During the ./configure build stage, error './configure.gnu: line 1: -e:
command not found' can occur.
Problem: the -e flag with echo is not portable. While some shells support
it (e.g., Bash), others (e.g., POSIX /bin/sh on some systems) do not.
Solution: replacing echo -e with printf, since printf is POSIX-compliant
and works consistently across different shells.
Change-Id: I9efbba662599a61bbe1fc56a33dc1ee7ad58826c
Signed-off-by: Pete Moore <pmoore@mozilla.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8653
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
https://review.openocd.org/c/openocd/+/8439 changed variable `words`
from uint8_t to unsigned int in sfdp.c but failed to update the
LOG_DEBUG line to reflect the new type. On macOS this caused:
src/flash/nor/sfdp.c:107:28: error: format specifies type 'unsigned
char' but the argument has type 'unsigned int' [-Werror,-Wformat]
The formatting of the debug line has been updated to reflect the updated
type.
Change-Id: Ifc7ddb1279ab2603901c969d9c09af847f3a3caf
Signed-off-by: Pete Moore <pmoore@mozilla.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8660
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add maskisr command support to Xtensa NX targets allowing masking
of interrupts during single stepping.
Change-Id: I3835479de8015f1a2842afd1aeab24829e385031
Signed-off-by: Henrik Mau <henrik.mau@analog.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8575
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Use LOG_TARGET_xxx() for the remaining log messages.
Change-Id: If52e3935b57e4c39212ce6b5111ff65159de1373
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8580
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use LOG_TARGET_xxx() for the remaining log messages.
Change-Id: I4b86b206d17dead0662388e827204b40a7d29edd
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8579
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Remove the prefix since it is redundant. While at it, also
get rid of the useless exclamation mark.
Change-Id: I8707342c602cea735c5a423b37ebe40a3aafb137
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8578
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Remove the prefix since it is redundant.
Change-Id: I9c23c0479ba40be24e471309e720060cd03763ee
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8577
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Catch an invalid option like "--enable-buspirate=rubbish".
Also mention all valid values in the help text for those options.
Change-Id: Ib0fb8904132d07cc5cde421aa816ca6971a08769
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8540
Reviewed-by: R. Diez <rdiez-2006@rd10.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
List AC_ARG_ADAPTERS was missing a comma separating two of the elements.
Also verify that each adapter is set to either 'auto', 'yes' or 'no',
which should prevent such issues from going unnoticed in the future.
Change-Id: I0d407e03b1e5a3edc61d7dc93d5ffa70fe079b3c
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8534
Tested-by: jenkins
Reviewed-by: R. Diez <rdiez-2006@rd10.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Also convert the Bus Pirate to the common PROCESS_ADAPTERS logic.
Change-Id: Ifa8ebcee380c16d7e308ba7a75dbffdb74208285
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8533
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: R. Diez <rdiez-2006@rd10.de>
Tested-by: jenkins
The stlink driver, both in dapdirect and in HLA modes, pretends to
store locally the value of the adapter speed in order to use it
later-on during adapter initialization.
It doesn't work in dapdirect mode since the code to store locally
the value will not be executed until the adapter is already fully
initialized.
This cause an issue in dapdirect mode:
- due to the local value, still kept at -1, the adapter will be
initialized to the lowest clock speed (5 KHz on stlink v2 in SWD
mode);
- after the adapter initialization the framework will again set
the speed with the value requested by the user.
Some target, like nRF51822, only accepts JTAG/SWD speed in a
defined range of frequencies. The initial speed of 5 KHz used by
dapdirect can be out of range, making the target debug port not
working.
The adapter framework already stores the value of speed and makes
it available through adapter_get_speed_khz().
Drop struct hl_interface_param::initial_interface_speed.
Let the code to use adapter_get_speed_khz().
Change-Id: Ie11bf0234574f2a9180d3d3a16efb78e08dfcd86
Reported-by: Andrzej Sierżęga <asier70@gmail.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8574
Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
Tested-by: jenkins
Change the variable name to 'is_configure' to be compatible with the
coding style and use 'bool' as data type.
