowerRails() as
we where trying to use a deleted blockage net...
* Bug: In Hurricane, in NetAlias, do not write NetAlias as a name
but as a type. They were not read back and moreover staying in
the JSON parser stack.
* Bug: In CRL Core, in BlifParser, recognize clocks (Alliance patterns).
* Change: In Cumulus, in RSavePlugin, "kw" manage a new "views" to
specify which views must be saved. Physical by default, but sometimes
we need logical as well. If the design contains uniquified cells,
save the logical view.
In ClockTree, abort the clock tree building if the design has no
top level clock.
* Change: In Katabatic, in GCellTopology, adds 2G_5M1 configuration.
* Bug: Kite, in BuildPowerRails, if we are not in a chip the nets
composing the H-Tree must be protecteds be blockages.
* Bug: In Hurricane, in HApplication, ExceptionWidget ans PyHurricane.h,
forgot to catch the Hurricane::Bug exception which was leading to
terminate() without explanations.
* Change: In Katabatic, In GCellTopology, now support one GCell with
five metal1 terminal of the same net. This unlikely configuration
did appear in the SNX for the first time...
* Change: In CRL Core, the Alliance VHDL (vst) driver was renaming the
names of Cells, Instances and Nets into their VHDL conterparts.
But if we still work on the Cell after saving it, the Net renaming
will cause touble, especially when there are DeepNets. The name
of the DeepNet is generated from the Occurrence name with the dot
separator which is *not* a VHDL valid character for name, thus
after that the DeepNet name has changed it cannot be reassociated
with the Occurrence path. This was causing double-flattening issues.
* Bug: In CRL Core, in VhdlEntity, when a scalar signal is also global,
two ScalarSignal where created, but only one can be linked as a
property on a Net. So when the one *not* linked as a property was
deleted, an infinite loop started (under Cygwin at least).
The _globals list now contains pointers to signals that are in
_signals. The _globals elements no longer needs to be deleted.
* Bug: In Hurricane, in Cell::_preDestroy(), the classic mistake again:
do not iterate over a collection while deleting it's elements.
Now should be safe.
* Change: In CRL Core, set the default display style to "Alliance.Classic [black]"
(my favorite).
* Test: post-receive hook on server should send mail [1].
* New: In VLSISAPD, in Parameter, callback have now a tag, which the
pointer to the caller. This allow for the callback removal when
the caller is destroyed.
* New: In VLSISAPD, in WidgetDescription, when associated to a parameter,
the destructor must remove the associated callback function on
the Parameter.
* New: In Hurricane, added JSON support for Configuration, separated
from vlsisapd, as the support is not available at this point.
JSON support for Configuration, Parameter & LayoutDescription.
* Change: In Hurricane, in JsonStack, the stack of JsonObjects has been
displaced here from HurricaneHandler. This way, all
JsonObject::toData() can access the JsonOjects in the context
of the parser.
* New: In Hurricane, in DBo::toJson() added support for Entity by
reference (ids).
* New: In Hurricane, added JSON support for all Layer sub-class types.
* New: In Hurricane, in Technology, export the Layers, but must be
sorted by increasing mask value.
* New: In Hurricane, in Entity, added support for Entity by reference (ids).
* New: In Hurricane, in DataBase, added technology full support.
* New: In Hurricane, In JsonNet, move the ring rebuild management from
JsonStack to JsonNet.
* New: In Hurricane, added JSON support for NetAlias, NetExternalcomponents
(not cleanly implemented as a Relation).
* New: In Hurricane, new method Cell::fromJson() to load a cell from
a JSON file.
* New: In Hurricane, In Graphics, make it an observable, for when JSON
fully reload the graphic state, it must be able to notify other
objects (namely the Controller).
* New: In Hurricane, in ControllerWidget, observe the Graphics to regenerate
the palette as needed. New method ControllerTab::graphicsUpdated().
* New: In Hurricane, in RawDrawingStyle added a destructor to release the
Qt pen/brush. Added JSON support for HSVr, DrawingStyle, DrawingGroup,
& DisplayStyle.
* New: In Hurricane, in GraphicsWidget, rewrite correctly the readGraphics()
to erase the previous widgets and re-create the new ones.
* New: In Hurricane, in PaletteWidget, correct re-creation of the layout/widgets
in case of Graphics change.
* New: In CRL Core, in System, register the parameters callbacks with
the address of the object, for later deletion.
* New: In CRL Core, in AllianceFramework, make it observable, to notify
library changes. For the AllianceFramework creation, now allow to
completly bypass the Python initialization system, when we expect
to restore it from a full blob. Added methods to sets the default
RoutingGauge & CellGauge.
* New: In CRL Core, added JSON suppport for CellGauge, RoutingLayerGauge
& RoutingGauge.
* New: In CRL Core, in LibraryManager, oberver AllianceFramework, to update
the list of libraries in case of change (for JSON full reload).
* New: In boostrap, in ccb.py, added support for the "support" project
which contains external dependencies. Currently contains only
RapidJSON. Those dependencies must be cloned here manually.
* New: In Hurricane, Initializer class for an ordered static initialization
across different compilation modules.
* Change: In Hurricane, at DataBase level, no longer save the Cells in
the libraries, but create and ordered list of Cell. Deepest cells
(leaf cells) first. To avoid dependency problems.
* New: In Hurricane, JSON support for Property.
* New; In CRL, added JSON support for AllianceFramework, Environement &
Catalog and their associated properties. Adjustment of the
AllianceLibrary creation policy.
* New: In Hurricane, added first support for DataBase native import/export
using JSON.
We choose RapidJSON, in SAX mode, to manage the JSON format low level
Read/Write. Thus, it's Git repository http://github.com/miloyip/rapidjson
must be added under ~/coriolis-2.x/src and manually build and installed
in the Coriolis installation tree (to be integrated in ccb later).
Two mode are being supported:
1. Cell mode: one Cell only is saved. In that mode, Entities
referred by Occurrences are "outside" the file. They are coded
through their "signature" (mostly, all the values of their
attributes). The ids saved in the file cannot be restored
identically as we cannot predict when and in which context the
Cell will be reloaded.
2. Design Blob mode: the whole design hierarchy, down and including
the standard cells is saved. This way the design is completly
self contained and Entities ared referred through their ids.
A design blob can only be loaded immediatly after starting cgt
as the DataBase *must* be empty. This way we restore the whole
design hierarchy with *exactly* the same ids.
Now, Hurricane object should provide a "toJson()" method for driving
JSON, and be associated with a JsonObject derived class for parsing.
* New: In Hurricane, ability to force the next id that will be used for a
DBo (used by Design Blob Mode).
* New: In Hurricane, in DataBase, added getCell() and getLibrary() functions
to allow the hierarchical access of a Cell/Library in native mode
(i.e. whithout the requirement of AllianceFramework).
* New: In Hurricane, In CellViewer, added menu entry for Save/Load of
JSON Design Blobs. Added at this level because we consider it as the
"native" format of Hurricane.
* New: In Unicorn, added support of import/export of JSON Cell.
* Bug: In Hurricane, in Instance, when cloning an Instance or uniquifying
it's master Cell, we forgot about the Occurrences (through shared pathes).
When an instance is cloned the Shared pathes still points toward the
original Instance. And when it's the master Cell that is uniquifyed
it's the Entities pointed to that remains in the original Cell.
This is a software design problem. It is difficult to define what
policy to adopt when uniquifying: basically that means that one
Occurence is either moved onto the clone or duplicated. Furthermore,
it is not trivial to known what Occurrence is pointing on the
uniquifyed/cloned item. Have to think about it a little more.
* Bug: In Etesian, in EtesianEngine, build the flattened nets and their
RoutingPads *after* uniquifying (through slaving bounding boxes).
This way we avoid the Occurrences problem described above.
* Bug: In Etesian, in EtesianEngine, invalidate the RoutingPad after
processing the placement so they are put into the right quadtree.
This problem is due to the fact that the RoutingPads do not belong
to the Instance that they refer. And when this instance is moved
around, she doesn't inform the RoutingPad that is has moved.
More software architecture design to review...
* Bug: In CRL Core, in Vst driver, remove VhdlEntity (from Cell) and
BitProperty/Bit (from Net) with the property remove and not the
destroy() method. The BitProperty removal was completly forgotten
leading to the use of removed Signals when doing multiple saves
(hence core-dump).
* Change: In CRL Core, in Vst driver, never save as Signals the DeepNets
as they are created by a virtual flatten and do not connect any
instances at top level. Note that they will exists in the physical
file if routing layout has been created.
