hide_csrs should not emit warnings on an attempt to hide non-exitents CSR.
hide_csrs funcitonality is intended to be used for scenarios when we don`t
want certain groups of registers to be available in GDB. Typically this is
needed to simplify integration with various IDE. In such scenarious it may
be impractical/unfeseable to figure out which register is present on a
target. So reporting a situation when a user wants to hide a non-existent
register creates way too much noise. This commit reduces severity of
relevant debug message to LOG_TARGET_DEBUG
Change-Id: Icbb982c4bcce7586fe35b6b004d0874d6014d5a7
This reverts commit e56dc61697.
The reverted commit claims to be the same as
b201a5db23, but it's not -- it changes the
warning in `riscv_reg_impl_expose_csrs()` instead of the one in
`riscv_reg_impl_hide_csrs()`.
The _targets has to be global as it is accessed at the end of this file.
This is already the case for setup_a5x {}, assure it is the same way for
setup_crx{} . Without this change, the _targets at the end of this file
is empty in case the Cortex-R is the boot core, fix this.
Change-Id: I4979e3125ec7d93bbd56eee0096ae1d9c5f6a565
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8470
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
virtex2 refresh replaced virtex2 program, but the even older programming
commands like xc6s_program still suggest the old, now-removed program
command. This changes the warnings to suggest the command that is still
there, and also adds some indication that you will need to use the .pld
name instead of the .tap name.
Change-Id: I292da62a95a9b414c69cdb1bba8a28dfd16a7336
Signed-off-by: Adam Novak <interfect@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8468
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Daniel Anselmi <danselmi@gmx.ch>
If no mask is given, the value in the option register is replaced
completely. If a mask is set, only those bits that are set in the mask
are transferred into the option register; the others remain unchanged.
Change-Id: If488a10f92d7dcc0e0f192aef5e67c255fd529c3
Signed-off-by: Ondřej Hošek <ondra.hosek@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8466
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
stm32l4x option_write works like stm32h7x option_write, i.e. expects the
value to write after reg_offset and optionally reg_mask after the value.
Change-Id: I57fb4fb1dbf7f43fe063b48f4db2dd5f2ef0ade0
Signed-off-by: Ondřej Hošek <ondra.hosek@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8464
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use mbstowcs() to get required length of wide character string and
include space for terminating null wide character.
Change-Id: I668de6f0acc9b3ec5aca033d870dd9ef354f9077
Signed-off-by: Marcus Nilsson <brainbomb@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8232
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Integer values are interpreted by TCL as decimal, binary, octal
or hexadecimal if prepended with '0d', '0b', '0o' or '0x'
respectively.
The case of '0' prefix has been interpreted as octal till TCL 8.6
but is interpreted as part of a decimal number by JimTCL and from
TCL 9.
Align str_to_buf() to latest TCL syntax by:
- addding support for '0d', '0b' and '0o' prefix;
- dropping support for '0' prefix.
Change-Id: I708ef72146d75b7bf429df329a0269cf48700a44
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8465
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Before the change, if the user wrote to any `tdata*` register, OpenOCD
would sometimes start to disable all the triggers (by writing zeroes to
`tdata1`) and re-enable them again (by witing all trigger registers to the
values read before for each `tselect` value), e.g. on `step`
(see `disable/enable_triggers()`).
There are a couple of issues with such approach:
1. RISC-V Debug Specification does not require custom register types
to support re-enabling by such sequence of writes (e.g. some custom
trigger type may require writing a custom CSR to enable it).
2. OpenOCD may still overwrite these triggers when a user asks to set a
new WP.
This commit introduces `riscv reserve_trigger ...` command to explicitly
mark the triggers OpenOCD should not touch.
Such approach allows to separate management of custom triggers and
offload it onto the user (e.g. disable/enable such triggers by setting up
an event handler on `step`-related events).
