Checkpatch triggers the error
ERROR:RETURN_VOID: void function return statements are not
generally useful
Fix it!
Change-Id: I72d9fb8242d6a91c0aa481d5d023f0359c76a5ec
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8492
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Checkpatch triggers the error
ERROR:OPEN_BRACE: open brace '{' following function
definitions go on the next line
Fix it!
Change-Id: I0ce4585a6507eca094b82cdabdecf6fdbe7923b1
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8491
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Fix only minor additional checkpatch issue (spacing and line
length).
Change-Id: I4f936ffc4cedb153afa331cd293b08f4c913dc93
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8482
Tested-by: jenkins
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Fix only minor additional checkpatch issue (spacing and line
length).
Change-Id: I2c1ef03bbc828112cc5bea89463cff9fc0c1e94f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8481
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Fix only minor additional checkpatch issue (spacing and line
length).
Use Checkpatch-ignore below for the function pointers in the file
'armv7a_cache_l2x.h' that do not assign the identifier names to
the function arguments.
Most of these struct are unused and should be fixed or dropped.
Checkpatch-ignore: FUNCTION_ARGUMENTS
Change-Id: I8f27e68eb3502e431c1ba801b362358105f9f2dc
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8480
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Conversion done with
checkpatch --fix-inplace -types UNSPECIFIED_INT
Ignore the cast as they could be better addressed.
Fix only minor additional checkpatch issue (spacing and line
length).
Change-Id: Id808747855a02052f3738e2d232bff4dd99b27f1
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8479
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
Change the type to 'struct target::smp' and to the initialization
variable 'smp_group'.
Change-Id: I5f5a30a796aaf4e0014a38e81abdf4fb4afbdf48
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8478
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
Detected while converting 'unsigned' to 'unsigned int'.
Use the correct conversion string for stdint values.
Change-Id: I99f3dff4c64dfd7acf2bddb130b56e9ebe1e6c60
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8477
Tested-by: jenkins
Change order of dsp register name array and removed hi0 and lo0
to comply with gdb definition of dsp in mips-dsp.xml, the regs
name array is now mapping corresponding dsp accumulator names
onto `mips32_regs` and `core_regs` instead of mapping to instr
arrays in dsp functions.
feature now requires a place to store cached dsp registers.
Add dsp registers to reg_list for gdb to access them.
Add dsp module enable detection to avoid DSP Disabled exception
while reading dsp accumulators.
Add dsp register reading procedure in `mips32_pracc_read_regs`
and writing procedure in `mips32_pracc_write_regs`.
Change-Id: Iacc335da030ab85989922c81aac7925b3dc17459
Signed-off-by: Walter Ji <walter.ji@oss.cipunited.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8476
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
The field 'struct chibios_chdebug::ch_version' is 16 bits wide, so
using le_to_h_u32() and be_to_h_u32() overflows in the following
fields of the struct.
Restrict the endianness conversion to 16 bits and use the target
endianness dependent target_buffer_get_u16().
Convert the 'struct chibios_chdebug::ch_version' to an array of
uint8_t.
Change-Id: Iaa80e9cb1a65c27512919398b8ffbf14e5c240cd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8473
Tested-by: jenkins
These devices are essentially the same as the E54 series with the
exception of immutable boot (SG41, SG61) and HSM (SG60, SG61), and some
bug fixes found only in E54 revision F. When the security features are
not enabled, they behave identically except for the different DIDs.
Signed-off-by: Matt Trescott <mtc@melexis.com>
Change-Id: Ic93313f3e20af0ed4a5768880d17b335a7b7bb04
Reviewed-on: https://review.openocd.org/c/openocd/+/8355
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Use a command group 'telnet' with subcommands instead of individual
commands with 'telnet_' prefix. Even though there is only one subcommand
at the moment, make this change to ensure consistency with other commands.
The old command is still available to ensure backwards compatibility,
but are marked as deprecated.
Change-Id: I5e88632fa0d0ce5a8129e9fcf5ae743fc5b093cb
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8378
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The current semantics are a bit confusing, as the return value looks
like memcmp (0/false being equal) but the bool return type means one
likely expects true to mean equal. Make this clearer by switching them
out for buf_eq* functions that do that instead.
