-noreset: when using several SVF input files in a sequence it is not always
desireable to have a JTAG reset between the execution of the files.
The -noreset option skips this unwanted reset.
-addcycles <x>: some tests rely on a certain number of extra clock cycles
between the actual JTAG commands. The -addcycles option injects a number
x cycles after each SDR instruction.
Signed-off-by: Kai Schmitz <kai.schmitz@advantest.com>
Change-Id: I31932d6041dbc803be00016cd0a4f23fb2e7dbe1
Reviewed-on: https://review.openocd.org/c/openocd/+/7433
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
With the new checkpatch we will not get this type of issues
anymore.
In mean time, let's fix what we have missed during the review
process.
Change-Id: Iecebf9d43f51a29ee09505d360792793afd24b40
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: 53556fcded ("tcl/interface: add Ashling Opella-LD FTDI config files")
Reviewed-on: https://review.openocd.org/c/openocd/+/7530
Tested-by: jenkins
Use correct register name after it has beed changed
in commit 11ee500bff ("target/armv7m: Rename xPSR to xpsr")
Change-Id: I3648848f4b47af2d20d60c3e0ecef78f75f6d605
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/7473
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
The new version modifies it's auto configure in change
https://github.com/msteveb/jimtcl/commit/ccd47be13019
stating:
configure: Default to --full
Now use --minimal and/or --without-ext to disable things.
With such change jimtcl doesn't build anymore as OpenOCD submodule
because of errors linking with new dependencies openssl and zlib.
Use option --minimal to keep the same build configuration as with
former jimtcl 0.81.
Add option --disable-ssl to avoid a build error on system with no
ssl libraries installed. This is already fixed in jimtcl upstream
but not part of 0.82. Note that ssl is not currently used by
OpenOCD.
Change-Id: I0879891dbd083bfbff1e904daf6cd549c3329bbf
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7517
Tested-by: jenkins
The issues have been highlighted while integrated jimtcl 0.82,
but were already present.
While building jimtcl as submodule, OpenOCD generates the file
jimtcl/configure.gnu to pass specific configure flags.
Issue 1: this file is not included in the distribution.
This causes the rebuild from the distribution to have a jimtcl
built with different (the default) configure flags.
With jimtcl 0.82 the new default is to enable all the features,
but a bug causes the build to fail when openssl is not installed
in the build system (the bug is already fixed but after 0.82 [1]).
All these together cause OpenOCD Jenkins to fail the build for
target 'distcheck' with jimtcl 0.82.
Add jimtcl/configure.gnu to OpenOCD distribution's file list.
The build system considers jimtcl/configure.gnu as a temporarily
file that should be removed during 'distclean'.
Issue 2: 'distcheck' set read-only permission to the source files,
including jimtcl/configure.gnu, so 'distclean' fails removing it.
Add a leading '-' to ignore errors while trying to remove the
file.
Issue 3: Now that 'distcheck' properly configures and builds
jimtcl, 'distcheck' still fails because we have enabled jimtcl
json support in [2] and jimtcl 'distclean' fails to properly
remove one object file (fixed after 0.82 [3]).
Make OpenOCD removing the file jimtcl/jsmn/jsmn.o to complete
the execution of 'distcheck'. Add a comment specifying which of
the jimtcl versions are affected.
Change-Id: I2f9153c5a41ba66b989b27c7bc57b38d1744cc29
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Link: [1] https://github.com/msteveb/jimtcl/commit/22277943a19c
Link: [2] 0a36acbf6a ("configure: build jimtcl with json extension")
Link: [3] https://github.com/msteveb/jimtcl/commit/32a488587a3e
Reviewed-on: https://review.openocd.org/c/openocd/+/7527
Tested-by: jenkins
Reviewed-by: zapb <dev@zapb.de>
The macro JIM_EMBEDDED was required to be defined before including
jim.h in applications that embed jimtcl.
This requirement has been dropped in 2010 by removing the file
dos/Embedder-HOWTO.txt from jimtcl in
https://github.com/msteveb/jimtcl/commit/2d8564100c86#diff-3e93fa55e666
Drop the macro definition and the comment that mandates it.
Change-Id: I36883f60f25bb25839e4ebf908159569659764dd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7518
Tested-by: jenkins
Not all compilers nor compiler versions supports the attributes
used in OpenOCD code.
