The command "flash bank" has updated syntax.
Add the mandatory parameter <target> to the usage message
that prints in case of error.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
jtag_get/set_end_state() is now deprecated.
There were lots of places in the code where the end state was
unintentionally modified.
The big Q is whether there were any places where the intention
was to modify the end state. 0.5 is a long way off, so we'll
get a fair amount of testing.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Until this time only basic SLC functionality exists when you want to use SLC to access external nand flash.
Basic functionality can be selected with command:
lpc3180 select 0 slc
It is anyway very slow to write/read to/from nand flash.
With the new command, SLC speed improved about 20 times, and hardware ECC info also read/written from/to nand flash OOB area:
lpc3180 select 0 slc bulk
Speed improvement achieved by using working are in SRAM of the LPC3250 chip and controlling DMA controller to interact between SRAM and SLC peripheral.
Here are the patches, and if they are ok than take them.
Tested with hitex LPC3250 usb stick.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Fixes bug that prevented users from specifying a base address of
0x80000000 or higher in image commands (flash write_image, etm image,
xscale trace_image).
image.base_address is an offset from the start address contained in
the image file (if there is one), or from 0 (for binary files). As a
signed 32-bit int, it couldn't be greater than 0x7fffffff, which is a
problem when trying to write a binary file to flash above that
address. Changing it to a 64-bit long long keeps it as a signed
offset, but allows it to cover the entire 32-bit address space.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Add flash algorithm support for the PIC32MX.
Still a few things todo but this dramatically decreases
the programing time, eg. approx programming for 2.5k test file.
- without fastload: 60secs
- with fastload: 45secs
- with fastload and algorithm: 2secs.
Add new devices to supported list.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Cannot protect or unprotect single sector in cfi flash.
When first==last the procedure fails.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
At the end I have added comments /* FIXME: to be removed */
There are 3 lines in which my simplification is not complete due to
data dependency with LOG_DEBUG() messages visible in the patch.
Such log_debug has been introduced on Jan 22, 2007 with commit
4fc97d3f27 during development activity
in this file/procedure.
From my point of view, these logs can be removed, since not part of a
consistent flow of information.
Alternatively, could be borrowed in the new cfi_send_command(), but
this will increase verbosity.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
In the code a single field was all that was ever used. Makes
jtag_add_ir_scan() simpler and leaves more complicated stuff
to jtag_add_plain_ir_scan().
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
jtag_add_dr/ir_scan() now takes the tap as the first
argument, rather than for each of the fields passed
in.
The code never exercised the path where there was
more than one tap being scanned, who knows if it even
worked.
This simplifies the implementation and reduces clutter
in the calling code.
use jtag_add_ir/dr_plain_scan() for more fancy situations.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
JEDEC standard reports Vpp integer part encoded as 4 bit HEX value.
To print it using decimal digits, %u is required.
Other voltage values are coded as BCD, so %x is appropriate.
Code already prints one nibble at a time, so no need for field width
and precision in format string.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
When the beginning or end of the specified range of sectors
already has the requested protection status, don't ask the
flash driver to change those sectors.
This will among other things turn command sequences like
this into the NOPs one would expect:
flash protect_check 0
flash info 0
... reports everything as unprotected ...
flash protect 0 0 1 off
That speeds things up (by whatever work was just avoided).
Also, with Stellaris (which can't unprotect flash at page level)
this can eliminate some undesirable/false error reports. (And
finishes fixing a bug currently listed in our bug database...)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The NOR infrastructure caches some per-sector state, but
it's not used much ... because the cache is not trustworthy.
This patch addresses one part of that problem, by ensuring
that state cached by NOR drivers gets invalidated once we
resume the target -- since targets may then modify sectors.
Now if we see sector protection or erase status marked as
anything other than "unknown", we should be able to rely
on that as being accurate. (That is ... if we assume the
drivers initialize and update this state correctly.)