* Change: In Knik, in Vertex, add a "blocked" flag to signal disabled
vertexes in the grid (must not be used by the global router).
Modificate the Graph::getVertex() method so that when a vertex
is geometrically queried, if is a blocked one, return a non-blocked
neighbor. This mechanism is introduced to, at last, prevent the
global router to go *under* the pad in case of a commplete chip.
* New: In Katabatic, in AutoSegment, a new state has been added: "reduced".
A reduced segment is in the same layer as it's perpandiculars.
To be reduced, a segments has to be connected on source & target to
AutoContactTurn, both of the perpandiculars must be of the same layer
(below or above) and it's length must not exceed one pitch in the
perpandicular direction.
To reduce an AutoSegment, call ::reduce() and to revert the state,
call ::raise(). Two associated predicates are associated:
::canReduce() and ::mustRaise().
Note: No two adjacent segments can be reduced at the same time.
* Bug: In Katabatic, in GCellTopology, add a new method ::doRp_AccessPad()
to connect to the pads. Create wiring, fixed and non managed by
Katabatic, to connect the pad connector layer to the lowest routing
layers (depth 1 & 2). The former implementation was sometimes leading
to gaps (sheared contact) that *must not* occurs during the building
stage.
Remark: This bug did put under the light the fact that the initial
wiring must be created without gaps. Gaps are closed by making doglegs
on contacts. But this mechanism could only work when the database if
fully initialised (the cache is up to date). Otherwise various problems
arise, in the canonization process for example.
* New: In Katabatic, in AutoContactTerminal::getNativeConstraintBox(),
when anchored on a RoutingPad, now take account the potential rotation
of the Path's transformation. Here again, for the chip's pads.
* New: In Kite, support for reduced AutoSegment. TrackSegment associateds
to reduced AutoSegment are *not* inserted into track to become
effectively invisibles. When a segment becomes reduced, a TrackEvent
is generated to remove it. Conversely when it is raised a RoutingEvent
is created/rescheduled to insert it. All this is mostly managed inside
the Session::revalidate() method.
* New: In Kite, in KiteEngine::createGlobalGraph(), in case of a chip,
mark all global routing vertexes (Knik) that are under a pad, as blockeds.
* Bug: In Cumulus, in PadsCorona.Side.getAxis(), inversion between X and
Y coordinate of the chip size. Did not show until a non-square chip
was routed (i.e. our MIPS R3000).
* Change: In Stratus1, in st_placement.py add the ClockBuffer class for
backward compatibility with the MIPS32 bench. Have to review this
functionnality coming from the deprecated placeAndroute.py.
In st_instance.py, no longer creates the Plug ring of a Net.
In my opinion it just clutter the display until the P&R is called.
Can re-enable later as an option (in Unicorn).
* Change: In Unicorn, in cgt.py, more reliable way of loading then running
user supplied scripts. Borrowed from alliance-checker-toolkit doChip.py .
* New: In Hurricane, added hierarchy browser in the controller.
The hierarchy is presented as a tree. New MVC, HierarchyInformations,
HierarchyModel and HierarchyBrowser.
When using a data model which is not directly connect inside the
model, we must use the internalPointer field of the QModelIndex.
But this field is also used by the QSortFilterproxymodel, this
prevent using it with a Tree model.
The filter is directly implemented and is specific to each
Instance entry.
* Change: In CellWidget & CellWidget::State, now store the Cell and
a Path, this way we can keep track of the hierarchy when browsing.
The Path is in the State and so propagated back to the Controller.
* Change: In HierarchyCommand, use the Path with setCell().
* New: In Hurricane, in Cell & Instance, add the ability to merge the
QuadTree when *second level* instances of a Cell are placed in
the same space as the top Cell. This is the case of a deeply
hierarchical design made of only standard cells that are to
be placed in a "flat" manner.
The design is uniquified then the intermediate instances models,
which should be unique at that point have their QuadTree merged
through a call to Instance::slaveAbutmentBox(). That method will
make the model of the instance use the QuadTree of the Cell to
which the instance belong. The instance model no longer posseses
a dedicated QuadTree. As a corollary the abutment box of both
Cell are kept identical and the Instance has it's transformation
set to (0,0,ID).
Remark: when we talk about "QuadTree", we mean in fact the
QuadTree for the instances *and* the SliceMap (Layer+QuadTree).
Consequence in Query: when going through the resulting
"flattened" QuadTree we will find objects with an incomplete
Path du to the fact that we didn't have to explore their
Instance/Cell level to reach them. The shunted part of the
Path is stored in the Go master Cell in the _shuntedPath
attribute. This also affect the displayed depth of hierarchy,
but not too badly.
* New: In Hurricane, in Cell, new methods:
- Cell::updatePlacedFlag() : set the placement flags.
- Cell::isUnique() : one or less instance.
- Cell::isUniquified() : is the result of an uniquification.
- Cell::isUniquifyMaster() : is the reference cell of the
uniquification.
* Change: In Hurricane, in Cell::Uniquify(), uniquify a Cell only
if it is unplaced. We do not need to duplicate placed Cells
(see datapathes).
* Bug: In Hurricane, In NetAlias::removeAlias(), perform the isMaster()
check on the *current* hook, not the *this* one... Was preventing the
removal of most aliases.
* New: In CRL Core, in DefExport, perform a virtual flatten before exporting
a design. Replace the hard-wired "sxlib" gauge by the current default
one. More secure management of flattened instance and net names (removal
of all potentially special characters). In net names, correct management
of vectorized names (do not systematically add "_net" at the end).
In DefImport, manage the BUSBITS property and revectorize accordingly
the net names. When loading nets, systematically remove the alias of
the temporary net "__prebuild__" (a bug in NetAlias was preventing it).
In LefExport, the right value of MANUFACTURINGGRID in pseudo symbolic
mode is 0.5 (expressed in lamba). That way all length are even multiples
of it. Note that there is still the order bug of the 5.7 drivers that
puts that entry *before* UNITS in the LEF file (bad bad Cadence).
* New: In Hurricane, dedicated class BaseFlags to wrap a set of flags.
Similar to the Mask class, only with a slightly different semantic.
Encapsulation of <unsigned int>.
Also provide support for the Inspector, to have a human-readable
display of the flags.
* Change: In Hurricane, in Cell, regroup all the flags under a Flags
sub-class of Cell. No more mixing between booleans and bit flags.
(first use of BaseClass).
* In Hurricane, CRL Core & Knik, many small corrections to suppress
annoying warning messages at compile time.
Most noticeably, Bison errors in VstParserGrammar generated by
rules and token with mismatched return value type. This was not
problematic because the badly defined return value where not used.
But still...
* Bug: In CRL Core, in VectorPortMap::VhdlPortMap(), if the connection
was made to *non-contiguous* bits of an otherwise *contiguous* vector,
it was using a span instead of the separate bits. Now check that
bits are contiguous (delta: +1/-1) and the delta do not change of
sign.
* Change: In Etesian & Kite, the Python interface function ::setViewer()
was checking that the argument was indeed a CellViewer, but in text
mode it is None. Now, silently ignore the argument if it cannot be
converted into CellViewer.
* New: In Hurricane, in Collection add simple STL iterator support.
So now the C++11 "for" instruction can be used instead of the
in-house "forEach".
Example:
forEach ( Component*, icomponent, net->getComponents() ) {
cout << (*icomponent) << endl;
}
Become:
for ( Component icomponent : net->getComponents() ) {
cout << icomponent << endl;
}
* Change: In bootstrap, in FindLEFDEF.cmake, adds my personal path where
the LEF/DEF libraries are to be found (~jpc/oa/lefdef/5.7-s038/).
* Change: In CRL Core, in LEF/DEF exporters, use the default routing
gauge and cell gauge, instead of systematically requiring "sxlib".
IMPORTANT: In order to build a *shared* library including the
*static* LEF/DEF libraries, those libraries, even if static, must
be build with the "-fPIC" flag (otherwise the compiler complains).
I have done so on my 64 bit build of LEF/DEF, but it's a completly
*local* patch. You may have to do it manually on your installations.
* Change: In CRL Core, replace duplicated libraries, even when performing
a Append/Prepend operation. Also correct a bug in library name
uniquification, event if it's no used. The policy in cas of duplicate
libraries is not completly clear for me, still.
* New: In Hurricane, in Graphics, add a new static method ::isHighDpi()
which returns true if the DPI is greater than 192. A "normal" screen
is typically 96dpi, we sets the trigger at twice that value.
Then in all the widgets with size settings, we uses that method to
select the more appropriate size.