Change-Id: I8609f9807c8bd14eaf6c93acf63fd51b55c9bbbb
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8573
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The functions:
- semihosting_opcode_to_str();
- semihosting_write_fields();
- semihosting_set_field();
are not referenced outside the file.
Make them static.
Change-Id: Ia8d35554673145fdfe0e501543eb18919863039f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8551
Tested-by: jenkins
The function esirisc_jtag_get_eid() is not used outside the file.
Make it static.
The function esirisc_jtag_disable_debug() is never used.
Make it static and mark it as unused.
Change-Id: I5c99cbf77cc9c527b6e18a3f67caa24f8551d09c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8550
Tested-by: jenkins
The function is not used.
Drop it!
Change-Id: I1625e03714b5a842f668098191c39cce34f815e8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8549
Tested-by: jenkins
The function is not referenced outside the file.
Make it static.
Change-Id: Ic2552c040b6b46c0334851a4fc0fdaa400e11e4c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8548
Tested-by: jenkins
The function is not referenced outside the file.
Make it static.
Change-Id: Ifeccc5e38f3da4b4111422860bc1c1447d00f7fe
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8547
Tested-by: jenkins
The function is not referenced outside the file.
Make it static.
Change-Id: I5f2a2c70085b9158df8806432bb9ed09bb256ab5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8546
Tested-by: jenkins
The function is not used.
Drop it!
Change-Id: I176c9d6ba077e36b762c14f9b877d5152992763c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8545
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
The functions:
- mpsse_divide_by_5_config();
- mpsse_purge();
- mpsse_rtck_config();
- mpsse_set_divisor();
are not referenced outside the file.
Make them static.
Change-Id: Id6930183a3ce26693b2113f622046168ba289df8
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8544
Tested-by: jenkins
The functions:
- interface_jtag_add_callback();
- interface_jtag_add_callback4();
are not referenced outside the file.
Make them static.
Change-Id: I84f738309d23c8d0b5329aa04436db750cf185e5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8543
Tested-by: jenkins
The functions:
- jtag_error_clear();
- jtag_tap_count();
are not referenced outside the file.
Make them static.
Change-Id: I00fcf06b1838b9f6c955c19772f1d41d486459e9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8542
Tested-by: jenkins
The function is not referenced outside the file.
Make it static.
Change-Id: I72e96624749ae4cc7f4566d737a88186e899616a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8541
Tested-by: jenkins
With the drop of the code for the probe zy1000 [1] and then the
drop of minidriver code [2], there are no more auto-generated
source files.
Remove them from the list of generated files to be ignored.
Change-Id: Iee65e21528674ea4cc94018e52126f882da4f07c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
[1] b0fe92dba7 ("zy1000: drop the code, deprecated in v0.10.0")
[2] 25218e8935 ("jtag: remove minidriver code and minidriver-dummy")
Reviewed-on: https://review.openocd.org/c/openocd/+/8522
Tested-by: jenkins
Checkpatch rejects patches that have empty commit description and
logs them with:
WARNING:COMMIT_MESSAGE: Missing commit description - Add an appropriate one
But if the patch has a gerrit's Change-Id line placed before the
line Signed-off-by, then checkpatch considers the Change-Id line
as a valid commit description text.
Use the Change-Id tag as a marker of the end of the commit message,
thus not counting its line as part of the commit description.
This patch is not relevant for the Linux kernel development process
as gerrit is not involved and the Change-Id tag is rejected. But
other projects, like OpenOCD, base the development on gerrit and
reuse kernel's checkpatch with flag '--ignore GERRIT_CHANGE_ID'.
This patch has been refused [1] in Linux upstream because it has
not been considered relevant for that project.
Let's take it as another add-on in OpenOCD checkpatch.