Another part of that problem is that the cached state isn't
much used (being unreliable, it would have been unsafe).
Those issues can be addressed in later patches.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Give a more accurate failure message when trying to unprotect; don't
complain about pages being write protected, just say that unprotect is
not supported by the hardware ... referencing the new "recover" command,
which is the way to achieve that.
Likewise, when trying to protect, talk about "pages" (matching hardware
doc) not "sectors" (an concept that's alien to these chips).
Also make the helptext for the "recover" command mention that it
also erases the device.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Fix some issues with the generic LPC1768 config file:
- Handle the post-reset clock config: 4 MHz internal RC, no PLL.
This affects flash and JTAG clocking.
- Remove JTAG adapter config; they don't all support trst_and_srst
- Remove the rest of the bogus "reset-init" event handler.
- Allow explicit CCLK configuration, instead of assuming 12 MHz;
some boards will use 100 Mhz (or the post-reset 4 MHz).
- Simplify: rely on defaults for endianness and IR-Capture value
- Update some comments too
Build on those fixes to make a trivial config for the IAR LPC1768
kickstart board (by Olimex) start working.
Also, add doxygen to the lpc2000 flash driver, primarily to note a
configuration problem with driver: it wrongly assumes the core clock
rate never changes. Configs that are safe for updating flash after
"reset halt" will thus often be unsafe later ... e.g. for LPC1768,
after switching to use PLL0 at 100 MHz.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
windows api does not define a posix sleep, use usleep that
has an openocd wrapper to the win32 native function.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
- armv7m_run_algorithm now requires all algorithms to use
a software breakpoint at their exit address
- updated all algorithms to support this
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Stellaris chips have a procedure for restoring the chip to
what's effectively the "as-manufactured" state, with all the
non-volatile memory erased. That includes all flash memory,
plus things like the flash protection bits and various control
words which can for example disable debugger access. clearly,
this can be useful during development.
Luminary/TI provides an MS-Windows utility to perform this
procedure along with its Stellaris developer kits. Now OpenOCD
users will no longer need to use that MS-Windows utility.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
I have successfully programmed the AT90CAN128, based on the mega128
with some small modifications.
[ dbrownell@users.sourceforge.net: patch cleanup ]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Issue warning to user when unlocking or writing the option bytes.
The new settings will not take effect until a target reset.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Issue warning to user when unlocking or writing the option bytes.
The new settings will not take effect until a target reset.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
The default state of the STR7 flash after a reset init is unlocked.
The information in the flash driver now reflects this.
The information about the lock status cannot be read from the
flash chip, so the user is informed that flash info might not
contain accurate information.
[dbrownell@users.sourceforge.net: line length shrinkage]
Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The "NOR: last_addr also needs correction when checking alignment"
patch omitted a necessary update to the key diagnostic; fix.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
According to OpenOCD error handling rules the error is
logged at where it occurs(same site where an exception
would have been thrown).
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
The LPC3180 NAND driver was crashing on some large page chips.
Fix:
- Crash and related functionality (don't memset too much OOB data)
- Some debug messages
- Command handling now works
[dbrownell@users.sourceforge.net: whitespace/linelength/message cleanup]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Identical to the existing 2412/2443 support except for the base address
and NFCONF value (bit 2 is reserved and should be written as 1 ref UM).
Tested on a s3c6410 board, but controller is identical in 6400/6410
except for 8bit MLC ECC support in 6410 which isn't supported by the
driver.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Using the erase bank command will cause a time out error. Replacing
this with the erase sector bank will provide a slower but safer and
stable method to erase the flash.