Collect in a single file the workaround to handle them.
Change-Id: I92d871337281169134ce8e40b2064591518be71f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7519
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
- Manual integration of NX support from xt0.2 release
- No new clang static analysis warnings
Signed-off-by: Ian Thompson <ianst@cadence.com>
Change-Id: I95b51ccc83e56c0d4dbf09e01969ed6a4a93d497
Reviewed-on: https://review.openocd.org/c/openocd/+/7356
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
We were previously not zero-initializing ELF segments between p_filesz
and p_memsz (aka BSS). However, this may be necessary depending on the
user's application. Therefore, start doing so.
Change-Id: I5a743390069583aca7ee276f53afeccf2cac0855
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7513
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
A new FreeRTOS symbol xSchedulerRunning was added into the symbol list.
But the doc was not updated accordingly.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Change-Id: If1b18591e2681477ad96f1dea566cc2547097767
Reviewed-on: https://review.openocd.org/c/openocd/+/7531
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
All DIDs are taken from "SAM R34/R35 Errata Sheet" (DS80000834A).
Signed-off-by: Andrew Lalaev <andrey.lalaev@gmail.com>
Change-Id: Ie35f58e61bb02919c0676c91938c90192481d995
Reviewed-on: https://review.openocd.org/c/openocd/+/7521
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
According to the datasheets these MCUs have 40Kb RAM.
Signed-off-by: Andrew Lalaev <andrey.lalaev@gmail.com>
Change-Id: I52b8a0c86035bccd6f3c1a478bb2e558bca4ae86
Reviewed-on: https://review.openocd.org/c/openocd/+/7520
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The driver tries to open mpsse engine for each vid pid
pair in sequence. If more vid/pid pairs are configured and
the USB device does not correspond to the first pair,
the driver shows 'unable to open ftdi device ...' error.
Match vid pid with the whole list as used in jtag_libusb_open()
instead of multiple mpsse_open() in for loop over vid/pid pairs.
Change-Id: I8ef55205be221c727607fe25b81ae21de0d96f02
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7529
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Can be employed by a driver with custom libusb open.
Change-Id: I00c8a01df8780891a8b7c30e2e34ab191acdf9a8
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/7528
Tested-by: jenkins
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
SAM9260 gained good generic infrastructure since 2009. And we always
want "improvements", no need for a TODO item.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Change-Id: I92551ef9d42ee47ad7441f2354587bbb45edc97e
Reviewed-on: https://review.openocd.org/c/openocd/+/7526
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
It was fixed by e94180571 ("at91sam9: factorise cpu support") in 2011.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Change-Id: I95ea149b45a9902424bf9068b4a2830c17ddc6be
Reviewed-on: https://review.openocd.org/c/openocd/+/7525
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Untested, because I don't have a target that implements this.
Change-Id: Iff82c124e7caf8e8960a9da62d8e727afb2c6b8a
Signed-off-by: Tim Newsome <tim@sifive.com>
It is possible for triggers of the same type to support different match
field values, so it is needed to try all the triggers, not just the
first one.
Fixes issue #788.
Signed-off-by: Evgeniy Naydanov evgeniy.naydanov@syntacore.com
Change-Id: I4c9fbc98bae7259377456d9ad8e770232724a592
We should avoid using x16~x31 register in program buffer because there
are no such general purpose registers in RVE(Embedded) extension.
For targets that support rvE, when the parameter increment=0
and count>1 of the read_memory_progbuf function, openocd will cause
an error due to the use of the s2 register.
For example:
{Command} {riscv repeat_read} count address [size=4]
Change-Id: I8b74dcc15cd00a400f2f1354c577a82132394435
Signed-off-by: Hang Xu <xuhang@eswincomputing.com>
* Calculate the FreeRTOS type sizes and offsets more adaptively.
The definition of TickType_t varies between different targets. And it is also related to configUSE_16_BIT_TICKS option.
Thus introduce a new command to make sure we are using a correct ticktype size.
Change-Id: I9e38b331a9f07b96eb9a2c259e32377fca0106ad
Signed-off-by: Chao Du <duchao@eswincomputing.com>
* redundant semicolon.
Change-Id: Ia21f0537e476099d8fe519ef78b3328d14123a38
* Update after review.
