Refactor (clean up) the code in riscv_semihosting.c by moving
the magic sequence detection to its own function.
Cleanup the debug prints denoting the semihosting outcome
so that they are easier to understand when reading the OpenOCD's
verbose (debug) log.
Use le_to_h_u32() to convert memory buffer to instruction code
because RISC-V instructions are always little endian.
(target_buffer_get_u32() was incorrect for that reason.)
Change-Id: I3a3ce991336ceeeff023d459d0e28558059554e0
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
The macro named LIST_HEAD() clashed with a macro of same name in
the GNU libc file sys/queue.h.
This causes a warning in MacOS build due to some other system file
including sys/queue.h.
Rename LIST_HEAD() as OOCD_LIST_HEAD().
Checkpatch-ignore: MACRO_ARG_REUSE
Change-Id: Ic653edec77425a58251d64f56c9f5f6c645ba0cd
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Andrew Shelley <ashelley@btinternet.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8683
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Andy <andrewjohnshelley@gmail.com>
"make dist" was broken because GNU Make was using a built-in rule
to try to build angie from angie.c . This is a limitation in Automake
when you add a whole subdir with the same name to EXTRA_DIST.
The Automake doc actually discourages adding whole subdirs.
Change-Id: I85ea4ecbd529b060c70f83bcfda7522e1730480d
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8600
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
No driver directly working with the USB hardware needs additional
time to complete the write op, they always return transfer complete
status immediately after submitting the transfer.
Although there is implemented correct waiting path in cmsis_dap_usb_write()
it was marked by error logs to catch any suspicious behaviour during
debugging of asynchronous libusb transfers.
However there are drivers which need waiting to finish write op:
at least usbipd-win, IP tunnelled USB driver, was reported
to flood the log with the related errors.
Change LOG_ERROR to LOG_DEBUG_IO in the code waiting to finish write op.
Reported-by: Quentis Ghyll <quentisgh@gmail.com>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Iedf2c96d851f22e694efaf13a2d6a2a408cee1ad
Reviewed-on: https://review.openocd.org/c/openocd/+/8640
Tested-by: jenkins
CMSIS-DAP bulk backend read op used two timeouts: transfer timeout
used in libusb_fill_bulk_transfer() and wait timeout used optionally
in libusb_handle_events_timeout_completed().
The real usage is limited to two cases only:
1) blocking read: the same timeout is used for both transfer
and wait
2) non-blocking read: transfer timeout is used in
libusb_fill_bulk_transfer(),
libusb_handle_events_timeout_completed() is called with zero timeout.
Use blocking flag as read op parameter to distinguish between
these two cases.
See also [1]
Link: [1] 8596: jtag: cmsis_dap: include helper/time_support.h | https://review.openocd.org/c/openocd/+/8596
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Change-Id: Ia755f17dc72bb9ce8e02065fee6a064f8eec6661
Reviewed-on: https://review.openocd.org/c/openocd/+/8639
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Variable `target->semihosting` is always initialized
in risv_init_target() to a non-NULL value.
For that reason, checks like `if (target->semihosting)`
are redundant (dead code).
Remove them to not confuse code readers. Replace them by assertions.
Change-Id: I85ef52300e240cfcb0119db6169993bc4767de8f
Signed-off-by: Jan Matyas <jan.matyas@codasip.com>
I successfully programmed a NUCLEO-C071RB with these changes.
Change-Id: Ib57a77fa18f8a0e8c882e2250d6111c588d76887
Signed-off-by: David (Pololu) <dev-david@pololu.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8525
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
The commit bb2fc63357 ("configure.ac: enable the Dummy adapter
by default") breaks the building dependency between bitbang code
and dummy adapter.
Fix it.
Change-Id: I47587ef61d6b57b2547f6c2600d8404cad87f584
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reported-by: Jonathan Forrest <jonyscathe@gmail.com>
Fixes: bb2fc63357 ("configure.ac: enable the Dummy adapter by default")
BugLink: https://sourceforge.net/p/openocd/tickets/446/
Reviewed-on: https://review.openocd.org/c/openocd/+/8682
Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
Tested-by: jenkins
Reviewed-by: Andy <andrewjohnshelley@gmail.com>
Use LOG_TARGET_xxx() for log messages as it is used for other targets.
While at it, rework the log messages, for example by removing spaces
or punctuation marks at the end of the message.
Change-Id: I3dd4314d354b5628144f98325540926981778616
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8665
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use LOG_TARGET_xxx() to indicate which target the message belongs to.
Change-Id: Ib1cd37fe6eca2ea42095d2d371116446a936e20a
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8664
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use LOG_TARGET_xxx() for log messages as it is used for other targets.
Change-Id: Ia7e9629d89f2e6cb3f9c156e74ac1a02960f9373
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8663
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Use LOG_TARGET_xxx() for log messages as it is used for other targets.
Change-Id: I2f937c937a5c09d91dc82b4323be3276ab60b01a
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8662
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Add a target-related log function for user messages as it already
exists for other log levels.
Change-Id: I9076677d6451b900332583e748bab3f83df56d3b
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8661
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Previously, Linux assigned gpiochip numbers sequentially depending on
when the chip driver was probed. As RP1 is on the end of a PCIe link, it
is probed later than the on-board chips (including expanders connected
over SPI/I2C). This meant that RP1's gpiochip assignment was at an
offset that could potentially change.
A downstream kernel patch now assigns fixed offsets for RP1 and the
onboard gpiochips. Query the device tree to get proper GPIO_CHIP index.