Signed-off-by: Laurentiu Cocanu <laurentiu.cocanu@zylin.com>
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Add a NOR flash mechanism where erase_address ranges can be padded
out to sector boundaries, triggering a diagnostic:
> flash erase_address 0x0001f980 16
address range 0x0001f980 .. 0x0001f98f is not sector-aligned
Command handler execution failed
in procedure 'flash' called at file "command.c", line 647
called at file "command.c", line 361
>
> flash erase_address pad 0x0001f980 16
Adding extra erase range, 0x0001f800 to 0x0001f97f
Adding extra erase range, 0x0001f990 to 0x0001fbff
erased address 0x0001f980 (length 16) in 0.095975s (0.163 kb/s)
>
This addresses what would otherwise be something of a functional
regression. An earlier version of the interface had a dangerous
problem: it would silently erase data outside the range it was
told to erase. Fixing that bug turned up some folk who relied on
that unsafe behavior. (The classic problem with interface bugs!)
Now they can get that behavior again. If they really need it,
just specify "pad".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Add file comments to a few files. Make the GDB server use
more conventional (pointer-free) hex digit conversion.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Make "usage" messages use the same EBNF as the User's Guide;
no angle brackets. Improve and correct various helptexts.
Don't use "&function"; a function's name is its address.
Remove a couple instances of pointless whitespace; shrink a
few overlong lines; fix some bad indents.
Add TODO list entry re full support for NAND/NOR bank names.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Usage messages should use the same EBNF as the User's Guide;
no angle brackets. Be more complete too ... some params were
missing. Improve and correct various helptexts.
Make user's guide refer to the NAND "driver" name, not the
controller name; that's a bit more precise.
Don't use "&function"; its name is its address. Line up struct
initializers properly. Remove some blank lines.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Make "usage" messages use the same EBNF as the User's Guide;
no angle brackets. Improve and correct various helptexts.
Don't use "&function"; a function's name is its address.
Remove a couple instances of pointless whitespace.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
It can invalidate ECC codes, and in general is not guaranteed
to work. (However on some chips it _appears_ to behave.) Just
don't do it; don't write in those cases.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Most commands are usable only at runtime; so don't bother saying
that, it's noise. Moreover, tokens like EXEC are cryptic. Be
more clear: highlight only the commands which may (also) be used
during the config stage, thus matching the docs more closely.
There are
- Configuration commands (per documentation)
- And also some commands that valid at *any* time.
Update the docs to note that "help" now shows this mode info.
This also highlighted a few mistakes in command configuration,
mostly commands listed as "valid at any time" which shouldn't
have been. This just fixes ones I noted when sanity testing.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Print "ssize_t" as "%ld" (+ cast to long) not as "%zu".
Official MinGW (gcc 3.4.5) doesn't understand "z" flag.
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Otherwise the new alignment checking algorithm thinks that the
address is not aligned, because it is way beyond the last sector.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Resolve a regression when using newish automagic "write_image"
modes, by always padding to the end of affected sectors.
Also document some issues associated with those automagic options,
in the User's Guide and also some related code comments.
We might need similar padding at the *beginning* of some sectors,
but this is a minimalist fix for the problems which have currently
been reported (plus doc updates).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
It's less accepting of signed char ... insisting that e.g. tolower()
not receive one as a parameter.
It's probably good to phase out such usage, given the number of bugs
that lurk in the vicinity (assumptions that char is unsigned), so fix
these even though such usage is actually legal.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This creates the TCL interface for configuring an AT91SAM9 NAND flash
controller and implements the necessary functions to correctly work with
a NAND flash device connected to the chip. This includes updates to the
driver list and the Makefile.am to support building the driver and also
houses the documentation update in openocd.texi.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Much to my surprise, I observed a "flash erase_address ..."
command erasing data which I said should not be erased.
The issue turns out to be generic NOR flash code which was
silently, and rather dangerously, morphing partial-sector
references into unrequested whole-sector ones.
This patch removes that low-level morphing. If desired, it
can and should be done in higher level code. (We might need
to fix some stuff in the GDB server code.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
It's currently allocating a big buffer but writing it out in
units of sizeof(host's pointer) ... sub-optimal.