Change-Id: I3b55b8fffa07ce67177c108e7c9554ca46674246
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Link: [1] https://lore.kernel.org/lkml/20230410100255.16755-1-borneo.antonio@gmail.com/
Reviewed-on: https://review.openocd.org/c/openocd/+/8539
Tested-by: jenkins
git log is faster than git2cl and the result has a better format.
Change-Id: I465ca62e3e30fed230fe9661e82a987980c05459
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8531
Tested-by: jenkins
Reviewed-by: R. Diez <rdiez-2006@rd10.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Add support for code coverage collection. This helps
developers to check if their test scenarios really exercised
all the OpenOCD functionality that they intended to test.
- Option --enable-gcov has been added to configure.ac
which enables the coverage collection using Gcov. (Disabled
by default.)
- The steps to collect and inspect the coverage have been
described in HACKING file.
Change-Id: I259e401937a255e7ad7f155359a0b7787e4d0752
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8521
Tested-by: jenkins
Reviewed-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
There was a conflict:
1. commit 2cd8ebf44d ("breakpoints: use 64-bit type for watchpoint mask
and value")
2. commit 0bf3373e80 ("target/breakpoints: Use 'unsigned int' for
length")
The second commit was created erlier, but merged later so the types of
`mask` and `value` became `uint32_t` in `watchpoint_add_internal()`.
This created a bug:
`WATCHPOINT_IGNORE_DATA_VALUE_MASK` is defined as `(~(uint64_t)0)`.
Truncation to uint32_t makes it so the comparisons with the constant
don't work.
Change-Id: I19c414c351f52aff72a60330d83c29db7bbca375
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8500
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Reviewed-by: Karl Palsson <karlp@tweak.au>
In previous implementation, it was known that it does not perform
full reset, and that some peripherals, such as GLB core,
which handles among other stuff GPIOs, was not reset.
It was presumed, that full reset by software is not possible,
although, by accident, even when comment says that
CTRL_PWRON_RESET is set to 1, it is not
(value written into 0x40000018 supposed to be 0x7, not 0x6).
CTRL_PWRON_RESET indeed triggers full "power-on like" reset,
so this method is implemented in this commit.
There are some workarounds to make reset seamless, without any
error messages, which are described in comments of TCL script.
Only down-side of this reset is, that chip is halted after reset
bit later in BootROM than previous implementation,
but it's still good.
Change-Id: Ife2cdcc6a2d96a2e24039bfec149705baf046318
Signed-off-by: Marek Kraus <gamelaster@outlook.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8529
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Rename file to get it more generic and add more targets belonging
to the same family.
Add support for two new devices: RZ/V2L and RZ/G3S
Change-Id: Idb7f4d81d2f95ad15ef686e940f43ed29f49f343
Signed-off-by: MicBiso <michele.bisogno.ct@renesas.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8211
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Apply some coding style changes according to the C style guide. The
patch is tested for regression with the 'wiggler' parallel port cable.
Change-Id: I43774f596831d8c46f90f18893418178041a930b
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8516
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Provide cable specific configuration files like for the FTDI interface.
Depcrecate the old configuration files but keep them until the next
release for compatibility reasons.
Change-Id: I436bd60779a107120c9e1b1f0b8a69a39a240ad4
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8514
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Change-Id: Ib0cbd9388d61659f8d47c8f57c09baa6df123487
Signed-off-by: Mark Zhuang <mark.zhuang@spacemit.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8369
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The STLink API that supports dap-direct is available from STLink
firmware v2j24, published in early 2015.
We can reasonably expect that any old STLink still in use today
has got at least one firmware update during the last 10 years.
Most of the board files in upstream OpenOCD still use the STLink
in HLA mode. This limits the test coverage of the dap-direct code,
which was introduced in OpenOCD v0.11.0.
- Rename interface/stlink.cfg as interface/stlink-hla.cfg to still
provide support for HLA, adding a deprecated message.
- Rename interface/stlink-dap.cfg as interface/stlink.cfg to make
dap-direct the default trasport.