* Bug: In Hurricane, in PyHurricane.h the macro HCATCH was not catching
standard STL exceptions. This was the source of the cryptic message:
"Fatal Python error: Py_EndInterpreter: thread still has a frame"
The Python interpreter was interrupted uncleanly bypassing it's own
exceptions mechanism.
In PyViewer, the Viewer *do not* inherit from a base class (in the
Python export).
* New: In Hurricane, in DbU, compute maximum values (in double) for
grid, lambda & physical (in meter) so now the DbU::toGrid(),
DbU::toLambda() & DbU::toPhysical() methods can check for out of
bound values, and throw an exception.
* Change: In Hurricane, ExceptionWidget::catchAllWrapper() now returns
a boolean, set to <true> if an exception has been catched. Allow
callers to interrupt themselves if a problem has occured.
* Bug: In Kite & Etesian, in the Python wrapper, send a Python exception
if catchAllwrapper() did return true, instead of continuing...
* Change: In Kite & Etesian, adds a setViewer() method (exported in Python)
to use the graphical ExceptionWidget when in graphic mode.
* Bug: In Cumulus, in PadsCorona.py the check for the core vs. chip size
was not returning False when invalid.
* New: In CRL Core, in Vst driver, add a support IEEE VHDL. Inactive for
now as I don't see clearly the policy for selecting it or not.
Remove the code of the old Vst driver.
In Blif parser, check for non-existent models (incomplete or
corrupted Blif file). Found by G. Gouvine.
* New: Added extras file for IDE-like support under Emacs.
* New: In CRL Core, in VstParser, support IEEE VHDL, with tokens
<library> and <use>. If "use IEEE.std_logic_1164.ALL" is present
the file will be considered to be IEEE compliant.
To be precise, the parser now support any mix between Alliance
and IEEE VHDL. So you can have both <std_logic> and <wor_bit>
in the same file, but it is unclean to do that.
The two extensions ".vhd" & ".vhdl" are supported.
The drivers still always creates Alliance VHDL.
* New: In CRL Core, created a LibraryManager widget. It provides a
composite information based on what is present, for each
Alliance library:
1. - A Cell in memory, without Catalog::State.
2. - A Catalog::State, with or whithout the Cell in memory.
3. - The files of the Cell in the librariy's directory.
4. - A file with a format referenced for one of the importers.
File type recognition is based *only* on the file extension,
so it may easily confused. Be careful about what you put in
the library's directory.
One of the big limitation is that it will not display Hurricane
libraries that do not have the AllianceLibrary extension.
This widget is put in a separate library <libmanager>, included
in the default CRLCORE_LIBRARIES.
* Change: In CRL Core, in State (through the loader), now sets the
InMemory flag (event if nobody uses it yet...). Display it in
the state _getString().
In AllianceFramework, new getAllianceLibraries() method.
In CatalogExtension, make the static method "get()" publicly
accessible, for sometimes we want the whole State.
* Bug: In vlsisapd, in Path, the pathcache was not rebuild when it
should, leading to incorrect results.
* New: In vlsisapd, in Path, added a listdir() method to access the
contents of a directory and a stat() method to poll the status
of a file/directory.
Rename the ".string()" method in ".toString()" to avoid
tricky name resolution with std::string, refactor in all the
other tools.
* Change: In Hurricane, in Controller, no longer oversize the fonts
of the table's headers.
* New: In Unicorn, in UnicornGui, integrate LibraryManager.
* Error messages are more explicit in Ap and Blif parsers
* Warns when not using tie cells
* New layer synonym in ApParser for easier format conversion
* Blif import is now on top
* Bug: In Hurricane, in NetAlias, bad Record construction of the _next
field.
* New: In CRL Core, in VstDriver complete replacement of the old Vst
driver. Needed cleaner architecture to manage correctly files
importeds through the Blif parser, which are Verilog like.
It is build as an extension trough property and is not kept
in sync with the Cell. So it's use should be transient only.
* Change: In CRL Core, in NamingScheme forgot to change '.' (dot)
forbidden character into '_'.
* Change: In Cumulus, in the RSave plugins, remove the VHDL extensions
after saving.
* New: In Hurricane, In NetAlias & Net, add an AliasList collection to
iterate over all the aliases names (this *not* include the main
net name).
* New: In Hurricane, In Cell, Instance & Net add support for cloning and
uniquification (update documentation).
All Cells that are uniquified from a given model are kept in an
Uniquify relation. This relation allows to get all the clones and
generate unique clone names by adding a "_uXX" suffix.
* Bug: In Hurricane, the Cell::_isFlattenLeaf attribute was not initialized
in the constructor.
* Change: In CRL Core, in AllianceFramework::getCell(), no longer destroy
a partially loaded Cell in case of parser failure, let the incomplete
Cell be.
* New: In CRL Core, in ApParser, if all the instances are placed, sets the
Cell::Placed flag.
* Change: In CRL Core, in BlifParser, complete rewrite of the parser.
Not so good an idea afterwards...
* New: In Etesian, uniquify the design before placing.
* Change: In Kite, display the list of unrouted wired after all other
statistics.
* New: In Hurricane, In Cell, add Placed and Routed flags to know the
state of the Cell.
* Change: In CRL Core, In ApDriver, do not save the RoutingPads as
external connectors if the design is *not* routed (create
conflics on reload with the newly generated RoutingPads).
* Change: In Etesian, set the Placed flag on the Cell.
* Change: In Kite, set the Routed flag on the Cell.
* Change: In Cumulus, in RSavePluginAll, save the layout only if it
has a bounding box.
* New: In Hurricane, In Net & Cell, support for Net aliases names.
Use a structure based on a simple ring of NetAliasHook. The Net
holds a global map, sorted by names of all the aliases of all Nets.
Elements NetAliasesHook of the map are slaves of ring whose master
is an attribute of the Net (it is *not* in the map, as the primary
name of the Net).
In case of merge, the aliases of both Nets are merged and the
name of the merged one become an alias.
The Cell::getNet() looks in both the Net map and the aliases to
find a Net by name.
* Bug: In CRL Core, in coriolisInit.py, reoder the loading of the
configuration files so the real technology is read as early as
possible to set up the <gridsPerLambda> factor before any lambda
is actually computed...
* Bug: In CRL Core, in AcmSigda, do not try to fed the file when it
has failed to be opened. Throw a clean exception instead.
* New: In CRL Core, in Toolbox, add a NamingScheme object to convert
a design into VHDL compliant names (mainly from Blif/Verilog).
This is extensible in any case.
* New: In CRL Core, in BlifParser, slightly more informative warning
messages. Align the loading progress information on the other
parsers.
Add a capability to select which component of the design will
be returned, if there are more than one. Use the "." as separator.
For exemple you can request "Processor.Alu", which will load
the "Alu" component from the design in "Processor.blif".
To be able to save a Blif loaded design, systematically convert
all the name for VHDL compliance, as it is the format used by
the Coriolis native files (vst).
Export the Blif parser to the Python interface.
* New: In Kite, In NegociateWindow, add a counter of the number of
remaining events. Gives an idea of the ETA...
* New: In Unicorn, in cgt.by, add an option to load a Blif design from
the command line.
* New: In Cumulus, new RSave plugin to save both netlist & layout.
Partly redundant with the previous one. Have to better organize
that later.
* Change: In CRL Core, simplify the loading sequence. The technology,
both symbolic and real is now loaded directly from coriolisInit.py
and not through the Alliance loader. This was a leftover from the
time configuration was in XML. Remove others traces of XML loading.
Remove SYMB_TECHNO_NAME, REAL_TECHNO_NAME & DISPLAY from the Alliance
environement, as they was no longer used.
Note that technology *still* need to be loader *after* Alliance
framework has been initialized.
Gauge information is moved from <alliance.conf> to <kite.conf>.
* Bug: In Coloquinte, in optimization_subproblems.cxx static variables
must not be inlined. Generate a problem when linking in debug mode
(seems the symbol gets optimised out).
* Bug: In Katabatic, in Grid::getGCell(), when the coordinate is *outside*
the area, do not try to find a GCell, directly return NULL.
* New: In Unicorn, create a generic command launcher named "coriolis" which
automatically take cares of all environement setup, then run a command
by default, it's <cgt>, but it can be anything. For example: <zsh>.
* New: In CRL Core, remove obsoleted XML files, no longer needed by
Chams. Add stub for technologies CMOS065 (ST) and C35B4, aka
AMS 035.
* Bug: In Knik, update the path where to find the FLUTE lookup tables.
(from 2.4 to 3.1).