Plus fix a couple minor coding style goofs.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Word count == size/4; cope. And increase buf_min so it's large
enough to cover the overhead in my tests.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Try to right-size the SRAM buffers, by not:
- using them for very small writes
- giving up when a large buffer isn't available
- allocating buffers much larger than their data
Also don't:
- bother loading the code unless we allocate the writebuffer too
- be so verbose with messaging:
* be more concise
* reduce importance (e.g. DEBUG not WARNING)
* remove duplication
The minimum buffer size is something of a guess. It's eight
times smaller than before, almost the same size as the code
being downloaded. It probably deserves some tuning.
Also, note an erratum affecting flash protection on some chips;
and narrow many over-wide lines affected by the above changes.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Refactored the write page raw function into two new functions
for writing data to a NAND device and then another function to
finish up a write to a NAND device. This includes some new
updates to introduce more error checking to existing code.
[dbrownell@users.sourceforge.net: fix fault handling, whitespace]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Added a new function to encapsulate reading a page of data from
a NAND device using either the read_block_data function of a NAND
controller or to use direct reading of data from the NAND device.
This also adds some performance enhancements and uses the read_data
function if the read_block_data function fails safely (because it
can't allocate a buffer in the working area).
[dbrownell@users.sourceforge.net: fix fault handling, whitespace]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Someday revisit various issues: Tempest parts support writing
more than one word at a time; for some target firmware it might
be necessary to save and restore flash IRQ configuration. (The
safest policy is likely to always reset after flash updates.)
Plus swap some undesirable TAB characters with SPACE.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Fix potential memory leak: make sure the per-bank data
structures are only allocated in probe(), and that calling
probe() multiple times is a NOP. Use it for auto_probe().
Require probe() to have done its thing: don't make access
routines cope with it not having been called. Shrink a
bunch of failure paths; and in some cases, correct them.
Don't needlessly insist on a halted target for probe().
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
No point in reading and discarding a status value when fetching
part description data. Or having that needless "#if 0" code.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Previously "reading" clock info (and part info) also, as a side
effect, wrote the flash timing register. Instead, be more safe:
"reading" should only read. Write paths still refresh timing,
coping with changes the application code may have made.
Also rename the routine which sets flash timing, indicating what
it's really doing; it's got nothing to do with a "mode".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
I added the remaining devices and device IDs to stellaris.c, and
removed several devices that don't exist on the Stellaris web page.
Additionally, I found a few devices with duplicate IDs ... the DID1
Version Number for LM3Sxxx parts have DID1 Version = 0x0, and for
LM3Sxxxx have DID1 Version = 0x1. So I extended the comparison to
use the VER and FAM fields from DID1 also.
ID=0x33: LM3S812 (DID1v0) and LM3S2616 (DID1v1)
ID=0x39: LM3S808 (DID1v0) and LM3S2276 (DID1v1)
These are the parts I removed from the file for lack of documentation
(no data sheet to confirm part ID):
LM3S318,
LM3S1101, LM3S1108,
LM3S1615, LM3S1616,
LM3S2016,
LM3S2101, LM3S2108,
LM3S3759, LM3S3768,
LM3S5757, LM3S5767, LM3S5768, LM3S5769,
LM3S6815, LM3S6816,
LM3S6915, LM3S6916,
LM3S6111, LM3S6118.
Also, sort devices according to part number.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Bugfix the read side of flash protection:
- read the right register(s)!
- handle more than 64K
- record the results in the right places
- don't display garbage.
Partially bugfix the write side:
- use 2KB lock regions instead of 1KB pages (!)
- validate input range
- don't try to _remove_ protection (it's write-once)
- #define values we'll need to commit writes.
- ... still doesn't handle pages over 64KB mark, or commit writes
And minor cleanup and fixes:
- get rid of some forward decls
- properly locate a doxygen comment
- fix some bad indentation
- remove superfluous #include
- add a new part ID (many are still missing)
- make the downloaded algorithm code be read-only
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Move most declarations in <target/armv4_5.h> to <target/arm.h>
and update users.