Checkpatch-ignore: UNSPECIFIED_INT
Change-Id: Iee0c5af794316aab5327cb9c168051fabd3bc1cb
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8490
Tested-by: jenkins
Reviewed-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Backtraces performed by GDB on any thread other than the current
thread would fail if hardware 8 byte ISR stack alignment
was enabled on cortex_m targets. Stack reads now adjust
the stored SP to account for a potential offset introduced by hardware.
Fixed incorrect register offsets for cortex_m Nuttx frames by reading
the TCB info symbols to determine correct offsets.
Fixed offsets can no longer be used since the offsets have changed
multiple times for different Nuttx versions.
Tested on nuttx-12.1.0.
Tested using custom stm32h7 board and custom s32k148 board variants.
Built with CONFIG_ARCH_FPU enabled and disabled to
test FPU and non FPU frame logic.
Change-Id: Ifcbeefb0ddcfbcb528daa9d1d95732ca9584c9ef
Signed-off-by: daniellizewski <daniellizewski@geotab.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8180
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
When a target is reset we must invalidate register caches in order
to avoid showing stale register values or writing them back to
registers. Use EDPRSR.SR to detect a previous reset, and EDPRSR.R to
detect a current reset state.
Change-Id: Ia1e97d7154cf7789d392274eee475733086a835b
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8425
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
This is the fast path for when there is a mismatch in the leading whole
bytes, which means we should return true to indicate not equal like all
the other cases here and in the surrounding functions. Otherwise we'll
incorrectly report _buf1 == _buf2 if and only if there are mismatches in
the leading whole bytes.
This was introduced during the refactor and optimisation referenced
below.
The only in-tree caller of this is jtag_check_value_inner, which will
just fail to catch some errors. However, downstream in riscv-openocd it
gets used in the riscv target to determine whether an IR scan is needed
to select the debug module, and with an IRLEN >= 8 this breaks resetting
if the encoding for the DMI isn't all-ones in its leading whole bytes
(to match BYPASS), since it will believe they are the same and not do an
IR scan, failing (with "At least one TAP shouldn't be in BYPASS mode")
in the subsequent DR scan due to the TAP still being recorded as having
bypass set (and really having an instruction of either BYPASS or
IDCODE).
Fixes: e4ee891759 ("improve buf_cmp and buf_cmp_mask helpers")
Change-Id: Ic4f7ed094429abc4c06a775eb847a8b3ddf2e2d6
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8489
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Two different sizes uint8_t and uint32_t was used for this value
without a good reason.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: I4bb60cc5397ffd0d37e7034e3930e62793140c8d
Reviewed-on: https://review.openocd.org/c/openocd/+/8439
Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com>
Tested-by: jenkins
Could be handy for dummy transfer size detection.
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ibb485218f6c2ff9066910bb58be0fc614b77add3
Reviewed-on: https://review.openocd.org/c/openocd/+/8438
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com>
Use the TRAX interface DEBUGPC if available.
Otherwise use default stop-and-go profiling.
ESP32-S3, before this patch:
Internal: 8 samples/second
FT2232H: 12 samples/second
After this patch:
Internal: 18ksamples/second
FT2232H: 100ksamples/second
Change-Id: I681f0bccf4263c1e24f38be511e3b3aec8bf4d60
Signed-off-by: Richard Allen <rsaxvc@rsaxvc.net>
Reviewed-on: https://review.openocd.org/c/openocd/+/8431
Reviewed-by: Erhan Kurubas <erhan.kurubas@espressif.com>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Ian Thompson <ianst@cadence.com>
Reviewed-by: Yurii Shutkin <yurii.shutkin@gmail.com>
Simplify the code using the target endianness independent API.
Change-Id: I39f720d0db9cf24eb41d7f359e4321bbc2045658
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8474
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Flash banks created in kinetis_create_missing_banks did not populate
bank->minimal_write_gap. The default value of 0 was interpreted as
FLASH_WRITE_CONTINUOUS. This created unnecessary large padding if your
binary had a gap in the populated flash. It also caused flash errors
when loading with GDB because the erroneously padded pages were not
erased first. Tested using an S32k148 using s32k.cfg.
