Commit Graph

454 Commits

Author SHA1 Message Date
Tomas Vanek 390c9aca1f tcl at91samdXX.cfg: partially revert change 3722
Commit 25d7ba19c9 introduced a problem
with 'reset halt' due to setting srst_pulls_trst:

Error: cortex_m.c:595 cortex_m_halt(): can't request a halt while
  in reset if nSRST pulls nTRST

Sorry, I don't know why I overlooked it when I tested #3722.

Change-Id: I41e9473dd91a86d93cf3e78b1fbbdfe1dd188d83
Reported-by: Ladislav Laska <laska@kam.mff.cuni.cz>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3942
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2017-01-15 11:01:00 +00:00
Paul Fertser 7582e2fd28 tcl: target: imx5{1,3}: remove bogus tapenable command
This seems to be a leftover from borrowing from omap3* configs. Since
SJC is not enabling or disabling the DAP tap, and the tap is always
available, the extra tapenable command causes warnings on startup
(can't enable what's already enabled).

Change-Id: I7514436d565aa5b91876dbdab547956f36dcab77
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/3892
Tested-by: jenkins
2016-12-25 09:44:01 +00:00
Uwe Bonnes 49cac156bb stm32l0.cfg: Add examine-end event like on other STM32 targets.
Enable debug in standby/stop/sleep.
Stop watchdogs during halt.

Change-Id: I8383a191cd897118bd88bf78528d05943f3a368e
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/3882
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-12-08 17:09:47 +00:00
Owen Kirby c591f109c3 at91sam4: Add flash description and chipid for SAM4Cxx variants.
Chip ID and flash layout taken from
Atmel-11102F-ATARM-SAM4C32-SAM4C16-SAM4C8-SAM4C4-Datasheet_27-Mar-15
and tested on a SAM4C32-EK (rev A).

Change-Id: I68aae5b60994c0b5964ea9031d40bc76ba025675
Signed-off-by: Owen Kirby <oskirby@gmail.com>
Reviewed-on: http://openocd.zylin.com/3527
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-12-08 12:31:14 +00:00
Peter Lawrence ab9d92490c tcl: Support for Analog Devices ADSP-SC58x
target tcl to enable debugging of ARM Cortex-A5 on ADSP-SC58x

Change-Id: I378f8b94b7d6d6b9d0567985abc0e36aea7c8dea
Signed-off-by: Peter Lawrence <majbthrd@gmail.com>
Reviewed-on: http://openocd.zylin.com/3125
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2016-12-08 12:22:07 +00:00
Tomas Vanek 25d7ba19c9 tcl at91samdXX.cfg: update config to current OpenOCD status
Remove comment about workaround of not working 'reset halt' - not needed
as 'reset halt' is working as expected @ EDBG with srst_only.
Add srst_pulls_trst to reset_config as it no more triggers an error.

Change-Id: I47cf445690c46ccfb866900cddbfcaefc8649f82
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3722
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-12-08 12:18:52 +00:00
Harald Welte 75c3f4a25c AM335x: Disable watchdog on 'reset halt'
At least on my (phyCORE-AM335X) system, the AM335x watchdog
needs to be disabled to use OpenOCD for more than 6.5 seconds
after reset.

Change-Id: I3d883a9f572b0ccb92f9864853a00c372e39d7f2
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Reviewed-on: http://openocd.zylin.com/3391
Tested-by: jenkins
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-11-04 21:22:32 +00:00
Andreas Fritiofson d3445cd146 cfg: Don't check BS TAP IDCODE in STM32 configs
Instead of updating these regularly we can just accept any IDCODE for the
boundary scan TAP.

The only downside might be that it's not immediately obvious if you
source a config for the wrong type of STM32.