What's left in the older file is stuff that I think should be
removed ... the old register cache access stuff, which makes it
awkward to support microcontroller profile (Cortex-M) cores.
The armv4_5_run_algorithm() declaration was moved too, even
though it's not yet as generic as it probably ought to be.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Move the ARM opcode macros from <target/armv4_5.h>, and a few
Thumb2 ones from <target/armv7m.h>, to more appropriate homes
in a new <target/arm_opcodes.h> file.
Removed duplicate opcodes from that v7m/Thumb2 set. Protected
a few macro argument references by adding missing parentheses.
Tightening up some of the line lengths turned up a curious artifact:
the macros for the Thumb opcodes are all 32 bits wide, not 16 bits.
There's currently no explanation for why it's done that way...
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Rename the existing 'flash banks' implementation as 'flash list', and
replace the broken 'flash_banks' TCL wrapper with a new command handler.
Adds documentation for the new 'flash list' command in the user guide.
The 'flash banks' command produces a list that needs to be formatted
properly for GDB's 'mem info' to work properly. The flash_banks TCL
wrapper provided this formatting, but wrappers no longer work for
second-level commands as they did in the past. With this patch,
the 'flash_banks' command can be used with the new command syntax
and display the required information.
More updates from the code review by Steve Grubb <sgrubb@redhat.com>.
The Jim float-comparision bug just gets a comment not a fix, though.
Cc: Steve Grubb <sgrubb@redhat.com>.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Rename nand.h as flash/nand/core.h, chase consumers. The public APIs
need to be sorted out with imp.h, but this allows other changes to
begin improving the separation between policy and mechanism.
Moves #include <target/target.h> and #include "driver.h" into the
internal headers or source files, removing it from <flash/nand/core.h>.
Moves commands into nand/tcl.c and core implementation to 'nand/core.c'
and 'nand/fileio.c'. Eliminates 'flash/nand.c'.
Adds 'nand/imp.h' to share routines between TCL commands and core.
This work parallels the NOR directory, encapsulating the NAND drivers
into a separate file. This takes an extra step by encapsulating the
type of data structure used to manage the drivers, allowing it to be
changed from an array to a dynamic list in the future.
Move the bulk of the flash.h file into flash/nor/core.h, leaving an
empty husk that will be removed in the next patch.
The NOR driver structure is an implementation detail, so move it into
its own private header file <flash/nor/driver.h> along with helper
declaration for finding them by name.
Splits the exec mode commands out of flash.c into the flash/nor/ files.
The routines used by these high-level commands are moved into nor/core.c,
with their internal declarations placed in nor/imp.h.
Fixes distribution of <flash/nor/core.h> header.
The newly moved flash TCL routines access the internals of the module
too much. Fix the layering issues by adding new core NOR flash APIs:
<flash/nor/core.h>:
- flash_driver_find_by_name() - self-descriptive
<flash/nor/imp.h>:
- flash_bank_add() - encapsulates adding banks to bank list
- flash_bank_list() - encapsulates retreiving bank list
This allows the externs in flash/nor/imp.h to be removed, and
these mechanisms may now be re-used by other flash module code.
Moves the top-level 'flash' command handlers into flash/nor/tcl.c,
with flash/nor/imp.h providing an internal implementation header
to share non-public API components.
Updates the ARM NAND I/O code to look at and update the op
field of arm_nand_data to reflect the last operation performed.
It uses this field to copy the correct code to the target in the
case where the struct is used for reads and writes.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Modify the arm_nand_data struct to better support both read and
write operations while using the same struct. An additional
field was added, and initialized, to record the last operation
so that the correct code can be loaded to the working area.
[dbrownell@users.sourceforge.net: merge init patch, tweak GPL note]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Created a new function that handles sending a command and the address
information for pages to a NAND device.
