Read PS from EPS[debuglevel] during fetch such that it reflects the correct value when read via telnet (not just via gdb_server).
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I8504f68989bc6d5fe451a8cb69d01c86f4ec0100
Reviewed-on: https://review.openocd.org/c/openocd/+/7195
Tested-by: jenkins
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This updates the FreeRTOS module to use the M4F FPU stacking also for the
FPV5_SP and FPV5_DP FPUs, which are found on the Cortex-M7. The FPUs are
in fact different than the FPV4_SP found on the M4, but the register
stacking is the same.
Signed-off-by: Frank Dischner <frank.dischner@gmail.com>
Change-Id: I74c45d2cfb55f55e6c557f2450068ad3c2fe9497
Reviewed-on: https://review.openocd.org/c/openocd/+/6939
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The method soft_reset_halt is optional; no need to add an
empty function.
Remove mips_mips64_soft_reset_halt() and move the TODO comment
in struct target_type.
Change-Id: Id541a75e7a08645568961d59b73a120c2238701f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7184
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Read buffer is sized for 32-bit APB version of PWRSTAT/PWRCTL registers. Initialize to zero so 8-bit JTAG register mirrors are accurate.
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I81310649fa7180893d0188aab3c8a14315aaea0a
Reviewed-on: https://review.openocd.org/c/openocd/+/7183
Tested-by: jenkins
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use the new "adapter gpio" commands to configure the GPIOs used by the
bcm2835gpio driver. The driver supports only 1 chip (gpiochip0).
The reset function now honours the srst_open_drain and trst_open_drain
options.
Signed-off-by: Steve Marple <stevemarple@googlemail.com>
Change-Id: I5b6c68b16362000cf5141a83394549d2bf3af108
Reviewed-on: https://review.openocd.org/c/openocd/+/7123
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The /dev/mem file descriptor can be closed without invalidating the
mappings so close as soon as possible.
munmap() all memory, either on error or from quit.
Signed-off-by: Steve Marple <stevemarple@googlemail.com>
Change-Id: I2b6a8365f554e332520fa77ccf076188083a932f
Reviewed-on: https://review.openocd.org/c/openocd/+/7122
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
New GCC reports 5 warning:
src/jtag/drivers/ep93xx.c: In function 'set_gonk_mode':
src/jtag/drivers/ep93xx.c:123:47: warning: pointer of type 'void *' used in arithmetic [-Wpointer-arith]
123 | devicecfg = *((volatile int *)(syscon + 0x80));
| ^
src/jtag/drivers/ep93xx.c:124:35: warning: pointer of type 'void *' used in arithmetic [-Wpointer-arith]
124 | *((volatile int *)(syscon + 0xc0)) = 0xaa;
| ^
src/jtag/drivers/ep93xx.c:125:35: warning: pointer of type 'void *' used in arithmetic [-Wpointer-arith]
125 | *((volatile int *)(syscon + 0x80)) = devicecfg | 0x08000000;
| ^
src/jtag/drivers/ep93xx.c: In function 'ep93xx_init':
src/jtag/drivers/ep93xx.c:182:46: warning: pointer of type 'void *' used in arithmetic [-Wpointer-arith]
182 | gpio_data_register = gpio_controller + 0x08;
| ^
src/jtag/drivers/ep93xx.c:183:56: warning: pointer of type 'void *' used in arithmetic [-Wpointer-arith]
183 | gpio_data_direction_register = gpio_controller + 0x18;
| ^
Change pointer type to allow pointer arithmetic.
Change-Id: Idd78a7156bdf99df2624043e924b8e54a0588ace
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7180
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Commit c7eaaf6204 ("openocd: prepare for jimtcl 0.81 'expr'
syntax change") replaces the jimtcl command "expr" with an openocd
version that detects the TCL syntax change and prints a warning.
The openocd "expr" command will be dropped after v0.12.0,
One side effect is that openocd invokes polling the target after
every openocd command, causing scripts that use several "expr"
commands to run much slower; see [1].
The proper fix would require openocd to invoke polling only at the
time period deadline, instead of at each command. Such fix is too
risky to be applied now, due to short time before v0.12.0-rc1.
As a temporarily workaround, let openocd to detect the "expr"
command and skip the polling.
This will be dropped together with the openocd "expr" command.
Change-Id: I8151aa28694817001046165a15475d64896f985e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: https://sourceforge.net/p/openocd/tickets/362/ [1]
Fixes: c7eaaf6204 ("openocd: prepare for jimtcl 0.81 'expr' syntax change")
Reviewed-on: https://review.openocd.org/c/openocd/+/7174
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Symbols that are not used outside the file should not be exported
and should be declared as static.
Change-Id: Icbe7f7bce287b903edec9dc9db3370722c51fbd5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7173
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Variables should not be declared in the include file, otherwise
multiple include will cause multiple instances.