* New: In Hurricane, In CellWidget, add methods to emit CellPreModificated
and CellPostModificated Qt signals (from non-Qt aware objects).
* New: In Unicorn, In ImportCell, parsers are now dynamically hooked
in the importer, allowing third party application (i.e. Chams) to
add their own. See the ImportCell::addImporter() method.
* Bug: In Unicorn, in FindUNICORN.cmake, seems to be unable to detect
the UnicornGui.h. Not a blocking problem because the include dir
is shared with other tools correctly detected. But still...
* New: In VLSISAPD, in Configuration, add a new priority level UserFile
to distinguish between the system configuration files and the user's
configuration files (which take precedence).
* New: In Hurricane, in Script (Python), improve the API to be able
to support Chams (and remove the duplicate capability from it).
Add separate functions to perform the initialize/run(s)/finalize
cycle step by step.
* Change: In CRL Core, rename real technology <hcmos9> to <hcmos9gp>,
it's offcial name from CMP/ST. This is the 130nm.
Move the reading of the symbolic & real technologies names from
coriolisInit.py to helpers.__init__.py, to be shared with
chamsInit.py.
To avoid a clash of names inside of helpers, the two variables
of techno.py are renamed "symbolicTechnology" and "realTechnology".
Move python init system from crlcore/src/crlcore to crlcore/python.
* New: In CRL Core, In Utilities, add site-packages/pharos to the
PYTHONPATH.
* Change: In Kite, move python init system from kite/src/init to
kite/python.
* Bug: In CRL Core, in Ispd05Bookshelf, as the pitch is already expressed
in DbU, do not apply DbU::toLambda() in any expression where it is used.
* Change: In Etesian, In AddFeeds, do not try insert feeds if there is no
cell feed avalaible.
* Change: In Bootstrap & ccb, the coloquinte project is renamed into
"importeds", it will be the home of all the externally
devellopped softwares that are needed to build Coriolis.
Add explicit support for Fedora ("Linux.fc") and uses
site-packages, as everybody else.
* New: In CRL Core, in etc/, adds the configuration files for Etesian.
* New: In Etesian, activate the Configuration object. Now uses it's
own configuration variables instead of borrowing those of
Nimbus & Mauka.
* Change: In Documentation, updated User's Guide to present Etesian
as the placer, instead of Mauka.
* Change: In Cumulus, slight change in ClokTreePlugin and ChipPlugin
to match the new Etesian/Python interface.
* New: In Bootstrap, in ccb.py, check if cmake is installed and issue
a warning, if not.
* New: In Hurricane, added Cell::getDeepNet() to search for a deepnet
given a path and a leaf net. This method is slow and must not be
used too often. Introduced for Kite::BuildPowerRails().
* Change: In CRL Core, in cmos/alliance.conf, modify the clock name
pattern to match the sub-clock signals in the datapath operators.
* Bug: In Etesian, do not blindly reset the top cell abutment-box.
Do it only if it's empty, otherwise keep it.
* Bug: In Kite, in buildPowerRails(), in getRootNet() the management
of clock nets was incomplete. The case of unrouted clock nets
that where not connected to the top core clock net, like the
one in the datapath registers was faulty. They were partly
recognized as unrouteds and partly as blockage generating a
routing deadlock: routage impossible due to blockage generated
from itself...
* New: In Stratus1, add a buildModel() utility function to automate
the model generation and allow a call by the model name (string).
* Change: In Unicorn, in cgt.py, display the Alliance environement.
* New: In Hurricane, in DebugSession, add a new method to activate the
trace inconditionally with a certain level.
* New: In Hurricane, in HyperNet, allow copy construction as there is
no reason to disallow it and we need it now.
* New: In Hurricane, in Cell::flattenNets(), add a new option to prevent
the flattening of the clock net(s). For more safety perform the
DeepNet creation *outside* the Collection loop.
* Bug: In Hurricane, in Cell_HyperNetRootNetOccurrences, skip the
DeepNets because they are the result of another flattening operation.
* New: In Isobar, in PyBasicLayer, export C++ method getBlockageLayer().
* New: In Isobar, in PyRoutingGauge, export C++ method getLayerPitch(),
needed by Cumulus plugins.
* New: In Etesian, EtesianEngine::findYSpin() to look for the Y orientation
if some cells are already placed. Typically the buffers of a clock
tree.
Pass the correct orienation to row_compatible_orientation().
Do not try to add feeds in the ISPD05 benchmarks. For now the
benchmarks are detected through their names (unreliable).
* Change: In Knik, in KnikEngine::initGlobalRouting(), allow the clock
to be routed as an ordinary signal when the clock tree is not
used.
* New: In Kite, in BuildPowerRails, management & detection for the
pre-routed clock.
In KiteEngine constructor, early initialization of the blockage
net to avoid later troubles in BuildPowerRails.
* New: In Cumulus, in ChipPlugin, add support for Etesian plus new
configuration parameter 'clockTree.placerEngine' to select between
Mauka and Etesian.
* New: In Cumulus, in BlockCorona, add blockages in the vertical sides
in the vertical layer to prevent the router to use the vertical
tracks in under the prower lines (for example, blockage in M3
with power line M5).
In Cumulus, in ChipConf add attribute to access the blockage net.
* New: In Cumulus, when the clock tree is disabled, do not generate
the last rail around the block (the clock rail).
* Bug: In Cumulus, in ChipConf use the clock pad to guess the clock
signals and *not* the power pad.
Add more meaningful error messages if a pad global signal is
not found (implicit connexion by name).
* Bug: In Cumulus, in ClockTree, compute correctly the cells Y spin,
that is *from the bottom of the cell AB* (not from 'zero').
* Bug: In Bootstrap, in coriolisEnv.py, check if devtoolset-2 is already
active before launching it as a sub-shell.
* Bug: In Isobar, In PyHurricane.h, DBoDestroyAttribute() set the proxy
pointer toward the C++ object to NULL. So when the Python object is
deleted no double-deletion occurs on the C++ object.
Add some more trace information in Python link/dealloc.
* Change: In CRL Core, in cyclop, make CMakeLists.txt automatically
choose the right rule for linking the binary wether we use Qt 4 or
Qt 5. Very irksome problem.
* New: In EtesianEngine::addFeed(), do not take into account instances
that are not placed entirely inside the top cell abutment box (was
causing a core dump).
* Bug: In Katabatic, in GCellQueue, correct a mismatch between a GCell
set and the iterators used upon it.
* Bug: In Mauka, in Row & Surface correct a mismatch between a container
and it's iterator.
* New: In Etesian, updated to work with the latest Coloquinte, patch
contributed by G. Gouvine.
Added EtesianEngine::setDefaultAb() to compute an abutment box if
the Cell is completly unplaced.
* New: In cumulus, in ClockTree, now the placer can be configured to be
either Mauka (slow simulated annealing) or Etesian (fast analytic).
New setting 'clockTree.placerEngine' in plugin settings.
* New: In Bootstrap, in Builder & coriolisEnv.py support for RHEL7/SL7.
The sub-directory name is 'el7_64'.
In qt_setup() add QtSvg to list of Qt5 & Qt4 used libraries.
* New: In Hurricane, In Cell add a placeholder for flags. First use to
store whether the Nets have been transhierarchically flatteneds.
* New: In Hurricane, In NetRoutingState add an Unconnected flag for
more accurate diagnosis.
* New: Hurricane, in CellViewer add an entry menu for stress tests.
The script must be named "stressScript.py" in the cwd.
* Change: In CRL Core, in display.conf add a scaling parameter for the
display threhold of the layer. This way we can adapt to different
standard cells height.
* Change: In CRL Core, in ISPD05 bookshelf loader, use the pitch of the
cell gauge instead of a hard-wired 5.0.
* Change: In Cumulus, in ClockTreePlugin, add support for Etesian placer
and a new configuration parameter to choose between Mauka/Etesian.
* New: In Etesian, support for the latest Coloquinte.
Add feed insertion stage.
* Bug: In Kite, In BuildPowerRails, check that _ck is not NULL before
tring to access it's name...
* Change: In Kite, check if the Cell has it's Nets flattened before
doing it (or not).
* Change: In CRL Core, in VstParserGrammar.yy display in which mode a file
is read. Behavioral, structural or model. Model is the step of reading
the instance's models before truly reading the file.
In addition, a small optimization, when in behavioral mode, parse
the file only once.
* Bug: In CRL Core, in VstParserGrammar.yy & VstParserScanner.ll, accurate
error message positions (file & line numbers).
When generating error message, we cannot pass char* on variables that
will be deallocated by the throw. So generate a string that will be
copied along with the exception. That problems explain numerous
core-dump when encountering syntaxes errors in the file.