[dbrownell@users.sourceforge.net: tweaked line lengths, name 'oob_only']
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Before we can -I the top-level src/ directory alone, references to
"hello.h" must be updated. This is an internal header, so it does
not need angle brackets.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "s3c24xx_regs.h"
the following form should be used.
#include <flash/nand/s3c24xx_regs.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "ocl.h"
the following form should be used.
#include <flash/nor/ocl.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "nand.h"
the following form should be used.
#include <flash/nand.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "flash.h"
the following form should be used.
#include <flash/flash.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm_nandio.h"
the following form should be used.
#include <flash/arm_nandio.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "target.h"
the following form should be used.
#include <target/target.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "mips32.h"
the following form should be used.
#include <target/mips32.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "image.h"
the following form should be used.
#include <target/image.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "embeddedice.h"
the following form should be used.
#include <target/embeddedice.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "avrt.h"
the following form should be used.
#include <target/avrt.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "armv7m.h"
the following form should be used.
#include <target/armv7m.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "armv4_5.h"
the following form should be used.
#include <target/armv4_5.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm966e.h"
the following form should be used.
#include <target/arm966e.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "arm7_9_common.h"
the following form should be used.
#include <target/arm7_9_common.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "algorithm.h"
the following form should be used.
#include <target/algorithm.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "jtag.h"
the following form should be used.
#include <jtag/jtag.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "types.h"
the following form should be used.
#include <helper/types.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "time_support.h"
the following form should be used.
#include <helper/time_support.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "membuf.h"
the following form should be used.
#include <helper/membuf.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "log.h"
the following form should be used.
#include <helper/log.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "fileio.h"
the following form should be used.
#include <helper/fileio.h>
The exception is from .c files in the same directory.
Changes from the flat namespace to heirarchical one. Instead of writing:
#include "binarybuffer.h"
the following form should be used.
#include <helper/binarybuffer.h>
The exception is from .c files in the same directory.
Includes the src directory in the search path, so header files may be
migrated from:
#include "foo.h"
to
#include <module/foo.h>
which is more conducive for installation.
Move device argument parsing after check for number of arguments;
otherwise, calling this command without any arguments would access
argv[0] before checking whether it even existed.
Fixed the header file to properly specify the doxygen documentation for the
items defined in it.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This updates the functions in the file to all have doxygen comments
describing what they do.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Created a function for copying code to the working area on
a target. The NAND write and read functions are updated to
include use of this function.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Implementation of the NAND read function for ARM NAND I/O that
includes running a local algorithm on a device to increase the
performance of block reads.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Command upgrading introduced two off-by-one bugs in the flash commands.
This patch fixes the 'flash {protect,erase_sector}' commands to check
that they have been passed the correct number of arguments.
Ammended during commit to fix help text for 'erase_address' too.
Removes hello and foo commands from top-level registration. Instead,
the dummy interface driver and faux flash driver have been augmented
to register these commands as sub-commands.
Adding jim_handler field to command_registration allows removing the
register_jim helper. All command registrations now go through the
register_command{,s}() functions.
Move bulk of for-loop to a new static command helper function.
Adds handle_nand_list_drivers command handler, registered as
'nand drivers'.
Improves command help text and error reporting.
Move variables to point of first use, reducing their scope.
Add driver_name temporary to help arguments be changed later.
Eliminates the useless 'found' variable, changing the code to terminate
the loop immediate and return its success.
After adding support for referencing banks by name, renames
the COMMAND_HELPERs appropriately:
flash_command_get_bank_by_num -> flash_command_get_bank
nand_command_get_device_by_num -> flash_command_get_device
Add get_flash_bank_by_name (and get_nand_device_by_name) helpers
to retrieves struct flash_bank * (struct nand_device *) given a
driver name and an (optional) driver-specific bank index.
These are used to extend flash_command_get_bank_by_num (and
nand_command_get_device_by_num) to allow all flash (nand) commands to
reference defined banks by name, not just by number.