Change-Id: I96d4d81699a491b3a46de3f0d3fd078ffddad4e4
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/3385
Tested-by: jenkins
2016-11-04 21:18:21 +00:00
Tomas Vanek 6d5b4d709c flash Kinetis: Detect RESET/WDOG loop, fix detection of secured MCU
Kinetis driver checks MDM STAT register to detect secured state of MCU.
Original version often reported a blank device as secured one.
Change #3010 has not fixed all false reports.
After changes in arm_adi_v5 infrastructure secured devices was not detected
at all.

New algorithm uses multiple MDM STAT reads and counts MDM_STAT_SYSSEC and
MDM_STAT_FREADY bits. Both secured MCU and MCU locked-up in RESET/WDOG loop
are detected reliably.

Detection is run in both kx.cfg and klx.cfg from examine-start event,
not examine-end as before. Event is configured only for non hla adapter.

Minor fix in klx.cfg: commented out adapter_khz 24000 in reset-init.
Such frequency is not supported in VLPR CPU mode and with JTAG.

Change-Id: I2ec2b68c45bde9898159cd15fbdcbcfa538c41d9
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3547
Tested-by: jenkins
Reviewed-by: Steven Stallion <stallion@squareup.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14 09:10:06 +01:00
Uwe Bonnes 4c670b9d64 target/stm32f4x.cfg: Add STM32F410/F412/F469.
Taken from git://git.ac6.fr/openocd commit e8ed67c42227b7072a1e7

Change-Id: Iac106d4823123eaa96f16a975e7ecbcb24189924
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/3377
Tested-by: jenkins
Reviewed-by: Stian Skjelstad <stian@nixia.no>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-14 00:47:52 +01:00
Uwe Bonnes 66d29eb6e3 tcl/target/stm32f4x.cfg: Use Workareasize of smallest possible device.
Increase workareasize when it is know we have a larger device.

Change-Id: Ieaee92e7cd25cc201989f14de122349698871412
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/3378
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-13 23:34:29 +01:00
Uwe Bonnes 20466e5374 tcl/target/stm32l4x.cfg: Reduce adapter speed before reset.
Change-Id: I200286c0b980369f74e8f1e497bc5e565ddb616d
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/3366
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-08-13 09:26:42 +01:00
Tomas Vanek 306e04e825 psoc4.cfg: fixed typo in message, add a hint
PSoC4 design prevents reset halt/init with standard/low level
SWD adapter if hw reset line configured. Give user hint
to use 'reset_config none' in such case.

Change-Id: I0ca2c46b8575829b0013fd151f2eb63963d66653
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/3617
Tested-by: jenkins
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-08-13 09:02:47 +01:00
Uwe Bonnes 406f4d1c68 stm32f7x.cfg: Fix expected JTAG id.
Change-Id: Icd21b9ac5f50094262f30db431d8a775a0d263ca
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/3512
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-31 16:21:23 +01:00
Andreas Färber 08cdb58f05 tcl/target: Add PSoC 5LP config
Tested with CY8CKIT-059 and soldered-on J5 connector.

Change-Id: I687786179f2df354321a18d26330c60908461e0b
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3410
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-22 15:47:34 +01:00
Andreas Färber 679ae2a98d tcl/target: Add config for TI MSP432P4xx
Tested with TI MSP-EXP432P401R LaunchPad, via both on-board XDS110-ET (swd)
and external J-Link (jtag).

Change-Id: Ic0caa8516a155754b1c88a04acc8d3c511d9a5f7
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3485
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-20 21:40:44 +01:00
Andreas Färber 0c8ec7c826 Fix spelling of ARM Cortex
It's Cortex-Xn, not Cortex Xn or cortex xn or cortex-xn or CORTEX-Xn
or CortexXn. Further it's Cortex-M0+, not M0plus.

Cf. http://www.arm.com/products/processors/index.php

Consistently write it the official way, so that it stops propagating.
Originally spotted in the documentation, it mainly affects code comments
but also Atmel SAM3/SAM4/SAMV, NiietCM4 and SiM3x flash driver output.