* New: In Bootstrap, added support for RHEL7 in ccb.py & coriolisEnv.py.
In coriolisEnv.py, under RHEL6, directly launch a shell under
devtoolset-2 (do not put it in .bashrc).
* Change: All tools, compliance with Clang 3.2.
- Call using namespace std *after* at least one include of std has
been used.
- In Utilities.h define both const and non-cont overload for operator<<
of mstream (this was the true cause of the Banner display problem).
- No longer use defaults arguments in templates, instead create two
separated overloads.
- Put template static attributes allocation outside of namespaces
(this one I'm not sure how to justify).
- Protect by NDEBUG variables that are only needed in assert().
- In PyInterval getUnion() & getIntersection() we where silently
overwriting the "self" object (interval).
- In Mauka, *do no* overload _postCreate() and add an argument, breaks
the virtual function mechanism. Rename it into _maukaPostCreate().
Idem for SubRow().
- In Katabatic::GCell(), invalidate() overload a Go funtion but is
used for different purpose at this level. Rename it invalidateCt()
(invalidate *ConTents*).
- Miscellaneous small cleanup.
* Change: In CRL Core, in coriolisInit.py now read the configuration
files from a ".coriolis2/" directory. This is to avoid too many
dot files in the user's directory. Files have also been renamed:
.coriolis2.conf ==> .coriolis2/settings.conf
.coriolis2_techno.conf ==> .coriolis2/techno.conf
* Change: In Kite, in kiteInit.py follow the same policy as CRL Core
for configuration file.
.coriolis2.kite.py ==> .coriolis2/kite.py
* Change: In Hurricane, the NetRoutingProperty is moved into Hurricane
from Katabatic. Needed for Knik to be able to access thoses
informations.
* Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in
case of identical area, select the component of lowest id.
This should not be needed if the component ordering was fully
deterministic as it should be (will investigate later).
This is to ensure that the choosen component is always the
same, especially between save/load of a global routing.
* Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate
the segments only if the topology is valid (no NULL in the
cached segments).
* Bug: In Katabatic, in GCellTopology::construct(), throw an error
if the topology is bad instead of trying to continue (and core
dump later... ).
* Bug: In Kite, in BuildPowerRails, distinguish the name of the master
net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the
name of the net in the *chip* netlist. Must use the later to make
comparison as they may differs.
* Change: In Knik, in save/load solution, exclude nets that are not
globally routed by Knik. That is which NetRoutingProperty is not
*Automatic*.
* Bug: In Cumulus, in chip.BlockPower take account of the layer
width extention to sligthy shrink the connector thus avoiding a
notch with standart cell in some cases.
* Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner
trees for the leaf clocks, as it seems overconstrained for the
router. First move was to lower them in M2/M3 (instead of M3/M4)
but that was not sufficent.
* New: In Cumulus, RSavePlugin for recursively saving a physical
hierarchy.
* New: In documentation, first embryo for RDS file. Should have been
in Alliance git, but I prefer to keep newest doc in Coriolis.
* New: In CRL Core, in helpers & alliance.conf, set and read a "PAD"
variable to define the pad model name extension ("px" for "sxlib
and "pxr" for vsxlib, this is provisional).
* New: In CRL Core, in plugin.conf, add parameters to define the name
of used for power & clock supply. We may remove the extention in
the future (to be more coherent with the previous modification).
* New: In Cumulus, in chip.Configuration.GaugeConf._rpAccess(), no
longer place the accessing contact *at the center* of the
RoutingPad. It works under sxlib because buffers & registers all
have same size terminals. But this is not true under vsxlib,
leading to misaligned contacts & wires. Now systematically place
on the slice midlle track (maybe with one pitch above or below).
This is still very weak as we do not check if the terminal
reach were the contact is being put. Has to be strenthened in
the future.
* New: In Cumulus, in chip.Configuration.ChipConf, read the new
clock & power pad parameters.
* Change: In Isobar (and all other Python wrappers), uses PyLong instead
of PyInt for DbU conversions. In PyHurricane argument converter,
automatically check for both PyLong and then PyInt.
* Change: In Cumulus, in chip.PadsCorona, more accurate error message
in case of discrepency in global net connections (i.e. no net
of the same name in instance model and instance model owner.
* Change: In Kite, in BuildPowerRails, when looking up at the pads
model name to find "pck_" or "pvddeck_", do not compare the
extension part. But we still use hard-coded stem pad names,
maybe we shouldn't.
* Bug: In Katabatic, in GCellConfiguration::_do_xG_xM1_xM3(), there
was a loop in the search of the best N/E initial RoutingPad.
* Bug: In Kite, in KiteEngine::protectRoutingPads(), *do not* protect
RoutingPads of fixed nets, they are already through the
BuildPowerRails stage (and it's causing scary overlap warning
messages).
* Bug: In Cumulus, in ClockTree.HTreeNode.addLeaf(), do not create
deep-plug when the core is flat (not sub-modules). All the new
nets are at core level.
* Bug: In Cumulus, in ChipPlugin.PlaceCore.doFloorplan(), ensure
that the core is aligned on the GCell grid (i.e. the slice
grid of the overall chip).
* Bug: In Kite, in GCellTopology::_do_xG_xM1_xM3(), infinite loop
while looking for the bigger N-E RoutingPad. Forgot to decrement
the index...
* New: In ClockTree plugin, select the name of the buffer cell through
configuration (parameter: "clockTree.buffer"), and guess the I/O
name of this buffer automatically.
Put configuration parameters in plugin.conf and not mauka.conf.
Bug: strangely triggers a coredump in components collection
when used with <vsxlib>. Some debug printing still active until
that is solved.
* New: In Chip plugin, make the size and numbers of the block rails
configuration parameters (in plugin.conf).
* Change: In Hurricane, in Plug::setNet(), more informative error messages.
* Change: In Hurricane, In Segment, more informative error messages.
* Change: In Hurricane, In DeepNet, accessor for the Net occurrence.
* Bug: In Katabatic, in AutoSegment::create(), error message uses correct
variables (vertical was using horizontal)...
* Change: In Kite, in BuildPowerRails, already existing wiring in instances
is copied up as blockage. Uses blockage layer instead of true layer
(it was a bug).
* Change: In Kite, in BuildPreRouted, consider as manual global routing
nets with only default wiring (default size wire & contacts).
Non-default routing is flagged as fixed (with the NetRoutingState
property).
* New: In Cumulus, first versions of the ClockTree and Chip plugins.
Clock Tree plugin:
- It is strongly advised to use have 4 metal routing layers for the
tree to work. Otherwise, problems can arise with the detailed
routing (fully obstructed terminals).
- H-Tree can only be build (for now) for design with a form factor
between 0.5 an 2.
- The tree is created at the block top-level and only the leafs are
trans-hierarchically created on the instances/models. The new
cell with a clock tree, along with all it's sub-models is created
with a "_clocked" suffix.
- Leaf cells are connected through a simple Minimum Steiner Tree.
- Shorts are avoided by a systematic shift of the wires according
to their kind. No wire must pre-exist. When used as a sub-module
of "chip" the wires cannot be moved. When created on a block,
the wires can be loaded in the detailed router as manual global
router.
Chip Plugin:
- Perform the pad placement and corona creation. Replacement at
last of the clunky code from Wu Yifei.
- Relies on a Python configuration file '<design>_chip.py' with
a "chip" dictionnary.
* Bug: In CRL Core, in agdsDriver, the flags of the Query where sets to
process only the top-level Cell. Now process the whole hierarchy (the
Cell is completly flattened by this operation). Secondary bug: the
transformation was not applied to the bounding boxes, resulting of
all the cells stacked in (0,0) ...
* New: In CRL Core, added configuration for SCMOS_DEEP symbolic technology
up to 180nm "scmos_deep_018". It is postfixed "_018" because it is not
yet compliant with 130nm (asymetrical VIA metal extensions).
Added the associated real technology SCN6M_DEEP (TSMC 180nm).
* Change: In CRL Core, in Alliance.py, no longer requires the
configuration file to uses symbols from CRL.Environment or
CRL.RoutingLayerGauge. This way the <alliance.conf> file can be
parsed by a different parser.
In <alliance.conf>, for the various technologies, make uses
of the new C++ independent constants.
* New: In CRL Core, in helpers/__init__.py, provide a "Dots" class
(rewrite the C++ one in pure Python).
* New: In Unicorn, in ExportCellDialog and UnicornGui add an entry to
call the ASCII/GDSII export driver.