- Add a redirect file interface/stlink-dap.cfg for users that have
out-of-tree custom board files.
- Update all the board files to the new setup.
- Remove STLink HLA mentions from the documentation, while adding
a reference to interface/stlink-hla.cfg
Checkpatch-ignore: LONG_LINE
Change-Id: I99366bb03cd3b83f8f408514e657f30e59813063
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8523
Tested-by: jenkins
Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
In multi-target SoC not all the targets are running simultaneously
and some target could be powered off or kept under reset.
Commit 4892e32294 ("target/cortex_m: allow poll quickly get out
of TARGET_RESET state") does not considers the case of a target
that is kept in reset and expects the target to change state from
TARGET_RESET immediately.
This causes OpenOCD to log continuously:
Info : [stm32mp15x.cm4] external reset detected
Info : [stm32mp15x.cm4] external reset detected
Info : [stm32mp15x.cm4] external reset detected
Read again dhcsr to detect the 'stable' reset status and quit,
waiting for next poll to re-check the target's status.
Change-Id: Ic66029b988404a1599bb99bc66d4a8845b8b02c6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 4892e32294 ("target/cortex_m: allow poll quickly get out of TARGET_RESET state")
Reviewed-on: https://review.openocd.org/c/openocd/+/8399
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Adapter Xilinx XVC/PCIe was not appearing in the configuration summary
because of the wrong variable name: build_xlnx_pcie_xvc
instead of enable_xlnx_pcie_xvc.
Also build this adapter automatically on Linux.
Change-Id: I69ea92f550052b9ce55ce32597ac446a15a87388
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8312
Tested-by: jenkins
Reviewed-by: R. Diez <rdiez-2006@rd10.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
On several packet-handling functions, add "const" to arguments
that represent read-only packet buffers.
For instance on GCC 13.2.0, this code:
const char *some_packet = "...";
gdb_put_packet(conn, some_packet, strlen(some_packet));
would prior to the fix produce warning:
passing argument 2 of ‘gdb_put_packet’ discards ‘const’
qualifier from pointer target type [-Wdiscarded-qualifiers]
Change-Id: Idb62f57d37ed323c39de38982e57afdd3882e280
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8517
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
To help the developers who use Visual Studio Code IDE,
ignore the ".vscode" folder in Git. This folder contains
local configuration of the VSCode workspace.
Change-Id: I1d54d8ce2bd0680f2fa1fb773bb33c786bdcc608
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8518
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Change the prototype of riscv_batch_get_dmi_read_op().
Now that 'target->smp' is unsigned, drop the cast.
Change-Id: I2a54268ed1e4bf0ea884b62cceb73f5c7451da78
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8484
Tested-by: jenkins
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Fix only minor additional checkpatch issue (spacing and line
length).
Change-Id: I11f10eddadc21e051c96eb3d4d4c0554a2cddd15
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8483
Tested-by: jenkins
The firmware in contrib folder use Makefile for the build.
Force checkpatch to check these Makefile for the SPDX.
Change-Id: I815bf6df636c96a15f82c3d8a9de0c4f219303d2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8520
Tested-by: jenkins
Zero is not a power of two.
All functions that use IS_PWR_OF_2 were checked and the edge case
of IS_PWR_OF_2(0) does not occur anywhere at the moment. Therefore
the fix is safe.
Change-Id: I84d9f9c64c9a7df452ca6e99c2ee4169ccb2b0be
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Fixes: 9544cd653d ("helper: add align.h")
Reviewed-on: https://review.openocd.org/c/openocd/+/8511
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
New version tagged on 2024-08-28.
Change-Id: Id0cf82a692469ccf794c9680c5d5ac09ea26e6da
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8513
Tested-by: jenkins
Pete Moore
Henrik Mau
Marc Schink
R. Diez
Antonio Borneo
Jan Matyas
Evgeniy Naydanov
Marek Kraus
Mark Zhuang
MicBiso
Florian Fainelli