Found via:

  git grep -i "Cortex "
  git grep -i "Cortex-" | grep -v "Cortex-" | grep -v ".cpu"
  git grep -i "CortexM"

Change-Id: Ic7b6ca85253e027f6f0f751c628d1a2a391fe914
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3483
Tested-by: jenkins
Reviewed-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-20 21:38:03 +01:00
Uwe Bonnes 44a6362b20 stm32l4x.cfg: Fix RCC_CR address.
Change-Id: I7a63d24a495e28bc01b5e6603f15b88e075878b8
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/3489
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-05-20 21:13:52 +01:00
Andreas Färber 44d2c7b416 flash/nor: Add Infineon XMC1000 flash driver
The XMC1000 family uses a very different flash interface from XMC4000.

Tested on XMC 2Go and XMC1100 Boot Kit.

Change-Id: I3edaed420ef1c0fb89fdf221022c8b04163d41b3
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3418
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Tested-by: jenkins
2016-05-05 07:50:59 +01:00
Ivan Meleca 5396ec5dcc flash: Added support for Freescale Kinetis KE family.
Tested with MKE04Z8VTG4, MKE02Z64VLC4 and MKE02Z64VLD2.

Change-Id: I606e32a2746a3b96d3e50f3656ba78d40c41c1ea
Signed-off-by: Ivan Meleca <ivan@artekit.eu>
Reviewed-on: http://openocd.zylin.com/3380
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-05-04 22:32:23 +01:00
Andreas Färber 43ff5acd45 flash: New Spansion FM4 flash driver
The Spansion FM4 family of microcontrollers does not offer a way to
identify the chip model nor the flash size, except for Dual Flash vs.
regular layout. Therefore the family is passed as argument and
wildcard-matched - MB9BFx6x and S6E2CC families are supported.

Iterations showed that ...
1) Just doing the flash command sequence from SRAM loader code for each
half-word took 20 minutes for an 8 KB block.
2) Doing the busy-wait in the loader merely reduced the time to 19 minutes.
3) Significant performance gains were achieved by looping in loader code
rather than in OpenOCD and by maximizing the batch size across sectors,
getting us down to ~2 seconds for 8 KB and ~2.5 minutes for 1.1 MB.
(Tested with SK-FM4-176L-S6E2CC-ETH v11, CMSIS-DAP v23.)

gcc, objcopy -Obinary and bin2char.sh are used for automating the
integration of hand-written assembler snippets.

Change-Id: I092c81074662534f50b71b91d54eb8e0098fec76
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2190
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-29 19:40:20 +00:00
Alexander Kurz 4d68bd1ebf tcl/target/stm32f4: fix: reduce adapter speed before reset
The reset-init hook for this target speeds up the CPU clock and JTAG adapter
speed. When the target is reset running with high adapter speed, a series of
warnings "DAP transaction stalled (WAIT) - slowing down" will be generated
since the adapter speed is not reduced to fit the slower CPU speed.
Fix: reduction of the adapter speed before a reset is performed.

Change-Id: Iabfc8e3f70311e0e71c8eed09b8a37fcbed9c58d
Signed-off-by: Alexander Kurz <akurz@blala.de>
Reviewed-on: http://openocd.zylin.com/3365
Tested-by: jenkins
Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29 19:16:07 +00:00
Ivan De Cesaris a4ce9a2c71 quark: add Intel Quark mcu D2000 support
Add support for the Intel Quark mcu D2000 using the new quark_d2xx
target.

Changes to the lakemont part are needed for the D2000 core and
backwards compatible with the X1000 one.

Change-Id: I6e1ef5a5d116344942f08e413965abd3945235fa
Signed-off-by: Ivan De Cesaris <ivan.de.cesaris@intel.com>
Reviewed-on: http://openocd.zylin.com/3199
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-13 22:55:41 +00:00
Bogdan Kolbov afbad69d97 flash/nor/niietcm4: minor fixes
niietcm4_write() buffer padding:
add correct buffer padding for 16 bytes.