* New: In CRL Core, in AgdsDriver, checks for off-grid coordinates (that
is non-integer one) and round them with a warning. This is most
likely that the layout is flawed but it will at leat generate a
readable ASCII/GDSII file.
* New: In Cumulus, new Alliance.py module (*not* a plugin) providing
an encapsulation for Alliance command line tools. The other main
feature is that it provides a "Makefile like" behavior. Based on
the command dependencies a DAG is contructed, then a static
ordering of the commands. Commands are then executed to rebuild
outdated target.
The Alliance environment supplied to the commands is read from
the Coriolis configuration file <alliance.conf>.
For this first evaluation version, only <boom>, <boog> and
<loon> support are provided.
It still not clear how to encapsulate the Coriolis tools in
the same way.
* Change: In CRL Core, in helpers/__init__.py, change the way the static
initialization (module) is done. All the commands are put inside
a "staticInitialization()" function, which is then explicitly
called by others. This is a better solution agains *no* or *twice*
initialization. Modificate <coriolisInit.py> accordingly (as
<Alliance.py> from Cumulus.
* Change: In bootstrap, in ccb & builder, build by default with Qt4 and
provide a --qt5 command line switch to enable Qt5.
FindBootstrap.cmake now provides a qtX_wrap_cpp() macros to be
independant of the version of Qt being used.
Add all thoses options to the graphical interface to the builder.
* Change: In all the tools using Qt, switch to the qtX_*() macros from
FindBootstrap.cmake.
* Change: In Hurricane, in CellViewer, revert to the Qt4 way of connecting
signal/slots for backward compatibility.
Finally get rid of the demonic code from Wu Yifei...
* New: In Isobar, added encapsulation of Interval (don't know how have
forgotten it for so long).
* Change: In Isobar, In PyLayer, new PyLink_LayerDerived() function to
create/link the C++ object to the correct derived class and not the
base one (PyLayer) which then prevent to use the specialized methods.
Must replace PyLink_Layer() througout all the code.
* Change: In Isobar, in PyPoint the "setX()" & "setY()" methods where
still capitalized.
* Change: In Isobar, in PyQuery, complete the exportation of the C++
interface. remove the code belonging to a more "boost" way of
building the Python interface (will do that in a far future).
* New: In CRL Core, In PyAllianceFramework, export isPad() method.
* Change: In Unicorn, in unicornInit.py, protect the loading of each
single plugin by a "try" / "except" clause to the failing of one
plugins do not stop the loading of the next one.
Pass the same dictionnary argument to unicornHook() as for
ScripMain(), this is more uniform this way.
* New: In Cumulus, complete replacement of the chip placement scripts
from Wu Yifei (at last!). The clock-tree integration is still to
be done.
________________________________________________________________________
* New: In all to CMakeLists.txt, disable the warning about deprecated
WIN32 under cygwin.
* New: In boostrap, in ccb.py, coriolisEnv.py and builder/Configuration.py
add recognition in uname for the values returned under Windows/Cygwin.
* New: In Documenation, in UsersGuide.rst add some informations about
Cygwin and a section for the devel branch.
* New: In Kite, in protectCagedTerminal(), check that the perpandicular
top METAL3 track is free before inserting the fixed protection.
They are added *after* the Pre-Routed stage and therefore we have
to check they do not cross.
* Change: In Kite, in NegociateWindow, print statistics before fixing
segment in the pre-routed stage to get correct results.
* Change, In CRL Core, in Measures when an addMeasure is performed
twice, let the new data erase the previous one (instead of keeping
the previous one).
* New: In Katabatic, add the ability to decorate some (i.e. few) nets
with a state that indicate to Katabatic & Kite what to do with it.
The possible states are:
1. Fixed : all the wire are in fixed positions. The router cannot
move them and account them as obstacles.
2. ManualGlobalRoute : a user-defined topology is supplied. The
wires still have to be detailed route in "Detailed Pre-Route"
but will be skipped for the global routing and fixed for the
general Detailed route.
3. AutomaticGlobalRoute : ordinary nets, to be global routed then
detail routed.
4. Excluded : do not try to global or detail route thoses nets.
5. MixedPreRoute : mask combining Fixed and ManualGlobalRoute.
Not all nets have this property, only those that needs a special
processing.
To ease the access to the state, it is nested inside a
PrivateProperty in the net (NetRoutingProperty), with an extension
access class (NetRoutingExtension).
* New: In Kite, take account of NetRoutingState. Pointers to the
net's states are strored inside an internal map for faster access.
The property is *not* deleted when Kite is destroyed. The property
will remains until the Net itself is destroyed.
As a consequence, the lists that where passed to high level
function are removed as the information can now be accessed directly
through the net NetRoutingProperty.
* New: In Unicorn, in CgtMain, comply with the update interface.
* New: In documentation, update the User's Guide to explain the Pre-routed
step of Kite.
* Change: In Isobar, the Python interface was not exactly mirroring the
C++ one, now it is the case. The Python code should look likes almost
exactly like the C++ one, the only differences remaining being due
to the languages respective syntaxes. Note that in the case of
constructor functions, it leads to a slightly longer notation in
Python that it could have been (mimic the ".create()" static
member). Main modifications:
1. Mirror the static constructor syntax with create():
Cell( ... ) ==> Cell.create( ... )
2. Correct hierarchy for constants in Instance, Net, Pin
& Transformation. For example:
Hurricane.PlacementStatusFIXED
==> Hurricane.Instance.PlacementStatus.FIXED
Hurricane.OrientationID
==> Hurricane.Transformation.Orientation.ID
Hurricane.TypeLOGICAL ==> Hurricane.Net.Type.LOGICAL
Hurricane.DirectionIN ==> Hurricane.Net.Direction.IN
* Change: In CRL Core, correction to match the improved Python API
in the configutation helpers.
* Change: In Cumulus, correction to match the improved Python API.
* Change: In Stratus, correction to match the improved Python API.
* Change: In Documenation, update for the new Python interface
(both user's guide & examples).
* Note: We must port those changes into Chams for it to continue
to run.
* Change: In Documenation, update the Python script support part.
* New: In Hurricane, in CellViewer, create a simpler API to graft menu
and actions into the menubar. Mainly addToMenu() which take care of
the QAction creation but also locate the relevant QMenu, base on
the Qt object name. Regroup all the widget & action creation inside
the body of the constructor, this way almost all actions can be
removed from the attributes of the CellViewer.
addToMenu() is supplied in three flavors:
1. For C++ callbacks in GraphicToolEngines (with a binded
member function method).
2. For running Python scripts to be used by the plugin system.
3. To insert separator in menus (to give a more homogeneous
look).
Remove the last remnants of Stratus scripts (unificated with basic
Python scripts).
* New: In Hurricane, in PyCellViewer, export the interface to graft
Python scripts into the CellViewer menu tree.
* Change: In Etesian, in GraphicEtesianEngine, use the new API to
graft menus & callbacks into the CellViewer.
* Change: In Mauka, in GraphicMaukaEngine, use the new API to
graft menus & callbacks into the CellViewer.
* Change: In Kite, in GraphicKiteEngine, use the new API to
graft menus & callbacks into the CellViewer.
* New: In Cumulus, install Python scripts as plugins for Unicorn under
<PYTHON_SITE_PACKAGES>/cumulus/plugins/.
* New: In Unicorn, in UnicornGui, make uses of the new API for creating
menus in the CellViewer. Creates the stem menu for the P&R tools.
Add a Python initialization mechanism to read the plugins
installeds into <PYTHON_SITE_PACKAGES>/cumulus/plugins/.
* Change: In Kite, Katabatic & Knik, express the number of tracks truly
available to the global router by the number of tracks reserved to
the local routage inside a GCell. Replace the ratio parameter
"hEdgeCapacity" by an integer parameter "hTracksReservedLocal"
(duplicate for verticals).
It is more explicit to give directly the number of tracks that
are to be used locally, and potentially saves us from rouding
problems when calculating the number of availables tracks.
Note: we cannot do that for the layer saturateRatio as it
uses the density ratio that take account local wires, leading
to fractional results.
* Change: In Katabatic, in <GCellGrid>, rename checkEdgeSaturation()
into checkEdgeOverflow(), more explicit.
* Change: In Knik, in <Graph>, display the computed capacities of the
lower left node edges (should be the same througout all the grid).
* Change: In Unicorn, in <cgt.py>, uses the new parameters names for
edge density.
* New: In CRL Core, in PyCellGauge, add the missing methods.
* Bug: In Isobar, PyOccurrence_create(), the HTRY/HCATCH block was not
enclosing the constructor of Occurrence, which can throw exceptions.
