The 'help' text will become more verbose, so its entire text will be
far more than desired when you only borked your syntax. The usage
still allows the commands to be looked up for more help.
command_done() does not need to return an error, but it needed
Doxygen comment. Provide some for copy_command_context as well.
Note: this audit revealed some potential bugs with the command context
implementation. There was a reason that commands were added at the
end of the list. Shallow copying of command_context means that
the list is shared between them. And commands added at the top-level
before the pre-existing commands will not be available in the shared
context as they were before. Yikes!
Fortunately, this does not seem to occur in general use, as
'add_help_text' gets registered in startup.tcl and claims the first slot
in my own test cases. Thus, it seems that we have been masking the issue
for now, but it shows the need for further architectural improvement in
the core command module.
With the ability to defer 'init', users can access the help system while
still in CONFIG mode. This patch omits commands from the help and usage
list when they cannot be run in the current command mode, making it much
easier to see what can be done at a given time.
Adds 'noinit' command to prevent OpenOCD from running 'init' at the end
up startup, allowing it to be given from telnet or TCL. This provides
the old behavior by default, and users can add this command to their
scripts to get the new behavior.
Moves the telnet and TCL server startup to server_init(), moving their
respective command registration in to server_register_commands().
Adds proper error checking for these particular startup processes.
Moves the core server startup to openocd_main(), improving related error
checking and preparing to defer 'init'.
Rework gdb_init to create flexible APIs (gdb_target_add_{one,all}) and
static helper (gdb_target_start) for starting GDB services. Eliminates
duplicated code and provides general mechanisms for adding GDB services.
The 'init' command is updated to call the new API, and later patches can
decouple its policy of adding all targets therein.
Provides the new capability to use both piped and TCP servers when
multiple targets are defined. The first target fills the pipe, and
others will be started on TCP ports (unless disabled, i.e. gdb_port=0).
Add missing COMMAND_REGISTRATION_DONE.
For now the command syntax for zy1000 needs to be compatible
across 0.3/0.4, the world outside OpenOCD interfaces to
zy1000 using the old syntax. Post 0.4 release(0.4.1 even)
I'll switch to subcommand scheme.
Switch to subcommands post 0.3 lifecycle.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Streamline the loop by continuing as soon as we know there's no
work to be done; this lets us un-indent almost everything.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
When fetching all the registers, XScale was doing various stupid
things like calling number_to_mode() a few dozen times instead of
just once, and mapping access to each register three times (again,
instead of just once). Stop that.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Use the new mapping interfaces in the debug entry path.
SPSR and the banked registers now have smaller and faster
accessors ... use them.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Code other than main() may invoke "init". When it does so,
customized handlers may need to run ... so make sure the
command context state is updated before they do so.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Those commands presume support for the "classic" set of CPU
modes (FIQ, supervisor, IRQ, etc) ... which aren't supported
by the ARMv7-M or ARMv6-M architectures. They also presume
a "struct arm" base type, which this code doesn't use.
We haven't cleaned up the register handling enough to be able
to share any of those "base" methods.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Eliminate the monolithic tcl_target_func by registering each of its
commands using the new chained command registration mechanism.
Also chains the target's commands under the CPU command, though these
may not work properly without some further modification.
The 'target' command group was implemented using its own command
dispatching, which can be eliminated by using the new chained command
registration mechanism. This patch splits the jim_target() function
into individual handlers, which makes them to be visible to the help and
usage commands. These one-trick handlers are much easier to understand.
Splits bulk of the jtag_tap_configure into jtag_tap_configure_event,
removing three or four levels of indentation in the process.
The resulting code was stylistically improved in other ways, but it
should be functionally identical.
Moves the tertiary jim handlers and required static helpers to the top
of tcl.c, defining them in a new registration array that is chained in
both the top-level context and under the jtag command. The top-level
commands can be removed at some point in the future to reduce clutter.
Explodes the 'jtag' into separate command handlers, which are easier
to understand and extend. Makes the code much easier to understand,
though further simplifications are possible. This patch tries to
minimize the noise when viewed with 'git diff -w'.
Gives these commands improved built-in help and usage information.
Two 'rm' commands were implemented and registered. This removes the
version that would have never been called prior to refactoring the
command registration.
Adds checks for memory allocation failures. Started to use calloc()
instead of malloc()/memset(), but I got carried away. This kind of work
should be done throughout the tree, but it's almost hopeless at present.
Splits the check for a command's ability to run into a helper.
This also fixes a bug whereby commands that specified COMMAND_EXEC
were allowed to run during the configuration stage. This allowed
problematic commands to be called before 'init', defeating the intention
of specifying that command mode. With this change, the run_command()
helper denies access to handlers that should run only after 'init'
during the configuration stage.