To avoid some code duplication, add the flash/common.[ch] files to hold
functionality common to both types driver. The first two methods are
helpers for the above routines to find a bank specified by a "name" or
"name.index" string. get_flash_name_index() finds the '.index' portion,
while flash_driver_name_matches() performs the string portion matching.
Updates all command parsing of simple "enable" and "disable" arguments.
A few case in the tree use a tri-state or extended arguments, which
cannot use this simple macro.
Simlifies the xscale icache/dcache command handler logic.
Moves definitions for each layer into their own file, eliminating
layering violations in the built-in TCL code. Updates src/Makefile.am
rules to include all files in the final startup.tcl input file, and
others Makefile.am rules to distribute the new files in our packages.
All ARM cores need to provide obsolete FPA registers in their
GDB register dumps. (Even though cores with floating point
support now generally use some version of VFP...)
Clean up that support a bit by sharing the same dummy registers,
and removing the duplicate copies. Eventually we shouldn't need
to export those dummies.
(This makes the ARMv7-M support include the armv4_5 header, and
cleans up related #includes, but doesn't yet use anything from
there except those dummies.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Use size_t instead of uint32_t when specifying file sizes. Update all
consumers up through the layers to use size_t when required. These
changes should be safe, but the higher-levels will need to be updated
further to receive the intended benefits (i.e. large file support).
Add error checking for fileio_read and file_write. Previously, all
errors were being silently ignored, so this change might cause some
problems for some people in some cases. However, it gives us the chance
to handle any errors that do occur at higher-levels, rather than burying
our heads in the sand.
Add the 'nand verify' command to perform a dump and fake-write
simultaneously, checking the read bits against those generated by the
write process. Appropriate user documentation for this command has
been added to the user guide as well.
The algorithm presently makes a relatively naive comparison. Some chips
that use ECC may not verify correctly using this implementation, but the
new documentation provides details about this limitation.
This patch eliminates duplicated code in the the NAND 'dump' and 'write'
by using the new static helper functions.
These changes also fix a possible memory leak in nand dump command, in
the case that the dump file failed to open.
Overall, the changes should be functionally equivalent, but the
resulting code will be easier to improve and extend further.
This patch provides helpers APIs that will eliminate duplicated code in
the the NAND 'dump' and 'write' commands by factoring their common code
into static helper functions. These helpers may be useful for creating
new commands, as shown in the final patch to 'verify' flash from a file.
Several previously unreported error conditions now generate messages and
propogate the return codes, such as when the file fails to open and bad
arguments are given. These changes will fix a possible memory leak in
nand dump command, in the case that the dump file failed to open.
Overall, the changes should be functionally equivalent, but the
resulting code will be easier to improve and extend consistently.
Don't include "target.h" from more headers than necessary. This
avoids needless interdependencies and duplicated include paths.
Don't needlessly include it in source files, either.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Lots of files still include it, often through needless
duplicate inclusion of "log.h"; sigh.
This cleans up the inclusion graph a bunch, so there are
fewer inclusion paths, but it doesn't change much otherwise.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Most files in the tree seem to have ended up including this,
and *quite* needlessly ... only code implementing or using
downloadable algorithms actually needs these declarations.
So take it out of the header files which included it, and put
it in files which use it ... reduce needless interdependencies.
Also: "algorithm.h" doesn't need to include "types.h" again;
it already comes from a different header.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Remove the last external user of arm7_9_get_arch_pointers(), and
that annoying downcast utility. Add an is_arm7_9() predicate.
Stop returning specious success codes on various failure paths
in the ARM7/ARM9 commands which used that downcast utility.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The number of command arguments will always be 0 or more, so use
the right type in handlers. This has a cascading effect up through
the layers, but the new COMMAND_HANDLER macros prevented total chaos.
By using CALL_COMMAND_HANDLER, parameters can be reordered, added, or
even removed in inherited signatures, without requiring revisiting
all of the various call sites.