When an exception was thown the Python interpreter just terminate
with the cryptic message:
"Fatal Python error: Py_EndInterpreter: thread still has a frame"
Reminder to myself: when such a message occurs, it means that the
interpreter did encounter a problem, but it's related to the isobar
interface.
Placement management:
* Change: In <metis>, always disable the hMetis support regardless of
it being detected or not as the placer is still unable manage the
final bin contents.
Routing gauge management:
* Bug: In CRL Core, <vsclib/alliance.conf>, set the correct pitches and
size for the routing layers and the cell gauge.
* Change: In Katabatic & Kite, extract the correct extension cap for each
routing layer from the layers characteristics (cache then in
Katabatic::Configuration).
* Change: In Katabatic, <AutoSegment>, create segment with the wire width
defined in the gauge. For AutoSegment created on already existing
Segment from the global routing, adjust the width.
* Change: In Katabatic, <AutoSegment>, more accurate information about how
a segment is connected to terminal via source and/or target.
The flag SegStrongTerminal is splitted into SegSourceTerminal and
SegSourceTarget (but still used as a mask). So now we can know by
which end an AutoSegment is connected to a terminal.
* Change: In Katabatic, ::doRp_Access(), create constraint freeing segments
not only when HSmall but also when VSmall (more critical for <vsclib>).
Otherwise we may see AutoSegments with incompatible source/target
constraints.
* Change: In Kite, BuildPowerRails, do not create blockage on PinOnly
layers *but* still create power rails planes. This is a temporary
workaround for <vsclib> where the METAL1 blockages overlaps the
terminals (it was fine for Nero, but they shouldn't for Kite).
* Change: In Kite, <RoutingEvent>, if a TrackSegment is overconstrained,
directly bybass it's slackening state to DataNegociate::Slacken.
Also rename the flag "_canHandleConstraints" to "_overConstrained",
seems clearer to me.
Miscellaneous:
* Change: In CRL Core, <Utilities>, add a "pass-though" capability on the
mstream to temporarily make them print everything.
In CRL Core configuration files, "display.conf", "patterns.conf" and
"technology.conf" share most of their code. So that common part is put
into "common/" and sourced from the final configuration file.
Update the documentation according the the new initialization scheme.
In CRL Core, the layout of the files under "/coriolis2/etc" changes.
Instead of having them directly under "etc", they are now replicated,
in subdirectories. Each subdirectory having the name of the associated
symbolic or real technology (they are kept separated). We have, for
now:
* etc/cmos/ : symbolic, the Alliance original one.
* etc/vsc200/ : symbolic, for G. Petley vsclib.
* etc/hcmos9/ : real, generic fake (130nm).
To tell which pair (symbolic,real) technologies must be used we create
a *second* (sigh) configuration file "coriolis2_techno.conf", and it's
hidden counterpart in the user's account, to set it up. It needs to be
separate because it is read as early as possible and select which set
of configuration files would be read.
Also add support up to METAL8 and POLY2 in CRL core and it's Alliance
parser/drivers.
In Katabatic & Kite, remove all hard-coded values related to track pitches.
* New: In <Session>, add more convenience function to access RoutingGauge
characteristics.
* New: In <AutoSegment>, <AutoContact>, add support for the "depth spin",
that is, if the source/target contacts are going "top" or "down".
Used to compute the perpandicular pitch. Need a small modification
of the revalidation mechanism. The observers of <AutoSegment> are
notified when the spin changes.
* New: In <AutoSegment>, the getPPitch() method allow to compute the
"perpandicular pitch". For now it is simply the greatest from the
source perpandicular pitch and the target perpandicular pitch.
Make uses of the "depth spin".
* New: In <TrackElement>, <TrackSegment>, cache the perpandicular pitch.
Updated through the notification from the observable.
When upgrading from doxygen 1.5.x to 1.8.5 the way the documentation
is generated has underwent many changes, particularly in the headers.
* Change: In <header.html>, must include the javascripts <jquery.js>
and <dynsections.js>.
* In <CMakeLists.txt>, as the header is customized, doxygen seems not
copy some files like the javascripts and some images (open.png,
closed.png). So we copy them from doxygen installation and make
the CMakeLists.txt install them. I hope they will not change too
much in the future.
* In <doxyfile>, disable markdown support as it do not interpret
correctly the formating we already adopted (with a left margin
to put command into). Use HTML_EXTRA_STYLESHEET instead of
HTML_STYLESHEET. Enable the index (DISABLE_INDEX=NO), for the
top header. Enable dot for inheritance diagram. Set the
EXAMPLE_PATH=. to include the synthetic hierarchy.
Correct the tag inclusion (faulty path in some places).
* In <SoC.css>, create style for the new header generated by doxygen.
* In the documentation, move the synthetic hierarchy into a module.
Miscellaneous:
* Change: In <crlcore>, in display.conf use the same display threshold
for both METAL2 & METAL3.
In alliance.conf, the side of VIAs in the gauge is 2l (not 3l).
In kite.conf, separate edge densities for H/V.
* Change: In <Cell>, in flattenNets() use flag as argument, not a
boolean. Do not create rings for clock or supply nets.
* Change: In <DeepNet>, in _createRoutingPads() do not create rings
for clock or supply net (duplicated policy as in Cell::flattenNets()).
* Bug: In <ControllerWidget>, at last find the bad signal disconnect
that was causing ungraceful messages.
* Change: In <knik>, in Edge display occupancy/capacity in the string
name. Improved display progress and debugging capabilities.
Improved exception catch & breakpoint managment:
* Bug: In <PaletteWidget>, in updateExtensions() replace the calls to
deleteLayer() by delete. This cause the widget to be immediatly
erased instead of waiting for the event queue to be completly
processed. This was causing the widget to be left in a incoherent
state when stoping at a breakpoint.
* Bug: In <BreakpointWidget>, in execNoModal(), flush the main event
loop (QApplication::flush()) *before* lauching the *local* event
loop. This is to ensure all widgets are in their final state when
waiting (especially <PaletteWidget>).
* Change: In <ExceptionWidget>, new method catchAllWrapper() to
execute any std::function< void() > function/method with a "try"/
"catch" wraparound and lauch the widget in case something is catch.
* New: In <hurricane>, support for a oberver pattern, backported from
<katabatic> with an Obervable capable of being linked to any
number of Obervers.
* New: In <Cell>, made it observable to detect Cell change, currently
emit two kind of signals:
- Cell::CellAboutToChange : *before* any change.
- Cell::CellChanged : *after* the change has been completed.
* New: In <UpdateSession>, in Go::invalidate() add the Cell owning the
Go to the UPDATOR_STACK (of course the cell is added only once).
In addition, when the Cell is added, send a notification of
Cell::CellAboutToChange to all it's observers. The slave instances
are also invalidated.
Conversely in UpdateSession::_preDestroy() for each invalidated
Cell send a Cell::CellChanged notification to all observer.
The UPDATOR_STACK has been slightly amended to accept Cell which
are not Gos. Prior to this, the Cell where completly excluded from
the UpdateSession mechanism, so it's instances where never actualised
of anything referring to the Cell for that matter.
Note: we use two different mechanisms to transmit a Cell change,
observers and the slave instance map. I think at some point it
should be unificated.
* Change: In <CellViewer>, make it a Cell observer to redraw when the
cell is modificated (also update the palette).
Uses the catchAllWrapper() to protect all critical actions.
* Change: In <GraphicTool>, no longer need of cellPreModificated and
cellPostModificated signals. Now done through the Cell obersvers.
* Change: In <mauka>, <etesian> & <kite> now uses the catchAllWrapper
method for protection (need to split methods in two, to be able
to pass it as argument). No longer emit cellPreModificated and
cellPostModificated.
Support for RoutingGauge in P&R:
* Bug: In <placeandroute.py>, the connection from the internal power
ring to the connectors was not done correctly. Wrong contact layers
leading to a gap.
* Change: In <BuildPowerRails>, detection of the corona signals based
on how the "pck_px" pad is connected. No longer based on name
matching.
* Change: In <placeandroute.py>, support for 2 routing metal only
(3 metal in the technology).
* Change: In <katabatic> & <kite> support for a "top layer" limitation
on the routing gauge, this allows to use only two routing metals
(METAL2 & METAL3). Work in progress.
Cleanup:
* Cleanup: In <vlsisapd/src/bookshelf>, remove unused file Bookshelf.cpp
(may have been a parser once upon a time).
* Cleanup: In <hurricane>, in Cell::flattenNets() use flags instead of
booleans to be more readable. Allow occurrence placement checking.