Move the declaration in the C file and make it static.
Change-Id: I8b4884cba643a792a78df4e123aa324b19d92279
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7172
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Symbols that are not used outside the file should not be exported
and should be declared as static.
Move the existing comments to the static declarations.
Change-Id: Idf208e3fda4b3f8df789553cf03ebf5f20d811bb
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7170
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Tim Newsome <tim@sifive.com>
Tested-by: jenkins
Symbols that are not exported should be declared as static.
Change-Id: I6a059080bbba9b3559d26c641b217be8be3b199e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7169
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Symbols that are not exported should be declared as static.
Change-Id: I2475524f4c14520e3163572560f4a9f276356ed5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7168
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Symbols that are not exported should be declared as static.
Change-Id: Ieb627f7f896e4663b0d5b18c4ab1853b39d23d03
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7167
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-by: Ian Thompson <ianst@cadence.com>
Tested-by: jenkins
Symbols that are not exported should be declared as static.
Change-Id: Ie3bd17535c8cb2a0fec5d3bedfe7de3e0a702613
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7166
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Symbols that are not exported should be declared as static.
Change-Id: I6224ae89ebda3230dfee2413e3823be9b8716bba
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7165
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The function set_log_output() has never been used after the drop
of eCos build with commit 39650e2273 ("ecosboard: delete
bit-rotted eCos code") in 2012.
Drop it!
Change-Id: I070b688061776c7ced5db18f738d78a4a7623726
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7164
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
For some configurations, notably on DAP systems, resolve issue where single-stepping does not always transition into the HALTED state.
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I053f4eaffad8c3228878ba87580ada640e4bd2fe
Reviewed-on: https://review.openocd.org/c/openocd/+/7150
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
- Enable ADIv5 DAP systems via JTAG or SWD transport
- Select correct PWRCTL/PWRSTAT bits for XDM/APB
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I5894210c804f85075da868d0cfc6fb20b589d99f
Reviewed-on: https://review.openocd.org/c/openocd/+/7144
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
We have left the camelcase symbols *xPSR* for some time, to avoid
any conflict with possibly pending patches in gerrit.
With the approaching v0.12.0-rc1, it's time to revisit it.
The patches in gerrit that conflict with this rename are all not
merge-able due to conflicts or due to negative review.
Drop these CamelCase symbols.
Change-Id: Ifbac4c1df9cc55994e024971a2aaebeed2ea4ed3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7155
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Without the help of checkpatch, some CamelCase symbol passed
through the filter of maintainer's review.
Drop them.
Change-Id: If5fb07b2ffb89e853dd2a61f20d4134aa6e20d24
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 48f267d4ad ("flash/stm32l4x: avoid using magic numbers for device ids")
Fixes: 5ab74bde06 ("semihosting: User defined operation, Tcl command exec on host")
Reviewed-on: https://review.openocd.org/c/openocd/+/7154
Tested-by: jenkins
Use indirect enum IDs to access XDM registers in preparation for supporting both NAR (JTAG) and APB (DAP). No new clang static analysis warnings.
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I0b742fe4661ff3cf609454b8650493d141a1e1ff
Reviewed-on: https://review.openocd.org/c/openocd/+/7143
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
As a follow-up of talks between JEDEC and STMicroelectronics,
JEDEC agrees to let OpenOCD project including the manufacturer's
identification code list extracted from JEDEC JEP106 document and
to let OpenOCD being updated regularly using the future JEDEC
JEP106 document versions. JEDEC requires OpenOCD to report the
origin of the JEDEC JEP106 manufacturer's identification code list
together with the JEDEC copyright.
As agreed with JEDEC, add in the file jep106.inc:
- the SPDX tag with the GPL license of the OpenOCD project;
- the JEDEC copyright;
- the text provided by JEDEC reporting the origin of the JEDEC
JEP106 manufacturer's identification code list.
While there:
- add a line reporting the version of the JEP106 document that was
used for the current code list extraction;
- remove the obsolete comment, as the script for extraction is not
working anymore; keep the script as example.
Change-Id: Iaa76716db14e15ffca04fcf7d8c27bb85a27ba10
Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7147
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The full text of the license is already available in the file
LICENSES/preferred/BSD-2-Clause
and there is no need to replicate it in the source code.
Remove the BSD-2-Clause boilerplate but, preserved the copyright
notice because it provides the info on the copyright holder.
Change-Id: I162aa4ad06b551f1a71a28d049cb797ee8ab5a01
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7146
Tested-by: jenkins
Reviewed-by: Jacek Wuwer <jacekmw8@gmail.com>
In the app-trace module we are polling the target in the while loops
outside of the server.c
In that loops, we need to catch ctrl+c signal by checking shutdown_openocd
status
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Id87c709a01470bf6d3642078b160a68ca85f4406
Reviewed-on: https://review.openocd.org/c/openocd/+/7142
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested with an PLUS-F5270 board which uses the MM32F5277E9PV.