Args check in FLASH_BANK_COMMAND_HANDLER():
first version of the driver had 7 args, current - 6. This patch will fix
error when flash is rejected (current k1921vk01t.cfg has flash bank init
with 6 args).

Timeouts in flash flag checking procedure:
increase timeouts in niietcm4_opstatus_check() and niietcm4_uopstatus_check()
cause there were problems in some hardware configurations.

JTAG ID:
wrong id in k1921vk01t.cfg replaced with right one.

Signed-off-by: Bogdan Kolbov <kolbov@niiet.ru>
Change-Id: I84296ba3eb4eeda4d4a68b18c94666f1269a500f
Reviewed-on: http://openocd.zylin.com/3171
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-01-29 05:41:53 +00:00
Matthias Welwarsky c520fdf902 am437x: always use highest possible JTAG clock.
With DAP WAIT support, it's no longer necessary to start with slow
JTAG clock.

Change-Id: I2cb62c44752b27e6854637e8073e9f9501f5a660
Signed-off-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-on: http://openocd.zylin.com/3190
Tested-by: jenkins
Reviewed-by: Felipe Balbi <balbi@ti.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-01-22 13:03:39 +00:00
Matthias Welwarsky 0627bc3b43 AM335x: allow simultaneous debugging of A8 and M3 cores
This patch fixes the tap order so that it matches the actual jtag
chain when all taps are enabled. It also introduces a variable
DEFAULT_TAPS that can be set outside of this script, e.g. on the
command line, to specify which taps are to be enabled on init.
Lastly, a new debug target "am335x.m3" is added so that the Wakeup-M3
can be selected for debugging.

Change-Id: Iccf177fda8d5e3737b1b2bb8fd1eaa7d3262ed9f
Signed-off-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-on: http://openocd.zylin.com/3013
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-12-29 21:16:54 +00:00
Andreas Färber a12f1cf34c tcl/target: Add Renesas S7G2 config
Tested with Renesas DK-S7G2M v3.0 board.

Change-Id: Ia6acaf70271ed4eb7bc4e921552cbd2ff83f6acb
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3169
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-12-29 20:38:05 +00:00
Bogdan Kolbov ae2142d5a2 niietcm4: support for NIIET's Cortex-M4 microcontrollers
This adds docs, example config, flash driver.
Driver is only supports K1921VK01T model for now.

Change-Id: I135259bb055dd2df1a17de99f066e2b24eae1b0f
Signed-off-by: Bogdan Kolbov <kolbov@niiet.ru>
Reviewed-on: http://openocd.zylin.com/3011
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-26 12:17:25 +00:00
Andreas Färber 2594c23d78 tcl/target: Add Nordic nRF52 config
Base config without flash support for now.

Change-Id: I96a5b6ad35e00dc706177ea9dbdffc384ae7f62b
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3110
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-11-20 18:28:40 +00:00
Tomas Vanek 751e2454bf at91samd: handle reset run/halt in DSU
Atmel introduced a "Device Service Unit" (DSU) that holds the CPU
in reset if TCK is low when srst (RESET_N) is deasserted.
Function is similar to SMAP in ATSAM4L, see http://openocd.zylin.com/2604

Atmel's EDBG adapter handles DSU reset correctly without this change.

An ordinary SWD adapter leaves TCK in its default state, low.
So without this change any use of sysresetreq or srst
locks the chip in reset state until power is cycled.

A new function dsu_reset_deassert is called as reset-deassert-post event handler.
It optionally prepares reset vector catch and DSU reset is released then.

Additionally SWD clock comment is fixed in at91samdXX.cfg and clock is
lowered a bit to ensure a margin for RC oscillator frequency deviation.
adapter_nsrst_delay 100 is commented out because is no more necessary after
http://openocd.zylin.com/2601

Change-Id: I42e99b1b245f766616c0a0d939f60612c29bd16c
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/2778
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-11-20 18:26:05 +00:00
Uwe Bonnes f3be0f6071 stm32l4: Add cpu and stm32l4discovery board configuration.
Change-Id: I20d3fcee04516eb3b9bb22933e7e366eed0c0b2e
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2942
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-12 20:21:06 +00:00
Uwe Bonnes 6b32fe4124 tcl: Add default hooks for STM32F0x
Keep clocks running in low power modes. Stop watchdogs from interfering
with the debug session. Set up PLL and increase clock at reset init.