The FLASH_BANK_COMMAND_HANDLER provides an extended command handler
using the __COMMAND_HANDLER macro, whereby changing that macro is
sufficient to update flash handlers with the new signature. It also
enforces uniform style and scope when implementing this handler.
To be more informative (and consistent with flash and pld trees), change
'device' parameter name to 'nand' in NAND source files. This change
eliminates confusing 'device->device->' instance from the code, and
it simplifies the forthcoming command handler patches.
Add 'const' keyword to 'char *' parameters to allow command handlers to
pass constant string arguments. These changes allow the 'args' command
handler to be changed to 'const' in a subsequent patch.
Subsequent patches expect all command handlers to use a uniform
parameter naming scheme. In the entire tree, these two files used
standard 'argv' instead of our non-standard 'args'. This patch opts
to reduces the noise required to unify the command handlers, using
dominant 'args' form.
A future patch may be used to convert us back to the standard argv, but
that requires coordination with all developers to minimize disruptions.
Separates various groups of files to be built in logical succession.
In each layer, the core module (target.c, nand.c, etc.) is built _after_
their helper modules (e.g. image.c, nand_ecc.c) but _before_ any of
their drivers (e.g. arm966e.c, mx3_nand.c).
This allows problems introduced at the bottom of the stack to result
in build failures as soon as possible, as the helpers and core should
wrap portions of them.
Remove useless forward declarations.
Moves command registrations to end of files.
Moves flash structure definitions to end of files.
Signed-off-by: Zachary T Welch <zw@superlucidity.net>
Remove useless forward declarations.
Moves command registrations to end of files.
Moves flash structure definitions to end of files.
Signed-off-by: Zachary T Welch <zw@superlucidity.net>
Remove useless forward declarations.
Moves command registrations to end of files.
Moves flash structure definitions to end of files.
Signed-off-by: Zachary T Welch <zw@superlucidity.net>
Remove useless forward declarations.
Moves command registration to end of file.
Moves flash structure definitions to end of files.
Changes a few references to global flash structure to local refs.
Signed-off-by: Zachary T Welch <zw@superlucidity.net>
Remove useless forward declarations.
Moves command registrations to end of files.
Moves flash structure definitions to end of files.
Signed-off-by: Zachary T Welch <zw@superlucidity.net>
Remove useless forward declarations.
Moves command registration to end of files.
Moves flash structure definition to end of files.
Signed-off-by: Zachary T Welch <zw@superlucidity.net>
Remove useless forward declarations.
Moves command registration to end of file.
Moves flash structure definition to end of file.
Signed-off-by: Zachary T Welch <zw@superlucidity.net>
Removes 'extern' keywords from function prototypes in the flash headers.
Wraps long lines to fit into 80 columns.
Adds multiple inclusion protection for s3c2xx_nand.h.
This patch changes the duration_* API in several ways. First, it
updates the API to use better names. Second, string formatting has
been removed from the API (with its associated malloc). Finally, a
new function added to convert the time into seconds, which can be
used (or formatted) by the caller. This eliminates hidden calls to
malloc that require associated calls to free().
This patch also removes the useless extern keyword from prototypes,
and it eliminates the duration_t typedef (use 'struct duration').
These API also allows proper error checking, as it is possible for
gettimeofday to fail in certain circumstances.
The consumers have all been chased to use this new API as well, as
there were relatively few cases doing this type of measurement.
In most cases, the code performs additional checks for errors, but
the calling code looks much cleaner in every case.
Antonio Borneo
Daniel Bäder
Øyvind Harboe
Spencer Oliver
richard vegh
Bradey Honsinger
David Brownell
Hans Peter Mortensn
Edgar Grimberg
Peter Korsgaard
Laurentiu Cocanu
Freddie Chopin
Piotr Esden-Tempski
Dean Glazeski
Eric Wetzel
Zachary T Welch
Mathias Kuester
lementec fabien