3805e53fd8
Dick Hollenbeck <dick@softplc.com> better logging
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@1264 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-19 19:45:01 +00:00
063f4c182c
- rlink interface support from Lou Deluxe <lou.openocd012@fixit.nospammail.net>
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@1258 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-19 04:25:22 +00:00
508ed7a7c6
- Update tap_state_strings to correspond to SVF state names
...
- Use new jtag_state_name() instead of global tap_state_strings[]
git-svn-id: svn://svn.berlios.de/openocd/trunk@1240 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-14 20:33:01 +00:00
0cba0d4df3
- remove target specific variant and use target->variant member
...
- fix build warning in cortex_m3
- code cleanup - remove trailing lf and convert c++ comments
git-svn-id: svn://svn.berlios.de/openocd/trunk@1238 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-13 12:44:39 +00:00
846a2589a4
Add JTAG tap events for enable/disable
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@1237 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-13 07:05:38 +00:00
bcde5b3830
Clean up references to old tap_state names
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@1235 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-13 06:59:24 +00:00
c45de8073d
Change tap_state naming to be consistent with SVF documentation.
...
Courtesy of Dick Hollenbeck <dick@softplc.com>
git-svn-id: svn://svn.berlios.de/openocd/trunk@1232 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-13 06:25:50 +00:00
d44c70a4b0
Allow -expected-id to be specified multiple times when creating a jtag tap
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@1229 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-12 00:21:07 +00:00
9689fa4802
Fix for Hiroshi Ito discovery of mis-aligned memory allocation
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@1205 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-04 01:15:13 +00:00
1006986ab1
update zy1000 to svn head jtag api
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@1197 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-01 14:21:24 +00:00
a28eaa85f7
jtag newtap change & huge manual update
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@1194 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-30 22:25:43 +00:00
cca10e6534
- fox small typo in handle_irscan_command
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@1178 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-20 10:11:09 +00:00
e3462b228c
jtag_get_device() now returns NULL and reports error instead of invoking exit()
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@1176 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-19 08:22:47 +00:00
d4c1e82d8c
926ejs target uses rclk. Cleaned up jtag_khz output a bit.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@1138 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-05 13:09:49 +00:00
bbafcb3758
disable continous polling while srst is asserted and power dropout is detected
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@1134 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-05 07:45:31 +00:00
ed9c257551
Laurentiu Cocanu - more help text
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@1087 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-22 09:30:33 +00:00
ccc2e3fe76
Laurentiu Cocanu - memory read/write and exit() error path fixes
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@1064 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-15 11:44:36 +00:00
68c598e88d
- added myself to copyright on files i remember adding large contributions for over the years
...
- cleaned up headers to match rest of code
- added missing svn props for previously added files
git-svn-id: svn://svn.berlios.de/openocd/trunk@987 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-20 10:50:53 +00:00
0ae7f962f8
Duane Ellis: target_process_reset is now implemented in tcl. This allows better control from target configuration scripts.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@984 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-12 06:56:00 +00:00
fe1f475e64
continue execution even if chain can't be validated. This will, hopefully, give us some more feedback on what's wrong.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@953 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-20 11:51:52 +00:00
dc33cb668d
DANGER: committed work-in-progress to handle examination of jtag devices without IDCODE. I think this works, but I may have to pull that change out again...
...
added alive_sleep() to avoid warnings when resetting target(fixes incomprehensible error timeout error messages in GDB).
git-svn-id: svn://svn.berlios.de/openocd/trunk@941 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-19 13:55:14 +00:00
fbb46cfaff
fix warning.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@911 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-13 14:41:23 +00:00
bb36f541dd
fix output from jtag_khz when only jtag_speed has been invoked
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@908 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-11 13:36:56 +00:00
47ae48bff7
fix error message
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@904 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-11 10:10:40 +00:00
ce16ff901c
- fix target_examine declaration
...
- remove build warnings
- added --enable-gccwarnings to docs
- update mips_m4k_examine function
git-svn-id: svn://svn.berlios.de/openocd/trunk@893 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-06 14:36:37 +00:00
f370d70670
Duane Ellis: fix warnings
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@890 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-05 12:27:18 +00:00
e4729b3b7a
TAP_TLR won't work in a pathmove sequence. OpenOCD shouldn't and doesn't need to support this.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@886 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-04 06:54:58 +00:00
7991286814
warning output upon connection problems.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@882 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-30 05:56:53 +00:00
984dd0635c
more jtag_examine() checks. catch errors during first 640 bits.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@881 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-29 14:58:04 +00:00
526fe3d83e
added yours sincerely for files where I feel that I've made non-trivial contributions.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@872 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-25 06:54:17 +00:00
b2dbb07f27
allow jtag minidriver access to cmd_queue_cur_state for jtag_add_pathmove()
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@867 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-24 10:17:12 +00:00
65b4c4117d
- fix typo in jtag_add_end_state
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@863 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-23 21:31:43 +00:00
dfbb9f3e89
- jtag_khz/speed are now single parameter only. These are used
...