Change-Id: I9b7af698e29ac2c4f5fc8ecd82fa7f4b1a0d43f1
Signed-off-by: daniellizewski <daniellizewski@geotab.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8463
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
When multiple jlink programmers are connected and no specific serial
or USB location is specified, print out the detected serial numbers.
Signed-off-by: Marcus Nilsson <brainbomb@gmail.com>
Change-Id: I280da2b85363f7054c5f466637120427cadcf7d1
Reviewed-on: https://review.openocd.org/c/openocd/+/8356
Reviewed-by: Mark Zhuang <mark.zhuang@spacemit.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Looks like 7f2d3e2925 introduced a regression by incorrectly assigning
threads. The title of the commit message says that the intention was to
"derive threadid from SMP index", this is not what happens, however.
Instead threadid is assigned based on an index of all examined targets
in an SMP group.
This introduces two logical errors.
*Error 1*
Here is the code that assigns threads to harts:
```
foreach_smp_target(head, target->smp_targets) {
struct target *curr = head->target;
if (!target_was_examined(curr))
continue;
threadid_t tid = threads_found + 1;
hwthread_fill_thread(rtos, curr, threads_found, tid);
```
Now, imagine a situation when we have two targets: `target.A` and
`target.B`. Let's assume that `target.A` is NOT examined (it could be
under reset, for example). Then, according to the algorithm when
assigning thread identifiers `target.B` will be assigned tid of 1. The
respected inferior on GDB side will be called `Thread 1`.
Now, imagine that `target.A` activates and succefully examined - OpenOCD
will re-assign thread identifiers. And now on GDB side `Thread 1` will
represent the state of `target.A`. Which is incorrect.
*Error 2*
The reverse mapping between `threadid` and targets does not take the
state of targets into account.
```
static struct target *
hwthread_find_thread(struct target *target, threadid_t thread_id)
...
threadid_t tid = 1;
foreach_smp_target(head, target->smp_targets) {
if (thread_id == tid)
head->target;
++tid;
}
```
So the constructed mapping is incorrect. Since in example above
`Thread 1` will get mapped to `target.A`.
*Solution:*
It seems that threadids should be assigned based on position of the
thread in an smp group disregarding the target state.
Change-Id: Ib93b7ed3bb03696afdf56a105b333e22b9ec69b5
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8471
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Mark Zhuang <mark.zhuang@spacemit.com>
Tested-by: jenkins
Reviewed-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
If no mask is given, the value in the option register is replaced
completely. If a mask is set, only those bits that are set in the mask
are transferred into the option register; the others remain unchanged.
Change-Id: If488a10f92d7dcc0e0f192aef5e67c255fd529c3
Signed-off-by: Ondřej Hošek <ondra.hosek@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8466
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Use mbstowcs() to get required length of wide character string and
include space for terminating null wide character.
Change-Id: I668de6f0acc9b3ec5aca033d870dd9ef354f9077
Signed-off-by: Marcus Nilsson <brainbomb@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8232
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Integer values are interpreted by TCL as decimal, binary, octal
or hexadecimal if prepended with '0d', '0b', '0o' or '0x'
respectively.
The case of '0' prefix has been interpreted as octal till TCL 8.6
but is interpreted as part of a decimal number by JimTCL and from
TCL 9.
Align str_to_buf() to latest TCL syntax by:
- addding support for '0d', '0b' and '0o' prefix;
- dropping support for '0' prefix.
Change-Id: I708ef72146d75b7bf429df329a0269cf48700a44
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8465
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Instead of making people type this in all the time, just default to
"SEGGER RTT" so more things work out of the box.
Change-Id: I147142cf0a755e635d3f66e047be2eb5049cf511
Signed-off-by: Karl Palsson <karl.palsson@marel.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8354
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Open output file in binary mode to disable EOL
conversion on Windows (and sometimes cygwin depending
on installation settings and path).
Change-Id: I38276dd1af011ce5781b0264b7cbb08c32a1a2ad
Signed-off-by: Richard Allen <rsaxvc@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8278
Reviewed-by: Karl Palsson <karlp@tweak.au>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
This is useful for setting a reset catch on a CPU that is being
brought out of reset.
Change-Id: Id8fe9bc3f75fd170f207f470a9f3b0faba7f24c1
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8422
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reduce the amount of boilerplate by moving cti_regs into its only
user, making it a local variable and removing the now-redundant
p_val pointer.