* New: In <crlcore> add Python wrapper for the Ispd05 loader.
* New: In <unicorn> add option for direct loading of ISPD05 designs.
* Bug: In <hurricane/src/viewer>, RecordModel must emit
layoutAboutToBeChanged() before changing the record contents (and
layoutChanged() afterwards).
Details:
* New: In <vlsispad/utilities>, new objet Dots for displaying a kind
of progress bar.
* Change: In <vlsisapd/bookshelf>, keywords are now case-insensitive.
Added a "strict syntax" option (to be disabled for ISPD05).
* New: First working implementation of Etesian, at least for ISPD05
"bigblue1".
* Change: In <hurricane>, in Cell::flattenNets(), no longer display
a warning if an instance is unplaced, this does not make sense
when the circuit is not placed.
* New: In <crlcore>, Added translator for ISPD05 bookshelf, the
circuit is *not* placed, unlike in ISPD04 and terminal nodes
*are* true cells.
* New: In <unicorn>, added entry in import cell for ISPD05 benchmarks.
Update to Qt 5:
* Change: Now requires at least cmake 2.8.9.
* Change: CMakeLists.txt needs small changes. Qt modules must be found
one by one (Core, Gui, Widgets). Must add "set(CMAKE_AUTOMOC ON)"
in the top file and replace "qt4" prefix in macros by "qt5".
Added simpler macro "setup_qt()" in FindBootstrap.cmake.
* Change: No longer need to include <QGtkStyle> is is choosen by default
according to the current desktop environment.
* Change: In <hurricane>, In HApplication, launch ExceptionWidget when
a std::exception is catched instead of silently discarting it.
New placer Tool: Etesian
* New: <etesian> analytical placer. Encapsulate Coloquinte from
Gabriel Gouvine.
* New: in <documentation>, add stub demonstration ToolEngine <smurf>.
Needs to be commented.
Miscellaneous:
* New: in <boostrap> and <unicorn>, added support for Etesian, the new
analytic placer. The tool itself will be added in the next commit.
* Bug: in <CellWidget>, when shifting the display buffer, we no longer
can copy the buffer on itself (we should never have). Now go through
a temporary one (PlaneId::AutoCopy) which is added to the
DrawingPlanes. Affect "goLeft()" and "goUp()".
* Bug: In <CellWidget>, remove the WA_PaintOnScreen flag/attribute.
When it's on, no PaintEvent is transmitted to the CellWidget
when it's the central widget of the <CellViewer> (QMainWindow).
It's something I still don't understand from the doc of Qt.
* Change: In <AreaCommand>, use the PlaneId enumeration instead of a
anonymous numerical index.
* Change: In <HApplication>, no longer catch and silently discard
standartd exceptions but launch the ExceptionWidget...
Suppress the now deprecated constructor with "Type" argument.
* Change: In <SelectionModel>, the "reset()" method is deprecated in
Qt5, instead enclose the "clear()" by a "beginResetModel()" and
"endResetModel()" pair.
* New: In <crlcore>, add support for ISPD05 benchmarks (in Bookshelf
format). Forked from ISPD04 and not finished yet.
* Change: In <Mauka>, distinguish the Action string identifier from
<Etesian>
* New: In <unicorn>, add entry for ISPD05 loader. Add entry for
<Etesian> analytic placer.
Details:
* New: in <bootstrap>: add support for devtoolset-2 in ccb. Run the
cmake commands through 'scl', set shell environment variables
BOOST_INCLUDEDIR & BOOST_LIBRARYDIR and disable the default
system path search.
* Change: In various flex scanners add the %nounput to suppress
compiler warnings.
* Change: Little cleanup for g++ 4.8.1 as it's more strict.
* Change: In various top CMakeLists.txt, suppress extraneous '/'
after DESTDIR.
Documentation restructuration:
* Bug: in <hurricane>: bad figure for transf-R1.
* Change, in <kite>: Remove deprecated configuration variables.
* New: documentation <tool> to regroup all documentation not directly
related to one tool.
* Change, in <crlcore>, move the user's guide and the top doc index
into <documentation>.
* New, in <documenation>: added Python script demo based on AM2901.
Project hierarchy reorganisation:
* With svn, we were doing a tool by tool checkout, suppressing the
whole repository hierarchy level.
* The tools were also grouped, inside one repository, into multiple
projects (<bootstrap>, <vlsisapd>, <coriolis>).
* We do not want to split up each tool into a separate repository,
given their tight integration (except for vlsisapd).
* We choose to simplify, and consider all tools in a svn repository
one project. Due to the way Git clone repositories, the directory
containing the project is now to be seen under "src/".
CMake modifications:
* Now that the <vlsisapd> and <bootstrap> projects are merged into
coriolis, modificate the top CMakeLists.txt of each tool to uses
only Coriolis (and bootstrap hard wired).
CCB compile script modifications:
* Uses the new source tree hierarchy, with the project directory
inserted.
* Remove (comment) all parts relateds to svn managment.
* Git is sufficiently simple so that we do not want to integrate
command shortcut into the script.
SVN cleanup:
* Remove the obsolete <chamsin> tool, that has become the full fledged
<chams> project long time ago.
- Change: In Cell, added doc about PlacementStatus.
- Change: In Transformation, more detailed explanations about the
orientations. A little beautifying too...
- Change: RoutingPad doc update.
- Change: Entity doc update (for id).
- Change: In HTML header/footer uses the new SoC.css.
* ./crlcore/src:
- Change: In DefDriver, added support for placement exportation.
- New: In Utility, added a "paranoid" output stream (for my extra
warnings in the router).
- Bug: In ApParser, correct parsing of connectors index (recreate
the vector).
- Change: In alliance.conf, make "blockageNet" case insensitive.
- Change: In misc.conf, added support for paranoid stream.
- Change: In x2y and CyclopMain correct verbose flags positionning.
* ./crlcore/doc:
- Change: Updated style and added some documenation.
- New: In Environment, adds a method getLIBRARYPath() to directly access the
path of an element in the SearchPath. Also added to the Python interface.
This is a quick alternative to fully export SearchPath and it's element
into the Python interface.
- Bug: In AgdsQuery::goCallBack(), take account the instance transformation.
This problem was not showing until now because there wasn't any instances...
- Bug: In CMakeLists.txt, when our custom macro "setup_boost()" is used,
do not call find_package() afterward, it corrupt the library pathes
from '/usr/lib/' to '/usr/lib/lib/'.
- Bug: In Histogram::addSample(), reject the sample if iset is superior
OR EQUAL to the sets size...
- Change: In etc/mauka.conf, sets "mauka.standardAnnealing" to True. Otherwise,
when hMetis (4-part) is not used, this leads toward very poor placements.
- New: In UsersGuide, add a third style variant for the soc-extras site.
- New: Added FreeBSD/Ubuntu patches from Otacilio De Araujo
(<otaciliodearaujo@gmail.com>).
* ./crlcore:
- New: In Utilities, cbug stream to separate all the scary messages
from Kite/Katabatic and maybe others.
- New: In stratus1.conf, adds default settings previously in st_config.
- New: Moves Python configuration helpers from under /etc/coriolis2
into PYTHON_SITE_PACKAGES/crlcore. Adapt Utilities so coriolisInit.py
is now searched in that directory. This way only true configuration
files remains under /etc/coriolis2
- Change: In helpers/__init__.py, do not try to guess the sysConfDir
when not run through coriolisInit.py. This is done by exploring the
call stack with traceback.
- Change: In ApDriver, when a physical view is driven, update the flag
in the catalog state telling that this view is present. This is far
from satisfactory as this flag should be set as soon as any physical
component is created.
- A complete sweep of cleanup to suppress allmost all compiler warnings.
* ./crlcore:
- New: Extented Python support for all objects needed to configure Coriolis.
- New: Configuration files and load helpers completly written in Python.
An XML emulation mode is still avalaible.
- New: UsersGuide, as a replacement for README, written in ReST.
- New: Start of Doxygen documentation (mostly for documenting the initialisation
objects & methods).
- Bug: In ApParser.cpp, the connectors where not parsed. The problem
was not showing if you run all Stratus scripts in the same process
as the caching mechanism will prevent the parsing of the disk file
and uses the memory copy (which is correct).
- Change: For the setup_sysconfdir() boostrap/cmake macro uses the
CMAKE_INSTALL_PREFIX to guess where we are being installed.
Should be more reliable than any *_TOP environment variable.
Jean-Paul Chaput
Roselyne Chotin-Avot
Gabriel Gouvine
Damien Dupuis