Presently, commands registration taks a static handler data pointer.
This patch adds support for commands that require a dynamic pointer,
such as those registered in a dynamic context (e.g. subcommands for a
user-created 'foo.cpu' command). The command_set_handler_data will
update a command (group) to use a new context pointer, while the
CMD_DATA macro allows command handlers to access the value.
Jim handlers should find this value in interp->cmdPrivData.
Updates command registration to provide top-level handlers for all
commands, rather than falling back onto the 'unknown' command. Instead,
that same handler is registered for placeholders, providing the same
functionality under the root verb command name instead. This permits
users to implement their own 'unknown' function, and it resolves some
mind-bending breakage related to function object lookup while recursing.
Changes 'ocd_bounce' to call 'ocd_command' and 'ocd_help' from the
wrapper directly, rather than bouncing through their wrappers. This
prevents endless recursion caused by the above changes, whereby the
'command' wrapper's type check would blow the stack to hell and gone.
Adds 'ocd_bouncer' in startup.tcl that is called as a helper for
all command handlers, shrinking the embedded C wrapper to a mere stub.
Jim handlers are called directly, simple handlers get called with the
wrapper to capture and discard their output on error, and placeholders
call help directly (though the unknown handler still does this too).
It attempts to improve the quality of the error messages as well.
Adds the 'command' group handler, with the 'type' command producing
a string that tells whether the given command is 'native' (for Jim-based
command handlers), 'simple' (for simple built-in commands), 'group'
for command group placeholders, and 'unknown' if not found in the
command registration tables (e.g. core built-ins functions).
There is no DEBUG() macro; don't call one! Always at
least *parse* debug code, to help prevent such errors.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
In target_type.h it's documented that the target must be
halted for add_breakpoint() ... and with slight ambiguity,
also for its add_watchpoint() sibling. So rather than
verifying that constraint in the CPU drivers, do it in the
target_add_{break,watch}point() routines.
Add minor paranoia on the remove_*point() paths too: save
the return value, and print it out in in the LOG_DEBUG message
in case it's nonzero.
Note that with some current cores, like all ARMv7 ones I've
looked at, there's no technical issue preventing watchpoint or
breakpoint add/remove operations on active cores. This model
seems deeply wired into OpenOCD though.
ALSO: the ARM targets were fairly "good" about enforcing that
constraint themselves. The MIPS ones were relied on other code
to catch such stuff, but it's not clear such code existed ...
keep an eye out for new issues on MIPS.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Use the new "reset-assert" event; else SRST; else fail.
Tested on an OMAP3, using the event.
NOTE: still doesn't handle "reset halt". For some reason
neither VCR nor PRCR seemed effective; they held the value
that was written, but VCR didn't trigger debug entry when
the reset vector fired (maybe the vector needs configuring?)
and PRCR refused to hold the chip in reset until deassert()
could force the core into debug state.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
This defines a "reset-assert" event and a supporting utility
routine, and documents both how targets should implement it
and how config scripts should use it. Core-specific updates
are needed to make this work.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
When writing to a chip's "reset yourself" register, the ARM11 code
was reporting a spurious failure. Just don't bother checking for
correctly incremented pointers given single-unit writes ... it's
a bit faster that way too. (Reads should likely do the same thing.
For that matter, such checks are usually just a waste...)
Shrink an overlong parameter name, and associated lines'o'code.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
The command refactoring caused subcommand handlers to produce duplicate
output when run. The problem was introduced by failing to ensure all
such invocations went through a top-level "catcher" script, prefixing
the command name with the 'ocd_' prefix and consuming its results.
The fix is to ensure such a top-level "catcher" script gets created
for each top-level command, regardless of whether it has a handler.
Indeed, this patch removes all command registrations for sub-commands,
which would not have worked in the new registration scheme anyway.
For now, dispatch of subcommands continues to be handled by the new
'unknown' command handler, which gets fixed here to strip the 'ocd_'
prefix if searching for the top-level command name fails initially.
Some Jim commands may be registered with this prefix, and that situation
seems to require the current fallback approach. Otherwise, that prefix
could be stripped unconditionally and the logic made a little simpler.
The same problem must be handled by the 'help' command handler too,
so its lookup process works as intended.
Overall, the command dispatching remains more complicated than desired,
but this patch fixes the immediate regressions.
Move device argument parsing after check for number of arguments;
otherwise, calling this command without any arguments would access
argv[0] before checking whether it even existed.
Zachary T Welch
Øyvind Harboe
David Brownell
Marek Vasut
lementec fabien