Change-Id: I778cc1e960532fae1ac1a952c6ff19c54e578a5f
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8421
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Some targets start up with the sticky overrun bit set. On such targets
we need to clear it in order to avoid subsequent incorrect reads.
Change-Id: I3e939a9e092de6fcea9494d3179a3386aa1701d2
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8420
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
While at it, fix some small coding style issues.
Change-Id: Ifb8e78b55d29a06d69a3ce71d12d0040777aef13
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8423
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The function str_to_buf() can be simplified by writing directly
the intermediate results in the output buffer.
Such simplification improves the readability and also makes
scan-build happy, as it does not trigger anymore the warning:
src/helper/binarybuffer.c:328:8: warning: Use of memory
allocated with size zero [unix.Malloc]
if ((b256_buf[(buf_len / 8)] & mask) != 0x0) {
Change-Id: I1cef9a1ec5ff0e5841ba582610f273e89e7a81da
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8396
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Tested-by: jenkins
The name 'buf_len' is misleading, as it usually refers to the byte
length of a buffer. Here we use it for the length in bits.
Rename it as 'buf_bitsize'.
While there, fix checkpatch error by changing the index type to
'unsigned int'.
Change-Id: I78855ed79a346d996d9c0100d94d14c64a36b228
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8395
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
With 'radix' always zero and '_detected_radix' always NULL, drop
the two parameters and simplify str_to_buf().
While there:
- drop some redundant assert(),
- drop the re-check for the base prefix,
- simplify str_strip_number_prefix_if_present() and rename it, as
the prefix MUST be present,
- fix a minor typo,
- update the doxygen description of str_to_buf().
Change-Id: I1abdc8ec0587b23881953d3094101c04d5bb1c58
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8394
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
Commit 53b94fad58 ("binarybuffer: Fix str_to_buf() parsing
function") introduces the helper command_parse_str_to_buf() to
parse as number a string on TCL command-line.
The parameter 'radix' can specify the base (decimal, octal,
hexadecimal, or auto-detected).
TCL is supposed to use decimal numbers by default, while octal and
hexadecimal numbers must be prefixed respectively with '0' and
'0x' (or '0X').
This would require the helper to always run auto-detection of the
base, thus always set the 'radix' parameter to zero. This makes
the parameter useless.
Keeping the 'radix' parameter can open the door to future abuse of
TCL syntax, E.g. a command can require an octal value without the
mandatory TCL '0' prefix; the octal value cannot be the result of
TCL expression.
To prevent any future abuse of the 'radix' parameter, drop it.
Change-Id: I88855bd83b4e08e8fdcf86a2fa5ef3269dd4ad57
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8393
Tested-by: jenkins
Reviewed-by: Jan Matyas <jan.matyas@codasip.com>
The telnet 'exit' command is only available in the execution phase of
OpenOCD. Thus, a telnet session cannot be closed via 'exit' if OpenOCD
is started with 'noinit'. Make the 'exit' command always available.
Change-Id: I14447ecde63e579f1c523d606f048ad29cc84a35
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8379
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Do not echo the selected transport to avoid stray and confusing
messages in the output of OpenOCD. For example, the "swd" line here:
Open On-Chip Debugger 0.12.0+dev-00559-ge02f6c1b9-dirty
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
swd
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
While at it, fix some small documentation style issues.
Change-Id: Ie85426c441289bbaa35615dbb7b53f0b5c46cfc0
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8217
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The 'orig_instr' information of software breakpoints is incorrect
because buf_to_hex_str() expects the length of the buffer to be
converted in bits and not bytes.
Change-Id: I9a9ed383a8c25200d461b899749d5259ee4c6e3d
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8218
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
While at it, apply some coding style fixes.
Change-Id: I77a6917a045af733ebe9211ca338952dbd49c89b
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8416
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Antonio Borneo
Walter Ji
Parshintsev Anatoly
Matt Trescott
Marc Schink
Evgeniy Naydanov
Jessica Clarke
daniellizewski
Peter Collingbourne
Tomas Vanek
Richard Allen
Marcus Nilsson
Ondřej Hošek
Karl Palsson
Richard Allen