issue with this is that the core debug support uses this
mechanism, then trashes its state over reset. Users can
Work around that (for now) by re-assigning the desired
config after reset.
Also fixes "target halted due to target-not-halted" goof.
When we can't describe the reason using OpenOCD's limited
vocabulary, say "reason undefined" instead of saying it's
not halted.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2588 b42882b7-edfa-0310-969c-e2dbd0fdcd60
arrays (error prone) or assume all registers are 32-bits wide (they can
have fewer bits); don't use spaces in register names, so they can be
passed more easily to the "reg" command.
Minor updates for ARM9 vector_catch support: it's an 8-bit value. This
seems to help this core's vector_catch command work a bit better; but its
behavior wih the register cache is still goofy.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2587 b42882b7-edfa-0310-969c-e2dbd0fdcd60
display them as 32 bits unless that's their true size.
(Removes some confusion.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2586 b42882b7-edfa-0310-969c-e2dbd0fdcd60
OpenOCD was able to access only to chips attached to first EMIF
chipselect. This patch fixes chipselect management code and allows
OpenOCD to access to NAND devices attached to any EMIF CS line.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2585 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Add flash programming support for NXP LPC1700 cortex_m3 based family
git-svn-id: svn://svn.berlios.de/openocd/trunk@2579 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Warn about anyone using "jtag_speed" commands; that command is obsolete, and will someday be removed.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2578 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- revert patch from rev1507 as it was causing reset issues with arm9 cores
git-svn-id: svn://svn.berlios.de/openocd/trunk@2574 b42882b7-edfa-0310-969c-e2dbd0fdcd60
A5.3.11 Data processing (shifted register)
The usual kinds of problems; the most noteworthy were that
the "S"et flags bit was mis-handled in these instructions.
---
This is the last patch from a quickie set of tests covering all
encodings of the instructions with 32-bit opcodes. There may
be some corner cases left, plus the instructions that aren't
yet handled, but the Thumb2 disassembler is no longer just
"lightly" tested with GCC output ... the new code paths have
mostly been verified.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2568 b42882b7-edfa-0310-969c-e2dbd0fdcd60
A5.3.5 Load/store multiple
A5.3.7 Load word
There was a longstanding bug in Thumb-1 LDM; the rest of the LDM/STM
fixes are just using width specs to match UAL syntax, except for two
opcode name typos. Load word had two bitmask goofs.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2567 b42882b7-edfa-0310-969c-e2dbd0fdcd60
A5.3.8 Load halfword, unallocated memory hints
It's mostly the usual sort of bitmasking goofage and getting the
width specs right. In one case an older x86 GCC generated bad code
unless I structred a conditional differently (sigh).
git-svn-id: svn://svn.berlios.de/openocd/trunk@2566 b42882b7-edfa-0310-969c-e2dbd0fdcd60
A5.3.5 Load/store multiple
A5.3.7 Load word
There was a longstanding bug in Thumb-1 LDM; the rest of the LDM/STM
fixes are just using width specs to match UAL syntax, except for two
opcode name typos. Load word had two bitmask goofs.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2565 b42882b7-edfa-0310-969c-e2dbd0fdcd60
ARMv7-M arch manual:
A5.3.1 Data processing (modified immediate)
A5.3.3 Data processing (plain binary immediate)
A5.3.4 Branches and miscellaneous control
and other (immediate) encodings referenced there. Several of
these just tweak the new syntax ("Unified" ARM/Thumb: UAL) but
there were a few bugs too.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2564 b42882b7-edfa-0310-969c-e2dbd0fdcd60
with testcases covering several new encodings in these sections
of the ARMv7-M arch manual:
A5.3.12 Data processing (register)
A5.3.13 Miscellaneous operations
A5.3.14 Multiply, and multiply accumulate
A5.3.15 Long multiply, long multiply accumulate, and divide
The issues were mostly in '12 and '13; some new related 16-bit
opcodes had issues too.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2563 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Dump SP on poll, and show whether it's MSP or PSP.
Thread mode can use either stack pointer, so this is
part of the state that's not yet displayed.
Shrink some lines.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2555 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Clean up treatment of registers in ARMv7-M and Cortex-M3.
- At the arch level:
* Just list registers and names; don't impose core-specific
policy about how they are accessed.
* Each register has a symbol.
* Remove the register mode field (irrelevant to debugger)
- At the core/implementation level:
* Just map the registers to their relevant access methods;
don't require the arch level to say how that should work
(cores other than Cortex-M3 could do it differently).
* Don't use undefined bits from register 20.
* Use register IDs that are part of the ARMv7-M interface.
In short, there's now a real distinction between the arch
and core layers.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2554 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Minor updates to the Thumb2 disassembly:
- Bugfixes:
* Distinguish branch from misc via "!=" not "=="
* MRS register shift is 8 bits (vs MSR being 16)
- Format tweaks:
* CPS needed tab (not space)
* add commma before some shifts
* add space after comma in LDM/STM
* use ".W" width spec on various instructions
git-svn-id: svn://svn.berlios.de/openocd/trunk@2553 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Revert parts of the previous ARMv7-M register patch.
It turns out that part of the issue is a documentation
problem for the Cortex-M3 r1 parts. So for the rest,
simpler fixes are possible (in followup patch).
git-svn-id: svn://svn.berlios.de/openocd/trunk@2552 b42882b7-edfa-0310-969c-e2dbd0fdcd60
- fix issue when multiple flash chips are connected, eg. x16 x 2 on 32bit mcu bus
git-svn-id: svn://svn.berlios.de/openocd/trunk@2551 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Move the dap command handler implementations to arm_adi_v5.c,
leaving just thin wrappers in armv7m.c. There should be no
change in functionality here. (From Magnus.)
Minor style cleanup: whitespace, line length, etc. Update spec
references to use docs which are currently available. (From Dave.)
git-svn-id: svn://svn.berlios.de/openocd/trunk@2544 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Some cleanup of the ARMv7-M support:
- Reference the relevant ARMv7-M ARM doc (DDI 0405C to non-Vendors), and
update the Cortex-M3 doc refs (DDI 0337C is no longer available).
- Those registers aren't actually general, and some are incorrect (per all
public docs anyway). Update comments and code accordingly.
* What the Core Debug facility exposes is *implementation-specific*
not architectural. These values aren't fully portable. They match
Cortex-M3 ... so no current implementation will make trouble, but
the next v7m implementation might.
* Four of the registers are actually not exposed that way. Before
Cortex-M3 r2p0 they are read/written through MRS/MSR instructions.
In that newest silicon, they are four bytes in one register, not
four separate registers.
- Update the CM3 code to report when that one register is available,
and not try to access it when it isn't. Also declare the register
numbers that an eventual MRS/MSR solution will need to be using.
- Stop line wrapping the exception labels.
So for parts before r2p0 OpenOCD behavior is effectively unchanged, and
still buggy; but for those newer parts a few things might now be correct.
Most current Cortex-M3 parts use r1p1 (or earlier); this seems to include
most LM3S parts and all STM32 parts. Parts using r2p0 are available, and
include fourth generation LM3S parts ("Tempest") plus AT91SAM3 and LPC17xx
parts which are now sampling.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2543 b42882b7-edfa-0310-969c-e2dbd0fdcd60
More instructions decoded:
A5.3.5 Load/store multiple
The preferred PUSH/POP syntax is shown when appropriate.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2539 b42882b7-edfa-0310-969c-e2dbd0fdcd60
oharboe
ntfreak
zwelch