Change-Id: I1825185ec9b0557d7e01f34a8f366661b3734aa7
* update doc
Change-Id: I24b21c88b02ca3d76f1362f2545e86c068fc0ec6
---------
Signed-off-by: Chao Du <duchao@eswincomputing.com>
This probably crept in when merging in upstream in the past.
Change-Id: Iccce4515b6b5d4a90773f6d432754b065fb240bb
Signed-off-by: Tim Newsome <tim@sifive.com>
in raspberrypi-native.cfg
Fixes: bec6c0eb09 (tcl/interface: universal config for all Raspberry Pi models)
Signed-off-by: Tomas Deingruber <Deingruber.Tomas@gmail.com>
Change-Id: I632c8acd84974937849b5fdf2943239def17bd6d
Reviewed-on: https://review.openocd.org/c/openocd/+/7512
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
We currently fail the transfer when issuing more than 255 transactions
at once, e.g.
> read_memory 0x10000000 32 256
CMSIS-DAP transfer count mismatch: expected 257, got 1
This is because the protocol only supports 255 transactions per packet
(65535 for block transactions), and as a result we truncate the
transaction count when assembling the packet. Fix it by running the
queue when we hit the limit.
Change-Id: Ia9e01e3af5ad035f2cf2a32292c9d66e57eafae9
Signed-off-by: Peter Collingbourne <pcc@google.com>
Fixes: 40bac8e8c4 ("jtag/drivers/cmsis_dap: improve USB packets filling")
Reviewed-on: https://review.openocd.org/c/openocd/+/7483
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The OpenOCD commands produce their TCL text result through the
pair command_print() and command_print_sameline().
The latter is used to concatenate output in a single line.
At the end of a sequence of command_print(), the last LF is taken
as part of the command result, while it is not always needed, and
it is even annoying when the output of two commands needs to be
concatenate in a single line.
Using command_print_sameline() in place of the last call to
command_print() would solve the problem but it's quite expensive
in term of coding to fix all the existing commands.
Drop the last LF, if present.
Commands that would specifically need a LF as last char, can add
an extra LF at the end of the output.
Document this behavior in command.h.
Change-Id: I6757c20fbfce923dd393083146e8d5a1f3b790b4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7471
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Choosing to grab the latest version of each component. I'd rather deal
with the rare failure that causes, than realize that we've been testing
against really old stuff.
Change-Id: I17321d70e2b54086e8f3fbb01744746633d7a119
Signed-off-by: Tim Newsome <tim@sifive.com>
The 'current thread' was not set when no FreeRTOS task created. Which could lead a wrongly invoking of freertos_get_thread_reg_list.
Change-Id: I0e0f8327080ef698d7ed4aae5ac2a630d532ddeb
Signed-off-by: Chao Du <duchao@eswincomputing.com>
* target/riscv: hide_csrs configuration option
This option allows users to mark certain CSRs as hidden so they could be
expluded from *reg* output and target.xml
Change-Id: Iddf8456cd3901f572f8590329ebba5229974d24a
* Update doc/openocd.texi
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
* Update src/target/riscv/riscv.c
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
---------
Signed-off-by: Anatoly Parshintsev <114445139+aap-sc@users.noreply.github.com>
Co-authored-by: Jan Matyas <50193733+JanMatCodasip@users.noreply.github.com>
* Add command "exec_progbuf"
Command "exec_progbuf" allows to execute a user-specified sequence
of instructions using the program buffer.
Change-Id: If3b9614129d0b6fcbc33fade29d3d60b35e52f98
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
* Updated the doc:
- Minor reword and reorder of the sentences.
- Added information about C-instructions in progbuf.
- Fixed a typo (per the review).
- Added examples.
Change-Id: I88c9a3ff3c6b60614be7eafd3a6f21be722a77b7
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
* Cosmetic changes
Change-Id: I7135c9f435f640e189c7d7922a2702814dfd595f
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
---------
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
Co-authored-by: Jan Matyas <jan.matyas@codasip.com>
Kai Schmitz
Antonio Borneo
Marc Schink
Ian Thompson
Peter Collingbourne
Chao Du
Andrew Lalaev
Tomas Vanek
Wolfram Sang
Tim Newsome
Evgeniy Naydanov
Hang Xu
Chao Du
Tomas Deingruber
Daniel Anselmi
Anatoly Parshintsev
Jan Matyas