Change-Id: I232d769d893d54e4ea9411c46c56b19587b69919
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2707
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-12 20:20:33 +00:00
Uwe Bonnes d8ac9d5ac5 tcl: Add default hooks for STM32F4x
Set up PLL and increase clock at reset init.

Change-Id: I611bc6fb7c0c5afd8ed3f4ad8e64f3c7b981d31c
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2609
Tested-by: jenkins
Reviewed-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-12 15:24:19 +00:00
Uwe Bonnes c4b8c74140 stm32xxx.cfg: Only touch IWDG and WWDG in DBGMCU_APB1_FZ.
Change-Id: Ie0298c8e73bebeccc9346534d63aab4cae49e4f7
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/3104
Tested-by: jenkins
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-12 15:03:40 +00:00
Rémi PRUD’HOMME c3ea15dc62 Add config files for STM32F7-DISCO and STM327[4|5]6G-EVAL.
Change-Id: I0803939f0ab1de97e544ca0f1257daac11fb50de
Signed-off-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com>
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2754
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-12 15:03:18 +00:00
Jeff Ciesielski 33b048d456 flash: New driver for XMC4xxx microcontroller family
This is a complete flash driver for the Infineon XMC4xxx family of
microcontrollers, based on the TMS570 driver by Andrey Yurovsky.
The driver attempts to discover the particular variant of MCU via a
combination of the SCU register (to determine if this is indeed an
XMC4xxx part) and the FLASH0_ID register (to determine the variant).
If this fails, the driver will not load.
The driver has been added to the README and documentation.

Tests:
* Hardware: XMC4500 (XMC4500_relax), XMC4200 (XMC4200 enterprise)
* SWD + JTAG
* Binary: 144k, 1M

Note:
* Flash protect only partly tested. These parts only allow the flash
  protection registers (UCB) to be written 4 times total, and my devkits
  have run out of uses (more on the way)

Future Work:
* User 1/2(permalock) locking support via custom command
* In-memory flash loader bootstrap (flashing is rather slow...)

Change-Id: I1d3345d5255d8de8dc4175cf987eb4a037a8cf7f
Signed-off-by: Jeff Ciesielski <jeffciesielski@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2488
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-11-11 12:08:35 +00:00
Morgan Quigley 42c24acebd flash: driver for Atmel SAMV, SAMS, and SAME
This is a driver for the Atmel Cortex-M7 SAMV, SAMS, and SAME.
I started with the at91sam4.c driver and then restructured it
significantly to try to simplify it and limit the functionality
to just a flash driver, as well as to comply with the style guide.

Change-Id: I5340bf61f067265b8ebabd3adad45be45324b707
Signed-off-by: Morgan Quigley <morgan@osrfoundation.org>
Reviewed-on: http://openocd.zylin.com/2952
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2015-11-10 20:27:09 +00:00
Morgan Quigley bdd0440508 tcl/target: add config for Atmel SAMV / SAMS / SAME
Change-Id: Ia90a533fe3d07f9a67ce2da815146c612d80dd1b
Signed-off-by: Morgan Quigley <morgan@osrfoundation.org>
Reviewed-on: http://openocd.zylin.com/3091
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2015-11-10 20:26:29 +00:00
Jim Norris fad64c6180 tcl/target: Add configuration for NXP LPC4370 processor
New configuration for NXP LPC4370 which consists of a Cortex-M4
and two Cortex-M0 cores.