Change-Id: I759978d4b3021c815a7d9febb41961cd1d3d185c
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: https://review.openocd.org/c/openocd/+/8650
Reviewed-by: Jonathan Bell <jonathan@raspberrypi.com>
Tested-by: jenkins
Tested with NUCLEO-U083RC development board.
Change-Id: Iec668b45166543adcd1fa5077d41c57a35d3becf
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8648
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
If a sufficient delay was used before reading `abstractcs` during the
batch execution, `dm->abstract_cmd_maybe_busy` was not cleared and the
following call to `wait_for_idle_if_needed()` (e.g. on `resume`), would
result in a call to `wait_for_idle()` performing a redundant read of
`abstractcs`.
While this is not a bug, it impedes the performance.
Change-Id: I9d234ef6d53af96c60892d71247c10e631dfcc3b
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
This patch adds support for the nRF54L15 development kit from Nordic
Semiconductor.
Change-Id: I5e362227fed3982ef21f36e41aade196e0ac7031
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8610
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The RISC-V coprocessor is currently not supported. It is attached to the
DAP via AP#2 but the AP implementation is unknown.
The nRFL54L series uses resistive RAM (RRAM) as non-volatile memory
which can be programmed directly. Since it does not fit in the current
flash memory infrastructure of OpenOCD there is no NVM support so far.
Change-Id: I9934af4fd3bb8b7272954fc4b17638c7dabbbee0
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8609
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Remove the prefix since it is redundant.
Change-Id: Ib064d1031f5ad14ed7711c09bb5f5254d0054d59
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8633
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Remove the prefix since it is redundant.
Change-Id: Ieecfb3583d484847514f1298e819ccf6d26abd84
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8632
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Remove the prefix since it is redundant. While at it, also
get rid of the useless exclamation mark.
Change-Id: I16fd6a88b533fac19b4c622cf9740fd32ba7892c
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8611
Reviewed-by: Richard Allen <rsaxvc@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Suggested during review https://review.openocd.org/c/openocd/+/8533
Only the OS part was being checked anyway.
The aim is to facilitate merging all $host_os checks in the future.
Change-Id: Idce1d5872cf19ef423429fa0c3b2ff7ee3945332
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8607
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The Dummy adapter is useful when developing generic JimTcl code.
Besides, the distributed BUGS file states that you should
try to reproduce any crashes with the Dummy adapter, so
it does not make sense that it is not enabled by default.
Change-Id: I145de06de4d2c0011619b1b941200b63e200db23
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8608
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Change the type of task_name[] to char in order to drop a cast.
Change-Id: I233fc862e972e52130fd4ffcb29a3da36f4f8923
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8599
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Tested-by: jenkins
Using strcpy is potentially dangerous so just use a safer and easier way
to do the same.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Change-Id: Id85f3b7f8af1eaf14c9951ae710546d2437c70b5
Reviewed-on: https://review.openocd.org/c/openocd/+/8597
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
The command 'arm core_state' uses the enum in 'arm->core_state' as
an index in the table of strings to print the core state.
With [1] the enum has been extended with the new state for AArch64
but not the corresponding table of strings.
This causes an access after the limit of arm_state_strings[].
Rewrite the table using c99 array designators to better show the
link between the enum list and the table.
Add the function arm_core_state_string() to check for out-of-bound
values allover the file.
Change-Id: I06473c2c8088b38ee07118bcc9e49bc8eafbc6e2
Fixes: [1] 9cbfc9feb3 ("arm_dpm: Add new state ARM_STATE_AARCH64")
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8594
Tested-by: jenkins
The log messages are very inconsistent across the code base. Add a
guideline for log messages to help improve consistency. The guideline is
based on the most commonly used style in the current code base.
Change-Id: I076d68abe588dd04b59580379e97b82d537def23
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8576
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
rtt_write_channel may write less data than requested,
default device buffer size for channel 0 is 16 bytes,
so currently anything larger than this is dropped.
This fix implements per connection buffer and uses the
connection->input_pending flag to retry writes.
Change-Id: I00c845fccb0248550ad0f0fd9cda7bac7976b92b
Signed-off-by: fanoush <fanoush@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8360
Reviewed-by: zapb <dev@zapb.de>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
During the ./configure build stage, error './configure.gnu: line 1: -e:
command not found' can occur.
Problem: the -e flag with echo is not portable. While some shells support
it (e.g., Bash), others (e.g., POSIX /bin/sh on some systems) do not.
Solution: replacing echo -e with printf, since printf is POSIX-compliant
and works consistently across different shells.
Change-Id: I9efbba662599a61bbe1fc56a33dc1ee7ad58826c
Signed-off-by: Pete Moore <pmoore@mozilla.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8653
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
https://review.openocd.org/c/openocd/+/8439 changed variable `words`
from uint8_t to unsigned int in sfdp.c but failed to update the
LOG_DEBUG line to reflect the new type. On macOS this caused:
src/flash/nor/sfdp.c:107:28: error: format specifies type 'unsigned
char' but the argument has type 'unsigned int' [-Werror,-Wformat]
The formatting of the debug line has been updated to reflect the updated
type.
Change-Id: Ifc7ddb1279ab2603901c969d9c09af847f3a3caf
Signed-off-by: Pete Moore <pmoore@mozilla.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/8660
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
* Registers were not invalidated if the hart became unavailable.
* Improved logging in the case register invalidation involves loss of
information.
Change-Id: Icfb5e190dd6dcb1a97e4d314d802466cab7a01e4
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
Evgeniy Naydanov
Evgeniy Naydanov
Jan Matyas
Samuel Obuch
Antonio Borneo
R. Diez
Tomas Vanek
David (Pololu)
Marc Schink
Paul Fertser
fanoush
Pete Moore
Farid Khaydari