Change-Id: I3339000445185ab221368442a070f412bf44bfab
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Currently, during register file examination:
1. A read of an XPR is attempted via 64-bit abstract access.
2. If such a read fails (e.g. connection unstable) XLEN is assumed to be
32.
3. Then `misa` is read. Since `misa` is a CSR and it may be only
readable via program buffer, `s0` should be readable beforehand (at
least some assumption about `xlen` should be made).
4. Before the commit, the `misa.mxl` field was not checked against
`xlen`, therefore erroneous info may have been reported to the user.
Moreover, the `examine()` would pass indicating no error at all.
5. After the commit, `misa.mxl` is checked against `xlen` value.
Change-Id: I3fe5bd6742e564e6de782aad9ed10e65c0728923
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
* removed `progbuf_size` field from `riscv_info`; added getter
* moved `impebreak` field from `riscv_info` to `riscv013_info`
as implementation dependent field; added getter
Signed-off-by: Farid Khaydari <f.khaydari@syntacore.com>
Instead of making people type this in all the time, just default to
"SEGGER RTT" so more things work out of the box.
Change-Id: I147142cf0a755e635d3f66e047be2eb5049cf511
Signed-off-by: Karl Palsson <karl.palsson@marel.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8354
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Open output file in binary mode to disable EOL
conversion on Windows (and sometimes cygwin depending
on installation settings and path).
Change-Id: I38276dd1af011ce5781b0264b7cbb08c32a1a2ad
Signed-off-by: Richard Allen <rsaxvc@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8278
Reviewed-by: Karl Palsson <karlp@tweak.au>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
OpenOCD disables breakpoints on step/resume if they
match the current code position. This is a non-obvious
behavior that should be documented
Change-Id: Id762066569ec6452869a58dfcd9df88c8a14d6ab
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8388
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This is useful for setting a reset catch on a CPU that is being
brought out of reset.
Change-Id: Id8fe9bc3f75fd170f207f470a9f3b0faba7f24c1
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8422
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reduce the amount of boilerplate by moving cti_regs into its only
user, making it a local variable and removing the now-redundant
p_val pointer.
Change-Id: I778cc1e960532fae1ac1a952c6ff19c54e578a5f
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8421
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Some targets start up with the sticky overrun bit set. On such targets
we need to clear it in order to avoid subsequent incorrect reads.
Change-Id: I3e939a9e092de6fcea9494d3179a3386aa1701d2
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8420
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
While at it, fix some small coding style issues.
Change-Id: Ifb8e78b55d29a06d69a3ce71d12d0040777aef13
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8423
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The Linux checkpatch script used by OpenOCD reports hits either as
error, warning and check.
Such classification is meaningful for Linux maintainers, but for
OpenOCD Jenkins they are all considered as errors.
Having such classification in the checkpatch report by Jenkins is
misleading for developers that expect 'warnings' to be probably
ignored by maintainers, while having no idea what 'checks' means.
This patch flattens all the checkpatch reports to 'error' only.
Checkpatch can trigger false positives. OpenOCD uses the tag
Checkpatch-ignore:
in the commit message to prevent Jenkins to report the error, as
described in HACKING.
Change-Id: I1d3164ba1f725c0763dfe362192ffa669b3856e6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8424
Reviewed-by: Karl Palsson <karlp@tweak.au>
Tested-by: jenkins
The function str_to_buf() can be simplified by writing directly
the intermediate results in the output buffer.
Such simplification improves the readability and also makes
scan-build happy, as it does not trigger anymore the warning:
src/helper/binarybuffer.c:328:8: warning: Use of memory
allocated with size zero [unix.Malloc]
if ((b256_buf[(buf_len / 8)] & mask) != 0x0) {
Change-Id: I1cef9a1ec5ff0e5841ba582610f273e89e7a81da
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8396
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Tested-by: jenkins
The name 'buf_len' is misleading, as it usually refers to the byte
length of a buffer. Here we use it for the length in bits.