Change-Id: I9918e3ff33218a14a99e4bbab9dce2e7b45b4d96
Signed-off-by: Jim Norris <u17263@att.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2124
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-05 22:27:04 +00:00
Oleksij Rempel d651d7109f tcl/target|board: add config Atheros ar2315
Add configs for Atheros ar2313 MIPS based WiSoC and
board based on this chip: La Fonera FON2200

Change-Id: Ibfdbfc9c2beca6cf436c9ee5e493b08bfb55ac85
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/2839
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-11-03 22:18:30 +00:00
Oleksij Rempel a9f2761083 tcl/target|board: add config Atheros ar2313
Add configs for Atheros ar2313 MIPS based WiSoC and
board based on this chip: Netgear WP102

Change-Id: Id93957b5d5851a272f15be35f9f448a9ce6d8a08
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/2835
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-11-03 22:18:27 +00:00
Andreas Färber 951061c972 lpc8xx: Allow CHIPNAME override
Default to lpc8xx as before, but allow setting the actual CHIPNAME.

Change-Id: I5a48fa75c640440a0d4c3f2858653e94bed846d2
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3084
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-11-03 21:45:28 +00:00
Andreas Färber 2cbbe9abf5 tcl/target: Add LPC4357 config
Reuse the flashless LPC4350 as base and amend it as necessary.
The LPC43x7 have 2x 512 KB of flash.

Change-Id: Ia7ffbc7101023479971984b839f171ed4be6b089
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3037
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30 13:14:12 +00:00
Andreas Färber 11eff9baea fm4: Add JTAG support
Add support for the JTAG TAPID found on SK-FM4-U120-9B560-MEM V1.1.0 board.

Change-Id: Idbfe28927e0c549f0c89c29904d23971281927c9
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3039
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30 12:52:50 +00:00
Andreas Färber 6b31338625 tcl/target: Prepare FM4 MB9BFxxx family
It is found on the SK-FM4-U120-9B560-MEM V1.1.0 among others.

Change-Id: I4c708c9391e954cbbc8d0860a2a2dbd264aea865
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3008
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30 12:52:14 +00:00
Andreas Färber 2acf970ab9 fm4: Split out S6E2CC family config
Its memory layout is different from MB9BFxxx.

Change-Id: I39c9f9cf582cd182971a9f83bb88c7a18da6cf15
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3007
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30 12:51:37 +00:00
Andreas Färber 385dde8860 tcl/target: Add Exynos5250 config
Change-Id: Ia673d3f16b2238d5af8fbeff2d57c6cf27dcffb1
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/3080
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30 12:42:06 +00:00
Andreas Färber 9af662f95d tcl/target: Add config for XMOS XS1-XAU8A-10's ARM core
The XS1-XAU8A-10 has 8 xCORE cores and one ARM core.
This config represents the ARM Cortex-M3 core, which is apparently
Silicon Labs EFM32 Giant Gecko IP.

Change-Id: I998360f096c759d2e274d96c1ca2e0450ba61146
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-on: http://openocd.zylin.com/2762
Tested-by: jenkins
Reviewed-by: Oleksij Rempel
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-10-30 12:39:42 +00:00
Nemui Trinomius 33e406824c numicro: Integrate Nuvoton NuMicro flash driver.
Flash driver "mini51.c" and "nuc1x.c" are same target MCU.
This patch integrates each driver and functions,
and makes into new "NuMicro" flash driver.

Change-Id: Ifff5c1cfdd265acca0f489631695be9194fa144c
Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-on: http://openocd.zylin.com/2794
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-09-30 22:12:39 +01:00
Ivan Buliev 03f46e3688 flash: Analog Devices ADuCM360 support
A target config and a simple flash driver for the ADuCM360 microcontroller.
The EEPROM of the chip may be erased and programmed.

Change-Id: Ic2bc2f91ec5b6f72e3976dbe18071f461fe503b8
Signed-off-by: Ivan Buliev <i.buliev@mikrosistemi.com>
Reviewed-on: http://openocd.zylin.com/2787
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: jenkins
2015-09-30 22:12:16 +01:00