from pre/post_reset event scripts. Adding the second parameter was
a mistake seen in retrospect. this gives precise control in post_reset
for *when* the post reset speed is set. The pre_reset event was
added *after* the second parameter to jtag_khz/speed
- the target implementations no longer gets involved in the reset mode
scheme. Either they reset a target into a halted mode or not.
target_process_reset()
detects if the reset halt failed or not.
- tcl target event names are now target_N_name. Mainly internal
at this early stage, but best to get the naming right now.
- added hardcoded reset modes from gdb_server.c. I don't know precisely what
these defaults should be or if it should be made configurable. Perhaps some
hardcoded defaults will do for now and it can be made configurable later.
- bugfix in cortex_m3.c for reset_run_and_xxx?
- issue syntax error upon obsolete argument in target command instead of
printing message that will surely drown in the log
git-svn-id: svn://svn.berlios.de/openocd/trunk@849 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-21 15:59:41 +00:00
60ba4476df
- fix incorrectly registered function openocd_array2mem
...
- removed unused variables
- reformatted lpc288x.[ch]
- fixed helper/Makefile.am dependencies
- add correct svn props to added files
git-svn-id: svn://svn.berlios.de/openocd/trunk@829 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-18 11:38:23 +00:00
0470a9652b
keep_alive() fix for reset warnings.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@827 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-18 10:50:51 +00:00
679592d42e
Charles Hardin <ckhardin@gmail.com> move tcl stuff nearer to where it belongs.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@824 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-18 06:24:57 +00:00
b06f254b24
Charles Hardin ckhardin at gmail.com
...
This address the >32 bit problem with drscan
also added a check for bypass in the execute since this will manifest itself
as a memory corruption when this check helps to debug the problem alot easier
git-svn-id: svn://svn.berlios.de/openocd/trunk@794 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-11 17:40:15 +00:00
c5b718f5e8
- retired variable stuff.
...
- drscan is now a low level tcl command:
execute DR scan <device> <num_bits> <value> <num_bits1> <value2>
- removed obsolete partial command text support
git-svn-id: svn://svn.berlios.de/openocd/trunk@791 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-11 12:17:56 +00:00
77fd8150ce
Pavel Chromy:
...
- TAP reset without TRST shall be called TLR (stands for test-logic-reset, named after the TAP state it ends is) rather than tms (test-mode-select)
- some comments changed to /* C coding style */
git-svn-id: svn://svn.berlios.de/openocd/trunk@717 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-06-18 13:52:15 +00:00
9f8d50bf81
Pavel Chromy: fix logging syntax error + formatting & removing obsolete comments.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@702 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-06-04 11:09:41 +00:00
e6f42eaeb6
jtag_exexcute_queue() now logs error when it is invoked before 'init' command.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@673 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-22 07:28:56 +00:00
0989c374e9
reverted change in 658 and simply removed the busted warning for now.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@668 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-19 20:11:05 +00:00
b723e78d70
Michael Fischer found this bogus warning. Fixed.
...
Error: jtag.c:941 jtag_add_reset(): BUG: transition of req_tlr_or_trst ...
git-svn-id: svn://svn.berlios.de/openocd/trunk@665 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-19 18:54:50 +00:00
548bb19aa2
- added jlink support, based on Jürgen Stuber patch
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@658 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-14 14:13:38 +00:00
ee793f0fcb
This matters for embedded devices, but is probably not observably better for PC hosted OpenOCD.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@647 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-07 14:25:34 +00:00
95efa83ef5
Edgar's naming convention fixes.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@629 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-30 09:34:31 +00:00
06cdb3ad44
Edgar's added support for printing jtag_khz
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@628 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-30 09:13:54 +00:00
a13764b5d0
fix for gaffe in 555 that stopped JTAG chain examine + validate from running.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@588 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-16 19:17:15 +00:00
7280d4a2c7
A dummy driver to test codepath w/no contact w/target.
...
git-svn-id: svn://svn.berlios.de/openocd/trunk@572 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-13 13:21:49 +00:00
d9f50cb7d6
- Set up ICE registers after TRST
...
- Work in progress to allow launching GDB/telnet server *before* jtag
chain enum, validate & examine
git-svn-id: svn://svn.berlios.de/openocd/trunk@569 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-13 10:09:27 +00:00
oharboe
kc8apf
ntfreak
duane