Rename it as 'buf_bitsize'.
While there, fix checkpatch error by changing the index type to
'unsigned int'.
Change-Id: I78855ed79a346d996d9c0100d94d14c64a36b228
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8395
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
With 'radix' always zero and '_detected_radix' always NULL, drop
the two parameters and simplify str_to_buf().
While there:
- drop some redundant assert(),
- drop the re-check for the base prefix,
- simplify str_strip_number_prefix_if_present() and rename it, as
the prefix MUST be present,
- fix a minor typo,
- update the doxygen description of str_to_buf().
Change-Id: I1abdc8ec0587b23881953d3094101c04d5bb1c58
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8394
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Commit 53b94fad58 ("binarybuffer: Fix str_to_buf() parsing
function") introduces the helper command_parse_str_to_buf() to
parse as number a string on TCL command-line.
The parameter 'radix' can specify the base (decimal, octal,
hexadecimal, or auto-detected).
TCL is supposed to use decimal numbers by default, while octal and
hexadecimal numbers must be prefixed respectively with '0' and
'0x' (or '0X').
This would require the helper to always run auto-detection of the
base, thus always set the 'radix' parameter to zero. This makes
the parameter useless.
Keeping the 'radix' parameter can open the door to future abuse of
TCL syntax, E.g. a command can require an octal value without the
mandatory TCL '0' prefix; the octal value cannot be the result of
TCL expression.
To prevent any future abuse of the 'radix' parameter, drop it.
Change-Id: I88855bd83b4e08e8fdcf86a2fa5ef3269dd4ad57
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8393
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
- src/jtag/drivers/ftdi.c:
```
++<<<<<<< HEAD
+ int i;
+ static const uint8_t zero;
++=======
+ uint8_t zero = 0;
++>>>>>>> ocd_upstream
```
Decided to choose the latter.
- src/target/riscv/riscv-013.c:
```
++<<<<<<< HEAD
+ int abs_chain_position;
+ /* The base address to access this DM on DMI */
+ uint32_t base;
++=======
+ unsigned int abs_chain_position;
+
++>>>>>>> ocd_upstream
```
Decided to choose the latter (abs_chain_position is unsigned now)
- src/target/riscv/batch.c:
```
++<<<<<<< HEAD
++=======
+ void dump_field(int idle, const struct scan_field *field)
+ {
...
+ }
++>>>>>>> ocd_upstream
```
dump_field function is not needed anymore
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
Use correct TCL syntax and save string map operation.
Change-Id: Ic2a522bd57cf6610b7df1d9cddd0fbdc2076ed62
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8426
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Logically, BSCAN tunneling is used to establish a connection, therefore
it should be set up before the communication starts (i.e. before
`init`).
Moreover, current implementation does not support changing
`bscan_tunnel_ir_width` after `init`. This is evident by RISC-V handler
of the `init` itself.
Link: 9a23c9e679/src/target/riscv/riscv.c (L467-L481)
Change-Id: I817c6a996f7f7171b2286e181daf1092bd358f69
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Also avoid receiving data if the value is discarded on the call-site.
Change-Id: Ied87b551536a00d9fad469b9843cccae1976e6b6
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
* Register file examination is separated.
* Allow to access registers through cache as early as possible to re-use
general register access interface and propely track state of the
register.
* Reduces the number of operations: S0 and S1 are saved/restored only
when needed (targets without abstract CSR access).
Change-Id: I2e205ae4e88733a5c792f8a35cf30325c68d96b2
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Parshintsev Anatoly
Evgeniy Naydanov
Evgeniy Naydanov
Marek Vasut
Adam Novak
Ondřej Hošek
Marcus Nilsson
Antonio Borneo
Tim Newsome
Farid Khaydari
Anatoly Parshintsev
Tomas Vanek
Karl Palsson
Richard Allen
Marc Schink
Peter Collingbourne