Signed-off-by: iysheng <iyysheng@gmail.com>
Change-Id: Icb75ae8337fdc6fa60e39d3d74dd8bc163707bdd
Reviewed-on: https://review.openocd.org/c/openocd/+/7136
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
kinetis.c:994:61: error: '%u' directive output may be truncated
writing between 1 and 10 bytes into a region of size 4
[-Werror=format-truncation=]
tested with scan-build-14
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I72d141a3f8e19ca3596beee2be8434fc8492946f
Reviewed-on: https://review.openocd.org/c/openocd/+/7140
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Scan-build of target/xtensa/ has no clang analyzer warnings from xtensa source files.
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I11a125c923ece9a6fd0d9ee1698f742f88ee5cab
Reviewed-on: https://review.openocd.org/c/openocd/+/7141
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
While on it rename misleading write_algorithm_sp to write_algorithm_stack
and change messages referring 'stack pointer' instead of stack.
No functional change.
Change-Id: Ibb9897d3f01734812ed0f8bc8cd43b935a573f8a
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7132
Tested-by: jenkins
Reviewed-by: Salvatore Giorgio Pecorino <salvatore-giorgio.pecorino@st.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
FLASH_MAX_ERROR_STR is not used since commit 815c3b3533
(merged in ~2008)
Change-Id: Ic117a2e3d22235c31dc14533b6564ebf5a13ae58
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7121
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The value of struct flash_driver::command can be NULL when the
flash driver does not need to add any new command.
Remove empty command definitions.
Change-Id: I5413967d4069030234469822d24e9825425ae012
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7120
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
The change 6363: Call poll at a fixed interval
switched from target_call_timer_callbacks() to target_call_timer_callbacks_now().
It breaks the timing as all timers callbacks are called every time
one timer expires.
Revert this part of change and use target_call_timer_callbacks().
Fixes: db16b3dc5b (Call poll at a fixed interval.)
Change-Id: Ib5b7774de9694d40c55d2a4109d0d1582fc5008b
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7118
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Since commit 88f429ead0
5321: target/cortex_m: faster reading of all CPU registers
debugging with a kitprog adapter freezes at debug entry.
How to replicate:
openocd -f interface/kitprog.cfg -f target/psoc4.cfg
Connect to telnet server.
Make sure the target is running:
resume
Halt the target:
halt
Without this patch OpenOCD freezes in kitprog_hid_command()
in library call hid_write().
Reduce the number of SWD transactions sent in one USB bulk write
as a workaround, simply use shorter buffer.
For details see the comment in src/jtag/drivers/kitprog.c
Change-Id: I0116894d5ebf1655f6011f0d35acdbbc178cd48c
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7107
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
When printing memory sizes standard ISO 80000-1 prefixes should be used.
Also a space should be added between any number and its unit according
to papers publication rules.
Change-Id: Id1d35e210766b55c201de4e80ac165d8d0414d0a
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/6416
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Fix Unused code Dead assignment at line 657
Fix Memory error Double free at line 2851
Fix Memory error Memory leak at line 2530
Fix error: 'a3' may be used uninitialized at line 758
Fix error: '%04x' directive writing between 4 and 8 bytes
into a region of size 5 at line 2471
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I0382a622bc7c4108a335fd741816577e79240397
Reviewed-on: https://review.openocd.org/c/openocd/+/7137
Tested-by: jenkins
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Generic Xtensa LX support extends the original Espressif/Xtensa
patch-set to support arbitrary Xtensa configurations, as defined in
a core-specific .cfg file. Not yet fully-featured. Additional
functionality to be added:
- Xtensa NX support
- DAP/SWD support
- File-IO support
- Generic Xtensa multi-core support
Valgrind-clean, no new Clang analyzer warnings
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I08e7bf8fa57c25b5d0cb75a1aa7a2ac13a380c52
Reviewed-on: https://review.openocd.org/c/openocd/+/7055
Tested-by: jenkins
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Also used type helper (PRId64) to specify format of int64_t
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: I594863eab594aff621c26fefcc69a1872e9730ee
Reviewed-on: https://review.openocd.org/c/openocd/+/7111
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Some files have author info some doesn't. For the consistency we removed all.
Signed-off-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Change-Id: Ie6f1ec012302e3a954c75c5106f12820722cb715
Reviewed-on: https://review.openocd.org/c/openocd/+/7104
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Ian Thompson
Toms Stūrmanis
Frank Dischner
Antonio Borneo
Steve Marple
Antonio Borneo
Marc Schink
Erhan Kurubas
iysheng
Tim Newsome
Tomas Vanek
Paul Fertser
MadSquirrel